/usr/share/tkgate/locale/en/messages.old

#
#   Copyright (C) 1987-2000 by Jeffery P. Hansen
#
#   This program is free software; you can redistribute it and/or modify
#   it under the terms of the GNU General Public License as published by
#   the Free Software Foundation; either version 2 of the License, or
#   (at your option) any later version.
#
#   This program is distributed in the hope that it will be useful,
#   but WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#   GNU General Public License for more details.
#
#   You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# Last edit by hansen on Mon Aug 28 22:38:27 2006

##############################################################################
#
# Explaination of file format.
#
# Messages files are used to "localize" tkgate so that it can run under
# different languages.  Lines beginning with a '#' character are comments.
# Most entries in the file are of the form:
#
# tag value
#
# A tag is any abitrary string of non-whitespace characters.  By convention
# a dot notation is used to suggest groups of related tags.  The value of the
# tag begins at the first non-whitespace character after the tag and can include
# white space.  Normally the value is the localized text message.  By convension,
# tags beginning with a '@' character are used to control interface layout
# as opposed to being actual text.  Explainations for this tags will be given
# in preceeding comments.
#
# Multi-line comments have the form:
#
# tag	-begin-
# line1
# line2
# -end-
#
# or
#
# tag	-fillbegin-
# line1
# line2
# -end-
#
# When -begin- is used, the newlines in the text are preserved as is.  When
# -fillbegin- is used the newlines are replaced with spaces and it is assumed
# that the text will be automatically justified.
#
# If the first character of a value is a back-quote, then it is interpreted
# as a reference to another tag.  For example:
#
# foo	This is tag foo.
# bar	`foo
#
# In this instance both 'foo' and 'bar' will translate to 'This is tag foo'.
#
# The last type of entry that can occur in the file, normally at the type is
# a declaration.  Currently, the only allowed declaration is:
#
# \font-encoding	code
#
# where "code" is a font encoding such as "iso8859-2". This can be used to
# select a font encoding specific to a locale.  The default encoding
# is "iso8859-1".
#
##############################################################################

##############################################################################
#
# basic strings
#
b.new		New...
b.dismiss	Dismiss
b.close		Close
b.ok		OK
b.clear		Clear
b.cancel	Cancel
b.open		Open...
b.bitw		Bit Width
b.in		in
b.out		out
b.inout		inout
b.browse	Browse...
b.label		Label
b.find		Find
b.edit		Edit...
b.add		Add...
b.delete	Delete
b.deleteb	Delete...
b.remove	Remove
b.apply		Apply
b.anchor	Anchor
b.tech		Technology
b.enable	Enable
b.disable	Disable
b.flush		Clear

##############################################################################
#
# Main tab strings
#
tab.edit	Edit
tab.editintr	Interface
tab.simulate	Simulate
tab.cpath	Critical Path
# Width of mode selection tabs
@tab.width	150

#############################################################################
#
# MsgMgr strings (including breakpoint and script handling) 
#
@mm.width	7
mm.add		Add...
mm.delete	Delete
mm.edit		Edit...
mm.enable	Enable
mm.disable	Disable

##############################################################################
# Menu strings
#
# Menu strings (tags beginning with "menu.") can take an option prefix consisting
# of a number and a colon.   If this prefix exists, it indicates the character
# position in the string that will be underlined.  This enables keyboard shortcuts
# using the Alt key. 
#
menu.file	0:File
menu.edit	0:Edit
menu.tool	0:Tool
menu.simulate	0:Simulate
menu.module	4:Module
menu.interface	0:Interface
menu.gate	0:Gate
menu.make	0:Make
menu.help	0:Help

menu.file.new		0:New
menu.file.open		0:Open...
menu.file.openlib	5:Library Manager...
menu.file.save		0:Save
menu.file.saveas	0:Save As...
menu.file.print		0:Print...
menu.file.options	2:Options...
menu.file.quit		0:Quit
menu.file.cprop		0:Circuit Properties...

menu.edit.undo		0:Undo
menu.edit.redo		0:Redo
menu.edit.cut		0:Cut
menu.edit.copy		3:Copy
menu.edit.paste		0:Paste
menu.edit.overlay	0:Overlay Paste
menu.edit.selall	0:Select All
menu.edit.find		0:Find...
menu.edit.algnv		6:Align Ver.
menu.edit.algnh		6:Align Horz.
menu.edit.rotate	2:Rotate
menu.edit.zoomin	5:Zoom In
menu.edit.zoomout	5:Zoom Out

menu.edit.rshift	10:Bit Shift Right 
menu.edit.lshift	10:Bit Shift Left 
menu.edit.ushift	10:Bit Shift Up 
menu.edit.dshift	10:Bit Shift Down 
menu.edit.cwrotate	11:Bit Rotate C-W
menu.edit.ccwrotate	15:Bit Rotate C-C-W
menu.edit.pcwrotate	12:Port Rotate C-C-W
menu.edit.pccwrotate	16:Port Rotate C-C-W
menu.edit.autobold	Boldify Bits
menu.edit.resize	Resize Bitmap

menu.tool.move		0:Move/Connect
menu.tool.delg		0:Delete Gate
menu.tool.cutw		0:Cut Wire
menu.tool.inv		0:Invert
menu.tool.bitw		0:Bit Width
menu.tool.debug		0:Debug
menu.tool.point		0:Point
menu.tool.line		0:Line
menu.tool.rect		0:Rectangle
menu.tool.fillrect	0:Fill Rectangle
menu.tool.port		0:Port
menu.tool.select	0:Select Region


menu.tool.rot0		4:Rot 0
menu.tool.rot90		4:Rot 90
menu.tool.rot180	4:Rot 180
menu.tool.rot270	4:Rot 270
menu.tool.tclshell	0:Tcl Shell

menu.simulate.begin	0:Begin Simulation
menu.simulate.end	0:End Simulation
menu.simulate.addprobe	0:Add/Delete Probe
menu.simulate.run	0:Run
menu.simulate.pause	0:Pause
menu.simulate.step	0:Step Epoch(s)
menu.simulate.cycle	5:Step Cycle
menu.simulate.break	0:Breakpoint...
menu.simulate.script	1:Exec. Script...
menu.simulate.load	1:Load Memory...
menu.simulate.dump	1:Dump Memory...

menu.module.open	0:Open
menu.module.close	0:Close
menu.module.new		0:New...
menu.module.del		0:Delete...
menu.module.copy	0:Copy...
menu.module.rename	0:Rename...
menu.module.claim	1:Claim...
menu.module.setroot	1:Set As Root...
menu.module.prop	0:Properties...
menu.module.interface		0:Interface
menu.module.interface.set	0:Set
menu.module.interface.edit	0:Edit...

menu.gate.addport	4:Add Port
menu.gate.ioset		0:Set Type
menu.gate.anchor	0:Anchor Selected
menu.gate.unanchor	0:Unanchor Selected
menu.gate.prop		0:Gate Properties...
menu.gate.rep		0:Replicate
menu.gate.del		0:Delete
menu.gate.settech	0:Set Technology

menu.help.about		0:About...
menu.help.license	0:License...
menu.help.doc		0:Documentation...
menu.help.tut		1:Tutorials
menu.help.home		1:Home Page
menu.help.example	1:Examples

#############################################################################
# Scope Menu
#
menu.scope_file			0:File
menu.scope_sim			0:Simulate
menu.scope_trace		0:Trace
menu.scope_help			0:Help

menu.scope_file.ptrace		0:Print Trace...
menu.scope_file.close		0:Close
menu.scope_trace.zoomin		5:Zoom In
menu.scope_trace.zoomout	5:Zoom Out
menu.scope_sim.addprobe		0:Add/Delete Probe
menu.scope_sim.run		0:Run
menu.scope_sim.pause		0:Pause
menu.scope_sim.step		0:Step Epoch(s)
menu.scope_sim.cycle		5:Step Cycle
menu.scope_sim.break		0:Breakpoint...
menu.scope_sim.script		1:Exec. Script...
menu.scope_sim.load		1:Load Memory...
menu.scope_sim.dump		1:Dump Memory...
menu.scope_help.about		0:About...
menu.scope_help.license		0:License...
menu.scope_help.doc		0:Documentation...

mod.intf	Interface

port.parms	Port Parameters
port.in		In
port.out	Out
port.inout	InOut


##############################################################################
#
# Tags for built-in gate types
#

gm.io		I/O
gm.gate		Gate
gm.rgate	Reduction
gm.msi		MSI
gm.alu		ALU
gm.mem		Memory
gm.mod		Module
gm.comment	Comment
gm.frame	Frame

gm.io.switch	Switch
gm.io.dip	DIP Switch
gm.io.ground	Ground
gm.io.vdd	Vdd
gm.io.merge	Concat
gm.io.clock	Clock

gm.io.led	LED
gm.io.ledbar	LED Bar
gm.io.ledhex	7-Seg. LED (HEX)
gm.io.leddec	7-Seg. LED (DEC)
gm.io.ledseg	7-Seg. LED (Direct)

gm.io.tty	TTY

gm.gate.and	AND
gm.gate.nand	NAND
gm.gate.or	OR
gm.gate.nor	NOR
gm.gate.xor	XOR
gm.gate.xnor	XNOR
gm.gate.buf	Buffer
gm.gate.inv	Inverter
gm.gate.tribuf	Tri-Buffer
gm.gate.nmos	NMOS
gm.gate.pmos	PMOS

gm.rgate.and	AND
gm.rgate.nand	NAND
gm.rgate.or	OR
gm.rgate.nor	NOR
gm.rgate.xor	XOR
gm.rgate.xnor	XNOR

gm.alu.add	Adder
gm.alu.mult	Multiplier
gm.alu.div	Divider
gm.alu.lshift	Left Shift
gm.alu.rshift	Right Shift
gm.alu.arshift	Arith. Right Shift
gm.alu.roll	Roll

gm.mem.reg	Register
gm.mem.ff	Flip-Flop
gm.mem.ram	RAM
gm.mem.rom	ROM

gm.msi.21mux	2-1 Multiplexor
gm.msi.41mux	4-1 Multiplexor
gm.msi.81mux	8-1 Multiplexor
gm.msi.12dec	1-2 Decoder
gm.msi.14dec	1-4 Decoder
gm.msi.18dec	1-8 Decoder
    
gm.mod.inst	Module Instance
gm.mod.in	Module Input
gm.mod.out	Module Output
gm.mod.inout	Module InOut

tutorial.prev		PREVIOUS
tutorial.next		NEXT
tutorial.chapter	CHAPTER LIST
tutorial.reload		RELOAD

