/usr/share/microhope/firmware/Makefile is in microhope 3.4.2-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 | # Makefile for ATmegaBOOT
# E.Lins, 18.7.2005
# $Id$
#
# Instructions
#
# To make bootloader .hex file:
# make diecimila
# make lilypad
# make ng
# etc...
#
# To burn bootloader .hex file:
# make diecimila_isp
# make lilypad_isp
# make ng_isp
# etc...
# program name should not be changed...
PROGRAM = Bootloader
# enter the parameters for the avrdude isp tool
ISPTOOL = avrisp2
ISPPORT = /dev/tty.PL2303-00001004
ISPSPEED = -b 115200
MCU_TARGET = atmega168
LDSECTION = --section-start=.text=0x3800
# the efuse should really be 0xf8; since, however, only the lower
# three bits of that byte are used on the atmega168, avrdude gets
# confused if you specify 1's for the higher bits, see:
# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
#
# similarly, the lock bits should be 0xff instead of 0x3f (to
# unlock the bootloader section) and 0xcf instead of 0x0f (to
# lock it), but since the high two bits of the lock byte are
# unused, avrdude would get confused.
ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
-e -u -U lock:w:0x3f:m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m
# -U efuse:w:0x$(EFUSE):m
ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \
-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe"
STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \
-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt
STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt
OBJ = $(PROGRAM).o
OPTIMIZE = -O2
DEFS =
LIBS =
CC = avr-gcc
# Override is only needed by avr-lib build system.
override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
override LDFLAGS = -Wl,$(LDSECTION)
#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
all:
lilypad: TARGET = lilypad
lilypad: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3'
lilypad: AVR_FREQ = 8000000L
lilypad: $(PROGRAM)_lilypad.hex
lilypad_isp: lilypad
lilypad_isp: TARGET = lilypad
lilypad_isp: HFUSE = DD
lilypad_isp: LFUSE = E2
lilypad_isp: EFUSE = 00
lilypad_isp: isp
lilypad_resonator: TARGET = lilypad_resonator
lilypad_resonator: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3'
lilypad_resonator: AVR_FREQ = 8000000L
lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex
lilypad_resonator_isp: lilypad_resonator
lilypad_resonator_isp: TARGET = lilypad_resonator
lilypad_resonator_isp: HFUSE = DD
lilypad_resonator_isp: LFUSE = C6
lilypad_resonator_isp: EFUSE = 00
lilypad_resonator_isp: isp
pro8: TARGET = pro_8MHz
pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS'
pro8: AVR_FREQ = 8000000L
pro8: $(PROGRAM)_pro_8MHz.hex
pro8_isp: pro8
pro8_isp: TARGET = pro_8MHz
pro8_isp: HFUSE = DD
pro8_isp: LFUSE = C6
pro8_isp: EFUSE = 00
pro8_isp: isp
pro16: TARGET = pro_16MHz
pro16: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS'
pro16: AVR_FREQ = 16000000L
pro16: $(PROGRAM)_pro_16MHz.hex
pro16_isp: pro16
pro16_isp: TARGET = pro_16MHz
pro16_isp: HFUSE = DD
pro16_isp: LFUSE = C6
pro16_isp: EFUSE = 00
pro16_isp: isp
pro20: TARGET = pro_20mhz
pro20: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS'
pro20: AVR_FREQ = 20000000L
pro20: $(PROGRAM)_pro_20mhz.hex
pro20_isp: pro20
pro20_isp: TARGET = pro_20mhz
pro20_isp: HFUSE = DD
pro20_isp: LFUSE = C6
pro20_isp: EFUSE = 00
pro20_isp: isp
diecimila: TARGET = diecimila
diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1'
diecimila: AVR_FREQ = 16000000L
diecimila: $(PROGRAM)_diecimila.hex
diecimila_isp: diecimila
diecimila_isp: TARGET = diecimila
diecimila_isp: HFUSE = DD
diecimila_isp: LFUSE = FF
diecimila_isp: EFUSE = 00
diecimila_isp: isp
ng: TARGET = ng
ng: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3'
ng: AVR_FREQ = 16000000L
ng: $(PROGRAM)_ng.hex
ng_isp: ng
ng_isp: TARGET = ng
ng_isp: HFUSE = DD
ng_isp: LFUSE = FF
ng_isp: EFUSE = 00
ng_isp: isp
atmega328: TARGET = atmega328
atmega328: MCU_TARGET = atmega328p
atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600
atmega328: AVR_FREQ = 16000000L
atmega328: LDSECTION = --section-start=.text=0x7800
atmega328: $(PROGRAM)_atmega328.hex
atmega328_isp: atmega328
atmega328_isp: TARGET = atmega328
atmega328_isp: MCU_TARGET = atmega328p
atmega328_isp: HFUSE = DA
atmega328_isp: LFUSE = FF
atmega328_isp: EFUSE = 05
atmega328_isp: isp
atmega32: TARGET = atmega32
atmega32: MCU_TARGET = atmega32
atmega32: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1'
atmega32: AVR_FREQ = 8000000L
atmega32: LDSECTION = --section-start=.text=0x7800
atmega32: $(PROGRAM)_atmega32.hex
atmega32_isp: atmega32
atmega32_isp: TARGET = atmega32
atmega32_isp: MCU_TARGET = atmega32
atmega32_isp: HFUSE = DA
atmega32_isp: LFUSE = FF
atmega32_isp: isp
isp: $(TARGET)
$(ISPFUSES)
$(ISPFLASH)
isp-stk500: $(PROGRAM)_$(TARGET).hex
$(STK500-1)
$(STK500-2)
%.elf: $(OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
clean:
rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
%.lst: %.elf
$(OBJDUMP) -h -S $< > $@
%.hex: %.elf
$(OBJCOPY) -j .text -j .data -O ihex $< $@
%.srec: %.elf
$(OBJCOPY) -j .text -j .data -O srec $< $@
%.bin: %.elf
$(OBJCOPY) -j .text -j .data -O binary $< $@
|