/usr/share/doc/proftpd-doc/howto/ConfigFile.html

<!-- $Id: ConfigFile.html,v 1.6 2009-09-04 22:26:49 castaglia Exp $ -->
<!-- $Source: /home/proftpd-core/backup/proftp-cvsroot/proftpd/doc/howto/ConfigFile.html,v $ -->

<html>
<head>
<title>ProFTPD mini-HOWTO - Configuring ProFTPD (via proftpd.conf)</title>
</head>

<body bgcolor=white>

<hr>
<center><h2><b>
Configuring ProFTPD<br>
(via <code>proftpd.conf</code>)
</b></h2></center>
<hr>

<p>
<b>The Configuration File</b><br>
The first step in configuring a <code>proftpd</code> daemon is knowing where
the configuration file, usually named <code>proftpd.conf</code>, is located.
The default location for this file is <code>/etc/proftpd.conf</code> or
<code>/usr/local/etc/proftpd.conf</code>, depending on your installation.
When starting the daemon, the exact path to the configuration file to be
used can always be specified using the <code>-c</code> command-line option.

<p>
The idea behind <code>proftpd</code>'s handling of the configuration file
is that a blank file can be used, and the daemon will still operate.  This
means that, unlike Apache, there is a &quot;default&quot; server configuration
in every <code>proftpd.conf</code>; ProFTPD does not require that all
server configurations be explicitly written in the <code>proftpd.conf</code>
file.  This default server attempts to bind to the IP address of the hostname
indicated by the <code>hostname(1)</code> command.

<p><a name="Format"></a>
<b>Configuration Format</b><br>
The format of the <code>proftpd.conf</code> file is deliberately designed
to resemble the format used by Apache: lines of configuration directives
contained with different contexts.  A list of the configuration directives
for ProFTPD is available here:
<pre>
  <a href="http://www.proftpd.org/docs/">http://www.proftpd.org/docs/</a>
</pre>
When reading the description for the configuration directives, this key
might be useful:
<pre>
  <a href="http://www.castaglia.org/proftpd/doc/contrib/configuration-directive-key.html">http://www.castaglia.org/proftpd/doc/contrib/configuration-directive-key.html</a>
</pre>
It describes the description format, and lists the different contexts in the
configuration file.  The &quot;server config&quot; context is the one in
which most of your configuration directives will most likely be placed.

<p>
Two new configuration directives were introduced in <code>1.2.6rc1</code>:
<code>&lt;IfModule&gt;</code> and <code>&lt;IfDefine&gt;</code>.  These
work exactly like Apache's directives of the same names, providing the ability
to have conditional sections in the configuration file.

<p><a name="Starting"></a>
<b>Starting the Daemon</b><br>
One of the first decisions you will need to make is whether you will be running
your ProFTPD server as an <code>inetd</code> service, or as a
<code>standalone</code> server.  This is controlled in the
<code>proftpd.conf</code> using the <code>ServerType</code> configuration
directive (see the <a href="ServerType.html">ServerType</a> page).

<p><a name="Identity"></a>
<b>Server Identity</b><br>
The daemon must be started with root privileges in order to do things like
binding to port 21 and chrooting FTP sessions.  However, it is not a good
idea to leave a long-lived process running as root.  The <code>User</code>
and <code>Group</code> configuration directives are thus recommended.  These
directives configure the identity to which the daemon will switch, after
accomplishing its startup tasks.  The daemon will switch to the configured
<code>User</code> and <code>Group</code> in the &quot;server config&quot;
context.  (Note that this switch uses the <i>effective</i> UID/GID,
not the <i>real</i> UID/GID.  Some programs, such as <code>top</code>,
will continue to report <code>proftpd</code> as running as <code>root</code>;
this is because the program displays the real UID/GID of processes.
The <code>proftpd</code> daemon retains root privileges for operations
such as chroots and binding to port 20 for active data transfers.
If you wish <code>proftpd</code> to drop all root privileges, use the
<a href="http://www.proftpd.org/docs/directives/linked/config_ref_RootRevoke.html"><code>RootRevoke</code></a> configuration directive.)

<p>
For this reason, it is recommended that a non-privileged identity be
used.  Many sites choose to use user <code>nobody</code>.  Historically,
this role account was used by NFS-related processes; over time, many other
applications default to using user <code>nobody</code>.  This has the
side-effect of adding to the &quot;privileges&quot; held by user
<code>nobody</code>, in terms of files owned and/or accessible by that user.
Instead, I personally recommend that a new role account be created for use
specifically by the daemon, a user <code>ftpd</code>, and perhaps even a
group <code>ftpd</code>.  Many systems that run Apache have a user
<code>www</code> or user <code>apache</code> for use by the <code>httpd</code>
daemon; similarly, a separate user should be created for the
<code>proftpd</code> daemon.

<p>
In the default configuration file that accompanies the proftpd source code,
there appears:
<pre>
  User nobody
  Group nogroup
</pre>
When trying to start the daemon, many users encounter the &quot;no such group
'nogroup'&quot; error message.  There are really no reasonable defaults
for those directives.  The error message is a way of telling you to create the
role accounts mentioned above.

<p>
For every connection, <code>proftpd</code> creates a new process to handle
that client/connection.  Once that client has successfully authenticated,
then that process switches to the identity/privileges (<i>e.g.</i> UID, primary
and supplemental GIDs, <i>etc</i>) of the authenticated user.  Thus all
browsing, uploads, and downloads that clients do happen as the user as which
they are logged in.