##############################################################################
#
# Popup menus
#
pop.make		Make
pop.tool		Tool

pop.edit.paste		Paste
pop.edit.cut		Cut
pop.edit.copy		Copy

pop.port.in		In
pop.port.out		Out
pop.port.inout		InOut

pop.wire.addseg		Add Wire Segment
pop.wire.prop		Properties...
pop.wire.hidesize	Hide Bit Width
pop.wire.showsize	Show Bit Width
pop.wire.hidelabel	Hide Label 
pop.wire.hidealllabel	Hide All Labels
pop.wire.clearalllabel	Clear All Labels
pop.wire.showlabel	Show Label 

pop.gate.open		Open
pop.gate.close		Close
pop.gate.prop		Properties...
pop.gate.addport	Add Port
pop.gate.addin		Add Input...
pop.gate.addout		Add Output...
pop.gate.addinout	Add BiDir...
pop.gate.anchor		Anchor
pop.gate.settech	Set Technology
pop.gate.delete		Delete
pop.gate.ioset		Set Type

pop.module.new		New...
pop.module.del		Delete...
pop.module.copy		Copy...
pop.module.rename	Rename...
pop.module.claim	Claim...
pop.module.setroot	Set As Root...
pop.module.prop		Properties...
pop.module.int		Edit Interface...


pop.simulate.end	End Simulation
pop.simulate.begin	Begin Simulation
pop.simulate.addprobe	Add/Delete Probe
pop.simulate.run	Run
pop.simulate.pause	Pause
pop.simulate.step	Step Epoch(s)
pop.simulate.cycle	Step Cycle
pop.simulate.break	Breakpoint...
pop.simulate.script	Exec. Script...
pop.simulate.load	Load Memory...
pop.simulate.dump	Dump Memory...

pop.interface		Interface
pop.interface.set	Set
pop.interface.edit	Edit...
pop.interface.auto	Auto Generate...
pop.interface.replace	Replace

pop.igen.type		Type
pop.igen.side		Side
pop.igen.size		Size
pop.igen.delete		Delete
pop.igen.in		in
pop.igen.out		out
pop.igen.inout		inout
pop.igen.left		left
pop.igen.right		right
pop.igen.top		top
pop.igen.bottom		bottom
pop.igen.other		other


##############################################################################
#
# Symbol editor strings
#
symed.bsave		Store
symed.file		File
symed.file.load		Load Bitmap...
symed.file.save		Save Bitmap...
symed.file.updateclose	Close and Update
symed.file.discardclose	Close and Discard
symed.help		Help
symed.help.about	About...
symed.edit		Edit
symed.edit.cut		Cut
symed.edit.copy		Copy
symed.edit.paste	Paste
symed.edit.overlay	Overlay Paste
symed.edit.rclock	Rotate Clockwise
symed.edit.rcclock	Rotate Counter-Clockwise
symed.module		Module
symed.modes		Modes
symed.cutpaste		Cut/Paste
symed.rotate		Port Rotation
symed.zoom		Zoom
symed.update		Update
symed.cancel		Cancel
symed.tab.normal	UnSelected
symed.tab.select	Selected
symed.link		Link selected to unselected
# width of symbol editor tabs
@symed.tab.width	115


##############################################################################

scope.emptymsg	Double-click on a wire to add or delete a trace.
comment.empty	[Double click to add text.]

##############################################################################
# Interface strings
#
ifile		File
imodule		Module
iblmodule	Modules
iports		Ports
ibits		Bits:
itype		Type:

#############################################################################
# Module Dialog Box
#
db.mod.name	Name
db.mod.file	File Name
db.mod.type	Type
db.mod.flags	Flags
db.mod.dataprot	Disallow editing of module definition.
db.mod.intfprot	Disallow all interface changes.
db.mod.edprot	Disallow edit mode interface changes.
db.mod.props	Properties
db.mod.inuse.0	Module is not in use.
db.mod.inuse.1	Module is in use.
db.mod.lmod.0	Module has not been modified since loading.
db.mod.lmod.1	Module has been modified since loading.
db.mod.smod.0	Module has not been modified since saving.
db.mod.smod.1	Module has been modified since saving.
db.mod.islib.1	Module is part of [%s] library.
db.mod.islib.0	Module is not a library module.
db.mod.netlist	Netlist
db.mod.hdl	HDL

db.mod.netexpl	-begin-
Define module using a
graphical editor to connect
wires between components. 
-end-

db.mod.hdlexpl	-begin-
Define module using a
textural editor to describe
behavior in Verilog.
-end-

#############################################################################
# Error List Dialog box
#
db.err.caption		Error List
db.err.explain		-fillbegin-
I am unable to enter simulation mode due
to errors in your circuit.  Select an error
message to see the error location.
-end-

#############################################################################
# Net Dialog Box
#
db.net.name	Net Name
db.net.hide	Hide Name
db.net.bits	Bit Width	
db.net.type	Net Type	
db.net.port	Port Type
db.net.in	in
db.net.out	out
db.net.inout	inout
db.net.inets	Nets

##############################################################################
#
# New circuit dialog box
#
db.newcirc.cap		New Circuit
db.newcirc.exp		-fillbegin-
Discard the current circuit and start editing
a new circuit.
-end-
db.newcirc.file		File Name
db.newcirc.topname	Top Module Name



##############################################################################
# Gate dialog box
#
@db.gate.tabwidth	*80
db.gate.signam		Signal Name
db.gate.portnam		Port Name
db.gate.iotype		Type
db.gate.bitw		Bit Width
db.gate.cyclew		Cycle Width
db.gate.phase		Phase
db.gate.duty		Duty
db.gate.port		Port
db.gate.bitws		Bits
db.gate.side		Side
db.gate.gtype		Gate Type
db.gate.gname		Gate Name
db.gate.hidenam		Hide Name
db.gate.anchor		Anchor
db.gate.cpbreak		Critical Path Partition
db.gate.butstate	Button State
db.gate.dipval		Switch Value
db.gate.range		Bit Range
db.gate.memfilenam	Memory File
db.gate.modname		Function
db.gate.general		General
db.gate.details		Details
db.gate.text		Text
db.gate.ports		Port
db.gate.delay		Delay
db.gate.parameters	Parameters
db.gate.stddelay	Standard Delay
db.gate.custdelay	Custom Delay
db.gate.catdiruse	Port Placement
db.gate.edit		Edit
db.gate.delete		Delete
db.gate.add		Add

db.gate.cat.asc.hdr	Ascending
db.gate.cat.dec.hdr	Decending
db.gate.cat.asc.exp	-fillbegin-
Bits are concatenated in ascending order from top to bottom.
-end-
db.gate.cat.dec.exp	-fillbegin-
Bits are concatenated in descending order from top to bottom.
-end-

db.gate.cat.sigdir	Signal Direction 
db.gate.cat.auto.hdr	Auto
db.gate.cat.multin.hdr	Multi-Input
db.gate.cat.singin.hdr	Single-Input
db.gate.cat.tran.hdr	Bidirectional


db.gate.cat.auto.exp	-fillbegin-
Determine signal direction automatically
from connected nets.
-end-

db.gate.cat.multin.exp	-fillbegin-
Always assume multi-port side is the
input.
-end-

db.gate.cat.singin.exp	-fillbegin-
Always assume single-port side is the
input.
-end-

db.gate.cat.tran.exp	-fillbegin-
Allow bidirectional (tran) signal flow.  Can
not be connected to switches or registers.
-end-

db.gate.tab.General.cap		General Properties
db.gate.tab.Ports.cap		Port Properties
db.gate.tab.Delay.cap		Delay Properties
db.gate.tab.Parameters.cap	Module Parameters
db.gate.tab.CLOCK.cap		Clock Properties
db.gate.tab.SWITCH.cap		Switch Properties
db.gate.tab.DIP.cap		DIP Properties
db.gate.tab.TAP.cap		Tran Properties
db.gate.tab.RAM.cap		RAM Properties
db.gate.tab.ROM.cap		ROM Properties
db.gate.tab.MODULE.cap		Module Properties
db.gate.tab.FRAME.cap		Frame Properties
db.gate.tab.LED.cap		LED Properties
db.gate.tab.AND.cap		AND Properties
db.gate.tab.OR.cap		OR Properties
db.gate.tab.XOR.cap		XOR Properties
db.gate.tab.MUX.cap		Mux Properties
db.gate.tab.DEMUX.cap		Demux Properties
db.gate.tab.CONCAT.cap		Concat Properties
db.gate.tab.COMMENT.cap		Text Properties


db.gate.tab.General.exp	-fillbegin-
View and modify basic properties of an instance.
-end-

db.gate.tab.Ports.exp	-fillbegin-
Add, edit or delete ports on an instance.
-end-

db.gate.tab.Delay.exp	-fillbegin-
Delay can be specified either as a technology or as specific values
for this instance.
-end-

db.gate.tab.Parameters.exp	-fillbegin-
Set the module parameters for this instance of this module if any are
defined.  Module parameters are used to configure delays and constant values used in a module.
-end-

db.gate.tab.details.exp -fillbegin-
Set detailed type specific properties
of a gate here. 
-end-


