vile-common 9.8q-1build1 / usr / share / vile / vile.hlp

Getting along with vile                                            version 9.8
-----------------------                                            -----------

                            Getting along with vile

   Use Ctrl-D and Ctrl-U to scroll through this help information.

   Type Ctrl-O to make this the only window on the screen. Type Ctrl-K to get
   rid of this window.

   First, to leave vile, use any of the following:

   :q
   :quit
   :exit
   :wq
           (writes current buffer before quitting)

   :q!
           (quits without writing any changes!)

   Q

   :wwq or ZZ
           (will write all changed buffers)

   ^X-^C
           (don't know why. They don't put in ":q" for us! Actually, if ^C is
           your interrupt character, this won't get you out of vile.)

   To get help (probably just this text), use any of:

     :h
     :help
     ^X-h
     ^A-h

   The only vile commands described herein are those not present in vi, or
   differing greatly from those in vi. There is a section at the bottom
   describing other differences between vile and vi.

   To get a complete list of all commands, type ":show-commands". To get a
   list of all commands that contain the string "name", type ":apropos name".
   These lists will show all command synonyms and key sequences that are
   bound to the same function, along with a short description of the command,
   and whether it is a motion or operator command.

   For a list of motions, type ":describe-motions". Likewise, you can see a
   list of operators by typing ":describe-operators".

   To get information on a specific key-binding or function, use the
   "describe-key" or "describe-function" commands. You will be asked for a
   keystroke or function name, and a short description will be shown.

   You needn't type full command names -- type a few characters and hit TAB
   to perform command completion. Hitting a second TAB will pop up a window
   containing the list of possible completions.

   If your screen hops around a lot when you scroll, see the "Note on
   Scrolling" section near the bottom of this file.


General Remarks
---------------
   vile holds text in "buffers". Usually, these correspond to a file that you
   are editing, but not always. For instance, a buffer might be used to
   display this help text, or to hold the output of a shell command that you
   have run. Buffers have names, and these usually match the names of the
   files they contain.

   Buffers are sometimes displayed in windows. A buffer may be displayed in
   more than one window at the same time. There is no such thing as a hidden
   window. All existing windows are on the screen. There may, however, be
   hidden buffers, which are not currently associated with any window.

   All yank/delete registers (the default unnamed register, the numbered
   registers ("1-9") that hold line-deletes, and the named registers ("a-z"))
   are global to the editor, and not attached to any single buffer. Thus you
   can delete text in one buffer and put it back in another.

   Undo operations are attached to a buffer, not a window. Thus if you have
   two windows to the same buffer, and make a change in one, you can undo it
   in the other.

   vile supports many, many "modes" (aka options), which are thoroughly
   explained in the section entitled "Editor modes". But do note that this
   help file makes references to modes before the concept is fully described.
   It's a chicken and egg problem....

   vile is 8-bit clean, allowing it to be used more easily at non- English
   speaking sites. See the section on "8-Bit Operation" for more information.


Command Prefixes
----------------
   To extend the vi command set in vile, two (or three, depending on how you
   count them) command "prefixes" exist. These keystrokes, in combination
   with another key, can be bound as a pair to execute any vile function. The
   default values for these prefixes are

   +------------------------------------------------------------------------+
   | Key:                             | Bound to dummy function:            |
   |----------------------------------+-------------------------------------|
   | ^X Control-X                     | cntl_x-prefix                       |
   |----------------------------------+-------------------------------------|
   | ^A Control-A                     | cntl_a-prefix                       |
   |----------------------------------+-------------------------------------|
   | # poundsign                      | function-prefix                     |
   +------------------------------------------------------------------------+

   If you find any of these keys hard to type, or would prefer that they are
   all control characters (or all non-control), they can be changed by
   binding a new key to the function listed above. See the section on "Key
   Rebinding" below. If you do change the values of these keys, most of
   vile's informational displays (the Binding List, for instance) will
   reflect these changes. This documentation, of course, will not change.

   (The '#' key is used in vi to give terminal independent access to function
   key bindings. This is also true in vile -- if something is bound to '#2',
   then it is also probably available with key F2 on your keyboard.)


Buffer manipulation commands
----------------------------
   vile stores buffers in a sorted list. Depending on the setting of the
   "autobuffer" mode, this list is either sorted in "most-recently-used"
   order (this is the vile default), or in a fixed order dependent on the
   order of editing (this is how vi normally does it, and can be attained by
   turning "autobuffer" off, with "set noautobuffer").

   _
           Show a list of the first 9 buffers. Follow this command with a
           digit to select that buffer, or simply repeat it ("__") to select
           the buffer most-recently visited. In autobuffer mode, this is
           identical to "_1". If autobuffer mode is off, the buffer which
           will be visited with "__" is flagged with a '#' character in the
           list. Modified buffers are preceded by a '*' in the history list.
           There are many different ways to get the previous file:

                __

                _1
                        (autobuffer mode on)

                1_
                        (autobuffer mode on)

                :e#

                ^^ (ctrl-^)
                        (but many keyboards can't produce this)

           The buffer number may also precede the '_' command. This is
           necessary when visiting buffers numbered higher than '9'. For
           example, one would type "13_" to visit buffer 13 in the list.

           Use tab (or back-tab if supported) to scroll the list of 9 buffers
           right/left. Pressing '_' will select the first listed buffer; the
           1-9 digits also work as expected when the list is scrolled.

           [ See the note under "Differences", below, for comments on vi's
           use of '_'.]

   :e
           Edit a file. If the file is already in a buffer, that buffer will
           be recalled into the current window. This occurs as follows: If
           the name given contains no path delimiters (i.e. slashes), then it
           will be compared to the existing vile buffer names. Failing that
           comparison (or if there are any slashes in the name), the name
           will be stretched into an absolute path, and will be compared to
           the existing buffers' filenames. In either case, the matching
           buffer will be chosen. If there are no such matches, the file will
           be fetched from the filesystem. This matching technique introduces
           an ambiguity, since buffer names are created from the last path
           component of filenames. To force vile to edit a file from the
           current directory whose basename matches that of one that was
           edited elsewhere, simply preface the name with "./". For example,
           if you edit "../Makefile" and later attempt to edit "Makefile",
           vile will assume you are referring to the _buffer_ named
           "Makefile". To get the file in the current directory, specify
           "./Makefile".

   :e!
           Re-edit a file. A different filename can be given, and the buffer
           name will change to match it. This command is not as necessary in
           vile as it is in vi, since multiple buffers may have outstanding
           unwritten changes.

   ^X-_
           Identical to '_', except that the selected buffer is placed in the
           current window (windows are described in the next help topic).
           This is most useful when:
              * two windows show a different view of the same buffer (for
                illustration's sake, call the views "A" and "B").
              * :e is used to open a new buffer (call this view "C"), which
                obscures "A".
              * eventually, you decide to return to "A" and "B".

           ^X-_1 does the trick (reverts to views "A" and "B"), but _1 simply
           moves the cursor into B's window, retaining views "C" and "B".

   :n
           Go to the next buffer. "Next" means "least recently used" in
           autobuffer mode. In noautobuffer mode, "next" means next in
           numeric sequence. (The ":n file ..." version of the command is not
           supported.)

   :rename-buffer
           Rename the current buffer. Prompts for a new name. Does not affect
           the filename associated with the buffer. Use ":f" to do that. This
           command is useful for renaming the "[Output]" buffer, if you wish
           to preserve its contents, but run a new command.

   :set-window
           Set the current window to the specified buffer. This is useful
           especially when you have split the screen into a number of windows
           and want to override the automatic layout of "#" and "%" buffers.

   :rewind
           Go to the first buffer. This is used only in 'noautobuffer'
           (vi-style buffering) mode. It does nothing in "autobuffer" mode.
           Remember that "autobuffer" mode is the default.

   :unmark-buffer
           Clears the "modified" status of a buffer. Useful for the creation
           of temporary buffer(s) that are discarded when the editor exits.

   :b
           Edit a buffer. Recalls the named buffer. Does not look for a file
           of that name. Will find "invisible" buffers.

   :ki
           Kill a buffer. Remove the buffer and its contents from the editor.
           Will ask if changes to the buffer should be discarded. Multiple
           buffer names may be specified via wildcards (e.g., :ki *.log) and
           individual buffer names may be selected via name completion (using
           the same conventions as in filename completion, described below).

   ^X-e
           Edit the file whose pathname appears under the cursor. For
           example, if you are editing a makefile, you could edit one of the
           source files by placing the cursor at the start of its name and
           using this command. Note that this does not know about some
           characters that your shell might usually translate for you, like
           the '$' in '$HOME'.

   ^X-k
           Kill the buffer whose name or filename appears under the cursor.

   *
           Display a list of all buffers, or make that display go away if
           it's already present. Leave your finger on the key, and it's easy
           to create and destroy the list. The buffers are numbered; the
           numbers correspond to the history numbers shown and used by the
           '_' command, described above. (If the buffer number is greater
           than 9, then the "nn_" form of the '_' command must be used, since
           '_' will only accept a single following digit.) The order of the
           list is either most-recently-used, or fixed, depending on the
           setting of "autobuffer" mode (see below). vile attempts to keep
           the contents of the buffer list window up to date if it is left up
           on the screen while other buffer manipulation commands are given.

   ^A-*
           Always display a list of all buffers. Useful for updating the list
           if it's already on the screen but may be out of date. Any argument
           will cause the list to include _all_ buffers, even those normally
           considered "invisible". (For example, macros are stored in
           "invisible" buffers.) [This command isn't as necessary now that
           the buffer list is maintained dynamically...]


Window manipulation commands
----------------------------
   ^X-2
           Make Two windows. Splits the current window in half. This is the
           usual way to create a new window.

   ^K or ^X-0
           Get rid of (Kill) this window.

   ^O or ^X-1
           Make this the Only window on the screen.

   ^X-o
           Move to the next window.

   ^X-O
           Move to the previous window.

   v
           Make the current window smaller.

   V
           Make the current window larger.

   ^A-^D
           Scroll the next window down half a screen.

   ^A-^U
           Scroll the next window up half a screen.

   ^A-^E
           Scroll the next window up one line.

   ^A-^Y
           Scroll the next window down one line.

           (The previous four commands are useful when comparing two buffers.
           Mnemonic - think of them as affecting the "A"lternate window.)

   zH zM zL

   zt zm zb
           These are synonyms for vi's 'z+', 'z.', and 'z-', which position
           the line holding the cursor at the top, middle, or bottom of the
           screen, respectively. (Any of the second characters can be upper
           or lower case.) Mnemonically, these correspond to the H, M, and L
           screen positioning commands, or to "top", "middle", or "bottom" -
           take your choice. In a macro, only the first character of the
           argument is significant, but something like "position-window
           middle" is most readable. Supplying a count will offset that far
           from the top or bottom of window. (But the middle is always the
           middle.)

   ^X-^R

   ^X-^L
           Scroll the window right or left by 1/3 of a screen, or by the
           number of columns specified. Changes the "sideways" value. Neither
           of these commands will actually move the cursor in the buffer -
           they only reframe your view into the buffer. If the cursor would
           be forced to move off-screen (which is of course impossible and
           undesirable) as a result of the requested sideways scroll, then
           nothing at all will happen. The commands are arguably crippled as
           is.

   If for some reason you can't get your screen set right via a TERM
   variable, try the ":screen-rows" or ":screen-columns" commands (which take
   their args (number of rows or columns respectively) before you type the
   ":").

   [ I put the following bindings in my startup file (.vilerc):

     bind-key split-current-window ^T        ; split into 'T'wo windows
     bind-key next-window ^N                 ; 'N'ext window
     bind-key previous-window ^P             ; 'P'revious window

   Since ^K already 'K'ills a window, and ^O makes it the 'O'nly window,
   these give more mnemonic, and faster, access to multiple windows. (These
   would be the default, but ^N, ^P, and ^T have other meanings in real vi
   (all of which have alternate bindings in vile.) ]


File manipulation commands:
---------------------------
   The usual ":e", ":r", ":f", ":w" commands are available, though only ":e!"
   and ":w!" are available of the "!" options. The command ":w >> filename"
   appends one file to another. The ":r" command reads the named file in
   after the current line. To read a file before the first line, use ":0r".
   File completion works like command completion: using the TAB and '?' keys
   you can complete or see next character choices. Additionally, on unix
   hosts, backquotes may be used to invoke a shell command that returns the
   path of a desired file. For example:

     :e `which locks`       ; csh looks for script called "locks"
     :e `type -path locks`  ; bash equivalent

   The commands ":ww" and ":wwq" correspond roughly to ":w" and ":wq", but
   they each write all modified buffers, rather than just the current one.
   Giving any numeric argument to ":ww" (i.e. "1:ww") will suppress the
   per-file and "Press return to continue" message. This may be useful when
   using the command from within a macro.

   The write-all-buffers command attempts to write all buffers whether marked
   "modified" or not.

   As in vi, ranges of lines specified by line numbers (including '.', '$',
   and '%' shorthands) or marks may precede these commands. Unlike vi, search
   patterns cannot be used as line specifiers.

   In addition, two non-"colon" commands have been added:

   ^R
           Prompts for a filename, and then reads it in _above_ the current
           line. If a register is specified (e.g., "a^R ), the file is read
           into that named register, but not inserted into the current
           buffer.

   ^W
           is a writing operator, which prompts for a filename, and writes
           the specified region to that file. Like all operators, if the
           command is repeated, as in ^W^W, then lines are affected. Use
           10^W^W to write 10 lines.

           If a register is specified (e.g. "a^W ) then the command is _not_
           an operator, but writes the specified register to the named file.


Shell Access
------------
   Anywhere a filename is valid, a command name is also valid, entered in the
   form "!shell-command". The whole line is handed to the shell, and the read
   or write operation is done on the commands standard input or output, as
   appropriate. Thus you can type ":e !date" to edit a copy of today's date.

   The ": !cmd" shell escape works pretty much as it does in vi. The command
   ":!!" will rerun the previous such shell command.

   The '!' operator works as a filter, as expected.

   In addition, the ^X-! command runs a shell command and captures its output
   in a specific buffer, called "[Output]". This is almost identical to ":e
   !cmd", except that in that case the buffer is named according to the
   command name.

   These "output capture" commands are most useful in conjunction with the
   "error finder", '^X-^X', described below.

   Filename completion is performed on words of the shell command in response
   to a TAB character. To actually include a TAB character in the shell
   command, escape it with ^V. Command completion is not currently
   implemented - so, for instance, $PATH is not searched for possible
   completions to the first word of a command line.

   On systems supporting job control, ^Z (or ":stop") will suspend vile.

   The "set-environment-variable" (or "setenv") command can be used to export
   new or changed environment values to spawned programs. (Note that this
   might or might not affect the operation of vile features that are
   themselves controlled by environment variables, since those variables may
   only be checked once at the time that vile is started.)

   The :cd and :pwd commands are of course supported. Unlike vi, filenames
   will track their directory of origin, so you can't simply edit a file in
   one directory, cd to another, and write it. You must explicitly write to
   ./filename in the new directory to accomplish this. ":cd -" will return to
   the previous directory, as it does in some shells. The CDPATH environment
   variable provides a search path for the :cd command. This variable's path
   delimiters are host-specific, as follows:

   +------------------------------------------------------------------------+
   | Unix                                | colon                            |
   |-------------------------------------+----------------------------------|
   | DOS, OS/2, Win32                    | semicolon                        |
   |-------------------------------------+----------------------------------|
   | VMS                                 | comma                            |
   +------------------------------------------------------------------------+

   Giving an argument to the ": !" (also called "shell-command" when writing
   macros) will suppress the "Press return to continue" message after the
   command runs.

   Additional shell-related features are described in the section of this
   help file entitled "Working in a project hierarchy".


Text manipulation command:
--------------------------
   Remember, these are only the new or different commands. The standard vi
   set should still work.

   The vi "global" (":g") command is present. So is the "substitute" (":s")
   command. These both look pretty different while they're being used than
   they do in vi, due to the interactive nature of the prompting. And, since
   the searching is done right after the pattern is entered, there may be a
   slight delay while you're trying to finish typing your complete command.
   (If the pattern does not exist, you may not get to finish typing your
   command at all.) You can use the commands just as you would have in vi,
   i.e. ":g/oldpat/s//newstring/" will work. But you won't see any of the '/'
   characters. Try it- you'll get the idea. Line ranges are not possible on
   ":g", but they are on ":s".

   The ":g" command can be followed by any of the "global command" modifiers.
   Use ":describe-globals" to see the whole list, or simply use
   name-completion. These are the most commonly used:

     * l (list),
     * p (print),
     * pp (print with buffer name and line number),
     * < (left shift),
     * > (right shift),
     * r (read file),
     * d (delete),
     * L (lower case),
     * U (upper case),
     * ~ (flip case),
     * put (append yanked text),
     * Put (prepend yanked text),
     * s (substitute),
     * trim (trim trailing whitespace).

   For example, ":g/pattern/Put" will insert the contents of the default yank
   register just above every line containing "pattern". The ":g" command can
   only be used over the entire file - smaller regions are not permitted.

   The ":v" counterpart to ":g" is also implemented - it performs the given
   command on all lines that don't match the given pattern.

   The substitute command can be followed by any of 'g', a digit, or 'p', to
   do the substitution for all occurrences, the n'th occurrence, or to print
   the resulting line respectively. You can also add a 'c', and you will be
   asked to confirm each replacement before it occurs. The text being
   replaced will be highlighted, and you can answer with 'y', 'n', 'q', or
   'a'. 'a' will suppress further prompting, and will do the rest of the
   replacements.

   The ":&" and '&' commands work much as they do in vi, and repeat the last
   substitution. The '^A-&' command is a new operator (see below), so it can
   work on regions: for example use '^A-&}' to "repeat the previous
   substitution over the rest of this paragraph".

   The named marks such as "'a" work as they do in vi. vile allows a decimal
   digit as a mark. It also recognizes special marks for the beginning and
   end of a selection: '< for the beginning and '> for the end (see the
   discussion of the quoted motion command).

  Infinite Undo

   The regular undo ('u') and line-undo ('U') are available for all commands.
   They are a little more predictable than their vi counterparts, since they
   do not share the default yank register for their operation. Also,
   line-undo ('U') is available until the next change anywhere in the file,
   rather than until you leave the line.

   vile also lets you undo all changes made to a buffer since it was first
   edited (so-called "infinite undo"). The '^X-u' command will undo changes,
   one by one (or given a count, several at a time). The '^X-r' command will
   walk forward, redoing the previously undone changes one by one. A fresh
   change to the buffer will cause previously undone changes to no longer be
   redoable. Remember that with key rebinding, you can change your 'u' or 'U'
   command to be an infinite undo, making it easier to type.

   In addition, the '.' command, which normally re-executes the last
   buffer-modifying command, has special behavior with respect to undo. If
   the '.' command immediately follows one of the undo commands ('u', '^X-u',
   or '^X-r'), then it will perform another undo or redo, as appropriate. If
   there are any intervening commands, then '.' will re-execute the last
   command prior to the undo. [ This modification to the behavior of "u."
   does not conflict (much) with traditional use of '.', since by definition,
   the sequence "u." is (almost) always identical to "uu", and the latter is
   more easily typed. (Credit goes to the designers of "nvi" for this trick.)
   (the one case I know of where "u." is not identical to "uu" is when
   putting back the contents of the numbered registers: the sequence
   "1pu.u.u.u. would successively insert the contents of "1, "2, "3, "4, and
   "5, allowing you to choose the "correct" register. This sequence no longer
   works. You can still put them _all_ back with "1p..... ("1p for screen)
   and then delete the ones you _don't_ want. ]

   The number of changes stored in the undo "history" is controlled by the
   numeric mode "undolimit". The default history length is 10 - that is, only
   10 changes may be undone. Set the undolimit to 0 for truly infinite undo.
   This can consume a lot of memory. You can turn it completely off (and
   purge the undo stack) by setting noundoable.

   The cursor position after an undo may not always be the same as it would
   be in vi.

  Operators

   vi has a class of commands known as "operators". Operator commands are
   always immediately followed by a motion command. The region of text
   affected by an operator is bounded on one end by the initial position of
   the cursor, and on the other by the cursor position after the motion is
   completed. Thus the delete operator ('d') can be followed by the word
   motion command ('w'), causing the next word to be deleted. The sequence
   "dG" will delete from the cursor through the end of the file, and "d/junk"
   will delete to the next occurrence of the string "junk". As a special
   "honorary" type of motion, operators can all be "stuttered" to affect
   lines. Thus "dd" deletes one line, "4dd" affects 4 lines, etc.

   Most operators affect the region exactly, but some cause only whole lines
   to be affected. This is usually a function of what sort of motion follows
   the operator, but can sometimes be affected by the operator itself. The
   best example of motions having different effects is the 'goto-mark'
   motions, the ''' and '`' commands. If a mark is set, say mark 'a', with
   the 'ma' command, then if the command d`a is executed, the exact text
   between the cursor and the mark will be deleted. If, on the other hand,
   the d'a command is used, the deleted region will include the lines
   containing the cursor and the mark in their entirety.

   Some operators in vile can be "forced" to affect regions of whole lines,
   though the motion wouldn't normally imply it, by using the '^X' form of
   the command. (It's not really forced - it's really a separate operator.)
   For example, "d%" (assuming you are on a curly brace) will delete a
   C-style block of code. "^X-d%" will delete that same area, plus anything
   else on the lines containing the curly-brace endpoints.

   Note that some operators always affect whole lines, no matter how the
   motion is specified. The '!' operator is an example: "!w" will always
   filter an entire line, and not just a single word.

   vile extends this notion of the "shape" of a region by adding the concept
   of rectangular regions, whose boundaries are delimited by the rectangle
   whose opposite corners are at the cursor and at the other end of the
   motion, respectively. See the section "Rectangular regions" below.

   The "show-operators" command will show all available operators. The
   "show-motions" command will show all available motions. Any operator may
   be followed by any motion.

   There are several new operator commands in vile:

   ^A-~
           Is the operator form of the '~' command, so "^A-~~" changes the
           case of all characters on the current line, "^A-~w" does it to a
           word, "3^A-~}" does it for 3 paragraphs, etc. (In vile, the simple
           '~' command will take a repeat count, unlike some versions of vi.
           If you wish it to be an operator, rebind '~' to the "flip-til"
           command.)

   ^A-u
           Like ^A-~, but converts the region to upper case.

   ^A-l
           Like ^A-~, but converts the region to lower case.

   ^A-f
           Format the region based on the current fill column. The initial
           indentation of both the first and second lines of each "paragraph"
           in the region are preserved, and all subsequent lines get the
           second line's indentation. This makes indented/outdented
           paragraphs (like this one) work correctly. (This is intentionally
           _not_ the same behavior obtained by using "!fmt", since that
           behavior is obviously available elsewhere.) The usual usage of
           this command is "^A-f}", which reformats the current paragraph.
           The re-formatting begins again with each new paragraph, where a
           paragraph has the same boundaries used by the '{' and '}' commands
           - i.e. blank lines, or lines beginning in .I .L .P .Q or .b. This
           makes it possible to use "3^A-f}" or "^A-fG" to reformat multiple
           paragraphs. The reformatting operation knows a little about both
           C, C++, and shell comments, and will attempt to do the "right"
           thing with lines that start with '#' or '*' characters. (It also
           knows about the '>' character, making it fairly easy to reformat
           mail and news inclusions... but is it ethical? :-)

   ^X-s
           For every occurrence of a search string, put in a replace- ment
           string. This is similar to "s/pattern/replacement/g" over the
           region.

   ^A-&
           Is an operator in vile, similar to the traditional & command. It
           repeats the last substitution over the specified region. (Unlike
           the '&' command, this one will remember trailing g, p, l, or
           numeric options.)

   ^X-d
           Delete the region, including the lines it starts and ends on.

   ^X-c
           Change the region, including the lines it starts and ends on.

   ^X-y
           Yank the region, including the lines it starts and ends on.

   ^A-t
           Trim trailing whitespace from all lines in the region.

   ^A-<SPACE>
           Convert tabs to spaces, using the current tabstop value.

   ^A-<TAB>
           Convert as many spaces to tabs as appropriate.

   ^A-b
           Blank out a region. Turns the region to whitespace. Useful with
           rectangular regions.

   ^A-r
           Open up a rectangle. Text to the right of the left edge of the
           rectangular region will shift to the right by the width of the
           rectangle, leaving a whitespace "hole".

   ^A-q
           Sweep out a rectangle with multiple motion commands. See
           description of 'q', below.

   ^A-s
           Select and yank a region. The region will be highlighted on the
           screen, as if it had been swept by a mouse. It is also yanked, as
           with the 'y' operator. This operator is useful in combination with
           the ^S motion command, which lets one reference the selected
           region with other operators. (If you use this command much, it is
           recommended that you bind it to and easier to type sequence, such
           as 'S'.) See also the q (quoted motion) command.

  Text insertion

   ^X-p
           Causes the previously yanked or deleted text, no matter how it was
           obtained, to be inserted after the current line. Usually text that
           did not consist of whole lines where it came from is inserted
           immediately following the cursor.

   ^X-P
           As above, but the text is put before the current line. Thus "dw"
           followed by a "p" command does a normal insertion of the deleted
           word, whereas "^X-p" results in the word being inserted on a line
           by itself.

   R
           vi's overwrite mode is supported. Note that the combination of
           overwrite mode and the (ANSI) arrow keys can be used to give a
           "picture drawing" mode of operation: anything you type goes into
           the buffer without moving adjacent text, and you can move around
           using the arrow keys without leaving overwrite mode. Hint: start
           with a buffer full of lines that consist entirely of blanks (as
           opposed to blank lines).

   ^A-i
           Like their 'i', 'o', and 'O' counterparts, but any autoindent

   ^A-o
           or cmode setting is ignored for the duration of this insert.

   ^A-O
           These are most useful when pre-formatted text is being pasted, as
           when using a mouse.

  Searching

   ^X-/
           Does a forward search for the "word" located under the cursor.

   ^X-?
           Does a reverse search for the "word" located under the cursor.

   ^A-/
           Does not do a search, but sets the search pattern to the "word"
           under the cursor. Useful for "picking up" a word from one buffer,
           and searching for it in another.

   The following two commands may not always be present in vile, depending on
   how it was built:

   ^X-S
           Incremental forward searching. As you enter the search string, the
           cursor is advanced to the next match with what you've typed so
           far. Use ^F and ^R to continue the search forward or in reverse,
           using the current pattern.

   ^X-R
           As above, but in reverse.

  Tags

   vile supports vi-style "tags" files.

   ":ta" or ":tag"
           allows you to enter a tagname to locate. The editor opens a buffer
           containing the requested tag. Take note that tag completion is
           supported, so it's possible to type a partial tagname and then
           press TAB to force vile to complete the name, assuming it's
           unique. If not unique, press TAB twice to see a list of all
           possible completions. Example (using the vile sources):

         :ta is_sl<tab>

           is completed as "is_slashc" . Pressing RETURN following completion
           opens a buffer on estruct.h, with the cursor positioned at the
           first definition of this tagname.

   ^]
           Uses the identifier currently under the cursor as the tagname.

   ^T or ^X-^] or ":pop"
           - pops to the file and location just previous to the last tag
           command.

   ^A-^] or ":next-tag"
           continues searching through the tags file(s) for additional
           matches.

   When one of these commands is used, vile will (by default) look for a file
   named "tags" in the current directory, and load it into a hidden buffer
   for use during tag searches. This buffer is editable if you wish (":e
   tags"), but will not appear in the buffer lists. If a buffer named "[Tags
   1]" is already available when a tag is first requested, it will be used
   instead of a file found by searching the tags setting, and of course will
   remain visible.

   Take note that the tag locate and pop commands, by default, move the
   cursor out of the current window if the target tag is located in one of
   the editor's other windows. To "pin" all locate and pop actions to the
   current window, set pin-tagstack mode.

   The name of the default tags file may be changed with "set tags" (see
   "tags" under "Editor modes", below). If multiple filenames are given in
   the "tags" setting (separated by whitespace), they are searched in order,
   and placed in buffers named "[Tags 1]", "[Tags 2]", "[Tags 3]", etc.

   Tags searched for using '^]' will always be matched exactly. If the ":ta"
   form of the command is used, tag matches will be exact unless the mode
   "taglength" is set non-zero, in which case the first tag matching that
   many characters will be used.

   Filenames referred to in tags files are expanded, so environment variables
   and shell special characters like ~ may be used.

   The stack of buffer locations waiting to be "popped" to with the '^T' (or
   '^X-^]' or ":pop") command may be viewed with the "show-tagstack" command.
   The "[Tag Stack]" buffer is animated - it will dynamically keep track of
   current tag references.

   Limitations: In a real vi-style tags file, there are three tab separated
   fields. The first contains the tagname. The second contains the (relative
   or absolute) filename. Everything after the second tab is an arbitrary
   ex-mode command. vile is not quite so flexible as regular vi, and only
   supports a couple of commands in that last "field". It can be a line
   number, in which case the tag is an absolute index into the file. Or, it
   can be a search command. If it begins with a '/', the search goes forward.
   If it begins with a '?', the search goes backward. In either case, the
   matching delimiter _must_ be the last character on the line in the tags
   file.

   All of this isn't as bad as it sounds, since ctags, the program most
   people use to generate tags files, does generate exactly this format.
   (Surprise, surprise.) However, if you attempt to create your own tags
   files, or have other tools that do so, you should be aware of these
   limitations.

   For further tags usage examples, refer to the section of this help file
   entitled "Working in a project hierarchy".


Miscellaneous commands
----------------------
   ^A-d
           Remove blank lines ("delete-blank-lines"). If the cursor is on a
           blank line, then it and any blank lines surrounding it will be
           removed. If a non-blank line, then any immediately following blank
           lines will be removed. If given an argument, will force exactly
           that many blank lines to exist at that point, regardless of how
           many were there before. Moves current location forward, to allow
           repeated use.

   ^A-e
           Remove empty lines (delete-empty-lines). This command differs from
           delete-blank-lines:
              * empty lines contain no printable characters; blank lines
                contain no characters.
              * this command can be used with a range, and works as an
                operator.
              * the feature for forcing blank lines to appear is provided by
                another operator force-empty-lines.

   ^X-E
           Force gaps with "empty" lines (no printable characters) to have
           the same size (force-empty-lines). This uses the variable
           $empty-lines as the size that should be used. Like
           delete-empty-lines, this is an operator and can be used with a
           range.

   ^X-^X
           The "error finder". Goes to the next file/line error pair
           specified in the last buffer captured from a command's output.
           This buffer is usually created with the ^X-! command.

           For example, "^X-!cc -c junk.c" puts all of the compiler output
           into the buffer named "[Output]".

           Repeatedly hitting ^X-^X will position the editor at each error in
           turn, and will eventually start over again at the top. The buffer
           searched for "errors" will be the last shell command run, or the
           buffer named with the "error- buffer" command. The "Entering
           directory XXX" and "Leaving directory XXX" messages that GNU make
           puts out with the -w switch are honored, so that files are found
           with the correct path.

           Tip: I use the following macro to quickly grep a source directory
           for the string under the cursor:

             use-register g load-register "^X!egrep -n : *.[chs]^M"

           where the ^X and ^M are each single control characters, entered
           using ^V to escape them. Then I invoke with @g to execute. [NB:
           this macro won't work with the DOS/VMS/Win32 versions of vile,
           since ':' doesn't expand to the word under the cursor on those
           hosts due to conflicts with filename drive/disk delimiters. For
           those hosts, substitute '&' instead.]

           The command parsing is done with regular expressions. Vile
           compiles these from the buffer [Error Expressions], which are a
           set of regular expressions with extra embedded information.
           Unescaped '%' followed by 'V', 'B', 'F', 'L', 'C' or 'T'
           substitute verb (Entering/Leaving for gmake), buffer (i.e.,
           scratch buffer with a bracketed name), file, line, column and text
           fields.

           The line and column numbers are 1-based, treating tab character as
           a single column. Use %l and %c, respectively for 0-based values.

           The V, B, F, T substitutions are for nonblank fields, which is not
           always enough, so vile additionally recognizes a range in
           brackets, e.g.,

         ^%[^:   ]:\s*%L:%T

           is compiled as

         ^\([^:  ]\+\):\s*\([0-9]\+\):\(.\+\)

           The expressions can be manipulated with scripts:

             ; example of a macro to add to [Error Expressions]
             store-procedure AddError
                     ~local %oldbuffer
                     setv %oldbuffer=$cbufname
                     compile-error-expressions
                     yank-line
                     edit-file '[Error Expressions]'
                     unsetl view
                     goto-beginning-of-file
                     put-before
                     unmark
                     setl view
                     buffer %oldbuffer
                     compile-error-expressions
             ~endm

           Use the show-error-expressions command to display the contents of
           the [Error Expressions] buffer, along with the expanded regular
           expression and annotation for the substitutions. The result is
           shown in [Error Patterns].

   ^X-t
           Set or report on the tab-stop width. To set, the spacing must
           precede the command, as in "4^X-t". The "set tabstop" command
           described below does the same thing. The status output indicates
           whether the buffer is currently using the local or global copy of
           the tabstop value.

   ^X-f
           Set the local fill-column to be used with ^A-f and auto-wrap mode
           on insert. The default value is 7/8's of the screen size, with a
           maximum of 70. Since arguments come before commands, you type:
           65^X-f. The "set fillcol" command does the same thing. The status
           output indicates whether the buffer is currently using the local
           or global copy of the tabstop value.

   ^X-X
           Set current encryption key for this buffer. See "Encryption" below
           for more information.

   K
           Count prefix. The first time you type it, it is equivalent to an
           argument of 4 to the following command. If you repeat it, it
           becomes worth 16, the next time 64, etc...

