torque-client-x11 2.4.16+dfsg-1.5 / usr / lib / xpbs / misc.tk

#         OpenPBS (Portable Batch System) v2.3 Software License
# 
# Copyright (c) 1999-2000 Veridian Information Solutions, Inc.
# All rights reserved.
# 
# ---------------------------------------------------------------------------
# For a license to use or redistribute the OpenPBS software under conditions
# other than those described below, or to purchase support for this software,
# please contact Veridian Systems, PBS Products Department ("Licensor") at:
# 
#    www.OpenPBS.org  +1 650 967-4675                  sales@OpenPBS.org
#                        877 902-4PBS (US toll-free)
# ---------------------------------------------------------------------------
# 
# This license covers use of the OpenPBS v2.3 software (the "Software") at
# your site or location, and, for certain users, redistribution of the
# Software to other sites and locations.  Use and redistribution of
# OpenPBS v2.3 in source and binary forms, with or without modification,
# are permitted provided that all of the following conditions are met.
# After December 31, 2001, only conditions 3-6 must be met:
# 
# 1. Commercial and/or non-commercial use of the Software is permitted
#    provided a current software registration is on file at www.OpenPBS.org.
#    If use of this software contributes to a publication, product, or
#    service, proper attribution must be given; see www.OpenPBS.org/credit.html
# 
# 2. Redistribution in any form is only permitted for non-commercial,
#    non-profit purposes.  There can be no charge for the Software or any
#    software incorporating the Software.  Further, there can be no
#    expectation of revenue generated as a consequence of redistributing
#    the Software.
# 
# 3. Any Redistribution of source code must retain the above copyright notice
#    and the acknowledgment contained in paragraph 6, this list of conditions
#    and the disclaimer contained in paragraph 7.
# 
# 4. Any Redistribution in binary form must reproduce the above copyright
#    notice and the acknowledgment contained in paragraph 6, this list of
#    conditions and the disclaimer contained in paragraph 7 in the
#    documentation and/or other materials provided with the distribution.
# 
# 5. Redistributions in any form must be accompanied by information on how to
#    obtain complete source code for the OpenPBS software and any
#    modifications and/or additions to the OpenPBS software.  The source code
#    must either be included in the distribution or be available for no more
#    than the cost of distribution plus a nominal fee, and all modifications
#    and additions to the Software must be freely redistributable by any party
#    (including Licensor) without restriction.
# 
# 6. All advertising materials mentioning features or use of the Software must
#    display the following acknowledgment:
# 
#     "This product includes software developed by NASA Ames Research Center,
#     Lawrence Livermore National Laboratory, and Veridian Information
#     Solutions, Inc.
#     Visit www.OpenPBS.org for OpenPBS software support,
#     products, and information."
# 
# 7. DISCLAIMER OF WARRANTY
# 
# THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. ANY EXPRESS
# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT
# ARE EXPRESSLY DISCLAIMED.
# 
# IN NO EVENT SHALL VERIDIAN CORPORATION, ITS AFFILIATED COMPANIES, OR THE
# U.S. GOVERNMENT OR ANY OF ITS AGENCIES BE LIABLE FOR ANY DIRECT OR INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# 
# This license will be governed by the laws of the Commonwealth of Virginia,
# without reference to its choice of law rules.
################################################################################
# misc: defines the layout and functions of the misc dialog
#             box. Input focus returns to 'callerDialogBox' upon return.
# CONTEXT: executes originally in the context of qsub, but can changed via
#          setting qalter to 1.
proc misc {callerDialogBox {qalter 0}} {
  global LABELFONT miscDialogBox activeWindow def do_qalter

  if {!$qalter} {
    global qsubv ARR def_qsub
    set ARR "qsubv"
    set def def_qsub
  } else {
    global qalterv ARR def_qalter
    set ARR "qalterv"
    set def def_qalter
  }
  global ${ARR}_shellp ${ARR}_shellh ${ARR}_groupg ${ARR}_grouph \
	 ${ARR}_useru ${ARR}_userh

  set do_qalter $qalter
  busy_cursor
## Bring up the standard Dialog box ##
  set miscDialogBox .misc
  set dbox [popupDialogBox $miscDialogBox "Miscellaneous Dialog" 1 "" $callerDialogBox]
  set activeWindow($miscDialogBox) 1
  set dbox_top    [lindex $dbox 0]
  set dbox_bottom [lindex $dbox 1]