db.gate.tab.CLOCK.exp	`db.gate.tab.details.exp
db.gate.tab.SWITCH.exp	`db.gate.tab.details.exp
db.gate.tab.DIP.exp	`db.gate.tab.details.exp
db.gate.tab.TAP.exp	`db.gate.tab.details.exp
db.gate.tab.RAM.exp	`db.gate.tab.details.exp
db.gate.tab.ROM.exp	`db.gate.tab.details.exp
db.gate.tab.MODULE.exp	`db.gate.tab.details.exp
db.gate.tab.FRAME.exp	`db.gate.tab.details.exp
db.gate.tab.LED.exp	`db.gate.tab.details.exp
db.gate.tab.AND.exp	`db.gate.tab.details.exp
db.gate.tab.OR.exp	`db.gate.tab.details.exp
db.gate.tab.XOR.exp	`db.gate.tab.details.exp
db.gate.tab.MUX.exp	`db.gate.tab.details.exp
db.gate.tab.DEMUX.exp	`db.gate.tab.details.exp
db.gate.tab.CONCAT.exp	`db.gate.tab.details.exp

db.gate.tab.COMMENT.exp	-fillbegin-
Set the text to be displayed in a comment.
Limited html commands including links can be
used here.
-end-

db.gate.mparm.parameter	Parameter
db.gate.mparm.value	Value
db.gate.mparm.exampleA	-begin-
This module does not have any parameters.  Parameters
can be added to Verilog text modules.  The value of
each parameters can be customized for each instance
though this dialog box.  Module parameters are
declared in a parenthesized list starting with a '#'
character.  Below is an example module declaration
with a parameter named "base_value" that has a 
default value of 1'b1.
-end-
db.gate.mparm.exampleB	-begin-
module foo #(.base_value(1'b1)) (Z,A,B);
  assign Z = A ^ B ^ base_value;
endmodule
-end-

db.gate.mux.dataorder	Input Ordering
db.gate.mux.ord1.hdr	Left-to-Right
db.gate.mux.ord2.hdr	Right-to-Left
db.gate.mux.ord1.exp	-fillbegin-
Order MUX inputs from left to right.
-end-
db.gate.mux.ord2.exp	-fillbegin-
Order MUX inputs from right to left.
-end-

db.gate.demux.dataorder	Output Ordering
db.gate.demux.ord1.hdr	Left-to-Right
db.gate.demux.ord2.hdr	Right-to-Left
db.gate.demux.ord1.exp	-fillbegin-
Order DEMUX outputs from left to right.
-end-
db.gate.demux.ord2.exp	-fillbegin-
Order DEMUX outputs from right to left.
-end-

db.gate.mux.select	Selector Style
db.gate.mux.sel1.hdr	Selector on Left
db.gate.mux.sel2.hdr	Selector on Right
db.gate.mux.sel1.exp	-fillbegin-
Place the data selector on the left side of
the gate.
-end-
db.gate.mux.sel2.exp	-fillbegin-
Place the data selector on the right side of
the gate.
-end-

db.gate.demux.select	`db.gate.mux.select
db.gate.demux.sel1.hdr	`db.gate.mux.sel1.hdr
db.gate.demux.sel2.hdr	`db.gate.mux.sel2.hdr
db.gate.demux.sel1.exp	`db.gate.mux.sel1.exp
db.gate.demux.sel2.exp	`db.gate.mux.sel2.exp



db.gate.aox.extbaruse	Extender Bar Use
db.gate.aox.use.hdr	Extender Bars
db.gate.aox.nouse.hdr	No Extender Bars
db.gate.aox.use.exp	-fillbegin-
Basic gates (AND, OR, etc.) will
use extender bars as inputs
are added.
-end-
db.gate.aox.nouse.exp	-fillbegin-
Basic gates (AND, OR, etc.) will
not use extender bars as inputs
are added.
-end-


db.gate.led.type	LED Type
db.gate.led.bit.hdr	Bit
db.gate.led.bar.hdr	Bar Graph
db.gate.led.hex.hdr	7-Segment (HEX)
db.gate.led.dec.hdr	7-Segment (DEC)
db.gate.led.seg.hdr	7-Segment (Direct)

db.gate.led.bit.exp	-fillbegin-
Single-lamp led display for 1-bit signals.
-end-
db.gate.led.bar.exp	-fillbegin-
LED bar graph with one bar per bit.
-end-
db.gate.led.hex.exp	-fillbegin-
Display signal in hexidecimal.
-end-
db.gate.led.dec.exp	-fillbegin-
Display signal in decimal.
-end-
db.gate.led.seg.exp	-fillbegin-
Signal bits directly control led segments.
-end-

db.seq.back		<Back
db.seq.next		Next>

db.hdl.savecap		Multiple Modules

db.hdl.saveexp		-fillbegin-
The text buffer for the module you have just edited appears to contain more
than one module definition.  Please select one of the three actions described
to the right.
-end-

db.hdl.autoedit		Auto Edit
db.hdl.split		Split
db.hdl.comment		Comment
db.hdl.cancel		Cancel
db.hdl.ignore		Ignore

db.hdl.autoeditcap	Name Mismatch

db.hdl.autoeditexp		-fillbegin-
The textual description of the module does
not match the expected name.  Please select
an option to the right to handle the discrepancy.
-end-


cpath.cloops -fillbegin-
Combinational loops were detected in your circuit.
In order to do delay analysis on this circuit, you
must either break the loop, or mark some of the
gates in the loop as a "Critical Path Partition"
point.  Nets at which a loop was detected are
listed below.
-end-

##############################################################################
# Print dialog box
#
print.outto		Output to
print.printer		Printer
print.file		File
print.prcmd		Print Command
print.prname		Printer

print.filename		File Name
print.epssave		Save as Encapsulated Postscript.
print.doctit		Document Title
#print.prmod		Print Modules
print.epcm		Epochs/cm
print.estpg		Estimated pages
print.all		All
print.cur		Current
print.use		Used
print.sel		Selected
print.inclib		Include library modules.
print.papsz		Paper Size
print.orient		Orientation
print.portrait		Portrait
print.landscape		Landscape
print.2side		Print Double-Sided
print.opts		Options
print.scale		Scale large modules to fit page.
print.partition		Partition large modules into multiple pages.
print.incidx		Include index.
print.incgraph		Include hierarchy graph.
print.4up		Print small modules four per page.
print.range		Range Selection
print.scaleselect	Scale Selection
print.fulltr		Full Trace
print.parttr		Partial Trace
print.start		Start
print.end		End
print.outsel		Output Selection
print.filesel		Output to file
print.printersel	Output to printer
print.pageset		Page Setup
print.modulesel		Module Selection

##############################################################################
#
# TkGate 2.0 print dialog strings
#
print.ok			Print
print.printtrace.cap		Print Trace
print.printcirc.cap		Print Schematic
print.printcirc.out.exp		-fillbegin-
Choose whether to send
your schematic to the
printer or to a PostScript
file.
-end-

print.printcirc.page.exp	-fillbegin-
Choose page and printer
options here.
-end-

print.printcirc.mod.exp		-fillbegin-
Choose which modules are
to be printed and set
options controlling the
presentation.
-end-

print.printtrace.trace.exp	-fillbegin-
Choose the time range
over which to produce
output.  Also set the
scale to compute the
estimated page count.
-end-

print.tab.output	Output
print.tab.page		Page
print.tab.content	Content

##############################################################################
#
# Options dialog
#

# Width of options dialog box (not including image sidebar)
@opt.width		555
# Height of options dialog box
@opt.height		450
# Width of tabs on options dialog box
@opt.tabwidth		80
# Number of columns in list of toolbars
@opt.tool.columns	3
# Width of columns in list of toolbars
@opt.tool.colwidth	30


opt.general		General
opt.interface		Interface
opt.toolbars		Toolbars
opt.editor		HDL
opt.print		Print
opt.simulate		Simulate
opt.library		Libraries
opt.analysis		Analysis
opt.color		Color
opt.html		HTML
opt.debug		Debug


opt.identity		Identity
opt.site		Site Name
opt.username		User Name
opt.libname		Library Name:
opt.inst		Instances
opt.mods		Modules
opt.modports		Module Ports
opt.frames		Frames
opt.comment		Comments
opt.hlink		Hyperlinks
opt.wire		Single-Bit Wires
opt.bus			Multi-Bit Wires
opt.tools		Gate Tools
opt.background		Background
opt.cpath		Critical Path
opt.grid		Scope Grid
opt.logic1		Logic One
opt.logic0		Logic Zero
opt.float		Float
opt.unknown		Unknown/Conflict
opt.offled		Off LED
opt.onled		On LED
opt.zled		Floating LED
opt.restdef		Restore Defaults
opt.regudate		Region Update
opt.smoothscroll	Smooth Scrolling
opt.balloon		Enable Help Balloons
opt.safeSave		Do safe file saving
opt.saveCells		Include cells in save files
opt.showimage		Show side-bar images in dialog boxes
opt.novice		Novice Mode
opt.ckpoint		Do Checkpointing
opt.freq		Interval
opt.beak		Enable Special Modes
opt.bat			Bat
opt.trek		Star Trek
opt.miles		Miles
opt.contver		Automatic Integrity Checking
opt.showsimcmd		Display Simulator Stream
opt.estepsz		Epoch Step Size
opt.cstepsz		Clock Cycle Step Size
opt.overstep		Clock Overstep
opt.sorttraces		Sort traces alphabetically on scope
opt.vpopupdelay		Pop-Up Delay
opt.initscript		Global Initialization script
opt.posedge		Clock step stops on all clock posedges
opt.setclock		Clock step stops on clock
opt.delayfilepath	Technology Files
opt.devfilepath		VPD (Virtual Periperal Device) File Path
opt.vlibpath		Verilog Library Path
opt.vlibnames		Base Libraries
opt.display		Display
opt.input		Input
opt.security		Security
opt.undolen		Max Undo
opt.keybind		Key Binding Style
opt.useless		Enable Useless Features
opt.features		Basic Features
opt.simbase		Basic Simulator Options
opt.simclock		Clock Options

opt.cpopts		Critical Path Options
opt.maxpath		Maximum Number of Paths:
opt.cpflash		Display with Flashing Path

opt.general.fontset	Font Set

opt.simulator.noglitch	Enable simulator glitch suppression.