   %
           In addition to finding matching braces, brackets, and parentheses,
           the '%' command will find matching #if's, #ifdef's and C-style
           comments. If the cursor is on the # of "#ifdef"/"#if", the '%'
           command will find the matching "#endif" or "#else". On an "#else"
           it will find "#endif", and on "#endif" it will go back up to the
           "#ifdef"/"#if". If the cursor is on any part of a "/*" or "*/"
           sequence, it will find the appropriate corresponding C comment
           endpoint. (See fence-if, fence-pairs to customize this behavior).

   \
           Identical to the ` motion, in that the cursor moves to the
           specified mark (i.e. \a moves to mark 'a'). When used with an
           operator command, the resulting region is rectangular instead of
           "exact". This is similar to the ' motion, which also goes to [the
           line holding] the mark, and causes regions to become "full line"
           regions.

   q
           A "quoted motion" command. After entering 'q', more motion
           commands are accepted until another 'q' is entered. The result of
           the motion is the cumulative effect of all the entered motions.
           Thus, one might type:

         dq<arrow><arrow><arrow>...<arrow>q

           to delete all of the text between the starting point and the final
           cursor position.

           Any motion command can appear in between the two 'q' commands. If
           used alone, i.e., not in an operator context, then the spanned
           text is highlighted, and yanked on completion (as well as setting
           the special named marks '< and '>) as a side effect. The resulting
           selection can then be manipulated with the ^S pseudo-motion,
           below. The selection-clear command removes the selection's
           highlight attributes.

           Most motions will select up to but not including their endpoint.
           The 'e', 'E', 'f', 't', and '%' commands are exceptions to this.
           If used in an operator context the cursor position may sometimes
           appear incorrect. This is because operators sometimes change the
           cursor location internally to force the motion to do the "right"
           thing, and the 'q' command makes these internal "fudge factors"
           visible. An example of this is "dq%q" which does the right thing
           (assuming the cursor is on a '(' to start) but which looks wrong,
           since the cursor will overshoot the ')' before the second 'q' is
           typed.

           If a mouse is available on a Unix host, whether in an xterm via
           the "xterm-mouse" setting, or in xvile, then button 1 can be
           clicked to do the extensions, since it, too, is a motion command.
           (Of course in xvile or winvile, it is easier to simply "click and
           drag" - the 'q' command isn't really necessary at all.)

           Use the repeat-count to specify types of selection: exact=1
           (default), full-line=2, rectangle=3.

   ^A-q
           As above, but the motions will sweep out rectangular regions.

   ^S
           A motion, or "pseudo-motion" command. If a region of text has been
           previously selected, either with the mouse (if available) or with
           the keyboard selection operator (^A-s) it can be referenced by any
           other operator by applying that operator to the ^S motion. As an
           example, suppose a word is selected with the mouse, or with ^A-sw.
           Then, from anywhere in that buffer, one can use d^S to delete that
           word. ^S used by itself will move the cursor to the start of the
           selected region. ^S applied to the selection operator (^A-s) will
           extend the current selection to include the current location of
           the cursor.

           ^S makes it possible to select any region (including rectangular
           regions) of text with a mouse, and then apply any vi operator to
           that region.

   =
           If "visual-matches" is set, then vile will highlight all
           occurrences of a pattern that is searched for with one of the
           usual searching commands. The '=' command will clear this
           highlighting, until the next search for a different pattern.

   :select-all
           On hosts where vile provides mouse support, the select-all command
           selects, highlights, and yanks all text in the current buffer to
           the unnamed register. Clear the selection's highlight attributes
           as follows:

           +----------------------------------------------------------------+
           | Technique                       | Applies To                   |
           |---------------------------------+------------------------------|
           | selection-clear command         | any host                     |
           |---------------------------------+------------------------------|
           | left mouse button (LMB) click   | winvile                      |
           |---------------------------------+------------------------------|
           | click mode line with LMB        | win32 host                   |
           |---------------------------------+------------------------------|
           | press ESC                       | winvile                      |
           +----------------------------------------------------------------+

  Internal State

   vile can display more of its internal "state" than traditional vi.
   Portions of the internal "state" may be viewed using various "show-xxx"
   commands:

   :show-abbreviations
           displays list of shortcuts defined with the ":abbr" command.
           (synonymous with ":abbr<cr>")

   :show-buffers
           displays the current list of available buffers. Given any numeric
           argument, will list _all_ buffers, even those normally invisible
           or considered temporary.

   :show-color-schemes
           displays a color chart of the user-definable color schemes (see
           palettes.rc for examples)

   :show-colors
           displays a color chart of the builtin color names, the internal
           coding used in the syntax filters (e.g., C0), the $palette mapping
           and examples in bold, italic, etc.

   :show-commands or show-bindings
           displays the list of commands and the keys bound to them.

   :show-global-modes, show-modes
           both synonymous with ":set<cr>"

   :show-help
           synonymous with ":help", '^A-h', etc.

   :show-history
           displays the user's command line history.

   :show-local-modes
           Shows the local value of each mode, if it differs from the global
           value. If a majormode is set on the buffer, that is used for the
           "global" value in this display.

   :show-majormodes
           displays the builtin and user-defined major modes.

   :show-mapped-chars
           displays the strings mapped for command mode with ":map".
           (synonymous with ":map<cr>")

   :show-mapped!-chars
           displays the strings mapped for insert mode with ":map!".
           (synonymous with ":map!<cr>")

   :show-printable
           displays a table of the first 256 printable characters, with
           associated types. To allow it to fit within 80 columns,
           abbreviations are used, which are the same names as used in
           character classes.

           Use a repeat count to show data for the wide locale. The default
           (no repeat count) shows the narrow locale. Use show-wide-printable
           to see wide characters past the first 256.

           If showchar is set, this also shows a line for the current
           character in the current buffer, with the character type
           information for that character.

   :show-registers
           displays the current contents of the named and numbered registers.

   :show-system-mapped-chars
           displays the strings mapped to represent the terminal's function
           keys.

   :show-tagstack
           displays the contents of the "tags stack", the list of locations
           from which the ":ta" or '^]' commands have been used, and to which
           the ":pop" and '^T' (or '^X-^]') commands will return.

   :show-terminal-chars
           displays the list of special chars normally associated with the
           TTY driver, i.e. backspace, interrupt, suspend, etc.

   :show-variables
           displays the list of vile state $variables and temporary
           %variables, and their values. Use a repeat count to show all mode
           variables, including majormode submodes rather than just the state
           variables.

   :show-wide-printable
           displays a table of the "wide" (Unicode) printable characters,
           with associated types. To allow it to fit within 80 columns,
           abbreviations are used, which are the same names as used in
           character classes.

           Use a repeat count to show the data for successive "pages" of 256
           characters, e.g., 1 for 256-511, 2 for 512-767, etc.

           This uses the same buffer as show-printable. If showchar is set,
           this also shows a line for the current character in the current
           buffer, with the character type information for that character.


New Registers
-------------
   In addition to the usual "a through "z, and "1 through "9, vile has
   additional registers.

   The register named '<' contains the last few hundred keystrokes that have
   been typed by the user. The principle use for this is to make it easier to
   create :map commands based on commands you've already given. [It's also
   useful sometimes when debugging to be able to see what key sequence led to
   a problem...]

   The register name '.' contains the current selected text in xvile. Also in
   xvile, the register name ';' is a synonym for the clipboard. Other
   versions of vile permit use of '.' and ';' as supplemental register
   storage.

   The register name '"' (" is double-quote) is a synonym for the default
   unnamed register, which is also sometimes referred to as register 0.


Completion
----------
   Many responses to vile prompts need not be typed in their entirety. vile
   can complete the response for you. This applies to command names, file
   names, vile modes, vile variables, tags, buffers, and the "terminal
   characters".

   To invoke vile completion, type a few characters and hit TAB (or your
   current "name-complete" terminal character). Hitting it a second time will
   pop up a window containing the list of possible completions. If there are
   more completions than will fit in the window, hitting further TAB
   characters will cause that window to scroll through the choices. The
   window will go away when the current command is finished.

   An older form of completion is also supported:
   You can also type a question mark (or the current "test- completions"
   terminal character) to display a list of the characters that you would
   have to type to complete the command. For example, to complete the
   "unmark" or "unmap" commands:

         :unm?                   - you type
         :unm{a}[pr]             - you see

   This style of completion-display shows curly braces around the string that
   will be supplied by pressing TAB, and square brackets around characters
   that you must type to make the command unique.


Arrow keys
----------
   vile will understand your terminal's arrow keys, as long as they are
   described correctly in the termcap/terminfo database. The keys are
   interpreted as function keys, and are by default bound to the up, down,
   left, and right screen motions. These bindings are honored in insert mode
   as well as command mode.


Rectangular regions
-------------------
   Just as the regions defined by vi's commands and motions can either be
   "exact", or encompass "full lines", regions in vile can in addition be
   "rectangular". The easiest way to use a rectangular region is with the '\'
   motion, which, like '`' and ''', goes to a named mark. The region it
   describes, however, is "rectangular" (instead of "exact" or "full line").
   The following operators know how to correctly act on rectangular regions:

   ^A-r
           Opens up a rectangle. Text to the right of the left edge of the
           rectangle is shifted right by the width of the rectangle.

   >
           Shift right. Identical to '^A-r' when region is rectangular.

   d
           Deletes the (rectangular) region. Text to the right moves left to
           fill the rectangle.

   <
           Shift left. Identical to 'd' when region is rectangular.

   y
           Yanks the (rectangular) region. (vile remembers that the yanked
           text is rectangular in shape.

   c
           Change the region. If the region is _not_ rectangular, insert mode
           is entered after the region is deleted. If the region _is_
           rectangular, the user is prompted for text with which the lines of
           the rectangle will be filled.

   ^A-u

   ^A-l

   ^A-~

   ^A-b
           These four operators perform their character transformations on
           rectangular regions, as well as exact or full-line regions.
           (uppercase, lowercase, flip-case, and blank, respectively)

   p P
           The 'put'ting commands know whether the text being 'put' was
           originally rectangular, and will do a rectangular insert of the
           text, in front of or behind the cursor. The cursor position
           defines the upper left corner of the insertion.

   ^A-p
           These two forms of the put command force the text being

   ^A-P
           'put' to be inserted as if it had been rectangular when originally
           yanked or deleted. The width of the rectangle is the length of the
           longest line in register being 'put'.

   Note that because it is sometimes hard to manipulate rectangles containing
   or bordering on tab characters, currently (for some operations) vile
   "detabs" the region being operated on before commencing, and re-entabs the
   lines again after the operation. The re-entabing is limited to leading
   whitespace, and of course is suppressed if "notabinsert" mode is set. [
   This misfeature is arguably a bug, and may be fixed. In the meantime,
   you've been warned. ]


Editor modes
------------
   Modes come in various flavors and types and constitute the editor's
   primary configuration mechanism. vile supports these mode types:

   boolean enum int string

   The value of a mode is specified via "set" or "setl" (the latter command
   _only_ affects buffer modes, as described below). Mode values may be
   cleared with "unset" (or "unsetl" for buffer modes), as well as other
   idioms described later. Clearing a mode, by the way, is a fancy way of
   saying that its value is set to 0 or "", the latter for string types. When
   an enum mode is cleared, vile selects whichever enum constant is assigned
   the internal (read compiled) value of 0. Some concrete examples:

   +------------------------------------------------------------------------+
   | Technique                           | Applies To                       |
   |-------------------------------------+----------------------------------|
   | mode type        | mode name        | example usage                    |
   |------------------+------------------+----------------------------------|
   | boolean          | autoindent       | set autoindent                   |
   |------------------+------------------+----------------------------------|
   | enum             | visual-matches   | set visual-matches=reverse       |
   |------------------+------------------+----------------------------------|
   | int              | fillcol          | set fillcol=75                   |
   |------------------+------------------+----------------------------------|
   | string           | tags             | set tags="../tags tags"          |
   +------------------------------------------------------------------------+

  Flavor: universal modes

   These modes are not directly associated with buffers, windows, or
   languages. Consequently, a universal mode affects the editor under all
   relevant operating conditions.

   To set/modify a universal mode, use the "set" command. Startup file
   examples:

         set vtflash=normal
         unset flash           ; or    set noflash
         set errorbells

   Since the set command (within a startup file) accepts multiple modes, this
   oneliner is equivalent:

         set vtflash=normal noflash errorbells

   To clear a universal mode use one of these idioms:

         set    no<modename>
         unset  <modename>
         setno  <modename>

   For completeness sake, note that the "local" version of the set/unset
   commands ("setl"/"unsetl") do not make sense (and elicit no effect) when
   used with universal modes.

  Flavor: buffer modes

   These modes are inherited from a set of "global" buffer modes, but bound
   to a specific buffer once a "local" value is independently established. To
   set and reset local modes, use "setl", "unsetl", or "setlno". An actual
   example is useful for illustration purposes.

   When vile is started, the global value of "view" mode is unset by default
   (i.e., false) and all newly visited buffers are editable. But suppose I
   edited the file "precious.cpp", which I did not want to modify. There are
   two approaches that could be taken:

         $ vile
         :set view          ; enable view mode globally
         :e precious.cpp    ; edited in "view" mode
         :e other.cpp       ; ditto

   or

         $ vile
         :e precious.cpp    ; initially edited in "noview" mode
         :setl view         ; "view" mode now bound to precious.cpp
         :e other.cpp       ; edited in "noview" mode

   In the first approach, view mode is enabled globally and consequently
   affects all existing buffers and all subsequently created buffers. This
   solution works for the stated goal, but makes it impossible to modify any
   other buffers. The second approach affects only the targeted file.

  Flavor: window modes

   Similar to buffer modes, window modes are bound to a specific window once
   a local value is independently established. These modes are set/cleared
   with the same commands as buffer modes.

  Flavor: majormodes (later)

   Until the subject of syntax coloring is described, it's not very useful to
   discuss majormodes. So, in the listing of modes below, skip over anything
   tagged with (M). But don't fret, these modes are described separately in
   the topic entitled "Majormodes".

  Current mode settings

   To display modes, use "setall", "modes", "set all", or simply "set". vile
   displays all of the current mode values in the [Settings] buffer.

   vile shows local mode values only if they differ from the global values,
   whether they have been independently set or not.

   To show just the local mode values that differ from the global values, use
   show-local-modes.

  Modes in detail

   Shown next is a listing of vile's various modes. Synonyms, if they exist,
   are shown in parentheses and a trailing U, B, W, or M indicates whether
   the mode is universal, buffer, window or major.

   alt-tabpos (atp)
           If set, vile will position the cursor over tab and control
           characters the way emacs would, that is, at the start of a tab or
           control character display sequence. If turned off (the default),
           the cursor is positioned over tabs and control characters the way
           it would be in vi, i.e. at the end of the tab or control character
           display sequence. (To match the behavior of earlier versions of
           vile, should be set.) (U)

   animated
           Controls whether vile automatically updates the contents of
           scratch buffers when their contents would change as a side effect
           of commands. To retain the position within buffers when recreating
           them, use the reuse-position mode.

           The animated buffers include:

         [Binding List]
         [Buffer List]
         [Color Palette]
         [Color Schemes]
         [Command-Bindings]
         [Error Expressions]
         [Error Patterns]
         [Extra Colors]
         [Insert-Bindings]
         [Major Modes]
         [Map Sequences]
         [Map! Sequences]
         [Named Marks]
         [Printable Chars]
         [Registers]
         [Select-Bindings]
         [Settings]
         [Tag Stack]
         [Terminal Characters]
         [Variables]

           Turning off "animated" is rarely necessary: the capability is
           present mostly as a debugging aid. (B)

   autobuffer (ab)
           Controls whether vile uses "most-recently-used" style buffering,
           or vi-style (command-line order) buffers. That is, if autobuffer
           is on, then buffers are sorted in order of use, in that buffers
           not frequently used will drift to the end of the list. If this
           mode is not on, then vile will behave more like vi, in that
           buffers remain in a fixed order, that in which they were edited.
           (U)

   autocolor (ac)
           Automatic syntax coloring. If set to zero, automatic syntax
           coloring is disabled. Otherwise, it should be set to a small
           positive integer which represents the number of milliseconds to
           wait before invoking the "autocolor-hook" hook. The editor will
           wait the specified amount of time for a "quiet interval" during
           which the user hasn't pressed any keys. (B)

   autowrite (aw)
           vile will write out any changed buffers for which this mode is set
           before performing a ^Z, "stop", "suspend", ":!<cmd;>", or
           '^X-!<cmd;>'. The ":sh" command is not affected, nor is ":stop!"
           or ":suspend!". Since buffers inherit the global value of a mode,
           simply setting the global autowrite value will cause all buffers
           to be auto-written. Individual buffers can be forced or prevented
           from autowriting by setting the local value of the mode for those
           buffers appropriately. [In real vi, autowrite mode will also force
           buffers to be written when switching between files. This is
           unnecessary in vile.] (B)

   autoindent (ai)
           During insert, newly created lines inherit their leading indent
           from the previous line in the buffer. (B)

   autosave (as)
           Automatic file saving. Writes the file after every 'autosavecnt'
           characters of inserted text. Other file changes are not counted.
           (B)

   autosavecnt (ascnt)
           How often (after how many inserted characters) will automatic
           saves take place. 256 by default. (B)

   backspacelimit (bl)
           When in insert mode, this controls whether one can backspace past
           the point at which the insert began. (B)

   backup-style
           Specifies the style used for creating file backups when a file is
           written. Can have values of "off", ".bak", and (under UNIX)
           "tilde", for no backups, DOS-style .BAK files, and file.c~ style
           backups, respectively. Files are copied before being written, to
           protect links to the original file. Permissions, modification and
           access times are all preserved. If creation of the backup fails,
           the write of the file will fail, unless it is forced using the
           ":w!" form of the write command. (B)

   bcolor
           On systems supporting this, will set the background color. On most
           systems, the choice of colors is fixed, although the X11 version
           (xvile) can be given customized colors at startup or via
           .Xdefaults. See notes about the color palette down below, under
           DOS specifics. (U)

   byteorder-mark (bom)
           is a prefix used to distinguish different types of UTF-encoding.
           It must be one of the following values:

         "auto"
         "none" (default)
         "utf-8"
         "le-assumed"
         "be-assumed"
         "utf-16le"
         "utf-16be"
         "utf-32le"
         "utf-32be"

           The "auto" setting tells vile to set the buffer's byteorder-mark
           value based on whatever the file-encoding happens to be.

           The default value is "none", which is slightly different, telling
           it to accept byteorder-mark values as in "auto", but not to write
           them for buffers which have no explicit byteorder mark set.

           The "utf-XXX" values are explicit settings, which override the
           auto/none logic. Use "le-assumed" or "be-assumed" for cases where
           the platform's preferred byteorder is known, and where byteorder
           marks may be absent from files, e.g., with Windows. (B)

   bufname-expr
           Regular expression used for parsing of $bufname, subject to the
           cursor-tokens mode. If the expression is inactive, use
           character-class based internal function which combines buffer- and
           filename-classes. This is a buffer mode. (B)

   ccolor
           On systems supporting this, will set the cursor color. On most
           systems, the choice of colors is fixed, although the X11 version
           (xvile) can be given customized colors at startup or via
           .Xdefaults. See notes about the color palette down below, under
           DOS specifics. (U)

   check-access
           Check file permissions before source'ing it in a script. This
           tells vile to ensure that it uses only files that you own (or root
           owns), which are not writable by other users. Values include:

                none
                        disables the check

                current
                        checks files in the current directory.

                home
                        check files in the home directory in addition those
                        checked for "current".

                startup
                        check files in the startup path, as well as those
                        checked for "home".

                always
                        like "startup", but also check permissions for
                        datafiles such as tags, menus and help-file.

           The default value is "current". (U)

   check-modtime
           Check modification-time. If a file has changed since it was last
           read or written, vile will issue a "file newer than buffer"
           warning and prompt appropriately for confirmation when
             1. popping up a window on an existing buffer,
             2. reading or writing the buffer, or
             3. after performing some shell command.

           The prompt will occur only once, unless the file changes again, in
           which case the warning will be repeated. The warning will be
           repeated in any case if the file is being written. Invoking a
           shell, or suspending/restarting vile, will cause all visible
           buffers (those currently in windows) to have their times checked
           immediately. A file is considered "changed" if its modification
           time changes, or, under UNIX, if it is replaced entirely,
           resulting in a different inode number. (The "unique-buffers" mode
           must be active to enable the latter behavior.) (B)

   cindent (ci)
           C-style indentation. Helps maintain current indentation level
           automatically during insert, like autoindent, above. See
           cindent-chars for additional information. Note that when the
           majormode cmode is in effect, cindent assumes a local buffer mode
           value of true. (B)

   cindent-chars (cic)
           The list of characters interpreted by the cindent mode. These
           include

                '#'
                        when a line starting with '#' is inserted, it is
                        indented to column 1. This is a temporary indent;
                        succeeding lines are indented normally. Also, lines
                        beginning with a '#' will not shift right with the
                        '>>' command.

                ':'
                        indent the next line further, e.g., after a label.

           as well as any character that may be listed in fence-pairs. If it
           is listed in cindent-chars as well, the left-character of a pair
           causes the next line to be indented more, and the right-character
           causes the next line to be indented less. (B)

   cmode
           C-code mode. A built-in majormode that predefines cindent mode and
           separate suffix, tab and shiftwidth submodes. The topic "cmode:
           the original vile builtin majormode" discusses this majormode in
           more detail. (M)

   crypt
           Causes buffer(s) to be decrypted when read, and encrypted when
           written. This is compatible with the UNIX crypt(1) routines used
           by vi, and is only available on platforms which have this feature
           enabled. See the section on "Encryption" for more information. (B)

   color-scheme (cs)
           An aggregate of fcolor, bcolor, video-attrs and $palette. Color
           schemes are defined with the define-color-scheme command. (U)

   comment-prefix
           A regular expression denoting the portion of a line that is
           replicated and untouched, except for leading indentation when
           doing text formatting. The expression should begin with "^", e.g.,
           the default value ^\s*\(\s*\([#*>]\)\|\(///*\)\)\+ is useful for
           matching shell comments (#), multi-line C comments (*), multi-line
           C++ comments (//), and email (>). (B)

   comments
           A regular expression defining commented paragraph delimiters. This
           is used in addition to the "paragraphs" expression (see below)
           when reformatting a region. The net effect is that paragraphs
           inside of these comments are preserved when doing text
           reformatting, but are not reachable with the '}' and '{' motions.
           A pattern that consists of an empty comment line usually works
           well. (B)

   cursor-tokens
           Controls whether vile uses regular expressions or character
           classes for parsing tokens from the screen for various commands.
           This uses an enumeration: both, cclass and regex. If "both", vile
           tries matching first with the regular expresion, e.g.,
           bufname-expr for $bufname, and if that does not match anything,
           uses the character-classes. The main reason for providing the
           "both" option is that the older character-class based parsing for
           buffer name does not correspond exactly to a regular expression.
           (B)

   dirc
           Causes vile to check each name when scanning directories for
           filename completion. This is slower, but provides additional
           information allowing you to distinguish between directory and file
           names in the prompt. (U)

   dos
           On input, if the global copy of this mode is set, then incoming
           CR/LF pairs are taken as line terminators, the CR characters are
           stripped out, and the local dos mode is set for the buffer.
           (Actually, the local dos mode is only set if the _majority_ of
           lines had CR characters at the end.) If global dos mode is _not_
           set, then incoming CR characters will be left visible on the
           screen (as '^M'), and the local mode will not be set.

           The percent-crlf mode tells vile how many lines in the buffer must
           have CR/LF endings for it to automatically treat a buffer in this
           manner.

           On output, when writing a buffer with local dos mode set, all
           lines will be terminated with CR/LF pairs, rather than the usual
           single LF.

           When buffers representing non-existent files are created they will
           inherit the line-style of the operating system (LF-only on UNIX
           and VMS, CRLF-style on DOS derivatives) regardless of the global
           setting of dos mode. However, even this can be overridden using
           the -u and -U options, which preset the $system-crlf variable used
           to initialize dos mode.

           Setting dos mode makes editing binary files unreliable.

           The global value for this mode is set on by default in DOS
           versions of vile, and should therefore be turned off if doing
           binary editing. (B)

   errorbells (eb)
           Controls whether a bell sounds (or whether the screen flashes, if
           "flash" mode is on) when an error occurs. (U)

   expand-chars
           Controls the set of characters that are expanded in command lines.
           These include '%' (the current buffer), '#' (the alternate
           buffer), '!' (the last shell command) and ':' (the token at the
           cursor position). For VMS, MS-DOS, OS/2, and Win32 hosts, this is
           '&'. (U)

   expand-path
           Controls whether %/# are expanded to the full pathname of a
           buffer, or just to its basename (i.e. the name with the path
           stripped off). (U)

   fcolor
           On systems supporting this, will set the foreground color. On most
           systems, the choice of colors is fixed, although the X11 version
           (xvile) can be given customized colors at startup or via
           .Xdefaults. See notes about the color palette down below, under
           DOS specifics. (U)

   fence-begin

   fence-end
           Respectively, the regular expressions for balancing simple
           (character-oriented, non-nestable) fences. (B)

   fence-if

   fence-elif

   fence-else

   fence-fi
           Respectively, the regular expressions for balancing line-oriented,
           nested fences, e.g., as C-preprocessor lines (the default). (B)

   fence-limit
           Iteration timeout for complex fences, to limit pathological cases,
           e.g., with Perl's ambiguous block syntax. (B)

   fence-pairs (fences)
           Each pair of characters in this string is taken to be a set of
           "fences", which should be matched with the '%' command. The
           default value is "{}()[]", which produces normal vi behavior. This
           can, for instance, be augmented with the '<' and '>' characters
           ("{}()[]<>>") to cause angle brackets to be matched as well. See
           "showmatch" mode for another use of the "fence-pairs" mode. (B)

   file-encoding (fk)
           This is the character encoding of the buffer contents, which is
           not necessarily the same as the display's character encoding. It
           must be one of the following values:

         "8bit"
         "ascii"
         "auto"
         "locale" (default)
         "utf-16"
         "utf-32"
         "utf-8"

           The "auto" setting tells vile to determine the encoding by
           inspecting the buffer contents. The "locale" setting tells vile to
           assume that the buffer contents are in the current locale's
           encoding. The "8bit" setting corresponds to the 8-bit locale
           support used since 9.3i (20021223). (B)

   fillcol (fc)
           Sets the value for the fill column, which is the column at which
           autowrapping and region formatting will break lines. If zero, use
           the wrapmargin. If negative, count from the right margin. (B)

   filtermsgs (fm)
           A few syntax errors are detected and highlighted by the
           syntax-highlighting filters. If set, this mode directs vile to
           write into the [Filter Messages] buffer the associated error
           messages, which can be used with the error-buffer command to step
           through the errors. (B)

   filtername (fn)
           Specify a syntax-highlighting filter, for a given majormode. This
           is used in the filters.rc file, to handle special cases where
           different sets of keywords are applicable to a common syntax,
           e.g., C, C++ and Java. End users will not typically modify this
           mode. (B)

   find-cfg
           Configures the builtin find feature, which is available on win32
           and Unix hosts. For further details, refer to the section of this
           help file entitled "Working in a project hierarchy". (U)

   flash
           If your terminal can, will flash the screen rather than beeping on
           errors. No audible or visible indication will occur at all if
           "errorbells" mode is not set on. See also the vtflash mode
           (described below). (U)

   for-buffers (fb)
           specifies whether globbing or regular expressions are used to
           select buffer names in the for-buffers and kill-buffer commands.
           (U)

           The choices are

                mixed
                        globbing with special exclusion for internal names,
                        i.e., with square brackets

                glob
                        the same as filename globbing

                regex
                        regular expressions

   glob
           Controls how wildcard characters (e.g., '*' and '?') are treated
           in prompts for filenames. Set glob to 'off' to disable expansion,
           or to 'on' to use the internal globber. The internal globber will
           handle *, ?, [a-z] style ranges, environment variables, and the
           ~user notation for finding home directories.

           On UNIX, glob can be set to be a pipe command that will expand
           more wildcards. The default value of glob on UNIX is "!echo %s",
           which should provide globbing that matches that of your shell. If
           set to a command that will separate filenames with newlines or
           nulls rather than spaces, then filenames containing spaces may be
           more easily edited. ("!/bin/ls -d %s" is one possibility, "!glob
           %s" is another if you use csh.) (U).

   highlight (hl)
           When false, syntax highlighting is disabled in the corresponding
           buffers. This allows you to disable highlighting for all buffers
           or only certain ones. (B)

   history (hi)
           When true (the default), commands from the :-line are logged in a
           buffer [History]. Turning this off causes the buffer to be
           removed. (U)

   horizscroll (hs)
           If the cursor is moved "off-screen", this mode controls what
           happens. If set (as it is by default), the whole screen will shift
           sideways to make the cursor position visible. If not set, then
           only the current line will shift, which may be desirable on slower
           displays. (W)

   identifier-expr
           Regular expression used for parsing of $identifier, which also
           corresponds to the pattern under the cursor used in tags and
           "screen-search-pattern-grab", etc., subject to the cursor-tokens
           mode. If the expression is inactive, use character-class, e.g.,
           the equivalent of

         \<[[:ident:]]\+\>

           This is a buffer mode. (B)

   ignorecase (ic)
           Text searches normally match the pattern exactly. With this set,
           searches are case-insensitive. (B)

   ignoresuffix (is)
           Strip the given pattern from a filename before matching it for
           majormode suffixes. Note well the difference between the mode's
           name and its behavior. (B)

   implybuffer (ib)
           Causes vile to create a buffer when you write to a new file, or
           read from one (e.g., with ":r"). (U)

   insert-exec (ie)
           Tells vile to interpret control characters for movement and
           undo/redo if they are bound to appropriate functions during insert
           mode. For example, ^F and ^B would scroll forward and backward. ^A
           and ^X bindings are honored as well. (U)

           See the discussion of insert mode, in particular

         describe-insmode-bindings
         describe-insmode-key

   linebreak (lb)
           When linewrap mode is set, add blanks in the display to avoid
           splitting "words" (any nonblank text). (W)

   linewrap (lw)
           Displays lines that are too long to fit on one line as a series of
           "wrapped" lines. Overrides left/right scrolling controlled by
           "sideways" and "horizscroll" modes. (W)

   list (li)
           The buffer will be displayed with tabs and newlines made visible,
           instead of as whitespace. (W)

   loading
           A flag whose state may display in the mode/status line, used by
           the capture.pl script to show when asynchronous data is loading.
           (B)

   magic
           Honor unescaped regular expression metacharacters in search
           strings. See the section "Regular Expressions" for more detail.
           (B)

   maplength
           Controls the maximum length of a :map string, to prevent runaway
           recursion. This is the total number of characters that can be
           gotten during a :map expansion; vile pushes characters onto the
           stack, so this is only a rough measure. (U)

   maplonger
           Controls whether the longer or shorter of two "nested" map strings
           will be favored by the editor. When set, vile will match the
           longest available mapped string. When reset, (the default) vile
           will match the shortest available map. For more information, see
           the section describing the ":map" command, below. (U)

   mcolor
           Specify the color of the modelines, normally in reverse video. See
           also "Setting Extra Colors". (U)

   meta-insert-bindings (mib)
           Controls behavior of 8-bit characters during insert. Normally,
           key-bindings are only operational when in command mode: when in
           insert mode, all characters are self-inserting. If this mode is
           on, and a meta-character (i.e. a character with the 8th bit set)
           is typed which is bound to a function, then that function binding
           will be honored and executed from within insert mode. Any unbound
           meta-characters will remain self-inserting. (B)

   mini-hilite (mh)
           When user toggles editing mode in the minibuffer (^G, mini-edit),
           display the minibuffer with the given attribute. These are the
           same as for visual-matches. (U)

   mode-filename (mf)
           A regular expression describing filenames for which the
           corresponding majormode will be set. The expression is applied
           only to the portion of the complete pathname after removing the
           directory name. (M)

   mode-pathname (mp)
           A regular expression describing pathnames for which the
           corresponding majormode will be set. The expression is applied to
           the complete pathname, in contrast to mode-filename. (M)

   modeline
           Controls whether a vi-like modeline feature is enabled. This is a
           different term than the emacs-like modeline which acts as a
           status-line for each window. When enabled, vile scans the given
           number of lines from top and bottom of the buffer when it is first
           loaded into memory. It looks for lines containing one of these
           special markers after whitespace:

         "vi:"
         "vile:"

           or (depending on the configuration):

         "xvile:"
         "winvile:"

           After that, either a "set" command terminated by a colon, e.g.,

         vile:txtmode:

           or one or more mode assignments, treating colons as a whitespace
           separator, e.g, these are equivalent,

         vile:ts=4 nu
         vile:ts=4:nu

           The modelines at the top of the buffer are processed first
           (working forward from the top), then the ones at the bottom
           (working backward from the end). If the buffer is small enough,
           the available modelines could overlap; but the program interprets
           each line at most once.

