postgresql-9.5-mimeo 1.4.1-1 / usr / share / postgresql / 9.5 / extension / mimeo--1.3.5--1.3.6.sql

-- Added the p_lock_wait parameter from the concurrent_lock_check() function to all the refresh functions. This allows a simple method to tell the refresh function that you'd like to try and wait for a current advisory locks on the destination table and then proceed with the refresh when it's available. Previously, if the lock was held, all refresh functions would immediately return with a notice that another session held the lock. Now you can configure a wait time or tell it to wait forever (be extremely careful with the latter) with a single function call.


CREATE TEMP TABLE mimeo_preserve_privs_temp (statement text);

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_dml(text, int, boolean, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_dml'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_inserter(text, integer, boolean, text, text, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_inserter'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_inserter_serial(text, int, boolean, bigint, bigint, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_inserter_serial'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_inserter_time(text, integer, boolean, timestamp, timestamp, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_inserter_time'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_logdel(text, int, boolean, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_logdel'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_snap(text, boolean, boolean, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_snap'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_table(text, boolean, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_table'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_updater(text, integer, boolean, text, text, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_updater'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_updater_serial(text, integer, boolean, bigint, bigint, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_updater_serial'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_updater_time(text, integer, boolean, timestamp, timestamp, boolean, int, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_updater_time'; 

DROP FUNCTION refresh_dml(text, int, boolean, boolean, boolean);
DROP FUNCTION refresh_inserter(text, integer, boolean, text, text, boolean, boolean);
DROP FUNCTION refresh_inserter_serial(text, int, boolean, bigint, bigint, boolean, boolean);
DROP FUNCTION refresh_inserter_time(text, integer, boolean, timestamp, timestamp, boolean, boolean);
DROP FUNCTION refresh_logdel(text, int, boolean, boolean, boolean);
DROP FUNCTION refresh_snap(text, boolean, boolean, boolean, boolean);
DROP FUNCTION refresh_table(text, boolean, boolean, boolean);
DROP FUNCTION refresh_updater(text, integer, boolean, text, text, boolean, boolean);
DROP FUNCTION refresh_updater_serial(text, integer, boolean, bigint, bigint, boolean, boolean);
DROP FUNCTION refresh_updater_time(text, integer, boolean, timestamp, timestamp, boolean, boolean);


/*
 *  Refresh based on DML (Insert, Update, Delete)
 */
CREATE FUNCTION refresh_dml(p_destination text, p_limit int default NULL, p_repull boolean DEFAULT false, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   boolean := false;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_schema_name      text;
v_dest_table            text;
v_dest_table_name       text;
v_exec_status           text;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_insert_sql            text;
v_job_id                int;
v_jobmon_schema         text;
v_job_name              text;
v_jobmon                boolean;
v_limit                 int; 
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int;
v_pk_name_csv           text;
v_pk_name_type_csv      text := '';
v_pk_name               text[];
v_pk_type               text[];
v_pk_where              text := '';
v_q_schema_name     text;
v_q_table_name      text;
v_remote_f_sql          text;
v_remote_q_sql          text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_src_schema_name       text;
v_src_table_name        text;
v_step_id               int;
v_total                 bigint := 0;
v_trigger_delete        text; 
v_trigger_update        text;
v_delete_remote_q     text;
v_with_update           text;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh DML: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_dml_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , control
    , pk_name
    , pk_type
    , filter
    , condition
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_control
    , v_pk_name
    , v_pk_type
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_dml 
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

SELECT schemaname, tablename 
INTO v_dest_schema_name, v_dest_table_name
FROM pg_catalog.pg_tables
WHERE schemaname||'.'||tablename = v_dest_table;

IF v_dest_table_name IS NULL THEN
    RAISE EXCEPTION 'Destination table is missing (%)', v_dest_table;
END IF;

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
    v_step_id := add_step(v_job_id,'Sanity check primary/unique key values');
END IF;

IF v_pk_name IS NULL OR v_pk_type IS NULL THEN
    RAISE EXCEPTION 'Primary key fields in refresh_config_dml must be defined';
END IF;

-- ensure all primary key columns are included in any column filters
IF v_filter IS NOT NULL THEN
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary/unique key for %',v_job_name; 
        END IF;
    END LOOP;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

SELECT array_to_string(p_cols, ',')
    , array_to_string(p_cols_n_types, ',') 
    , p_source_schema_name
    , p_source_table_name
INTO v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, NULL, v_dblink_name, p_debug);

IF v_src_table_name IS NULL THEN
    RAISE EXCEPTION 'Source table missing (%)', v_source_table;
END IF;

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

v_pk_name_csv := '"'||array_to_string(v_pk_name, '","')||'"';
v_pk_counter := 1;
WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
    IF v_pk_counter > 1 THEN
        v_pk_name_type_csv := v_pk_name_type_csv || ', ';
        v_pk_where := v_pk_where ||' AND ';
    END IF;
    v_pk_name_type_csv := v_pk_name_type_csv||'"'||v_pk_name[v_pk_counter]||'" '||v_pk_type[v_pk_counter];
    v_pk_where := v_pk_where || ' a."'||v_pk_name[v_pk_counter]||'" = b."'||v_pk_name[v_pk_counter]||'"';
    v_pk_counter := v_pk_counter + 1;
END LOOP;

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
END IF;

SELECT schemaname, tablename INTO v_q_schema_name, v_q_table_name 
    FROM dblink(v_dblink_name, 'SELECT schemaname, tablename FROM pg_catalog.pg_tables WHERE schemaname ||''.''|| tablename = '||quote_literal(v_control)) t (schemaname text, tablename text);

IF v_q_table_name IS NULL THEN
    RAISE EXCEPTION 'Source queue table missing (%)', v_control;
END IF;

-- update remote entries
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating remote trigger table');
END IF;
v_with_update := format('
        WITH a AS (
            SELECT '||v_pk_name_csv||' FROM %I.%I ORDER BY '||v_pk_name_csv||' LIMIT '||COALESCE(v_limit::text, 'ALL')||')
        UPDATE %I.%I b SET processed = true 
        FROM a 
        WHERE '||v_pk_where
    , v_q_schema_name, v_q_table_name, v_q_schema_name, v_q_table_name);
PERFORM gdb(p_debug, v_with_update);
v_trigger_update := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','|| quote_literal(v_with_update)||')';
PERFORM gdb(p_debug,v_trigger_update);
EXECUTE v_trigger_update INTO v_exec_status;    
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;

IF p_repull THEN
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
    END IF;
    PERFORM gdb(p_debug, 'Request to repull ALL data from source. This could take a while...');

    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Truncating local table');
    END IF;
    PERFORM gdb(p_debug,'Truncating local table');
    EXECUTE format('TRUNCATE %I.%I', v_dest_schema_name, v_dest_table_name);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;
    -- Define cursor query
    v_remote_f_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
ELSE
    EXECUTE 'CREATE TEMP TABLE refresh_dml_queue ('||v_pk_name_type_csv||', PRIMARY KEY ('||v_pk_name_csv||'))';
    -- Copy queue locally for use in removing updated/deleted rows
    v_remote_q_sql := format('SELECT DISTINCT '||v_pk_name_csv||' FROM %I.%I WHERE processed = true', v_q_schema_name, v_q_table_name);
    PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_q_sql);
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Creating local queue temp table');
    END IF;
    v_rowcount := 0;
    LOOP
        v_fetch_sql := 'INSERT INTO refresh_dml_queue ('||v_pk_name_csv||') 
            SELECT '||v_pk_name_csv||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_pk_name_type_csv||')';
        EXECUTE v_fetch_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        EXIT WHEN v_rowcount = 0;
        v_total := v_total + coalesce(v_rowcount, 0);
        PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
        END IF;
    END LOOP;
    PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
    EXECUTE 'CREATE INDEX ON refresh_dml_queue ('||v_pk_name_csv||')';
    ANALYZE refresh_dml_queue;
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
    END IF;
    PERFORM gdb(p_debug,'Temp queue table row count '||v_total::text);

