postgresql-9.5-mimeo 1.4.1-1 / usr / share / postgresql / 9.5 / extension / mimeo--1.1.1--1.2.0.sql

-- Now supports incremental replication for serial/id columns. Works the same as existing incremenetal replication for time.
    -- New p_type argument to inserter & updater maker functions to tell it which one you're using. Valid values are: "time" or "serial".
    -- For time based, control column must be a timestamp type. For serial based, control column must be an integer type.
    -- Only supports integer values greater than or equal to 0.
    -- The upper boundary for each refresh batch is always 1 less than the current max of the source at the time it ran. This means that the boundary value isn't typically going to be relevant like it is for time, especially if you're using sequences for the control column values. This also means that the destination will always be at least 1 value behind the master. 
    -- If you are not using a sequence for the control column values, and the same value will be inserted on the source in different commit sessions, be sure and set a boundary value so that replication does not copy anything within that range when the refresh runs. Example: Set the boundary to "5" if values within (max - 5) will still be inserting when the refresh runs.
-- The p_boundary parameter data type in inserter/updater_maker functions has changed from "interval" to "text" and now defaults to NULL. This is to allow setting a boundary for either time or serial with the same maker function. If left NULL, the default value will be based on whether you choose time or serial for the incremental type.
-- Fixed bug with incremental repull that all data might not be repulled. This would only happen on a rare edge case where the same exact value for the upper boundary was inserted multiple times right as replication ran. Some values would make it to the destination and would be considered the lower boundary for the next run and be excluded. You can use the row count validation function to check your existing data or just run a full repull to be sure you have everything on the destination. Note this was NOT an issue during normal refresh runs (this edge case was already handled there). This was only an issue when a full repull was done or during initial table setup.
-- Added check_name_length to all dblink connection names to avoid annoying warning messages and get more consistent connection names.

DROP FUNCTION inserter_maker(text, text, int, interval,text, boolean, text[], text, boolean, boolean);
DROP FUNCTION validate_rowcount(text, boolean, boolean);
DROP FUNCTION updater_maker(text, text, int, interval, text, boolean, text[], text, boolean, text[], text[], boolean);

CREATE TEMP TABLE mimeo_preserve_privs_temp (statement text);

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.inserter_maker(text, text, text, int, text, text, boolean, text[], text, boolean, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'inserter_maker'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.validate_rowcount(text, boolean, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'validate_rowcount'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.updater_maker(text, text, text, int, text, text, boolean, text[], text, boolean, text[], text[], boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'updater_maker'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_inserter_serial(text, integer, boolean, bigint, bigint, boolean, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_inserter'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_inserter_time(text, integer, boolean, timestamp, timestamp, boolean, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_inserter'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_updater_serial(text, integer, boolean, bigint, bigint, boolean, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_updater'; 

INSERT INTO mimeo_preserve_privs_temp 
SELECT 'GRANT EXECUTE ON FUNCTION @extschema@.refresh_updater_time(text, integer, boolean, timestamp, timestamp, boolean, boolean) TO '||string_agg(grantee::text, ',')||';' 
FROM information_schema.routine_privileges
WHERE routine_schema = '@extschema@'
AND routine_name = 'refresh_updater'; 


ALTER TABLE @extschema@.refresh_config_inserter RENAME TO refresh_config_inserter_time;
ALTER TABLE @extschema@.refresh_config_inserter_time RENAME CONSTRAINT refresh_config_inserter_dblink_fkey TO refresh_config_inserter_time_dblink_fkey;
ALTER TABLE @extschema@.refresh_config_inserter_time RENAME CONSTRAINT refresh_config_inserter_dest_table_pkey TO refresh_config_inserter_time_dest_table_pkey;
ALTER TABLE @extschema@.refresh_config_inserter_time DROP CONSTRAINT refresh_config_inserter_type_check;
ALTER TABLE @extschema@.refresh_config_inserter_time ALTER COLUMN type SET DEFAULT 'inserter_time';
UPDATE @extschema@.refresh_config_inserter_time SET type = 'inserter_time';
ALTER TABLE @extschema@.refresh_config_inserter_time ADD CONSTRAINT refresh_config_inserter_type_chk CHECK (type = 'inserter_time');

CREATE TABLE refresh_config_inserter (LIKE @extschema@.refresh_config INCLUDING ALL) INHERITS (@extschema@.refresh_config);
SELECT pg_catalog.pg_extension_config_dump('refresh_config_inserter', '');
ALTER TABLE @extschema@.refresh_config_inserter ADD COLUMN source_table text NOT NULL;
ALTER TABLE @extschema@.refresh_config_inserter ADD COLUMN control text NOT NULL;
CREATE RULE refresh_config_inserter_parent_nodata AS ON INSERT TO @extschema@.refresh_config_inserter DO INSTEAD NOTHING;

ALTER TABLE @extschema@.refresh_config_inserter_time NO INHERIT @extschema@.refresh_config;
ALTER TABLE @extschema@.refresh_config_inserter_time INHERIT @extschema@.refresh_config_inserter;

CREATE TABLE refresh_config_inserter_serial (LIKE @extschema@.refresh_config_inserter INCLUDING ALL) INHERITS (@extschema@.refresh_config_inserter);
SELECT pg_catalog.pg_extension_config_dump('refresh_config_inserter_serial', '');
ALTER TABLE @extschema@.refresh_config_inserter_serial ADD CONSTRAINT refresh_config_inserter_serial_dest_table_pkey PRIMARY KEY (dest_table);
ALTER TABLE @extschema@.refresh_config_inserter_serial ADD CONSTRAINT refresh_config_inserter_serial_dblink_fkey FOREIGN KEY (dblink) REFERENCES @extschema@.dblink_mapping_mimeo(data_source_id);
ALTER TABLE @extschema@.refresh_config_inserter_serial ADD COLUMN boundary int NOT NULL DEFAULT 0;
ALTER TABLE @extschema@.refresh_config_inserter_serial ADD COLUMN last_value bigint NOT NULL DEFAULT 0;
ALTER TABLE @extschema@.refresh_config_inserter_serial ALTER COLUMN type SET DEFAULT 'inserter_serial';
ALTER TABLE @extschema@.refresh_config_inserter_serial ADD CONSTRAINT refresh_config_inserter_type_chk CHECK (type = 'inserter_serial');

ALTER TABLE @extschema@.refresh_config_updater RENAME TO refresh_config_updater_time;
ALTER TABLE @extschema@.refresh_config_updater_time RENAME CONSTRAINT refresh_config_updater_dest_table_pkey TO refresh_config_updater_time_dest_table_pkey;
ALTER TABLE @extschema@.refresh_config_updater_time RENAME CONSTRAINT refresh_config_updater_dblink_fkey TO refresh_config_updater_time_dblink_fkey;
ALTER TABLE @extschema@.refresh_config_updater_time DROP CONSTRAINT refresh_config_updater_type_check;
ALTER TABLE @extschema@.refresh_config_updater_time ALTER COLUMN type SET DEFAULT 'updater_time';
UPDATE @extschema@.refresh_config_updater_time SET type = 'updater_time';
ALTER TABLE @extschema@.refresh_config_updater_time ADD CONSTRAINT refresh_config_updater_type_chk CHECK (type = 'updater_time');

CREATE TABLE refresh_config_updater (LIKE @extschema@.refresh_config INCLUDING ALL) INHERITS (@extschema@.refresh_config);
SELECT pg_catalog.pg_extension_config_dump('refresh_config_updater', '');
ALTER TABLE @extschema@.refresh_config_updater ADD COLUMN source_table text NOT NULL;
ALTER TABLE @extschema@.refresh_config_updater ADD COLUMN control text NOT NULL;
ALTER TABLE @extschema@.refresh_config_updater ADD COLUMN pk_name text[] NOT NULL; 
ALTER TABLE @extschema@.refresh_config_updater ADD COLUMN pk_type text[] NOT NULL;
CREATE RULE refresh_config_updater_parent_nodata AS ON INSERT TO @extschema@.refresh_config_updater DO INSTEAD NOTHING;