           This is a buffer mode, enabling its use in majormodes. (B)

   modelines
           Controls the number of lines from each end of the buffer to scan
           for vi-like mode lines. Defaults to 5 (B)
           A regular expression describing pathnames for which the
           corresponding majormode will be set. (M)

   mouse
           for OS/2, enable/disable the mouse in the console-window version.

   multibeep
           If a motion command fails, then vile, like vi, will normally sound
           the bell. Turning this mode off prevents subsequent identical
           motion failures from also sounding the bell. That is, if you
           repeat a failed motion many times (e.g. by holding down the
           backspace key), you only get one beep. (U)

   newline (nl)
           The buffer ends with a newline. This is set when reading a buffer.
           (B)

   number (nu)
           All lines in the buffer will be prefixed by their line number. (W)

   overlap-matches
           Modifies the highlighting shown by visual-matches to control
           whether overlapping matches are shown. For some conditions,
           setting this to false will present a more natural view, e.g.,
           "\a+", which would match sequences of alphabetic characters. In
           the normal case (show overlap), each time a new match begins vile
           will toggle the highlighting and produce an irregular effect. (B)

   paragraphs
           A regular expression defining where the "next-paragraph" ('}') and
           "previous-paragraph" ('{') commands will go. (B)

   pathname-expr
           Regular expression used for parsing of $pathname, which is
           expanded by ":" (or "&") in the minibuffer, subject to the
           cursor-tokens mode. If the expression is inactive, use
           character-class, e.g., the equivalent of

         \<[[:file:]]\+\>

           This is a buffer mode. (B)

   percent-autocolor
           Maximum percentage of time during the autocolor interval that is
           desired to use for coloring the buffers. This helps with very
           large files, which take more time. If vile uses more time, then it
           will skip subsequent updates for the buffer, to keep up. When it
           does this, it sets a local copy of the autocolor buffer mode with
           the effective interval which is used. If this mode is zero, it is
           ignored, and vile can use 100% of the interval for autocoloring.
           (B)

   percent-crlf
           Percentage of total lines which must end with CR/LF for vile to
           automatically convert buffer's recordseparator to crlf, if dos
           mode is set. (B)

   percent-utf8
           Percentage of total characters which contain embedded nulls,
           making them look like UTF-16 or UTF-32 encodings. If file-encoding
           is set to "auto", and the match is higher than this threshold,
           vile will load the buffer data as UTF-8. The default (90) works
           well for text which is mostly Latin-1; you should set this to a
           lower value to work with text which does not follow that pattern.
           (B)

   pin-tagstack
           If set, the editor does not change windows when executing tag
           locate/pop commands. Put another way, all tag push and pop
           operations are "pinned" to the current window. (U)

   popup-choices (pc)
           Must be set to one of the following three values:
             1. "off",
             2. "immediate", or
             3. "delayed"

           When enabled with either "immediate" or "delayed", vile pops up
           the [Completions] buffer showing choices for filename and command
           completion in response to a TAB. "immediate" will force the buffer
           to be popped up immediately if no progress is made in forming a
           completion. "delayed" will cause vile to wait until TAB is pressed
           a second time before popping up the completion choices. (U)

   popup-msgs (pm)
           When enabled, vile pops up the [Messages] buffer showing the text
           that was written to the message line. Closing the window clears
           its content until the next message is written. This is most useful
           during the debugging of macros, since many messages may appear,
           each overwriting a previous one. This mode is treated specially
           during startup; unless the startup file (e.g., .vilerc) sets it,
           all messages will be popped up, then the mode will be initialized
           to "false". (U)

   preamble (pre)
           A regular expression describing the first line of filenames for
           which the corresponding majormode will be set. For example, you
           may have a majormode "sh", with sh-preamble set to
           "^#\s*!\s*\/.*sh\>" to match the lines "# ! /bin/sh", "#!/bin/csh
           -f", etc. (M)

   printing-low
           The integer value representing the first of the printable set of
           "high bit" (i.e. 8-bit) characters. Defaults to 0. Most foreign
           (relative to me!) users would set this to 160, the first printable
           character in the upper range of the ISO 8859/1 character set.
           Characters 128-159 are control characters in the ISO scheme (e.g.,
           ISO 8859-1). (U)

   printing-high
           The integer value representing the last character of the printable
           set of "high bit" (i.e. 8-bit) characters. Defaults to 0. Set this
           to 255 for ISO 8859/1 compatibility. The printing-low and
           printing-high modes are not necessary if your system supports the
           locale functions. (U)

   reader-policy (rp)
           Control whether buffers are initially read using the fast and/or
           slow methods. The fast method uses less memory, but in cases where
           there is little free memory, or the heap is fragmented, the slow
           method may work. However, the slow method is much slower. This
           mode defaults to "both", which means that the quick method is
           tried first, and if it fails to allocate the large chunks needed
           for the buffer, it will retry using the slow (small chunk) method.
           Set to "fast" to use only the fast method, and to "slow" for only
           the slow method. (U)

   readonly (ro)
           Prevent writing a buffer to its associated file. Unlike "view"
           mode (see below) which prevents any modifications to a buffer,
           this mode allows changes, but prevents updates. This is set
           automatically for the output of shell commands and pipes. (B)

   readonly-on-readonly (roro)
           Causes "readonly" mode to be set for read-only files. Normally
           vile will attempt to write files whether the operating system will
           allow it or not. This mode should be turned on to truly mimic vi's
           default behavior. (U)

   recordseparator (rs)
           Specify format of files that vile reads and writes. Formats are
              * "auto" (to choose between lf and crlf, override dos mode)
              * "lf" (for Unix),
              * "crlf" (for DOS),
              * "cr" (for Macintosh, overridden by dos mode)
              * and "default" (lf or crlf, depending on the platform).

           When reading from a file, vile can determine the file format
           automatically, and set a local value for this mode. When reading
           from a pipe, it uses the global value of recordseparator to decide
           how to split lines. Files created within vile do not automatically
           have a local recordseparator mode; they inherit the global mode
           setting. The commands

         set-rs-cr
         set-rs-lf or set-unix-mode
         set-rs-crlf or set-dos-mode

           are aliases which set the corresponding local mode values of
           recordseparator. Set the recordseparator on a given buffer to
           control how it is written. (B)

   norectangle-insert-mode (rim)
           Insert, rather than overstrike, change changing text in a
           rectange. (B)

   remap
           Controls whether :map or :map! sequences entered with no explicit
           remapping control should be subject to remapping (i.e. recursive
           mapping). (U)

   remapfirst
           Controls whether the first character of a map expanded due to :map
           or :map! is eligible for remapping. This is off by default for vi
           compatibility. (U)

   report
           A threshold value that is used to control messages that report the
           number of lines deleted, changed, etc. Set it to 0 (zero) to
           disable the messages. (U)

   resolve-links
           Controls whether vile fully resolves file names in cases where
           some path components are symbolic links. This makes vile smarter
           about symbolic links that provide multiple paths to a given file,
           and ensures that files are always represented in vile by their
           "true" names. (This can prevent multiple unintentional edits of
           the same physical file via different pathnames - but see also
           "unique-buffers", below.) It may trigger long timeouts on systems
           where symbolic links are used in conjunction with NFS automounted
           directories. (Note that this does not detect or prevent multiple
           edits caused by hard file links - only symbolic ones.) (U)

   reuse-position
           Like the animated mode, restore the position in a scratch buffer
           when recreating it. This is useful for closely related commands
           such as show-printable and show-wide-printable that use the same
           scratch buffer name.

   ruler
           Shows the current line and column in the status line, as well as
           what percentage of the current buffer's lines lie in front of the
           cursor. (This percentage is different than that given by ^G (the
           "position" function), which gives a percentage of characters
           rather than lines.) (B)

   samebangs (sb)
           Controls whether the ":!!" and "^X-!" commands remember the same
           command string. (U)

   sections
           A regular expression defining where the "next-section" (']') and
           "previous-section" ('[') commands will go. (B)

   sentences
           A regular expression defining where the "next-sentence" (')') and
           "previous-sentence" ('(') commands will go. (B)

   shiftwidth (sw)
           This is much like a tabstop, except that it is independent of
           hardware tabs and tab characters. It is the number of columns a
           line will shift by if the '<<' or '>>' commands are used, and it
           chooses the next column stop for the cursor if a '^T' or '^D' is
           typed during insert mode. Note that when the majormode cmode is
           enabled, shiftwidth assumes the local buffer mode value of 8. (B)

   showchar (sc)
           Controls whether the modeline can show the %C formatted character
           at the current editing position. This is overridden by the ruler
           mode, to save space on the modeline (W).

   showformat (sf)
           Controls when/whether recordseparator information is shown in the
           status line. Values are "always", "differs" to show when the local
           mode differs from the global, "local" to show whenever a local
           mode is set, "foreign" to show when the recordseparator differs
           from the native default and "never". On Unix, the native
           recordseparator is a line-feed, on DOS it is
           carriage-return/line-feed. (B)

   showmatch (sm)
           During insert, if a closing "fence" character (usually '}', ']',
           or ')', but may be changed by setting "fence-pairs") is typed, the
           cursor will highlight the matching member of the pair for about a
           quarter second. (B)

   showmode (smd)
           Causes an indicator on the modeline to indicate what mode vile is
           currently in: insert (I), replace (R), or command (none). (B)

   showram (sr)
           Displays the amount of ram currently allocated at the end of the
           message line. (not in all versions) (U)

   showvariables (sv)
           If set, causes the [Variables] buffer which is created by the
           "show-variables" command to be updated each time the screen is
           updated. (W)

   sideways
           Will prompt for a new value for the sideways scroll offset, which
           allow display of a section of code normally off the screen to the
           right. Also affected by the ^X-^R and ^X-^L commands. (W)

   smoothscroll (ss)
           Force smooth scrolling. By default, this option is turned off so
           that vile will try to keep up with your keystrokes instead of
           keeping the display up to date. Some keyboards repeat faster than
           the screen can keep up causing the screen to jump. If this bothers
           you, set smoothscroll to true. Warning: If your keyboard repeats
           really fast and you have smoothscroll enabled, it may take a while
           for vile to catch up. (U)

   spaces-after-sentence (sas)
           Insert two spaces after each sentence when formatting a paragraph.
           By default this option is turned on. When disabled, the format
           routine will insert only one space after each sentence. (B)

   suffixes (suf)
           A regular expression describing filename suffixes for which the
           corresponding majormode will be set. The expression is applied
           only to the portion of the filename beginning with the first ".".
           If more than one of mode-pathname, mode-filename and suffixes are
           given, they are tested in this order. (M)

   swap-title
           For xvile/winvile, if set, the editor displays its title as:

         <current buffer name> - <editor name>

           The swapped order is especially useful under limited screen real
           estate conditions. (U)

   tabinsert (ti)
           Allow the physical insertion of tab characters into the buffer. If
           turned off ("notabinsert"), and an attempt is made to insert a tab
           character by explicitly typing it or by using shiftwidth or the
           line shifting commands, then the appropriate number of space
           characters will be inserted instead. Use '^V^I' to insert a real
           tab, and remember that pre-existing tabs will not be affected. Use
           the '^A-<SP>' operator command to eliminate pre-existing tabs from
           a region of text. (B)

   tabstop (ts)
           Set the value for spacing of normal tabstops. Note that when the
           majormode cmode is enabled, tabstop assumes the local buffer mode
           value of 8. (B)

   tagignorecase (tc)
           Causes tag searches to be done ignoring upper and lower case. (B)

   taglength (tl)
           Sets the significant length for tags. If non-zero, lookups for
           names longer than the taglength value will only attempt to match
           that many characters. If a lookup is for a shorter pattern, or the
           value of taglength is zero, then the tags must match the lookup
           pattern exactly. This will not effect tags picked up from the
           cursor - they are always matched exactly. (B)

   tagrelative (tr)
           Causes files looked up via the tags mechanism to be found relative
           to the location of the tags file, rather than relative to the
           current directory. This allows the same tags file to be useful
           from different locations, while not requiring absolute filenames.
           For example, using `set tags "tags ../tags"' would allow a single
           tags file (located in the parent) to be used in a small source
           hierarchy from either the parent or a child directory. (B)

   tags
           Gives a path of names of file(s) in which to look up tag
           references. It is a whitespace-separated list of filenames.
           Relative pathnames in this list are evaluated with respect to the
           current directory of vile at the time of the tags lookup. (B)

   tagword (tw)
           When scanning the word to lookup from the cursor position for the
           tags mechanism, grab the whole word rather than the substring
           starting at the cursor position. The latter, which is vi-like, is
           the default. (B)

   terse
           vile produces more "status" messages than vi, which may become
           annoying at low baud rates. Setting terse mode will suppress many
           of these. (B)

   terse-selections (tsel)
           Boolean indicating whether or not additional information is
           displayed about a selection. When false, the starting and ending
           positions of the selection are displayed as the selection is
           extended. The default is true. (W)

   timeoutlen
           How long to wait for the characters of a :map'd sequence.
           Typically needed to resolve the ambiguity between a user-pressed
           ESCape key and an ESC character that is part of a function key
           sequence. vile will wait for "timeoutlen" milliseconds after
           seeing an ESC, in order to check the next character of input. The
           time defaults to 500, or half a second. Users of fast local
           screens, like a local xterm, may wish to reduce this to something
           like 50 for crisper response to a user-pressed ESC. (U)

   timeoutlen-user
           If set non-zero, this will enforce a maximum waiting time for
           characters in a user-defined :map sequence. If zero, the value of
           timeoutlen, above, will be used for both "system" and user
           sequences. It is likely that a short time is desired for system
           sequences, and a long time for user sequences. For this reason the
           default value of timeoutlen-user is 60000. This will give a full
           minute to type each character of a user-defined :map. Be careful -
           extremely large values may overflow the word size on smaller
           machines, i.e, you will probably want to avoid setting
           timeoutlen-user larger than 65535. (U)

   undo-dos-trim (udt)
           Controls whether trimming of carriage returns and control/Z done
           when converting between Unix and DOS line endings is undoable.

   undoable (ua)
           Controls whether changes are saved on the undo stack. This is
           normally enabled, but you may wish to disable it to reduce memory
           overhead when filtering very large files. (B)

   undolimit (ul)
           Sets a limit on how many undoable buffer-changing commands will be
           saved. If set to 0, there is no limit, and all changes are
           undoable. The default value is 10. (B)

   unicode-as-hex (uh)
           If displaying a buffer whose file-encoding says it is one of the
           Unicode flavors, e.g., "utf-8", "utf-16" or "utf-32", show the
           values that are non-ASCII in "\uXXXX" format even if the display
           is capable of showing these as regular characters. (W)

   unique-buffers
           When vile is asked to read a file into a buffer, it will first
           check to be sure that it doesn't already have a copy of that file,
           by the same or a different name. This can prevent multiple
           unintentional edits of a file which appears twice in the
           filesystem due to hard or soft links. On UNIX systems vile uses
           the combination of filesystem device and inode to check for
           uniqueness. vile will represent the file by the first name used to
           refer to it. Note that unless "check-modtime" is also set, a file
           with more than one name which is edited and then replaced on disk
           without the knowledge of the editor may still be edited twice.
           Setting this mode may be a no-op on non-UNIX systems. (U)

   unprintable-as-octal (uo)
           If an 8-bit character is non-printing, it will normally be
           displayed in hexadecimal. This setting will force octal display.
           Non-printing characters whose 8th bit is not set are always
           displayed in control character (e.g. '^C') notation. (W)

   video-attrs
           Overlay all text with the given attribute: bold, italic, reverse,
           underline or none. (U)

   view
           View the file only. No changes are permitted. (B)

   view-on-readonly (viewro)
           Causes "view" mode to be set for read-only files. (U)

   visual-matches
           When a search command is executed, the cursor will move as usual.
           In addition, all matching occurrences of the searched-for pattern
           (in the current buffer) will be emphasized according to the value
           of this mode: "none", "underline", "bold", "italic", or "reverse".
           Additionally, on systems which support color, this mode may be
           used to set the text foreground color using any of the color
           values.

           The '=' command can be used to clear this sort of highlighting,
           until the next search is done for a different pattern. Note that
           setting this mode can significantly slow down the editor's
           operation when complex or frequently occurring patterns are used,
           since vile will need to scan the entire buffer for matches on any
           change to the buffer. (B)

   vtflash
           If your terminal does not support a visual flash feature, but does
           support the DECSCNM control sequences that toggle normal/inverse
           screen video (a feature available with vt100 and later terminals),
           then a visual bell effect may be achieved using this mode.

           +----------------------------------------------------------------+
           | Mode Value | Mode Semantics                                    |
           |------------+---------------------------------------------------|
           | off        | feature disabled (default)                        |
           |------------+---------------------------------------------------|
           | reverse    | on err -> switch screen to normal then reverse    |
           |            | video.                                            |
           |------------+---------------------------------------------------|
           | normal     | on err -> switch screen to reverse then normal    |
           |            | video.                                            |
           +----------------------------------------------------------------+

           As is true with "flash" mode, no audible or visible indication
           will occur at all if "errorbells" mode is not set on. (U)

   warn-blanks
           When prompted for a filename, vile normally allows you to use
           leading and trailing blanks and other nonprinting characters. Set
           this mode if you prefer to be prompted. Vile will then prompt you
           if you want the nonprinting characters to be stripped from the
           given filename. (U)

   warn-rename
           When using ":e" to find a file that has the same name as another
           buffer, vile will normally offer for you to edit the proposed
           alternate name for the buffer constructed by adding a "-1", "-2",
           etc. to the end of the name. Turning off "warn-rename" will make
           vile choose buffer names without user intervention. (U)

   warn-reread
           When using ":e!" to reread a buffer from the file on disk, vile
           will normally warn you that you are about to clobber a modified
           buffer. Turning off "warn-reread" mode will make vile assume you
           know what you are doing. (U)

   warn-unread
           When leaving the editor, if not all buffers have been "visited",
           then normally vile will complain, and remind the user to use
           ":q!". Turning off "warn-unread" mode will suppress this behavior.
           (U)

   working
           If turned off (noworking), will suppress the activity indicator
           ("working..."/"...working") which appears during long-running
           operations. (U)

   wrapmargin (wm)
           Implements vi's auto-wrap mode. vile computes the effective margin
           from the mode's value:
              * if positive, the wrapmargin specifies the number of columns
                on the screen's right margin to reserve before breaking the
                input lines on a preceding space.
              * if negative, vile counts from the left margin.
              * if zero (default), this mode is inactive.

           A value of 5 and an 80 column screen will result in 75 character
           lines. This mode is different from the "wrapwords" mode (below)
           which uses the "fillcol" setting as its target column. The two
           modes probably should not both be used at once. (B)

   wrapscan (ws)
           Text searches will continue from past the bottom of the file to
           the top, and vice-versa. (B)

   wrapwords (ww)
           Similar to, but different from, vi's auto-wrap mode (i.e.
           "wrapmargin"). While inserting, words are moved to the next line
           if the current line gets too long. Wrapping is only attempted when
           a space is typed. The target maximum width of lines is changed
           with the "fillcol" setting. (B)

   xterm-fkeys
           Support xterm's modified function keys by generating system
           bindings for the shift-, control-, alt-modifiers of each function
           key listed in the terminal description.

   xterm-mouse
           Enables mouse-clicking if you are running within an xterm. That
           is, it allows vile to receive mouse events. Since this mode
           overrides xterm's cut & paste, you will need to use the Shift key
           when pressing the mouse buttons to cut and paste between X
           windows. Your TERM variable's termcap entry should contain the
           string "xterm" for this to work. (U)

   xterm-title
           Enables titlebar updates if you are running within an xterm. Each
           time you switch to a different buffer, vile can update the title.
           This uses the same tests of the TERM variable as the xterm-mouse
           mode. (U)

   yankmotion (ym)
           Yanking text will cause cursor movement (just like vi) if the
           motion is left or up. (B)

8-Bit Operation

   vile allows input, manipulation, and display of all 256 possible byte-wide
   characters. Wide characters are supported, depending on the device type
   and your locale settings.

  Output

   By default, 8-bit characters with the high bit set (decimal value 128 or
   greater) will display as hexadecimal (or octal; see "unprintable-as-octal"
   above) sequences, e.g. \xA5. A range of characters which should display as
   themselves (that is, characters understood by the user's display terminal)
   may be given using the "printing-low" and "printing-high" settings (see
   above). Useful values for these settings are 160 and 255, which correspond
   to the printable range of the ISO-Latin-1 character set.

   If your locale (e.g., the LANG or LC_CTYPE environment variable on a POSIX
   platform) is configured properly, the "printing-low" and "printing-high"
   settings are not needed. vile initializes its character type tables based
   on the system. You can make finer adjustments to those tables as described
   in "Character Classes".

   If your terminal (and locale) are set up to support UTF-8, vile can
   display files which use that encoding. It can also display UTF-16 and
   UTF-32 files using UTF-8. When the terminal/locale do not support UTF-8
   vile displays the wide characters as hexadecimal codes, e.g., \u1234. Even
   when vile can display wide characters, you can force it to display the
   hexadecimal codes with the "unicode-as-hex" mode.

   See UTF-8 Support versus Driver in config.doc for an overview of the
   terminal drivers.

   If your terminal and locale are not set up to support UTF-8, vile displays
   UTF-8 codes that would map to Latin-1 (8-bit) values with a "\?" rather
   than "\x" prefix, to distinguish them from ordinary 8-bit values. It will
   also display this form for bytes found in UTF-8 files that cannot be
   decoded as UTF-8.

  Input

   There are basically three ways of getting 8-bit characters into a vile
   buffer:

   Directly -
           if the user's input device (i.e. the terminal or xterm) can
           generate all characters, and if the terminal settings are such
           that these characters pass through unmolested, then vile will
           happily incorporate them into the user's text, or act on them if
           they are bound to functions. On an xterm, try "stty cs8 -parenb
           -istrip". Real serial lines may take more convincing, at both
           ends, but use that stty command as a starting point.

           If you start vile in a locale that uses UTF-8 encoding, vile will
           check if there is a corresponding 8-bit encoding by stripping the
           UTF-8 suffix from the locale name, e.g., "en_US.UTF-8" to "en_US".
           When reading characters from the keyboard, it will map 8-bit codes
           to the 8-bit locale when editing a buffer whose file-encoding is
           "8bit" or "ascii".

   As numbers -
           the ^V prefix (or, more correctly, the key bound to the
           "quote-next-character" function), if followed by up to three
           digits, will insert a character whose value is that number (no
           greater than 255) into the buffer. The number may be entered in
              * decimal (^VNNN),
              * octal with a leading '0' (^V0NNN) or
              * hexadecimal with a leading 'x' (^VxNN).

           Wide (Unicode) values can be entered in a similar fashion, though
           they are stored as more than one byte:

              * Unicode hexadecimal with a leading 'u' (^VuNNNN).
              * Unicode decimal with a leading 'U' (^VuNNNN).

           If the current buffer's "file-encoding" mode is set to one of the
           Unicode flavors (utf-8, utf-16 or utf-32), vile will display the
           value as a wide character. Otherwise it will show the bytes of the
           corresponding UTF-8 encoding.

   As digraphs -
           Perhaps more useful to some people is using a set of ":map!"
           commands to aid insertion of 8-bit text. The file "digraphs.rc"
           distributed with the vile source contains a set of mappings which
           should aid the input of ISO 8859/1 text. As examples, the mappings
           in digraphs.rc allow one to type ^KU" or ^Ku" to get an umlaut
           character, ^K12 to get the little '1/2' symbol, ^KY- to get the
           Yen currency symbol, or ^K:- to get an arithmetic division symbol.

   Users who have no need to enter 8-bit text may want access to the
   meta-bound functions while in insert mode as well as command mode. The
   mode "meta-insert-bindings" controls whether functions bound to meta- keys
   (characters with the high bit set) are executed only in command mode, or
   in both command and insert modes. In either case, if a character is _not_
   bound to a function, then it will be self-inserting when in insert mode.
   (To bind to a meta key in the .vilerc file, one may specify it as itself,
   or in hexadecimal or octal, or with the shorthand 'M-c' where c is the
   corresponding character without the high bit set.

   (Although it is possible to edit and view all 256 characters, it is
   currently impossible to _search_ for a string that contains the NULL
   character, since this is used internally to terminate the search string.)


Command History
---------------
   You may scroll through the list of previous replies to the :-prompt by
   using the up- or down-arrow special keys on your keyboard (if your
   configuration supports it).

   Vile prompts for commands in parts, and stores a copy of the complete
   command in the [History] buffer. For example, you may type

         :g/help/p

   and vile will prompt for the parts after each delimiter, e.g.,

         global pattern: help
         action to perform on each matching line: p

   The [History] buffer, shown with "show-history" will store

         g/help/p

   At each prompt, using the up/down arrows will tell vile to display the
   corresponding result for the "same" command. If [History] contains

         g/take/g
         g/help/p

   then the up/down arrows will show "take" or "help", skipping commands
   which do not begin with "g/".


Editing the Minibuffer
----------------------
   The minibuffer (i.e., the last line on the screen, aka the :-prompt) can
   be edited using arrow keys, the delete character, or by toggling to
   vi-mode with the ^G (mini-edit) character. In mini-edit mode, you may use
   commands that do not move the cursor to a different line, as well as the
   following editing commands: i, a, I, A.

   Vile treats the minibuffer specially. Completed lines are written to the
   history buffer. When scrolling up/down in the command history, vile
   displays the data that correspond to the command which you have entered,
   e.g., a :set command will display the variables entered for preceding :set
   commands.


Special Character Expansion
---------------------------
   As in vi, the % and # characters typed while responding to a prompt will
   expand to the current or "alternate" filename.

   Also as in vi, the ~ character will expand to be the previous replacement
   pattern when entering either a replacement or search pattern,

   In addition, the colon character (":") expands at most prompts to be the
   identifier name under the cursor.

   Expansion of ! to the last command run is implemented, but only when a
   shell command is being entered.

   Any of these expansions can be suppressed by prefixing with a '\'.


Character Classes
-----------------
   The "show-printable" command shows a table of the characters and their
   classes, e.g., printable, punctuation, etc.

   You may modify the characters in (or corresponding to) the narrow local in
   this table by setting or unsetting a given class for a range of
   characters. The commands which do this are "set-char-class" and
   "delete-char-class" or "unset-char-class".

   These commands expect the class name and a regular expression which
   defines a range of characters. The class names (short to allow
   "show-printable" to show everything in 80 columns) are

   +------------------------------------------------------------------------+
   | Short          | Long Description                                      |
   |----------------+-------------------------------------------------------|
   | arg            | ex-style line range: 1,$ or 13,15 or % etc.           |
   |----------------+-------------------------------------------------------|
   | ctl            | [:cntrl:] control character                           |
   |----------------+-------------------------------------------------------|
   | del            | delete/backspace                                      |
   |----------------+-------------------------------------------------------|
   | fn             | fence character, e.g., "{" or "}"                     |
   |----------------+-------------------------------------------------------|
   | id             | [:ident:] normal identifier, used for word boundaries |
   |----------------+-------------------------------------------------------|
   | lwr            | [:lower:] lowercase, e.g., "a"                        |
   |----------------+-------------------------------------------------------|
   | nsp            | [:graph:] nonspace                                    |
   |----------------+-------------------------------------------------------|
   | num            | [:digit:] digit, e.g., "0"                            |
   |----------------+-------------------------------------------------------|
   | path           | [:file:] file/path name                               |
   |----------------+-------------------------------------------------------|
   | prn            | [:print:] printable                                   |
   |----------------+-------------------------------------------------------|
   | pun            | [:punct:] punctuation                                 |
   |----------------+-------------------------------------------------------|
   | qid            | qualified identifiers, used in tags parsing           |
   |----------------+-------------------------------------------------------|
   | sh             | may appear in shell/pipe                              |
   |----------------+-------------------------------------------------------|
   | sp             | [:blank:] space                                       |
   |----------------+-------------------------------------------------------|
   | tmp            | legal in scratch-buffer names                         |
   |----------------+-------------------------------------------------------|
   | upr            | [:upper:] uppercase, e.g., "A"                        |
   |----------------+-------------------------------------------------------|
   | wld            | shell wildcard, e.g., "*"                             |
   +------------------------------------------------------------------------+

   You can also reset the table to its initial state using
   "reset-char-classes".


Key Rebinding
-------------
   There is a key rebinding facility (if vile is built to include it), which
   is invoked as follows. One must know the "english" name for the command
   being rebound. Use ":show-commands" or ":apropos string" to find english
   names containing "string". Then use the command:

     :bind-key <englishname> <keyseq>

   where keyseq is the exact keyboard sequence (i.e. single character, or
   '^X', '^A', or '#' followed by a single character) to which the command
   should be bound. In a .vilerc file, keyseq can be either the literal
   sequence, or the printable representation of the sequence, e.g. ^A-a or
   ^X-S. (A summary of how key-sequences can be represented appears at the
   end of this section.)

   For configurations that permit it (X and win32, not termcap/terminfo), you
   may also specify a key modifier, i.e., "alt+", "ctrl+" or "shift+". The
   modifier follows the ^A or ^X prefix, e.g.,

         shift+#6

   for shifted function-key 6.

   Commands can also be bound to meta keys, which are regular ASCII
   characters with the eighth bit (0x80) bit set. The "printable" form for
   these keys is 'M-c'.

   Commands bound to '#-c' or 'FN-c' key sequences are usually also available
   by using the function keys on the terminal. Thus the up-arrow function key
   can be bound to as '#-A' or 'FN-A'. Use show-key-names to see a complete
   list of these key sequences.

   Even the ^A and ^X prefix characters can be rebound, using the dummy
   functions "cntl_a-prefix" and "cntl_x-prefix", and the '#' key itself can
   be rebound - it is represented by the command name "function-prefix".

   Examples: To cause the / and ? commands to perform incremental searches,
   use:

     bind-key incremental-search /
     bind-key reverse-incremental-search ?

   To make ^N and ^P switch windows instead of cause motion by lines, try:

     bind-key next-window ^N
     bind-key previous-window ^P

   To cause the space bar to move forward by pages, as in the "more" command,
   use:

     bind-key next-page \s

   (Space and tab can be represented with: "\s" and "\t".)

   Note that when interactive, ^A and ^X are typed using the control key. In
   a file, however, they can be either a caret (^) followed by a letter, or
   the literal control key. In the latter case you would not use the '-'
   separator. So ^A-x as four distinct characters could also be entered as
   ^Ax, which would only be two characters.

   Characters can be entered in hexadecimal or octal as well, in the form
   0xNN, where NN is exactly two hexadecimal digits. If you know the
   hexadecimal value for a key, you can bind to it like:

     bind-key next-window ^A-\x14

   or

     bind-key next-window #-\213

   The sequence 'M-', represents a "meta-key", or a "meta" character. It is
   equivalent to setting the high bit of the following character, so 'M-e' is
   has the value of (0x80|0x65), or 0xe5.

  Insert mode:

   Function and meta-key bindings are available in insert mode, as well as in
   command mode. (But only via either the "meta bit" or 'FN' sequence form -
   the '#' prefix will not work in insert mode.) There are four key binding
   tables:

   default -
           for commands in screen mode as well as those that do not fit
           naturally into one of the specialized modes. This is initialized
           by compiled-in definitions for normal (0-127) and special
           (function and meta-key) definitions.

         bind-key
         describe-all-keys
         describe-bindings
         describe-key
         unbind-key

   cmdmode -
           for command editing. This is initialized with the special keys
           from the default table, as well as the control characters that are
           associated with movement, e.g., ^N and ^P.

         bind-cmdmode-key
         describe-all-cmdmode-keys
         describe-cmdmode-key
         show-cmdmode-bindings
         unbind-cmdmode-key

   insmode -
           for insertion. This is initialized with the special keys from the
           default table, as well as the control characters that are
           associated with movement, e.g., ^N and ^P. The insert-exec mode
           controls whether those control characters are interpreted or
           inserted.

         bind-insmode-key
         describe-all-insmode-keys
         describe-insmode-bindings
         describe-insmode-key
         unbind-insmode-key

   selmode -
           for selection highlighting, i.e., multimotion. This is initially
           the same as the default binding table, but may be customized.

         bind-selmode-key
         describe-all-selmode-keys
         describe-selmode-bindings
         describe-selmode-key
         unbind-selmode-key

   The "describe-all-*keys" commands differ from the display-commands in each
   group. They show for each of the 256 character codes which normal
   (unmodified) or ^A/^X (modified) keys are bound to a given function. Use a
   repeat count before those commands to show data for all 256 codes.

   The following macro will work correctly in both command and insert modes.
   Note that you must specify the insert mode (insmode) binding separately;
   default bindings are not inherited automatically because they may conflict
   with the bindings used for exiting or modifying text within insert mode.

     store-procedure begin-errtext
             insert-string "fprintf(stderr, \""
             set-named-mark z
             insert-string "\\n\");\n"
             goto-named-mark-exact z
             ; enter insert mode if we weren't already there
             ~if &seq $mode "command"
                     insert-chars
             ~endif
     ~endm
     ; bind to function key 5
     bind-key begin-errtext FN-5
     bind-insmode-key begin-errtext FN-5
     ; also bind to meta-A
     bind-key begin-errtext M-A
     bind-insmode-key begin-errtext M-A

   Actually the "meta-insert-bindings" setting controls whether meta- keys
   will have their bound effect when in insert mode. If this setting is not
   on (or if the meta-key is not bound to any function) then the key's value
   will simply be inserted into the buffer.

  Syntax for key-sequences:

   To summarize, a key-sequence being bound to is specified with:

    1. an optional prefix, like this:

       ^A- (three chars)
       ^X- (three chars)
       ^A (one char)
       ^X (one char)

    2. followed by an optional "function" prefix:

       #- (two chars) or
       FN- (three chars)

    3. followed by an optional "meta" prefix:

       M- (two chars)
       (this is the same as with specifying a character in that has the high
       bit set)

    4. followed by a character, like this:

       C (one char)
       ^C (one char)
       ^C (two chars)
       \NNN (max of four chars, where NNN are octal digits)
       \xNN (max of four chars, where NN are hex digits)
       \n,\r,\t,\b,\f,\a (two chars each, usual meanings)
       \e (two chars, means ESC)
       \s (two chars, means SPACE)

   (The "one char" control character entries in the above table are
   represented in this help file as two printable characters, to ensure they
   are not deleted by mailers or file transfer programs.)

  Function Keys

   When you bind to a function key, you will see its value printed as a
   'poundsign' sequence. And, if you wish to :map a function key, you will
   need to use its poundsign sequence. This is explained more fully below.