    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Deleting records from local table');
    END IF;
    v_delete_sql := format('DELETE FROM %I.%I a USING refresh_dml_queue b WHERE '||v_pk_where, v_dest_schema_name, v_dest_table_name);
    PERFORM gdb(p_debug,v_delete_sql);
    EXECUTE v_delete_sql; 
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    PERFORM gdb(p_debug,'Rows removed from local table before applying changes: '||v_rowcount::text);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Removed '||v_rowcount||' records');
    END IF;
    -- Define cursor query
    v_remote_f_sql := format('SELECT '||v_cols||' FROM %I.%I JOIN ('||v_remote_q_sql||') x USING ('||v_pk_name_csv||')', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
END IF;

-- insert records to local table. Have to do temp table in case destination table is partitioned (returns 0 when inserting to parent)
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_f_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new records into local table');
END IF;
EXECUTE 'CREATE TEMP TABLE refresh_dml_full ('||v_cols_n_types||')';
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO refresh_dml_full ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM refresh_dml_full', v_dest_schema_name, v_dest_table_name);
    EXECUTE 'TRUNCATE refresh_dml_full';
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
END IF;

IF p_repull = false AND v_total > (v_limit * .75) THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Row count warning');
        PERFORM update_step(v_step_id, 'WARNING','Row count fetched ('||v_total||') greater than 75% of batch limit ('||v_limit||'). Recommend increasing batch limit if possible.');
    END IF;
    v_batch_limit_reached := true;
END IF;

-- clean out rows from remote queue table
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Cleaning out rows from remote queue table');
END IF;
v_trigger_delete := format('SELECT dblink_exec(%L, ''DELETE FROM %I.%I WHERE processed = true'')', v_dblink_name, v_q_schema_name, v_q_table_name);
PERFORM gdb(p_debug,v_trigger_delete);
EXECUTE v_trigger_delete INTO v_exec_status;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;
-- update activity status
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run in config table');
END IF;
UPDATE refresh_config_dml SET last_run = CURRENT_TIMESTAMP WHERE dest_table = v_dest_table; 
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Last run was '||CURRENT_TIMESTAMP);
END IF;
EXECUTE 'DROP TABLE IF EXISTS refresh_dml_full';
EXECUTE 'DROP TABLE IF EXISTS refresh_dml_queue';

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = false THEN
        PERFORM close_job(v_job_id);
    ELSE
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh DML: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||coalesce(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;

END
$$;


/*
 * Parent function for running either time or serial based inserter replication
 */
CREATE FUNCTION refresh_inserter(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start text DEFAULT NULL, p_repull_end text DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE
    v_type      text;
BEGIN

SELECT type INTO v_type FROM @extschema@.refresh_config_inserter WHERE dest_table = p_destination;
IF v_type = 'inserter_time' THEN
    PERFORM @extschema@.refresh_inserter_time(p_destination, p_limit, p_repull, p_repull_start::timestamp, p_repull_end::timestamp, p_jobmon, p_lock_wait, p_debug);
ELSIF v_type = 'inserter_serial' THEN
    PERFORM @extschema@.refresh_inserter_serial(p_destination, p_limit, p_repull, p_repull_start::bigint, p_repull_end::bigint, p_jobmon, p_lock_wait, p_debug);
ELSIF v_type IS NULL THEN
    RAISE EXCEPTION 'No configuration found for refresh_inserter on table %', p_destination;
ELSE
    RAISE EXCEPTION 'Invalid value for control_type column in refresh_config_inserter table: %. Must be "time" or "serial"', v_type;
END IF;

END
$$;


/*
 *  Refresh insert only table based on serial control field
 */
CREATE FUNCTION refresh_inserter_serial(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start bigint DEFAULT NULL, p_repull_end bigint DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0; 
v_boundary              int;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_schema_name      text;
v_dest_table            text;
v_dest_table_name       text;
v_fetch_sql             text;
v_filter                text[]; 
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          bigint;
v_last_value            bigint;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_sql                   text;
v_src_schema_name       text;
v_src_table_name        text;
v_step_id               int;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Inserter: '||p_destination;

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_inserter_refresh_'||p_destination);

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , control
    , last_value
    , boundary
    , filter
    , condition
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_inserter_serial
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;  

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

SELECT schemaname, tablename 
INTO v_dest_schema_name, v_dest_table_name
FROM pg_catalog.pg_tables
WHERE schemaname||'.'||tablename = v_dest_table;

IF v_dest_table_name IS NULL THEN
    RAISE EXCEPTION 'Destination table is missing (%)', v_dest_table;
END IF;

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

SELECT array_to_string(p_cols, ',')
    , array_to_string(p_cols_n_types, ',') 
    , p_source_schema_name
    , p_source_table_name
INTO v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, NULL, v_dblink_name, p_debug);

IF v_src_table_name IS NULL THEN
    RAISE EXCEPTION 'Source table missing (%)', v_source_table;
END IF;

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

-- Unlike incremental time, there's nothing like CURRENT_TIMESTAMP to base the boundary on. So use the current source max to determine it.
-- For some reason this doesn't like using an int with %L (v_boundary) when making up the format command using dblink
v_sql := format('SELECT boundary FROM dblink(%L, ''SELECT max(%I) - '||v_boundary||' AS boundary FROM %I.%I'') AS (boundary bigint)'
                , v_dblink_name 
                , v_control
                , v_src_schema_name
                , v_src_table_name);
PERFORM gdb(p_debug, v_sql);
EXECUTE v_sql INTO v_boundary;

IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE format('TRUNCATE %I.%I', v_dest_schema_name, v_dest_table_name);
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := format(v_remote_sql || '%I < %L', v_control, v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, '0')||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, '0')||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L'
                                        , v_control
                                        , COALESCE(p_repull_start::bigint, 0)
                                        , v_control
                                        , COALESCE(p_repull_end::bigint, v_boundary));
        -- Delete the old local data. Use higher than bigint max upper boundary to ensure all old data is deleted
        v_delete_sql := format('DELETE FROM %I.%I WHERE %I > %L AND %I < %L'
                        , v_dest_schema_name
                        , v_dest_table_name
                        , v_control
                        , COALESCE(p_repull_start::bigint, 0)
                        , v_control
                        , COALESCE(p_repull_end::bigint, 9300000000000000000));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || ' rows removed');
        END IF;
    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L ORDER BY %I ASC LIMIT '||COALESCE(v_limit::text, 'ALL')
                                    , v_control
                                    , v_last_value
                                    , v_control
                                    , v_boundary
                                    , v_control);

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);

END IF;

EXECUTE 'CREATE TEMP TABLE mimeo_refresh_inserter_temp ('||v_cols_n_types||')';
PERFORM gdb(p_debug, 'v_remote_sql: '||COALESCE(v_remote_sql, '<NULL>'));
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new records into local table');
END IF;
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO mimeo_refresh_inserter_temp ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE format('SELECT max(%I) FROM mimeo_refresh_inserter_temp', v_control) INTO v_last_fetched;
    IF v_limit IS NULL THEN -- insert into the real table in batches if no limit to avoid excessively large temp tables
        EXECUTE format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM mimeo_refresh_inserter_temp', v_dest_schema_name, v_dest_table_name);
        TRUNCATE mimeo_refresh_inserter_temp;
    END IF;
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);
END IF;

IF v_limit IS NULL THEN
    -- nothing else to do
ELSE
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');
    END IF;
    PERFORM gdb(p_debug, 'Checking for batch limit issues');
    -- Not recommended that the batch actually equal the limit set if possible. Handle all edge cases to keep data consistent
    IF v_total >= v_limit THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
        END IF;
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        EXECUTE format('SELECT max(%I) FROM mimeo_refresh_inserter_temp', v_control) INTO v_last_value;
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE format('DELETE FROM mimeo_refresh_inserter_temp WHERE %I = %L', v_control, v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached = 2;
        v_total := v_total - v_rowcount;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same serial value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows desired ('||v_limit||') or greater and all contained the same serial value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached = 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        EXECUTE format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM mimeo_refresh_inserter_temp', v_dest_schema_name, v_dest_table_name);
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' records');
        END IF;
        PERFORM gdb(p_debug, 'Inserted '||v_total||' records');
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE format('SELECT max(%I) FROM %I.%I', v_control, v_dest_schema_name, v_dest_table_name) INTO v_last_value;
    UPDATE refresh_config_inserter_serial SET last_value = coalesce(v_last_value, 0), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '|| coalesce(v_last_value, 0));
        PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, 0));
    END IF;
END IF;

DROP TABLE IF EXISTS mimeo_refresh_inserter_temp;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Inserter: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
                  EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
END
$$;