ALTER TABLE @extschema@.refresh_config_updater_time NO INHERIT @extschema@.refresh_config;
ALTER TABLE @extschema@.refresh_config_updater_time INHERIT @extschema@.refresh_config_updater;

CREATE TABLE refresh_config_updater_serial (LIKE @extschema@.refresh_config_updater INCLUDING ALL) INHERITS (@extschema@.refresh_config_updater);
SELECT pg_catalog.pg_extension_config_dump('refresh_config_updater_serial', '');
ALTER TABLE @extschema@.refresh_config_updater_serial ADD CONSTRAINT refresh_config_updater_serial_dest_table_pkey PRIMARY KEY (dest_table);
ALTER TABLE @extschema@.refresh_config_updater_serial ADD CONSTRAINT refresh_config_updater_serial_dblink_fkey FOREIGN KEY (dblink) REFERENCES @extschema@.dblink_mapping_mimeo(data_source_id);
ALTER TABLE @extschema@.refresh_config_updater_serial ADD COLUMN boundary int NOT NULL DEFAULT 0;
ALTER TABLE @extschema@.refresh_config_updater_serial ADD COLUMN last_value bigint NOT NULL DEFAULT 0;
ALTER TABLE @extschema@.refresh_config_updater_serial ALTER COLUMN type SET DEFAULT 'updater_serial';
ALTER TABLE @extschema@.refresh_config_updater_serial ADD CONSTRAINT refresh_config_updater_type_chk CHECK (type = 'updater_serial');


/*
 * Do not allow both serial & time inserter replication for the same dest table
 */
CREATE FUNCTION unique_inserter_dest_trig() RETURNS trigger
    LANGUAGE plpgsql
    AS $$
DECLARE
v_exists    boolean;
BEGIN
    SELECT 
        CASE 
            WHEN count(*) = 1 THEN true 
            ELSE false 
        END 
    INTO v_exists
    FROM @extschema@.refresh_config_inserter 
    WHERE dest_table = NEW.dest_table;

    IF v_exists THEN
        RAISE EXCEPTION 'Inserter replication already defined for %', NEW.dest_table;
    END IF;
    RETURN NEW;
END
$$;

CREATE TRIGGER unique_inserter_dest_trig
BEFORE INSERT OR UPDATE OF dest_table
ON @extschema@.refresh_config_inserter_serial
FOR EACH ROW EXECUTE PROCEDURE @extschema@.unique_inserter_dest_trig();

CREATE TRIGGER unique_inserter_dest_trig
BEFORE INSERT OR UPDATE OF dest_table
ON @extschema@.refresh_config_inserter_time
FOR EACH ROW EXECUTE PROCEDURE @extschema@.unique_inserter_dest_trig();


/*
 * Do not allow both serial & time updater replication for the same dest table
 */
CREATE FUNCTION unique_updater_dest_trig() RETURNS trigger
    LANGUAGE plpgsql
    AS $$
DECLARE
v_exists    boolean;
BEGIN
    SELECT 
        CASE 
            WHEN count(*) = 1 THEN true
            ELSE false 
        END 
    INTO v_exists
    FROM @extschema@.refresh_config_updater
    WHERE dest_table = NEW.dest_table;

    IF v_exists THEN
        RAISE EXCEPTION 'Updater replication already defined for %', NEW.dest_table;
    END IF;
    RETURN NEW;
END
$$;

CREATE TRIGGER unique_updater_dest_trig
BEFORE INSERT OR UPDATE OF dest_table
ON @extschema@.refresh_config_updater_serial
FOR EACH ROW EXECUTE PROCEDURE @extschema@.unique_updater_dest_trig();

CREATE TRIGGER unique_updater_dest_trig
BEFORE INSERT OR UPDATE OF dest_table
ON @extschema@.refresh_config_updater_time
FOR EACH ROW EXECUTE PROCEDURE @extschema@.unique_updater_dest_trig();


/*
 * Parent function for running either time or serial based inserter replication
 */
CREATE OR REPLACE FUNCTION refresh_inserter(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start text DEFAULT NULL, p_repull_end text DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE
    v_type      text;
BEGIN

SELECT type INTO v_type FROM @extschema@.refresh_config_inserter WHERE dest_table = p_destination;
IF v_type = 'inserter_time' THEN
    PERFORM @extschema@.refresh_inserter_time(p_destination, p_limit, p_repull, p_repull_start::timestamp, p_repull_end::timestamp, p_jobmon, p_debug);
ELSIF v_type = 'inserter_serial' THEN
    PERFORM @extschema@.refresh_inserter_serial(p_destination, p_limit, p_repull, p_repull_start::bigint, p_repull_end::bigint, p_jobmon, p_debug);
ELSIF v_type IS NULL THEN
    RAISE EXCEPTION 'No configuration found for refresh_inserter on table %', p_destination;
ELSE
    RAISE EXCEPTION 'Invalid value for control_type column in refresh_config_inserter table: %. Must be "time" or "serial"', v_type;
END IF;

END
$$;


/*
 *  Refresh insert only table based on serial control field
 */
CREATE FUNCTION refresh_inserter_serial(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start bigint DEFAULT NULL, p_repull_end bigint DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0; 
v_boundary              int;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_table            text;
v_fetch_sql             text;
v_filter                text[]; 
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          bigint;
v_last_value            bigint;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_step_id               int;
v_tmp_table             text;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Inserter: '||p_destination;

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_inserter_refresh_'||p_destination);

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , 'tmp_'||replace(dest_table,'.','_')
    , dblink
    , control
    , last_value
    , boundary
    , filter
    , condition
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_tmp_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_inserter_serial
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;  

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_inserter'), hashtext(v_job_name));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

IF v_filter IS NULL THEN 
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND attnum > 0 AND attisdropped is false;
ELSE
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND ARRAY[attname::text] <@ v_filter AND attnum > 0 AND attisdropped is false;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

EXECUTE 'SELECT boundary FROM dblink('||quote_literal(v_dblink_name)||', ''SELECT max('||v_control||') - '||v_boundary||' as boundary FROM '||v_source_table||''') AS (boundary bigint)' INTO v_boundary;
IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE 'TRUNCATE '||v_dest_table;
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := v_remote_sql ||v_control||' < '||quote_literal(v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, '0')||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, '0')||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(COALESCE(p_repull_start, 0))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, v_boundary));
        -- Delete the old local data. Use higher than bigint max upper boundary to ensure all old data is deleted
        v_delete_sql := 'DELETE FROM '||v_dest_table||' WHERE '||v_control||' > '||quote_literal(COALESCE(p_repull_start, 0))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, 9300000000000000000));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || 'rows removed');
        END IF;
    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(v_last_value)||' AND '||v_control||' < '||quote_literal(v_boundary)||' ORDER BY '||v_control||' ASC LIMIT '|| COALESCE(v_limit::text, 'ALL');

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);

END IF;

EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||' ('||v_cols_n_types||')';
PERFORM gdb(p_debug,v_remote_sql);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new records into local table');
END IF;
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO '||v_tmp_table||'('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_fetched;
    IF v_limit IS NULL THEN -- insert into the real table in batches if no limit to avoid excessively large temp tables
        EXECUTE 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table;
        EXECUTE 'TRUNCATE '||v_tmp_table;
    END IF;
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);
END IF;

