aolserver4-daemon 4.5.1-18 / postinst

#! /bin/sh -e
# postinst script for aolserver4
#
# see: dh_installdeb(1)
# summary of how this script can be called:
#        * <postinst> `configure' <most-recently-configured-version>
#        * <old-postinst> `abort-upgrade' <new version>
#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
#          <new-version>
#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
#          <failed-install-package> <version> `removing'
#          <conflicting-package> <version>
# for details, see /usr/doc/packaging-manual/
#
# quoting from the policy:
#     Any necessary prompting should almost always be confined to the
#     post-installation script, and should be protected with a conditional
#     so that unnecessary prompting doesn't happen if a package's
#     installation fails and the `postinst' is called with `abort-upgrade',
#     `abort-remove' or `abort-deconfigure'.

PACKAGE="aolserver4"
ETCDIR="/etc/$PACKAGE"
RUNDIR="/var/run/$PACKAGE"
LOGDIR="/var/log/$PACKAGE"
NEW_SUFFIX="new"
OLD_SUFFIX="old"
CONF="$ETCDIR/$PACKAGE.tcl"
CONF_NEW="$CONF.$NEW_SUFFIX"
INIT="/etc/init.d/$PACKAGE"
INIT_NEW="$INIT.$NEW_SUFFIX"
DEFAULT="/etc/default/$PACKAGE"
DEFAULT_NEW="$DEFAULT.$NEW_SUFFIX"

[ -d $RUNDIR ] || mkdir -p -m 0755 $RUNDIR

replace_file () {
    file=$1
    if [ ! -f $file ] ; then
        mv $file.$NEW_SUFFIX $file
    else
	# ask before replacing
        cp $file $file.$OLD_SUFFIX
        ucf --debconf-ok $file.$NEW_SUFFIX $file
    fi
}

do_update () {
    file=$1
    if diff -q $file $file.$NEW_SUFFIX  >/dev/null 2>&1; then
        # Old file and new file are identical
        rm -f ${file}.$NEW_SUFFIX 
    else
        replace_file $file
    fi
}

if [ "$1" != "configure" ]
then
    exit 0
fi


# get debconf choices

. /usr/share/debconf/confmodule

db_get $PACKAGE/hostname
HOSTNAME=$RET

db_get $PACKAGE/address
ADDRESS=$RET

db_get $PACKAGE/port
PORT=$RET

# use current configuration or generate a new one from scratch

if [ ! -f $CONF ]; then

	cat <<EOF >$CONF_NEW
# 
#    AOLServer 4 configuration file.
#
#    Copyright (C) 2003-2009 Francesco P. Lovergine <frankie@debian.org>
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program; if not, write to the Free Software
#    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#
#    On Debian GNU/Linux systems a copy of the license is available
#    as /usr/share/common-licenses/GPL.
#

#
#    AOLServer can run multiple domains on a single machine. 
#
#    You can add more ns/server/domain sections and use the -s domain
#    command line option to use the same configuration file in multi-configuration
#    flavor. You could also use more configuration files and run multiple
#    instances of the daemon, alternatively.
#
#    This file use a single 'main' domain per default.
#

array set debian_config {
HOSTNAME $HOSTNAME
ADDRESS $ADDRESS
HTTP_PORT $PORT
HTTPS_PORT 443
}

proc parse_shell_snippet {filename} {
    global debian_config
    set fd [open \$filename r]
    set line_no 1
    while {![eof \$fd]} {
        set line [string trim [gets \$fd] " "]
        if {\$line == ""} continue
        switch -regexp -- \$line {
            ^#.* { }
            .*=.* {
                set pair [split \$line =]
                set name [string trim [lindex \$pair 0] " "]
                set value [string trim [lindex \$pair 1] " "]
                set debian_config(\$name) \$value
            }
           default {
                error "Error parsing \$filename (line: \$line_no): \$line"
           }
        }
        incr line_no
    }
    close \$fd
}