opt.simulator.err	Error Handling
opt.simulator.stopany	Cancel simulation on any warnings.
opt.simulator.showall	Always display warnings.
opt.simulator.showiferr	Display warnings only if with errors.
opt.simulator.ignore	Ignore all warnings.

opt.tool.file		File
opt.tool.edit		Edit
opt.tool.gateopt	Rotation/Alignment
opt.tool.gateprop	Gate
opt.tool.undo		Undo/Redo
opt.tool.zoom		Zoom
opt.tool.mode		Mode
opt.tool.module		Module
opt.tool.tech		Technology
opt.tool.simctl		Simulator Control
opt.tool.simaux		Simulator Commands
opt.tool.symmode	Mode
opt.tool.symedit	Cut/Paste
opt.tool.symport	Ports
opt.tool.symshift	Bit Shift
opt.tool.symopr		Bit Ops

opt.editor.features	Basic Editor Features
opt.editor.format	Enable Automatic Indenting
opt.editor.colorize	Enable Code Colorization
opt.editor.comments	Comments
opt.editor.strings	Strings
opt.editor.reserved	Reserved Words
opt.editor.gateword	Built-in Gates
opt.editor.instword	Module Instances
opt.editor.taskword	System Tasks
opt.editor.color	Color
opt.editor.bold		Bold
opt.editor.italic	Italic
opt.editor.indentlevel	Indentation per level:
opt.editor.beginindent	Make begin..end flush with enclosing level.
opt.editor.movesel	Enable drag-and-drop of selection.
opt.editor.returntab	Auto indent after return.



opt.vercheck		-begin-
Periodically check for new versions of tkgate over
the Internet.  Do not enable unless you have continuous
access to the Internet.
-end-

opt.general.cap		General Options
opt.editor.cap		HDL Text Editor
opt.interface.cap	Interface Options
opt.toolbars.cap	Toolbar Options
opt.print.cap		Print Options
opt.analysis.cap	-begin-
Critical Path
Options
-end-
opt.simulator.cap	Simulator Options
opt.security.cap	Security Options
opt.color.cap		Color Options
opt.html.cap		HTML/HTTP Options
opt.debug.cap		Debug Options
opt.library.cap		Library Options

opt.sec.execlevel	The $tkg$exec() system task is
opt.sec.exec		fully enabled.
opt.sec.regexec		enabled only for registered functions.
opt.sec.noexec		disabled.

opt.sec.simfeatures	Simulator Features
opt.sec.send		Enable the $tkg$command() system task.
opt.sec.open		Enable the $fopen() system task.
opt.sec.writemem	Enable the $writememb() and $writememh() system tasks.
opt.sec.enqueue		Enable the $tkg$recv() and $tkg$send() system tasks.

opt.sec.handle		Security Violation Handling
opt.sec.stop		Stop simulator when disabled feature is used.
opt.sec.warn		Display warning message when disabled feature is used.
opt.sec.ignore		Ignore attempted usage of disabled features.

opt.html.linkopts	Link Options
opt.html.browser	Browser Command
opt.html.email		e-Mail Command 

opt.color.editwin	Edit Window Colors
opt.color.scopewin	Scope Window Colors

opt.vlibadd.cap		Add Library
opt.vlibadd.exp		-fillbegin-
Enter the name of a TkGate Verilog library.  Libraries named in the autoload list
will be automatically loaded on startup.
-end-

opt.editor.exp		-fillbegin-
Set options for the HDL text editor.
-end-

opt.general.exp		-fillbegin-
Set personal identification
and basic TkGate options
on this page.  The personal
identification will be used
on printed output.
-end-

opt.interface.exp	-fillbegin-
Set options controlling the look and feel of the interface.
-end-

opt.toolbars.exp		-fillbegin-
Specify which toolbars to display.
-end-

opt.print.exp		-fillbegin-
Set default printer options
on this page.
-end-

opt.analysis.exp	-fillbegin-
These options control the
critical path analysis
function.
-end-

opt.simulator.exp -fillbegin-
These options control
the functioning of the
simulator.
-end-

opt.library.exp		-fillbegin-
Set search paths for User Device and Verilog library files.
-end-


opt.security.exp -fillbegin-
Set the simulator security options by enabling
or disabling features that may be a risk when
simulating circuits from untrusted sources.
-end-

opt.color.exp -fillbegin-
Use these options to
set the color scheme
to use in TkGate.
-end-

opt.html.exp	-fillbegin-
Set options pertaining to html commands in tkgate circuit comments.
-end-


opt.debug.exp -fillbegin-
Debugging options can
be set here.
-end-


opt.gen.basetoolbar	Core Editor Toolbars
opt.gen.simtoolbar	Simulation Mode Toolbars
opt.gen.symedtoolbar	Symbol Editor Toolbars

opt.bbar.restore	Restore Page Defaults
opt.bbar.restoreall	Restore All Defaults

##############################################################################
#
# Interface generator
#
igen.type		Type
igen.side		Side
igen.size		Size

igen.modname		Module Name:

igen.resort		Re-sort
igen.add		Add
igen.delete		Delete
igen.edit		Edit

igen.in			in
igen.out		out
igen.inout		inout

igen.left		left
igen.right		right
igen.top		top
igen.bottom		bottom

igen.other		other

igen.mod		Use ports used in module only.
igen.int		Use ports from exisiting interface only.
igen.modint		Use both module and interface ports.

igen.portsel		Port Selection
igen.portpos		Port Positions
igen.portpos.keep	Keep exiting port positions when possible.
igen.portpos.renew	Regenerate all port positionings.

igen.caption		Generate Interface

igen.description	-begin-
Create a new interface
for a module.
-end-


module.props		Module Properties

ipanel.plist		Port List
ipanel.props		Interface Properties
ipanel.itype.change	Change Type...
ipanel.itype.edsymbol	Edit Symbol...
ipanel.block		Block
ipanel.symbol		Symbol

ipanel.autogen		Auto Generate...

ipanel.itype.select	Interface Type
ipanel.itype.selectexp	-begin-
Use "block" modules for
regular rectangular
interfaces.  Use "symbol"
modules for custom
bitmaped symbols.
-end-

ipanel.block.description	Block Interface
ipanel.symbol.description	Custom Symbol Interface

ipanel.ppos.label	Block resize port position handling:
ipanel.ppos.fix		Fixed
ipanel.ppos.scale	Scaled
ipanel.ppos.grid	Grid

ipanel.warn.toblock		-begin-
You are about to change the
interface type for this module
to "block".  This will result
in the current interface data
being destroyed.

Are you sure you want to do this?
-end-

ipanel.warn.tosymbol		-begin-
You are about to change the
interface type for this module
to "symbol".  This will result
in the current interface data
being destroyed.  You will also
need to create a bitmap image
for your new symbol.

Are you sure you want to do this?
-end-

##############################################################################
#
# Block list dialog boxes
blklst.claim		Claim Module
blklst.to		To
blklst.from		From
blklst.name		Name
blklst.new.cap		Create New Module
blklst.del.cap		Delete Module
blklst.copy.cap		Copy Module
blklst.rename.cap	Rename Module
blklst.claim.cap	Claim Module
blklst.setroot.cap	Set Root Module

blklst.new.exp		-fillbegin-
Use this dialog box to create
a new module definition.  You
can create the module as a
netlist or an HDL module, but
once created you will not be
able to modify the type without
deleting and rebuilding the
module.
-end-

blklst.del.exp		-fillbegin-
Delete the definition and interface data
for the specified module.  Existing instances
of the deleted module will be retained but
will be marked as undefined.
-end-

blklst.copy.exp		-fillbegin-
Create a copy of the specified module definition.  Use this to create
a new variant of an existing module.
-end-

blklst.rename.exp	-fillbegin-
Rename a module definition.  This operation will affect only the
definition, any existing instances of this module will continue to
point to the old module name.
-end-

blklst.claim.exp	-fillbegin-
Convert a library module to a user module.  This allows the module to be
edited and to be saved with the user circuit.
-end-

blklst.setroot.exp	-fillbegin-
Make the specified module the top-level module.
-end-


find.label		Find Objects
find.exp		-fillbegin-
Look for text either in
a gate name, a wire name
or in the text of a comment.
Double click on a result to
go to that item.
-end-

find.ignorecase		Ignore Case

find.result.module	Module
find.result.type	Type
find.result.name	Object Name

#
# These are special tags used by the search feature.  Do not change their value.
#
@find.type.gate		gate
@find.type.net		net
@find.type.comment	comment

find.options		Search Options
find.results		Search Results

#
# This is a special tag used to indicate whether the position qualifier box
# should be "before" or "after" the text entry box.  Use the keywords before
# or after to indicate the position.
#
@find.qual.pos		before

find.qual.contains	Contains...
find.qual.begins	Begins with...
find.qual.ends		Ends with...
find.qual.matches	Matches...

find.dom.label		Look for objects in:
find.dom.gates		Gates
find.dom.nets		Nets
find.dom.text		Comment Text

find.search		Find:
find.target		Target

#
# These are special tags used to indicate the image file to be used for
# displaying port types.
#
@portlist.in		port_in1.gif
@portlist.out		port_out1.gif
@portlist.inout		port_inout1.gif
@portlist.in2		port_in2.gif
@portlist.out2		port_out2.gif
@portlist.inout2	port_inout2.gif


##############################################################################
#
# Circuit Dialog box
#
circ.label		Circuit Properties
circ.ident		Identification
circ.filev		File Version
circ.file		File Name
circ.title		Circuit Title
circ.discchg		Do not warn about discarding changes.
circ.extbar		Use extender bars.
circ.autostart		Enable auto-start of simulation.
circ.iniscript		Initialization Scripts
circ.noscript		No script files selected.
circ.really		Do you really want to remove '%s' from the list of initialization scripts.

circ.script.cap		Edit Script
circ.script.label	Edit script name:
circ.vlib.cap		Edit Library
circ.vlib.label		Library script name:


@circ.tabwidth		100
@circ.width		650
@circ.height		400

circ.general		General
circ.library		Libraries
circ.script		Script


circ.exp		-fillbegin-
View and modifiy circuit specific properties.
These properties will be stored with the
circuit when you save.
-end-