/*
 *  Refresh insert only table based on timestamp control field
 */
CREATE FUNCTION refresh_inserter_time(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start timestamp DEFAULT NULL, p_repull_end timestamp DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0; 
v_boundary              timestamptz;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_schema_name      text;
v_dest_table            text;
v_dest_table_name       text;
v_dst_active            boolean;
v_dst_check             boolean;
v_dst_start             int;
v_dst_end               int;
v_fetch_sql             text;
v_filter                text[]; 
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          timestamptz;
v_last_value            timestamptz;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_src_schema_name       text;
v_src_table_name        text;
v_step_id               int;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Inserter: '||p_destination;

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_inserter_refresh_'||p_destination);

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , control
    , last_value
    , now() - boundary::interval
    , filter
    , condition
    , dst_active
    , dst_start
    , dst_end
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_filter
    , v_condition
    , v_dst_active
    , v_dst_start
    , v_dst_end
    , v_limit
    , v_jobmon
FROM refresh_config_inserter_time
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;  

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

SELECT schemaname, tablename 
INTO v_dest_schema_name, v_dest_table_name
FROM pg_catalog.pg_tables
WHERE schemaname||'.'||tablename = v_dest_table;

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

-- Do not allow this function to run during DST time change if config option is true. Otherwise will miss data from source
IF v_dst_active THEN
    v_dst_check := @extschema@.dst_change(CURRENT_TIMESTAMP);
    IF v_dst_check THEN 
        IF to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') > v_dst_start AND to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') < v_dst_end THEN
            IF v_jobmon THEN
                v_step_id := add_step( v_job_id, 'DST Check');
                PERFORM update_step(v_step_id, 'OK', 'Job CANCELLED - Does not run during DST time change');
                PERFORM close_job(v_job_id);
            END IF;
            PERFORM gdb(p_debug, 'Cannot run during DST time change');
            UPDATE refresh_config_inserter SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
            EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
            RETURN;
        END IF;
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

SELECT array_to_string(p_cols, ',')
    , array_to_string(p_cols_n_types, ',') 
    , p_source_schema_name
    , p_source_table_name
INTO v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, NULL, v_dblink_name, p_debug);

IF v_src_table_name IS NULL THEN
    RAISE EXCEPTION 'Source table missing (%)', v_source_table;
END IF;

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE format('TRUNCATE %I.%I', v_dest_schema_name, v_dest_table_name);
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := v_remote_sql ||format('%I < %L', v_control, v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L'
                                                , v_control
                                                , COALESCE(p_repull_start, '-infinity')
                                                , v_control
                                                , COALESCE(p_repull_end, v_boundary));
        -- Delete the old local data. Use higher than upper boundary to ensure all old data is deleted
        v_delete_sql := format('DELETE FROM %I.%I WHERE %I > %L AND %I < %L'
                                , v_dest_schema_name
                                , v_dest_table_name
                                , v_control
                                , COALESCE(p_repull_start, '-infinity')
                                , v_control
                                , COALESCE(p_repull_end, 'infinity'));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || 'rows removed');
        END IF;
    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L ORDER BY %I ASC LIMIT '||COALESCE(v_limit::text, 'ALL')
                                            , v_control
                                            , v_last_value
                                            , v_control
                                            , v_boundary
                                            , v_control);

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);

END IF;

EXECUTE 'CREATE TEMP TABLE mimeo_refresh_inserter_temp ('||v_cols_n_types||')';
PERFORM gdb(p_debug,v_remote_sql);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new records into local table');
END IF;
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO mimeo_refresh_inserter_temp ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE 'SELECT max('||quote_ident(v_control)||') FROM mimeo_refresh_inserter_temp' INTO v_last_fetched;
    IF v_limit IS NULL THEN -- insert into the real table in batches if no limit to avoid excessively large temp tables
        EXECUTE format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM mimeo_refresh_inserter_temp', v_dest_schema_name, v_dest_table_name);
        TRUNCATE mimeo_refresh_inserter_temp;
    END IF;
    EXIT WHEN v_rowcount = 0;        
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);
END IF;

IF v_limit IS NULL THEN
    -- nothing else to do
ELSE
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');
    END IF;
    PERFORM gdb(p_debug, 'Checking for batch limit issues');
    -- Not recommended that the batch actually equal the limit set if possible. Handle all edge cases to keep data consistent
    IF v_total >= v_limit THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
        END IF;
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        EXECUTE 'SELECT max('||quote_ident(v_control)||') FROM mimeo_refresh_inserter_temp' INTO v_last_value;
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE format('DELETE FROM mimeo_refresh_inserter_temp WHERE %I = %L', v_control, v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached = 2;
        v_total := v_total - v_rowcount;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows desired ('||v_limit||') or greaer and all contained the same timestamp value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached = 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        EXECUTE format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM mimeo_refresh_inserter_temp', v_dest_schema_name, v_dest_table_name);
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' records');
        END IF;
        PERFORM gdb(p_debug, 'Inserted '||v_total||' records');
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE format('SELECT max(%I) FROM %I.%I', v_control, v_dest_schema_name, v_dest_table_name) INTO v_last_value;
    UPDATE refresh_config_inserter_time SET last_value = coalesce(v_last_value, CURRENT_TIMESTAMP), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '|| coalesce(v_last_value, CURRENT_TIMESTAMP));
        PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, CURRENT_TIMESTAMP));
    END IF;
END IF;

DROP TABLE IF EXISTS mimeo_refresh_inserter_temp;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Inserter: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
                  EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
END
$$;


/*
 *  Refresh based on DML (Insert, Update, Delete), but logs all deletes on the destination table
 *  Destination table requires extra column: mimeo_source_deleted timestamptz
 */
CREATE FUNCTION refresh_logdel(p_destination text, p_limit int DEFAULT NULL, p_repull boolean DEFAULT false, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   boolean := false;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_d_sql          text;
v_delete_f_sql          text;
v_delete_remote_q       text;
v_dest_schema_name      text;
v_dest_table            text;
v_dest_table_name       text;
v_exec_status           text;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_insert_deleted_sql    text;
v_insert_sql            text;
v_job_id                int;
v_jobmon_schema         text;
v_jobmon                boolean;
v_job_name              text;
v_limit                 int; 
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int;
v_pk_name               text[];
v_pk_name_csv           text;
v_pk_name_type_csv      text := '';
v_pk_type               text[];
v_pk_where              text := '';
v_q_schema_name         text;
v_q_table_name          text;
v_remote_d_sql          text;
v_remote_f_sql          text;
v_remote_q_sql          text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_src_schema_name       text;
v_src_table_name        text;
v_step_id               int;
v_total                 bigint := 0;
v_trigger_delete        text; 
v_trigger_update        text;
v_with_update           text;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Log Del: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_logdel_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , control
    , pk_name
    , pk_type
    , filter
    , condition
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_control
    , v_pk_name
    , v_pk_type
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_logdel 
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

SELECT schemaname, tablename 
INTO v_dest_schema_name, v_dest_table_name
FROM pg_catalog.pg_tables
WHERE schemaname||'.'||tablename = v_dest_table;

IF v_dest_table_name IS NULL THEN
    RAISE EXCEPTION 'Destination table is missing (%)', v_dest_table;
END IF;

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
    v_step_id := add_step(v_job_id,'Sanity check primary/unique key values');
END IF;

IF v_pk_name IS NULL OR v_pk_type IS NULL THEN
    RAISE EXCEPTION 'Primary key fields in refresh_config_logdel must be defined';
END IF;

-- ensure all primary key columns are included in any column filters
IF v_filter IS NOT NULL THEN
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary/unique key for %',v_job_name; 
        END IF;
    END LOOP;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

SELECT array_to_string(p_cols, ',')
    , array_to_string(p_cols_n_types, ',') 
    , p_source_schema_name
    , p_source_table_name
INTO v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, NULL, v_dblink_name, p_debug);

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

v_pk_name_csv := '"'||array_to_string(v_pk_name,'","')||'"';
v_pk_counter := 1;
WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
    IF v_pk_counter > 1 THEN
        v_pk_name_type_csv := v_pk_name_type_csv || ', ';
        v_pk_where := v_pk_where ||' AND ';
    END IF;
    v_pk_name_type_csv := v_pk_name_type_csv ||'"'||v_pk_name[v_pk_counter]||'" '||v_pk_type[v_pk_counter];
    v_pk_where := v_pk_where || ' a."'||v_pk_name[v_pk_counter]||'" = b."'||v_pk_name[v_pk_counter]||'"';
    v_pk_counter := v_pk_counter + 1;
END LOOP;