IF v_limit IS NULL THEN
    -- nothing else to do
ELSE
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');
    END IF;
    PERFORM gdb(p_debug, 'Checking for batch limit issues');
    -- Not recommended that the batch actually equal the limit set if possible. Handle all edge cases to keep data consistent
    IF v_total >= v_limit THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
        END IF;
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_value;
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE 'DELETE FROM '||v_tmp_table||' WHERE '||v_control||' = '||quote_literal(v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached = 2;
        v_total := v_total - v_rowcount;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same serial value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows desired ('||v_limit||') or greaer and all contained the same serial value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached = 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        EXECUTE 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' records');
        END IF;
        PERFORM gdb(p_debug, 'Inserted '||v_total||' records');
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE 'SELECT max('||v_control||') FROM '|| v_dest_table INTO v_last_value;
    UPDATE refresh_config_inserter_serial set last_value = coalesce(v_last_value, 0), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '|| coalesce(v_last_value, 0));
        PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, 0));
    END IF;
END IF;

EXECUTE 'DROP TABLE IF EXISTS ' || v_tmp_table;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Inserter: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
                  EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
END
$$;


/*
 *  Refresh insert only table based on timestamp control field
 */
CREATE FUNCTION refresh_inserter_time(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start timestamp DEFAULT NULL, p_repull_end timestamp DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0; 
v_boundary              timestamptz;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_table            text;
v_dst_active            boolean;
v_dst_check             boolean;
v_dst_start             int;
v_dst_end               int;
v_fetch_sql             text;
v_filter                text[]; 
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          timestamptz;
v_last_value            timestamptz;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_step_id               int;
v_tmp_table             text;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Inserter: '||p_destination;

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_inserter_refresh_'||p_destination);

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , 'tmp_'||replace(dest_table,'.','_')
    , dblink
    , control
    , last_value
    , now() - boundary::interval
    , filter
    , condition
    , dst_active
    , dst_start
    , dst_end
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_tmp_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_filter
    , v_condition
    , v_dst_active
    , v_dst_start
    , v_dst_end
    , v_limit
    , v_jobmon
FROM refresh_config_inserter_time
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;  

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_inserter'), hashtext(v_job_name));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

-- Do not allow this function to run during DST time change if config option is true. Otherwise will miss data from source
IF v_dst_active THEN
    v_dst_check := @extschema@.dst_change(CURRENT_TIMESTAMP);
    IF v_dst_check THEN 
        IF to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') > v_dst_start AND to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') < v_dst_end THEN
            IF v_jobmon THEN
                v_step_id := add_step( v_job_id, 'DST Check');
                PERFORM update_step(v_step_id, 'OK', 'Job CANCELLED - Does not run during DST time change');
                PERFORM close_job(v_job_id);
            END IF;
            PERFORM gdb(p_debug, 'Cannot run during DST time change');
            UPDATE refresh_config_inserter SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
            EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
            RETURN;
        END IF;
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

IF v_filter IS NULL THEN 
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND attnum > 0 AND attisdropped is false;
ELSE
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND ARRAY[attname::text] <@ v_filter AND attnum > 0 AND attisdropped is false;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE 'TRUNCATE '||v_dest_table;
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := v_remote_sql ||v_control||' < '||quote_literal(v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(COALESCE(p_repull_start, '-infinity'))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, v_boundary));
        -- Delete the old local data. Use higher than upper boundary to ensure all old data is deleted
        v_delete_sql := 'DELETE FROM '||v_dest_table||' WHERE '||v_control||' > '||quote_literal(COALESCE(p_repull_start, '-infinity'))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, 'infinity'));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || 'rows removed');
        END IF;
    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(v_last_value)||' AND '||v_control||' < '||quote_literal(v_boundary)||' ORDER BY '||v_control||' ASC LIMIT '|| COALESCE(v_limit::text, 'ALL');

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);

END IF;

EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||' ('||v_cols_n_types||')';
PERFORM gdb(p_debug,v_remote_sql);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new records into local table');
END IF;
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO '||v_tmp_table||'('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_fetched;
    IF v_limit IS NULL THEN -- insert into the real table in batches if no limit to avoid excessively large temp tables
        EXECUTE 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table;
        EXECUTE 'TRUNCATE '||v_tmp_table;
    END IF;
    EXIT WHEN v_rowcount = 0;        
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);
END IF;

IF v_limit IS NULL THEN
    -- nothing else to do
ELSE
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');
    END IF;
    PERFORM gdb(p_debug, 'Checking for batch limit issues');
    -- Not recommended that the batch actually equal the limit set if possible. Handle all edge cases to keep data consistent
    IF v_total >= v_limit THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
        END IF;
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_value;
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE 'DELETE FROM '||v_tmp_table||' WHERE '||v_control||' = '||quote_literal(v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached = 2;
        v_total := v_total - v_rowcount;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows desired ('||v_limit||') or greaer and all contained the same timestamp value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached = 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        EXECUTE 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' records');
        END IF;
        PERFORM gdb(p_debug, 'Inserted '||v_total||' records');
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE 'SELECT max('||v_control||') FROM '|| v_dest_table INTO v_last_value;
    UPDATE refresh_config_inserter_time set last_value = coalesce(v_last_value, CURRENT_TIMESTAMP), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '|| coalesce(v_last_value, CURRENT_TIMESTAMP));
        PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, CURRENT_TIMESTAMP));
    END IF;
END IF;

EXECUTE 'DROP TABLE IF EXISTS ' || v_tmp_table;

-- TODO remove
RAISE NOTICE 'Table dropped';

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- TODO remove
RAISE NOTICE 'Job closed';

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Inserter: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
                  EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;    
END
$$;


/*
 *  Inserter maker function. 
 */
CREATE FUNCTION inserter_maker(
    p_src_table text
    , p_type text
    , p_control_field text
    , p_dblink_id int
    , p_boundary text DEFAULT NULL
    , p_dest_table text DEFAULT NULL
    , p_index boolean DEFAULT true
    , p_filter text[] DEFAULT NULL
    , p_condition text DEFAULT NULL
    , p_pulldata boolean DEFAULT true
    , p_debug boolean DEFAULT false) 
RETURNS void
    LANGUAGE plpgsql
    AS $$
DECLARE

v_boundary_serial           int;
v_boundary_time             interval;
v_data_source               text;
v_dest_schema_name          text;
v_dest_table_name           text;
v_dst_active                boolean;
v_jobmon                    boolean;
v_insert_refresh_config     text;
v_max_id                    bigint;
v_max_timestamp             timestamptz;
v_table_exists              boolean;

BEGIN

SELECT data_source INTO v_data_source FROM @extschema@.dblink_mapping_mimeo WHERE data_source_id = p_dblink_id; 
IF NOT FOUND THEN
    RAISE EXCEPTION 'Database link ID is incorrect %', p_dblink_id; 
END IF;

IF (p_type <> 'time' AND p_type <> 'serial') OR p_type IS NULL THEN
    RAISE EXCEPTION 'Invalid inserter type: %. Must be either "time" or "serial"', p_type;
END IF;

IF p_dest_table IS NULL THEN
    p_dest_table := p_src_table;
END IF;

IF position('.' in p_dest_table) > 0 AND position('.' in p_src_table) > 0 THEN
    v_dest_schema_name := split_part(p_dest_table, '.', 1); 
    v_dest_table_name := split_part(p_dest_table, '.', 2);
ELSE
    RAISE EXCEPTION 'Source (and destination) table must be schema qualified';
END IF;

-- Determine if pg_jobmon is installed to set config table option below
SELECT 
    CASE 
        WHEN count(nspname) > 0 THEN true
        ELSE false
    END AS jobmon_schema
INTO v_jobmon 
FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;