## BOTTOM PART ##
  set cmdButtons \
  [buildCmdButtons $dbox_bottom {{{ok ok} {cancel "reset to default"} {help help}}} x 10m 16 3]

  set cmdFrame  [lindex $cmdButtons 0]
  set cmdOk     [lindex $cmdButtons 1]
  set cmdCancel [lindex $cmdButtons 2]
  set cmdHelp [lindex $cmdButtons 3]

  $cmdOk configure -command {

    if [pre_build_misc_opt $ARR $def] {
      return
    }
    destroy $miscDialogBox
  }
  $cmdCancel configure -width 18 \
	-command {
	        if {$do_qalter} {
		  set_default_qalter_misc
		} else {
		  set_default_qsub_misc
		}
		invoke_misc_widgets $ARR
  
		boxLoad [set ${ARR}(shellBox)]
		boxLoad [set ${ARR}(groupBox)]
		boxLoad [set ${ARR}(userBox)]
  	}
  

  $cmdHelp configure -command {xpbs_help misc $miscDialogBox}
## TOP PART ##
  frame $dbox_top.header -height 10m -width 10m
  frame $dbox_top.footer -height 10m -width 10m

  frame $dbox_top.o -relief groove -borderwidth 2
  frame $dbox_top.s -relief groove -borderwidth 2
  frame $dbox_top.g -relief groove -borderwidth 2
  frame $dbox_top.u -relief groove -borderwidth 2

  frame $dbox_top.r2
  frame $dbox_top.r2.sp1



  set spinBox [buildSpinbox $dbox_top.r2.sp1 4 1-9999 ${ARR} \
		 checkpoint_min "CPU minutes" right]
  set manualCkpntMinFrame [lindex $spinBox 0]
  set ${ARR}(manualCkpntMin) [lindex $spinBox 1]
  set ${ARR}(manualCkpntScroll) [lindex $spinBox 2]
  set ${ARR}(manualCkpntLabel)  [lindex $spinBox 3]
 
  register_default_action [set ${ARR}(manualCkpntMin)] $cmdOk

  set radioList [list  [concat manual "every" $manualCkpntMinFrame] \
                       {automatic "when host shuts down"} \
                       {default "at host's default minimum time"} \
                       {nocheck "do not checkpoint"} ]

 pack $dbox_top.r2.sp1
 set radiobox [buildRadioboxes $dbox_top.r2 \
                                [list $radioList] column 0]
  set radioboxFrame      [lindex $radiobox 0]
  set ${ARR}(radioboxManual)    [lindex $radiobox 1]
  set ${ARR}(radioboxAuto)      [lindex $radiobox 2]
  set ${ARR}(radioboxDefault)   [lindex $radiobox 3]
  set ${ARR}(radioboxNoChkpnt)  [lindex $radiobox 4]

  [set ${ARR}(radioboxManual)]  configure -variable ${ARR}(checkpoint_option) \
		 -value "c=" \
                  -command { \
                       enable_spinbox [set ${ARR}(manualCkpntMin)] \
			       [set ${ARR}(manualCkpntScroll)] \
                               [set ${ARR}(manualCkpntLabel)]
                       focus [ set ${ARR}(manualCkpntMin)]
                  }
  [set ${ARR}(radioboxAuto)] configure -variable ${ARR}(checkpoint_option) \
		 -value "s" -command { \
                       disable_spinbox [set ${ARR}(manualCkpntMin)] \
				       [set ${ARR}(manualCkpntScroll)] \
                       		       [set ${ARR}(manualCkpntLabel)]
                  }