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
END IF;

SELECT schemaname, tablename INTO v_src_schema_name, v_src_table_name 
    FROM dblink(v_dblink_name, 'SELECT schemaname, tablename FROM pg_catalog.pg_tables WHERE schemaname ||''.''|| tablename = '||quote_literal(v_source_table)) t (schemaname text, tablename text);

IF v_src_table_name IS NULL THEN
    RAISE EXCEPTION 'Source table missing (%)', v_source_table;
END IF;

SELECT schemaname, tablename INTO v_q_schema_name, v_q_table_name 
    FROM dblink(v_dblink_name, 'SELECT schemaname, tablename FROM pg_catalog.pg_tables WHERE schemaname ||''.''|| tablename = '||quote_literal(v_control)) t (schemaname text, tablename text);

IF v_q_table_name IS NULL THEN
    RAISE EXCEPTION 'Source queue table missing (%)', v_control;
END IF;

-- update remote entries
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating remote trigger table');
END IF;
v_with_update := format('
        WITH a AS (
            SELECT '||v_pk_name_csv||' FROM %I.%I ORDER BY '||v_pk_name_csv||' LIMIT '||COALESCE(v_limit::text, 'ALL')||')
        UPDATE %I.%I b SET processed = true 
        FROM a 
        WHERE '||v_pk_where
    , v_q_schema_name, v_q_table_name, v_q_schema_name, v_q_table_name);
v_trigger_update := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','|| quote_literal(v_with_update)||')';
PERFORM gdb(p_debug,v_trigger_update);
EXECUTE v_trigger_update INTO v_exec_status;    
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;

-- create temp table for recording deleted rows
EXECUTE 'CREATE TEMP TABLE refresh_logdel_deleted ('||v_cols_n_types||', mimeo_source_deleted timestamptz)';
v_remote_d_sql := format('SELECT '||v_cols||', mimeo_source_deleted FROM %I.%I WHERE processed = true and mimeo_source_deleted IS NOT NULL', v_q_schema_name, v_q_table_name);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_d_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Creating local queue temp table for deleted rows on source');
END IF;
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO refresh_logdel_deleted ('||v_cols||', mimeo_source_deleted) 
        SELECT '||v_cols||', mimeo_source_deleted 
        FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||', mimeo_source_deleted timestamptz)';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    EXIT WHEN v_rowcount = 0;
    v_total := v_total + coalesce(v_rowcount, 0);
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
EXECUTE 'CREATE INDEX ON refresh_logdel_deleted ('||v_pk_name_csv||')';
ANALYZE refresh_logdel_deleted;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
END IF;
PERFORM gdb(p_debug,'Temp deleted queue table row count '||v_total::text);  

IF p_repull THEN
    -- Do delete instead of truncate to avoid missing deleted rows that may have been inserted after the above queue fetch.
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
    END IF;
    PERFORM gdb(p_debug, 'Request to repull ALL data from source. This could take a while...');
    v_delete_remote_q := format('SELECT dblink_exec(%L, ''DELETE FROM %I.%I WHERE processed = true'')', v_dblink_name, v_q_schema_name, v_q_table_name);
    PERFORM gdb(p_debug, v_delete_remote_q);
    EXECUTE v_delete_remote_q;

    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Removing local, undeleted rows');
    END IF;
    PERFORM gdb(p_debug,'Removing local, undeleted rows');
    EXECUTE format('DELETE FROM %I.%I WHERE mimeo_source_deleted IS NULL', v_dest_schema_name, v_dest_table_name);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;

    -- Define cursor query
    v_remote_f_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
ELSE
    -- Do normal stuff here
    EXECUTE 'CREATE TEMP TABLE refresh_logdel_queue ('||v_pk_name_type_csv||')';
    v_remote_q_sql := format('SELECT DISTINCT '||v_pk_name_csv||' FROM %I.%I WHERE processed = true and mimeo_source_deleted IS NULL', v_q_schema_name, v_q_table_name);
    PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_q_sql);
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Creating local queue temp table for inserts/updates');
    END IF;
    v_rowcount := 0;
    LOOP
        v_fetch_sql := 'INSERT INTO refresh_logdel_queue ('||v_pk_name_csv||') 
            SELECT '||v_pk_name_csv||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_pk_name_type_csv||')';
        EXECUTE v_fetch_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        EXIT WHEN v_rowcount = 0;
        v_total := v_total + coalesce(v_rowcount, 0);
        PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
        END IF;
    END LOOP;
    PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
    EXECUTE 'CREATE INDEX ON refresh_logdel_queue ('||v_pk_name_csv||')';
    ANALYZE refresh_logdel_queue;
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
    END IF;
    PERFORM gdb(p_debug,'Temp inserts/updates queue table row count '||v_total::text);

    -- remove records from local table (inserts/updates)
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Removing insert/update records from local table');
    END IF;
    v_delete_f_sql := format('DELETE FROM %I.%I a USING refresh_logdel_queue b WHERE '|| v_pk_where, v_dest_schema_name, v_dest_table_name);
    PERFORM gdb(p_debug,v_delete_f_sql);
    EXECUTE v_delete_f_sql; 
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    PERFORM gdb(p_debug,'Insert/Update rows removed from local table before applying changes: '||v_rowcount::text);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Removed '||v_rowcount||' records');
    END IF;

    -- remove records from local table (deleted rows)
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Removing deleted records from local table');
    END IF;
    v_delete_d_sql := format('DELETE FROM %I.%I a USING refresh_logdel_deleted b WHERE '|| v_pk_where, v_dest_schema_name, v_dest_table_name);
    PERFORM gdb(p_debug,v_delete_d_sql);
    EXECUTE v_delete_d_sql; 
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    PERFORM gdb(p_debug,'Deleted rows removed from local table before applying changes: '||v_rowcount::text);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Removed '||v_rowcount||' records');
    END IF;

    -- Remote full query for normal replication 
    v_remote_f_sql := format('SELECT '||v_cols||' FROM %I.%I JOIN ('||v_remote_q_sql||') x USING ('||v_pk_name_csv||')', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
END IF;

-- insert records to local table (inserts/updates). Have to do temp table in case destination table is partitioned (returns 0 when inserting to parent)
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_f_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new/updated records into local table');
END IF;
EXECUTE 'CREATE TEMP TABLE refresh_logdel_full ('||v_cols_n_types||')'; 
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO refresh_logdel_full ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM refresh_logdel_full', v_dest_schema_name, v_dest_table_name);
    TRUNCATE refresh_logdel_full;
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','New/updated rows inserted: '||v_total);
END IF;

-- insert records to local table (deleted rows to be kept)
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Inserting deleted records into local table');
END IF;
v_insert_deleted_sql := format('INSERT INTO %I.%I ('||v_cols||', mimeo_source_deleted) 
                                SELECT '||v_cols||', mimeo_source_deleted FROM refresh_logdel_deleted', v_dest_schema_name, v_dest_table_name); 
PERFORM gdb(p_debug,v_insert_deleted_sql);
EXECUTE v_insert_deleted_sql;
GET DIAGNOSTICS v_rowcount = ROW_COUNT;
PERFORM gdb(p_debug,'Deleted rows inserted: '||v_rowcount::text);
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Inserted '||v_rowcount||' records');
END IF;
IF (v_total + v_rowcount) > (v_limit * .75) THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Row count warning');
        PERFORM update_step(v_step_id, 'WARNING','Row count fetched ('||v_total||') greater than 75% of batch limit ('||v_limit||'). Recommend increasing batch limit if possible.');
    END IF;
    v_batch_limit_reached := true;
END IF;

-- clean out rows from remote queue table
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Cleaning out rows from remote queue table');
END IF;
v_trigger_delete := format('SELECT dblink_exec(%L,''DELETE FROM %I.%I WHERE processed = true'')', v_dblink_name, v_q_schema_name, v_q_table_name); 
PERFORM gdb(p_debug,v_trigger_delete);
EXECUTE v_trigger_delete INTO v_exec_status;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;

-- update activity status
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run in config table');
END IF;
UPDATE refresh_config_logdel SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination; 
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Last Value was '||current_timestamp);
END IF;