##############################################################################
#
# Library Manager
#
libmgr.cap		Library Manager
libmgr.library		Library
libmgr.description	Description
libmgr.status		Status
libmgr.status.load	Loaded
libmgr.status.unload	Not Loaded
libmgr.status.loadp	[Loaded]
libmgr.status.unloadp	[Not Loaded]
libmgr.exp		-fillbegin-
Select libraries to be loaded or unloaded.
-end-
libmgr.load		Load
libmgr.unload		Unload
libmgr.unloadall	Unload All

libmgr.notedit		-fillbegin-
Must be in circuit edit mode to open library manager.
-end-

#############################################################################
#
# Dynamic Verilog Module Manager
#
break.tab		Breakpoints
break.id		ID
break.state		S
break.condition		Condition
break.value		Value


##############################################################################
# Simulator
#
sim.breakpt		Breakpoint
sim.recursive	-fillbegin-
Recursive module definition found
at '%s'.  Can not start simulator or
perform critical path analysis.
-end-


##############################################################################
#
# Critical path messages
#
cp.delay		Path Delay:
cp.pathl		Path List:
cp.numpath		Number of Paths:
cp.recompute		Recompute

##############################################################################
# Error messages
#
err.nopin		Can't change selected pin.
err.badhex		Illegal hex value '%s' ignored.
err.gatanchor		Gate(s) are anchored and can not be moved.
err.protdata		Can not modify contents of protected or library module.
err.badfind		Can't find target '%s'.
err.badopendel		Can't delete open module.
err.nosrcmod		Source module '%s' not found.
err.noerr		Can not locate error.
err.misserr		Error information incomplete (did the simulator crash?)

err.badinadd		Can't add any more inputs to selected gate.
err.badoutadd		Can't add any more outputs to selected gate.
err.badinoutadd		Can't add any more inout pins to selected gate.
err.badpinchg		Can't change pin types on selected gate.
err.badnetname		Illegal characters in identifier deleted.
err.netbcrename		Identifier renamed to '%s' because of illegal characters.
err.netconfnet		Identifier renamed to '%s' because of conflict.
err.netconfgat		Identifier renamed to avoid conflict with primitive gate name
err.netconfkw		Identifier renamed to avoid conflict with reserved word.
err.badconsame		Connection refused because wires are part of the same net.
err.badconptsp		Connection refused because both wires are module ports or supply.
err.badconbitw		Connection refused because bit widths do not match.
err.badrange		Non-positive range for scope trace is not allowed.
err.badlprcmd		Unable to exectute printer command '%s'.
err.badpsopen		Unable to open file '%s' for postscript output.
err.badid		Illegal identifier '%s'.

err.protintf		Can't modifiy protected interface on module '%s'.

err.bkpt.badexp		Syntax error in breakpoint expression.  Must be one of: 'net', '!net', 'net==value', 'net!=value'
err.bkpt.badnet		Invalid net name '%s'. Names must start with a letter and contain only letters, digits and '.'.
err.bkpt.badval		Syntax error in value '%s'.  Must be decimal or verilog-style constant.
err.bkpt.toomany	Too many breakpoints.  Maximum is %d.

err.sim.badtmp		Could not save temporary file '%s' for simulator (disc full?)
err.sim.syntx		Syntax error in '%s' command.
err.sim.noincl		Include file '%s' not found.
err.sim.badedge		Illegal edge indicator '%c' in clock command.
err.sim.nobkpt		No such breakpoint '%s'.
err.sim.nonet		Can't find net '%s'.
err.sim.nogate		Can't find gate '%s'.
err.sim.badbin		Illegal charcter in binary constant '%s'.
err.sim.notswitch	Gate '%s' is not a switch, dip or register.
err.sim.badcmd		Unrecognized command '%s' in simulation script.
err.sim.isrun		Simulator is already running (Use 'Ctrl-s e' to end).
err.sim.run		Run-time Error
err.sim.cmd		Internal Command Error

err.noteditpchg		Properties can only be changed in edit mode.	
err.badeditop		Illegal interface edit mode operation.
err.badopen		Unable to open input file '%s'.
err.badlibopen		Unable to open library file '%s'.

err.nomark		Please set a mark with the left mouse button before selecting a gate type.
err.badgate		Unknown gate type '%s'.

err.badportadd		Can't add ports to gates of this type.

err.modmissing		HDL module text missing for module "%s".
err.modtoomany		Excess module definitions in module "%s".
err.modmismatch		Name mismatch between text definition and module name in "%s".

err.manypages		-fillbegin-
There are an awful lot of
pages in this document.  Are
you sure you want to print it?
-end-

err.nojump		-fillbegin-
The 'jump-to-module' feature can not be used
in simulation or critical path analysis mode.
Please navigate manully to the target block
by selecting modules and opening them with the
'>' keyboard command.  You can leave a module
you are in with the '<' keyboard command.
-end-

err.nomod		Module '%s' is not defined.
err.modlock		Logic Block is Locked!
err.closeroot		Can't close top-level module.  Use quit.
err.editonly		Command not valid when in simulation mode.
err.simonly		Command valid only in simulation mode.

err.deltop		Can not delete top-level module '%s'.
err.delprot		Can not delete protected module '%s'.
err.nodel		No deletable selection.
err.modnotdef		Module '%s' is undefined.
err.moddef		The module '%s' already exists.
err.primredef		Built-in element name '%s' can not be redefined.
err.noprop		Selected gate has no editable properites.
err.openscript		Can't open simulation script file '%s'
err.oldversion		Loaded file with obsolete version number %s (current version is %s).
err.futureversion	Loaded file saved by future tkgate version %s (this version is %s).
err.badversion		Unknown version number.  Use at your own risk.
err.nodrive		Net %s has no driver in module %s.
err.noconn		Wire %s{%d} has no connections - deleted.
err.oldportact		Please right click on port or module edge to add/change port.
err.nomodule		No selected module.
err.nomodop		No suitable modules for operation.
err.protexec		Attempted execution of protected command '%s' in $tkg$exec().

err.backupfail		Unable to create backup file '%s'.

err.yy.badprop		Ignoring unknown circuit property '%s'.
err.yy.baddata		Bad data type supplied for circuit property '%s'.
err.yy.nosym		No current module symbol.
err.yy.badicon		Bad icon type '%s'.
err.yy.toomuchdata	Too much icon data.
err.yy.nosyminst	Missing symbol %d on instance %s of %s.
err.yy.badmodprop	Ignoring unknown module property '%s'.
err.yy.badmoddata	Bad data type supplied for module property '%s'.
err.yy.badprim		Unknown primitive name '%s'.
err.yy.nonet		Undeclared net '%s'.
err.yy.bogussave	Bogus save data detected. circuit may be damaged.
err.yy.pinformat	Illegal pin name format '%s'.
err.yy.pinname		Pin name '%s' not defined for gate type '%s'
err.yy.nonetpos		No net for position %d on gate %s.


err.corruptnewsave	-fillbegin-
TkGate was able to save your file in '%s', but it appears
to be corrupted.  If you have checkpointing enabled try
loading one of the checkpoint files.  Use 'tkgate -V' to
check the integrety of a save file.
-end-

err.corruptsave		-fillbegin-
TkGate detetected a problem while trying to save the file '%s'.
The existing file has been left unmodified and the damaged file has
been written to '%s'.  If you have checkpointing enabled you
can try loading one of the checkpoint files.  You can also use
'tkgate -V' to check the integrety of a save file.
-end-

err.badsave		-fillbegin-
A problem has occured trying to open or write the file '%s'.  Check
file/directory protections and or disk space.
-end-

err.nosafesave		-fillbegin-
A problem has occured attempting to save '%s'.  If you wish, you can
try again without save validation.  If you say "no", the original file
will remain unmodified.  If you say "yes" the original file will be
overwritten, but may be destroyed if a problem occurs.  Would you like
to attempt an unvalidated save?
-end-

err.noback		-fillbegin-
File was created by tkgate
%s, and may not be readable
by versions earlier than
current version (%s) if you
save.
-end-


##############################################################################
#
# Internal error messages (indicating a problem with tkgate)
#
err.internal.nomod	internal error: Failed to find module '%s'.


##############################################################################
# Informational messages
#
msg.selwire		Selected %s named '%s'.
msg.selgate		Selected %s named '%s'.
msg.selblock		Selected %s block named '%s'.
msg.iselwire		Selected port '%s' on block '%s'.
msg.iselgate		Selected %s named '%s' (huh? this message should be impossible).
msg.iselblock		Selected module interface for '%s'.

msg.modoverwt		Destination module '%s' already exists.  Overwrite?
msg.foundgate		Found gate named '%s'.
msg.foundwire		Found wire named '%s'.
msg.searchagn		Target string '%s' not found.  Hit 'find' to restart search again.
msg.sim.chgtoroot	Simulation mode requires root module at top of edit stack.
msg.sim.nogatemod	Simulation mode requires concrete module stack.
msg.setinterface	Set module interface for '%s'.
msg.needsel		Please select a module instance.
msg.wroteckpt		Checkpointed to %s...
msg.save		Saved circuit to '%s'.
msg.reallynew		Circuit has been modified.  Do you really want to discard your changes and create a new circuit?
msg.reallyquit		Circuit has been modified.  Do you really want to exit?
msg.notlib		Module '%s' is not a library module.

