/usr/share/tkgate/doc/systemTasks.html

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
   <TITLE>TKGate User Documentation (System Tasks)</TITLE>
    <META http-equiv="Content-Style-Type" content="text/css">
    <link rel="stylesheet" href="tkgate.css" type="text/css">
</HEAD>
<BODY>

<H2><![section=4]>B. List of System Tasks</H2>

<A NAME="tasks"></A>
<h3>B.1 Data Display Tasks</h3>

The system tasks described in this section generate output to the
console.  When simulating through the TkGate interface, the output
will go to the <a href="gateSiml.html#simOutputConsole">simulator
output console</a>.  When simulating in stand-alone mode with "Verga",
output will go to the standard output.

<h4>B.1.1 $display</h4>

<div class=display>
Usage: <tt>$display(</tt><i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt>
</div>
<p>
This tasks outputs a message to the standard output when running Verga
in standalone mode, and to the simulation console when running under
TkGate.  A newline is appended to the output.  It is similar to the
<tt>printf()</tt> function used in C.
<p>
Unlike the C <tt>printf</tt> function, the first argument is not
necessarily a control string.  The <tt>$display</tt> function can have
from zero up to an arbitrary number of control strings.  For example:
<pre>
     integer r1,r2;

     r1 = 7; r2 = 12;
     $display(r1,r2);
</pre>
will print:
<pre>
7 12
</pre>
The same output could have been produced with a control string using
the statement:
<pre>
    $display("%d %d",r1,r2);
</pre>
The general rule is that if an argument is a string, then it is
treated as a control string and consumes as many arguments after it as
there are conversions (e.g., "<tt>%d</tt>", etc.).  If an argument is
not a string, its value is printed.  The format in which it is printed
depends on the variable type.  Unsized values are printed in decimal,
sized values are printed using the Verilog hexadecimal notation.  For
example:
<pre>
     integer r1;
     reg [16:0] r2;

     r1 = 7; r2 = 12;
     $display(r1,r2);
</pre>
will print
<pre>
7 16'hc
</pre>
When printing constants and expressions, <tt>$display</tt> will use
the base specified in any constants.  For example
<tt>$display(1'o0+r2)</tt> would produce <tt>16'o14</tt>.
<p>
You can get greater control of the output using control strings with
conversions.  Strings are enclosed by the double quote character
(<tt>&quot;</tt>).  Use a backslash (<tt>\</tt>) before a double quote to
output the double quote itself and use <tt>\\</tt> to output a single
backslash character.  In addition, you can use "<tt>\n</tt>" to insert
extra newlines into the output.
<p>
The conversions supported in Verga are (case is ignored):
<br><br>
<table class=display>
<tr><th>Conversion</th><th align=left>Description</th></tr>
<tr><td colspan=2><hr></td></tr>
<tr><td><tt>%%</tt></td><td>Output a single percent character.</td>
<tr><td><tt>%m</tt></td><td>Output the name of the current module instance.</td>

<tr><td><tt>%t</tt></td><td>Output a simulation time value.  The raw
simulation time in epochs is converted to the units specified in any
<tt>`timescale</tt> declaration for the current module. If a precision
smaller than the units is specified, then the time value will be
output with a decimal point and the appropriate number of digits after
the decimal point.</td>

<tr><td><tt>%d</tt></td><td>Output a value in decimal format.</td>
<tr><td><tt>%b</tt></td><td>Output a value in binary format.</td>
<tr><td><tt>%h</tt></td><td>Output a value in hexadecimal format.</td>
<tr><td><tt>%o</tt></td><td>Output a value in octal format.</td>
<tr><td><tt>%c</tt></td><td>Output the character with the specified ASCII value.</td>
<tr><td><tt>%s</tt></td><td>Output the value as a string.</td>
<tr><td><tt>%f</tt></td><td>Output the value in floating point format.</td>
<tr><td><tt>%g</tt></td><td>Output the value in floating point format while minimizing the number of characters needed.</td>
</table>
<br>
The binary, hexadecimal and octal conversions output the raw number
without the leading radix and bit-size indication.  For example,
<pre>
   $display("%h",8'h1e);
</pre>
will output only "<tt>1e</tt>".
<p>
Like the C <tt>printf()</tt>, you can specify a number of spaces with
the conversion.  For example <tt>%4h</tt> will output a hexadecimal
value in a four character field, padding with spaces if necessary.  If
you use leading zero as in <tt>%04h</tt>, then Verga will pad the
output with zeros if necessary (e.g., "<tt>16'h2e</tt>" will be output
as "<tt>002e</tt>").
<p>
As a final example including multiple control strings, consider the
statement:
<pre>
   $display(9," a=%d b=%d ",42, 77, 12,13," c=%d d=%d ",5,9, 88);
</pre>
This will produce:
<pre>
9 a=42 b=77 12 13 c=6 d=9 88
</pre>