IF p_type = 'time' THEN
    v_dst_active := @extschema@.dst_utc_check();
    IF p_boundary IS NULL THEN
        v_boundary_time = '10 minutes'::interval;
    ELSE
        v_boundary_time = p_boundary::interval;
    END IF;
    v_insert_refresh_config := 'INSERT INTO @extschema@.refresh_config_inserter_time (
            source_table
            , type
            , dest_table
            , dblink
            , control
            , boundary
            , last_value
            , last_run
            , dst_active
            , filter
            , condition
            , jobmon ) 
        VALUES('
            ||quote_literal(p_src_table)
            ||', '||quote_literal('inserter_time')
            ||', '||quote_literal(p_dest_table)
            ||', '||quote_literal(p_dblink_id)
            ||', '||quote_literal(p_control_field)
            ||', '||quote_literal(v_boundary_time)
            ||', '||quote_literal('0001-01-01'::date)
            ||', '||quote_literal(CURRENT_TIMESTAMP)
            ||', '||v_dst_active
            ||', '||COALESCE(quote_literal(p_filter), 'NULL')
            ||', '||COALESCE(quote_literal(p_condition), 'NULL')
            ||', '||v_jobmon||')';
ELSIF p_type = 'serial' THEN
    IF p_boundary IS NULL THEN
        v_boundary_serial = 10;
    ELSE
        v_boundary_serial = p_boundary::int;
    END IF;
    v_insert_refresh_config := 'INSERT INTO @extschema@.refresh_config_inserter_serial (
            source_table
            , type
            , dest_table
            , dblink
            , control
            , boundary
            , last_value
            , last_run
            , filter
            , condition
            , jobmon ) 
        VALUES('
            ||quote_literal(p_src_table)
            ||', '||quote_literal('inserter_serial')
            ||', '||quote_literal(p_dest_table)
            ||', '||quote_literal(p_dblink_id)
            ||', '||quote_literal(p_control_field)
            ||', '||quote_literal(v_boundary_serial)
            ||', '||quote_literal(0)
            ||', '||quote_literal(CURRENT_TIMESTAMP)
            ||', '||COALESCE(quote_literal(p_filter), 'NULL')
            ||', '||COALESCE(quote_literal(p_condition), 'NULL')
            ||', '||v_jobmon||')';
ELSE
    RAISE EXCEPTION 'Invalid inserter type: %. Must be either "time" or "serial"', p_type;
END IF;

PERFORM @extschema@.gdb(p_debug, 'v_insert_refresh_config: '||v_insert_refresh_config);
EXECUTE v_insert_refresh_config;

SELECT p_table_exists FROM @extschema@.manage_dest_table(p_dest_table, NULL, p_debug) INTO v_table_exists;

IF p_pulldata AND v_table_exists = false THEN
    RAISE NOTICE 'Pulling all data from source...';
    EXECUTE 'SELECT @extschema@.refresh_inserter('||quote_literal(p_dest_table)||', p_repull := true, p_debug := '||p_debug||')';
END IF;

IF p_index AND v_table_exists = false THEN
    PERFORM @extschema@.create_index(p_dest_table, NULL, p_debug);
END IF;

IF v_table_exists THEN
    RAISE NOTICE 'Destination table % already exists. No data or indexes were pulled from source', p_dest_table;
END IF;

IF p_type = 'time' THEN
    RAISE NOTICE 'Getting the maximum destination timestamp...';
    EXECUTE 'SELECT max('||p_control_field||') FROM '||p_dest_table||';' INTO v_max_timestamp;
    EXECUTE 'UPDATE @extschema@.refresh_config_inserter_time SET last_value = '||quote_literal(COALESCE(v_max_timestamp, CURRENT_TIMESTAMP))||' WHERE dest_table = '||quote_literal(p_dest_table);
ELSIF p_type = 'serial' THEN
    RAISE NOTICE 'Getting the maximum destination id...';
    EXECUTE 'SELECT max('||p_control_field||') FROM '||p_dest_table||';' INTO v_max_id;
    EXECUTE 'UPDATE @extschema@.refresh_config_inserter_serial SET last_value = '||COALESCE(v_max_id, 0)||' WHERE dest_table = '||quote_literal(p_dest_table);
END IF;


RAISE NOTICE 'Done';
END
$$;


/*
 * Simple row count compare. 
 * For any replication type other than inserter/updater, this will fail to run if replication is currently running.
 * For any replication type other than inserter/updater, this will pause replication for the given table until validation is complete
 */
CREATE FUNCTION validate_rowcount(p_destination text, p_src_incr_less boolean DEFAULT false, p_debug boolean DEFAULT false, OUT match boolean, OUT source_count bigint, OUT dest_count bigint, OUT min_source_value text, OUT max_source_value text) RETURNS record
    LANGUAGE plpgsql
    AS $$
DECLARE

v_adv_lock          boolean;
v_adv_lock_hash1    text;
v_adv_lock_hash2    text;
v_condition         text;
v_control           text;
v_dblink            int;
v_dblink_name       text;
v_dblink_schema     text;
v_dest_table        text;
v_link_exists       boolean;
v_local_sql         text;
v_max_dest_serial   bigint;
v_max_dest_time     timestamptz;
v_old_search_path   text;
v_remote_sql        text;
v_remote_min_sql    text;
v_source_min_serial bigint;
v_source_min_time   timestamptz;
v_source_table      text;
v_type              text;

BEGIN

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;

SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||v_dblink_schema||',public'',''true'')';

SELECT dest_table
    , type
    , dblink
    , condition
INTO v_dest_table
    , v_type
    , v_dblink
    , v_condition
FROM refresh_config
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'ERROR: This table is not set up for replication: %', p_destination; 
END IF;

CASE v_type
WHEN 'snap' THEN
    v_adv_lock_hash1 := 'refresh_snap';
    v_adv_lock_hash2 := 'Refresh Snap: '||v_dest_table;
    SELECT source_table INTO v_source_table FROM refresh_config_snap WHERE dest_table = v_dest_table;
WHEN 'inserter_time' THEN
    SELECT source_table, control INTO v_source_table, v_control FROM refresh_config_inserter WHERE dest_table = v_dest_table;
WHEN 'inserter_serial' THEN
    SELECT source_table, control INTO v_source_table, v_control FROM refresh_config_inserter WHERE dest_table = v_dest_table;
WHEN 'updater_time' THEN
    SELECT source_table, control INTO v_source_table, v_control FROM refresh_config_updater WHERE dest_table = v_dest_table;
WHEN 'updater_serial' THEN
    SELECT source_table, control INTO v_source_table, v_control FROM refresh_config_updater WHERE dest_table = v_dest_table;
WHEN 'dml' THEN
    v_adv_lock_hash1 := 'refresh_dml';
    v_adv_lock_hash2 := 'Refresh DML: '||v_dest_table;
    SELECT source_table INTO v_source_table FROM refresh_config_dml WHERE dest_table = v_dest_table;
WHEN 'logdel' THEN
    v_adv_lock_hash1 := 'refresh_logdel';
    v_adv_lock_hash2 := 'Refresh Log Del: '||v_dest_table;
    SELECT source_table INTO v_source_table FROM refresh_config_logdel WHERE dest_table = v_dest_table;
WHEN 'table' THEN
    v_adv_lock_hash1 := 'refresh_table';
    v_adv_lock_hash2 := v_dest_table;
    SELECT source_table INTO v_source_table FROM refresh_config_table WHERE dest_table = v_dest_table;
END CASE;