##############################################################################
# Miles messages (Activated when Miles Bader uses tkgate)
#
miles.msg1		Only a fool would put %s%s there, Miles.
miles.msg2		That's a really stupid place to put %s%s, Miles.
miles.msg3		That's a terrible place for %s%s, Miles.
miles.msg4		Miles, you are a fool for putting %s%s there.
miles.msg5		Only you would put %s%s there, Miles.
miles.msg6		Putting %s%s there is proof of your absolute stupidity, Miles.
miles.msg7		Why don't you give up Miles, this is a stupid circuit.
miles.msg8a		It's pointless to continue, Miles.
miles.msg8b		It's obvious you can't design a circuit


#############################################################################
#
# Error messages generated by verga
#
verga.err.OK			Don't worry, be happy.
verga.err.INPORT		Port size mismatch on input port '%s'.
verga.err.OUTPORT		Port size mismatch on output port '%s'.
verga.err.FLOATNET		Net '%s' has no drivers (floating net).
verga.err.DIRECTCONN		Direct connect operator '=>' unsupported.  Treated as '*>'.
verga.err.MEMADDR		Attempt to write to memory %s with unknown address.
verga.err.MEMBITS		Attempt to write to memory %s with unknown bitrange.
verga.err.BADARRAYUSG		Array '%s' used in expression without index.
verga.err.BADARRAYLHS		Array '%s' used without index on left-hand-side.
verga.err.BADCLOSE		Attempt to close non-open descriptor in task '%s'.
verga.err.BADAUTORNG		Auto range [*] is only valid with 'wire' declaration.
verga.err.BADGATERNG		Bad gate instance range expression.
verga.err.BADARGVALUE		Bad value for argument %s in task %s.
verga.err.DIVZERO		Divide by zero.
verga.err.NODIV			Divide/module unsupported on this machine - sizeof(short) must be 2.
verga.err.BADEDGEEVENT		Event on multi-bit net '%s' can not have posedge/negedge.
verga.err.NEEDEDGE		Must specify posedge or negedge on event for %s.
verga.err.ASGNEVENT		Event wait on assign is illegal.
verga.err.PROTTASK		Execution of protected system task '%s' blocked.
verga.err.NEEDIDENT		Expecting identifier for argument %s of task '%s'.
verga.err.BADOP			Expression operator error in '%s'.
verga.err.NOREAD		Failed to load source file '%s'.
verga.err.MEMFILE		Failed to open memory file '%s'.
verga.err.WRONGMOD		Found module '%s' when expecting '%s'.
verga.err.NOTPARM		Identifier '%s' in constant expression is not a parameter.
verga.err.BADADDR		Illegal address range on port '%s'.
verga.err.BADADDRSPEC		Illegal address range specification '%s'.
verga.err.BADCHAR		Illegal character (%s) '%s'.
verga.err.BADEVENT		Illegal event control expression.
verga.err.BADCONSTOP		Illegal operator in constant expression.
verga.err.BADXOP		Illegal operator in expression.
verga.err.NETREDEF		Illegal redefinition of net '%s'.
verga.err.BADINOUT		Inout connections must be net-to-net on port '%s'.
verga.err.MODUNDEF		Instance of undefined module '%s'.
verga.err.BADASGNLHS		Invalid left-hand-side in 'assign'.
verga.err.LHSNOTREG		Illegal use of '%s' in left-hand-side of assignment.
verga.err.BADLHS		Invalid left-hand-side in assignment.
verga.err.BADOUT		Invalid output assignment.
verga.err.NOTREG		Memories must be declared as register.
verga.err.PORTMIX		Mixed named and unnamed ports on interface '%s' of '%s'.
verga.err.REPCASE		More than one default: in case statement.
verga.err.NOMEM			No current memory in memory file read.
verga.err.BADCMD		No such command '%s'.
verga.err.CMDNOTNET		No such net '%s' in '%s' command.
verga.err.MEMNONBLK		Non-blocking assignments to memories not implemented.
verga.err.NOTPPORT		Parameter '%s' is not declared as a port.
verga.err.REDEFP		Parameter redefines identifier '%s'.
verga.err.PORTNOTDEF		Port '%s' on interface '%s' is not defined in module '%s'.
verga.err.NOCONN		Port '%s' has no connections on interface '%s' of '%s'.
verga.err.MULTCONN		Port '%s' has multiple connections on interface '%s' of '%s'.
verga.err.PORTCOUNT		Port count does not match definition on interface '%s' of '%s'.
verga.err.BADPRTRANGE		Range on port '%s' is not numeric.
verga.err.BADARRAYRNG		Range specification not allowed for memory reference of '%s'.
verga.err.CMDMODREDEF		Redefinition of dynamic module '%s'.
verga.err.REDEF			Redefinition of identifier %s.
verga.err.PROTTASKSTOP		Simulation stopped on attempted execution of protected system task '%s'.
verga.err.NOTMEM		Specified net '%s' is not a memory.
verga.err.CMDNOTMEM		Specified net '%s' is not a memory in '%s' command.
verga.err.SYNTAX		Syntax error.
verga.err.TOOFEWPP		Too few parameter ports on instance %s.
verga.err.OPENTOOMANY		Too many files open in task '%s'.
verga.err.TOOMANYPP		Too many parameter ports on instance %s.
verga.err.NOTOP			Top-module '%s' not defined.
verga.err.BADOPEN		Unable to open output file '%s' in task '%s'.
verga.err.CMDNOMOD		Undefined dynamic module '%s' in '%s' command.
verga.err.BADEVENTNET		Undefined net '%s' in event control expression.
verga.err.NOTASK		Undefined task '%s'.
verga.err.NOTDEF		Undefined variable '%s'.
verga.err.BADRANGE		Unsupported bit range [%s] on net %s (must be of form [n:0]).
verga.err.GATEUNIMP		Unimplemented primitive gate instance type.
verga.err.USAGE			Usage: thyme [options][files...]
verga.err.CLSDWRITE		Write to closed descriptor.
verga.err.PRIMPTCOUNT		Wrong number of ports on primitive gate instance '%s'.
verga.err.CMDARGS		Wrong number of arguments in '%s' command.
verga.err.YYERROR		YYError - %s.
verga.err.TASKARGS		Task '%s' called with wrong number of arguments.
verga.err.BADSTART		Illegal start value in task '%s'.
verga.err.BADSTOP		Illegal stop value in $readmemb.
verga.err.SPECTASKUSG		Task %s must be used in a specify block.
verga.err.BADSPECTASK		Task %s can not be used in a specify block.
verga.err.TIMING		Timing violation at %s in %s[%s] %s.
verga.err.NOIFDEF		No matching `ifdef/`ifndef for %s declaration.
verga.err.BADSPECLVAL		Bit-ranges on path delay specifiers unsupported.
verga.err.PATHDITEM		Unsupported construct in module with path-delay specification.
verga.err.PATHDINOUT		Use of 'inout' in module with path-delay specification is unsupported.
verga.err.PATHDLOOP		Loops in modules with path-delay specification are unsupported.
verga.err.TASKREDEF		Redefinition of task or function '%s' in module '%s'.
verga.err.TASKASFUNC		Task '%s' used as function.
verga.err.FUNCASTASK		Function '%s' used as task.
verga.err.TASKBADTYPE		Non-register type used in task or function.
verga.err.TASKBADPORT		Only input ports are allowed on functions.
verga.err.IE_TASK		Task definition '%s' found outside module - internal error.
verga.err.IE_NONET		Failed to find net '%s' - internal error.
verga.err.IE_BADTYPE		Bogus port type for port '%s' - internal error.
verga.err.IE_NOOP		Can not find operator description -- internal error.
verga.err.IE_NONEXPCTL		Event control @(*) applied to non-expression - internal error.
verga.err.IE_NONSTATCTL		Event control @(*) applied to non-statment - internal error.
verga.err.IE_BADEXP		Unexpected expression type %s - internal error.
verga.err.IE_BADVAR		Undefined variable or unknown net - internal error.
verga.err.IE_BADSTATE		Unexpected internal state at %s  - internal error.
verga.err.IE_RETURN		Executed BCReturn bytecode with empty return stack - internal error.


##############################################################################
# Balloon Help
#

ho.net.in		Single-Bit Input
ho.net.out		Single-Bit Output
ho.net.inout		Single-Bit Inout
ho.net.in2		Multi-Bit Input
ho.net.out2		Multi-Bit Output
ho.net.inout2		Multi-Bit Inout
ho.net.wire		Single-Bit Wire (Name Visible)
ho.net.wire2		Multi-Bit Wire (Name Visible)
ho.net.hwire		Single-Bit Wire (Name Hidden)
ho.net.hwire2		Multi-Bit Wire (Name Hidden)
ho.net.reg		Single-Bit Reg
ho.net.reg2		Multi-Bit Reg


ho.opt.tool.file		Save, load of circuit files
ho.opt.tool.edit		Cut, Paste and Find operations
ho.opt.tool.gateopt		Gate rotation and alignment operations
ho.opt.tool.gateprop		Basic editing of gates
ho.opt.tool.undo		Undo and redo operations
ho.opt.tool.zoom		Zoom in and zoom out
ho.opt.tool.mode		Select the editing tool
ho.opt.tool.module		Create, delete, rename,etc. of module definitions
ho.opt.tool.tech		Select default technology for gates
ho.opt.tool.simctl		Start, stop and pause of simulator
ho.opt.tool.simaux		Auxliary simulator commands (read/write memory files, etc.)
ho.opt.tool.symmode		Selecting editing tool in symbol editor
ho.opt.tool.symedit		Cut and paste operations for symbol editor
ho.opt.tool.symport		Port rotation operations for symbol editor
ho.opt.tool.symshift		Shift the bit map or portion of bitmap
ho.opt.tool.symopr		Miscellaneous symbol editor operations

ho.opt.editor.movesel		-begin-
If this option is enabled, a selected block of
text can be grabbed with the mouse pointer and
moved to a new location.
-end-

ho.opt.editor.format		-begin-
If enabled, verilog source code will be automatically
indented when pressing the tab key.
-end-

ho.opt.editor.indent		-begin-
Number of spaces to indent per level.
-end-

ho.opt.editor.rtab		-begin-
Automatically indent the current line
and tab to the appropriate level when
pressing the return key.
-end-

ho.opt.editor.beginindent	-begin-
Causes a begin..end block to be indented
to the same level as its parent block.
-end-

ho.opt.editor.colorize		-begin-
Enable context-dependent colorization of
code according to the options listed below.
-end-

ho.hdl.splitexp		-begin-
Multiple modules in the HDL text will
be split into different modules defining
new modules as necessary.  Any name
conflicts will be resolved by slightly
modifying module names as necessary.
-end-

ho.hdl.commentexp	-begin-
Modules other than the first module or
module matching the expected name will
be converted to HDL comments.
-end-

ho.hdl.autoeditexp	-begin-
Automatically edit the HDL description
to fix the module name.
-end-

ho.hdl.cancelexp	-begin-
Take no action and continue editing
the current module.
-end-

ho.hdl.ignoreexp	-begin-
Ignore the inconsistency and continue
with the selected action.
-end-

ho.new		-begin-
Clear the current circuit,
and start editing a new one.
-end-

ho.open		Open a circuit from a file.
ho.save		Save circuit to current file.
ho.saveas	Save circuit to specified file.
ho.print	Print current circuit.
ho.library	Open the library manager.