<h4>B.1.2 $monitor</h4>		

<div class=display>
Usage: <tt>$monitor(</tt><i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt>
</div>
<p>
The <tt>$monitor</tt> task formats the output from its arguments in
exactly the same way as the <tt>$display</tt> task.  The difference is
that instead of outputting the text immediately, it places a watch on
all variables referenced in the statement and outputs its message any
time a variable changes.  This can be used to generate a trace of any
variable changes.
<p>
As an example, consider this module:
<pre>
   module top;
   
     reg [15:0] a,b,c;
     
     initial
       $monitor("%t: a=16'h%04h  b=16'h%04h  c=16'h%04h",$time,a,b,c);
   
     initial
       begin
         #1 a = 'h4ef; b = 'h6def;
         #1 c = 'h84ff;
         #5 b = 42;
   
       end

   endmodule
</pre>
When simulated, it will produce the following output:
<pre>
1: a=16'h04ef  b=16'h6def  c=16'hxxxx
2: a=16'h04ef  b=16'h6def  c=16'h84ff
7: a=16'h04ef  b=16'h002a  c=16'h84ff
</pre>
Each time any of the variables <tt>a</tt>, <tt>b</tt> or <tt>c</tt>
change, the <tt>$monitor</tt> task will output the stored line.  In
this example, we set <tt>a</tt> and <tt>b</tt> after one time step.
The value of <tt>c</tt> was printed as <tt>16'hxxxx</tt> because it is
still uninitialized.  One time step later, we set <tt>c</tt>, then
five time steps later we set <tt>b</tt>.  This results in output from
<tt>$monitor</tt> at times steps 1, 2 and 7.
<p>
Only one <tt>$monitor</tt> may be active at a time.  If you call
<tt>$monitor</tt> more than once, only the last call will remain in
effect.

<h4>B.1.3 $monitoroff</h4>	

<div class=display>
Usage: <tt>$monitoroff;</tt>
</div>
<p>
This task temporarily disables a <tt>$monitor</tt> that has been
placed.  The monitor remains registered, but all output from it is
disabled.

<h4>B.1.4 $monitoron</h4>	

<div class=display>
Usage: <tt>$monitoron;</tt>
</div>
<p>
<p>
This task re-enables a <tt>$monitor</tt> that has been disabled by
<tt>$monitoroff</tt>.

<h4>B.1.5 $strobe</h4>		

<div class=display>
Usage: <tt>$strobe(</tt><i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt>
</div>
<p>
The <tt>$strobe</tt> task formats the output from its arguments in
exactly the same way as the <tt>$display</tt> task.  The primary
difference is that instead of outputting the message immediately, it
waits until the end of the time step and does the output with the
values at that time.  It can be used when you want to ensure that you
are outputting the final value of a variable for the time step.  As an
example, consider the module:
<pre>
 (1)    module top;
 (2)     reg [15:0] a, b, c;
 (3)
 (4)     initial
 (5)       begin
 (6)         a = 4; b = 7; c = a + b;
 (7)         $strobe("%t: strobe a=%d b=%d c=%d",$time,a,b,c);
 (8)         $display("%t: display a=%d b=%d c=%d",$time,a,b,c);
 (9)         a = c*b;
 (10)        c = a + 9;
 (11)        #1 b = a + 99;
 (12)      end
 (13)
 (14)  endmodule
</pre>
when this module is simulated, the following output is produced:
<pre>
0: display a=4 b=7 c=11
0: strobe a=77 b=7 c=86
</pre>
This <tt>$display</tt> tasks output the values as they are when
<tt>$display</tt> is called, but <tt>$strobe</tt> waits until the end
of the time step at Line 11 before it generates its output. 

<h4>B.1.6 $write</h4>		

<div class=display>
Usage: <tt>$write(</tt><i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt>
</div>
<p>
The <tt>$strobe</tt> task formats the output from its arguments in
exactly the same way as the <tt>$display</tt> task.  The only
difference is that it does not append a newline.  Use this task when
you want to use multiple <tt>$write</tt> statements to construct a
line of output.  You can use a <tt>\n</tt> in a string to generate a
newline.