  [set ${ARR}(radioboxDefault)] configure -variable ${ARR}(checkpoint_option) \
		 -value "c" -command {
                       disable_spinbox [set ${ARR}(manualCkpntMin)] \
				       [set ${ARR}(manualCkpntScroll)] \
                       		       [set ${ARR}(manualCkpntLabel)]
                  }
  [set ${ARR}(radioboxNoChkpnt)] configure -variable ${ARR}(checkpoint_option) \
		 -value "n" -command {
                       disable_spinbox [set ${ARR}(manualCkpntMin)] \
				       [set ${ARR}(manualCkpntScroll)] \
                       		       [set ${ARR}(manualCkpntLabel)]
                  }


  frame $dbox_top.o.rerun
  set rbox [buildRadioboxes $dbox_top.o.rerun \
                { {{y "rerunnable"} {n "not rerunnable"}} } grid 0 ""]
  set rerunValFrame [lindex $rbox 0]
  set ${ARR}(rerunY) [lindex $rbox 1]
  set ${ARR}(rerunN) [lindex $rbox 2]

  [set ${ARR}(rerunY)] configure -variable ${ARR}(rerunnable) -value y
  [set ${ARR}(rerunN)] configure -variable ${ARR}(rerunnable) -value n

  pack forget $rerunValFrame
  set chkboxList [list  [concat chkpnt \"Checkpoint Job\" $radioboxFrame] \
                        [concat mark \"Mark Job as\" $rerunValFrame]]

  pack $dbox_top.r2 -in $dbox_top.o
  set chkbox [buildCheckboxes $dbox_top.o \
                   [list $chkboxList] column 0 "Job Attributes" 0 1]
  set chkboxFrame  [lindex $chkbox 0]
  set ${ARR}(chkboxChkpnt) [lindex $chkbox 1]
  set ${ARR}(chkboxMark)   [lindex $chkbox 2]

  [set ${ARR}(chkboxChkpnt)] configure -variable ${ARR}(checkpoint_job) \
               -command {
                 if {[set ${ARR}(checkpoint_job)]} {
                   enable_rcbuttons [set ${ARR}(radioboxManual)] \
			[set ${ARR}(radioboxAuto)] \
                        [set ${ARR}(radioboxDefault)] \
			[set ${ARR}(radioboxNoChkpnt)]
                   if {[string compare [set ${ARR}(checkpoint_option)] "c="] == 0} {
                     [set ${ARR}(radioboxManual)] invoke
                   }
                 } else {
                   disable_rcbuttons [set ${ARR}(radioboxManual)] \
				     [set ${ARR}(radioboxAuto)] \
                                     [set ${ARR}(radioboxDefault)] \
				     [set ${ARR}(radioboxNoChkpnt)]
                   disable_spinbox [set ${ARR}(manualCkpntMin)] \
			 	   [set ${ARR}(manualCkpntScroll)] \
                       	           [set ${ARR}(manualCkpntLabel)]
                 }
               }

  [set ${ARR}(chkboxMark)] configure -variable ${ARR}(rerun) -command {
     if {[set ${ARR}(rerun)]} {
       enable_rcbuttons [set ${ARR}(rerunY)] [set ${ARR}(rerunN)]
     } else {
       disable_rcbuttons [set ${ARR}(rerunY)] [set ${ARR}(rerunN)]
     }
  }

## SHELL
  box $dbox_top.s -title "Shell Path List" \
        -entrylabels {shell_path host} \
        -lboxwidths {15 15} -lboxheights {3 3} \
        -lboxlabels {{Shell Paths:} " " } -orient xy \
        -grabBox $miscDialogBox \
	-key {-1} \
        -array 0 ${ARR}_shellp \
        -array 1 ${ARR}_shellh
  boxLoad $dbox_top.s
  set ${ARR}(shellBox) $dbox_top.s

  box $dbox_top.g -title "Group List" \
        -entrylabels {group host} \
        -lboxwidths {15 15} -lboxheights {3 3} \
        -lboxlabels {Groups: " " } -orient xy \
        -grabBox $miscDialogBox \
	-key {-1} \
        -array 0 ${ARR}_groupg \
        -array 1 ${ARR}_grouph
  boxLoad $dbox_top.g
  set ${ARR}(groupBox) $dbox_top.g

  box $dbox_top.u -title "User List" \
        -entrylabels {user host} \
        -lboxwidths {15 15} -lboxheights {3 3} \
        -lboxlabels {Usernames: " " } -orient xy \
        -grabBox $miscDialogBox \
	-key {-1} \
        -array 0 ${ARR}_useru \
        -array 1 ${ARR}_userh
  boxLoad $dbox_top.u
  set ${ARR}(userBox) $dbox_top.u