IF v_adv_lock_hash1 IS NOT NULL AND v_adv_lock_hash2 IS NOT NULL THEN
    v_adv_lock := pg_try_advisory_xact_lock(hashtext(v_adv_lock_hash1), hashtext(v_adv_lock_hash2));
    IF v_adv_lock = 'false' THEN
        RAISE EXCEPTION 'Validation cannot run while refresh for given table is running: %', v_dest_table;
        RETURN;
    END IF;
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_data_validation_'||v_dest_table);
PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

v_remote_sql := 'SELECT count(*) as row_count FROM '||v_source_table;
v_local_sql := 'SELECT count(*) FROM '||v_dest_table;
IF v_control IS NOT NULL THEN
    IF p_src_incr_less THEN  
        v_remote_min_sql := 'SELECT min('||v_control||') AS min_source FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_min_sql := v_remote_min_sql ||' '||v_condition;
        END IF;
        IF v_type = 'inserter_time' OR v_type = 'updater_time' THEN
            v_remote_min_sql := 'SELECT min_source FROM dblink('||quote_literal(v_dblink_name)||','||quote_literal(v_remote_min_sql)||') t (min_source timestamptz)';
            PERFORM gdb(p_debug, 'v_remote_min_sql: '||v_remote_min_sql);
            EXECUTE v_remote_min_sql INTO v_source_min_time;
            v_local_sql := v_local_sql || ' WHERE '||v_control|| ' >= '||quote_literal(v_source_min_time);
            min_source_value := v_source_min_time::text;
        ELSIF v_type = 'inserter_serial' OR v_type = 'updater_serial' THEN
            v_remote_min_sql := 'SELECT min_source FROM dblink('||quote_literal(v_dblink_name)||','||quote_literal(v_remote_min_sql)||') t (min_source bigint)';
            PERFORM gdb(p_debug, 'v_remote_min_sql: '||v_remote_min_sql);
            EXECUTE v_remote_min_sql INTO v_source_min_serial;
            v_local_sql := v_local_sql || ' WHERE '||v_control|| ' >= '||quote_literal(v_source_min_serial);
            min_source_value := v_source_min_serial::text;
        END IF;
    END IF;

    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql ||' '|| v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql ||' WHERE ';
    END IF;

    IF v_type = 'inserter_time' OR v_type = 'updater_time' THEN
        EXECUTE 'SELECT max('||quote_ident(v_control)||') FROM '||v_dest_table INTO v_max_dest_time;
        v_remote_sql := v_remote_sql ||v_control||' <= '||quote_literal(v_max_dest_time);
        max_source_value := v_max_dest_time::text;
    ELSIF v_type = 'inserter_serial' OR v_type = 'updater_serial' THEN
        EXECUTE 'SELECT max('||quote_ident(v_control)||') FROM '||v_dest_table INTO v_max_dest_serial;
        v_remote_sql := v_remote_sql ||v_control||' <= '||quote_literal(v_max_dest_serial);
        max_source_value := v_max_dest_serial::text;
    END IF;
    
ELSIF v_condition IS NOT NULL THEN
    v_remote_sql := v_remote_sql ||' '|| v_condition;
END IF;

v_remote_sql := 'SELECT row_count FROM dblink('||quote_literal(v_dblink_name)||','||quote_literal(v_remote_sql)||') t (row_count bigint)';
PERFORM gdb(p_debug, 'v_remote_sql: '||v_remote_sql);
EXECUTE v_remote_sql INTO source_count;
PERFORM gdb(p_debug, 'v_local_sql: '||v_local_sql);
EXECUTE v_local_sql INTO dest_count;

IF source_count = dest_count THEN
    match = true;
ELSE
    match = false;
END IF;

PERFORM dblink_disconnect(v_dblink_name);

EXCEPTION
    WHEN QUERY_CANCELED OR OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;



/*
 *  Refresh insert/update only table based on timestamp control field
 */
CREATE OR REPLACE FUNCTION refresh_updater(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start text DEFAULT NULL, p_repull_end text DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE
    v_type      text;
BEGIN

SELECT type INTO v_type FROM @extschema@.refresh_config_updater WHERE dest_table = p_destination;
IF v_type = 'updater_time' THEN
    PERFORM @extschema@.refresh_updater_time(p_destination, p_limit, p_repull, p_repull_start::timestamp, p_repull_end::timestamp, p_jobmon, p_debug);
ELSIF v_type = 'updater_serial' THEN
    PERFORM @extschema@.refresh_updater_serial(p_destination, p_limit, p_repull, p_repull_start::bigint, p_repull_end::bigint, p_jobmon, p_debug);
ELSIF v_type IS NULL THEN
    RAISE EXCEPTION 'No configuration found for refresh_updater on table %', p_destination;
ELSE
    RAISE EXCEPTION 'Invalid value for control_type column in refresh_config_updater table: %. Must be "time" or "serial"', v_type;
END IF;

END
$$;



/*
 *  Refresh insert/update only table based on timestamp control field
 */
CREATE FUNCTION refresh_updater_serial(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start bigint DEFAULT NULL, p_repull_end bigint DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0;
v_boundary_sql          text;
v_boundary              int;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_table            text;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          bigint;
v_last_value            bigint;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int := 1;
v_pk_name               text[];
v_remote_boundry_sql    text;
v_remote_boundry        timestamptz;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_step_id               int;
v_tmp_table             text;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Updater: '||p_destination;

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_updater_refresh_'||p_destination);

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , 'tmp_'||replace(dest_table,'.','_')
    , dblink
    , control
    , last_value
    , boundary
    , pk_name
    , filter
    , condition
    , batch_limit  
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_tmp_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_pk_name
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_updater_serial
WHERE dest_table = p_destination;
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name;
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_updater'), hashtext(v_job_name));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

-- determine column list, column type list
IF v_filter IS NULL THEN 
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',')
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND attnum > 0 AND attisdropped is false;
ELSE
    -- ensure all primary key columns are included in any column filters
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary/unique key for %',v_job_name; 
        END IF;
    END LOOP;
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND ARRAY[attname::text] <@ v_filter AND attnum > 0 AND attisdropped is false;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

EXECUTE 'SELECT boundary FROM dblink('||quote_literal(v_dblink_name)||', ''SELECT max('||v_control||') - '||v_boundary||' as boundary FROM '||v_source_table||''') AS (boundary bigint)' INTO v_boundary;
-- Repull old data instead of normal new data pull
IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE 'TRUNCATE '||v_dest_table;
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := v_remote_sql ||v_control||' < '||quote_literal(v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, 0)||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, 0)||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary remote max to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(COALESCE(p_repull_start, 0))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, v_boundary));
        -- Delete the old local data. Use higher than bigint max upper boundary to ensure all old data is deleted
        v_delete_sql := 'DELETE FROM '||v_dest_table||' WHERE '||v_control||' > '||quote_literal(COALESCE(p_repull_start, 0))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, 9300000000000000000));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || 'rows removed');
        END IF;
    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(v_last_value)||' AND '||v_control||' < '||quote_literal(v_boundary)||' ORDER BY '||v_control||' ASC LIMIT '|| COALESCE(v_limit::text, 'ALL');

    v_delete_sql := 'DELETE FROM '||v_dest_table||' USING '||v_tmp_table||' t WHERE ';

    WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
        IF v_pk_counter > 1 THEN
            v_delete_sql := v_delete_sql ||' AND ';
        END IF;
        v_delete_sql := v_delete_sql ||v_dest_table||'.'||v_pk_name[v_pk_counter]||' = t.'||v_pk_name[v_pk_counter];
        v_pk_counter := v_pk_counter + 1;
    END LOOP;

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
END IF;

v_insert_sql := 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table; 

PERFORM gdb(p_debug,v_remote_sql);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new/updated records into local table');
END IF;
v_rowcount := 0;

EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||' ('||v_cols_n_types||')'; 
LOOP            
    v_fetch_sql := 'INSERT INTO '||v_tmp_table||'('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_fetched;
    IF v_limit IS NULL OR p_repull IS TRUE THEN -- insert into the real table in batches if no limit or a repull to avoid excessively large temp tables
        IF p_repull IS FALSE THEN   -- Delete any rows that exist in the current temp table batch. repull delete is done above.
            EXECUTE v_delete_sql;
        END IF;
        EXECUTE v_insert_sql;
        EXECUTE 'TRUNCATE '||v_tmp_table;
    END IF;
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);     
END IF;
    
IF v_limit IS NULL THEN
    -- nothing else to do
ELSIF p_repull IS FALSE THEN  -- don't care about limits when doing a repull
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');     
    END IF;
    -- Not recommended that the batch actually equal the limit set if possible.
    IF v_total >= v_limit THEN
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_value;
        EXECUTE 'DELETE FROM '||v_tmp_table||' WHERE '||v_control||' = '||quote_literal(v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached := 2;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached := 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        EXECUTE 'CREATE INDEX ON '||v_tmp_table||' ('||array_to_string(v_pk_name, ',')||')'; -- incase of large batch limit
        EXECUTE 'ANALYZE '||v_tmp_table;       
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Deleting records marked for update in local table');
        END IF;
        PERFORM gdb(p_debug,v_delete_sql);
        EXECUTE v_delete_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Deleted '||v_rowcount||' records');
        END IF;

        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        perform gdb(p_debug,v_insert_sql);
        EXECUTE v_insert_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_rowcount||' records');
        END IF;
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE 'SELECT max('||v_control||') FROM '|| v_dest_table INTO v_last_value;
    UPDATE refresh_config_updater_serial set last_value = coalesce(v_last_value, 0), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '||coalesce(v_last_value, 0));
    END IF;
    PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, 0));
END IF;

EXECUTE 'DROP TABLE IF EXISTS '||v_tmp_table;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';


EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Updater: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;



/*
 *  Refresh insert/update only table based on timestamp control field
 */
CREATE FUNCTION refresh_updater_time(p_destination text, p_limit integer DEFAULT NULL, p_repull boolean DEFAULT false, p_repull_start timestamp DEFAULT NULL, p_repull_end timestamp DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   int := 0;
v_boundary_sql          text;
v_boundary              timestamptz;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_create_sql            text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_table            text;
v_dst_active            boolean;
v_dst_check             boolean;
v_dst_start             int;
v_dst_end               int;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_full_refresh          boolean := false;
v_insert_sql            text;
v_job_id                int;
v_jobmon                boolean;
v_jobmon_schema         text;
v_job_name              text;
v_last_fetched          timestamptz;
v_last_value            timestamptz;
v_limit                 int;
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int := 1;
v_pk_name               text[];
v_remote_boundry_sql    text;
v_remote_boundry        timestamptz;
v_remote_sql            text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_step_id               int;
v_tmp_table             text;
v_total                 bigint := 0;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Updater: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_updater_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , 'tmp_'||replace(dest_table,'.','_')
    , dblink
    , control
    , last_value
    , now() - boundary::interval
    , pk_name
    , filter
    , condition
    , dst_active
    , dst_start
    , dst_end
    , batch_limit  
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_tmp_table
    , v_dblink
    , v_control
    , v_last_value
    , v_boundary
    , v_pk_name
    , v_filter
    , v_condition
    , v_dst_active
    , v_dst_start
    , v_dst_end
    , v_limit
    , v_jobmon
FROM refresh_config_updater_time
WHERE dest_table = p_destination;
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name;
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_updater'), hashtext(v_job_name));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

-- Do not allow this function to run during DST time change if config option is true. Otherwise will miss data from source
IF v_dst_active THEN
    v_dst_check := @extschema@.dst_change(CURRENT_TIMESTAMP);
    IF v_dst_check THEN 
        IF to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') > v_dst_start AND to_number(to_char(CURRENT_TIMESTAMP, 'HH24MM'), '0000') < v_dst_end THEN
            IF v_jobmon THEN
                v_step_id := add_step( v_job_id, 'DST Check');
                PERFORM update_step(v_step_id, 'OK', 'Job CANCELLED - Does not run during DST time change');
                PERFORM close_job(v_job_id);
            END IF;
            UPDATE refresh_config_updater SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
            PERFORM gdb(p_debug, 'Cannot run during DST time change');
            EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
            RETURN;
        END IF;
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Building SQL');
END IF;

-- determine column list, column type list
IF v_filter IS NULL THEN 
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',')
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND attnum > 0 AND attisdropped is false;
ELSE
    -- ensure all primary key columns are included in any column filters
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary/unique key for %',v_job_name; 
        END IF;
    END LOOP;
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND ARRAY[attname::text] <@ v_filter AND attnum > 0 AND attisdropped is false;
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

-- Repull old data instead of normal new data pull
IF p_repull THEN
    -- Repull ALL data if no start and end values set
    IF p_repull_start IS NULL AND p_repull_end IS NULL THEN
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
        END IF;
        EXECUTE 'TRUNCATE '||v_dest_table;
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        v_remote_sql := v_remote_sql ||v_control||' < '||quote_literal(v_boundary);
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        END IF;
        PERFORM gdb(p_debug,'Request to repull data from '||COALESCE(p_repull_start, '-infinity')||' to '||COALESCE(p_repull_end, v_boundary));
        v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
        IF v_condition IS NOT NULL THEN
            v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
        ELSE
            v_remote_sql := v_remote_sql || ' WHERE ';
        END IF;
        -- Use upper boundary to avoid edge case of multiple upper boundary values inserting during refresh
        v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(COALESCE(p_repull_start, '-infinity'))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, v_boundary));
        -- Delete the old local data. Use higher than upper boundary to ensure all old data is deleted
        v_delete_sql := 'DELETE FROM '||v_dest_table||' WHERE '||v_control||' > '||quote_literal(COALESCE(p_repull_start, '-infinity'))||' AND '
            ||v_control||' < '||quote_literal(COALESCE(p_repull_end, 'infinity'));
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id, 'Deleting current, local data');
        END IF;
        PERFORM gdb(p_debug,'Deleting current, local data: '||v_delete_sql);
        EXECUTE v_delete_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', v_rowcount || 'rows removed');
        END IF;

    END IF;
ELSE
    -- does < for upper boundary to keep missing data from happening on rare edge case where a newly inserted row outside the transaction batch
    -- has the exact same timestamp as the previous batch's max timestamp
    v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
    IF v_condition IS NOT NULL THEN
        v_remote_sql := v_remote_sql || ' ' || v_condition || ' AND ';
    ELSE
        v_remote_sql := v_remote_sql || ' WHERE ';
    END IF;
    v_remote_sql := v_remote_sql ||v_control||' > '||quote_literal(v_last_value)||' AND '||v_control||' < '||quote_literal(v_boundary)||' ORDER BY '||v_control||' ASC LIMIT '|| COALESCE(v_limit::text, 'ALL');

    v_delete_sql := 'DELETE FROM '||v_dest_table||' USING '||v_tmp_table||' t WHERE ';

    WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
        IF v_pk_counter > 1 THEN
            v_delete_sql := v_delete_sql ||' AND ';
        END IF;
        v_delete_sql := v_delete_sql ||v_dest_table||'.'||v_pk_name[v_pk_counter]||' = t.'||v_pk_name[v_pk_counter];
        v_pk_counter := v_pk_counter + 1;
    END LOOP;