<h3>B.2 File Tasks</h3>

The tasks described in this section allow Verilog descriptions to open
and write to files. 

<h4>B.2.1 $fopen</h4>		

<div class=display>
Usage: <i>descriptor</i><tt> = $fopen(</tt><i>file-name</i><tt>);</tt>
</div>
<p>
The <tt>$open</tt> task opens the specified file and returns a
descriptor.  The descriptor should be declared as an <tt>integer</tt>.
Files are always open for writing, so any file you specify will be
overwritten.  You may have at most 31 files open at once.  Below is an
example, of how to use <tt>$open</tt> to open a file.
<pre>
  integer d;

  initial
    begin
      d = $fopen("myfile.log");
      ... 
</pre>
You may use the bit-wise OR operator "<tt>|</tt>" to combine two or
more descriptors.  This will cause an write operations on that
descriptor to output to all of the files combined in this way.  You
may also OR in the value "1" to include output to the console.  For
example, given the statements:
<pre>
    d1 = $fopen("myfile1.log");
    d2 = $fopen("myfile2.log");
    d = d1 | d2 | 1;       
</pre>
writing to <tt>d</tt> will cause that output to be written to
<tt>myfile1.log</tt>, <tt>myfile2.log</tt> and the standard output.

<h4>B.2.2 $fclose</h4>		

<div class=display>
Usage: <tt>$fclose(</tt><i>descriptor</i><tt>);</tt>
</div>
<p>
Closes the file or files referenced by the descriptor.  If
<i>descriptor</i> has been formed by ORing together two or more
descriptors, all of the referenced files will be closed.

<h4>B.2.3 $fdisplay, $fmonitor, $fstrobe and $fwrite </h4>		

<div class=display>
Usage: <tt>$fdisplay(</tt><i>descriptor</i><tt>,</tt> <i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt><br>
Usage: <tt>$fmonitor(</tt><i>descriptor</i><tt>,</tt> <i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt><br>
Usage: <tt>$fstrobe(</tt><i>descriptor</i><tt>,</tt> <i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt><br>
Usage: <tt>$write(</tt><i>descriptor</i><tt>,</tt> <i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt>
</div>
<p>

These tasks operate in exactly the same way as their counter-parts
without the leading "<tt>f</tt>", except that they take a descriptor
as the first argument and write their output to the file (or files)
referenced by that descriptor.

<h3>B.3 Timing Check Tasks</h3>

The timing check tasks may only be used in the context of a
<tt>specify...endspecify</tt> block. They are described briefly here, but more
information on their use can be found in <a
href="gateHDL.html#constraintTasks">Section 4.10.3 Constraint
Tasks</a>.

<h4>B.3.1 $hold</h4>		

<div class=display>
Usage: <tt>$hold(</tt> <i>clock</i><tt>, </tt><i>data</i><tt>,</tt> <i>limit</i> <tt>);</tt>
</div>
<p>
The <tt>$hold</tt> task generates a warning message when a hold-time
constraint is not satisfied.  <i>clock</i> specifies a clock event
after which a data line must be held constant.  <i>data</i> specifies
the data signal that must not change for the hold period, and
<i>limit</i> specifies the time periods for which changes in
<i>data</i> are forbidden.  The <tt>$hold</tt> task may only be used
in a <tt>specify</tt> block.

 <h4>B.3.2 $setup</h4>

<div class=display>
Usage: <tt>$setup(</tt><i>data</i><tt>,</tt> <i>clock</i><tt>,</tt> <i>limit</i> <tt>);</tt>
</div>
<p>
The <tt>$setup</tt> task generates a warning message when a setup-time
constraint is not satisfied.  <i>data</i> specifies the data signal
that must not change for the setup period.  <i>clock</i> specifies a
clock event that ends the setup period, and <i>limit</i> specifies the
length of the setup period.  If the <i>clock</i> event occurs less
than <i>limit</i> time steps from the last change of <i>data</i>, a
warning message is generated.  The <tt>$setup</tt> task may only be used
in a <tt>specify</tt> block.