ho.symed.tab.normal	-begin-
Edit the unselected symbol bitmap.
-end-

ho.symed.tab.select	-begin-
Edit the selected symbol bitmap.
-end-

ho.move		-begin-
Move/Connect - By clicking and dragging you can:
  Set the position for a new gate
  Move gates and wires
  Connect wires
By double-clicking you can:
  Edit gate, wire and port properties
  Edit comment text
-end-

ho.delgat	-begin-
Delete Gate - Use this
tool to delete gates.
-end-

ho.cutw		-begin-
Cut Wire - Use this
tool to cut wires.
-end-

ho.inv		-begin-
Invert - Use this tool to add
or remove inverters from gate ports.
-end-

ho.bitw		-begin-
Net Attributes - Use this tool to change
the attributes of a net.  The bit size
and wire type of nets selected with this
tool will be changed to the those shown
in the drop-down boxes to the right.
-end-

ho.ipanel.prot		-begin-
Do not allow the definition of
a module to be modified.
-end-

ho.ipanel.protint	-begin-
Do not allow the interface of
a module to be modified.
-end-

ho.ipanel.proted	-begin-
Do not allow the interface of a module to
be modified except through the interface
editor.  Use this to prevent accidental
modification of the interface in the
main edit window.
-end-

ho.ipanel.scale		-begin-
Scale the distance between ports
as a module is resized.
-end-

ho.ipanel.fix		-begin-
Keep the distance between ports
fixed even if the module is resized.
-end-

ho.mod.open	Open the selected module.
ho.mod.close	Close the current module.

ho.mod.new	Create a new module type.
ho.mod.del	Delete a module.
ho.mod.copy	Copy a module.
ho.mod.rename	Rename a module.
ho.mod.claim	-begin-
Convert a library module to
a regular module.
-end-
ho.mod.setroot	-begin-
Designate a module to
be the root module.
-end-

ho.mod.type.allparts	Set of Libraries
ho.mod.type.partlib	Library
ho.mod.type.part	Library module
ho.mod.type.unknown	Unknown module type
ho.mod.type.unused	Set of unused modules
ho.mod.type.conflict	Module recursion
ho.mod.type.root	Top-level module
ho.mod.type.netlist	Netlist module
ho.mod.type.Lnetlist	Netlist module (locked)
ho.mod.type.hdl		HDL module
ho.mod.type.Lhdl	HDL module (locked)

ho.undo	Undo previous action(s)
ho.redo	Redo undone action(s)

ho.tab.edit		-begin-
Primary editing mode.
-end-


ho.tab.interface	-begin-
Edit module interfaces.  While in interface
mode, double click on a module in the module
list to edit its interface, or on the root
module to display all interface.
-end-


ho.tab.simulate		-begin-
Start the simulator, open the logic analyzer
and execute any initialization scripts if defined.
-end-


ho.tab.cpath		-begin-
Find critical paths in a circuit.
-end-

ho.log		-begin-
Log of tkgate messages including
error messages, information messages
and simulator console output.
-end-

ho.simgo	-begin-
Run simulator in continuous execution mode.
Note that combinational circuits simulate
only until the circuit reaches steady state.
-end-

ho.simpause	-begin-
Pause a continuously running simulation.
-end-

ho.simstep	-begin-
Step a fixed interval of time.
Open the simulation options
window to set the step size.
-end-

ho.simclock	-begin-
Step a fixed number of clock
cycles.  Open the simulation options
window to set the step size.
-end-

ho.simstop	-begin-
End the current simulation
and return to edit mode.
-end-

ho.simbreak	-begin-
Edit the current breakpoints.  Simulation
will be halted when a breakpoint condition
becomes true.  Breakpoints can be edited
in both simulation mode and edit mode.
-end-

ho.simexec	-begin-
Manage the set of active scripts.
-end-

ho.simoptions	-begin-
Set various options that control the simulation.
-end-

ho.simload	-begin-
Load memory with contents of
a .mem file.
-end-

ho.simdump	-begin-
Dump the contents of a memory
to a .mem file.
-end-

ho.sim.break	-begin-
Enter a simulator breakpoint.  Breakpoints are expressions
which cause the simulator to pause execution when they become
true.  Currently only simple expressions with a single
relational operator such as "w1 == 0" or "w7 != 8" are
supported.  Expressions such as "w8" or "!w2" may also be
used to test for non-zero and zero values respectively.
-end-

ho.f.modlist	-begin-
OBSOLETE
-end-

ho.f.modlisttab	-begin-
List of all modules currently loaded.
You can display the list in either
alphabetical or hierarchical form
by selecting the appropriate tab.
Drag modules to the edit window to
create new instances.
-end-

ho.netlist	-begin-
List of nets in the current module.
The symbol to the left of the name
indicates whether the net is single
bit (green) or multi-bit (red).  An
"A" shown in the symbol indicates
that the net name is marked as
visible.
-end-

ho.ports	-begin-
List of ports on the interface
of the module displayed in the
edit window.  The symbol before
the port indicates the direction
of the port.
-end-

ho.status.logo		-begin-
Simulation status indicator.  If the iron gate
logo is shown, tkgate is in edit mode.  If the
quadrapedal AND gate is shown, tkgate is in
simulation mode.  If the AND gate is stationary,
the simulation is paused, and if it is walking
the simulation is running.
-end-

ho.status.msg		Messages from tkgate are displayed here.

ho.status.block		The stack of modules being edited.

ho.status.file		-begin-
The current file being edited.  A '*' indicates
that the buffer has been modifed since
the last save.
-end-

ho.print.selall		Print all modules currently loaded by TKGate.
ho.print.selcur		Print only the current module in the TKGate edit window.
ho.print.seluse		-begin-
Print all modules "in use". In use modues are 
those that are a decendent of the root module.
-end-

ho.print.fulltrace	Print the entire trace.

ho.print.parttrace	-begin-
Print a portion of the trace.  Enter the starting
and stopping times in the entry windows below, or
use the right mouse button to select a range on the
scope window (use shift-right to select long ranges).
-end-

ho.print.parttracestart	Starting time of trace output.
ho.print.parttraceend	Ending time of trace output.


ho.print.selsel		-begin-
Print only the modules selected below.  Use
the control key to select multiple modules.
-end-

ho.print.modlist	Select the modules to be printed.

ho.circuit.discchg	-begin-
TkGate will not display a warning if you
discard changes without saving.
-end-

ho.circuit.extbar	-begin-
Basic gates (AND, OR, XOR) will use
extender bars to handle many input
gates.
-end-

ho.circuit.autostart	-begin-
If enabled, simulation will begin as
soon as the simulation pane is selected.
-end-

ho.cmd.bitw		-begin-
Wires selected with the ribbon
cable tool will be set to this
bit width.
-end-

ho.edgat.signam		-begin-
The name of the selected signal on the
selected gate.  You can change the name
of the signal by editing it here.
-end-

ho.edgat.port		-begin-
The name of the port for this signal
on the gate.  This field can only be
edited for module instances.
-end-

ho.edgat.iolab		-begin-
The direction of the selected signal
on the selected gate.  This field can only
be edited for module instances.
-end-

ho.edgat.bitlab		-begin-
The bit width of the selected signal
on the selected gate.  You can change the
bitwidth by editing it here.
-end-

ho.edgat.cycle		The total number of epochs in a clock cycle.
ho.edgat.phase		The starting point of the cycle (in percent).
ho.edgat.duty		The percent of the cycle, the clock is low.


ho.edgat.hide		-begin-
Set this flag to disable
display of gate name.
-end-

ho.edgat.gtype		Type of the gate.
ho.edgat.gname		Name of this gate instance.
ho.edgat.ganchor	Set this flag to anchor the position of a gate.
ho.edgat.gx		X coordinate of gate.
ho.edgat.gy		Y coordinate of gate.

ho.edgat.swstate	-begin-
The initial state of the switch to use when
starting a simulation.
-end-

ho.edgat.dipstate	-begin-
The initial state of the dip switch to use
when starting a simulation.
-end-

ho.edgat.range		The range of bits to pull off a bus.

ho.edgat.memfile	-begin-
The file with the initial state for this memory.
This file is read when the simulator is started.
-end-

ho.edgat.func		The function type of this module.
ho.edgat.frame		The frame label.

ho.traceprint		Print trace logic trace. 