<p><a name="Login"></a>
<b>Logging in</b><br>
By default, the <code>proftpd</code> daemon reads the host's
<code>/etc/passwd</code> file for logging in users.  This means that to
add FTP users, you simply need to create new system accounts for those users in
your <code>/etc/passwd</code> file.

<p>
Sometimes, though, sites want &quot;virtual&quot;, FTP-only users.  In order
to support such configurations, the <code>AuthUserFile</code> configuration
directive can be used (see <a href="AuthFiles.html">here</a> for details).

<p>
For the purpose of authenticating users using other means, there are various
authentication modules: <code>mod_sql</code>, <code>mod_ldap</code>,
<code>mod_radius</code>, <i>etc</i>.  Authentication and the login process
is discussed <a href="Authentication.html">here</a> in more detail.

<p>
For setting up anonymous logins, there is the <a href="http://www.proftpd.org/docs/directives/linked/config_ref_Anonymous.html"><code>&lt;Anonymous&gt;</code></a> configuration context.  If there are no <code>&lt;Anonymous&gt;</code>
sections in your <code>proftpd.conf</code>, then no anonymous logins will be
allowed - simple.  As mentioned in the description, the <code>User</code>
directive in an <code>&lt;Anonymous&gt;</code> context determines what username
is treated as an anonymous login.  The main other thing to know about
anonymous logins is that ProFTPD automatically chroots anonymous logins.

<p><a name="Jailing"></a>
For normal, non-anonymous logins, jails/chroots are configured using the
<a href="http://www.proftpd.org/docs/directives/linked/config_ref_DefaultRoot.html"><code>DefaultRoot</code></a> directive.  This is the configuration directive
used to restrict users to their home directories, to keep them from browsing
around the site.  There is a page covering chrooting
<a href="Chroot.html">here</a>.

<p>
If you use <code>&lt;VirtualHost&gt;</code> sections, and it seems that your
server configuration is not being seen by connecting clients, you might
need to check that, if using a DNS name instead of an IP address in your
<code>&lt;VirtualHost&gt;</code> line, that name resolves to an IP address
different from that of the &quot;default&quot; server.  Many people new
to ProFTPD get the impression that since the configuration syntax looks
similar to Apache's, things like name-based virtual hosting will work as well.
Unfortunately, this is not possible.  It is not a limitation in ProFTPD,
but rather in the RFCs that define FTP.  See the
<a href="Vhost.html">virtual server</a> page for more information.

<p>
As a workaround, some sites configure virtual servers to run on non-standard
ports, using the <code>Port</code> configuration directive.  As long as
the clients are aware of the non-standard port, this scheme works well.  One
minor little caveat to keep in mind, when using this approach, is the numbers
used: the RFCs mandate that the daemon, for the purposes of active data
transfers (as opposed to passive) use port <code><i>L</i>-1</code> as the source
port for the data connection, where <code><i>L</i></code> is the port number
at which the client contacted the server.  This means that servers that use the
standard port 21 for FTP will use port 20 as the source port for their active
data transfers.  Passive data transfers do not have this restriction.  The
restriction comes into play when choosing non-standard port numbers for
virtual hosts.  For example, this configuration would cause problems for
clients of the second virtual server that wanted to use active data transfers:
<pre>
  &lt;VirtualHost <i>a.b.c.d</i>&gt;
    Port 2121
    ...
  &lt;/VirtualHost&gt;

  &lt;VirtualHost <i>a.b.c.d</i>&gt;
    Port 2122
    ...
  &lt;/VirtualHost&gt;
</pre>
The second virtual would attempt to use port 2121 as the source port for
an active data transfer, but would be blocked, as the first virtual server
is already using that port for listening.

<p><a name="Access"></a>
<b>Access Restrictions</b><br>
Many sites like to have specific directories for uploads, and other directories
only for downloads; some sites like to allow downloads, but no browsing
of directories or their contents.  For configurations to achieve this,
use combinations of the <code>&lt;Directory&gt;</code> and
<code>&lt;Limit&gt;</code> configuration directives.  There are separate
pages that cover these configuration sections:
<ul>
  <li><a href="Directory.html"><code>&lt;Directory&gt;</code></a>
  <li><a href="Limit.html"><code>&lt;Limit&gt;</code></a>
</ul>

<p><a name="Questions"></a>
<b>Further Questions</b><br>
Hopefully this document answers some of your questions, or at least enough
to get you started.  In addition, you should take a look at some of the
<a href="http://www.proftpd.org/docs/example-conf.html">example configuration files</a>.  Once you are comfortable with the configuration file format, a reading of
all the configuration directives' descriptions is recommended, especially if
you plan on having more complex configurations.  When trying to figure out why
something is not working, make use of server
<a href="Debugging.html">debugging</a> output.

<p>
If you still have questions, the <a href="http://www.proftpd.org/lists.html">
users</a> mailing list is the best place to post them.

<p>
<hr>
Last Updated: <i>$Date: 2009-09-04 22:26:49 $</i><br>
<hr>

</body>
</html>
proftpd-doc 1.3.5a-1build1 / usr / share / doc / proftpd-doc / howto / ConfigFile.html