## PACK the FRAMES
  frame $dbox_top.t
  frame $dbox_top.b
  pack $dbox_top.o $dbox_top.s -side left -padx 2m -pady 5m -in $dbox_top.t
  pack $dbox_top.u $dbox_top.g -side left -padx 2m -pady 5m -in $dbox_top.b
  raise $dbox_top.o $dbox_top.t
  raise $dbox_top.s $dbox_top.t
  raise $dbox_top.u $dbox_top.b
  raise $dbox_top.g $dbox_top.b
  raise $dbox_top.r2 $dbox_top.o
  raise $dbox_top.r2 $dbox_top.t
  raise $dbox_top.r2 $dbox_top.b
  pack $dbox_top.t $dbox_top.b -side top

  register_default_action $miscDialogBox $cmdOk
  focus $miscDialogBox

## INVOKE the widgets
  invoke_misc_widgets $ARR

  tkwait visibility $miscDialogBox
  remove_busy_cursor
  catch {tkwait window $miscDialogBox}

  set activeWindow($miscDialogBox) 0
  focus $callerDialogBox
  catch {grab $callerDialogBox}
}

# pre_build_misc_opt: builds the misc options suitable for processing by
#       either qsub or qalter. RETURNS: 1 if an error is detected; 0 otherwise.
proc pre_build_misc_opt {array def_array} {
    upvar $array ARR
    upvar $def_array DEF

    global miscDialogBox \
  	   ${array}_shellp ${array}_shellh ${array}_groupg ${array}_grouph \
	   ${array}_useru ${array}_userh

    if [regexp "qsub" $array] {
      init_qsub_misc_argstr
    } else {     
      init_qalter_misc_argstr
    }

    if {[string compare $ARR(checkpoint_job) $DEF(checkpoint_job)] != 0 && \
        $ARR(checkpoint_job)} {

     switch -exact -- $ARR(checkpoint_option) {
       "c=" {

          if {[string compare $ARR(checkpoint_min) $DEF(checkpoint_min)] != 0} {
            set ARR(checkpoint_arg) \
		  "$ARR(checkpoint_option)$ARR(checkpoint_min)"
          } elseif {[string compare $ARR(checkpoint_min) ""] == 0} {
            popupInfoBox $miscDialogBox "Please specify the checkpoint interval (in mins)."
	    return 1
	  }
       }
       default {
          set ARR(checkpoint_arg) $ARR(checkpoint_option)
       }
     }
    }

    if { $ARR(rerun)} {
        set ARR(rerun_args) $ARR(rerunnable)
    }

    set size 0
    if [info exists ${array}_shellp] {
      set size [array size ${array}_shellp]
    }
    for {set i 0} {$i < $size} {incr i} {

      if { [trimvar "@," ${array}_shellp($i)] || \
	   [trimvar "@," ${array}_shellh($i)] } {
          popupInfoBox $miscDialogBox "Detected an illegal character \"@\" or\
	    \",\" in shell path name or host entry [expr $i+1]. Please remove."
        return 1
      }

      set shellp [set ${array}_shellp($i)]
      set shellh [set ${array}_shellh($i)]

      if {[string compare $shellp ""] == 0 && \
          [string compare $shellh ""] != 0} {
  	popupInfoBox $miscDialogBox "Shell path list entry [expr $i+1] is incomplete"
	return 1
      }

      if {[string compare $shellh ""] != 0 || \
          [string compare $shellp ""] != 0} {