   The list of function key labels, along with their "vile name", are as
   follows:

   +------------------------------------------------------------------------+
   | Usual Label      | Vile name       | Usual Label      | Vile name      |
   |------------------+-----------------+------------------+----------------|
   | Up-arrow         | #A              | Home             | #H             |
   |------------------+-----------------+------------------+----------------|
   | Down-arrow       | #B              | End              | #E             |
   |------------------+-----------------+------------------+----------------|
   | Left-arrow       | #D              | Insert           | #i             |
   |------------------+-----------------+------------------+----------------|
   | Right-arrow      | #C              | Delete           | #d             |
   |------------------+-----------------+------------------+----------------|
   | Prior (PageUp)   | #p              | Find             | #f             |
   |------------------+-----------------+------------------+----------------|
   | Next (PageDown)  | #n              | Select           | #s             |
   |------------------+-----------------+------------------+----------------|
   | Help             | #?              | Menu             | #m             |
   |------------------+-----------------+------------------+----------------|
   | F1               | #1              | F12              | #@             |
   |------------------+-----------------+------------------+----------------|
   | F2               | #2              | F13              | ##             |
   |------------------+-----------------+------------------+----------------|
   | F3               | #3              | F14              | #$             |
   |------------------+-----------------+------------------+----------------|
   | F4               | #4              | F15              | #%             |
   |------------------+-----------------+------------------+----------------|
   | F5               | #5              | F16              | #^             |
   |------------------+-----------------+------------------+----------------|
   | F6               | #6              | F17              | #&             |
   |------------------+-----------------+------------------+----------------|
   | F7               | #7              | F18              | #*             |
   |------------------+-----------------+------------------+----------------|
   | F8               | #8              | F19              | #(             |
   |------------------+-----------------+------------------+----------------|
   | F9               | #9              | F20              | #)             |
   |------------------+-----------------+------------------+----------------|
   | F10              | #0              | F11              | #!             |
   |------------------+-----------------+------------------+----------------|
   | KeyPad_F1        | #P              | KeyPad_F3        | #R             |
   |------------------+-----------------+------------------+----------------|
   | KeyPad_F2        | #Q              | KeyPad_F4        | #S             |
   +------------------------------------------------------------------------+

   In addition, #M, #t, and #T are used internally to support mouse
   operations in an xterm. To undo the relationship between a
   "system-defined" function key and the poundsign sequence it produces, use
   ":unmap-system-chars".

  :map, :map!, :noremap, :noremap!

   The vi "map" and "map!" commands are implemented in vile. As in vi,
   mapping works best if the character sequence being bound corresponds to
   pressing a single key. Multiple key sequences will work as long as the
   next key in the sequence is pressed within a specified number of
   milliseconds. The value of "timeoutlen" is used for system-defined
   character sequences, i.e. function keys. User defined sequences will use
   this too, unless the value of "timeoutlen-user" is non-zero, in which case
   this value will be used instead.

   Because "map" and "map!" may be used to remap arbitrary sequences, these
   sequences must be entered literally, i.e, the syntax for key sequences as
   listed above will not work for "map" and "map!". To enter control
   characters into a .vilerc file, use the ^V escaping mechanism. A map
   command entered from the command line will require fewer characters be
   escaped with ^V.

   To provide a relatively portable way of specifying function key mappings,
   vile will reapply mapping to the result of a system- defined map. System
   function keys are mapped to "poundsign" sequences, like '#1' for function
   key 1, and '#B' for the down-arrow key. The remapping allows one to put

     map #1 <some-user-map-sequence>

   in the .vilerc file, and have the user-sequence executed when the system
   F1 key is pressed. (Otherwise the terminal-specific sequence would have to
   appear in the .vilerc.) See the section on "Function Keys" above for a
   full list.

   The "remap" option controls whether the successfully mapped result of a
   map is reevaluated for more mapping matches. The "noremap" (and
   "noremap!") variants of the map commands will force that particular
   mapping to be applied without subsequent remapping, regardless of the
   current setting of the global "remap" setting.

   Since key sequences starting the '^X', '^A', or '#' prefixes are normally
   expected to act as a unit, no remapping is done on characters that follow
   such prefixes. For instance, this keeps a map like:

     :map h ihello<ESC>

   from breaking the '^X-h' command.

   Long running loops caused by recursive :map definitions are detected and
   assumed to be infinite. When such a loop is detected, execution is
   aborted. Turning off the "remap" option, or doing some of the maps with
   the ":noremap/:noremap!" form of the map commands will eliminate most such
   loops.

   vile normally duplicates real vi's behavior (but not vim's) in that the
   first character of the sequence being mapped to is not subject to
   recursive (map) evaluation. Assuming "remap" is on, pressing 'j' when
   ":map j jh" is in effect will not cause an infinite loop, whereas ":map j
   hj" _will_ cause such a loop. Setting the "remapfirst" option will allow
   this sort of remapping (and will cause an infinite loops for both
   examples).

   The "maplonger" option controls whether the longer or shorter of two
   "nested" map strings will be favored by the editor. That is, if both "foo"
   and "foobar" are mapped (to presumably different values), then with
   "maplonger" set, vile will not expand "foo" until it is sure (either
   because the next character is not 'b', or a timeout has expired) that
   "foobar" will not be seen. Real vi will always expand "foo" immediately,
   and this is the default behavior. Though not particularly recommended, the
   "maplonger" mechanism even permits the following types of mappings:

     :map z j
     :map zz k

   When 'z' is pressed by itself it will cause vile to move down one line
   (assuming j has not been rebound or remapped). But if 'z' is pressed twice
   rapidly (enough) in succession, vile will move to the previous line.

   The left hand side of a map[!] definition may contain the usual backslash
   escapes: \n, \r, \t, \b, \f, \a (^G), \e (ESC), \s (SPACE), \xNN
   (hexadecimal), \NNN (octal). The right hand side is taken exactly
   literally, so special characters must be expressed as themselves.

   The current set of mappings or "map!"ings may be viewed with the commands
   ":map<cr>" (or ":show-mapped-chars") or ":map!<cr>" (or
   ":show-mapped!-chars").

   The system-defined maps, representing the function keys, may be shown with
   ":show-system-mapped-chars".

   To undo a mapping, use "unmap", "unmap!", or "unmap-system-chars".

  :abbr

   The "abbr" command is also present in vile. It is similar to, but slightly
   different than, "map!". Whereas "map!" examines characters as they are
   typed, continuously looking for a match against the stored translation
   strings, the "abbr" command examines them after they are already in the
   buffer, and is more sensitive to their surrounding context.

   First, abbreviations are never expanded unless followed by non-"word"
   characters. In addition, abbreviations which begin like a "word" (i.e.
   with letters, digits, or the '_' character) are not expanded if they
   immediately follow another "word" character - they must follow whitespace
   or punctuation or the beginning of the line. Likewise, abbreviations that
   begin with a punctuation character are not detected within more
   punctuation - they must follow whitespace or a "word", or the beginning of
   the line.

   If the "backspacelimit" setting is set (and it is, by default), then
   characters not inserted during the current insertion command are not
   considered in the above comparisons - the start of the current insertion
   behaves much like the beginning of line in that case.

   Abbreviations are never recursive.

   vile is more lenient than vi regarding what is a valid abbreviation. vi
   insists that an abbreviation be all "word" characters, or be all
   "non-word" characters, except for the last character, which _must_ be a
   "word" character. vile allows anything at all to be abbreviated, only
   enforcing the expansion rules mentioned above.

   To undo an abbreviation, use "unabbreviate".


Special "Terminal" Key Rebinding
--------------------------------
   In addition to the above binding mechanism for vile commands, other
   keystrokes to the editor are rebindable using the "set-terminal" command.
   These keystrokes are mostly derived directly from the user's tty settings
   on entering the editor, but there are a couple of additions related to
   command and filename completion.

   The values of these characters can be shown with the "show-terminal"
   command, and can be changed with the "set-terminal" command.

   +------------------------------------------------------+
   | Name             | Default value     | Typical value |
   |------------------+-------------------+---------------|
   | backspace        | from tty settings | (DEL or ^H)   |
   |------------------+-------------------+---------------|
   | interrupt        | from tty settings | (^C or DEL)   |
   |------------------+-------------------+---------------|
   | line-kill        | from tty settings | (^U or @)     |
   |------------------+-------------------+---------------|
   | mini-edit        | (^G)              |               |
   |------------------+-------------------|               |
   | name-complete    | <tab>             |               |
   |------------------+-------------------+---------------|
   | quote-next       | from tty settings | (^V)          |
   |------------------+-------------------+---------------|
   | start-output     | from tty settings | (^Q)          |
   |------------------+-------------------+---------------|
   | stop-output      | from tty settings | (^S)          |
   |------------------+-------------------+---------------|
   | suspend          | from tty settings | (^Z)          |
   |------------------+-------------------+---------------|
   | test-completions | ?                 |               |
   |------------------+-------------------+---------------|
   | word-kill        | from tty settings | (^W)          |
   +------------------------------------------------------+


Flow-control
------------
   Historically, the flow of data between the computing host and the user's
   terminal was throttled through the use of special characters in the input
   stream, known as XON and XOFF (whose values are ^Q and ^S respectively).
   Most modern systems do not need these characters, and regulate the flow in
   an "out-of-band" manner. The terminal device driver, however, is usually
   still set up with software flow control enabled, to allow the user to
   manually start and stop output with the ^S and ^Q characters.

   vile normally resets the driver to allow the ^S and ^Q characters to be
   bound to commands, since most systems no longer need software flow
   control, and since there is usually no reason for a user to wish to
   suspend output when running vile. Some older devices (usually older slower
   terminals), however, still need to be able to automatically control the
   data flow by generating ^S/^Q without the user's intervention.

   To accommodate these situations, the "flow-control-enable" command will
   reset the terminal driver to its original state. Software flow-control
   will be re-enabled, and commands bound only to the ^S and ^Q characters
   will be inaccessible. The characters affected in this way may be seen with
   the "show-terminal-chars" command, where they will appear as the
   "start/stop-output" characters. The action of the "flow-control-enable"
   command will be reversed if it is given any argument.


Recorded macros
---------------
   The first type of macro in vile is for temporary, quick macro usage, and
   lets you record a set of keystrokes as you execute vile commands. You can
   then replay those keystrokes with a single key.

   ^X-(

   ^X-)
           Begin or end the recording a keyboard macro. The keystrokes you
           type are recorded. For compatibility with previous versions of
           vile (where separate commands were necessary), these two commands
           are now both bound to the same function. The start/stop capability
           is now a toggle, and requires only one command.

   ^X-&
           Execute the keyboard macro.

   ^X-^
           Copy recorded keyboard macro to a named register, for saving, or
           for execution using '@a', as below. (Type "a^X^, where "a means
           yank into register-a)

   The vi '@' command is present as well, and can be used to execute the
   contents of a named register as if it were entered at the keyboard. To
   make this more useful, the "load-register" command will allow preloading a
   named register, from .vilerc file. For example:

     use-register a load-register ihello^[

   will load register 'a' with a command to insert the word "hello". (The ^[
   should be a real ESC character, entered by preceding it with ^V.) A better
   example, is this:

     use-register w load-register ":!chmod +w %^M:w^M"

   which makes the current file writable and writes it. (Again, use ^V to get
   the CR characters into the .vilerc file.)


Programmed procedures (aka macros)
----------------------------------
   [ Note 1: the information presented in this section of the help file is a
   subset of "doc/macros.doc", which is supplied with the vile source code.
   macros.doc is the authoritative reference manual for the editor's macro
   language.

   Note 2: the language features/directives described below are not limited
   solely to use within macros. These directives are often used within a
   startup/command file to configure the editor, load registers, etc. ]

   vile can also be extended by defining macros and optionally binding the
   execution of those macros to key sequences. For instance, if the following
   lines appear in a .vilerc file:

     1 store-macro
             5 delete-til next-word
     ~endm
     bind-key execute-macro-1 ^A-1

   then when ^A-1 is executed, 5 words will be deleted. The "-til" suffix on
   an englishname denotes that it is a vi operator style command, and expects
   to be followed by a motion command. Also,

     1 store-macro
             5 delete-til lines
     ~endm

   would be the equivalent of "5dd" since the word "lines" represents the
   stuttered 'dd' style of operation. More examples are given throughout this
   help file.

   Macros come in two flavors: named and numbered. The syntax and advantages
   of each format are discussed next.

  Numbered macros

   The numbered macro syntax looks like so:

     <number> store-macro
             <language element>
             ...
             <language element>
     ~endm

   A numbered macro is executed using this command:

     execute-macro-<number>

   To bind a keystroke to this macro, use this command:

     bind-key execute-macro-<number> <keystroke>

   The only advantage of numbered macros over named macros is that the former
   do not share the same namespace as vile's commands. This attribute can be
   advantageous when creating macros recalled solely via key bindings.

   Note that numbered macros are allocated from a fixed pool (default is 40
   macros). This fixed limit can be changed during the editor's
   configuration. Given their fixed allocation and the fact that their
   strictly numeric "names" don't facilitate easy recall, numbered macros are
   not used that much anymore.

  Named macros

   A named macro, aka "stored procedure", uses this syntax:

     store-procedure <unique-name>
             <language element>
             ...
             <language element>
     ~endm

   where:

   unique-name
           is an alpha-numeric identifier that does not conflict with the
           name of any existing editor command (the show-commands command
           generates a list of all existing commands).

   A stored procedure is executed by simply referencing its name. To bind a
   keystroke to this macro, use this command:

     bind-key <unique-name> <keystroke>

   Here's a trivial example:

     store-procedure write-msg-tst
             write-message "this is a test macro"
     ~endm
     bind-key write-msg-tst #h

   Two mechanisms now exist for executing this macro:

     * press "#h" within the editor, or
     * simply use the name "write-msg-tst" as if it were any other built-in
       editor command. This means that "write-msg-tst" can be invoked from
       another macro, from a startup/configuration file, or from vile's
       command line, like so:

         :write-msg-tst

   Note that named macros may also include parameters and a help string, each
   of which are described in doc/macros.doc.

  User-defined Operators

   These are defined using the store-operator command, and accept no
   arguments. Otherwise they are much like other named macros. These macros
   setup parameters and perform special processing wrapped around one of
   vile's built-in operators. Here is an example:

     store-operator fmt
             $cmd-count filter-til $cmd-motion 'fmt -w50 -'
     ~endm

   In the example, the combination of $cmd-count and $cmd-motion (passed into
   the macro) act as the "real" operator's associated motion.

  Macro Language Elements

   Macros may incorporate any of the editor's built-in commands, directives
   (e.g., ~if, ~else), any previously defined named or numbered macro,
   functions (e.g., &error, &sequal), and variables.

  Variables

   There are some built-in variables that can be used in macros to gain
   access to parts of vile status, and parts of the current buffer. Built-in
   variables are accessed by name, prefixed with the '$' character. There are
   two types of built-in variables (the so-called "state" variables, and mode
   values). The state variables are: shown in the table below.

   You can also show a summary using the "describe-state-variables" command:

   +------------------------------------------------------------------------+
   | Name                | Description                                      |
   |---------------------+--------------------------------------------------|
   | $_                  | most-recent macro $return value                  |
   |---------------------+--------------------------------------------------|
   | $abufname           | alternate buffer name (i.e. last visited) (read  |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $autocolor-hook     | name of the hook that runs when autocolor is     |
   |                     | enabled                                          |
   |---------------------+--------------------------------------------------|
   | $bchars             | number of characters in current buffer (read     |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $bchanged           | true if current buffer is modified (boolean)     |
   |---------------------+--------------------------------------------------|
   |                     | status flags for current buffer (read only)      |
   |                     |                                                  |
   |                     | +----------------------------------------------+ |
   |                     | | Flag | Description                           | |
   |                     | |------+---------------------------------------| |
   |                     | | a    | autobuffer caused this to be created  | |
   |                     | |------+---------------------------------------| |
   |                     | | d    | directory listing                     | |
   | $bflags             | |------+---------------------------------------| |
   |                     | | i    | invisible, e.g., tags                 | |
   |                     | |------+---------------------------------------| |
   |                     | | m    | modified                              | |
   |                     | |------+---------------------------------------| |
   |                     | | s    | scratch, will be removed when popped  | |
   |                     | |      | down                                  | |
   |                     | |------+---------------------------------------| |
   |                     | | u    | unread                                | |
   |                     | +----------------------------------------------+ |
   |---------------------+--------------------------------------------------|
   | $blines             | number of lines in current buffer (read only)    |
   |---------------------+--------------------------------------------------|
   | $brightness         | RGB levels for gray, normal, bright in the 0-255 |
   |                     | range (winvile version only)                     |
   |---------------------+--------------------------------------------------|
   | $buf-fname-expr     | combined buffer+fname expression (read only)     |
   |---------------------+--------------------------------------------------|
   | $buffer-hook        | name of procedure to run when switching to a     |
   |                     | buffer                                           |
   |---------------------+--------------------------------------------------|
   | $bufname            | current buffer-name under the cursor.            |
   |---------------------+--------------------------------------------------|
   | $bwindows           | number of windows open on current buffer(read    |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $cbufname           | current buffer name                              |
   |---------------------+--------------------------------------------------|
   | $cdpath             | editor's copy of the $CDPATH env var             |
   |                     | (read/write)                                     |
   |---------------------+--------------------------------------------------|
   | $cd-hook            | name of procedure to run when changing           |
   |                     | directories                                      |
   |---------------------+--------------------------------------------------|
   |                     | comma-delimited list of "interesting" compiled   |
   |                     | options (read only).                             |
   |                     |                                                  |
   |                     | +----------------------------------------------+ |
   |                     | | Name      | Description                      | |
   |                     | |-----------+----------------------------------| |
   |                     | | ansi      | vile built with ANSI terminal    | |
   |                     | |           | driver                           | |
   |                     | |-----------+----------------------------------| |
   |                     | | athena    | xvile built with Athena widgets  | |
   |                     | |-----------+----------------------------------| |
   |                     | | borland   | vile built with Borland/DJGPP    | |
   |                     | |           | driver                           | |
   |                     | |-----------+----------------------------------| |
   |                     | | curses    | editor uses curses terminal      | |
   |                     | |           | driver                           | |
   |                     | |-----------+----------------------------------| |
   |                     | | hypertext | editor supports highlighting and | |
   |                     | |           | links                            | |
   |                     | |-----------+----------------------------------| |
   |                     | | iconv     | editor has iconv locale support  | |
   |                     | |-----------+----------------------------------| |
   |                     | | locale    | editor uses system's LC_CTYPE    | |
   |                     | |           | locale                           | |
   |                     | |-----------+----------------------------------| |
   |                     | | motif     | xvile built with Motif libraries | |
   |                     | |-----------+----------------------------------| |
   |                     | | multibyte | vile built with multibyte        | |
   |                     | |           | locales                          | |
   |                     | |-----------+----------------------------------| |
   | $cfgopts            | | nextaw    | xvile built with Athena widgets  | |
   |                     | |           | (NeXtaw)                         | |
   |                     | |-----------+----------------------------------| |
   |                     | | ntcons    | vile built for Win32 console     | |
   |                     | |-----------+----------------------------------| |
   |                     | | ntwin     | vile built for Win32 GUI         | |
   |                     | |-----------+----------------------------------| |
   |                     | | noshell   | shell commands are disabled      | |
   |                     | |-----------+----------------------------------| |
   |                     | | oleauto   | editor supports OLE automation.  | |
   |                     | |-----------+----------------------------------| |
   |                     | | openlook  | xvile built with OpenLook        | |
   |                     | |           | libraries                        | |
   |                     | |-----------+----------------------------------| |
   |                     | | os2vio    | vile built for OS/2 VIO console  | |
   |                     | |-----------+----------------------------------| |
   |                     | | perl      | editor includes perl interpreter | |
   |                     | |-----------+----------------------------------| |
   |                     | | termcap   | editor reads TERMCAP db for      | |
   |                     | |           | screen info.                     | |
   |                     | |-----------+----------------------------------| |
   |                     | | terminfo  | editor reads TERMINFO db for     | |
   |                     | |           | screen info.                     | |
   |                     | |-----------+----------------------------------| |
   |                     | | vmsvt     | vile built for VMS terminal      | |
   |                     | |-----------+----------------------------------| |
   |                     | | xaw       | xvile built with Athena widgets  | |
   |                     | |           | (Xaw)                            | |
   |                     | |-----------+----------------------------------| |
   |                     | | xaw3d     | xvile built with Athena widgets  | |
   |                     | |           | (Xaw3D)                          | |
   |                     | +----------------------------------------------+ |
   |---------------------+--------------------------------------------------|
   | $cfilname           | current file name                                |
   |---------------------+--------------------------------------------------|
   | $char               | character under the cursor                       |
   |---------------------+--------------------------------------------------|
   | $cmd-count          | repeat-counter for the current macro (read only) |
   |---------------------+--------------------------------------------------|
   | $cmd-encoding       | character set to use for minibuffer              |
   |---------------------+--------------------------------------------------|
   | $cmd-motion         | motion for the current operator (read only)      |
   |---------------------+--------------------------------------------------|
   | $cryptkey           | encryption key (write only)                      |
   |---------------------+--------------------------------------------------|
   | $curchar            | character offset in file                         |
   |---------------------+--------------------------------------------------|
   | $curcol             | current column position of cursor                |
   |---------------------+--------------------------------------------------|
   | $curline            | current line in file                             |
   |---------------------+--------------------------------------------------|
   | $cwd                | current directory                                |
   |---------------------+--------------------------------------------------|
   | $cwline             | line offset in current window                    |
   |---------------------+--------------------------------------------------|
   | $debug              | macro debugging - set true for line by line      |
   |                     | tracing                                          |
   |---------------------+--------------------------------------------------|
   | $directory          | controls location of temp-files (unused)         |
   |---------------------+--------------------------------------------------|
   | $discmd             | display commands on command line (boolean)       |
   |---------------------+--------------------------------------------------|
   | $disinp             | display command line input characters (boolean)  |
   |---------------------+--------------------------------------------------|
   | $empty-lines        | parameter for force-empty-lines command          |
   |---------------------+--------------------------------------------------|
   | $encoding           | character set associated with locale (read only) |
   |---------------------+--------------------------------------------------|
   | $end-of-cmd         | true if user ended the cmd with <cr>             |
   |---------------------+--------------------------------------------------|
   | $error-buffer       | buffer name assigned to the error-buffer         |
   |---------------------+--------------------------------------------------|
   | $error-expr         | regular expression that matched the error-buffer |
   |---------------------+--------------------------------------------------|
   | $error-match        | text that matched the error-buffer               |
   |---------------------+--------------------------------------------------|
   | $error-tabstop      | tabstop to use with error-buffer for %C          |
   |---------------------+--------------------------------------------------|
   | $exec-path          | where to find vile (read only)                   |
   |---------------------+--------------------------------------------------|
   | $exec-suffix        | suffix, if any, for execable programs (read      |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $exit-hook          | name of procedure to run when quitting           |
   |---------------------+--------------------------------------------------|
   | $favorites          | path to favorites folder (win32 only) (read      |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $fchanged           | true if file for current buffer is modified      |
   |                     | (boolean)                                        |
   |---------------------+--------------------------------------------------|
   | $fence-limit        | iteration limit for complex fences               |
   |---------------------+--------------------------------------------------|
   | $filename-expr      | actual pattern for %F in [Error Expressions]     |
   |---------------------+--------------------------------------------------|
   | $filename-ic        | ignore case in filename completion (read only)   |
   |---------------------+--------------------------------------------------|
   | $filter-list        | list of builtin-filters (read only)              |
   |---------------------+--------------------------------------------------|
   | $findpath           | editor's copy of the $VILE_FINDPATH env var      |
   |                     | (read/write)                                     |
   |---------------------+--------------------------------------------------|
   | $find-cmd           | last spawned find command (read only)            |
   |---------------------+--------------------------------------------------|
   | $font               | current font name (X11/winvile versions only)    |
   |---------------------+--------------------------------------------------|
   | $forward-search     | search direction, true=forward                   |
   |---------------------+--------------------------------------------------|
   | $get-at-dot         | ensure that "identifier-like" matching includes  |
   |                     | current editing position.                        |
   |---------------------+--------------------------------------------------|
   | $get-it-all         | match entire "identifier-like" word under the    |
   |                     | cursor.                                          |
   |---------------------+--------------------------------------------------|
   | $get-length         | sets length of "identifier-like" word as         |
   |                     | side-effect.                                     |
   |---------------------+--------------------------------------------------|
   | $get-offset         | sets offset of "identifier-like" word as         |
   |                     | side-effect.                                     |
   |---------------------+--------------------------------------------------|
   | $helpfile           | $VILE_HELP_FILE env var or "vile.hlp"            |
   |                     | (read/write)                                     |
   |---------------------+--------------------------------------------------|
   | $iconname           | current icon name (X11 version only)             |
   |---------------------+--------------------------------------------------|
   | $identifier         | current "identifier-like" word under the cursor. |
   |---------------------+--------------------------------------------------|
   | $kbd-encoding       | keyboard encoding                                |
   |---------------------+--------------------------------------------------|
   | $kbd-macro          | the keyboard macro, see ^X-( ^X-) (read only)    |
   |---------------------+--------------------------------------------------|
   | $kill               | some of the kill register (read only)            |
   |---------------------+--------------------------------------------------|
   | $kill-limit         | maximum length for $kill                         |
   |---------------------+--------------------------------------------------|
   | $kill-size          | length of the kill register (read only)          |
   |---------------------+--------------------------------------------------|
   | $lastkey            | last keyboard char struck                        |
   |---------------------+--------------------------------------------------|
   | $latin1-expr        | pattern to match locales using ISO-8859-1 in     |
   |                     | case they are not installed                      |
   |---------------------+--------------------------------------------------|
   | $lcols              | length of current line, in columns (read only)   |
   |---------------------+--------------------------------------------------|
   | $libdir-path        | appended to $PATH when running filters           |
   |---------------------+--------------------------------------------------|
   | $line               | text of current line starting with cursor        |
   |---------------------+--------------------------------------------------|
   | $llength            | length of current line (read only)               |
   |---------------------+--------------------------------------------------|
   | $locale             | locale, which determines character type (read    |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $majormode          | current majormode, if any (read only)            |
   |---------------------+--------------------------------------------------|
   | $majormode-hook     | procedure to overrride suffix/preamble rules     |
   |---------------------+--------------------------------------------------|
   | $match              | last matched magic pattern (read only)           |
   |---------------------+--------------------------------------------------|
   | $menu-file          | the name of the menu file (e.g. .vilemenu)       |
   |---------------------+--------------------------------------------------|
   | $mode               | current mode ("command","insert","overwrite")    |
   |                     | (rd. o.)                                         |
   |---------------------+--------------------------------------------------|
   | $modeline-format    | format of mode lines. see "Mode line             |
   |                     | customization".                                  |
   |---------------------+--------------------------------------------------|
   | $modeline-limit     | maximum inline offset to scan for mode lines     |
   |---------------------+--------------------------------------------------|
   | $modified           | is current buffer modified or not? (read only)   |
   |---------------------+--------------------------------------------------|
   | $ncolors            | number of displayed colors, must be power of two |
   |---------------------+--------------------------------------------------|
   | $ntildes            | percent of window filled by ~ chars, at end of   |
   |                     | buffer                                           |
   |---------------------+--------------------------------------------------|
   | $ocwd               | previous directory (read only)                   |
   |---------------------+--------------------------------------------------|
   |                     | "dos", "vms", "os/2", "win32", and "unix",       |
   | $os                 | although the latter may be replaced with a more  |
   |                     | specific name derived from vile's configure      |
   |                     | script. (read only)                              |
   |---------------------+--------------------------------------------------|
   | $pagelen            | number of screen lines in use by editor          |
   |---------------------+--------------------------------------------------|
   | $pagewid            | current screen width                             |
   |---------------------+--------------------------------------------------|
   | $palette            | current palette string                           |
   |---------------------+--------------------------------------------------|
   | $patchlevel         | current patch-level (empty for release) (read    |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $pathlist-separator | separator for lists of pathnames, e.g., $PATH    |
   |---------------------+--------------------------------------------------|
   | $pathname           | current "path-like" word, under the cursor.      |
   |---------------------+--------------------------------------------------|
   | $pathname-separator | separator for levels of pathnames, e.g., '/'     |
   |---------------------+--------------------------------------------------|
   | $pending            | typeahead pending flag (read only)               |
   |---------------------+--------------------------------------------------|
   | $pid                | returns vile's process-id (read only)            |
   |---------------------+--------------------------------------------------|
   | $position-format    | format of ^G command. see "Mode line             |
   |                     | customization".                                  |
   |---------------------+--------------------------------------------------|
   | $progname           | returns "vile" or "xvile" or "winvile". (read    |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $prompt             | the command-line prompt string ": "              |
   |---------------------+--------------------------------------------------|
   | $qidentifier        | current qualified name (as with C++ ::)          |
   |---------------------+--------------------------------------------------|
   | $read-hook          | name of procedure to run after a file is read    |
   |---------------------+--------------------------------------------------|
   | $replace            | replacement pattern                              |
   |---------------------+--------------------------------------------------|
   | $return             | set within a macro to provide $_ on completion   |
   |---------------------+--------------------------------------------------|
   | $search             | search pattern                                   |
   |---------------------+--------------------------------------------------|
   | $seed               | current random number seed                       |
   |---------------------+--------------------------------------------------|
   | $shell              | name of the shell program for spawned commands.  |
   |---------------------+--------------------------------------------------|
   | $sres               | current screen resolution                        |
   |---------------------+--------------------------------------------------|
   | $startup-file       | the name of the startup file (e.g. .vilerc)      |
   |---------------------+--------------------------------------------------|
   | $startup-path       | where to find the startup file                   |
   |---------------------+--------------------------------------------------|
   | $status             | returns the status of the last command           |
   |---------------------+--------------------------------------------------|
   | $system-crlf        | the default value for dos mode, which can be     |
   |                     | preset using -u or -U options                    |
   |---------------------+--------------------------------------------------|
   | $system-name        | returns the operating system name shown in the   |
   |                     | version command                                  |
   |---------------------+--------------------------------------------------|
   | $term-cols          | number of columns in terminal window (read only) |
   |---------------------+--------------------------------------------------|
   | $term-encoding      | terminal's encoding support (read only)          |
   |---------------------+--------------------------------------------------|
   | $term-lines         | number of lines in terminal window (read only)   |
   |---------------------+--------------------------------------------------|
   | $term-resizes       | true if vile handles terminal-resizing (read     |
   |                     | only)                                            |
   |---------------------+--------------------------------------------------|
   | $title              | current window title (X11, win32 versions only)  |
   |---------------------+--------------------------------------------------|
   | $title-encoding     | encoding of xterm window title, e.g., "8bit" for |
   |                     | ISO-8859-1 or "utf-8".                           |
   |---------------------+--------------------------------------------------|
   | $title-format       | format of window title. see "Mode line           |
   |                     | customization".                                  |
   |---------------------+--------------------------------------------------|
   | $version            | current version number (read only)               |
   |---------------------+--------------------------------------------------|
   | $with-prefix        | string set by "~with" directives (read only)     |
   |---------------------+--------------------------------------------------|
   | $wlines             | number of lines in current window                |
   |---------------------+--------------------------------------------------|
   | $word               | current "word", a sequence of nonblanks          |
   |---------------------+--------------------------------------------------|
   | $write-hook         | name of procedure to run before a file is        |
   |                     | written                                          |
   |---------------------+--------------------------------------------------|
   | $xdisplay           | the value to set $DISPLAY when running $xshell.  |
   |---------------------+--------------------------------------------------|
   | $xshell             | name of the terminal program for spawned xvile   |
   |                     | commands.                                        |
   |---------------------+--------------------------------------------------|
   | $xshell-flags       | command-line flags after $xshell, normally "-e"  |
   +------------------------------------------------------------------------+

   In addition to the state variables, you may set and use the values of the
   editor modes (i.e., universal modes, buffer-only modes or window-only
   modes), e.g., "setv $dos=true". The global values of the editor modes are
   not visible to the expression evaluator.

   User-defined variables can also be set and used; their names are prefixed
   with the '%' character.

   Response variables (a '@' followed by a prompt-string) cause vile to
   prompt for input with the given prompt-string.

   Buffer variables (a '<' followed by a buffer name) return the current line
   of the specified buffer, automatically setting the position to the next
   line.

  Functions

   There are also functions available, which can act on those variables, or
   on hard-coded values. Operations are expressed in prefix notation, so to
   add to numbers you would say "&add 3 5". You may use any unique
   abbreviation of the function names.

