openafs-dbserver 1.6.15-1ubuntu1 / usr / sbin / afs-newcell

#!/usr/bin/perl -w
# Copyright (C) 2000 by Sam Hartman
# This file may be copied either under the terms of the GNU GPL or the IBM
# Public License either version 2 or later of the GPL or version 1.0 or later
# of the IPL.

use Term::ReadLine;
use strict;
use Debian::OpenAFS::ConfigUtils;
use Getopt::Long;
use Socket qw(inet_ntoa);
use vars qw($admin $server $requirements_met $shutdown_needed);
my $rl = new Term::ReadLine('afs-newcell');

# The default file server options are poor.  Until they've been updated, use
# the following from Harald Barth; it should be an improvement for most
# people.
my $fs_options = '-p 23 -busyat 600 -rxpck 400 -s 1200 -l 1200 -cb 65535'
    . ' -b 240 -vc 1200';

=head1  NAME

afs-newcell - Set up initial database server for AFS cell

=head1 SYNOPSIS

B<afs-newcell> [B<--requirements-met>] [B<--admin> admin_user]

=head1 DESCRIPTION

This script sets up the initial AFS database and configures the first
database/file server.

The B<--requirements-met> option specifies that the initial requirements have
been met and that the script can proceed without displaying the initial
banner or asking for confirmation.

The B<--admin> option specifies the name of the administrative user.  This
user will be given system:administrators and susers permission in the cell.

=head1 AUTHOR

Sam Hartman <hartmans@debian.org>

=cut

# Flush all output immediately.
$| = 1;

GetOptions ("requirements-met" => \$requirements_met, "admin=s" => \$admin);

unless ($requirements_met) {
    print <<eoreqs;
                            Prerequisites

In order to set up a new AFS cell, you must meet the following:

1) You need a working Kerberos realm with Kerberos4 support.  You
   should install Heimdal with KTH Kerberos compatibility or MIT
   Kerberos 5.

2) You need to create the single-DES AFS key and load it into
   /etc/openafs/server/KeyFile.  If your cell's name is the same as
   your Kerberos realm then create a principal called afs.  Otherwise,
   create a principal called afs/cellname in your realm.  The cell
   name should be all lower case, unlike Kerberos realms which are all
   upper case.  You can use asetkey from the openafs-krb5 package, or
   if you used AFS3 salt to create the key, the bos addkey command.

3) This machine should have a filesystem mounted on /vicepa.  If you
   do not have a free partition, then create a large file by using dd
   to extract bytes from /dev/zero.  Create a filesystem on this file
   and mount it using -oloop.

4) You will need an administrative principal created in a Kerberos
   realm.  This principal will be added to susers and
   system:administrators and thus will be able to run administrative
   commands.  Generally the user is a root or admin instance of some
   administrative user.  For example if jruser is an administrator then
   it would be reasonable to create jruser/admin (or jruser/root) and
   specify that as the user to be added in this script.

5) The AFS client must not be running on this workstation.  It will be
   at the end of this script.

eoreqs
#'# cperl-mode

    $_ = $rl->readline("Do you meet these requirements? [y/n] ");
    unless (/^y/i ) {
        print "Run this script again when you meet the requirements\n";
        exit(1);
    }

    if ($> != 0) {
        die "This script should almost always be run as root.  Use the\n"
            . "--requirements-met option to run as non-root.\n";
    }
}

# Make sure the AFS client is not already running.
open(MOUNT, "mount |") or die "Failed to run mount: $!\n";
while(<MOUNT>) {
    if (m:^AFS:) {
        print "The AFS client is currently running on this workstation.\n";
        print "Please restart this script after running"
            . " /etc/init.d/openafs-client stop\n";
        exit(1);
    }
}
close MOUNT;

# Make sure there is a keyfile.
unless ( -f "/etc/openafs/server/KeyFile") {
    print "You do not have an AFS keyfile.  Please create this using\n";
    print "asetkey from openafs-krb5 or the bos addkey command\n";
    exit(1);
}

# Stop the file server.
print "If the fileserver is not running, this may hang for 30 seconds.\n";
run("/etc/init.d/openafs-fileserver stop");

# Get the local hostname.  Use the fully-qualified hostname to be safer.
$server = `hostname -f`;
chomp $server;
my $ip = gethostbyname $server;
if (inet_ntoa($ip) eq '127.0.0.1') {
    print "\n";
    print "Your hostname $server resolves to 127.0.0.1, which AFS cannot\n";
    print "cope with.  Make sure your hostname resolves to a non-loopback\n";
    print "IP address.  (Check /etc/hosts and make sure that your hostname\n";
    print "isn't listed on the 127.0.0.1 line.  If it is, removing it from\n";
    print "that line will probably solve this problem.)\n";
    exit(1);
}

# Determine the admin principal.
$admin = $rl->readline("What administrative principal should be used? ")
    unless $admin;
print "\n";
die "Please specify an administrative user\n" unless $admin;
my $afs_admin = $admin;
$afs_admin =~ s:/:.:g;
if ($afs_admin =~ /@/) {
    die "The administrative user must be in the same realm as the cell and\n"
        . "no realm may be specified.\n";
}

# Determine the local cell.  This should be configured via debconf, from the
# openafs-client configuration, when openafs-fileserver is installed.
open(CELL, "/etc/openafs/server/ThisCell")
    or die "Cannot open /etc/openafs/server/ThisCell: $!\n";
my $cell = <CELL>;
chomp $cell;