#
# Parse default vars snippet file
#
parse_shell_snippet /etc/default/aolserver4

#############################################################################################
#
#    GLOBAL VARIABLES
#

set httpport    \$debian_config(HTTP_PORT)
set httpsport   \$debian_config(HTTPS_PORT)
set controlport 9999

set hostname \$debian_config(HOSTNAME)
set address  \$debian_config(ADDRESS)

set servername main
set serverdesc "AOLServer Site"
set package    $PACKAGE

set pageroot      /var/www
set directoryfile index.adp,index.html,index.htm

set homedir /usr/lib/\${package}
set bindir  \${homedir}/bin

set sslmodule    nsssl.so
set sslkeyfile   \${homedir}/servers/\${servername}/modules/nsssl/keyfile.pem
set sslcertfile  \${homedir}/servers/\${servername}/modules/nsssl/certfile.pem

set serverlog       /var/log/\${package}/\${package}.log
set pidfile         /var/run/\${package}/\${package}.pid

##############################################################################################
#
#    GLOBAL SERVER PARAMETERS
#
#
ns_section "ns/parameters"

ns_param home \${homedir}
ns_param debug false
ns_param servername \${servername}

ns_param user  www-data
ns_param group www-data

# Data structures
ns_param   dstringcachemaxentries 10        ;# Max no. of Dstrings to put on cache
ns_param   dstringcachemaxsize    [expr 3*1024]
ns_param   iobufsize              16000     ;# Buffer size suitable for I/O

# Limits
ns_param   keepalivetimeout 30       ;# Max time conn is kept alive (keepalive)
                                     ;#   (set to 0 to disable keepalive)
ns_param   listenbacklog   32        ;# Max length of pending conn queue
ns_param   maxkeepalive    100       ;# Max no. of conns in keepalive state
ns_param   schedmaxelapsed 2         ;# Warn when waiting on really long procs
ns_param   shutdowntimeout 20        ;# Secs to wait on shutdown if open conns

# Server logging
ns_param dev             true      ;# Display logging with "Dev" severity
ns_param debug           false     ;# Display logging with "Debug" severity
ns_param logexpanded     false     ;# true = double-spaced server.log
ns_param logroll         false     ;# Roll server.log every 24 hours.
ns_param maxbackup       10        ;# Max number of old server.log files

ns_param serverlog       \${serverlog}	;# Logging file name
ns_param pidfile         \${pidfile}	;# pid of server file name

# DNS tuning
ns_param   dnscache        true      ;# In-memory cache of DNS lookups
ns_param   dnscachetimeout 60        ;# How long to keep hostnames in cache

# Miscellaneous
ns_param   checkexitcode   false     ;# Check exit code on forked process
ns_param   crashcmd        ns_crash  ;# A Tcl command that dumps core.
ns_param   mailhost        localhost ;# SMTP host for ns_sendmail





##############################################################################################
#
#    MODULE CONFIGURATIONS
#
#

#
# Thread library (nsthread) parameters
#
ns_section "ns/threads"
ns_param   mutexmeter      true      ;# measure lock contention
ns_param   stacksize       [expr 128*1024]  ;# stack size per thread (in bytes)

#
# MIME types.
#
# Note: AOLserver already has an exhaustive list of MIME types, but in
# case something is missing you can add it here.
#
ns_section "ns/mimetypes"
ns_param   default         "*/*"     ;# MIME type for unknown extension
ns_param   noextension     "*/*"     ;# MIME type for missing extension
#ns_param   ".xls"          "application/vnd.ms-excel"

#
#   I18N Mime-types; define content-type header values
#                    to be mapped from these file-types.
#                    Note that you can map file-types of adp files to control
#                    the output encoding through mime-type specificaion.
#                    Remember to add an adp mapping for that extension.
#
ns_param   .adp            "text/html; charset=iso-8859-1"
ns_param   .u_adp          "text/html; charset=UTF-8"
ns_param   .gb_adp         "text/html; charset=GB2312"
ns_param   .sjis_html      "text/html; charset=shift_jis"
ns_param   .sjis_adp       "text/html; charset=shift_jis"
ns_param   .gb_html        "text/html; charset=GB2312"

#
#   I18N File-type to Encoding mappings
#
ns_section "ns/encodings"
ns_param   .utf_html       "utf-8"
ns_param   .sjis_html      "shiftjis"
ns_param   .gb_html        "gb2312"
ns_param   .big5_html      "big5"
ns_param   .euc-cn_html    "euc-cn"