ho.showxhair		-begin-
If this button is depressed, a vertical crosshair
line will be displayed in the scope window.
-end-

ho.opt.general.fontset	-begin-
Specifies the basic font size to
use in the tkgate interface.  This
option will not take effect until
restarting tkgate.
-end-

ho.opt.sec.send		-begin-
Enabling the $tkg$command() system task will allow
user circuits to send arbitrary simulator control
commands to the tkgate GUI.  This includes the ability
to execute arbitrary shell commands.  If the simulator
will be used to execute untrusted circuits, it is
recommended that this task be disabled.  Enabling this
option has a very high security risk.
-end-

ho.opt.sec.open		-begin-
Enabling the $fopen() system task will allow user
circuits to write to any file that the user invoking
tkgate has access to.  Enabling this option has a
high security risk.
-end-

ho.opt.sec.writemem	-begin-
Enabling the $writememb() and $writememh() system tasks
will allow user circuits to write to any file that the
user invoking tkgate has access to.  Enabling this option
has a high security risk.
-end-

ho.opt.sec.enqueue	-begin-
Enabling the $tkg$recv() and $tkg$send() system tasks
will enable virtual peripheral devices to send messages
to tkgate circuits.  Enabling this option has a low
security risk.
-end-

ho.opt.ssave		-begin-
Perform consistency checks on circuit
files before overwriting existing save
file to verify that there are no problems
with the save file.
-end-

ho.opt.sec.exec		-begin-
Fully enabling the $tkg$exec() system task allows user
circuit to execute arbitrary tcl/tk commands including
the ability to execute arbitrary shell commands.  Enabling
this option has a very high security risk.
-end-

ho.opt.sec.regexec		-begin-
Enabling the $tkg$exec() system task for registered functions
allows user circuits to execute only tcl/tk commands that have
been registered as safe.  As long has all Virtual Peripheral
Device files are trusted, enabling $tkg$exec() at this level
should prevent dangerous commands from being executed.  Enabling
this option has a medium security risk.
-end-

ho.opt.sec.noexec		-begin-
Fully disabling the $tkg$exec() command will prevent user
circuits from executing tcl/tk commands.  This will make it
impossible to use Virtual Peripheral Devices.  Selecting this
option has a minimal security risk.
-end-

ho.opt.sec.stop		-begin-
If this setting is enabled, the simulation will be terminated
as soon as any attempt is made by the user circuit to execute
a disabled feature.
-end-

ho.opt.sec.warn		-begin-
If this setting is enabled, the simulation will continue, but
an error message will be displayed when any attempt is made by
the user circuit to execute a disabled feature.
-end-

ho.opt.sec.ignore	-begin-
If this setting is enabled, use of any disabled features will
be ignored and no error messages will be displayed.
-end-

ho.opt.html.browser	-begin-
Command to be execute when the user clicks on a link to
an html file.  A "%s" in the command will be replaced
with the link URL. 
-end-

ho.opt.html.email	-begin-
Command to be execute when the user clicks on a link to
send an e-mail message.  A "%s" in the command will be
replaced with the link URL.
-end-

ho.opt.fsave		-begin-
Save tkgate internal cells with circuit
data.  This will increase save file size
by about 20% for a typical circuit, but
will result in save files that can be
exported to third party tools.
-end-

ho.opt.sorttraces	-begin-
If this option is enabled, traces on the
scope window will be displayed in sorted
order.  If this option is disabled, traces
on the scope window will be displayed in
the order in which the probes were set.
-end-

ho.opt.sim.noglitch	-begin-
If this option is enabled, rapidly changing
inputs to a gate will cause the gate to
output unknown rather simply the time shifted
input signal.  This can eliminate spurious
events and prevent oscilations in gate-level
sequential circuits.
-end-

ho.opt.sim.tech		-begin-
List of files to load as potential "technology"
files.  Technology files specify delay and area
estimates for built-in gates.
-end-

ho.opt.sim.err		-begin-
Select how warnings from the simulator
should be handled.
-end-

ho.opt.sim.err.stopany	-begin-
Do not simulate the circuit if there are any
warnings in the circuit, even if there are no
actual erros.
-end-

ho.opt.sim.err.showall	-begin-
Always show warnings in the circuit, even if
there are no errors.  If there are only warnings,
the simualtor will be started and the list of
warnings will be displayed in a separate window.
-end-

ho.opt.sim.err.showiferr	-begin-
Show warnings only if there are also errors
in the circuit.  If a circuit contains only
warnings, they will be ignored and the simulator
will be started.
-end-

ho.opt.sim.err.ignore		-begin-
Never display warning messages, even if there
are errors in the circuit.
-end-

ho.opt.lib.vpath		-begin-
List of directories to search for tkgate library
files.  Library files should have a .v extention
and contain modules useful for use in user circuits.
-end-

ho.opt.lib.vlib			-begin-
List of libaries that should automatically be loaded
when tkgate starts.
-end-

ho.opt.lib.vpd			-begin-
List of directories to search for virtual peripheral
devices.  Virtual peripheral devices have a .tcl
extension and typically implement a GUI representing
a peripheral device that can be controlled by a user
circuit.
-end-

ho.opt.undolen		-begin-
Maximum number of undo actions to retain.
-end-

ho.opt.name		-begin-
User name to be used on tkgate generated
reports such as circuit printouts.
-end-

ho.opt.site		-begin-
The name of the site where tkgate is
installed.  This name will be used on
any printer or postscript output.
-end-

ho.opt.smooth		-begin-
If this option is enabled, scrolling will
be optimized by using bitmap copies instead
of a complete redisplay.  You can turn this
off if there are any problems with your server.
-end-

ho.opt.clip		-begin-
If this option is enabled, clipping will be
used to update only the exposed portion of
the window on a redisplay.  Otherwise the
entire display will be redrawn for all
exposures.
-end-

ho.opt.outmove		-begin-
If this option is enabled, only an outline
of module instances being moved will be displayed
while dragging.  Use this feature only on machines
with slow displays.
-end-

ho.opt.bhelp		-begin-
If this option is enabled,  help balloons will 
be activated.  Help balloons, such as this one,
provide tips on interface elements when the
mouse is over them.
-end-

ho.opt.novice		-begin-
If no other circuit is specified on the command
line.  A TkGate tutorial will be disaplyed as
the initial circuit on start up.
-end-

ho.opt.debug		-begin-
Enables several debugging features
only useful to TkGate developers.
-end-

ho.opt.ckpt		Enable checkpointing of unsaved circuits.
ho.opt.ckptfreq		Frequency of checkpoints in seconds.

ho.opt.beak		-begin-
Enable these totally useless features.
If you disable this option, the useless
features checkbox will no longer appear
in this dialog box.  The only way to
see the useless features again will be
to edit your .tkgate2-properties file.
-end-

ho.opt.miles		-begin-
If this mode is enabled, TkGate will
periodically insult the intelligence of
the user.
-end-

ho.opt.bat		-begin-
If this mode is enabled, TkGate will
set up an enviornment for designing a
bat computer.
-end-

ho.opt.trek		Beam me up Scoty!

ho.opt.simstep		-begin-
The number of epochs to advance when
the step command is issued.
-end-

ho.opt.ckstep		-begin-
The number of clock cycles to advance
when the clock step command is issued.
-end-

ho.opt.ckover		-begin-
The number of epochs past rising edge
of the clock to advance when the clock
step command is issued.
-end-

ho.opt.vpopupdelay		-begin-
The delay in milliseconds between pressing
and holding the mouse button and the display
of a signal value.  On some systems, short
delay values interfere with the ability to
recognize a double click.  If you have this
problem, increase this value.  Values between
1 and 10000 are allowed.
-end-

ho.opt.init		-begin-
A simulation script file to execute
automatically when simulation of any
circuit is initiated.  Do not use this
for circuit specific scripts, use the
circuit properties instead. 
-end-

ho.opt.ckall		-begin-
If this mode is enabled, the clock step
command will pause the simulation on the
positive edge of any clock in the circuit.
-end-

ho.opt.ckspec		-begin-
If this mode is enabled, the clock step
command will pause the simulation only on
the positive edge of the specified clock.
-end-

ho.opt.keybind		-begin-
Specifies the basic style for key
bindings.  If you change this
option, bindings will be updated
immediately, but you will need to
restart tkgate to see any user
defined keybindings.
-end-

ho.deftech		-begin-
Default technology for new gates.
Affects delay of gates. To change
the technology of a specific gate,
open its properties box (double
click) and select the "Delay" tab.
-end-

ho.techbut		-begin-
Use delays from standard technology
definition file.  To add custom
technologies, add them to the list
in the "File -> Options -> Simulate"
menu.
-end-

ho.custbut		-begin-
Set custom delay values for this gate.
-end-

ho.contver		-begin-
Continuously verify the integrity of internal
data structures after every operation.
-end-

ho.simwatch		-begin-
Display commands sent between
the GUI and the simulator.
-end-

ho.symed.point		-begin-
Pixel edit mode.  Use the left
mouse button to set pixels and
the right button to clear them.
-end-

ho.symed.line		-begin-
Line mode.  Use the left
mouse button to set pixels and
the right button to clear them.
-end-

ho.symed.rect		-begin-
Rectangle mode.  Use the left
mouse button to set pixels and
the right button to clear them.
-end-

ho.symed.fillrect	-begin-
Filled rectangle mode.  Use the
left mouse button to set pixels
and the right button to clear them.
-end-

ho.symed.select	-begin-
Bitmap select mode.  Use the left
mouse buttons to select regions of
the bitmap and do cut and paste
operations on the selection.
-end-

ho.symed.port	-begin-
Port select mode.  Select ports and
move them or rotate them.
-end-

ho.symed.rshift		Shift selected pixels right.
ho.symed.lshift		Shift selected pixels left.
ho.symed.ushift		Shift selected pixels up.
ho.symed.dshift		Shift selected pixels down.
ho.symed.cwrotate	Rotate selected pixels clockwise.
ho.symed.ccwrotate	Rotate selected pixels counter-clockwise.
ho.symed.autobold	Make selected image bold.
ho.symed.resize		Resize the image editor.

ho.tool.currot	-begin-
Displays the current default
rotation.  Click on this
button to change the current
default rotation.
-end-


ho.tool.zoomin		Zoom in
ho.tool.zoomout		Zoom out
ho.tool.rotate		Rotate selected gate(s) counter-clockwise.
ho.tool.brotate		Rotate selected gate(s) clockwise.
ho.tool.valgn		Align selected gate(s) vertically.
ho.tool.halgn		Align selected gate(s) horizontally.

ho.tool.cut		Cut selection.
ho.tool.copy		Copy selection.
ho.tool.paste		Paste from cut buffer.
ho.tool.find		Find gate, wire or text.

ho.tool.addport		Add a port to the selected gate.
ho.tool.anchor		Anchor the selected gate(s).
ho.tool.unanchor	Unanchor the selected gate(s).
ho.tool.replicate	Replicate a gate.
ho.tool.delete		Delete the selection.
tkgate-data 2.0~b10-4ubuntu2 / usr / share / tkgate / locale / en / messages.old