<h4>B.3.3 $width</h4>		

<div class=display>
Usage: <tt>$width(</tt> <i>event</i><tt>, </tt> <i>limit</i> <tt>);</tt>
</div>
<p>
The <tt>$width</tt> task generates a warning message when a pulse
width is shorter than a specified limit.  <i>event</i> specifies the
the leading edge of the pulse that is to be tested.  Use the
<tt>posedge</tt> or <tt>negedge</tt> keyword to indicate which edge is
to be tested.  <i>limit</i> is the minimum allowable pulse width.  If
the opposite transition is detected in fewer than <i>limit</i> time
steps, then warning message will be generated.  The <tt>$width</tt>
task may only be used in a <tt>specify</tt> block.

<h3>B.4 Simulation Information/Control and Miscellaneous Tasks</h3>

The tasks described in this section can be used to control the
simulation, get information about the simulation, and do other
miscellaneous tasks.

<h4>B.4.1 $finish</h4>		

<div class=display>
Usage: <tt>$finish;</tt>
</div>
<p>
This task terminates the simulation.  If called while running Verga in
stand-along mode, Verga will terminate immediately.  If called from a
description running under the TkGate, the simulator will terminate,
and TkGate will revert to edit mode.

<h4>B.4.2 $stop</h4>		

<div class=display>
Usage: <tt>$stop;</tt>
</div>
<p>
This task suspends the simulation and puts it into pause mode. If
called while running Verga in stand-along mode, it will have the same
effect as <tt>$finish</tt>, terminating the simulation immediately.
If called from a description running under the TkGate, the simulator
will enter paused mode allowing you to examine the values of variables
before unpausing the simulation.

<h4>B.4.3 $time</h4>		

<div class=display>
Usage: <i>variable</i><tt> = $time;</tt>
</div>
<p>

This task returns the current simulation time.  When assigning it to a
variable, that variable should be declared as a <tt>time</tt>
variable.  This is normally a 64-bit integer.  One of the most useful
places to use <tt>$time</tt> is in conjunction with a
<tt>$display</tt> or <tt>$monitor</tt> task to show the simulation
time at which the output is produced.  When using <tt>$time</tt> in
this way, you should use the <tt>%t</tt> conversion in the control
string.

<h4>B.4.4 $stime</h4>		

<div class=display>
Usage: <i>variable</i><tt> = $stime;</tt>
</div>
<p>
This task returns the low 32 bits of the current simulation time.  You
may assign it to an <tt>integer</tt> variable.


<h4>B.4.5 $random</h4>		

<div class=display>
Usage: <i>variable</i><tt> = $random;</tt><br>
Usage: <tt>$random(</tt><i>seed</i><tt>);</tt>
</div>
<p>
When called without an argument, this task returns a random number.
When called with an argument, that argument is used as the seed value
for the random number generator.

<h3>B.5 Memory Tasks</h3>

These tasks can be used to save and load the contents of a memory to or
from a file.

<h4>B.5.1 $readmemb and $readmemh</h4>		

<div class=display>
Usage: <tt>$readmemb(</tt><i>file</i><tt>);</tt><br>
Usage: <tt>$readmemb(</tt><i>file</i><tt>, </tt><i>memory</i><tt>);</tt><br>
Usage: <tt>$readmemb(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>);</tt><br>
Usage: <tt>$readmemb(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>, </tt><i>stop</i><tt>);</tt><br>
<br>
Usage: <tt>$readmemh(</tt><i>file</i><tt>);</tt><br>
Usage: <tt>$readmemh(</tt><i>file</i><tt>, </tt><i>memory</i><tt>);</tt><br>
Usage: <tt>$readmemh(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>);</tt><br>
Usage: <tt>$readmemh(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>, </tt><i>stop</i><tt>);</tt><br>
</div>
<p>

These tasks initialize one or more memories in a design from the
contents of a file.  The forms ending in "<tt>b</tt>" assume binary
formatted data, while the forms ending in "<tt>h</tt>" assume
hexadecimal formatted data.  If only a file name is specified, then
the name(s) of the memories to be initialized must be encoded in the
file.  If a memory is specified, than the file is loaded into that
memory.  You may also specify a start and stop address.
<p>
The file should contain a space separated list of values for the
memory.  The unknown (x) and floating (z) values may also be used in
one or more bits.  There are also several special control lines
beginning with "<tt>@</tt>" that can be used to specify the memory,
the address, or the radix of the file.  An example of a memory file is
shown below:
<pre>
@memory top.m
@0
3 4 9 16 25
36 49 64 81

@C
100 x x 99 z 12 x8 z12

@100
4 3 9x x x11

@1000000
12 13 14 z 19 20 x x x 30 31
</pre>
The <tt>@memory top.m</tt> specifies the name of the memory to be
loaded.  It should be a fully qualified path name.  The <tt>@0</tt>
line indicates that the following data is to be load beginning at
address 0, the <tt>@C</tt> line indicates data to be loaded beginning
at address hexadecimal <tt>C</tt>, and so forth.  You can also use a
line such as:
<pre>
@radix 8
</pre>
To change the radix for data in the file to binary (2), octal (8),
decimal (10) or hexadecimal (16).