#
# Note: you will need to include file-type to encoding mappings
#       for ANY source files that are to be used, to allow the
#       server to handle them properly.  E.g., the following
#       asserts that the GB-producing .adp files are themselves
#       encoded in GB2312 (this is not simply assumed).
#
ns_param   .gb_adp         "gb2312"

#
# Thread library (nsthread) parameters
#
ns_section "ns/threads"
ns_param mutexmeter      true           ;# measure lock contention
ns_param stacksize       [expr 128*1024]  ;# stack size per thread (in bytes)
                                                                                                                           

##########################################################################################
#
#  SERVER LEVEL CONFIGURATION
#
#  There is only one server in AOLserver, but this is helpful when multiple
#  servers share the same configuration file.  This file assumes that only
#  one server is in use so it is set at the top.
#

ns_section "ns/servers"
ns_param   \$servername         \$serverdesc ;# Name of virtual server.

#
# Server parameters
#
ns_section "ns/server/\${servername}"
ns_param   directoryfile   \$directoryfile ;# List of files to use (index.html)
ns_param   pageroot        \$pageroot ;# Directory under which all pages live

# Tuning options
ns_param   connsperthread  0         ;# Normally there's one conn per thread
ns_param   flushcontent    false     ;# Flush all data before returning
ns_param   maxconnections  100       ;# Max connections to put on queue
ns_param   maxdropped      0         ;# Shut down if dropping too many conns
ns_param   maxthreads      20        ;# Tune this to scale your server
ns_param   minthreads      0         ;# Tune this to scale your server
ns_param   threadtimeout   120       ;# Idle threads die at this rate

# Limits
ns_param   maxheaders      16384     ;# Max no. of headers from client
ns_param   maxline         8192      ;# Max line length from client
ns_param   maxpost         65536     ;# Max bytes on a POST
ns_param   sendfdthreshold 2048      ;# Min size of file descriptor to send

# Performance statistics gathering
ns_param   globalstats     true      ;# Enable built-in statistics
ns_param   urlstats        true      ;# Enable URL statistics
ns_param   maxurlstats     1000      ;# Max number of URL's to do stats on

# Directory listings can be generated with an ADP or a Tcl proc.
ns_param   directoryadp    \$homedir/dirlist.adp  ;# Choose one or the other
ns_param   directoryproc   _ns_dirlist        ;#  ...but not both!
ns_param   directorylisting simple   ;# Can be simple or fancy (for ns_dirlist)

# Miscellaneous
ns_param   checkmodifiedsince true   ;# Check url if no If-Modified-Since?
ns_param   enableaolpress  false     ;# Enable extra features used by AOLpress
ns_param   headercase      preserve  ;# tolower, toupper, preserve

#
# Internal redirects
#
#ns_section "ns/server/\${servername}/redirects"
#ns_param   404 "/notfound.html"      ;# Not Found error page
#ns_param   500 "/servererror.html"   ;# Server Error page

#
# Fastpath serves HTML
#
#     Fast path configuration is used to configure options used for serving
#     static content, and also provides options to automatically display
#     directory listings.
#
# Parameters:
#
#     cache               Boolean. Enable cache for normal URLs.
#                         Optional, default is false.
#     cachemaxsize        Integer. Size of fast path cache.
#                         Optional, default is 5120000.
#     cachemaxentry       Integer. Largest file size allowed in cache.
#                         Optional, default is cachemaxsize / 10.
#     mmap                Boolean. Use mmap() for cache.
#                         Optional, default is false.
#     directoryfile       String. Directory index/default page to
#                         look for. Optional, default is directoryfile
#                         parameter set in ns/server/\${servername} section.
#     directorylisting    String. Directory listing style. Optional,
#                         Can be "fancy" or "simple".
#     directoryproc       String. Name of Tcl proc to use to display
#                         directory listings. Optional, default is to use
#                         _ns_dirlist. You can either specify directoryproc,
#                         or directoryadp - not both.
#     directoryadp        String. Name of ADP page to use to display
#                         directory listings. Optional. You can either
#                         specify directoryadp or directoryproc - not both.
#
#
#    ns_section "ns/server/\${servername}/fastpath"
#        ns_param directorylisting fancy
#

ns_section "ns/server/\${servername}/fastpath"
ns_param   cache           true      ;# Enable cache for normal URLs
ns_param   cachemaxentry   8192      ;# Largest file size allowable in cache
ns_param   cachemaxsize    [expr 5000*1024] ;# Size of fastpath cache
ns_param   mmap            false     ;# Use mmap() for cache