PERFORM dblink_disconnect(v_dblink_name);

DROP TABLE IF EXISTS refresh_logdel_full;
DROP TABLE IF EXISTS refresh_logdel_queue;
DROP TABLE IF EXISTS refresh_logdel_deleted;

IF v_jobmon THEN
    IF v_batch_limit_reached = false THEN
        PERFORM close_job(v_job_id);
    ELSE
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    END IF;
END IF;
-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Log Del: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
                  EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||coalesce(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;


/*
 *  Snap refresh to repull all table data
 */
CREATE FUNCTION refresh_snap(p_destination text, p_index boolean DEFAULT true, p_pulldata boolean DEFAULT true, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock          boolean; 
v_cols_n_types      text[];
v_cols              text;
v_condition         text;
v_create_sql        text;
v_dblink            int;
v_dblink_name       text;
v_dblink_schema     text;
v_dest_schema_name  text;
v_dest_table        text;
v_dest_table_name   text;
v_exists            int;
v_fetch_sql         text;
v_filter            text[];
v_insert_sql        text;
v_job_id            int;
v_jobmon            boolean;
v_jobmon_schema     text;
v_job_name          text;
v_lcols_array       text[];
v_link_exists       boolean;
v_local_sql         text;
v_l                 text;
v_match             boolean = true;
v_old_grant         record;
v_old_owner         text;
v_old_search_path   text;
v_old_snap          text;
v_old_snap_table    text;
v_parts             record;
v_post_script       text[];
v_refresh_snap      text;
v_remote_index_sql  text;
v_remote_sql        text;
v_row               record;
v_rowcount          bigint;
v_r                 text;
v_snap              text;
v_source_table      text;
v_src_schema_name   text;
v_src_table_name    text;
v_step_id           int;
v_table_exists      boolean;
v_total             bigint := 0;
v_tup_del           bigint;
v_tup_ins           bigint;
v_tup_upd           bigint;
v_tup_del_new       bigint;
v_tup_ins_new       bigint;
v_tup_upd_new       bigint;
v_view_definition   text;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'notice', true );
END IF;

v_job_name := 'Refresh Snap: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_snap_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , filter
    , condition
    , n_tup_ins
    , n_tup_upd
    , n_tup_del
    , post_script 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_filter
    , v_condition
    , v_tup_ins
    , v_tup_upd
    , v_tup_del
    , v_post_script 
    , v_jobmon
FROM refresh_config_snap
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;  

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping and causing possible deadlock
v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
    v_step_id := add_step(v_job_id,'Grabbing Mapping, Building SQL');
END IF;

-- checking for current view
SELECT definition
INTO v_view_definition
FROM pg_views
WHERE schemaname ||'.'|| viewname = v_dest_table;

PERFORM dblink_connect(v_dblink_name, @extschema@.auth(v_dblink));

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
    v_step_id := add_step(v_job_id,'Truncate non-active snap table');
END IF;

v_exists := strpos(v_view_definition, 'snap1');
  IF v_exists > 0 THEN
    v_snap := 'snap2';
    v_old_snap := 'snap1';
    ELSE
    v_snap := 'snap1';
    v_old_snap := 'snap2';
 END IF;
v_refresh_snap := v_dest_table||'_'||v_snap;
v_old_snap_table := v_dest_table||'_'||v_old_snap;
PERFORM gdb(p_debug,'v_refresh_snap: '||v_refresh_snap::text);

-- Split schemas and table names into their own variables
v_dest_schema_name := split_part(v_dest_table, '.', 1); 
v_dest_table_name := split_part(v_dest_table, '.', 2); 
v_refresh_snap := split_part(v_refresh_snap, '.', 2);
v_old_snap_table := split_part(v_old_snap_table, '.', 2);

-- Create snap table if it doesn't exist
PERFORM gdb(p_debug, 'Getting table columns and creating destination table if it doesn''t exist');
-- v_cols is never used as an array in this function. v_cols_n_types is used as both.
SELECT p_table_exists
    , array_to_string(p_cols, ',')
    , p_cols_n_types
    , p_source_schema_name
    , p_source_table_name
INTO v_table_exists
    , v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, v_snap, v_dblink_name, p_debug);

IF v_table_exists THEN 
/* Check local column definitions against remote and recreate table if different. 
Allows automatic recreation of snap tables if columns change (add, drop type change)  */  
    v_local_sql := 'SELECT array_agg(''"''||a.attname||''"''||'' ''||format_type(a.atttypid, a.atttypmod)::text) as cols_n_types 
                    FROM pg_catalog.pg_attribute a
                    JOIN pg_catalog.pg_class c ON a.attrelid = c.oid
                    JOIN pg_catalog.pg_namespace n ON c.relnamespace = n.oid
                    WHERE n.nspname = '||quote_literal(v_dest_schema_name)||'
                    AND c.relname = '||quote_literal(v_refresh_snap)||'
                    AND a.attnum > 0 
                    AND a.attisdropped is false';
    PERFORM gdb(p_debug, v_local_sql);

    EXECUTE v_local_sql INTO v_lcols_array;
    -- Check to see if there's a change in the column structure on the remote
    FOREACH v_r IN ARRAY v_cols_n_types LOOP
        v_match := false;
        FOREACH v_l IN ARRAY v_lcols_array LOOP
            IF v_r = v_l THEN
                v_match := true;
                EXIT;
            END IF;
        END LOOP;
    END LOOP;

    IF v_match = false THEN
        CREATE TEMP TABLE mimeo_snapshot_grants_tmp (statement text);
        -- Grab old table privileges. They are applied later after the view is recreated/swapped
        FOR v_old_grant IN 
            SELECT table_schema ||'.'|| table_name AS tablename
                , array_agg(privilege_type::text) AS types
                , grantee
            FROM information_schema.table_privileges 
            WHERE table_schema = v_dest_schema_name
            AND table_name = v_refresh_snap
            GROUP BY grantee, table_schema, table_name 
        LOOP
            INSERT INTO mimeo_snapshot_grants_tmp VALUES ( 
                format('GRANT '||array_to_string(v_old_grant.types, ',')||' ON %I.%I TO %I', v_dest_schema_name, v_refresh_snap, v_old_grant.grantee)
            );
        END LOOP;
        -- Grab old view privileges. They are applied later after the view is recreated/swapped
        FOR v_old_grant IN 
            SELECT table_schema ||'.'|| table_name AS tablename
                , array_agg(privilege_type::text) AS types
                , grantee
            FROM information_schema.table_privileges 
            WHERE table_schema = v_dest_schema_name
            AND table_name = v_dest_table_name
            GROUP BY grantee, table_schema, table_name 
        LOOP
            INSERT INTO mimeo_snapshot_grants_tmp VALUES ( 
                format('GRANT '||array_to_string(v_old_grant.types, ',')||' ON %I.%I TO %I', v_dest_schema_name, v_dest_table_name, v_old_grant.grantee)
            );
        END LOOP;
        SELECT viewowner INTO v_old_owner FROM pg_views WHERE schemaname ||'.'|| viewname = v_dest_table;

        EXECUTE format('DROP TABLE %I.%I', v_dest_schema_name, v_refresh_snap);
        EXECUTE format('DROP VIEW %I.%I', v_dest_schema_name, v_dest_table_name);
        PERFORM manage_dest_table(v_dest_table, v_snap, v_dblink_name, p_debug);

        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Source table structure changed.');
            PERFORM update_step(v_step_id, 'OK','Tables and view dropped and recreated. Please double-check snap table attributes (permissions, indexes, etc');
        END IF;
        PERFORM gdb(p_debug,'Source table structure changed. Tables and view dropped and recreated. Please double-check snap table attributes (permissions, indexes, etc)');
    END IF;
    -- truncate non-active snap table
    EXECUTE format('TRUNCATE TABLE %I.%I', v_dest_schema_name, v_refresh_snap);

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;
END IF;