   The "describe-user-functions" command shows this information:

   +------------------------------------------------------------------------+
   | Name            | Args | Description                                   |
   |-----------------+------+-----------------------------------------------|
   | &abs            | 1    | absolute value of a number                    |
   |-----------------+------+-----------------------------------------------|
   | &add            | 2    | add two numbers together                      |
   |-----------------+------+-----------------------------------------------|
   | &and            | 2    | logical and                                   |
   |-----------------+------+-----------------------------------------------|
   | &ascii          | 1    | char to integer conversion                    |
   |-----------------+------+-----------------------------------------------|
   | &bchanged       | 1    | true if given buffer is modified              |
   |-----------------+------+-----------------------------------------------|
   | &bind           | 1    | lookup what function name is bound to key     |
   |-----------------+------+-----------------------------------------------|
   | &cat            | 2    | concatenate string                            |
   |-----------------+------+-----------------------------------------------|
   | &cclass         | 1    | character class (see "show-printable")        |
   |-----------------+------+-----------------------------------------------|
   | &chr            | 1    | integer to char conversion                    |
   |-----------------+------+-----------------------------------------------|
   | &classof        | 1    | inverse of &isa, returns classes for param    |
   |-----------------+------+-----------------------------------------------|
   | &cmatch         | 2    | caseless match regular-expression value       |
   |-----------------+------+-----------------------------------------------|
   | &date           | 2    | format 2nd param with 1st, like strftime.     |
   |-----------------+------+-----------------------------------------------|
   | &default        | 1    | initial/default value for mode or state       |
   |                 |      | variable                                      |
   |-----------------+------+-----------------------------------------------|
   | &divide         | 2    | division                                      |
   |-----------------+------+-----------------------------------------------|
   | &dquery         | 2    | prompt user for input, given default value    |
   |-----------------+------+-----------------------------------------------|
   | &env            | 1    | retrieve a system environment variable        |
   |-----------------+------+-----------------------------------------------|
   | &equal          | 2    | numeric equality                              |
   |-----------------+------+-----------------------------------------------|
   | &error          | 1    | true if the parameter was ERROR               |
   |-----------------+------+-----------------------------------------------|
   | &execable       | 1    | true if file is exec'able                     |
   |-----------------+------+-----------------------------------------------|
   | &fchanged       | 1    | true if file for given buffer is modified     |
   |-----------------+------+-----------------------------------------------|
   | &filter         | 1    | true if the given majormode's filter is       |
   |                 |      | builtin                                       |
   |-----------------+------+-----------------------------------------------|
   | &ftime          | 1    | modification-time of the given file, as a     |
   |                 |      | number                                        |
   |-----------------+------+-----------------------------------------------|
   | &geq            | 2    | numeric greater than or equal                 |
   |-----------------+------+-----------------------------------------------|
   | &get-key        | 0    | (alias for &gtkey)                            |
   |-----------------+------+-----------------------------------------------|
   | &get-key        | 0    | (alias for &gtkey)                            |
   |-----------------+------+-----------------------------------------------|
   | &get-completion | 2    | get name-completion for given category and    |
   |                 |      | value (see below for arguments)               |
   |-----------------+------+-----------------------------------------------|
   | &get-motion     | 1    | (alias for &gtmotion)                         |
   |-----------------+------+-----------------------------------------------|
   | &get-sequence   | 0    | (alias for &gtsequence)                       |
   |-----------------+------+-----------------------------------------------|
   | &global         | 1    | retrieves global mode setting                 |
   |-----------------+------+-----------------------------------------------|
   | &greater        | 2    | numeric greater than                          |
   |-----------------+------+-----------------------------------------------|
   | &gt             | 2    | numeric greater than                          |
   |-----------------+------+-----------------------------------------------|
   | &gtkey          | 0    | get 1 character                               |
   |-----------------+------+-----------------------------------------------|
   | &gtmotion       | 1    | get keycode motion sequence for the binding   |
   |-----------------+------+-----------------------------------------------|
   | &gtsequence     | 0    | get keycode sequence, e.g., #1                |
   |-----------------+------+-----------------------------------------------|
   | &indirect       | 1    | evaluate indirect value                       |
   |-----------------+------+-----------------------------------------------|
   | &isa            | 2    | check if the second param is a member of      |
   |                 |      | first                                         |
   |-----------------+------+-----------------------------------------------|
   | &left           | 2    | left string(string, len)                      |
   |-----------------+------+-----------------------------------------------|
   | &length         | 1    | string length                                 |
   |-----------------+------+-----------------------------------------------|
   | &leq            | 2    | numeric less than or equal                    |
   |-----------------+------+-----------------------------------------------|
   | &lessthan       | 2    | numeric less than                             |
   |-----------------+------+-----------------------------------------------|
   | &local          | 1    | retrieves local mode setting                  |
   |-----------------+------+-----------------------------------------------|
   | &lookup         | 2    | look for filename (see below for arguments)   |
   |-----------------+------+-----------------------------------------------|
   | &lower          | 1    | lower case string                             |
   |-----------------+------+-----------------------------------------------|
   | &lt             | 2    | numeric less than                             |
   |-----------------+------+-----------------------------------------------|
   | &match          | 2    | match regular-expression value                |
   |-----------------+------+-----------------------------------------------|
   | &mclass         | 1    | returns the mode's class, e.g., buffer or     |
   |                 |      | Major                                         |
   |-----------------+------+-----------------------------------------------|
   | &middle         | 3    | mid string(string, pos, len)                  |
   |-----------------+------+-----------------------------------------------|
   | &modulo         | 2    | modulus                                       |
   |-----------------+------+-----------------------------------------------|
   | &negate         | 1    | negate                                        |
   |-----------------+------+-----------------------------------------------|
   | &neq            | 2    | numeric inequality                            |
   |-----------------+------+-----------------------------------------------|
   | &not            | 1    | logical not                                   |
   |-----------------+------+-----------------------------------------------|
   | &or             | 2    | logical or                                    |
   |-----------------+------+-----------------------------------------------|
   | &path           | 2    | extract/translate pathname (see below for     |
   |                 |      | args)                                         |
   |-----------------+------+-----------------------------------------------|
   | &pcat           | 2    | concatenate directory and filename            |
   |-----------------+------+-----------------------------------------------|
   | &pquote         | 1    | quote pathname if needed, e.g., embedded      |
   |                 |      | spaces                                        |
   |-----------------+------+-----------------------------------------------|
   | &qpasswd        | 1    | prompt user for password string               |
   |-----------------+------+-----------------------------------------------|
   | &query          | 1    | prompt user for input                         |
   |-----------------+------+-----------------------------------------------|
   | &random         | 1    | get a random number from 1 to n               |
   |-----------------+------+-----------------------------------------------|
   | &rd             | 1    | is a file readable                            |
   |-----------------+------+-----------------------------------------------|
   | &readable       | 1    | is a file readable                            |
   |-----------------+------+-----------------------------------------------|
   | &regex-escape   | 1    | returns value with regex metacharacters       |
   |                 |      | escaped                                       |
   |-----------------+------+-----------------------------------------------|
   | &register       | 1    | value of register (1-character name)          |
   |-----------------+------+-----------------------------------------------|
   | &right          | 2    | right string(string, pos)                     |
   |-----------------+------+-----------------------------------------------|
   | &rnd            | 1    | get a random number from 1 to n               |
   |-----------------+------+-----------------------------------------------|
   | &sequal         | 2    | string logical equality check                 |
   |-----------------+------+-----------------------------------------------|
   | &sgeq           | 2    | string greater than or equal                  |
   |-----------------+------+-----------------------------------------------|
   | &sgreater       | 2    | string logical greater than                   |
   |-----------------+------+-----------------------------------------------|
   | &sgt            | 2    | string greater than                           |
   |-----------------+------+-----------------------------------------------|
   | &sindex         | 2    | find the index of second string in first      |
   |-----------------+------+-----------------------------------------------|
   | &sleq           | 2    | string less than or equal                     |
   |-----------------+------+-----------------------------------------------|
   | &sless          | 2    | string logical less than                      |
   |-----------------+------+-----------------------------------------------|
   | &slt            | 2    | string less than                              |
   |-----------------+------+-----------------------------------------------|
   | &sneq           | 2    | string inequality                             |
   |-----------------+------+-----------------------------------------------|
   | &stime          | 1    | system-time, as a number                      |
   |-----------------+------+-----------------------------------------------|
   | &stoken         | 3    | true if token found in string, given delims   |
   |-----------------+------+-----------------------------------------------|
   | &subtract       | 2    | subtraction                                   |
   |-----------------+------+-----------------------------------------------|
   | &times          | 2    | multiplication                                |
   |-----------------+------+-----------------------------------------------|
   | &token          | 3    | select n'th token of string, given delims     |
   |-----------------+------+-----------------------------------------------|
   | &translate      | 3    | translate "from" to "to" for given string.    |
   |-----------------+------+-----------------------------------------------|
   | &trim           | 1    | trim whitespace from string                   |
   |-----------------+------+-----------------------------------------------|
   | &upper          | 1    | uppercase string                              |
   |-----------------+------+-----------------------------------------------|
   | &word           | 2    | select n'th word of string, blank-separated   |
   |-----------------+------+-----------------------------------------------|
   | &writable       | 1    | is a file writable                            |
   +------------------------------------------------------------------------+

   The &get-completion function takes two arguments. The first is a category
   (one of "buffer", "command", "directory", "filename", "register" or
   "tags"). The second is an initial value to complete.

   The &lookup function takes two arguments. The first is a keyword and the
   second is a filename. Keywords may be combined with '+', e.g., r+bin to
   find a readable file in the directory where vile's executable is. The
   keywords are for location:

   +------------------------------------------+
   | bin     | look in vile's directory       |
   |---------+--------------------------------|
   | current | look in the current directory  |
   |---------+--------------------------------|
   | home    | look in user's $HOME directory |
   |---------+--------------------------------|
   | libdir  | look along $libdir-path        |
   |---------+--------------------------------|
   | path    | look along user's $PATH        |
   |---------+--------------------------------|
   | startup | look along $startup-path       |
   +------------------------------------------+

   and for access type, defaulting to an existence check:

   +--------------------------------------+
   | execable | test if file is exec'able |
   |----------+---------------------------|
   | readable | test if file is readable  |
   |----------+---------------------------|
   | writable | test if file is writable  |
   +--------------------------------------+

   Search order is fixed: current, home, bin, startup, path, libdir

   The &path function takes two arguments. The first is a keyword and the
   second is a pathname. Keywords are: end (suffix of the filename), full
   (absolute path), head (directory), root (filename without suffix), short
   (relative path), tail (filename).

  Directives

   Primitive flow-of-control within a macro may be obtained with certain
   directives. Macro directives start with a "~" and include the following:
   (see the file macros.doc for more detail)

   +------------------------------------------------------------------------+
   | Name             | Description                                        ||
   |------------------+----------------------------------------------------+|
   | ~break           | exit a ~while loop                                 ||
   |------------------+----------------------------------------------------+|
   | ~else            | default conditional execution                      ||
   |------------------+----------------------------------------------------||
   | ~elseif cond     | alternate conditional execution                    ||
   |------------------+----------------------------------------------------||
   | ~elsewith tokens | alterate tokens to following commands              ||
   |------------------+----------------------------------------------------||
   | ~endif           | finish conditional execution                       ||
   |------------------+----------------------------------------------------+|
   | ~endm            | finish a macro                                     ||
   |------------------+----------------------------------------------------+|
   | ~endwhile        | finish a ~while loop                               ||
   |------------------+----------------------------------------------------+|
   | ~endwith         | finish a ~with block                               ||
   |------------------+----------------------------------------------------+|
   | ~force           | force macro to continue even if command fails      ||
   |------------------+----------------------------------------------------||
   | ~goto label      | jump to a label in the current macro               ||
   |------------------+----------------------------------------------------+|
   | ~hidden          | do not update screen while the macro executes      ||
   |------------------+----------------------------------------------------+|
   | ~if cond         | start conditional execution                        ||
   |------------------+----------------------------------------------------||
   | ~local vars      | save specified variables, restore when macro       ||
   |                  | terminates                                         ||
   |------------------+----------------------------------------------------+|
   | ~quiet           | suppress messages while the macro executes         ||
   |------------------+----------------------------------------------------+|
   | ~return          | terminate current macro                            ||
   |------------------+----------------------------------------------------||
   | ~trace cond      | set $debug trace                                   ||
   |------------------+----------------------------------------------------||
   | ~while cond      | execute a loop if the condition is true            ||
   |------------------+----------------------------------------------------||
   | ~with tokens     | prepend tokens to following commands               ||
   +------------------------------------------------------------------------+

   Line labels begin with a "*" as the first nonblank char, like:

     *LBL01

   You would jump to this with:

     ~goto LBL01

   Lines ending with '\' are joined before interpreting them.

  Hooks

   There are a few places within vile where a user-specifiable procedure will
   be executed if desired. These points are referred to as "hooks". Hooks are
   specified by special variables which hold the name of a procedure to run
   at that point in the code. For instance, there is a "cd-hook", which is
   run when you changej directories. Assume the following are included within
   a vile startup file:

     store-procedure my-cd-action
            write-message &cat &cat &cat "moved from " $ocwd " to " $cwd
            ~if &seq $progname "xvile"
                    set-variable $title $cwd
            ~endif
     ~endm
     set cd-hook my-cd-action

   Whenever the current directory is changed within the editor (via the "cd"
   command), my-cd-action will print a message and, under xvile, change the
   window title.

   The following hooks are currently implemented:

   +------------------------------------------------------------------------+
   | $autocolor-hook | applies syntax coloring to modified buffers when the |
   |                 | keyboard is idle for a user-configurable time period |
   |-----------------+------------------------------------------------------|
   | $buffer-hook    | run when switching to a buffer                       |
   |-----------------+------------------------------------------------------|
   | $cd-hook        | run when changing directories                        |
   |-----------------+------------------------------------------------------|
   | $exit-hook      | run when quitting                                    |
   |-----------------+------------------------------------------------------|
   | $majormode-hook | procedure to overrride suffix/preamble rules         |
   |-----------------+------------------------------------------------------|
   | $read-hook      | run after a file is read                             |
   |-----------------+------------------------------------------------------|
   | $write-hook     | run before a file is written                         |
   +------------------------------------------------------------------------+

   Be careful with "buffer-hook". Executing commands in the hook which
   themselves switch buffers is not recommended. In general, all the hooks
   are a little dangerous, since vile has not been written with re-entrancy
   foremost in mind. One should avoid putting actions in hooks which might
   cause the hook to be re-executed. (vile keeps the hook procedure itself
   from being re-executed, to prevent recursion, but the code surrounding the
   call to it may not be safe either.)

  Macro examples

   To prevent vile from thinking that a failed command is an error in the
   macro, you can put "~force" in front of it. So, to write a macro which
   will run the "man" command on the identifier under the cursor, where you
   don't really consider it an error if the command fails, you might use:

     9 store-macro
             ~force 1 shell-command &cat "man " $identifier
     ~endm
     bind-key execute-macro-9 ^X-m

   (The argument '1' suppresses the "press return" prompt which normally
   appears after a command runs, since man runs a pager which does this
   anyway.)

   The "screen-search-forward" command could be re-implemented as:

     10 store-macro
             ~force search-forward $identifier
     ~endm
     bind-key execute-macro-10 ^X-/

   And the "screen-search-pattern-grab" command, normally bound to ^A-/,
   could be implemented with:

     11 store-macro
         set-variable $search $identifier
         write-message &cat "Search pattern is now " $search
     ~endm
     bind-key execute-macro-11 ^A-/

   A variation, which will not find the identifier if it is a substring of
   another word, is:

     12 store-macro
             ~force search-forward &cat "\\<" &cat $identifier "\\>"
     ~endm

   This works by surrounding the string with the \< and \> regular expression
   metacharacters.

   Here's another example, which finds C++ qualified identifiers, and uses
   them for a tag lookup:

           ; Implement  ^A-^] for qualified-name tag lookup
     24 store-macro
             backward-character
             ~local $search
             search-forward "^[a-zA-Z_][a-zA-Z0-9_:]*"
             write-message &cat "Tag pattern is now " $match
             ~force find-tag $match
     ~endm
     bind-key execute-macro-24 ^A-^]

   (The "backward-character" is needed because "search-forward" will always
   skip the cursor position when scanning, so as to always find the next
   occurrence. The directive ~local is used to avoid disturbing the search
   string.)

   Note that for simple key-remappings, binding is often preferable to
   creating a macro. Some people prefer using lower-case 'g' to as an
   equivalent to 'G', to goto a specific line. If done as a macro, like this:

     3 store-macro
             goto-line
     ~endm
     bind-key execute-macro-3 g

   then both g and G go to the end of the file, but whereas 1000G goes to
   line 1000, 1000g goes to the end of the file 1000 times. It is easier (and
   more correct) to do:

     bind-key goto-line g

   A couple more examples of slightly more complex macros: They cause a jump
   to the next (or previous) line of the same (or lesser) indent, skipping
   over empty lines. (Thanks to MIURA Masahiro)

     ; macro 1 - back to the line of same indent
     ;
     1 store-macro
             first-nonwhite
             set-variable %indlev $curcol
             ~force back-line-at-bol
             ~if &seq &trim $line ""
                     ~goto L1
             ~endif
             ~while &les %indlev $curcol
                     *L1
                     ~force back-line-at-bol
                     ~if &seq $status "FALSE"
                             ~return
                     ~endif
                     ~if &seq &trim $line ""
                             ~goto L1
                     ~endif
             ~endwhile
     ~endm
     bind-key execute-macro-1 ^X-[

     ; macro 2 - forward to the line of same indent
     ;
     2 store-macro
             first-nonwhite
             set-variable %indlev $curcol
             ~force down-line-at-bol
             ~if &seq &trim $line ""
                     ~goto L2
             ~endif
             ~while &les %indlev $curcol
                     *L2
                     ~force down-line-at-bol
                     ~if &seq $status "FALSE"
                             ~return
                     ~endif
                     ~if &seq &trim $line ""
                             ~goto L2
                     ~endif
             ~endwhile
     ~endm
     bind-key execute-macro-2 ^X-]

     ; Use "@d" to change cwd to the dir containing the current file
     ; (contributed by Richard Hussong).  Keep in mind that "^M" is an
     ; explict CR and that ":cd -" reverts cwd to its previous value.
     store-procedure cdcur
             cd &path head $cfilname
     ~endm
     use-register d load-register ":cdcur^M"

     ;; Underline current line with user-specified char.  Ex:
     ;;        blah blah blah blah   <-- curr line
     ;;        +++++++++++++++++++   <-- underline with +
     ;; from Daniel L. Ashbrook .
     store-procedure underline-currline
             write-message "enter underline char now..."
             set-variable %linechar &gtkey
             write-message ""
             ; don't underline trailing whitespace (trivial)
             trim-lines-til end-of-line
             ; don't underline leading whitespace (nontrivial)
             goto-bol
             setv %ldspace=&equ $char &ascii ' '
             setv %ldtab=&equ $char &ascii "\t"
             setv %ldwhite=&or %ldspace %ldtab
             ~if %ldwhite
             ~force substitute-til next-punctuated-word '^\b\b*' ''
             ~endif
             ; compute length sans lead/trail whitespace
             set-variable %linelength $llength
             ~if %ldwhite
                     ; put leading whitespace back
                     undo-change
                     ; it's not possible to disable the screen clutter of
                     ; visual-matches mode (following a substitution)
                     ; for all buffers from within a macro. so substitute
                     ; for an improbable char (which achieves desired effect)
                     ~force substitute-til next-punctuated-word &chr \xff &chr \xff
                     ~force clear-visual-matches
             ~endif
             unset-variable %ustring
             set-variable %i 0
             ; build underline string in memory and insert with a
             ; single operation (optimizes undo)
             ~while &less %i %linelength
                     set-variable %ustring &cat %ustring %linechar
                     set-variable %i &add %i 1
             ~endwhile
             ; force ustring to align with prev line
             ~local $autoindent
             setv $autoindent=true
             goto-eol
             append-string &chr 13  ; 13 -> CR
             insert-string %ustring
             ~force next-line
             goto-bol
     ~endm
     bind-key underline-currline #-

     ; macro 14 - grep for the word under the cursor, and put the result
     ;       in a buffer named after that word.  set the error-buffer,
     ;       so that ^X-^X may be used to visit the lines found by grep.
     ;       (we have to set error-buffer explicitly, since we renamed
     ;       the buffer -- otherwise it tracks the last pipe read by vile)
     14 store-macro
             set-variable %grepfor $identifier
             edit-file &cat "!egrep -n " &cat %grepfor " *.[chs]"
             rename-buffer %grepfor
             error-buffer %grepfor
     ~endm
     bind-key execute-macro-14 ^A-g

   As a hint, it is (almost?) never correct to write a ':' command when
   creating a programmed macro. For instance, if you find yourself writing
   something like:

     &cat ":!chmod +w " $cfilname
     &cat ":e! " $cfilname

   (in an attempt to make a buffer writable before editing it), then what you
   really want is:

     shell-command &cat "chmod +w " $cfilname
     replace-with-file $cfilname

   Furthermore, some things are just as easy if done with a "keystroke" macro
   rather than a programmed macro:

     ; use this as '@w'
     use-register w load-register ":!chmod +w %^M:setl noview^M:w^M"

   or

     map ^A-w ":!chmod +w %^M:setl noview^M:w^M"

   (Of course you need to replace the ^M's with real carriage-returns.)

  Picture Mode

   Another example of a fairly complex vile procedure can be found in the
   file "pictmode.rc". The code there implements a primitive means of drawing
   "ASCII art". To use it, first ":source pictmode.rc" and then "run pic".
   See the comments at the top of pictmode.rc for more information...


Regular Expressions
-------------------
   Searches use regular expressions, which, as in vi, may be magic by default
   or not.

   vile introduces some new magic metacharacters.

   The code that implements the expressions is based directly on Henry
   Spencer's regexp code. Quoting from the original man page:

   [For ease of reference, the metacharacters are noted on the left margin.]

     \|   A regular expression is zero or more branches, separated by `\|'.
          It matches anything that matches one of the branches.
          A branch is zero or more pieces, concatenated. It matches a match
          for the first, followed by a match for the second, etc.
          A piece is an atom possibly followed by `*', `\+', or `\?'. An atom
     *    followed by `*' matches a sequence of 0 or more matches of the
     +    atom. An atom followed by `\+' matches a sequence of 1 or more
     \?   matches of the atom. An atom followed by `\?' matches a match of
          the atom, or the null string. [i.e., `\?' matches 0 or 1
          occurrences]
          An atom is a regular expression in backslashed parentheses
   \( \)  (matching a match for the regular expression), a range (see below),
    . ^   (matching any single character), `^' (matching the null string at
     $    the beginning of the input string), `$' (matching the null string
     \c   at the end of the input string), a `\' followed by a single
     c    character (matching that character), or a single character with no
          other significance (matching that character).
   \< \>  In addition, vile atoms may be: \< and \>, which match the
          beginning and end of a "word".
          Vile recognizes the X/Open regular expression character classes
          (and additional character classes), as well as shorthand
          expressions for them. You can use the shorthand expressions in a
          range or as an atom. Each shorthand expression has a complement,
          e.g., \w and \W.
   \i \I  [:alnum:]
   \a \A  [:alpha:]
   \b \B  [:blank:]
   \c \C  [:cntrl:]
   \d \D  [:digit:]
   \f \F  [:file:]
   \g \G  [:graph:]
   \w \W  [:ident:], alphanumeric (plus '_')
   \l \L  [:lower:]
   \o \O  [:octal:]
   \p \P  [:print:], printable (note that space is printable)
   \q \Q  [:punct:]
   \s \S  [:space:]
   \u \U  [:upper:]
   \x \X  [:xdigit:]
          A range is a sequence of characters enclosed in `[]'. It normally
          matches any single character from the sequence. If the sequence
          begins with `^', it matches any single character not from the rest
          of the sequence. If two characters in the sequence are separated by
   [ ]    `-', this is shorthand for the full list of ASCII characters
          between them (e.g. `[0-9]' matches any decimal digit). To include a
          literal `]' in the sequence, make it the first character (following
          a possible `^'). To include a literal `-', make it the first or
          last character.
          Additionally for vile, if "ignorecase" is set, then all literal
          matches, including those in character classes, are done without
          regard to upper and lower case.
          In magic mode, the following set of metacharacters must be preceded
          by '\' to hide their special meaning: * [ . ^ $ These characters
          are special if they _are_ preceded with a '\': ? + ( ) | < >
          If magic mode is _not_ on, only ^ and $ are special if not escaped.
          All of the following must be preceded with a '\' to be special,
          otherwise they are taken literally: ? + ( ) | * [ . < >
          Replacement subexpressions are supported when substituting. That
          is, if part of an expression is contained in \( and \), then the
   \1 \9  part of the matched text in between those symbols will be
          substituted for an occurrence of \1 in the replacement pattern. Up
          to 9 such substitutions can be made. The special symbol & will &
          substitute for the entire match string.
          The tilde (~) character will expand immediately when it is typed to
          be the contents of the previously entered replacement pattern. [
     ~    Earlier versions of vile made this version of the pattern available
          immediately, as a default response, but this made it difficult to
          substitute nothing after previously substituting something. ]
          The replacement part of the substitution may also contain the
          special sequences \U and \L, which cause the replacement to be
   \U \L  forced to uppercase or lowercase until a terminating \E is found;
     \E   \u and \l, which force the case of a single character; and \b, \f,
   \u \l  \r, \t, \n, which insert the usual ASCII character. Note that vile
   \bfrtn mimics perl's handling of \u\L\1\E instead of vi's. Given
          :s/\(abc\)/\u\L\1\E/ vi will replace with "abc" whereas vile and
          perl will replace with "Abc". This is somewhat more useful for
          capitalizing words.


Command files
-------------
   On startup, in the absence of '@' arguments, vile attempts to read the
   file ".vilerc" ("vile.rc" on non-Unix hosts) in the current directory,
   then in $HOME, and then in several host-specific locations (see the
   "Invocation" topic below for complete details). If found, vile executes
   the startup file's commands. It is possible to nest such executions. For
   example, you might keep your general default settings in your home
   directory, and put the following lines in a .vilerc in a directory in
   which you prefer tabs be set to 4 spaces:

     source "$HOME/.vilerc"
     set tabstop 4

   The quotes surrounding the filename are necessary to protect the name from
   interpretation as a vile variable, since it starts with the '$' character.

   Files can be executed at any time with the ":source" (or ":execute-file")
   command. There are control structures available, such as ~while, ~if, etc.
   Refer to the file doc/macros.doc which is distributed with vile for more
   information.

   Nesting of source'd files is limited to a depth of ten, to prevent
   infinite recursion.

   The ';' character can be used as a comment character in command files, but
   not necessarily on the same line as valid commands. Put your comments on
   separate lines to be safe.


Invocation
----------
   vile searches for a startup or command file in these locations (and in the
   order listed):

         1 - current working directory
         2 - directory specified by $HOME
         3 - if host is not Unix
                 vile executable directory
             fi
         4 - each directory specified in $VILE_STARTUP_PATH.  If
             this environment variable is not set, the following
             host-specific defaults are internally assumed:

             VMS:  sys$login,sys$sysdevice:[vmstools],sys$library

             DOS, OS/2 and Win32:  /sys/public;/usr/bin;/bin;/

             Unix:  depends on whether or not $VILE_STARTUP_PATH was
                    set when vile was configured prior to
                    compilation.  If set, then the value of that
                    environment var is compiled into the editor,
                    else the default configure "datadir" is
                    selected, which is either:

                    /usr/local/share/vile   (typical root build)
                    ${prefix}/share/vile    (nonroot build)

         5 - if host is not Unix, each directory specified in:
                 $PATH
                 $VILE_LIBDIR_PATH
             fi

   If the variable VILEINIT is set in the environment, it is used as a set of
   vile commands to initialize the editor. As a not-very-useful example of a
   VILEINIT sequence, the following setting recreates portions of the default
   initialization behavior:

     export VILEINIT
     VILEINIT="
     ~if &rd \"./.vilerc\"
             source \"./.vilerc\"
     ~else
             ~if &rd \"$HOME/.vilerc\"
                     source \"$HOME/.vilerc\"
             ~endif
     ~endif"

   Other environment variables:

   VILE_ERROR_ABORT
           if VILE_ERROR_ABORT is defined during compilation, setting this
           environment variable at runtime will cause vile to abort (and dump
           core) rather than attempt to cleanup and exit with an error code
           on fatal errors. This is used for debugging.

   VILE_HELP_FILE
           override the name of the help file, normally "vile.hlp". This sets
           the $helpfile variable.

   VILE_LIBDIR_PATH
           override the search path for filter programs, normally the
           library-directory on UNIX systems. This sets the $libdir-path
           variable, which is appended to your $PATH variable when running
           filter commands on UNIX and Win32.

   VILE_LOCALE_MAPPING
           override the pattern used to associate wide/narrow locales. vile
           uses this to compute a possible 8-bit "narrow" locale which
           corresponds to the current locale, thereby supporting editing of
           wide- and narrow-encoded text.

           The default value, /\\.\\(UTF\\|utf\\)[-]\\?8$//, simply strips
           the most common suffixes used for wide-character locales. For
           example, "en_US.UTF-8" would be converted to "en_US". If your
           computer's locale tables do not support that, you can modify the
           pattern to help vile find the narrow locale value that works.

   VILE_MENU

   XVILE_MENU
           if set, overrides the compiled-in location of the menu file used
           by xvile. If $VILE_MENU is unset, xvile checks the $XVILE_MENU
           variable (or XMVILE_MENU, if the program is renamed xmvile, etc).

   VILE_NROFF_FILT
           if set, overrides the choice between "nroff" and "cawf" (depending
           on platform) in the ShowFormatted macro (^X-n). You may want to
           set this to "groff" if your system has groff installed, for
           instance, but relies on an antique version of nroff for manpages.

   VILE_PWD
           if set, assume invoking shell's "$PWD" variable is valid, and use
           that rather than an initial getcwd() call.

   VILE_SPELL_FILT
           if set, overrides the compiled-in program name and options for the
           spell-filter. Normally that is a string such as "spell -l"

   VILE_STARTUP_FILE
           override the name of the startup file, normally ".vilerc" (or
           "vile.rc" for non-UNIX systems).

   VILE_STARTUP_PATH
           override the search path for the startup and help files. This sets
           the $startup-path variable.

   VILE_TABLE_FILT
           if set, indicates that "tbl" is available. Set this to "cat" if
           you do not want to use "tbl", but do want to use "nroff", etc (see
           VILE_NROFF_FILT). It is used in the ShowFormatted macro (^X-n).

   Note: For simplification, the filters.rc script assumes that the filter
   programs are in $PATH. The $libdir-path feature may not work for you
   out-of-the-box, since your shell's initialization file (e.g., ".cshrc")
   may set $PATH. One solution (other than adding /usr/local/lib/vile to
   $PATH) is to set the vile variable $shell to /bin/sh, assuming you have no
   Bourne shell ".profile" to set $PATH. Then vile's modification of $PATH
   affects the filter process and also runs faster.

  Command line options

   The command line options are fairly straightforward. vile supports running
   just _any_ command after a '+', as does vi. It also has some shortcut
   options to support the commonly used '+400' to go to line 400 and '+/foo'
   to search for foo. Command files can be explicitly executed on startup by
   prefixing them with the '@' character, as in "vile @mycmds file.c". This
   will suppress the operation of VILEINIT and the .vilerc files.

   -?
           print the usage message.

   -c command
           will execute the given command after loading the first file.

   +NNN and -gNNN
           vile will begin the session on the first file at the specified
           line number.

   +/pattern or -s pattern
           In the first file, vile will execute an initial search for the
           given pattern.

   -t tag
           vile will edit the correct file and move the cursor to the
           location of the tag. This requires a tagsfile created with the
           ctags(1) command.

   -h
           Invokes vile on the helpfile.

   -v
           Invokes vile in "view" mode - no changes are permitted to the
           buffer in this mode. (This will also be true if vile is invoked as
           view.)

   -V
           vile will report its version number.

   @cmdfile vile will run the specified file as its startup file, and will
   bypass any normal startup file (i.e. .vilerc) or environment variable
   (i.e. $VILEINIT).


Encryption
----------
   vile implements an interface to the UNIX crypt function, like standard vi,
   and can apply this to your buffers either automatically (via a mode
   setting) or manually (via an explicit command). The algorithm is
   reversible, so encrypting a previously encrypted buffer will undo that
   encryption.

   The encryption key for a buffer will be a) inherited from the global
   cryptkey which was set via the vile command line (-k) if it exists, b) set
   with the set-crypt-key (^X-X) command, or c) obtained from the user
   interactively. The details of this are a little messy, and should probably
   be cleaned up somewhat. The buffer's key will remain active until changed
   or reset.

   If "crypt" mode is on, then when the buffer is written the user will be
   prompted for the encryption key to use if none has yet been set. If
   "crypt" mode is on, and an encryption key has been set, then the buffer
   will be encrypted when read. In practice this means you need to read the
   file, then set crypt mode, then reread the file. (Or, equivalently, create
   the buffer, set crypt mode, and then insert the file into it (with ":r").

   As an alternative to UNIX crypt, the collection of macros in the file
   macros/gnugpg.rc facilitates use of GNU's gpg encryption package. gpg and
   gnugpg.rc work well on both Unix and win32 hosts.


Crash Recovery
--------------
   The "vi -r" option, used to recover an edited buffer after a system crash,
   is not present in vile. If vile itself crashes (usually (though
   infrequently :-) due to a bug, but perhaps due to an externally applied
   signal), it attempts to save any modified buffers in a temporary directory
   and, on a Unix host, sends mail to the user to that affect. The selection
   of the temporary directory is host-specific, as follows:

  Unix (in priority order)

     $TMPDIR/vileDXXXXXX
     /var/tmp/vileDXXXXX
     /usr/tmp/vileDXXXXX
     /tmp/vileDXXXXXX
     ./vileDXXXXXX

  DOS and OS/2

   Saved buffers are written to disk using the path ./V<buffername> .

  All other hosts (in priority order)

     $TMPDIR/vileDXXXXXX
     ./vileDXXXXXX

   where "XXXXXX" is a unique suffix created by mktemp().

   If system crashes are frequent on your system, you should stop using it.
   You might also consider the "autosave" and "autowrite" options, which will
   cause more frequent saves of your work.


Mode line customization
-----------------------
   At the bottom of each window is a mode (or "status") line which is used
   for displaying certain characteristics of the window and the buffer
   associated with it. On most displays, this mode line will be highlighted
   in reverse video or via other means in order to visually separate windows
   and to distinguish the mode line from text displayed in the window.