#
# Tcl interpreter
#
ns_section "ns/server/\${servername}/tcl"
ns_param   autoclose       true      ;# Close files the Tcl interp opened
ns_param   debug           false     ;# Names of files sourced is logged
ns_param   nsvbuckets      8         ;# No. of buckets to hold nsv's
ns_param   statlevel       0         ;# How many levels deep to run tclstats
ns_param   statmaxbuf      100       ;# Maximum entries in tclstats table
ns_param   library \
	\$homedir/servers/\${servername}/modules/tcl ;# Private tcl library for the server

#
# ADP (AOLserver Dynamic Page) configuration
#
ns_section "ns/server/\${servername}/adp"

# ADP features
ns_param   map             "/*.adp"  ;# Extensions to parse as ADP's
ns_param   map             "/*.html" ;# Any extension can be mapped
ns_param   enableexpire    true      ;# Set "Expires: now" on all ADP's
ns_param   enabledebug     true      ;# Turn on Tclpro debugging with "?debug"
ns_param   debuginit "ns_adp_debuginit" ;# Debug procedure

# ADP tuning
ns_param   cache           true      ;# In-memory cache of ADP's
ns_param   cachesize       [expr 5000*1024]
ns_param   taglocks        false     ;# Enable post-ini creation of ADP tags
ns_param   threadcache     false     ;# default for Tcl 7.6 (nsd76)
ns_param   threadcache     true      ;# default for Tcl 8.2 (nsd82)

# ADP special pages
#ns_param   errorpage \
#	\${pageroot}/errorpage.adp        ;# Pretty-print ADP errors with an ADP
#ns_param   startpage \
#	\${pageroot}/startpage.inc        ;# Page to include for all ADP's


#
# ADP custom parsers -- see adp.c
#
ns_section "ns/server/\${servername}/adp/parsers"
ns_param   adp             ".adp"   ;# The simple parser looks for <\% ... \%>
ns_param   fancy           ".adp"   ;# The fancy parser does a lot more.


#
# Socket driver module (HTTP)  -- nssock
#
ns_section "ns/server/\${servername}/module/nssock"
ns_param   port            \$httpport ;# Port for HTTP (typically 80)
ns_param   hostname        \$hostname ;# This is not the same as your hostname
ns_param   address         \$address  ;# This is not the same as your host addr
ns_param   location        "http://\$hostname/"     ;# URL for auto-redirects (trailing slash)

#
# Socket driver module (HTTPS) -- nsssl
#
ns_section "ns/server/\${servername}/module/nsssl"
ns_param   port            \$httpsport
ns_param   hostname        \$hostname     
ns_param   address         \$address  
ns_param   keyfile         \$sslkeyfile
ns_param   certfile        \$sslcertfile


#
# Control port -- nscp
#
# To enable:
#
# 1. Define an address and port to listen on. For security
#    reasons listening on any port other then 127.0.0.1 is
#    not recommended.
#
# 2. Decided whether or not you wish to enable features such
#    as password echoing at login time, and command logging.
#
# 3. Add a list of authorized users and passwords. The entires
#    take the following format:
#
#    <user>:<encryptedPassword>:
#
#    You can use the ns_crypt Tcl command to generate an encrypted
#    password. The ns_crypt command uses the same algorithm as the
#    Unix crypt(3) command. You could also use passwords from the
#    /etc/passwd file.
#
#    The first two characters of the password are the salt - they can be
#    anything since the salt is used to simply introduce disorder into
#    the encoding algorithm.
#
#    ns_crypt <key> <salt>
#    ns_crypt x t2
#
#    The configuration example below adds the user "nsadmin" with a
#    password of "x".
#
# 4. Make sure the nscp.so module is loaded in the modules section.
#
ns_section "ns/server/\${servername}/module/nscp"
ns_param   port            \$controlport      ;# Control port listens on port 9999
ns_param   address         127.0.0.1         ;# For security, use 127.0.0.1 only
ns_param   echopassword 1
ns_param   cpcmdlogging 1
ns_param   reconnection off