-- Only check the remote data if there have been no column changes and snap table actually exists. 
-- Otherwise maker functions won't work if source is empty & view switch won't happen properly.
IF  v_table_exists AND v_match THEN
    v_remote_sql := format('SELECT n_tup_ins, n_tup_upd, n_tup_del 
                    FROM pg_catalog.pg_stat_all_tables 
                    WHERE schemaname = %L
                    AND relname = %L',
                    v_src_schema_name, v_src_table_name);
    v_remote_sql := 'SELECT n_tup_ins, n_tup_upd, n_tup_del 
                    FROM dblink('||quote_literal(v_dblink_name)||', ' || quote_literal(v_remote_sql) || ') AS
                    t (n_tup_ins bigint, n_tup_upd bigint, n_tup_del bigint)';
    PERFORM gdb(p_debug,'v_remote_sql: '||v_remote_sql);
    EXECUTE v_remote_sql INTO v_tup_ins_new, v_tup_upd_new, v_tup_del_new;
    IF v_tup_ins_new = v_tup_ins AND v_tup_upd_new = v_tup_upd AND v_tup_del_new = v_tup_del THEN
        PERFORM gdb(p_debug,'Remote table has not had any writes. Skipping data pull');
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Remote table has not had any writes. Skipping data pull');
        END IF;
        UPDATE refresh_config_snap SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;
        PERFORM dblink_disconnect(v_dblink_name);
        IF v_jobmon THEN
            PERFORM close_job(v_job_id);
        END IF;
        EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
        RETURN;
    END IF;
END IF;

v_remote_sql := format('SELECT '|| v_cols ||' FROM %I.%I', v_src_schema_name, v_src_table_name);
-- Used by p_pulldata parameter in maker function
IF p_pulldata = false THEN
    v_remote_sql := v_remote_sql || ' LIMIT 0';
ELSIF v_condition IS NOT NULL THEN
    v_remote_sql := v_remote_sql || ' ' || v_condition;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Inserting records into local table');
END IF;
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);

v_rowcount := 0;
LOOP
    v_fetch_sql := format('INSERT INTO %I.%I ('|| v_cols ||')', v_dest_schema_name, v_refresh_snap);
    v_fetch_sql := v_fetch_sql || 'SELECT '|| v_cols ||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||array_to_string(v_cols_n_types, ',')||')';
    PERFORM gdb(p_debug, 'v_fetch_sql: '||v_fetch_sql);
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    EXIT WHEN v_rowcount = 0;
    v_total := v_total + coalesce(v_rowcount, 0);
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' rows');
END IF;

-- Create indexes if new table was created
IF (v_table_exists = false OR v_match = 'f') AND p_index = true THEN
    PERFORM gdb(p_debug, 'Creating indexes');
    PERFORM create_index(v_dest_table, v_src_schema_name, v_src_table_name, v_snap, p_debug);
END IF;

EXECUTE format('ANALYZE %I.%I', v_dest_schema_name, v_refresh_snap);

-- swap view
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Swap view to '||v_refresh_snap);
END IF;
PERFORM gdb(p_debug,'Swapping view to '||v_refresh_snap);
EXECUTE format('CREATE OR REPLACE VIEW %I.%I AS SELECT * FROM %I.%I', v_dest_schema_name, v_dest_table_name, v_dest_schema_name, v_refresh_snap);
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','View Swapped');
END IF;

IF v_match = false THEN
    -- Actually apply the original privileges if the table was recreated
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Applying original privileges to recreated snap table');
    END IF;
    FOR v_old_grant IN SELECT statement FROM mimeo_snapshot_grants_tmp
    LOOP
        PERFORM gdb(p_debug, 'v_old_grant.statement: '|| v_old_grant.statement);
        EXECUTE v_old_grant.statement;
    END LOOP;
    DROP TABLE IF EXISTS mimeo_snapshot_grants_tmp;
    EXECUTE format('ALTER VIEW %I.%I OWNER TO %I', v_dest_schema_name, v_dest_table_name, v_old_owner);
    EXECUTE format('ALTER TABLE %I.%I OWNER TO %I', v_dest_schema_name, v_refresh_snap, v_old_owner);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;

    -- Run any special sql to fix anything that was done to destination tables (extra indexes, etc)
    IF v_post_script IS NOT NULL THEN
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Applying post_script sql commands due to schema change');
        END IF;
        PERFORM @extschema@.post_script(v_dest_table);
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Done');
        END IF;
    END IF;
END IF;

SELECT
    CASE
        WHEN count(1) > 0 THEN true
        ELSE false 
    END
INTO v_table_exists 
FROM pg_catalog.pg_tables 
WHERE schemaname = v_dest_schema_name
AND tablename = v_old_snap_table;

IF v_table_exists THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Truncating old snap table');
    END IF;
    EXECUTE format('TRUNCATE TABLE %I.%I', v_dest_schema_name, v_old_snap_table);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run & tuple change values');
END IF;
UPDATE refresh_config_snap SET
    last_run = CURRENT_TIMESTAMP
    , n_tup_ins = v_tup_ins_new
    , n_tup_upd = v_tup_upd_new
    , n_tup_del = v_tup_del_new
WHERE dest_table = p_destination;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
END IF;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    PERFORM close_job(v_job_id);
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;   
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Snap: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;


/*
 *  Plain table refresh function. 
 */
CREATE FUNCTION refresh_table(p_destination text, p_truncate_cascade boolean DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql
    AS $$
DECLARE

v_adv_lock              boolean;
v_cols                  text;
v_cols_n_types          text;
v_condition             text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_dest_schema_name      text;
v_dest_table            text;
v_dest_table_name       text;
v_fetch_sql             text;
v_filter                text[];
v_job_id                bigint;
v_job_name              text;
v_jobmon                boolean;
v_jobmon_schema         text;
v_link_exists           boolean;
v_old_search_path       text;
v_post_script           text[];
v_remote_sql            text;
v_rowcount              bigint := 0;
v_seq                   text;
v_seq_max               bigint;
v_sequences             text[];
v_source_table          text;
v_seq_name              text;
v_seq_oid               oid;
v_seq_reset             text;
v_seq_schema            text;
v_src_schema_name       text;
v_src_table_name        text;
v_step_id               bigint;
v_total                 bigint := 0;
v_truncate_cascade      boolean;
v_truncate_sql          text;

BEGIN

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_table_refresh_'||p_destination);
v_job_name := 'Refresh Table: '||p_destination;

SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , filter
    , condition
    , sequences
    , truncate_cascade
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_filter
    , v_condition
    , v_sequences
    , v_truncate_cascade
    , v_jobmon
FROM refresh_config_table
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for Refresh Table: %',p_destination; 
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

SELECT schemaname, tablename 
INTO v_dest_schema_name, v_dest_table_name
FROM pg_catalog.pg_tables
WHERE schemaname||'.'||tablename = v_dest_table;

IF p_truncate_cascade IS NOT NULL THEN
    v_truncate_cascade := p_truncate_cascade;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Truncating destination table');
END IF;
v_truncate_sql := format('TRUNCATE TABLE %I.%I', v_dest_schema_name, v_dest_table_name);
IF v_truncate_cascade THEN
    v_truncate_sql := v_truncate_sql || ' CASCADE';
    RAISE NOTICE 'WARNING! If this table had foreign keys, you have just truncated all referencing tables as well!';
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK', 'If this table had foreign keys, you have just truncated all referencing tables as well!');
    END IF;
ELSE
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK', 'Done');
    END IF;
END IF;
EXECUTE v_truncate_sql;

PERFORM dblink_connect(v_dblink_name, @extschema@.auth(v_dblink));

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Grabbing Mapping, Building SQL');
END IF;

SELECT array_to_string(p_cols, ',')
    , array_to_string(p_cols_n_types, ',') 
    , p_source_schema_name
    , p_source_table_name
INTO v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, NULL, v_dblink_name, p_debug);

IF v_src_table_name IS NULL THEN
    RAISE EXCEPTION 'Source table missing (%)', v_source_table;
END IF;

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK', 'Done');
    v_step_id := add_step(v_job_id,'Inserting records into local table');
END IF;

v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
IF v_condition IS NOT NULL THEN
    v_remote_sql := v_remote_sql || ' ' || v_condition;
END IF;
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
v_rowcount := 0;
LOOP
    v_fetch_sql := format('INSERT INTO %I.%I ('||v_cols||')', v_dest_schema_name, v_dest_table_name)|| 
        'SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    EXIT WHEN v_rowcount = 0;
    v_total := v_total + coalesce(v_rowcount, 0);
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' rows');
END IF;

PERFORM dblink_disconnect(v_dblink_name);