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
    END IF;
    PERFORM gdb(p_debug,'Grabbing rows from '||v_last_value::text||' to '||v_boundary::text);
END IF;

v_insert_sql := 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table; 

PERFORM gdb(p_debug,v_remote_sql);
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new/updated records into local table');
END IF;
v_rowcount := 0;

EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||' ('||v_cols_n_types||')'; 
LOOP            
    v_fetch_sql := 'INSERT INTO '||v_tmp_table||'('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_fetched;
    IF v_limit IS NULL OR p_repull IS TRUE THEN -- insert into the real table in batches if no limit or repull to avoid excessively large temp tables
        IF p_repull IS FALSE THEN   -- Delete any rows that exist in the current temp table batch. repull delete is done above.
            EXECUTE v_delete_sql;
        END IF;
        EXECUTE v_insert_sql;
        EXECUTE 'TRUNCATE '||v_tmp_table;
    END IF;
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far. Last fetched: '||v_last_fetched);
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Rows fetched: '||v_total);     
END IF;
    
IF v_limit IS NULL THEN
    -- nothing else to do
ELSIF p_repull IS FALSE THEN -- don't care about limits when doing a repull
    -- When using batch limits, entire batch must be pulled to temp table before inserting to real table to catch edge cases 
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Checking for batch limit issues');     
    END IF;
    -- Not recommended that the batch actually equal the limit set if possible.
    IF v_total >= v_limit THEN
        PERFORM gdb(p_debug, 'Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.'); 
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'WARNING','Row count fetched equal to or greater than limit set: '||v_limit||'. Recommend increasing batch limit if possible.');
            v_step_id := add_step(v_job_id, 'Removing high boundary rows from this batch to avoid missing data');       
        END IF;
        EXECUTE 'SELECT max('||v_control||') FROM '||v_tmp_table INTO v_last_value;
        EXECUTE 'DELETE FROM '||v_tmp_table||' WHERE '||v_control||' = '||quote_literal(v_last_value);
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Removed '||v_rowcount||' rows. Batch now contains '||v_limit - v_rowcount||' records');
        END IF;
        PERFORM gdb(p_debug, 'Removed '||v_rowcount||' rows from batch. Batch table now contains '||v_limit - v_rowcount||' records');
        v_batch_limit_reached := 2;
        IF (v_limit - v_rowcount) < 1 THEN
            IF v_jobmon THEN
                v_step_id := add_step(v_job_id, 'Reached inconsistent state');
                PERFORM update_step(v_step_id, 'CRITICAL', 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will ever be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            END IF;
            PERFORM gdb(p_debug, 'Batch contained max rows ('||v_limit||') or greater and all contained the same timestamp value. Unable to guarentee rows will be replicated consistently. Increase row limit parameter to allow a consistent batch.');
            v_batch_limit_reached := 3;
        END IF;
    ELSE
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','No issues found');
        END IF;
        PERFORM gdb(p_debug, 'No issues found');
    END IF;

    IF v_batch_limit_reached <> 3 THEN
        EXECUTE 'CREATE INDEX ON '||v_tmp_table||' ('||array_to_string(v_pk_name, ',')||')'; -- incase of large batch limit
        EXECUTE 'ANALYZE '||v_tmp_table;       
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Deleting records marked for update in local table');
        END IF;
        PERFORM gdb(p_debug,v_delete_sql);
        EXECUTE v_delete_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Deleted '||v_rowcount||' records');
        END IF;

        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Inserting new records into local table');
        END IF;
        perform gdb(p_debug,v_insert_sql);
        EXECUTE v_insert_sql; 
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Inserted '||v_rowcount||' records');
        END IF;
    END IF;

END IF; -- end v_limit IF

IF v_batch_limit_reached <> 3 THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Setting next lower boundary');
    END IF;
    EXECUTE 'SELECT max('||v_control||') FROM '|| v_dest_table INTO v_last_value;
    UPDATE refresh_config_updater_time set last_value = coalesce(v_last_value, CURRENT_TIMESTAMP), last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Lower boundary value is: '||coalesce(v_last_value, CURRENT_TIMESTAMP));
    END IF;
    PERFORM gdb(p_debug, 'Lower boundary value is: '||coalesce(v_last_value, CURRENT_TIMESTAMP));
END IF;

EXECUTE 'DROP TABLE IF EXISTS '||v_tmp_table;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = 0 THEN
        PERFORM close_job(v_job_id);
    ELSIF v_batch_limit_reached = 2 THEN
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    ELSIF v_batch_limit_reached = 3 THEN
        -- Really bad. Critical alert!
        PERFORM fail_job(v_job_id);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';


EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Updater: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;



/*
 *  Updater maker function.
 */ 
CREATE FUNCTION updater_maker(
    p_src_table text
    , p_type text
    , p_control_field text
    , p_dblink_id int
    , p_boundary text DEFAULT NULL
    , p_dest_table text DEFAULT NULL
    , p_index boolean DEFAULT true
    , p_filter text[] DEFAULT NULL
    , p_condition text DEFAULT NULL
    , p_pulldata boolean DEFAULT true
    , p_pk_name text[] DEFAULT NULL
    , p_pk_type text[] DEFAULT NULL
    , p_debug boolean DEFAULT false) 
RETURNS void
    LANGUAGE plpgsql
    AS $$
DECLARE

v_boundary_serial           int;
v_boundary_time             interval;
v_data_source               text;
v_dblink_name               text;
v_dblink_schema             text;
v_dest_schema_name          text;
v_dest_table_name           text;
v_dst_active                boolean;
v_field                     text;
v_insert_refresh_config     text;
v_jobmon                    boolean;
v_key_type                  text;
v_link_exists               boolean;
v_max_id                    bigint;
v_max_timestamp             timestamptz;
v_old_search_path           text;
v_pk_name                   text[] := p_pk_name;
v_pk_type                   text[] := p_pk_type;
v_remote_key_sql            text;
v_table_exists              boolean;
v_update_refresh_config     text;

BEGIN

v_dblink_name := @extschema@.check_name_length('mimeo_updater_maker_'||p_src_table);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||v_dblink_schema||',public'',''false'')';

IF (p_pk_name IS NULL AND p_pk_type IS NOT NULL) OR (p_pk_name IS NOT NULL AND p_pk_type IS NULL) THEN
    RAISE EXCEPTION 'Cannot manually set primary/unique key field(s) without defining type(s) or vice versa';
END IF;

SELECT data_source INTO v_data_source FROM @extschema@.dblink_mapping_mimeo WHERE data_source_id = p_dblink_id; 
IF NOT FOUND THEN
	RAISE EXCEPTION 'ERROR: database link ID is incorrect %', p_dblink_id; 
END IF;  

IF p_dest_table IS NULL THEN
    p_dest_table := p_src_table;
END IF;

IF position('.' in p_dest_table) > 0 AND position('.' in p_src_table) > 0 THEN
    v_dest_schema_name := split_part(p_dest_table, '.', 1); 
    v_dest_table_name := split_part(p_dest_table, '.', 2);
ELSE
    RAISE EXCEPTION 'Source (and destination) table must be schema qualified';
END IF;

PERFORM dblink_connect(v_dblink_name, @extschema@.auth(p_dblink_id));

-- Automatically get source primary/unique key if none given
IF p_pk_name IS NULL AND p_pk_type IS NULL THEN
    SELECT v_key_type, indkey_names, indkey_types INTO v_key_type, v_pk_name, v_pk_type FROM fetch_replication_key(p_src_table, v_dblink_name);
END IF;

IF v_pk_name IS NULL OR v_pk_type IS NULL THEN
    RAISE EXCEPTION 'Source table has no valid primary key or unique index';
END IF;