# Control port users
ns_section "ns/server/\${servername}/module/nscp/users"
# The default password for nsadmin is "x". You should change it.
# type "ns_crypt newpassword salt" and put the encrypted string below.
ns_param user "nsadmin:t2GqvvaiIUbF2:" ;# sample user="nsadmin", pw="x".

#
# Access log -- nslog
#
ns_section "ns/server/\${servername}/module/nslog"
ns_param   file            \${serverlog}
ns_param   formattedtime   true      ;# true=common log format
ns_param   logcombined     false     ;# true==NCSA combined format
ns_param   maxbackup       5         ;# Max number to keep around when rolling
ns_param   rollhour        0         ;# Time to roll log
ns_param   rolllog         true      ;# Should we roll log?
ns_param   rollonsignal    true      ;# Roll log on SIGHUP

#
# CGI interface -- nscgi
#
# Note: CGI is *vastly* inferior to ADP's or even built-in Tcl libraries.
#
ns_section "ns/server/\${servername}/module/nscgi"
ns_param   debug           false     ;# Be chatty in log
ns_param   gethostbyaddr   false     ;# Whether to do reverse DNS lookups
ns_param   limit           0         ;# Max number of concurrent CGI processes
ns_param   maxoutput       10240     ;# Max bytes allowed from external process
ns_param   buffersize      8192      ;# Buffer output from external process
#ns_param   map \
#    "GET /cgi-lib /usr/lib/cgi-bin"        ;# Where system CGI executables live (GET)
#ns_param   map \
#    "POST /cgi-lib /usr/lib/cgi-bin"       ;# Where system CGI executables live (POST)
#ns_param   map \
#    "GET /cgi-bin /usr/local/cgi-bin"      ;# Where your CGI executables live (GET)
#ns_param   map \
#    "POST /cgi-bin /usr/local/cgi-bin"     ;# Where your CGI executables live (POST)
ns_param   map \
    "GET /cgi-bin /usr/lib/cgi-bin"      ;# Where your CGI executables live (GET)
ns_param   map \
    "POST /cgi-bin /usr/lib/cgi-bin"     ;# Where your CGI executables live (POST)

ns_param map            "GET /*.py"
#ns_param map           "GET /doc /usr/share/doc"
ns_param map            "POST /*.pl"
ns_param map            "POST /*.py"
ns_param interps         cgiinterps
                                                                                                                
#ns_section "ns/interps/CGIinterps"
#ns_param .pl          "/usr/bin/perl"
#ns_param .sh          "/bin/sh"
#ns_param .py          "/usr/bin/python"
                                                                                                                

# CGI environment variable handling -- See admin guide
ns_param   systemenvironment false   ;# Copies environment from nsd start shell


#
# Access control (permissions) -- nsperm
#
ns_section "ns/server/\${servername}/module/nsperm"

#
# Unix domain socket driver -- nsunix
#
ns_section "ns/server/\${servername}/module/nsunix"
ns_param   hostname        \$hostname    ;# Hostname used in response to client
ns_param   port            \$httpport           ;# Port to listen on
ns_param   socketfile      /var/run/\${package}/\${servername}.sock ;# UNIX domain socket driver

#
# Virtual Hosting redirector -- nsvhr
#
ns_section "ns/server/\${servername}/module/nsvhr"
ns_param   busyurl         "url"     ;# Redirect here if back-end times out
ns_param   errorurl        "url"     ;# Redirect here on proxy errors
ns_param   method          "GET"     ;# Methods allowed to proxy
ns_param   method          "POST"    ;# Methods allowed to proxy (can have >1)
ns_param   timeout         30        ;# Timeout waiting for back-end