-- Reset any sequences given in the parameter to their new value. 
-- Checks all tables that use the given sequence to ensure it's the max for the entire database.
IF v_sequences IS NOT NULL THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Resetting sequences');
    END IF;
    FOREACH v_seq IN ARRAY v_sequences LOOP
        SELECT n.nspname, c.relname, c.oid 
        INTO v_seq_schema, v_seq_name, v_seq_oid
        FROM pg_catalog.pg_class c
        JOIN pg_catalog.pg_namespace n ON c.relnamespace = n.oid
        WHERE n.nspname ||'.'|| c.relname = v_seq;

        IF v_seq_oid IS NOT NULL THEN
            v_seq_max := sequence_max_value(v_seq_oid);
        END IF;

        IF v_seq_max IS NOT NULL THEN
            v_seq_reset := format('SELECT setval(''%I.%I'', %L)', v_seq_schema, v_seq_name, v_seq_max);
            PERFORM gdb(p_debug, 'v_reset_seq: '||v_seq_reset);
            EXECUTE v_seq_reset;
        END IF;
    END LOOP;
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK', 'Done');
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run in config table');
END IF;
UPDATE refresh_config_table set last_run = CURRENT_TIMESTAMP WHERE dest_table = v_dest_table;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Last run was '||CURRENT_TIMESTAMP);
END IF;

IF v_jobmon THEN
    PERFORM close_job(v_job_id);
END IF;

EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Table: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||coalesce(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;


/*
 *  Refresh insert/update only table based on timestamp control field
 */
CREATE FUNCTION refresh_updater(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start text DEFAULT NULL, p_repull_end text DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE
    v_type      text;
BEGIN

SELECT type INTO v_type FROM @extschema@.refresh_config_updater WHERE dest_table = p_destination;
IF v_type = 'updater_time' THEN
    PERFORM @extschema@.refresh_updater_time(p_destination, p_limit, p_repull, p_repull_start::timestamp, p_repull_end::timestamp, p_jobmon, p_lock_wait, p_debug);
ELSIF v_type = 'updater_serial' THEN
    PERFORM @extschema@.refresh_updater_serial(p_destination, p_limit, p_repull, p_repull_start::bigint, p_repull_end::bigint, p_jobmon, p_lock_wait, p_debug);
ELSIF v_type IS NULL THEN
    RAISE EXCEPTION 'No configuration found for refresh_updater on table %', p_destination;
ELSE
    RAISE EXCEPTION 'Invalid value for control_type column in refresh_config_updater table: %. Must be "time" or "serial"', v_type;
END IF;

END
$$;



/*
 *  Refresh insert/update only table based on timestamp control field
 */
CREATE FUNCTION refresh_updater_serial(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start bigint DEFAULT NULL, p_repull_end bigint DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0;
v_boundary_sql          text;
v_boundary              int;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_schema_name      text;
v_dest_table            text;
v_dest_table_name       text;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          bigint;
v_last_value            bigint;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int := 1;
v_pk_name               text[];
v_remote_boundry_sql    text;
v_remote_boundry        timestamptz;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_sql                   text;
v_src_schema_name       text;
v_src_table_name        text;
v_step_id               int;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Updater: '||p_destination;

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_updater_refresh_'||p_destination);

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , control
    , last_value
    , boundary
    , pk_name
    , filter
    , condition
    , batch_limit  
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_pk_name
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_updater_serial
WHERE dest_table = p_destination;
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name;
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

SELECT schemaname, tablename 
INTO v_dest_schema_name, v_dest_table_name
FROM pg_catalog.pg_tables
WHERE schemaname||'.'||tablename = v_dest_table;

IF v_dest_table_name IS NULL THEN
    RAISE EXCEPTION 'Destination table is missing (%)', v_dest_table;
END IF;

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

-- ensure all primary key columns are included in any column filters
IF v_filter IS NOT NULL THEN
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary/unique key for %',v_job_name; 
        END IF;
    END LOOP;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

SELECT array_to_string(p_cols, ',')
    , array_to_string(p_cols_n_types, ',') 
    , p_source_schema_name
    , p_source_table_name
INTO v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, NULL, v_dblink_name, p_debug);

IF v_src_table_name IS NULL THEN
    RAISE EXCEPTION 'Source table missing (%)', v_source_table;
END IF;

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

-- Unlike incremental time, there's nothing like CURRENT_TIMESTAMP to base the boundary on. So use the current source max to determine it.
-- For some reason this doesn't like using an int with %L (v_boundary) when making up the format command using dblink
v_sql := format('SELECT boundary FROM dblink(%L, ''SELECT max(%I) - '||v_boundary||' AS boundary FROM %I.%I'') AS (boundary bigint)'
                , v_dblink_name
                , v_control
                , v_src_schema_name
                , v_src_table_name);
PERFORM gdb(p_debug, v_sql);
EXECUTE v_sql INTO v_boundary;

-- Repull old data instead of normal new data pull
IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE format('TRUNCATE %I.%I', v_dest_schema_name, v_dest_table_name);
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := v_remote_sql ||format('%I < %L', v_control, v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, 0)||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, 0)||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L'
                                                , v_control
                                                , COALESCE(p_repull_start::bigint, 0)
                                                , v_control
                                                , COALESCE(p_repull_end::bigint, v_boundary));
        -- Delete the old local data. Use higher than bigint max upper boundary to ensure all old data is deleted
        v_delete_sql := format('DELETE FROM %I.%I WHERE %I > %L AND %I < %L'
                                , v_dest_schema_name
                                , v_dest_table_name
                                , v_control
                                , COALESCE(p_repull_start::bigint, 0)
                                , v_control
                                , COALESCE(p_repull_end::bigint, 9300000000000000000));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || 'rows removed');
        END IF;
    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L ORDER BY %I ASC LIMIT '||COALESCE(v_limit::text, 'ALL')
                                            , v_control
                                            , v_last_value
                                            , v_control
                                            , v_boundary
                                            , v_control);

    v_delete_sql := format('DELETE FROM %I.%I a USING mimeo_refresh_updater_temp t WHERE ', v_dest_schema_name, v_dest_table_name);

    WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
        IF v_pk_counter > 1 THEN
            v_delete_sql := v_delete_sql ||' AND ';
        END IF;
        v_delete_sql := v_delete_sql ||'a."'||v_pk_name[v_pk_counter]||'" = t."'||v_pk_name[v_pk_counter]||'"';
        v_pk_counter := v_pk_counter + 1;
    END LOOP;

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
END IF;

v_insert_sql := format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM mimeo_refresh_updater_temp', v_dest_schema_name, v_dest_table_name);

PERFORM gdb(p_debug,v_remote_sql);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new/updated records into local table');
END IF;
v_rowcount := 0;

EXECUTE 'CREATE TEMP TABLE mimeo_refresh_updater_temp ('||v_cols_n_types||')'; 
LOOP
    v_fetch_sql := 'INSERT INTO mimeo_refresh_updater_temp ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE format('SELECT max(%I) FROM mimeo_refresh_updater_temp', v_control) INTO v_last_fetched;
    IF v_limit IS NULL OR p_repull IS TRUE THEN -- insert into the real table in batches if no limit or a repull to avoid excessively large temp tables
        IF p_repull IS FALSE THEN   -- Delete any rows that exist in the current temp table batch. repull delete is done above.
            EXECUTE v_delete_sql;
        END IF;
        EXECUTE v_insert_sql;
        TRUNCATE mimeo_refresh_updater_temp;
    END IF;
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);
END IF;

IF v_limit IS NULL THEN
    -- nothing else to do
ELSIF p_repull IS FALSE THEN  -- don't care about limits when doing a repull
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');
    END IF;
    -- Not recommended that the batch actually equal the limit set if possible.
    IF v_total >= v_limit THEN
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE format('SELECT max(%I) FROM mimeo_refresh_updater_temp', v_control) INTO v_last_value;
        EXECUTE format('DELETE FROM mimeo_refresh_updater_temp WHERE %I = %L', v_control, v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached := 2;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached := 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        EXECUTE 'CREATE INDEX ON mimeo_refresh_updater_temp ("'||array_to_string(v_pk_name, '","')||'")'; -- incase of large batch limit
        ANALYZE mimeo_refresh_updater_temp;
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Deleting records marked for update in local table');
        END IF;
        PERFORM gdb(p_debug,v_delete_sql);
        EXECUTE v_delete_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Deleted '||v_rowcount||' records');
        END IF;