<h4>B.5.2 $writememb and $writememh</h4>	

<div class=display>
Usage: <tt>$writememb(</tt><i>file</i><tt>);</tt><br>
Usage: <tt>$writememb(</tt><i>file</i><tt>, </tt><i>memory</i><tt>);</tt><br>
Usage: <tt>$writememb(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>);</tt><br>
Usage: <tt>$writememb(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>, </tt><i>stop</i><tt>);</tt><br>
<br>
Usage: <tt>$writememh(</tt><i>file</i><tt>);</tt><br>
Usage: <tt>$writememh(</tt><i>file</i><tt>, </tt><i>memory</i><tt>);</tt><br>
Usage: <tt>$writememh(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>);</tt><br>
Usage: <tt>$writememh(</tt><i>file</i><tt>, </tt><i>memory</i><tt>, </tt><i>start</i><tt>, </tt><i>stop</i><tt>);</tt><br>
</div>
<p>
These tasks write the contents of one or more memories to a file.  The
forms ending in "<tt>b</tt>" write the data in binary, while the forms
ending in "<tt>h</tt>" write the data in hexadecimal.  The files
written are of a format suitable for being read by the
<tt>$readmemb</tt> and <tt>$readmemh</tt> tasks.  If only a file name
is given, the contents of all memories in the design will be written.
If a memory name is given, only the contents of that memory will be
saved.  You can also specify a start and stop address to save a
portion of a memory.  If there are large regions of uninitialized
values in a memory, those values will not be explicitly saved.  Only
memory pages in which data has been stored will be saved to the file.

<h3>B.6 TkGate-Specific Tasks</h3>

These tasks are tasks that are not part of the normal Verilog
specification, but are specific to TkGate descriptions.  These tasks
all begin with the <tt>$tkg</tt> prefix.  Most of these tasks are only
useful when running a simulation under the TkGate GUI.  

<h4>B.6.1 $tkg$command</h4>	

<div class=display>
Usage: <tt>$tkg$command(</tt><i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt>
</div>
<p>
When the simulator is running under the TkGate GUI, TkGate and the
simulator communicate over a pipe.  This task writes a command from
the simulator to TkGate directly on that pipe.  The arguments are
combined into a string in the same way as for <tt>$display</tt>, and
the resulting string is feed directly to the TkGate GUI.  When running
Verga directly, this task performs identically to <tt>$display</tt>.
<p>
This task is subject to security settings set through the <a
href="gateOptions.html#security">TkGate Security Options</a> dialog
box.

<h4>B.6.2 $tkg$exec</h4>		

<div class=display>
Usage: <tt>$tkg$exec(</tt><i>arg1</i><tt>,</tt> <i>arg2</i><tt>,</tt> ... <tt>);</tt>
</div>
<p>
This task executes a Tcl/Tk command in the context of the TkGate GUI.
It can be used to control a <a href="vpdCreation.html">Virtual
Peripheral Device (VPD)</a>, although its use for this purpose is
currently discouraged.  The <tt>$tkg$post</tt>, <tt>$tkg$send</tt> and
<tt>$tkg$recv</tt> tasks are now the preferred tasks to use for
interacting with VPDs.
<p>
When executing this task, the arguments are combined into a string in
the same way as for <tt>$display</tt>, and the resulting string is
sent to the TkGate GUI to be executed as a Tcl/Tk command.  The
command will only be executed if it is enabled through the <a
href="gateOptions.html#security">TkGate Security Options</a> dialog
box.  There are three possible security settings: fully enabled,
enabled for registered functions, and disabled.  When enabled only for
registered functions, only Tcl commands that have been registered by a
VPD on loading can be executed.  Furthermore, the "[" and "]"
characters are not allowed in the string.  For more information on how
to use this task in designing VPDs, see the section on <a
href="vpdCreation.html">Creating Virtual Peripheral Devices</a>.
<p>
If running Verga directly, this task will simply print the simulator
command requesting a Tcl/Tk command to be executed.