# Register hosts to proxy
#ns_section "ns/server/\${servername}/module/nsvhr/maps"
#ns_param   "www.tcpsocket.com"    "http://127.0.0.0:2000" ;# HTTP proxy
#ns_param   "www.domainsocket.com" "unix://somehost"       ;# Domain socket

#
# Database drivers
#
# Two pools are given here.  Sybase uses the Sybase client libraries,
# obtained from Sybase.  Postgres is freely available at
# www.postgresql.org.  Sybase uses an external proxy daemon while
# Postgres uses an internal driver.  The Sybase driver requires some
# configuration in ns/db/driver/sybase_driver to tell th "nsext.so"
# driver where to find the nssybpd executable and some other things.
# The Postgres driver doesn't need any of that because it's internal
# and does not use nsext.so.
#
#ns_section "ns/db/drivers"
#ns_param   sybase_driver   nsext.so       ;# Use nsext.so for a proxy daemon
#ns_param   postgres_driver nspostgres.so  ;# An internal driver
#
#ns_section "ns/db/driver/sybase_driver"
#ns_param   localdaemon     nssybpd        ;# Name of the proxy daemon executable
#ns_param   param           path_to_sybase ;# Usually the \$SYBASE env var
#
#ns_section "ns/db/pools"
#ns_param   sybase_pool    "Sybase Pool"
#ns_param   postgres_pool  "Postgres Pool"
#
#ns_section "ns/db/pool/sybase_pool"
#ns_param   driver          sybase_driver
#ns_param   datasource      SERVER_NAME:database_name
#ns_param   user            user_name
#ns_param   password        password
#ns_param   connections     1
#ns_param   logsqlerrors    true      ;# Verbose SQL query error logging
#ns_param   verbose         false     ;# Verbose error logging
#ns_param   maxidle         600       ;# Max time to keep idle db conn open
#ns_param   maxopen         3600      ;# Max time to keep active db conn open
#
#ns_section "ns/db/pool/postgres_pool"
#ns_param   driver          postgres_driver
#ns_param   datasource      HOSTNAME:PORT:database_name
#ns_param   user            user_name
#ns_param   password        password
#ns_param   connections     1
#ns_param   logsqlerrors    true      ;# Verbose SQL query error logging
#ns_param   verbose         false     ;# Verbose error logging
#ns_param   maxidle         600       ;# Max time to keep idle db conn open
#ns_param   maxopen         3600      ;# Max time to keep active db conn open
#
# Accessing DB pools
#
# In the case of virtual servers you can give different virtual
# servers access to different databases, or you can let them access
# them all.  AOLserver 3.x does not use virtual servers so the only
# useful value is "*", but if you use one config file for multiple nsd
# processes, or you are using a version of AOLserver that supports
# virtual servers, then you should list the pools you want to access.
#
#ns_section "ns/server/\${servername}/db"
#ns_param pools          *            ;# Wildcard gives access to all
#ns_param defaultpool    sybase_pool
#

#
# Modules to load
#
# Note: Only load the modules you are actually going to use.
# Add here optional modules when needed.
#
ns_section "ns/server/\${servername}/modules"
ns_param   nssock             nssock.so
ns_param   nslog              nslog.so
ns_param   nscgi              nscgi.so
ns_param   nsperm             nsperm.so
#ns_param   nscp               nscp.so
#if { [file exists \$sslcertfile] && [file exists \$sslkeyfile] } {
#ns_param   nsssl 	       nsssl.so
#}
                                                                                                                
#
# Loading a Tcl module
#
# This example shows a Tcl module, called "tcl_module", has its code
# in the AOLserver Tcl library in either the modules/tcl/tcl_module
# directory or servers/servername/modules/tcl/tcl_module directory.
#
ns_param   tcl_module          tcl