        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        perform gdb(p_debug,v_insert_sql);
        EXECUTE v_insert_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_rowcount||' records');
        END IF;
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE format('SELECT max(%I) FROM %I.%I', v_control, v_dest_schema_name, v_dest_table_name) INTO v_last_value;
    UPDATE refresh_config_updater_serial SET last_value = coalesce(v_last_value, 0), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '||coalesce(v_last_value, 0));
    END IF;
    PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, 0));
END IF;

DROP TABLE IF EXISTS mimeo_refresh_updater_temp;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';


EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Updater: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;


/*
 *  Refresh insert/update only table based on timestamp control field
 */
CREATE FUNCTION refresh_updater_time(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start timestamp DEFAULT NULL, p_repull_end timestamp DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_lock_wait int DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0;
v_boundary_sql          text;
v_boundary              timestamptz;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_schema_name      text;
v_dest_table            text;
v_dest_table_name       text;
v_dst_active            boolean;
v_dst_check             boolean;
v_dst_start             int;
v_dst_end               int;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          timestamptz;
v_last_value            timestamptz;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int := 1;
v_pk_name               text[];
v_remote_boundry_sql    text;
v_remote_boundry        timestamptz;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_src_schema_name       text;
v_src_table_name        text;
v_step_id               int;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Updater: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_updater_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , control
    , last_value
    , now() - boundary::interval
    , pk_name
    , filter
    , condition
    , dst_active
    , dst_start
    , dst_end
    , batch_limit  
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_pk_name
    , v_filter
    , v_condition
    , v_dst_active
    , v_dst_start
    , v_dst_end
    , v_limit
    , v_jobmon
FROM refresh_config_updater_time
WHERE dest_table = p_destination;
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name;
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := @extschema@.concurrent_lock_check(v_dest_table, p_lock_wait);
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

SELECT schemaname, tablename 
INTO v_dest_schema_name, v_dest_table_name
FROM pg_catalog.pg_tables
WHERE schemaname||'.'||tablename = v_dest_table;

IF v_dest_table_name IS NULL THEN
    RAISE EXCEPTION 'Destination table is missing (%)', v_dest_table;
END IF;

-- Do not allow this function to run during DST time change if config option is true. Otherwise will miss data from source
IF v_dst_active THEN
    v_dst_check := @extschema@.dst_change(CURRENT_TIMESTAMP);
    IF v_dst_check THEN 
        IF to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') > v_dst_start AND to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') < v_dst_end THEN
            IF v_jobmon THEN
                v_step_id := add_step( v_job_id, 'DST Check');
                PERFORM update_step(v_step_id, 'OK', 'Job CANCELLED - Does not run during DST time change');
                PERFORM close_job(v_job_id);
            END IF;
            UPDATE refresh_config_updater SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
            PERFORM gdb(p_debug, 'Cannot run during DST time change');
            EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
            RETURN;
        END IF;
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

-- ensure all primary key columns are included in any column filters
IF v_filter IS NOT NULL THEN
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary/unique key for %',v_job_name; 
        END IF;
    END LOOP;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

SELECT array_to_string(p_cols, ',')
    , array_to_string(p_cols_n_types, ',') 
    , p_source_schema_name
    , p_source_table_name
INTO v_cols
    , v_cols_n_types 
    , v_src_schema_name
    , v_src_table_name
FROM manage_dest_table(v_dest_table, NULL, v_dblink_name, p_debug);

IF v_src_table_name IS NULL THEN
    RAISE EXCEPTION 'Source table missing (%)', v_source_table;
END IF;

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

-- Repull old data instead of normal new data pull
IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE format('TRUNCATE %I.%I', v_dest_schema_name, v_dest_table_name);
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := v_remote_sql ||format('%I < %L', v_control, v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L'
                                                , v_control
                                                , COALESCE(p_repull_start, '-infinity')
                                                , v_control
                                                , COALESCE(p_repull_end, v_boundary));
        -- Delete the old local data. Use higher than upper boundary to ensure all old data is deleted
        v_delete_sql := format('DELETE FROM %I.%I WHERE %I > %L AND %I < %L'
                                , v_dest_schema_name
                                , v_dest_table_name
                                , v_control
                                , COALESCE(p_repull_start, '-infinity')
                                , v_control
                                , COALESCE(p_repull_end, 'infinity'));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || 'rows removed');
        END IF;

    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := format('SELECT '||v_cols||' FROM %I.%I', v_src_schema_name, v_src_table_name);
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql || format('%I > %L AND %I < %L ORDER BY %I ASC LIMIT '||COALESCE(v_limit::text, 'ALL')
                                    , v_control
                                    , v_last_value
                                    , v_control
                                    , v_boundary
                                    , v_control);

    v_delete_sql := format('DELETE FROM %I.%I a USING mimeo_refresh_updater_temp t WHERE ', v_dest_schema_name, v_dest_table_name);

    WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
        IF v_pk_counter > 1 THEN
            v_delete_sql := v_delete_sql ||' AND ';
        END IF;
            v_delete_sql := v_delete_sql ||'a."'||v_pk_name[v_pk_counter]||'" = t."'||v_pk_name[v_pk_counter]||'"';
        v_pk_counter := v_pk_counter + 1;
    END LOOP;

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
END IF;

v_insert_sql := format('INSERT INTO %I.%I ('||v_cols||') SELECT '||v_cols||' FROM mimeo_refresh_updater_temp', v_dest_schema_name, v_dest_table_name); 

PERFORM gdb(p_debug,v_remote_sql);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new/updated records into local table');
END IF;
v_rowcount := 0;

EXECUTE 'CREATE TEMP TABLE mimeo_refresh_updater_temp ('||v_cols_n_types||')'; 
LOOP
    v_fetch_sql := 'INSERT INTO mimeo_refresh_updater_temp ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE format('SELECT max(%I) FROM mimeo_refresh_updater_temp', v_control) INTO v_last_fetched;
    IF v_limit IS NULL OR p_repull IS TRUE THEN -- insert into the real table in batches if no limit or repull to avoid excessively large temp tables
        IF p_repull IS FALSE THEN   -- Delete any rows that exist in the current temp table batch. repull delete is done above.
            EXECUTE v_delete_sql;
        END IF;
        EXECUTE v_insert_sql;
        TRUNCATE mimeo_refresh_updater_temp;
    END IF;
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);     
END IF;

IF v_limit IS NULL THEN
    -- nothing else to do
ELSIF p_repull IS FALSE THEN -- don't care about limits when doing a repull
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');     
    END IF;
    -- Not recommended that the batch actually equal the limit set if possible.
    IF v_total >= v_limit THEN
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE format('SELECT max(%I) FROM mimeo_refresh_updater_temp', v_control) INTO v_last_value;
        EXECUTE format('DELETE FROM mimeo_refresh_updater_temp WHERE %I = %L', v_control, v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached := 2;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached := 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        EXECUTE 'CREATE INDEX ON mimeo_refresh_updater_temp ("'||array_to_string(v_pk_name, '","')||'")'; -- incase of large batch limit
        ANALYZE mimeo_refresh_updater_temp;
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Deleting records marked for update in local table');
        END IF;
        PERFORM gdb(p_debug,v_delete_sql);
        EXECUTE v_delete_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Deleted '||v_rowcount||' records');
        END IF;

        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        perform gdb(p_debug,v_insert_sql);
        EXECUTE v_insert_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_rowcount||' records');
        END IF;
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE format('SELECT max(%I) FROM %I.%I', v_control, v_dest_schema_name, v_dest_table_name) INTO v_last_value;
    UPDATE refresh_config_updater_time set last_value = coalesce(v_last_value, CURRENT_TIMESTAMP), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '||coalesce(v_last_value, CURRENT_TIMESTAMP));
    END IF;
    PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, CURRENT_TIMESTAMP));
END IF;

DROP TABLE IF EXISTS mimeo_refresh_updater_temp;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';


EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Updater: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;

-- Restore dropped object privileges
DO $$
DECLARE
v_row   record;
BEGIN
    FOR v_row IN SELECT statement FROM mimeo_preserve_privs_temp LOOP
        IF v_row.statement IS NOT NULL THEN
            EXECUTE v_row.statement;
        END IF;
    END LOOP;
END
$$;

DROP TABLE mimeo_preserve_privs_temp;