# Make sure the new cell is configured in the client CellServDB.
open(CELLSERVDB, "/etc/openafs/CellServDB")
    or die "Cannot open /etc/openafs/CellServDB: $!\n";
my $found = 0;
while (<CELLSERVDB>) {
    next unless /^>\Q$cell\E\s/;
    while (<CELLSERVDB>) {
        last if /^>/;
        my ($dbserver) = split ' ';
        if ($dbserver eq inet_ntoa($ip)) {
            $found = 1;
            last;
        }
    }
    last;
}
unless ($found) {
    print "\n";
    print "The new cell $cell is not configured in /etc/openafs/CellServDB\n";
    print "Add configuration like:\n\n";
    print ">$cell\n";
    print inet_ntoa($ip), "\t\t\t#$server\n\n";
    print "to that file before continuing.\n";
    exit(1);
}

# Write out a new CellServDB for the local cell containing only this server.
if (-f "/etc/openafs/server/CellServDB") {
    print "/etc/openafs/server/CellServDB already exists, renaming to .old\n";
    rename("/etc/openafs/server/CellServDB",
           "/etc/openafs/server/CellServDB.old")
        or die "Cannot rename /etc/openafs/server/CellServDB: $!\n";
}
open(CELLSERVDB, "> /etc/openafs/server/CellServDB")
    or die "Cannot create /etc/openafs/server/CellServDB: $!\n";
print CELLSERVDB ">$cell\n";
print CELLSERVDB inet_ntoa($ip), "\t\t\t#$server\n";
close CELLSERVDB or die "Cannot write to /etc/openafs/server/CellServDB: $!\n";

# Now, we should be able to start bos and add the admin user.
run("/etc/init.d/openafs-fileserver start");
$shutdown_needed = 1;
run("bos adduser $server $afs_admin -localauth");
unwind("bos removeuser $server $afs_admin -localauth");

# Create the initial protection database using pt_util.  This is safer than
# the standard mechanism of starting the cell in noauth mode until the first
# user has been created.
if (-f "/var/lib/openafs/db/prdb.DB0") {
    warn "ERROR: Protection database already exists; cell already partially\n";
    warn "ERROR: created.   If you do not want the current database, remove\n";
    warn "ERROR: all files in /var/lib/openafs/db and then run this program\n";
    warn "ERROR: again.\n";
    exit(1);
}
print "\nCreating initial protection database.  This will print some errors\n";
print "about an id already existing and a bad ubik magic.  These errors can\n";
print "be safely ignored.\n\n";
open(PRDB, "| pt_util -p /var/lib/openafs/db/prdb.DB0 -w")
    or die "Unable to start pt_util: $!\n";
print PRDB "$afs_admin 128/20 1 -204 -204\n";
print PRDB "system:administrators 130/20 -204 -204 -204\n";
print PRDB " $afs_admin 1\n";
close PRDB;
unwind("rm /var/lib/openafs/db/prdb*");
print "\n";

# We should now be able to start ptserver and vlserver.
run("bos create $server ptserver simple /usr/lib/openafs/ptserver -localauth");
unwind("bos delete $server ptserver -localauth");
run("bos create $server vlserver simple /usr/lib/openafs/vlserver -localauth");
unwind("bos delete $server vlserver -localauth");

# Create a file server as well.
run("bos create $server dafs dafs"
    . " -cmd '/usr/lib/openafs/dafileserver $fs_options'"
    . " -cmd /usr/lib/openafs/davolserver"
    . " -cmd /usr/lib/openafs/salvageserver"
    . " -cmd /usr/lib/openafs/dasalvager -localauth");
unwind("bos delete $server dafs -localauth");

# Make sure that there is no scheduled general restart time; it's not needed.
run("bos setrestart $server -time never -general -localauth");

# Pause for a while for ubik to catch up.
print "Waiting for database elections: ";
sleep(30);
print "done.\n";

# Past this point we want to control when bos shutdown happens.
$shutdown_needed = 0;
unwind("bos shutdown $server -localauth -wait");
run("vos create $server a root.afs -localauth");
unwind("vos remove $server a root.afs -localauth");

# We should now be able to bring up the client (it may need root.afs to exist
# if not using dynroot).  We override whatever default cell was configured for
# the client, just in case it was pointing to some other cell.
open(THIS, "> /etc/openafs/ThisCell")
    or die "ERROR: Cannot create /etc/openafs/ThisCell: $!\n";
print THIS "$cell\n";
close THIS or die "ERROR: Cannot write to /etc/openafs/ThisCell: $!\n";
run("/etc/init.d/openafs-client force-start");

# Verify that AFS has managed to start.
my $afs_running = 0;
open(MOUNT, "mount |") or die "ERROR: Failed to run mount: $!\n";
while(<MOUNT>) {
    if (m:^AFS:) {
        $afs_running = 1;
    }
}
unless ($afs_running) {
    print "ERROR: The AFS client failed to start.\n";
    print "ERROR: Please fix whatever problem kept it from running.\n";
    exit(1);
}
print "\n";
print "Now, get tokens as $admin in the $cell cell.\n";
print "Then, run afs-rootvol.\n";

# Success, so clear the unwind commands.
@unwinds = ();

# If we fail before all the instances are created, we need to back out of
# everything we did as much as possible.
END {
    if ($shutdown_needed || @unwinds) {
        print "\nCell setup failed, ABORTING\n";
    }
    system("bos shutdown $server -localauth -wait") if $shutdown_needed;
    run(pop @unwinds) while @unwinds;
}