                                                                                                                
#
# Example: Multiple connection thread pools.
#
# To enable:
#
# 1. Define one or more thread pools.
# 2. Configure pools as with the default server pool.
# 3. Map method/URL combinations to the pools
#
# All unmapped method/URL's will go to the default server pool.
#
#ns_section ns/server/main/pools
#ns_section slow "Slow requests here."
#ns_section fast "Fast requests here."
#
#ns_section ns/server/main/pool/slow
#ns_param map {POST /slowupload.adp}
#ns_param maxconnections  100       ;# Max connections to put on queue
#ns_param maxdropped      0         ;# Shut down if dropping too many conns
#ns_param maxthreads      20        ;# Tune this to scale your server
#ns_param minthreads      0         ;# Tune this to scale your server
#ns_param threadtimeout   120       ;# Idle threads die at this rate
#
#ns_section ns/server/main/pool/fast
#ns_param map {GET /faststuff.adp}
#ns_param maxthreads 10
#

#
# Example:  Web based stats interface.
#
# To enable:
#
# 1. Configure whether or not stats are enabled. (Optional: default = false)
# 2. Configure URL for statistics. (Optional: default = /_stats)
#
#    http://<host>:<port>/_stats
#
# 3. Configure user. (Optional: default = aolserver)
# 4. Configure password. (Optional: default = stats)
#
# For added security it is recommended that configure your own
# URL, user, and password instead of using the default values.
#
#ns_section ns/server/stats
#    ns_param enabled 1
#    ns_param url /aolserver/stats
#    ns_param user nsadmin
#    ns_param password 23dfs!d
#

EOF

else
	cp $CONF $CONF_NEW
	sed -i \
	    -e "s/^HOSTNAME[ \t]\+\(.*\)\$/HOSTNAME $HOSTNAME/" \
	    -e "s/^ADDRESS[ \t]\+\(.*\)\$/ADDRESS $ADDRESS/" \
	    -e "s/^HTTP_PORT[ \t]\+\(.*\)\$/HTTP_PORT $PORT/" \
	    $CONF_NEW 
fi

do_update $CONF

chown root:root $CONF
chmod 644 $CONF

# create a new init script if it not exists, or update the existing one

cat <<EOF >$INIT_NEW
#!/bin/sh
#
# Start the AOLServer HTTP server.
#
# Copyright (C) 2003-2009 Francesco P. Lovergine <frankie@debian.org>
#

### BEGIN INIT INFO
# Provides:          aolserver4
# Required-Start:    \$local_fs \$remote_fs \$network \$syslog
# Required-Stop:     \$local_fs \$remote_fs \$network \$syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Should-Start:      \$postgresql                                                                                             
# Should-Stop:       \$postgresql                                                                                             
# Short-Description: Starts AOLserver web daemon
# Description:       It starts up the AOLserver http multi-threaded 
#                    server
### END INIT INFO

NAME=$PACKAGE
USER=www-data
GROUP=www-data
ADDRESS=$ADDRESS
HTTP_PORT=$PORT
DAEMON=/usr/sbin/$PACKAGE-nsd
PIDFILE=$RUNDIR/\$NAME.pid
CONF=$CONF
RUN_DAEMON=yes

trap "" 1

[ -x \$DAEMON ] || exit 0

. /lib/lsb/init-functions

if [ -f $DEFAULT ]; then
	. $DEFAULT
fi

# /var/run could be on a tmpfs

[ ! -d \$RUNDIR ] && mkdir -p -m 755 \$RUNDIR

start()
{
	if [ "\$RUN_DAEMON" = "yes" ]; then
    	log_daemon_msg "Starting web server" "\$NAME"
		start-stop-daemon --start --quiet --exec \$DAEMON --pidfile \$PIDFILE --oknodo -- \\
			-u \$USER -g \$GROUP -b \$ADDRESS:\$HTTP_PORT -s main -t \$CONF >/dev/null 
		if [ \$? != 0 ]; then
			log_end_msg 1
		exit 1
		else
			log_end_msg 0
		fi
	fi