   The editor variable "modeline-format" is set to a string which controls
   formatting of mode lines. This variable is user settable and thus may be
   used to customize the display of mode lines. The format specifiers which
   may appear in the format control strings are as follows:

   +------------------------------------------------------------------------+
   | Format  | Description                                                  |
   |---------+--------------------------------------------------------------|
   | %b      | buffer name                                                  |
   |---------+--------------------------------------------------------------|
   | %c      | column number if "ruler" is set                              |
   |---------+--------------------------------------------------------------|
   | %C      | character value at current edit-position.                    |
   |---------+--------------------------------------------------------------|
   | %f      | file name when not internal buffer and when not the same as  |
   |         | the buffer name.                                             |
   |---------+--------------------------------------------------------------|
   | %F      | file name when it is internal buffer name and not the same   |
   |         | as the buffer name.                                          |
   |---------+--------------------------------------------------------------|
   |         | insert/overwrite/replace mode indicator, displayed only when |
   | %i      | in insert, overwrite, or replace mode. When not in one of    |
   |         | these modes, the separator character (often "-", "=", or "   |
   |         | ") will be displayed.                                        |
   |---------+--------------------------------------------------------------|
   | %l      | line number to be displayed if "ruler" is set                |
   |---------+--------------------------------------------------------------|
   | %L      | number of lines in buffer, if ruler is set                   |
   |---------+--------------------------------------------------------------|
   | %m      | major mode(s), e.g., cmode, view-only, etc. Displayed in     |
   |         | square brackets.                                             |
   |---------+--------------------------------------------------------------|
   | %M      | brief version of "%m", omitting "mode", etc.                 |
   |---------+--------------------------------------------------------------|
   | %n      | file leaf name when not internal buffer name, otherwise the  |
   |         | buffer name.                                                 |
   |---------+--------------------------------------------------------------|
   | %N      | absolute file path when not internal buffer name, otherwise  |
   |         | the buffer name.                                             |
   |---------+--------------------------------------------------------------|
   | %p      | line number as percentage of number of lines if "ruler" is   |
   |         | set                                                          |
   |---------+--------------------------------------------------------------|
   | %P      | line number as percentage of number of lines                 |
   |---------+--------------------------------------------------------------|
   | %r      | relative file name when not internal buffer name, otherwise  |
   |         | the buffer name.                                             |
   |---------+--------------------------------------------------------------|
   |         | rough position of window with respect to buffer (top, bot,   |
   | %S      | all, emp, mid) when ruler not set (or ruler is set, but      |
   |         | buffer is empty).                                            |
   |---------+--------------------------------------------------------------|
   |         | middle separator; should appear at most once in a format     |
   | %=      | string. This indicates where to separate the left and right  |
   |         | hand portions of the mode line with a long string of dashes  |
   |         | (or whatever the separator character is).                    |
   |---------+--------------------------------------------------------------|
   | %-      | single occurrence of separator character                     |
   |---------+--------------------------------------------------------------|
   | %|      | eighty column indicator                                      |
   |---------+--------------------------------------------------------------|
   | %%      | percent sign                                                 |
   |---------+--------------------------------------------------------------|
   | %:      | colon                                                        |
   |---------+--------------------------------------------------------------|
   | %{name} | any internal mode/variable value, given its name             |
   +------------------------------------------------------------------------+

   Some of the format specifiers (%f, %F, %m, %l, %c, %p, %S, %L, %C) are
   conditionally displayed. For example "%m" will display the major modes
   only if there are some major modes set or if the buffer has been modified
   (which is sort of a major mode). Similarly, "%F" and "%f" will cause the
   associated file name to be displayed when the buffer is of the appropriate
   type (a scratch buffer or not) and the shortened file name is different
   from the buffer name. It is desirable at times to cause a prefix string
   and/or a suffix string to be emitted along with the string obtained after
   conversion of the format specifier. This may be done by following the
   format specifier with a colon, the prefix string, another colon, the
   suffix string, and another colon. For example, "%l:(:,:%c::) :" might be
   used to display the line and column number for "ruler" mode. Note that
   either or both of the prefix and suffix strings may be empty.

   Characters in the string which are not part of a format specifier are
   output verbatim.

   The default format control string is as follows:

     "%-%i%- %b %m:: :%f:is : :%=%F: : :%l:(:,:%c::) :%p::% :%C:char ::%S%-%-%|"

   Mode lines for some versions of vile previous to version 4.7 can be
   obtained with the following format string. This will remove the percentage
   indication from the mode line when in ruler mode and also shift the ruler
   indicator to the far right in the mode line.

     "%-%i%- %b %m:: :%f:is : :%=%F: : %-%-%-%-:%l:(:,:%c::):%S::%-%-:%|"


Color basics
------------
   The editor's support of color varies from host to host. On some hosts,
   such as VMS and DOS, limited capability exists. On other hosts, full-blown
   syntax coloring is provided for a wide variety of languages and tools.
   Prior to discussing the ins and outs of syntax coloring, it helps to first
   describe several key color features and concepts.

  Console/standard vile versus GUI vile

   Depending on the host, vile comes in two flavors:

     * console (or "standard") vile, which displays text with block
       character, cursor-based addressing.
     * GUI vile (aka, winvile on a win32 host and xvile on a Unix host),
       which displays text using the host's GUI APIs.

   In general, GUI vile supports a richer set of color features and
   capabilities than console vile.

  Color palette

   Depending on the capabilities of the host operating system and the
   underlying display hardware, vile supports a palette of up to 16 colors.
   The editor's color names are fixed, as shown in this list:

   +-----------------------------------------+
   | External user name | Internal vile name |
   |--------------------+--------------------|
   | black              | C0                 |
   |--------------------+--------------------|
   | red                | C1                 |
   |--------------------+--------------------|
   | green              | C2                 |
   |--------------------+--------------------|
   | brown              | C3                 |
   |--------------------+--------------------|
   | blue               | C4                 |
   |--------------------+--------------------|
   | magenta            | C5                 |
   |--------------------+--------------------|
   | cyan               | C6                 |
   |--------------------+--------------------|
   | lightgray          | C7                 |
   |--------------------+--------------------|
   | gray               | C8                 |
   |--------------------+--------------------|
   | brightred          | C9                 |
   |--------------------+--------------------|
   | brightgreen        | CA                 |
   |--------------------+--------------------|
   | yellow             | CB                 |
   |--------------------+--------------------|
   | brightblue         | CC                 |
   |--------------------+--------------------|
   | brightmagenta      | CD                 |
   |--------------------+--------------------|
   | brightcyan         | CE                 |
   |--------------------+--------------------|
   | white              | CF                 |
   +-----------------------------------------+

   Note that both xvile and winvile provide support for the mapping of
   arbitrary RBG values to the above color names, thus permitting the
   creation of a customized color palette.

  xvile custom colors

   When a color X server and color display are available, xvile's default
   colors are modified by changing the editor's color resources (refer to the
   topic "X Resources" in this help file). So, for example, the following
   line in an .Xdefaults or .Xresources file maps "gray" above to red:

     XVile.color.fcolor8: rgb:ff/0/0

   or

     XVile.color.fcolor8: red

  winvile custom colors

   winvile's default colors are changed via the editor's set-rgb-palette
   command. Mirroring the example above, map "gray" to red like so:

     set-rgb-palette gray 255 0 0

  Display attributes

   vile supports bold, italic, underline, and reverse display attributes.
   These attributes may be used to modify/enhance any of the existing colors
   (e.g., bold blue), or render text as a "color" in its own right (e.g.,
   configure the editor to highlight all matched search strings in the
   reverse attribute).

  Show-colors command

   The show-colors command (i.e., ":show-colors") displays the editor's
   current color and attribute mappings.

  Xterms, terminfo, and termcap (Unix hosts only)

   Note that on some unix hosts it's possible to run standard vile in a color
   xterm and thereby gain access to an expanded color palette (albeit often
   limited to 8 colors). However, this is only possible when:

     * your terminal type (specified via the $TERM environment var) supports
       color, and
     * vile is compiled and linked with the terminfo library.

   Hint 1: Modern xterm and similar terminal emulators support 8 colors
   (i.e., ensure that the correct $TERM is used, e.g., "export TERM=xterm" or
   csh equiv is included in your shell startup file).

   Hint 2: To determine if the editor was compiled with terminfo, type
   :show-variables and examine the value of $cfgopts. If this variable
   includes the string "terminfo", you've got a shot. If "termcap" is listed
   instead, vile's color palette is limited to black and white (i.e., no
   color). Assuming your host supports terminfo, the following build commands
   force the editor to use that library:

     $ make clean; ./configure --with-ncurses; make

   For additional hints and help, try this URL:

     http://invisible-island.net/xterm/xterm.faq.html#no_color

  Visual matching (VM)

   All hosts support visual-matches mode, which highlights search text with
   either a simple color (no modifiers) or a display attribute. To see the
   list of supported colors and attributes, type:

     :set visual-matches=<tab><tab>

   To learn more about this mode, search for "visual-matches" elsewhere in
   this help file.

  Foreground color (FC)

   On hosts and display hardware that support it, the editor's foreground
   color may be set to a simple color value (no attribute modifiers allowed).
   Type:

     :set fcolor=<tab><tab>

   for a list of supported colors.

  Background color (BC)

   On hosts and display hardware that support it, bcolor mode sets the
   editor's background color. Bcolor utilizes the same color list as fcolor.

  Attribute control sequences (ACS)

   A buffer may be manually or programmatically encoded with strings that
   cause the editor to render text in arbitrary color/attribute sequences.
   For example, consider the following data:

         ^A3C1:red text, ^A4B:bold text

   Given a suitable command, vile will render this as:

         <begin red>red<end red> text, <begin bold>bold<end bold> text

   It's possible to mix colors and attribute as well:

         ^A8BC1:bold red text

   which is rendered as:

         ^A8BC1:<begin bold&red>bold red<end bold&red> text

   These sequences are the building blocks of syntax coloring. For a more
   detailed discussion of attribute control sequences, refer to the topic
   "Writing your own filters" in this help file.

  Syntax coloring (SC)

   vile colors a buffer via these steps:

    1. an external filter (e.g., vile-c-filt) is run and subsequently reads
       an optional keywords file and a color specification file. The latter
       maps classes of language keywords/elements to user-specified colors
       and display attributes.
    2. the filter reads the buffer being colored from stdin and encodes
       language keywords/elements with attribute control sequences.
    3. the filter writes its results to stdout, which vile reads back and
       uses as control information to color the buffer.
    4. the editor redraws its display, appropriately rendering all
       attribute-encoded keywords (e.g., "if", "while") and other syntactic
       elements (e.g., strings and numbers), based on the information
       embedded in the filter's output.

  Host capability matrix

   +------------------------------------------------------------------------+
   |Color Feature |VMS     |VMS    |DOS|OS/2|Win32  |Win32  |Unix   |Unix   |
   |              |(std)   |(GUI)  |   |    |(std)  |(GUI)  |(std)  |(GUI)  |
   |--------------+--------+-------+---+----+-------+-------+-------+-------|
   |Visual        |Y       |Y      |Y  |Y   |Y      |Y      |Y      |Y      |
   |Matching      |        |       |   |    |       |       |       |       |
   |--------------+--------+-------+---+----+-------+-------+-------+-------|
   |Foreground    |N       |Y      |Y  |Y   |Y      |Y      |[2]    |Y      |
   |Color         |        |       |   |    |       |       |       |       |
   |--------------+--------+-------+---+----+-------+-------+-------+-------|
   |Background    |N       |Y      |Y  |Y   |Y      |Y      |[2]    |Y      |
   |Color         |        |       |   |    |       |       |       |       |
   |--------------+--------+-------+---+----+-------+-------+-------+-------|
   |Attr.         |Y       |Y      |Y  |Y   |Y      |Y      |[3]    |Y      |
   |Sequences     |        |       |   |    |       |       |       |       |
   |--------------+--------+-------+---+----+-------+-------+-------+-------|
   |Syntax        |N       |N      |N  |[1] |Y      |Y      |[3]    |Y      |
   |Coloring      |        |       |   |    |       |       |       |       |
   +------------------------------------------------------------------------+

   Note 1: vile's filter mechanism blocks (hangs) when processing "large"
   buffers. Consequently, syntax coloring is not recommended, except if one
   could use the builtin-filters configuration.

   Note 2: Requires a terminfo terminal type that supports color.

   Note 3: If a terminal type supporting color is unavailable, then
   "coloring" is limited to the use of attributes like bold, underline, etc.


Syntax coloring
---------------
   vile's source distribution includes an extensive set of filters that color
   many languages and text file formats, including (but not limited to):

   C/C++, Java, Perl, HTML, shell scripts

   Filters come in two flavors: builtin and external. Builtin filters are
   bound directly into the editor and invoked via function calls. External
   filters are standalone executables invoked via a pipe and typically named
   "vile-xxx-filt", where "xxx" denotes the target text/language. Note that
   "xxx" is usually the same name assigned to vile's corresponding builtin
   filter and "majormode" (there are some exceptions). The following table
   lists example paired filter and majormode names:

   +------------------------------------------------------------------------+
   | Language Name | Builtin       | External Filter Name  | Majormode      |
   |               | Filter Name   | [1]                   | Name[2]        |
   |---------------+---------------+-----------------------+----------------|
   | C             | c             | vile-c-filt           | cmode          |
   |---------------+---------------+-----------------------+----------------|
   | HTML          | html          | vile-html-filt        | htmlmode       |
   |---------------+---------------+-----------------------+----------------|
   | Perl          | pl            | vile-pl-filt          | perlmode       |
   |---------------+---------------+-----------------------+----------------|
   | sh            | sh            | vile-sh-filt          | shmode         |
   +------------------------------------------------------------------------+

   For a complete listing of all filters and supported languages and text
   file formats, refer to the file doc/config.doc in the editor's source
   distribution.

   [1] Whether the editor uses builtin or external filters depends solely
   upon configuration options specified when the editor is compiled and
   linked (see doc/config.doc for details). As you might expect, builtin
   filters offer faster syntax coloring at the cost of a larger editor
   executable. For the purposes of this document, it's assumed that the
   editor is bound with builtin filters.

   [2] Majormodes are an interesting subject in their own right, but won't be
   discussed much within the context of syntax coloring. For more info, refer
   to the help topic "Majormodes" in this help file, as well as the file
   doc/modes.doc.

   [3] Previous releases of vile utilized a syntax filtering system that
   actually applied color attributes to a target buffer, thereby damaging the
   editor's undo history. vile version 8.3 (and later) utilizes a new
   command, called "attribute-from-filter-til", which applies coloring
   information directly from the filter's output stream without modifying the
   affected buffer.

   The remainder of this section of the help file includes a step-by-step
   description of syntax coloring configuration, as well as pointers to
   related features.

  Prerequisites

     * be familiar with the help topic entitled "Color basics".
     * ensure the target host supports syntax coloring.
     * if on a Unix host, compile and link the editor from the source
       distribution. This step is optional on a win32 host, as precompiled
       binaries (editor and filters) are available from
       ftp://invisible-island.net/vile/ . Note that almost all filters
       require preprocessing with flex (not a standard Windows tool) prior to
       compilation.

  Configuration

   There are three configuration recipes, each dependent on the target host
   and/or the user's privilege level.

  Unix install recipe - root privileges available

   The simplest install copies the editor to a directory in the system PATH
   (we'll assume /usr/local/bin), and copies all syntax coloring data and
   macro files to /usr/local/share/vile. The following commands accomplish
   that task:

     unset VILE_STARTUP_PATH VILE_LIBDIR_PATH
     make clean; ./configure --with-builtin-filters; make
     make install

   Users should take these additional steps:

   1) add the following to their $HOME/.vilerc startup files:

     source "filters.rc"

   2) execute these shell commands (as necessary):

     mkdir $HOME/.vile
     cp /usr/local/share/vile/vile.keywords $HOME/.vile

   That's it. Now skim through the "Manual recipe" topic below and then pay
   attention again when you hit the topic entitled "Testing the
   configuration". With regard to the remainder of this discussion, the term
   "COLORDIR" refers collectively to the list of directories where vile
   searches for keyword files. This is the list:

     * the current directory
     * the home directory
     * the vile subdirectory of the home directory
     * the directories listed in $startup-path.

   When searching directories which it does not "own;", vile looks for the
   filename with a leading ".;". The which-keywords macro illustrates this
   best, e.g.,

     which-keywords cmode

   produces this output in the [Which Keywords] buffer:

         Show which keyword-files are tested for:
                 cmode
         (* marks found-files)

         $cwd
           ./.c.keywords
         $HOME
           ~/.c.keywords
           ~/.vile/c.keywords
         $startup-path
         * /usr/share/vile/c.keywords

  Unix install recipe - no privileges

   The simplest install copies the editor and all data and macros file to a
   writable directory tree (we'll assume $HOME/local). This syntax does the
   job:

     unset VILE_STARTUP_PATH VILE_LIBDIR_PATH
     make clean
     ./configure --prefix=$HOME/local --with-builtin-filters
     make
     make install

   These additional steps are required:

   1) add the following to the $HOME/.vilerc startup file:

     source "filters.rc"

   2) execute these shell commands (as necessary):

     mkdir $HOME/.vile
     cp $HOME/local/share/vile/vile.keywords $HOME/.vile

   3) add $HOME/local/bin to $PATH (if not already specified)

   That's it. Now skim through the "Manual recipe" topic below and then pay
   attention again when you hit the topic entitled "Testing the
   configuration". With regard to the remainder of this discussion, the term
   "COLORDIR" refers collectively to the directories $HOME/.vile or
   $HOME/local/share/vile as appropriate.

  Manual Recipe - Win32 host

   You may choose to not use the winvile install/setup program, or else you
   may be installing console Win32 vile. In either case, you can always
   manually configure vile for Win32. For the purposes of this discussion, it
   is assumed that the editor is not built from sources, but instead obtained
   from precompiled binaries, as described next.

   1) create a directory (hereafter referred to as COLORDIR) to store the
   editor's external color keyword and macro files. Example COLORDIR name:
   c:\util\vcolor

   2) obtain these two distributions:

     ftp://invisible-island.net/vile/filters.zip
     ftp://invisible-island.net/vile/vile-w32.zip

   3) extract the contents of filters.zip into COLORDIR.

   4) extract the contents of vile-w32.zip into a temp directory. From within
   this temp directory:

   a) copy *.rc to COLORDIR. Note that the most important of these files is
   filters.rc .

   b) copy vile.exe, vile.hlp, and winvile.exe to a directory in your PATH.
   Note that vile.exe and winvile.exe are both bound with _all_ of the
   editor's builtin filters.

   5) edit your startup file (vile.rc) and add this line:

     source "filters.rc"

   6) export these environment variable settings:

         VILE_STARTUP_PATH=COLORDIR
         VILE_LIBDIR_PATH=COLORDIR

   Example entries in Win9x/ME's autoexec.bat:

     SET VILE_LIBDIR_PATH=c:\util\vcolor
     SET VILE_STARTUP_PATH=c:\util\vcolor

   On a Win/NT/2K host, env vars are initialized via a control panel applet.
   WinXP uses a different mechanism.

  Testing the configuration

   Basic configuration is now complete. Filters.rc installs several stored
   procedures, including:

   +------------------------------------------------------------------------+
   | Macro Name         | Binding | Function                                |
   |--------------------+---------+-----------------------------------------|
   | HighlightFilterMsg | ^X-q    | Colors the current buffer if a          |
   |                    |         | majormode and filter exist for same.    |
   |--------------------+---------+-----------------------------------------|
   | HighlightClear     | ^X-Q    | Clears the current buffer's color       |
   |                    |         | attributes.                             |
   |--------------------+---------+-----------------------------------------|
   | set-highlighting   | <none>  | Attach a major mode to a buffer and     |
   |                    |         | re-color same. More about this below.   |
   +------------------------------------------------------------------------+

   For a simple go/no-go test, do:

     * edit a C source file
     * examine the editor's modeline and ensure that "[cmode]" is in effect
     * type ^X-q

   If all is well, various elements of the C program will be
   highlighted/colored. You may not particularly care for the color
   attributes chosen, but that's configurable (keep reading :-) ). If nothing
   happened, skip down to the troubleshooting section.

  Read-hook

   Typing ^X-q each time a new file is opened gets old after awhile. To force
   the editor to take over this task, add this line to your startup file:

     setv $read-hook HighlightFilterMsg

   This setting initiates syntax coloring whenever a new file is edited.
   However, note that the read-hook won't initiate syntax coloring when a
   buffer's contents change, which brings us to the next topic.
   HighlightFilterMsg is a wrapper for the macro HighlightFilter, which adds
   a message saying that it is updating attributes. If you prefer no
   messages, use HighlightFilter.

  Autocolor

   It's possible to automatically initiate syntax coloring when the editor
   detects no active input during a user-configurable interval. If this
   sounds appealing, add the following to your startup file:

     ; change autocolor mode value to suit individual tastes
     set autocolor=2000
     setv $autocolor-hook HighlightFilterMsg

   These settings initiate an automatic syntax coloring check whenever 2
   seconds of idle time elapses (autocolor's argument is scaled in
   milliseconds). Note that autocolor won't actually invoke a syntax filter
   unless it detects a modified buffer.

   To disable this feature, set autocolor to 0 (zero).

   Note that "autocolor" is a buffer mode and as such, can be enabled
   globally, but disabled for one or more buffers where coloring is
   inappropriate. That is, type ":setl autocolor=0" to disable the automatic
   syntax coloring for a particular buffer.

   For obvious reasons, this feature is less "intrusive" on fast hardware.
   Even on fast hardware, running an external syntax filter can be a little
   slow. The built-in filters run much faster, fast enough that this
   combination is not that intrusive. The filters.rc script checks if vile
   has built-in (or loadable) syntax filters and will turn on autocolor and
   the $read-hook automatically in this case (with a 5 second idle time).
   Depending on the speed of your hardward, you may wish to make this
   shorter.

   If autocolor is too slow, you can temporarily disable it by turning the
   highlighting mode off:

     :set nohl

  Changing color/attribute mappings

   Filters will color text based on the contents of the file
   COLORDIR/vile.keywords . This file's configuration syntax is described in
   detail in doc/filters.doc. We'll hit the high points here:

     * a line that begins with ':' is a comment
     * language elements are grouped into classes, each of which is assigned
       a color, using this syntax:

     .class <name>:<ACS>

   where:

         <name>      ::= an arbitrary alphanumeric string.
         <ACS>       ::= { C<hexdigit> | U | I | B | R }
         C<hexdigit> ::= internal vile color name
           U         ::= underline attribute
           I         ::= italic attribute
           B         ::= bold attribute
           R         ::= reverse attribute

   An example keyword file might contain:

     .class Action:BC2
     .class Comment:BC1
     .class Error:CA
     :.class Ident:R
     .class Ident2:C6
     .class Keyword:C3
     .class Keyword2:BC1
     .class Literal:UC5
     .class Number:C6
     .class Preproc:C2
     .class Type:CD

   The "Comment" class defines the color attribute applied to a language's
   comments, which will be rendered in "B"old "C"olor "1". "Literal" applies
   to string literals, which will be shown as "U"nderlined "C"olor "5".
   "Keyword" applies to a language's reserved words (e.g., "if", "while",
   "break"), which will be encoded as "C"olor "3". And so forth. Note that
   few filters use all of the classes listed in this file.

   As should be obvious at this point, color configuration is effected by
   editing vile.keywords and applying individual tastes and preferences.

   For completeness sake, it should be noted that the mapping of language
   tokens (e.g., "int", "static", "while") to vile.keyword's generic classes
   occurs in the individual language-specific keyword files. In general, a
   language-specific keyword file (e.g., COLORDIR/awk.keywords,
   COLORDIR/perl.keywords, COLORDIR/c.keywords) provides only part of the
   filter's behavior - much of its action is encoded in its source, which for
   most filters is written in "flex". It is not expected that users will need
   or want to edit these files.

  Caution: vile.keywords is a precious file

   From time to time, users upgrade to the latest release of vile. If the
   above syntax coloring configuration and installation instructions are
   blindly repeated during an upgrade, your copy of vile.keywords will be
   overwritten with the corresponding file from vile's distribution. This is
   not a happy event if you've spent time tweaking this file to suit your
   tastes (the author speaks from experience). Word to the wise:

   Once vile.keywords is edited to your satisfaction, make a backup copy
   and/or save it under version control!

  Troubleshooting

   Try this checklist when syntax coloring doesn't work:

     * Does your display hardware and/or host support color? Type
       ":show-colors" to list current capabilities. If colors/attributes
       appear to be missing, reread the "Color basics" topic in this help
       file.
     * Win32 users should ensure that these environment vars are properly
       initialized:

         VILE_STARTUP_PATH
         VILE_LIBDIR_PATH

     * Your startup file should include these lines:

         source "filters.rc"      ; quotes matter on win32 hosts
         setv $autocolor-hook HighlightFilterMsg
         setv $read-hook HighlightFilterMsg
         set autocolor=2000

     * Some users have made the mistake of explicitly specifying a filter via
       the filtername mode. Don't do that.

  Attaching/Forcing a buffer's majormode

   For the most part, when vile visits a file, the correct majormode is
   attached to the file's buffer and appropriate syntax coloring ensues. But
   there are times when vile may choose the wrong majormode and/or not
   specify one at all (the latter case most likely occurs when the file's
   suffix doesn't match any of the possibilities listed in filters.rc). The
   result is either inappropriate or _no_ highlighting. In this situation,
   use the "set-highlighting" macro to explicitly specify the desired
   majormode.

   For example, suppose I'm editing an older copy of a C++ source file called
   main.cpp, which has been renamed to main.cpp.old . In this scenario, vile
   will not attach a majormode to main.cpp.old's buffer and consequently will
   not color the buffer. To set the proper majormode and force syntax
   coloring, simply type:

     :set-highlighting cpp

  Man pages

   It's also possible to syntax color Unix man pages, although the procedure
   is not tied to a majormode. Refer to the help topic entitled 'Filtering
   "man" pages' for further information.

  Spell checking (Unix hosts only)

   The editor is capable of spell checking the current buffer (with ispell)
   and subsequently highlighting all misspelled words in the Keyword class
   color (as specified in vile.keywords). If this feature sounds useful, then
   add this line to your startup file:

     source "spell.rc"

   Spell.rc installs ^X-i as the keybinding that initiates spell checking.

  Further reading

   More information on syntax coloring can be found in the file
   doc/filters.doc, in the vile source directory.


Setting Extra Colors
--------------------
   Syntax highlighting applies to buffers which are loaded from files. vile
   can also generate buffers to show its internal state. Those can be colored
   using the "extra colors" feature. The feature is called "extra colors"
   both because these are colors not set via syntax filters, but also because
   it allows color and attribute combinations not available via the normal
   mode setting mechanism.

   The show-extra-colors command shows the types of things that can be
   colored, along with their current state, e.g.,

         enum             default
         hypertext        default
         isearch          default
         linebreak        default
         linenumber       default
         modeline         reverse
         number           default
         regex            default
         string           default
         warning          default

   The set-extra-color command sets the colors. It prompts for the name of a
   type, followed by a combination of color and attributes. Use '+' to join
   the color and attributes. These are possible commands for setting isearch
   (the highlighting used for incremental search):

     set-extra-color isearch reverse
     set-extra-color isearch reverse+blue
     set-extra-color isearch blue+reverse
     set-extra-color isearch blue+reverse+underline
     set-extra-color isearch red

   Here is an example of how the various extra colors might be used:

     ~if &sge &cat $version $patchlevel 'version 9.7f'
     ~with set-extra-colors
             isearch blue+underline
             hypertext underline+red
             modeline reverse+green
             string magenta
             regex underline+magenta
             number cyan
             enum green
     ~if &sge &cat $version $patchlevel 'version 9.7m'
             warning reverse+bold+red
     ~endif
     ~endwith


Majormodes
----------
   Prior to studying majormodes, it helps to be familiar with the "Editor
   modes" and "Syntax coloring" topics.

   Majormodes are collections of buffer mode values that vile automatically
   assigns to new buffers. When the vile distribution file "filters.rc" is
   sourced, it in turn sources "modes.rc", which subsequently defines a
   significant number of majormodes for various programming languages and
   file formats. The majormode assigned to a particular buffer is dependent
   upon two criteria, in the following priority order:

    1. the suffix of the file being edited, and
    2. the file's preamble (i.e., file's first line).

   Both suffix and preamble are expressed as regular expressions and examples
   of each are readily available in modes.rc . Speaking of modes.rc, it
   becomes obvious from browsing this file that most majormode buffer
   settings involve specifying appropriate regex patterns for fences and
   comments.

   The syntax for defining a new majormode or overriding an existing
   majormode is quite rich and fully described in the file doc/modes.doc.
   Rather than regurgitating the contents of that file here, we'll hit the
   high points with a couple of examples.

   To define a new majormode, add this in your vile startup file:

     define-mode <new_majormode_name>
     ~with define-submode <new_majormode_name>
             mode-pathname  "<regexp_pattern>"       ; see next para
             mode-filename  "<regexp_pattern>"       ; see next para
             suffixes       "<regexp_pattern>"       ; see next para
             preamble       "<regexp_pattern>"       ; see next para
             before         "<if necessary>"
             filtername     "<syntax-coloring-filter>"
             buffer mode setting#1
             buffer mode setting#2
     ; etc.
     ~endwith

   Selecting file(s) for inclusion within a majormode is a matter of
   specifying an appropriate regular expression, like so:

   +-----------------------------------------------+
   | regexp mode name | selection based on         |
   |------------------+----------------------------|
   | mode-pathname    | any file component in path |
   |------------------+----------------------------|
   | mode-filename    | leaf filename              |
   |------------------+----------------------------|
   | suffixes         | .<file_suffix>             |
   |------------------+----------------------------|
   | preamble         | first line of file         |
   +-----------------------------------------------+

   One or more of these regular expressions may be specified within a
   majormode definition, with selection precedence given in the order listed
   above.

   As an actual example, suppose someone wanted to edit this help file and
   subsequently submit patches to vile's developers. In the spirit of
   cooperation, the developers would appreciate changes that were made with
   the same tabstops and tab insertion policies as used in the existing help
   file (vile.hlp). Taking a peek at vile.hlp, it can readily be seen that
   physical tabs are indeed used, with stops apparently set at intervals of
   8. Also, it appears that the right margin is set fairly close to 80. To
   mirror this policy, create this new majormode:

     define-mode hlp
     ~with define-submode hlp
             suf '\.hlp$'
             ts=8
             fillcol=77
             tabinsert
             filtername 'vile-txt-filt'
     ~endwith

   Now, whenever a file with suffix ".hlp" is edited, it will be colored with
   vile-txt-filt and physical tabs inserted at multiples of 8.

   To override or augment the buffer mode settings of an existing majormode,
   do this in your startup file:

     source "filters.rc"
     ; ...
     define-mode <existing_majormode_name>
     ~with define-submode <existing_majormode_name>
             changed buffer mode setting#1
             changed buffer mode setting#2
             ; etc.
     ~endwith

   For example, suppose it was desirable to edit all text files with
   ignorecase disabled. This startup file snippet will suffice:

     source "filters.rc"
     ; ...
     define-mode txt
     ~with define-submode txt
             ignorecase
     ~endwith

   Once associated, majormode submodes can be setl/unsetl just like regular
   local buffer modes. But note well that set/unset have no effect on
   submodes. So, when hlpmode is in effect, this command works:

     setl notabinsert

   but this command has no effect:

     set notabinsert

   As added syntactic sugar, majormode submodes may be prefixed with the
   majormode name and changed like so:

     set/setl     txt-ignorecase
     set/setl     hlp-fillcol=60
     unset/unsetl txt-ignorecase
     unset/unsetl hlp-tabinsert

  Notes

   1) Use the command "show-majormodes" to display the list of majormodes and
   their associated submodes.

   2) Only one majormode can be set for a buffer.

   3) To override the majormode that vile assigns to a buffer, use either the
   set-highlighting macro (defined in filters.rc) or the "setl
   <majormode_name>" command. Example:

     setl cppmode     ; <-- force cppmode for current buffer

  Distinguishing between C/C++ include files

   Both C and C++ use ".h" as an include file suffix. vile's current
   majormode definitions favor "*.h" for inclusion in cmode (not cppmode),
   which is not desirable for C++ programmers and/or a C++ project. There are
   two workarounds:

   1) On a project-by-project basis (i.e., developer does not devote all of
   his/her time to C++ coding), simply add something like this to the vile
   startup file:

     source "filters.rc"
     ; ...
     define-mode cpp
     ~with define-submode cpp
             mode-pathname 'project_root_directory_name/.*\.h$'
     ~endwith

   This change specifies that all "*.h" files beneath a root directory name
   are presumed to be C++ files.

   2) If coding C++ more than C, then make these changes:

     source "filters.rc"
     ; ...
     define-mode cpp
     ~with define-submode cpp
             suffixes        '\.\(C\|CC\|cc\|cpp\|cxx\|hxx\|h\|hh\)$'
     ~endwith

   This change adds ".h" to the list of C++ files and since vile tests
   cppmode before cmode, all "*.h" files will now be edited in cppmode.

  cmode: the original vile builtin majormode

   Long before Tom Dickey added majormodes to vile, there existed "cmode", a
   feature that included its own builtin tab settings and indentation style
   (still available today as "cindent"). This older version of cmode served
   as the precursor for vile's current majormode system.