<h4>B.6.3 $tkg$post</h4>		

<div class=display>
Usage: <tt>$tkg$post(</tt><i>name</i><tt>, </tt><i>id</i><tt>);</tt>
</div>
<p>
This task is used to start/post a <a href="vpdCreation.html">Virtual
Peripheral Device (VPD)</a>.  The <i>name</i> argument specifies the
name of the VPD.  The <i>id</i> argument specifies the name of a
unique identifier for this instance of the VPD.  Normally, the string
<tt>"%m"</tt> should be specified as the <i>id</i>.  The <tt>"%m"</tt>
will be replaced with the instance name of the calling module in the
same way that <tt>"%m"</tt> is expanded in the <tt>$display</tt> task.
For more information on how to use this task in designing VPDs, see
the section on <a href="vpdCreation.html">Creating Virtual Peripheral
Devices</a>.
<p>
If running Verga directly, this task will simply print the simulator
command requesting a VPD to be posted.

<h4>B.6.4 $tkg$probe</h4>	

<div class=display>
Usage: <tt>$tkg$probe(</tt><i>signal1</i><tt>,</tt> <i>signal2</i><tt>,</tt> ...<tt>);</tt>
</div>
<p>
This task is used to set a probe on a signal or signals.  You can list
an arbitrary number of signals specified either with their local
names, or with fully qualified path names.  This task will cause the
TkGate GUI to display the probed signals in the logic analyzer window
and begin displaying value changes on those signals.  You can use this
task in a simulator script to setup the signals you want to probe at
the beginning of a simulation.
<p>
If running Verga directly, this task will simply print the simulator
command requesting a probe to be set, and print value changes on that
signal until the probe is removed with and <tt>$unprobe</tt>.
<p>
If running Verga directly, this task will simply print the simulator
command setting a probe and reporting the values on the probed signals.

<h4>B.6.5 $tkg$recv</h4>		

<div class=display>
Usage: <i>value</i><tt> = $tkg$recv(</tt><i>channel</i><tt>);</tt>
</div>
<p>
The <tt>$tkg$recv</tt> task is used receive value on a channel from a
<a href="vpdCreation.html">Virtual Peripheral Device (VPD)</a>.  A
channel is essentially a queue that can be read to or written from
either from the Tcl/Tk side of a VPD, or the Verilog side.  The
<tt>$tkg$recv</tt> task dequeues and returns the next value in the
queue.  If the queue is empty, the task blocks until a value is placed
on the queue.
<p>
The channel name is an arbitrary string.  Channels are dynamically
created when referenced by a <tt>$tkg$recv</tt> or <tt>$tkg$send</tt>
task.  When used for communicating with a VPD, the channel name should
be constructed from the VPD instance name (the same name used as the
<i>id</i> in <tt>$tkg$post</tt>), followed by a "." character and a
local name.  This convention ensures that each instance of a VPD has
its own set of channels to use.  You can use <tt>"%m"</tt> in place of
the instance name which will be replaced with the instance name for
the current module.
<p>
For more information on how to use this task in designing VPDs, see
the section on <a href="vpdCreation.html">Creating Virtual Peripheral
Devices</a>.
<p>
While this task is primarily intended to be used for communication
with VPDs, you can use it in conjunction with the <tt>$tkg$send</tt>
task to send values from one Verilog thread to another.

<h4>B.6.6 $tkg$reportbreak</h4>	

<div class=display>
Usage: <tt>$tkg$reportbreak(</tt><i>id</i><tt>,</tt> <i>value</i><tt>);</tt>
</div>
<p>
This task pauses the simulation and sends a command indicating that a
breakpoint has fired.  <i>id</i> is the name of the breakpoint, and
<i>value</i> is the value that has caused the break.  This task is
primarily used for TkGate testing purposes.