        if [info exists shellHostCnt($shellh)] {
            incr shellHostCnt($shellh)
            if {$shellHostCnt($shellh) > 1} {
	      popupInfoBox $miscDialogBox "Shell path entry [expr $i+1]. . . Must provide only one unique shell path per host"
	      return 1
            }
        } else { 
            set shellHostCnt($shellh) 1
        }

	if {[string compare $shellh ""] == 0} {
          set shellpath($i) "$shellp"
	} else {
          set shellpath($i) "$shellp@$shellh"
        }
      }
    }
    set ARR(shell_args) [construct_array_args shellpath ","]

    set size 0
    if [info exists ${array}_useru] {
      set size [array size ${array}_useru]
    }
    for {set i 0} {$i < $size} {incr i} {

      if { [trimvar "@," ${array}_useru($i)] || \
	   [trimvar "@," ${array}_userh($i)] } {
          popupInfoBox $miscDialogBox "Detected an illegal character \"@\" or\
	    \",\" in user name or host entry [expr $i+1]. Please remove."
        return 1
      }

      set useru  [set ${array}_useru($i)]
      set userh  [set ${array}_userh($i)]

      if {[string compare $useru ""] == 0 && \
          [string compare $userh ""] != 0} {
	popupInfoBox $miscDialogBox "User list entry [expr $i+1] is incomplete"
        return 1
      }	 

      if {[string compare $useru ""] != 0 || \
          [string compare $userh ""] != 0} {

        if [info exists userHostCnt($userh)] {
          incr userHostCnt($userh)
	  if {$userHostCnt($userh) > 1} {
	    popupInfoBox $miscDialogBox "User list entry [expr $i+1]. . .Must provide only one unique username per host."
	    return 1
          }
        } else { 
          set userHostCnt($userh) 1 
        }
	if {[string compare $userh ""] == 0} {
          set userlist($i) "$useru"
	} else {
          set userlist($i) "$useru@$userh" 
	}
      }
    }
    set ARR(user_args) [construct_array_args userlist ","]

    set size 0
    if [info exists ${array}_groupg] {
      set size [array size ${array}_groupg]
    }
    for {set i 0} {$i < $size} {incr i} {

      if { [trimvar "@," ${array}_groupg($i)] || \
	   [trimvar "@," ${array}_grouph($i)] } {
          popupInfoBox $miscDialogBox "Detected an illegal character \"@\" or\
	    \",\" in group name or host entry [expr $i+1]. Please remove."
        return 1
      }

      set groupg [set ${array}_groupg($i)]
      set grouph [set ${array}_grouph($i)]

      if {[string compare $groupg ""] == 0 && \
          [string compare $grouph ""] != 0} {
	popupInfoBox $miscDialogBox "Group list entry [expr $i+1] is incomplete"
	return 1
      }

      if {[string compare $grouph ""] != 0 || \
          [string compare $groupg ""] != 0} {	 
        if [info exists groupHostCnt($grouph)] {
          incr groupHostCnt($grouph)
          if {$groupHostCnt($grouph) > 1} {
	    popupInfoBox $miscDialogBox "Group list entry [expr $i+1]. . .Must provide only one unique group per host."
	    return 1
	  }
        } else {
          set groupHostCnt($grouph) 1
        }
	if {[string compare $grouph ""] == 0} {
          set grouplist($i) "$groupg"
	} else {
          set grouplist($i) "$groupg@$grouph"
	}
      }
    }
  
    set ARR(group_args) [construct_array_args grouplist "," "group_list="]

    catch {unset shellHostCnt}
    catch {unset userHostCnt}
    catch {unset groupHostCnt}
    catch {unset shellpath}
    catch {unset grouplist}
    catch {unset userlist}

    return 0
}
# invoke_misc_widgets: invoke the various widgets found in the Miscellaneous
#                        dialog box.
proc invoke_misc_widgets assoc_array {
  upvar $assoc_array arr

  invoke_rbutton [list $arr(radioboxManual)  $arr(radioboxAuto) \
  		       $arr(radioboxDefault) $arr(radioboxNoChkpnt)]
  invoke_cbutton $arr(chkboxChkpnt)
  
  invoke_cbutton $arr(chkboxMark)
}