   Today, even if filters.rc is not sourced at runtime, vile includes a
   builtin majormode called cmode that is defined internally like so:

     define-mode c
     ~with define-submode c
             ts=8
             sw=8
             cindent
             cindent-chars ":#"
             suffix "<complex_regexp_for_c_c++_file_suffixes>"
             filtername 'vile-c-filt'
     ~endwith

   This builtin majormode can produce some surprising results when editing C
   source files. In particular:

     set ts=<val>   ; <-- has no effect, use "setl" instead

   What's more these settings may be anathema for the coding style in effect
   for a given software project. Override these settings in the vile startup
   file to suit your needs/taste, like so:

     define-mode c
     ~with define-submode c
             ts=4
             sw=4
             nocindent
     ~endwith


Filtering "man" pages
---------------------
   When used in conjunction with the vile-manfilt program (supplied as source
   file filters/manfilt.c), either vile or xvile may be used to filter and
   view manual pages. xvile will even display (with your font set properly)
   certain portions of the manual page text in bold or italics as
   appropriate.

   The file macros/manpage.rc (found in the vile source directory, with
   portions copied below) contains a macro which is bound to ^X-m. It will
   prompt for a manual page, filter it, attach attributes and display it in
   the current window. The text of manpage.rc may be either incorporated
   verbatim into your .vilerc file or may be read from your .vilerc as
   follows:

     source "manpage.rc"

   This assumes that you have moved the manpage.rc file to a directory known
   to vile (automatically handled by "make install" on Unix or,
   alternatively, by pointing the VILE_STARTUP_PATH env var to the directory
   where this file resides). If you do all of this but use vile rather than
   xvile, you will still end up with a legible man page, albeit without the
   spiffy formatting.

   The manual page filtering program may also be used to look at other text
   formatted with nroff. From the vile source directory, for example, the
   following command will format and filter the vile manual page (which is
   nroff source).

     :e !nroff -man vile.1 | vile-manfilt

   Once loaded, it will look rather funny. There will be Cntl-A characters
   scattered throughout the text followed by a sequence of digits followed by
   one or more uppercase letters followed by a colon. These Cntl-A sequences
   specify how the text following the colon should be attributed. The vile
   command "attribute-cntl_a-sequences-til" (bound to ^A-A) may be used to
   format a region of text containing these sequences. To continue our
   example, the following command will translate this representation of
   attributed text into one which is more pleasing to look at.

         ^A-AG

   Note that macros/manpage.rc also provides a macro that attaches attributes
   to any man page displayed in the editor's current buffer.


Working in a project hierarchy
------------------------------
   vile includes several features that enable quick access to many files
   spread over a directory hierarchy, as described below.

  Directory navigation

   vile provides several commands that manipulate an internal directory
   stack:

         :dirs
         :dirs-add   dir
         :dirs-clear
         :popd       [ {+|-}n ]
         :pushd      [ dir | {+|-}n ]

   dirs
           lists the directory stack in a scratch buffer. Note that the
           directory stack is zero-based. Precede this command with an
           argument to kill the buffer. "dirs-clear" clears the stack and
           kills the scratch buffer. "dirs-add" adds a directory to stack[top
           - 1], but does not affect cwd, which makes this command useful for
           initializing the stack from a macro or startup file.

   popd
           removes entries from the directory stack. With no arguments,
           removes the top directory from the stack and performs a cd to the
           new top directory.

                +n
                        removes the nth entry counting from stack top.

                -n
                        removes the nth entry counting from stack bottom.

   pushd
           adds a directory to the top of the directory stack or rotates the
           stack, making the new top of the stack the current working
           directory. pushd honors CDPATH, when set. With no arguments, pushd
           exchanges the top two directories. Otherwise:

                +n
                        rotates the stack so that the nth directory, counting
                        from stack top, is at the top.

                -n
                        rotates the stack so that the nth directory, counting
                        from stack bottom, is at the top.

                dir
                        adds dir to the directory stack at the top, making it
                        the new current working directory.

   If pushd or popd is successful, a "dirs" is performed as well.

  Hierarchical tags

   Assume the following directory hierarchy:

                root
               /  |  \
              /   |   \
            lib  src  include

   Assume also that most of the development work takes place in the "src"
   directory and that this is a C/C++ project.

   Once an appropriate tags file has been created in the src directory (using
   the ctags program), vile's tags interface provides quick access to the
   most frequently modified project files. But what about the source files in
   the "lib" and "include" directories? Is it possible for vile's tags
   interface to access the C/C++ files in the aforementioned directories when
   the editor's cwd is set as "src"? The answer is an emphatic "Yes". This
   can be done using at least two different mechanisms.

  Exuberant ctags

   Assuming the Exuberant Ctags program is available (written by Darren
   Hiebert), the simplest method is as follows:

   1) cd to the project root dir and issue this ctags command:

     ctags -R . '*.[ch]' '*.cpp'

   This command drops out a tags file in the root directory that includes
   tags for all three subordinate directories. Repeat this step as necessary
   whenever significant changes are occur within the project hierarchy.

   2) modify the vile startup file (vile.rc or .vilerc) to include this
   setting:

     set tagrelative
     set tags="../tags"

   vile's tags lookup features now provide one-keystroke access to symbols in
   _all_ project source files, provided that the editor's current working
   directory is set as either src, include, or lib.

   It's important to note that Exuberant Ctags has been ported to many hosts
   (including VMS) and supports many languages other than C.

  Standard ctags

   Use this recipe when working with the standard ctags program (available on
   virtually all Unix hosts):

   1) cd to the project root dir and issue this ctags command:

     ctags src/*.[ch] src/*.cpp lib/*.[ch] lib/*.cpp include/*.h

   this command drops out a tags file in the root directory that includes
   tags for all three subordinate directories. Repeat this step as necessary
   whenever the lib or include directory contents change.

   2) modify the vile startup file (vile.rc or .vilerc) to include this
   setting:

     set tagrelative
     set tags="../tags"

   This method achieves the same one-keystroke symbol access as described for
   Exuberant Ctags.

  File/Directory traversal (win32/Unix hosts only)

   vile's capture-command (bound to ^X-!) includes an interface to the Unix
   find command (or equivalent clone) that permits the user to access a large
   number of files or directories spread across an arbitrarily complex
   hierarchy. This feature requires a small amount of configuration before it
   can be used.

   To begin with, specify a directory hierarchy via the $findpath state
   variable using this syntax:

     setv $findpath="<dir>[<delim><dir>]..."

   where <delim> is ':' on a Unix host and ';' on a win32 host. If this state
   var is not set, "." is assumed.

   Next, use find-cfg mode to enable the traversal feature. This mode's
   string argument syntax is as follows:

     [<recursive_token>][,<nonrecursive_token>[,<option>...]]

   where:

         <recursive_token> := an ascii character that triggers a
                             recursive find.  The selected token may
                             not be taken from the character set
                             defined by isalpha().  To use ',' as a
                             token, escape it with '\'.

         <nonrecursive_token> := an ascii character that triggers a
                                nonrecursive find-shares the same
                                semantic restrictions as the
                                recursive token.

         <option>          := {d | f}

   Note 1: The "d" option specifies that find should restrict its search
   solely to files of type "d" (i.e., directories). The "f" option adds a
   "-follow" operand to the commandline, which directs find to follow
   symbolic links. Note that -follow is appropriate for the GNU tool chain,
   SunOS v5.7, and possibly other hosts. Check your local find (1) man page
   for compatibility.

   Note 2: An empty string argument disables find-cfg mode.

   Note 3: Most versions of find do _not_ support nonrecursive operations.
   The one known exception is GNU's find.

  Examples (file traversal)

   Assume the same project hierarchy as was used in the description of
   "Hierarchical tags" above. Assume also that the path to the project root
   is /local/proj/root and that the vile startup file contains these
   settings:

     setv $findpath="/local/proj/root"
     set find-cfg="$,@"

   Then consider this command:

     ^X-!$egrep -n FIXME *.[ch] *.cpp

   which spawns this Unix shell command:

     find /local/proj/root '(' -name '*.[ch]' -o -name '*.cpp' ')' \
             -print | egrep -v '((RCS|CVS)/|/[Tt][Aa][Gg][Ss]$)' | \
             xargs egrep -n FIXME

   and this win32 shell command:

     find /local/proj/root '(' -iname '*.[ch]' -o -iname '*.cpp' ')' \
             -print | egrep -vi '((RCS|CVS)/|/tags$)' | \
             xargs egrep -n FIXME

   The net result is that capture-command has been used to find the string
   FIXME in all C/C++ source files located in the project hierarchy. The
   results of this search are placed in the editor's [Output] buffer. Each
   occurrence of the string can be accessed via the error finder's ^X-^X
   binding. Note that the above shell commands are crafted to ignore files
   stored in RCS/CVS directories and to ignore the files created by ctags.

   If it's preferable to use a nonrecursive find operation and the GNU find
   utility is available on your host, you might try this on a Unix host:

     setv $findpath="/dir1:/dir2:/dir3"
     set find-cfg="$,@"
     ^X-!@egrep -ni copyright *.txt

   which spawns this Unix shell command:

     find /dir1 /dir2 /dir3 -maxdepth 1 -name '*.txt' -print | \
             egrep -v '((RCS|CVS)/|/[Tt][Aa][Gg][Ss]$)' | \
             xargs egrep -ni copyright

   Or, correspondingly, on a win32 host:

     setv $findpath="/dir1;/dir2;/dir3"
     set find-cfg="$,@"
     ^X-!@egrep -ni copyright *.txt

   which spawns this win32 shell command:

     find /dir1 /dir2 /dir3 -maxdepth 1 -iname '*.txt' -print | \
             egrep -vi '((RCS|CVS)/|/tags$)' | xargs egrep -ni copyright

   Of course, if your version of find doesn't support the "-maxdepth" option,
   this feature won't work. The workaround is simple-upgrade to the GNU
   version of find.

  Examples (directory traversal)

   Suppose all you really desire is access to the names of the directories
   embedded within a project hierarchy. This might be useful for Perl hackers
   who want to manipulate a directory's contents with specialized scripts. To
   obtain this functionality, specify find-cfg's "d" option. As a contrived
   example:

     setv $findpath="/local/proj/root"
     set find-cfg="$,@,d"
     ^X-!$ls -ld

   yields this shell command (on a Unix host):

     find /local/proj/root -type d -print | egrep -v '(RCS|CVS)/' | \
             xargs ls -ld

  File/directory traversal notes

     * An astute win32 user will note that the above traversal examples rely
       on utilities (find, egrep, and xargs) that aren't available by default
       on a win32 host. This problem can be readily remedied by installing
       the cygwin emulation package, which includes a large number of fully
       functional GNU tools. Cygwin can be obtained from Redhat at
       http://www.sourceware.org/cygwin/.
     * The most recent file/directory traversal shell command created via
       capture-command is stored in the $find-cmd state variable. This can be
       a useful debugging aid.
     * The $findpath state variable inherits its initial value, if any, from
       the VILE_FINDPATH environment variable.


Writing your own filters
------------------------
   Filters may be written as either an external program or with the Perl
   interface. Both the manual page filter and the C program colorizer are
   examples of external programs which do the filtering. The hgrep.pm perl
   script is an example of a filter which uses the vile's interface to Perl.

   Regardless, the goal of the filter is to embed in the text a control
   sequences which describe how the subsequent text should be attributed by
   the vile command

         attribute-cntl_a-sequences-til

   or, preferably

         attribute-from-filter-til

   (See above for examples of how to use this command.)

   The control sequences take the following form:

         ^A<Count><Attr>:

   <Count> is a sequence of digits representing the number of characters
   following the ':' to be attributed.

   <Attr> is a sequence of characters which indicates how to attribute the
   required number of characters following the ':'. The following sequences
   are recognized by vile:

         I               -- italic
         B               -- bold
         R               -- reverse (or inverse) video
         U               -- underline
         C<hex digit>     -- color number (one of 16)
         H<command>\0     -- hypertext command
         M<command>\0     -- meta information (ignored)

   The <command> for hypertext commands may be any sequence of characters
   except for newlines and null characters. A null character must terminate
   the hypertext command. The command should be a valid vile command such as
   you might enter into your .vilerc file.

   The attribute characters may be used together in any combination. So, for
   example, you could use the following to make some text appear both bold
   and italic:

         ^A15IB:Bold and italic


Hypertext
---------
   Vile does not currently supply a builtin key binding for executing
   hypertext commands. The following macro and key binding will cause the
   space bar to be bound to a macro which will follow a hypertext link when
   the cursor is placed on top of it. If no hypertext link is present, then
   the normal default action of advancing one character to the right is
   taken:

     22 store-macro
             ~force execute-hypertext-command
             ~if  &not $status
             ~force forward-character-to-eol
             ~endif
     ~endm
     bind-key execute-macro-22 ' '

   [ TODO: Maybe we should just add a little bit of code to make this the
   default binding for space bar? Or is some other key binding preferable? In
   any event, it'll only take 7 or 8 lines to do the job... ]

   Here is another example, which gives a choice between following a
   hyperlink, e.g., as embedded in which-source, or showing its content:

     bind-key execute-hypertext-command ^X-z
     bind-key show-hypertext-command ^X-Z

   When using xvile, double clicking on a hypertext link will cause the
   hypertext command to be executed. If no hypertext command is associated
   with the text under the cursor, the default action of selecting the word
   under the cursor will occur instead.


Debugging features
------------------
   popup-msgs
           vile's popup-msgs mode (:se pm) pops up a buffer that displays all
           text written to the editor's message line. This mode, when used in
           conjunction with the write-message command, provides an effective
           mechanism for debugging macros. Type ":se nopm" to disable
           popup-msgs.

   ~trace/$debug
           use vile's builtin macro tracing to see what the macros really do.
           The ~trace command sets the $debug variable, which controls
           whether vile appends to the [Trace] buffer a copy of each line
           executed, the local variables saved/restored and intermediate
           states of expression evaluation. To activate tracing, use:

             ~trace on

           or

             setv $debug true

           To disable tracing, use:

             ~trace off

           or

             setv $debug false

   which-exec <file>
           displays the full path that the editor's shell will use to exec
           <file>.

           Note 1: The list of possible paths is taken from all directories
           specified in $PATH + $libdir-path.

           Note 2: On non-Unix hosts, a file suffix is required (e.g.,
           ":which-exec copy.exe", not "which-exec copy").

           Note 3: Specify a numeric argument to force vile to popup a buffer
           that displays all possible paths (e.g., "2:which-exec fmt").

   which-source <file>
           displays the full path that will be used to source <file>>.

           Note 1: The list of possible paths is taken from the same
           directory hierarchy described in the "Invocation" help topic.

           Note 2: Specify a numeric argument to force vile to popup a buffer
           that displays all possible paths (e.g., "2:which-source
           mymacros.rc").

   For debugging syntax highlighting, the following also are useful:

   which-filter <majormode>
           Prompt for, and display location of filter program.

   which-keywords <majormode>
           Prompt for, and display location of keyword files.

   HighlightFilterMsg ^X-q
           Colors the current buffer if a majormode and filter exist for
           same.

   HighlightClear ^X-Q
           Clears the current buffer's color attributes.


X Window System specifics
-------------------------
   If you are using xvile under X11, the following additions are available:

  Mouse Buttons

   1 -
           Sets cursor position and the start of the selection when mouse
           pointer is positioned in any vile window (but not the message
           line). Clicking on a mode line will set the keyboard focus to the
           corresponding vile window. Double clicking on a mode line will do
           the above in addition to clearing the highlighting associated with
           the current selection.

           Selections may be made by holding button one down and "wiping"
           with the mouse. Release of the mouse button will cause the
           selection to be yanked and made available (if desired) for
           pasting. The region selected may be forced to be rectangular by
           holding the control key down while wiping with button one
           depressed. If the wiping motion goes out of the current window,
           text will be scrolled in the appropriate direction if possible to
           accommodate selections larger than the window. The speed at which
           the scrolling occurs will increase with the passage of time making
           it practical to select large regions of text quickly.

           Individual words or lines may be selected by double or triple
           clicking.

   2 -
           Paste the current PRIMARY selection. With a shift modifier, it
           pastes at the mouse position, otherwise it pastes at the last text
           cursor position before selecting.

   3 -
           Extend the current selection. As with button one, the selection
           may be adjusted or scrolled by holding down button three and
           wiping with it. Selections may be extended in any window open to
           the same buffer as which the selection was started in.

   As described below in the "Scrollbars" section, the buttons are modified
   by the control key as follows, when used on a scrollbar:

   Ctrl-Button-1 splits the clicked-on window into two windows.
   Ctrl-Button-2 deletes the clicked-on window.
   Ctrl-Button-3 makes the clicked-on window the only window.

   Areas of selected text can be operated on with any vile operator command,
   in conjunction with the special "motion" command '^S', which applies the
   operator to the selected region. For example, after selecting text with
   the mouse, it can be converted to uppercase with ^A-u^S. Remember that
   some operators (e.g. the shell-filtering operator, '!') are only capable
   of working on full lines of text.

  Clipboard

   Data may be exchanged between many X applications via the PRIMARY
   selection. This selection is set and manipulated as described in the above
   section entitled "Mouse Buttons".

   Other applications, most notably OpenLook applications, use the CLIPBOARD
   selection to exchange data between applications. On many Sun keyboards,
   selected text is moved to the clipboard by pressing the "Copy" key and
   pasted by pressing the "Paste" key. If you find that you can not paste
   text selected in xvile in other applications or vice-versa, it may well be
   that these applications use the CLIPBOARD selection instead of the PRIMARY
   selection. (The other mechanism used among really old applications
   involves the use of a ring of cut buffers.)

   xvile provides two commands for manipulating with the clipboard. These are
   copy-to-clipboard and paste-from-clipboard. When copy-to-clipboard is
   executed, the contents of the current selection are copied to the special
   clipboard kill register (denoted by ';' in the register list). When an
   application requests the clipboard selection, xvile gives it the contents
   of this kill register. The paste-from-clipboard command requests clipboard
   data from the current owner of the CLIPBOARD selection.

   Users of Sun systems may want to put the following key bindings in their
   .vilerc file in order to make use of the Copy and Paste keys found on
   their keyboards:

     bind-key copy-to-clipboard #-^
     bind-key paste-from-clipboard #-*

  Scrollbars

   The X toolkit version of xvile provides default translations similar to
   the translations for scrollbars found in the Athena widget set. (If you
   know how to use xterm's scrollbars, you know how to use these scrollbars.)
   Button one scrolls forward. Button three scrolls backward. The amount of
   scrolling obtained by these buttons depends on the position at which they
   were pressed on the scrollbar. Clicking near the top of the scrollbar will
   scroll the text by a small amount which may be as little as one line.
   Clicking in the middle will scroll by about half a page. Clicking near the
   bottom will scroll by a larger amount up to a whole page. Holding either
   one of these buttons down will cause repeated scrolling.

   If simply pressed and released, button two will set the position in the
   buffer to a position proportional to the location of the pointer on the
   scroll bar. Button two may be held down to "drag" the slider from one
   place to another causing text to scroll continuously.

   The Motif and OpenLook versions provide scrollbars from their respective
   widget sets. Both versions have a slider indicating the position of the
   window over the buffer. OpenLook's slider is fixed in size with little
   arrows at the top and bottom of the slider. Pressing on one of these
   arrows will cause scrolling in the appropriate direction. The slider may
   be "grabbed" and moved by pressing and dragging the middle portion between
   the arrows. Motif's slider is solid with size varying to indicate the size
   of the window with respect to the size of the buffer. Any portion of it
   may be grabbed for movement. There are little arrows at the top and bottom
   of the scroll bar which may be clicked upon to cause scrolling by one
   line. In both of these widget sets, clicking on the scrollbar either above
   or below the slider will cause scrolling by a full page. OpenLook has two
   additional control areas; the buffer position may be set to either the
   beginning or end of the buffer by pressing on one of the little
   rectangular areas at either the top or bottom of the scrollbar.

   In all versions built with scrollbars enabled, you can resize windows by
   moving the border between corresponding scrollbars (with the mouse). The X
   toolkit version is probably the most functional, with the windows being
   continuously resized as the mouse is moved. The OpenLook and Motif
   versions wait until after a position is selected to resize the windows.
   The OpenLook version is perhaps the least functional; there is no visible
   indication (other than the position of the mouse pointer) to indicate
   where the new border will be.

   Splitting and deleting of windows may also be done with the mouse. In each
   case the action is selected by pressing one of the mouse buttons over a
   scrollbar with the control key held down. Button one (with the control key
   held down) will split the scrollbar and the corresponding vile window with
   the new border at or near the mouse cursor. Button two (with control key)
   will delete the scrollbar and corresponding window. Button three (with
   control key) will make the corresponding window the only window.

  Standard X command line arguments

   +------------------------------------------------------------------------+
   | -fn fontname         | Font to use (or -font).                         |
   |----------------------+-------------------------------------------------|
   | -rv                  | Use reverse video (also -reverse).              |
   |----------------------+-------------------------------------------------|
   | +rv                  | Don't use reverse video.                        |
   |----------------------+-------------------------------------------------|
   | -display disp        | Display to run xvile on.                        |
   |----------------------+-------------------------------------------------|
   | -fg color Foreground | color (or -foreground).                         |
   |----------------------+-------------------------------------------------|
   | -bg color Background | color (or -background).                         |
   |----------------------+-------------------------------------------------|
   | -bd color Border     | color (or -bordercolor).                        |
   |----------------------+-------------------------------------------------|
   | -name name           | Application name used for resource lookups.     |
   |----------------------+-------------------------------------------------|
   | -title name          | Name to be displayed in titlebar.               |
   |----------------------+-------------------------------------------------|
   | -geometry geom       | Initial window dimensions in columns and rows.  |
   |----------------------+-------------------------------------------------|
   | -iconic              | Start xvile iconified.                          |
   |----------------------+-------------------------------------------------|
   | -xrm Resource        | Specify or change an X resource internal to     |
   |                      | xvile.                                          |
   +------------------------------------------------------------------------+

  Additional xvile command line arguments

   +------------------------------------------------------+
   | -class name | Class name used for resource lookups.  |
   |-------------+----------------------------------------|
   | -fork       | to spawn xvile immediately on startup  |
   |-------------+----------------------------------------|
   | +fork       | to force xvile to not spawn on startup |
   |-------------+----------------------------------------|
   | -leftbar    | Put scrollbar(s) on left.              |
   |-------------+----------------------------------------|
   | -rightbar   | Put scrollbar(s) on right (default)    |
   +------------------------------------------------------+

  Setting a new process group

   Some systems and/or some shells and display managers seem to want xvile to
   run in its own process group, to help isolate its signals and actions from
   the signals and actions of the parent process (i.e. the shell or window
   manager that starts xvile). xvile can be forced into its own process group
   with the "new-process-group" command, which one would put in the .vilerc
   file. Using this will cause a call to "setpgrp()" or "setsid()". This
   behavior is not the default because a) it can't be undone, and b) it seems
   undesirable on some systems, in that xvile cannot be suspended and put in
   the background after startup if it's in its own group.

   Additionally, if given a count as argument, this command will cause xvile
   to fork(), and the parent to exit before the new process group is set by
   the child. This will further isolate it from its process environment (and
   in fact will move xvile into the background if started from the shell).

   The "new-process-group" command has no effect in non-X11 versions of vile.

  X Resources

   +------------------------------------------------------------------------+
   | Name                     | Description                                 |
   |--------------------------+---------------------------------------------|
   | font                     | Font to use.                                |
   |--------------------------+---------------------------------------------|
   | geometry                 | Window dimensions in characters.            |
   |--------------------------+---------------------------------------------|
   |                          | Name of icon for decorating window frame.   |
   | iconName                 | If set, this overrides the compiled-in      |
   |                          | pixmap which is used for the window         |
   |                          | manager's hint of the icon pixmap.          |
   |--------------------------+---------------------------------------------|
   |                          | Character classes for multiple click        |
   | charClass                | selections. The format is identical to that |
   |                          | of xterm(1).                                |
   |--------------------------+---------------------------------------------|
   | multiClickTime           | How long between clicks (in milliseconds)   |
   |                          | to be accepted as a multi-click.            |
   |--------------------------+---------------------------------------------|
   | foreground               | Foreground/Background color of the main     |
   | background               | xvile text area.                            |
   |--------------------------+---------------------------------------------|
   |                          | Foreground/Background color of the cursor.  |
   |                          | By default the cursor location is indicated |
   |                          | by inverting the foreground and background  |
   |                          | colors of the cell the cursor is over. Thus |
   | cursor.foreground        | the color of the cursor will vary depending |
   | cursor.background        | upon location. Use of these subresources    |
   |                          | will cause the cursor to maintain constant  |
   |                          | coloration of the user's choosing, and may  |
   |                          | make it easier to see when it appears in a  |
   |                          | "highlighted" or "selected" area of text.   |
   |--------------------------+---------------------------------------------|
   | menuBackground           | (Compile-time optional feature) resources   |
   | menuForeground           | for setting the background and foreground   |
   |                          | colors of menubar and pulldown menus.       |
   |--------------------------+---------------------------------------------|
   | modeline.focusForeground | Foreground/Background color of the mode     |
   | modeline.focusBackground | line corresponding to the window with       |
   |                          | focus, i.e. the "current" window.           |
   |--------------------------+---------------------------------------------|
   |                          | Foreground/Background color of mode lines   |
   | modeline.foreground      | corresponding to windows without the        |
   | modeline.background      | keyboard focus. modeline.background is also |
   |                          | used for the scrollbar borders and resize   |
   |                          | grips.                                      |
   |--------------------------+---------------------------------------------|
   | forkOnStartup            | If true, xvile forks after initialization.  |
   |--------------------------+---------------------------------------------|
   |                          | If true, the "current" window is the window |
   | focusFollowsMouse        | inhabited by the mouse; no clicking is      |
   |                          | necessary to change windows.                |
   |--------------------------+---------------------------------------------|
   | pointer.foreground       | Foreground/Background color of the pointer. |
   | pointer.background       |                                             |
   |--------------------------+---------------------------------------------|
   | pointer.normalShape      | Set the shapes for the normal and watch     |
   | pointer.watchShape       | pointers respectively.                      |
   |--------------------------+---------------------------------------------|
   |                          | Either true or false; control the placement |
   | scrollbarOnLeft          | of the scrollbars. By default, scrollbars   |
   |                          | are placed on the right.                    |
   |--------------------------+---------------------------------------------|
   | scrollbarWidth           | An integer indicating the width of the      |
   |                          | scrollbar.                                  |
   |--------------------------+---------------------------------------------|
   |                          | Foreground/Background color of the slider   |
   |                          | or one of the colors of the slider if a     |
   | scrollbar.foreground     | stippled pixmap is used. To force the       |
   | scrollbar.background     | slider to be only the foreground color, you |
   |                          | should set sliderIsSolid to true. (X        |
   |                          | toolkit version only)                       |
   |--------------------------+---------------------------------------------|
   |                          | If false, indicates that the stippled       |
   |                          | pixmap should be used to simulate grey.     |
   |                          | This will be best on monochrome displays.   |
   | scrollbar.sliderIsSolid  | True works better for color displays. True  |
   |                          | indicates the slider will be displayed in   |
   |                          | the foreground color, shaded to look        |
   |                          | three-dimensional, if possible. (X toolkit  |
   |                          | version only)                               |
   |--------------------------+---------------------------------------------|
   |                          | Amount of time in milliseconds to wait      |
   | scrollRepeatTimeout      | initially before repeating scroll when      |
   |                          | button one or three are held down. (X       |
   |                          | toolkit version only).                      |
   |--------------------------+---------------------------------------------|
   |                          | Amount of time to wait between repeating    |
   | scrollRepeatInterval     | subsequent scrolls. This parameter is also  |
   |                          | used for controlling the speed at which     |
   |                          | selections are scrolled.                    |
   |--------------------------+---------------------------------------------|
   | selection.foreground     | Foreground/Background color of the          |
   | selection.background     | selection regions. "foreground" is the      |
   |                          | color that the text is displayed in.        |
   |--------------------------+---------------------------------------------|
   |                          | If true (the default), highlighting of the  |
   |                          | selection will persist even when button one |
   |                          | is pressed to set the cursor position. A    |
   | persistentSelections     | false value will behave more like other X   |
   |                          | applications in which display of the        |
   |                          | selection is lost as soon as button one is  |
   |                          | pressed.                                    |
   |--------------------------+---------------------------------------------|
   |                          | If false (the default), the cursor will be  |
   |                          | restored to its previous position prior to  |
   |                          | making the selection. If true, the cursor   |
   | selectionSetsDOT         | will be positioned at the location of the   |
   |                          | mouse at the end of making a selection      |
   |                          | (usually at either the start or end of a    |
   |                          | selection).                                 |
   |--------------------------+---------------------------------------------|
   |                          | An integer indicating the time in           |
   |                          | milliseconds to wait before blinking the    |
   |                          | cursor. A positive value will cause the     |
   |                          | cursor to always blink. Setting             |
   |                          | blinkInterval to zero will cause the cursor |
   |                          | to never blink which may be useful on some  |
   |                          | display servers connected to very slow      |
   | blinkInterval            | networks. The disadvantage of setting it to |
   |                          | zero is that it is sometimes hard to tell   |
   |                          | where the cursor is when situated at the    |
   |                          | boundary of a highlighted region. A         |
   |                          | negative value (which is the default) will  |
   |                          | cause the cursor to blink only when         |
   |                          | situated in a highlighted region such as a  |
   |                          | selection. This will make the cursor        |
   |                          | visible no matter where it is.              |
   |--------------------------+---------------------------------------------|
   |                          | When doing text attribution with the        |
   |                          | "attribute-cntl_a-sequences-til" command    |
   |                          | (bound to ^A-A), the attribute may be of    |
   |                          | the form "Cn", where 'n' is a hexadecimal   |
   |                          | digit. This digit picks one of the 16       |
   |                          | fcolor/bcolor pairs set up in the color     |
   |                          | subresource. For example, if the buffer     |
   |                          | contained the text: ^A6C3:foobar then after |
   |                          | the ^A-A command was applied, the leading   |
   | color.fcolor0,           | "^A3C3:" would be gone, and the word        |
   | color.bcolor0, ...,      | "foobar" would appear in the foreground and |
   | color.fcolor15,          | background colors specified by              |
   | color.bcolor15           | color.fcolor3 and color.bcolor3. The        |
   |                          | fcolorN resources have default values       |
   |                          | corresponding to the ANSI convention, while |
   |                          | bcolorN default to the window background.   |
   |                          | If you wish to set bcolorN for special      |
   |                          | effect, you should add this to your .vilerc |
   |                          | file set bcolor=fcolor to tell xvile to use |
   |                          | the bcolorN resources when displaying       |
   |                          | attributed text. Otherwise, setting bcolor  |
   |                          | will change the window background, as in    |
   |                          | the termcap and similar versions of vile.   |
   |--------------------------+---------------------------------------------|
   | menuHeader               | The names given to the menu header and      |
   | menuEntry                | entries, respectively.                      |
   |--------------------------+---------------------------------------------|
   | menuHeight               | resource controlling the Athena menu-height |
   |--------------------------+---------------------------------------------|
   | openIm                   | true if input method should be opened       |
   |                          | (default: true)                             |
   |--------------------------+---------------------------------------------|
   | inputMethod              | input method to use (default: "")           |
   |--------------------------+---------------------------------------------|
   | preeditType              | pre-edit type (default: "OverTheSpot,Root") |
   |--------------------------+---------------------------------------------|
   | wheelScrollAmount        | Amount to scroll for a wheel mouse, per     |
   |                          | button-press.                               |
   +------------------------------------------------------------------------+

  Sample .Xdefault entries

   You may or may not want to use the following as a starting point for the
   "XVile" section of your .Xdefaults or .Xresources file. If you have a
   monochrome display server, you will probably not want to use any of the
   color specifications. You may, however, wish to set up a blinking cursor,
   using "blinkInterval" (see above).

     XVile*font: -*-courier-medium-r-normal-*-*-*-75-75-m-70-iso8859-*
     XVile*geometry: 80x54
     XVile.background: darkslategrey
     XVile.foreground: honeydew
     XVile.scrollbar.foreground: firebrick2
     XVile.scrollbar.sliderIsSolid: true
     XVile.selection.background: aquamarine4
     XVile.selection.foreground: honeydew
     XVile.cursor.background: yellow
     XVile.cursor.foreground: darkslategrey
     XVile.modeline.Background: steelblue
     XVile.modeline.foreground: darkslategrey
     XVile.modeline.focusForeground: yellow

  Fonts

   To change the font on the fly, use the ':setv' command to set the $font
   variable, with ":setv $font <fontname>".

   At present, only xvile is capable of displaying bold and italic (or
   underline) text associated with attributes. It is anticipated that other
   versions of vile will catch up to the best of their ability. Users of
   xvile will find that the italic font in particular is not always available
   with the font that they've chosen (or have had chosen for them). If an
   italic font is unavailable, xvile will underline text which is meant to be
   italic. The program xfontsel is quite useful for determining which fonts
   are available on your display server and whether there are corresponding
   bold and/or italic fonts available.

   Here are some tips on using xfontsel to find an appropriate font.

    1. Set rgstry (registry) to iso8859
    2. Set spc (spacing) to either "c" (cell font) or "m" (monospaced font).
       You will be more likely to find a font which will work as italic if
       you choose a monospaced font, however. You definitely do not want a
       proportional font.
    3. Now pull down the slant menu. Select either "i" (italic) or "o"
       (oblique). If neither of these are available, go back to step 2 and
       choose a different spacing.
    4. Set avgWdth (average width) next. If you divide the value you've
       chosen by ten, this will be width of a glyph in the font in pixels.
    5. Set wght (weight) to medium. If you have a hard time seeing the
       characters, you might want to choose bold, but xvile will not be able
       to use the bold font for displaying bold text. It will be forced to
       overwrite text that it wants to be bold with the text shifted by one
       pixel. This works fairly well for larger fonts.
    6. Set fmly (family) to a value according to personal taste. By this
       step, you might not have any choice on the matter anyway.
    7. If only one font is available at this point, the other fields don't
       matter that much. Otherwise set these according to taste.
    8. Go back to the slant menu and change either the "i" or "o" to "r".