<a name="tkg_send">
<h4>B.6.7 $tkg$send</h4>		

<div class=display>
Usage: <tt>$tkg$send(</tt><i>channel</i><tt>,</tt> <i>value</i><tt>);</tt>
</div>
<p>
The <tt>$tkg$send</tt> task is used send a value on a channel from the
Verilog description to a <a href="vpdCreation.html">Virtual Peripheral
Device (VPD)</a>.  A channel is essentially a queue that can be read
to or written from either from the Tcl/Tk side of a VPD, or the
Verilog side.  The <tt>$tkg$send</tt> task enqueues a value on the
queue for the specified channel.
<p>
The channel name is an arbitrary string.  Channels are dynamically
created when referenced by a <tt>$tkg$recv</tt> or <tt>$tkg$send</tt>
task.  When used for communicating with a VPD, the channel name should
be constructed from the VPD instance name (the same name used as the
<i>id</i> in <tt>$tkg$post</tt>), followed by a "." character and a
local name.  This convention ensures that each instance of a VPD has
its own set of channels to use.  You can use <tt>"%m"</tt> in place of
the instance name which will be replaced with the instance name for
the current module.
<p>
For more information on how to use this task in designing VPDs, see
the section on <a href="vpdCreation.html">Creating Virtual Peripheral
Devices</a>.
<p>
While this task is primarily intended to be used for communication
with VPDs, you can use it in conjunction with the <tt>$tkg$recv</tt>
task to send values from one Verilog thread to another.

<h4>B.6.8 $tkg$systime</h4>	
<div class=display>
Usage: <i>value</i><tt> = $tkg$systime;</tt>
</div>
<p>
This task returns the current system time as a 64-bit <tt>time</tt>
value with the number of milliseconds since January 1, 1970.

<h4>B.6.9 $tkg$unprobe</h4>	

<div class=display>
Usage: <tt>$tkg$unprobe(</tt><i>signal1</i><tt>,</tt> <i>signal2</i><tt>,</tt> ...<tt>);</tt>
</div>
<p>
This task removes one or more probes set either with the
<tt>$probe</tt> system task, or manually through the TkGate GUI.

<h4>B.6.10 $tkg$wait</h4>		

<div class=display>
Usage: <tt>$tkg$wait(</tt><i>value</i><tt>);</tt>
</div>
<p>

This task will block the calling thread for the specified number of
milliseconds.  The simulation itself will continue, and all other
threads will advance normally (unless the calling thread is the only
unblocked thread).  As an example, consider the code fragment:
<pre>
   always
     begin
       $tkg$wait(1000)
       $display("Hello World");
     end
</pre>
This will cause the message "Hello World" to be printed once per
second.

<h4>B.6.11 $tkg$waituntil</h4>	

<div class=display>
Usage: <tt>$tkg$waituntil(</tt><i>value</i><tt>);</tt>
</div>
<p>
This task blocks a thread in the same way as <tt>$tkg$wait</tt> until
a specified absolute time.  The <tt>$tkg$systime</tt> task should be
used to get a reference time to be used with <tt>$tkg$waituntil</tt>.
If the time specified by <i>value</i> is less than the current time,
<tt>$tkg$waituntil</tt> will return immediately and do nothing.  This
task can be used to create real time clocks.  For example, the
following module generates a clock signals that oscillates once per
second:
<pre>
module realclock(z);
output reg z;
time t;

  initial
    z = 1'b0;

  initial
    begin
      t = $tkg$systime;
      forever
        begin
          t = t + 500;
          $tkg$waituntil(t);
	  z = ~z;
        end
    end

endmodule
</pre>
<p>
The advantage of using <tt>$tkg$waituntil</tt> instead of
<tt>$tkg$wait</tt> to generate the clock signal is to avoid drift.  If
<tt>$tkg$wait</tt> were used instead, there would be additional real
time delay as the simulation was running between calls to
<tt>$tkg$wait</tt>.  This small error would accumulate over time
causing the number of oscillations to diverge from the proper value
over a long time period.
<p>
Real time clocks such as this can be used to create real-time
simulations of devices such as digital clocks, or other simulation
using LEDs where you wish to run them synchronized with real time.

<h4>B.6.12 $tkg$zoom</h4>	

<div class=display>
Usage: <tt>$tkg$zoom(</tt><i>factor</i><tt>);</tt>
</div>
<p>
This task sets the zoom level in the TkGate scope window reletive to
the default zoom factor.  The <i>factor</i> parameter is an integer
representing the zoom factor.  A factor of 0 sets the default zoom
factor.  Negative values represent the number of zoom-out steps
(showing more time on the x-axis), and positive values represent the
number of zoom-in steps (showing less time on the x-axis).

</body>
</html>
tkgate-doc 2.0~b10-4ubuntu2 / usr / share / tkgate / doc / systemTasks.html