	for name in $ETCDIR/conf.d/*.sh; do
		base=\$(basename \$name .sh)
		if [ -e $ETCDIR/conf.d/\$base.tcl ]; then
			AOL_PIDFILE=$RUNDIR/\$base.pid
			AOL_ADDRESS=\$ADDRESS 
			AOL_PORT=\$(expr \$HTTP_PORT + 1)
			AOL_USER=\$USER
			AOL_GROUP=\$GROUP
			RUN_DAEMON=yes
			. \$name
			if [ "\$RUN_DAEMON" = "yes" ]; then
				log_daemon_msg "Starting AOL instance" "\$base"
				start-stop-daemon --start --quiet --exec \$DAEMON --pidfile \$AOL_PIDFILE --oknodo -- \\
					-u \$AOL_USER -g \$AOL_GROUP -b \$AOL_ADDRESS:\$AOL_PORT -s \$base -t $ETCDIR/conf.d/\$base.tcl >/dev/null 
				if [ \$? != 0 ]; then
					log_end_msg 1
				exit 1
				else
					log_end_msg 0
				fi
			fi
		fi
	done
}

stop()
{
	for name in $RUNDIR/*.pid; do
		if [ -f \$name ]; then
			base=\$(basename \$name .pid)
			log_daemon_msg "Stopping web server" "\$base"
			start-stop-daemon --stop --quiet --pidfile \$name --oknodo >/dev/null 
			if [ \$? != 0 ]; then
				log_end_msg 1
			exit 2
			else
				log_end_msg 0
			fi
		fi
	done
}


case "\$1" in
  start)
    start
    ;;

  stop)
    stop
    ;;

  reload|force-reload|restart)
    stop
    sleep 2
    start
    ;;

  *)
    echo "Usage: /etc/init.d/\$NAME {start|stop|restart|reload|force-reload}"
    exit 1
    ;;
esac

exit 0

EOF

chown root:root $INIT_NEW
chmod 755 $INIT_NEW

if [ -f $INIT ]; then
	do_update $INIT
else 
	replace_file $INIT
fi

# create a default file 

cat <<EOF >$DEFAULT_NEW
#
# These variables can be customized to change main AOLserver settings.
# More changes can be done by modifying the $CONF Tcl script.
# 
# Note that these variables are read and interpreted by the Tcl script
# too, so avoid using shell capabilities in setting vars.
#

#USER=www-data
#GROUP=www-data
#HOSTNAME=$HOSTNAME
#ADDRESS=$ADDRESS
#HTTP_PORT=$PORT
#HTTPS_PORT=443
#CONF=$CONF
#RUN_DAEMON=yes
EOF

chown root:root $DEFAULT_NEW
chmod 644 $DEFAULT_NEW

if [ -f $DEFAULT ]; then
	do_update $DEFAULT
else 
	replace_file $DEFAULT
fi

# Important: keep db_stop before any ucf call or use --debconf-ok

db_stop

# remove any possible residual ldso file from previous installations

rm /etc/ld.so.conf.d/aolserver4.conf >/dev/null 2>&1 && ldconfig || true

if [ -x $INIT ]; then
        update-rc.d $PACKAGE defaults 91 >/dev/null
        if [ -x /usr/sbin/invoke-rc.d ]; then
                invoke-rc.d $PACKAGE start
        else
                $INIT start
        fi
fi

# create the pageroot dir if it does not exist and a default home page

if [ ! -d /var/www ]; then
        mkdir -p /var/www
        chown root:root /var/www
        chmod 755 /var/www
fi

if [ ! -f /var/www/index.adp ]; then
		if [ -e /usr/share/doc/$PACKAGE/examples/index.adp.gz ]; then
        	zcat /usr/share/doc/$PACKAGE/examples/index.adp.gz >/var/www/index.adp
		fi
		if [ -e /usr/share/doc/$PACKAGE/examples/index.adp ]; then
        	cp /usr/share/doc/$PACKAGE/examples/index.adp /var/www/index.adp
		fi
        chmod 644 /var/www/index.adp || true
fi

# assign ownership of run and log directories to www-data

if [ -d $RUNDIR ]; then
	chown www-data:www-data $RUNDIR
	chmod 755 $RUNDIR
fi

if [ -d $LOGDIR ]; then
	chown www-data:www-data $LOGDIR
	chmod 755 $LOGDIR
fi

# remove tmp files still around if any...

rm -f "$CONF.$NEW_SUFFIX" "$CONF.$OLD_SUFFIX" "$INIT.$NEW_SUFFIX" "$INIT.$OLD_SUFFIX"