   This will be the font to use. xvile will be attempt to get the italic font
   when needed by substituting either "o" or "i" for the "r".

   If the above seems too tedious, you can just try the following font which
   (on many display servers) is pretty close to the size of the default font
   that xvile will start up with.

     -*-courier-medium-r-*-*-*-*-*-*-*-70-*-*

   You can try it out by issuing the appropriate "set font" command from
   xvile. For longer term use, you will probably want to put it in your
   .Xdefaults file. It will look something like this:

     XVile*font: -*-courier-medium-r-*-*-*-*-*-*-*-70-*-*

   You may also set the font from your .vilerc file. This is not recommended,
   however, as you lose the ability to choose a different font from the
   command line or resource file. It may also cause the xvile window to be
   unnecessarily resized during initialization.


DOS specifics
-------------
   The .vilerc file is called vile.rc under DOS.

   vile is perfectly happy (and even tries very hard) to use the UNIX-style
   "forward-slash" ('/') as a path delimiter. Entering the "backslash" ('\')
   will work, but you should be aware that vile uses this character as an
   escape mechanism for entering special characters (e.g. "\t" for TAB) in
   strings. As an example setting "tags" to "tags ..\tags" will not have the
   intended result. Instead, use "tags ..\\tags" or better, "tags ../tags".

   vile should leave your screen in the mode you're in when you enter it,
   unless you explicitly change it to a different mode with a "set sres="
   line in your vile.rc, or if you use a command line option to change it.
   Command line options consist of a dash followed by one of the following
   selectors (these are the same values that can be assigned to "sres").
   These values are supported by the DOS (borland.c) terminal driver: "2",
   "25", "4", "43", "5", "50", "6", "60"

   If you shell out in 50 line mode, make sure you are in 50 line mode before
   you exit the dos shell, otherwise you end up with a 50 line edit window
   with only the top 25 displayed.

   The vile.rc file can be located in the same directory as your binary
   executable, since vile searches the $PATH for this file.

   All file globbing, including from the command line, is done using UNIX
   shell-style wild-carding conventions.

   The expansion of the ':' character in user input, which normally expands
   to the "word under the cursor", is suppressed for DOS, due to the conflict
   with the drive-specifier syntax (e.g. "c:\foo"). The character '&' may be
   used for this instead.

   In any version of vile there is a command, "set-dos-mode", which will a)
   strip all carriage-return ('^M') characters from the ends of lines in the
   buffer and b) set the "dos" mode so that carriage returns are appended
   when the file is written. There is also a corresponding "set-unix-mode"
   command, which strips carriage returns, and forces "nodos" mode, so that
   they don't come back when you write the file. In both cases, "dos" mode
   becomes a so-called "local" mode, so that the rest of your buffers will be
   unaffected. See also the discussion of "recordseparator" mode.


VMS specifics
-------------
   The .vilerc file is called vile.rc under VMS

   Reading from a pipe works; writing to a pipe is not implemented.

   As is true for DOS, the expansion of the ':' character in user input is
   not supported due to conflicts with filename syntax delimiters. Use '&'
   instead.

  Paths

   vile recognizes either VMS- or UNIX-style pathnames and '~' is supported
   as a shortcut for SYS$LOGIN (e.g., :e ~/login.com). However, filename
   completion only works for UNIX-style pathnames, since those allow us to
   implement directory and filenames in the same syntax.

   CDPATH directory lists are delimited with a comma and only the following
   components may be included:

     * rooted logicals terminated with ':'
     * directories terminated with ']'

   Example:

         $ CDPATH :== dev$diska:[home],rooted$build_dir:

  Command-Line Switches

   vile accepts these command-line options in addition to the standard ones:

   +---------------------------------------------------------+
   | Option | Description                                    |
   |--------+------------------------------------------------|
   | -80    | force 80-column mode (N/A for VT52 terminals)  |
   |--------+------------------------------------------------|
   | -132   | force 132-column mode (N/A for VT52 terminals) |
   +---------------------------------------------------------+

  Modes

   +------------------------------------------------------------------------+
   | Name          | Description                                            |
   |---------------+--------------------------------------------------------|
   |               | Show all versions of files in response to filename     |
   | allversions   | completion or wildcards on the command line. Normally  |
   |               | this is off. (U)                                       |
   |---------------+--------------------------------------------------------|
   |               | This feature is implemented by setting the screen      |
   | flash         | video to reverse color and then normal. If this        |
   |               | sequence of changes is incompatible with your terminal |
   |               | preferences, avoid this mode and use vtflash instead.  |
   |---------------+--------------------------------------------------------|
   |               | Specify format of files that vile writes. If           |
   | record-format | undefined, vile will attempt to use the format of an   |
   |               | older version of the file, or "stmlf" if none exists.  |
   |               | (B)                                                    |
   |---------------+--------------------------------------------------------|
   |               | Specify record attributes of files that vile writes.   |
   | record-attrs  | If undefined, vile will attempt to use the format of   |
   |               | an older version of the file, or "cr" if none exists.  |
   |               | (B)                                                    |
   |---------------+--------------------------------------------------------|
   | record-length | Maximum record size, used if record-format is "fixed"  |
   |               | or "vfc". (B)                                          |
   +------------------------------------------------------------------------+

  Variables

   +------------------------------------------------------------------------+
   | Name  | Description                                                    |
   |-------+----------------------------------------------------------------|
   |       | Switch between 80- and 132-column screen resolutions by        |
   | $sres | setting this variable to either NORMAL or WIDE (e.g., :setv    |
   |       | $sres=wide).                                                   |
   +------------------------------------------------------------------------+

  Default key maps

   With respect to VT100 and later terminal types, the editor assumes a vt220
   keyboard and maps special keys to their closest vile counterpart (e.g.,
   "Remove" mapped to vile's "Delete"). Some vt220 keyboard special keys have
   no obvious counterpart, in which case, these mappings apply:

         PF1-PF4  =>  F1-F4,
         Help     =>  F15,
         DO       =>  F16.


Win32 specifics
---------------
   The editor may be invoked/built as a console or GUI application. The
   former is known as vile.exe and the latter as winvile.exe . For the
   remainder of this section of the help file, a generic reference to "vile"
   refers to both the console and GUI editor, unless otherwise stated.

  Heritage

   The Win32 version of vile supports almost all of the features and changes
   listed directly above in the section entitled "DOS specifics", with the
   exception that the editor's screen resolution cannot be changed using
   explicit -43, -50, etc. command-line switches or via the sres command.

  GUI Command-Line Switches

   Winvile accepts these command-line options in addition to the standard
   ones:

   +------------------------------------------------------------------------+
   | Name              | Description                                        |
   |-------------------+----------------------------------------------------|
   | -fn <fontspec>    | Initial font (or -font). The "Winvile Font"        |
   |                   | section below describes <fontspec> syntax.         |
   |-------------------+----------------------------------------------------|
   |                   | Initial window dimensions in Columns and Rows (for |
   |                   | example "-geometry 80x30"). Be aware that the      |
   | -geometry <C>x<R> | specified geometry may not exceed the bounds of    |
   |                   | the current desktop screen. Note also that         |
   |                   | $pagelen and $pagewid may be used to change        |
   |                   | winvile's dimensions.                              |
   |-------------------+----------------------------------------------------|
   |                   | Check if the remainder of the command-line (after  |
   |                   | this option) is a readable filename which may      |
   | -i                | contain embedded blanks. If so, change current     |
   |                   | directory to match this filename. This is used to  |
   |                   | make shortcuts such as "Send To" work nicely.      |
   +------------------------------------------------------------------------+

  Console Command-Line Switches

   Vile accepts these additional command-line options:

   +------------------------------------------------------------------------+
   | Name     | Description                                                 |
   |----------+-------------------------------------------------------------|
   |          | Start editor in a new console environment if stdin is       |
   |          | redirected (i.e., input is taken from a redirected file or  |
   | -console | from a pipe). If this option is not set when stdin is       |
   |          | redirected, console mouse features are unavailable (this    |
   |          | problem is most often encountered on a Windows NT host).    |
   +------------------------------------------------------------------------+

  Pipes

   Internally, vile uses two radically different mechanisms for piping data
   to and from the shell. One mechanism uses temporary files and the other
   simply calls native Win32 services. This dichotomy exists because the NT
   shell (cmd.exe) handles native pipes cleanly, but command.com, Microsoft's
   16-bit Win9X/WinME shell, does not. The mode variable w32pipes determines
   which mechanism is used.

   On WinNT/Win2K hosts, w32pipes is set by default and vile's pipe
   operations are implemented via Win32 services. On Win9X/WinME hosts, this
   mode is disabled by default and the editor falls back to temp files. Take
   note that 32-bit shells (e.g., Cygwin's bash, MKS's shell) properly handle
   native pipe operations on Win9X/WinME hosts. In that context, it's
   appropriate and highly desirable to manually enable "w32pipes" (e.g., "se
   w32pipes").

   +------------------------------------------------------------------------+
   | ******** Warning *********                                             |
   |------------------------------------------------------------------------|
   | If w32pipes is enabled and command.com initiates a pipe I/O            |
   | transaction on behalf of the editor, vile will almost certainly hang.  |
   | See the "Shell" topic below to learn how to specify the editor's       |
   | default shell.                                                         |
   +------------------------------------------------------------------------+

  Paths

   vile recognizes either DOS- or UNIX-style pathnames and '~' is supported
   as a shortcut for $HOME (e.g., :e ~/vile.rc).

   CDPATH directory lists are delimited with a semicolon.

  Shell

   When a filter, pipe, or explicit shell command requires execution of an
   external process, vile invokes an instance of the shell specified in the
   $COMSPEC environment variable. This default may be overridden by setting
   $shell from within vile.rc . Example:

     set-variable $shell 'c:\usr\binw\sh.exe'

   As is true on other hosts, external processes are normally started under
   the control of a shell. To forego the shell entirely, prefix the command
   string with "start ". Example:

     :!start calc           # start the windows calculator

   Finally, it may be necessary to pass one or more flags to the shell
   invoked via the :sh command (e.g., force execution of a special login
   script). Passing such flag(s) via $shell is not a workable solution.
   Instead, use a macro similar to the following that supercedes the builtin
   :sh command:

     store-procedure sh
             ; pass -L (login) flag to MKS shell, assumes sh is
             ; reachable from $PATH
             ~local %sh
             setv %sh="sh -L"
             ~if &seq $progname "winvile"
                     1 shell-command &cat "start " %sh
             ~else
                     1 shell-command %sh
             ~endif
     ~endm

   In the example, the "1" preceding "shell-command" tells winvile to
   suppress the

     press any key to continue

   prompt which it would normally use when the command completes. Without the
   prompt, the console window which winvile opens to run a shell command will
   close by itself.

  Cygwin's Bash Versus Console vile

   Using Cygwin's bash as vile's shell works well, with one exception. When
   console vile is invoked from a bash command line, typing ^C or
   Control+Break within the editor causes an immediate exit (no data saved).
   As it turns out, bash's signal handling is crafted to work best with other
   Cygwin programs (ls, wc, etc.) and not with native Win32 apps. A simple
   workaround is as follows:

    1. obtain and install the ash shell, which is included with the Cygwin
       distribution. Note that ash is installed as sh.exe .
    2. edit .bashrc (or equivalent config file) and add this function:

          function vile
          {
                   sh <<- ENDIT-
                   vile $@
          ENDIT
          }

       When console vile is subsequently invoked from a bash command line,
       the editor will be started by sh, which does not suffer from the
       problem described above. The only drawback with this solution is that
       $@ splits filenames containing embedded spaces.

  Mouse (GUI and Console)

   Selecting and dragging with the left mouse button yanks text to the
   unnamed register. Press a control key during the selection to sweep out a
   rectangular region. Paste the selected text using the second (middle)
   mouse button. Clear a selection by clicking on a modeline.

   Resize a window by dragging its modeline up/down.

   Change vile's window focus via left mouse button clicks (when multiple
   windows are displayed).

   Select individual words or lines with a double or triple click.

   Note that console vile has zero mouse functionality if the parent command
   prompt window (aka DOS box) is configured with QuickEdit Mode enabled.
   QuickEdit is accessed like so:

         system menu->Properties->Options Tab

  Winvile Mouse

   Pressing the right mouse button pops up a menu of editor commands. These
   are predefined:

   +------------------------------------------------------------------------+
   | Menu entry | Description                                               |
   |------------+-----------------------------------------------------------|
   | Open       | executes the "winopen" command (described below).         |
   |------------+-----------------------------------------------------------|
   | Save As    | executes the "winsave" command (described below).         |
   |------------+-----------------------------------------------------------|
   | CD         | executes the "wincd" command (described below).           |
   |------------+-----------------------------------------------------------|
   |            | executes "winopen $favorites", which starts a common open |
   |            | dialog box that browses the Windows Favorites folder.     |
   |            | This feature is especially useful when folder shortcuts   |
   | Favorites  | are added to the Favorites folder via the Windows         |
   |            | Explorer's "Add To Favorites" feature. Once folder        |
   |            | shortcut(s) have been created in this manner, winvile's   |
   |            | "Favorites" menu provides two-click access to the         |
   |            | contents of any local or network-based folder.            |
   |------------+-----------------------------------------------------------|
   | Font       | described below.                                          |
   |------------+-----------------------------------------------------------|
   |            | disables the popup menu and instead transforms the right  |
   |            | mouse button into a hot key that copies the contents of   |
   | Menu       | the unnamed register to the clipboard. When the popup     |
   |            | menu is disabled, selection with the left mouse, followed |
   |            | by a right mouse click, provides a quick means of copying |
   |            | highlighted blocks of text to the clipboard.              |
   |------------+-----------------------------------------------------------|
   | Undo       | Bound to undo-changes-backward.                           |
   |------------+-----------------------------------------------------------|
   | Redo       | Bound to redo-changes-forward.                            |
   |------------+-----------------------------------------------------------|
   | Cut        | deletes current text selection into unnamed register and  |
   |            | copies same to clipboard.                                 |
   |------------+-----------------------------------------------------------|
   | Copy       | copies the current text selection to both the unnamed     |
   |            | register and the clipboard.                               |
   |------------+-----------------------------------------------------------|
   | Paste      | pastes clipboard contents (if text) into current buffer.  |
   |------------+-----------------------------------------------------------|
   | Delete     | deletes current text selection into unnamed register.     |
   |------------+-----------------------------------------------------------|
   | Select All | selects all text in the current buffer.                   |
   +------------------------------------------------------------------------+

   The first six popup menu entries are added to the system menu (in the
   upper left corner of the window). The system menu also includes:

     * two selections that support the traditional Windows printing
       interface.
     * a "Recent Files" menu that lists the last N files opened/created by
       the editor. Any file selected from this list is immediately opened for
       editing. This feature is disabled by default, but can be configured
       via the "recent-files" mode.
     * a "Recent Folders" menu that lists the last N folders visited via an
       explicit or implicit cd. Selecting a folder from this list is
       equivalent to executing ":cd <foldername>". This feature is disabled
       by default, but can be configured via the "recent-folders" mode.
     * a "Menu" command that disables/re-enables the aforementioned popup
       menu.

  Clipboard

   There are several ways to copy to/from the clipboard:

     * Copy data from the unnamed register to the windows clipboard via the
       copy-unnamed-reg-to-clipboard command (bound to Alt+Insert).
     * Copy data from a named register or region to the clipboard (a la
       vile's ^W operator) via the copy-to-clipboard-til command (bound to
       Ctrl+Insert).
     * The paste-from-clipboard command copies data from the clipboard to the
       current buffer (bound to Shift+Insert).
     * Finally, the cut-to-clipboard command deletes the current text
       selection and copies same to both the clipboard and the unnamed
       register (bound to Shift+Delete).

   Some examples, assuming <CI> => Ctrl+Insert and <AI> => Alt+Insert:

         4yy<AI>  ;copy 4 lines from unnamed reg to clipboard
         "a<CI>   ;copy register 'a' to clipboard
         "b<CI>   ;copy register 'b' to clipboard
         <CI>3w   ;copy 3 words to clipboard

   The swap-clipboard-keys command swaps the commands bound to Ctrl+Insert
   and Alt+Insert.

  OLE Automation

   Winvile may be invoked as an OLE automation server and thereafter
   controlled by an OLE client. Refer to the file doc/oleauto.doc for further
   details. Additionally, the OLE client "visvile.dll" provides a mechanism
   for substituting winvile as the default Developer Studio editor. Refer to
   the file doc/visvile.doc for detailed information.

  Winvile Font

   Winvile's font may be set via a command-line switch or from within the
   editor by modifying the built-in $font state variable. In either case, a
   <fontspec> string describes the desired font, where:

         <fontspec>  :== [<face>,]<size>[,<style>]
         <face>      :== font-name
         <size>      :== point size (as an integer)
         <style>     :== { bold | italic | bold-italic }

   Note 1: if <style> is unspecified, "normal" is assumed.

   Note 2: if <face> contains a comma, escape it with '\'.

   Note 3: if <face> is omitted, the current font is modified.

   Note 4: if <face> contains spaces and the font is set from the
   command-line, delimit <fontspec> as appropriate for the current
   shell/desktop environment.

   Note 5: <face> must be fixed pitch. To obtain a list of all fixed pitch
   fonts on the current win32 host, invoke winvile and browse the "Font"
   dialog box accessible from the system menu (accelerator key is ALT+<space
   bar>+f).

         Cmdline Examples                Internal Examples
         ****************                *****************
         -fn 'Letter Gothic,8'           :setv $font r_ansi,7
         -font r_ansi,8,bold             :setv $font 8

         Vile.rc Example
         ***************

     ~if &sequal $progname "winvile"
             set-variable $font "courier new,8"
     ~endif

  Perl with Winvile

   At the user's discretion, vile may be built with an embedded perl
   interpreter. To date, only the perl distribution at the following URL is
   supported:

         http://www.perl.com/CPAN-local/ports/win32/Standard/x86/

   If you acquire (i.e., do not personally build) a copy of "perl-embedded"
   vile, these external configuration steps are necessary:

    1. Obtain a complete perl distribution[*] from the aforementioned URL and
       install it. Included in this distribution, among many other items, is
       a required DLL and the usual perl packages.
    2. [Optional] To invoke vile-based perl scripts distributed with the
       editor, create an exported environment variable called
       VILE_LIBDIR_PATH that specifies a directory of your choice. Then
       create a subdirectory called %VILE_LIBDIR_PATH%\perl and copy the
       scripts to same. The list of scripts known to work in a Win32
       environment includes:

         hgrep.pm Glob2re.pm Visit.pm search.pm

   [*] Choose either a precompiled version of perl or build it yourself from
   source. In this context, a "complete" distribution includes the perl
   interpreter and all "standard" modules and libraries.

  Winvile Commands

   delete-text-selection
           Delete the current text selection to the unnamed register. Bound
           to Alt+Delete.

   purge-recent-files
           Clear the list of files that appear in winvile's "Recent Files"
           menu.

   purge-recent-folders
           Clear the list of folders that appear in winvile's "Recent
           Folders" menu.

   reset-rgb-palette
           Set red/green/blue values to their initial state. If you give a
           parameter, this is used to specify a single color number.

   set-rgb-palette
           Set red/green/blue values for the specified color. Values range
           from 0-255. Example:

         set-rgb-palette red 200 0 0

   swap-clipboard-keys
           See discussion of clipboard above.

   wincd [dir]
           Launches a standard Windows "Browse Folder" control for the
           purpose of graphically specifying a new working directory. The
           optional "dir" argument specifies the initial browse directory
           (default is current working directory).

   winopen [dir]
           Launches the Windows common open dialog box to open one or more
           files within the editor. The optional "dir" argument specifies the
           initial browse directory (default is current working directory).
           Note that if this dialog box opens files outside the editor's cwd,
           then Windows (and vile) implicitly change the cwd to match that of
           the opened files. This command _is_ available from console vile.

   winopen-nocd [dir]
           Same as "winopen", except the editor's cwd remains unchanged.

   winpage-setup
           launch Windows common page setup dialog (winvile only). Use this
           command to set page attributes before invoking winprint.

   winprint
           print current buffer or text selection (winvile only). Note that
           neither color nor display attributes are rendered at this time.

   winsave [dir]
           Launches the Windows common save dialog box to save the current
           buffer in a file of the user's choice. The optional "dir" argument
           specifies the initial browse directory (default is cwd). Note that
           if this dialog box saves a file outside the editor's cwd, then
           Windows (and vile) implicitly change the cwd to match that of the
           saved file. This command _is_ available from console vile.

   winsave-nocd [dir]
           Same as "winsave", except the editor's cwd remains unchanged.

  Modes

   echo-to-clipboard
           all text selected with the mouse is automatically copied to the
           Windows clipboard. (U)

   icursor
           denotes a string that configures the characteristics of an
           insertion cursor.

           With respect to console vile, this string either specifies a
           fixed, block cursor height or else sets the block cursor heights
           in the editor's insertion and command modes. Argument syntax:

           "<fixed_block_height>" or "<insmode_height>,<cmdmode_height>"

           The valid range of <fixed_block_cursor_height> is 0-100 (%).
           Specifying 0 reverts to the cursor height in effect at editor
           invocation. The valid range of <insmode_height> and
           <cmdmode_height> is 1-100.

           With respect to winvile, this string specifies an integer in the
           range 0-2, which selects one of the following styles:

         0 -> fixed block cursor
         1 -> cmd mode = block cursor
             ins mode = vertical bar
         2 -> cmd mode = vertical bar
             ins mode = block cursor (U)

   popup-menu
           Enables/disables the winvile popup menu. (U)

   recent-files
           Specify maximum number of files that may appear in winvile's
           "Recent Files" menu. Range is 0-20; a value of 0 disables this
           menu. (U)

   recent-folders
           Specify maximum number of folders that may appear in winvile's
           "Recent Folders" menu. Range is 0-20; a value of 0 disables this
           menu. (U)

   scroll-pause
           An integer indicating the time in milliseconds to wait after
           scrolling the display. A value of zero, the default, disables this
           mode. This mode is necessary when rapid scrolling operations cause
           improper screen refresh by the console editor (should only be a
           problem with inexpensive video HW). Typical values, if required,
           are 20-80 (msec). (U)

   w32pipes
           See discussion of pipes above. (U)

  Configuring both editors

   Some vile commands and modes apply only to winvile and some only to
   console vile. If you plan to run both winvile and console vile in the
   context of a single startup file, you'll need to include code similar to
   this in vile.rc:

       ~if &sequal $progname "winvile"
               set-variable $font "r_ansi,8"
               setv $pagelen=39
               set icursor="1"
               ; etc
       ~else
               set icursor="35,100"
               ; etc
       ~endif


Differences from vi
-------------------
   Of course, this really isn't vi. Some of the following differences deserve
   changing, others do not.

   The parser for the ':' commands is not very vi-like. For instance, ":e"
   will prompt you for a file name. Most commands remember their last
   argument, and will present it as the default reply to their prompt.

   The backspace, line kill, word kill, job control, etc. characters are not
   rebindable. They are, however, read from the tty settings on startup.

   There is no expansion of ! in filenames. It is expanded in shell escapes,
   so the command ":!!" does rerun the previous shell command. Occurrences of
   '#' and '%' are recognized and expanded to the previous or current
   filename.

   Paragraph and section boundaries, for the {, }, [, and ] commands are
   configurable, but may not exactly match those in vi. They are expressed
   via regular expressions. The default regular expressions are quite
   complex, to support the traditional nroff and troff boundaries. If you are
   just editing code, you may want to replace them:

       ; set paragraph and section r.e.s for speed on C/C++/perl code.
       set paragraphs=^$
       set sections=^[{^L]

   There is no special lisp support. But then, when was the last time you
   heard of a lisp programmer that used vi?

   Of course, ex and open mode aren't there. (Too bad. I'd love to have a
   companion editor called "exile".)

   Most, but not all, of the word-motion-with-operator and end-of-line
   anomalies have been recreated. One missing anomaly: In vile, "dw" on the
   last word of a line ending in whitespace deletes the trailing whitespace.
   vi does not delete the whitespace.

   In the real vi, the '_' command is a little-used motion command, which
   moves the cursor to the start of the Nth next line, where N is the
   argument given, less 1. So '2_' takes you to the start of the next line.
   Primarily intended for use in an operator context, as in "2d_", it is
   always exactly equivalent in those cases to "stuttering" the operator, as
   in "2dd". Most people know about and use the stuttered form, so in vile,
   the '_' command is used by default for buffer history. If the regular vi
   behavior is desired, put the following in the .vilerc file:

       bind-key whole-lines _


Sample .vilerc
--------------
   Here's a sample .vilerc, to help get you started with the syntax and style
   of vile macros:

       source vileinit.rc
       set autoindent
       set fillcol 75

       ; sitting on a brace, run the C code block through indent
       1 store-macro
               write-file
               filter-til goto-matching-fence "indent -st"
       ~endm

       ; format the current paragraph
       2 store-macro
               previous-paragraph
               filter-til next-paragraph "/usr/ucb/fmt"
       ~endm

       ; put 'fprintf(stderr,"\n");' into the file, and
       ; position the cursor to add to the string
       3 store-macro
               ~force next-line
               beginning-of-line
               insert-string "fprintf(stderr, \"\\n\");\n"
               ; six back, because it counts the newline
               6 backward-character
               insert-chars
       ~endm

       ; insert '> ' in front of every line from here til the end
       ; (this works because without argument, the default action
       ; for "goto-line" is to go to the end of file.
       4 store-macro
               substitute-til goto-line "^" "> "
       ~endm

       ; spelling keystroke: write the buffer, invoke ispell, and force
       ;       it to be read back in.
       2 store-macro
               ~local $warn-reread
               write-file
               ; suppress "press return" with "1" argument to shell-command
               1 shell-command &cat "ispell " $cfilname
               ; suppress reread warning
               set nowarn-reread
               replace-with-file $cfilname
       ~endm
       bind-key execute-macro-2 #I

       ; the next three give more mnemonic window commands
       bind-key next-window ^N
       bind-key previous-window ^P
       bind-key split-current-window ^T

       bind-key execute-macro-1 ^A-C
       bind-key execute-macro-2 ^A-F
       bind-key execute-macro-3 ^A-K
       bind-key execute-macro-4 ^A-M


Notes on TERM types and Scrolling
---------------------------------
   vile will determine the window size in one of three ways: first it will
   ask the tty driver (using a TIOCGWINSZ ioctl call under UNIX). Failing
   that, it will use the LINES and COLUMNS environment variables. As a last
   resort it will use the size specified in the TERMCAP entry corresponding
   to the TERM variable. In addition, vile will attempt to support the
   SIGWINCH signal, which allows it to track changes to the size of the
   window in which it is running.

   If scrolling is really slow, or really ugly (the status line hops around a
   lot), and you're using a vt102 or compatible terminal that you think
   should be able to scroll okay, then the problem is almost certainly your
   termcap entry, which probably doesn't describe scrolling regions
   adequately. Most standard termcap entries are insufficient. The standard
   "xterm" entry on many systems falls into this category, and vile contains
   code that, as a special case, will augment an "xterm" entry with the codes
   needed for scrolling regions.

   In any case, here's a termcap entry that should work:

     dy|vt102|vt-102|dec vt102:\
             :do=^J:co#80:li#24:cl=50\E[;H\E[2J:\
             :le=^H:bs:cm=5\E[%i%d;%dH:nd=2\E[C:up=2\E[A:\
             :ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\
             :md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;24r\E[24;1H:\
             :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
             :ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\
             :ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=5\EM:vt#3:\
             :sc=\E7:rc=\E8:cs=\E[%i%d;%dr:vs=\E[?7l:ve=\E[?7h:

   The crucial entries are cs and sr - without both of them, vile will
   attempt to use dl and al, and will scroll by deleting and inserting a
   block of lines, giving the ugly behavior you're probably seeing. If you
   define PRETTIER_SCROLL when building vile, it will alternately delete and
   insert lines, instead of deleting them all and then inserting them all.
   This makes it look a _little_ better, but it's slower.

   Here is the terminfo entry equivalent to the above termcap entry:

     vt102|vt-102|dec vt102,
             xon,
             cols#80, lines#24, vt#3,
             bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
             clear=\E[;H\E[2J$<50>, cnorm=\E[?7h, cr=\r,
             csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\n,
             cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
             cuu1=\E[A$<2>, cvvis=\E[?7l, ed=\E[J$<50>,
             el=\E[K$<3>, home=\E[H, ht=\t, ind=\n,
             is2=\E[1;24r\E[24;1H, kbs=\b, kcub1=\EOD, kcud1=\EOB,
             kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
             kf4=\EOS, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
             rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
             rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
             sgr0=\E[m$<2>, smkx=\E[?1h\E=, smso=\E[7m$<2>,
             smul=\E[4m$<2>,


Credits
-------
   (last updated Jan, 2000)

   Since version 6.1, Tom Dickey has been maintaining the "official" source
   tree, and release responsibilities. Paul Fox maintains the mailing lists.

   This code has been written by a _lot_ of people, with help from a lot more
   sending in bug reports, fixes, and suggestions. The authors of vile are
   Tom Dickey (dickey@invisible-island.net) and Kevin Buettner
   (kevin@buettner.to) and Paul Fox (pgf@foxharp.boston.ma.us).

   Names appearing within comments in the micro-Emacs source code are: Dave
   Conroy, Daniel Lawrence, John Gamble, Roger Ove, Dana Hoggatt, Jon Reid,
   Steve Wilhite, George Jones, Adam Fritz, D.R.Banks, Bob McNamara, and
   Brian Straight. Dan Lawrence, in particular, did a huge amount of work on
   the code on which vile is based. vile re-implements and extends many
   features inspired by his work.

   Throughout the years, Tom Dickey has contributed many code improvements
   and features, and has stabilized vile on both VMS and DOS. After taking
   over official maintenance duties, Tom coded winvile, added majormodes,
   added 16-color support, and implemented the majority of the current syntax
   coloring infrastructure. On an ongoing basis, Tom continues to fix bugs
   and provide the drive and energy that pushes out one release of the editor
   after another-no small feat for a product that's supported on multiple
   hosts.

   Kevin Buettner has contributed lots of changes for X11 Toolkit support, as
   well as the bulk of the selection and video attribute mechanisms, and the
   bulk of the :map command. Kevin also added autocoloring and a Perl
   interface to the editor. Rick Sladkey has done great stuff making vile
   work correctly in Win32 environments, something I might not have done for
   a long time. Some of the "ex" code is by Steve Kirkendall, author of the
   vi work-alike "elvis". The regular expression code and documentation is by
   Henry Spencer. Dave Lemke contributed code for new features, including the
   original native X11 support. Eric Krohn has done some excellent testing
   and enhancement. The implementation of rectangles and their operations was
   inspired by code from the 'notgnu' editor, by Julie Melbin. Patches to
   support OS/2 came from Charles Moschel and for Windows/NT from Joe Greer
   and Clark Morgan. Ed Henderson gave us wvwrap, as well as several other
   useful patches. Chris Coppick created Vileserv. Alex Wetmore contributed
   stored procedures and vile's initial btree interface (the latter later
   rewritten by Tom). Brendan O'Dea closely monitors the Perl API, as well as
   contributing Perl updates. Brendan also added the machinery for binding
   vile commands to Perl subroutines. Better still, he also found a way to
   bind operators and motions to same. Kuntal Daftary added several Perl
   modules. Clark Morgan and Greg McFarlane seem to run full regression tests
   on each new release, and always seem to find something to report. In
   addition, Clark regularly updates and corrects the documention left as an
   afterthought by the rest of us. Sean Ahern is also always dependable for
   finding a bug or two per release. The reference.doc file supplied with
   Bram Moolenaar's excellent Vim editor was useful in unraveling some of the
   less obvious parts of :map functionality. In addition, his implementation
   of digraph insertion was used directly in the creation of digraphs.rc.
   Thanks to Jukka Keto for contributing the c-filt.c code, which served as
   the precursor for vile's current syntax coloring implementation.

   The initial changes to create vile from micro-Emacs were all done by Paul
   Fox (pgf@foxharp.boston.ma.us). (By the way, he is not the Paul D. Fox
   that wrote the Crisp editor.)

   - Paul Fox


Where to Get It
---------------
   vile's homepage is
   http://invisible-island.net/vile/

   Up-to-date copies of vile, including executables for DOS, Win32 and OS/2
   are found at

     * ftp://invisible-island.net/vile/

   which is mirrored at

     * http://invisible-mirror.net/archives/vile/

   There are also links on vile's homepage, for both ftp and http connections
   for the most often used executables and sources.

   Development patches are found at

     * ftp://invisible-island.net/vile/patches/
     * http://invisible-mirror.net/archives/vile/patches/

   In addition, we have distributed copies at other sites, including
   metalabs.unc.edu (Linux), hobbes.nmsu.edu (OS/2) and the VMS Freeware
   CDROM's.


Problems
--------
   Submit bug reports via the project mailing list, or via the web-based bug
   reporting system. Both of these are available here:
   https://savannah.nongnu.org/projects/vile

   Subscribing to the mailing list is also the best way to keep informed of
   new releases.


Online resources
----------------
   This information is also available online:

     * http://invisible-island.net/vile/vile-toc.html (table of contents)
     * http://invisible-island.net/vile/vile-hlp.html (this file)


Copyright
---------
   Copyright (c) 1995-2014,2015 by Paul Fox, Thomas Dickey, and Kevin
   Buettner

-- (generated by make-hlp.pl from vile-hlp.html(1.95))
-- vile:txtmode fillcol=78
-- $Header: /usr/build/vile/vile/RCS/vile.hlp,v 1.738 2015/09/07 14:25:56 tom Exp $