IF p_filter IS NOT NULL THEN
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(p_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'ERROR: filter list did not contain all columns that compose primary/unique key for source table %', p_src_table;
        END IF;
    END LOOP;
END IF;


-- Determine if pg_jobmon is installed to set config table option below
SELECT 
    CASE 
        WHEN count(nspname) > 0 THEN true
        ELSE false
    END AS jobmon_schema
INTO v_jobmon 
FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;

IF p_type = 'time' THEN
    v_dst_active := @extschema@.dst_utc_check();
    IF p_boundary IS NULL THEN
        v_boundary_time = '10 minutes'::interval;
    ELSE
        v_boundary_time = p_boundary::interval;
    END IF;
    v_insert_refresh_config := 'INSERT INTO @extschema@.refresh_config_updater_time(
            source_table
            , type
            , dest_table
            , dblink
            , control
            , boundary
            , pk_name
            , pk_type
            , last_value
            , last_run
            , dst_active
            , filter
            , condition
            , jobmon) 
        VALUES('
            ||quote_literal(p_src_table)
            ||', '||quote_literal('updater_time')
            ||', '||quote_literal(p_dest_table)
            ||', '||quote_literal(p_dblink_id)
            ||', '||quote_literal(p_control_field)
            ||', '||quote_literal(v_boundary_time)
            ||', '||quote_literal(v_pk_name)
            ||', '||quote_literal(v_pk_type)
            ||', '||quote_literal('0001-01-01'::date)
            ||', '||quote_literal(CURRENT_TIMESTAMP)
            ||', '||v_dst_active
            ||', '||COALESCE(quote_literal(p_filter), 'NULL')
            ||', '||COALESCE(quote_literal(p_condition), 'NULL')
            ||', '||v_jobmon||')';
    PERFORM gdb(p_debug, 'v_insert_refresh_config: '||v_insert_refresh_config);
    EXECUTE v_insert_refresh_config;
ELSIF p_type = 'serial' THEN
    IF p_boundary IS NULL THEN
        v_boundary_serial = 10;
    ELSE
        v_boundary_serial = p_boundary::int;
    END IF;
    v_insert_refresh_config := 'INSERT INTO @extschema@.refresh_config_updater_serial(
            source_table
            , type
            , dest_table
            , dblink
            , control
            , boundary
            , pk_name
            , pk_type
            , last_value
            , last_run
            , filter
            , condition
            , jobmon) 
        VALUES('
            ||quote_literal(p_src_table)
            ||', '||quote_literal('updater_serial')
            ||', '||quote_literal(p_dest_table)
            ||', '||quote_literal(p_dblink_id)
            ||', '||quote_literal(p_control_field)
            ||', '||quote_literal(v_boundary_serial)
            ||', '||quote_literal(v_pk_name)
            ||', '||quote_literal(v_pk_type)
            ||', '||quote_literal(0)
            ||', '||quote_literal(CURRENT_TIMESTAMP)
            ||', '||COALESCE(quote_literal(p_filter), 'NULL')
            ||', '||COALESCE(quote_literal(p_condition), 'NULL')
            ||', '||v_jobmon||')';
    PERFORM gdb(p_debug, 'v_insert_refresh_config: '||v_insert_refresh_config);
    EXECUTE v_insert_refresh_config;
END IF;

SELECT p_table_exists FROM @extschema@.manage_dest_table(p_dest_table, NULL, p_debug) INTO v_table_exists;

IF p_pulldata AND v_table_exists = false THEN
    RAISE NOTICE 'Pulling all data from source...';
    EXECUTE 'SELECT @extschema@.refresh_updater('||quote_literal(p_dest_table)||', p_repull := true, p_debug := '||p_debug||')';
END IF;

IF p_index AND v_table_exists = false THEN
    PERFORM create_index(p_dest_table, NULL, p_debug);
ELSIF v_table_exists = false THEN
-- Ensure destination indexes that are needed for efficient replication are created even if p_index is set false
    PERFORM gdb(p_debug, 'Creating indexes needed for replication');
    IF v_key_type = 'primary' THEN
        EXECUTE 'ALTER TABLE '||p_dest_table||' ADD PRIMARY KEY('||array_to_string(v_pk_name, ',')||')';
    ELSE
        EXECUTE 'CREATE UNIQUE INDEX ON '||p_dest_table||' ('||array_to_string(v_pk_name, ',')||')';
    END IF;
END IF;

IF v_table_exists THEN
    RAISE NOTICE 'Destination table % already exists. No data or indexes was pulled from source', p_dest_table;
END IF;

PERFORM dblink_disconnect(v_dblink_name);

IF p_type = 'time' THEN
    RAISE NOTICE 'Getting the maximum destination timestamp...';
    EXECUTE 'SELECT max('||p_control_field||') FROM '||p_dest_table||';' INTO v_max_timestamp;
    EXECUTE 'UPDATE @extschema@.refresh_config_updater_time SET last_value = '||quote_literal(COALESCE(v_max_timestamp, CURRENT_TIMESTAMP))||' WHERE dest_table = '||quote_literal(p_dest_table);
ELSIF p_type = 'serial' THEN
    RAISE NOTICE 'Getting the maximum destination id...';
    EXECUTE 'SELECT max('||p_control_field||') FROM '||p_dest_table||';' INTO v_max_id;
    EXECUTE 'UPDATE @extschema@.refresh_config_updater_serial SET last_value = '||COALESCE(v_max_id, 0)||' WHERE dest_table = '||quote_literal(p_dest_table);
END IF;

EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

RAISE NOTICE 'Done';

RETURN;

EXCEPTION
    WHEN QUERY_CANCELED OR OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;   
END  
$$;


/*
 * Manages creating destination table and/or returning data about the columns.
 * v_snap parameter is passed if snap table is being managed. Should be equal to either _snap1 or _snap2.
 */ 
CREATE OR REPLACE FUNCTION manage_dest_table (p_destination text, p_snap text, p_debug boolean DEFAULT false, OUT p_table_exists boolean, OUT p_cols text[], OUT p_cols_n_types text[]) RETURNS record
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_col_exists        int;
v_condition         text;
v_create_sql        text; 
v_dblink            int;
v_dblink_name       text;
v_dblink_schema     text; 
v_dest_table        text;
v_filter            text[];
v_link_exists       boolean;
v_remote_sql        text; 
v_old_search_path   text;
v_source_table      text;
v_type              text;

BEGIN

v_dblink_name := @extschema@.check_name_length('manage_dest_table_dblink_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;

SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||v_dblink_schema||',public'',''false'')';

SELECT dest_table
    , type
    , dblink
    , filter
    , condition
INTO v_dest_table
    , v_type
    , v_dblink
    , v_filter
    , v_condition
FROM refresh_config
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'ERROR: This table is not set up for replication: %', p_destination; 
END IF;

EXECUTE 'SELECT source_table FROM refresh_config_'||v_type||' WHERE dest_table = '||quote_literal(v_dest_table) INTO v_source_table;

IF p_snap IS NOT NULL AND p_snap NOT IN ('snap1', 'snap2') THEN
    RAISE EXCEPTION 'Invalid value for p_snap parameter given to manage_dest_table() function';
END IF;

PERFORM dblink_connect(v_dblink_name, @extschema@.auth(v_dblink));

-- Always return source column info in case extra columns were added to destination. Source columns should not be changed before destination.
v_remote_sql := 'SELECT array_agg(attname) as cols, array_agg(attname||'' ''||format_type(atttypid, atttypmod)::text) as cols_n_types FROM pg_attribute WHERE attrelid = '||quote_literal(v_source_table)||'::regclass AND attnum > 0 AND attisdropped is false';
IF v_filter IS NOT NULL THEN -- Apply column filters if used
    v_remote_sql := v_remote_sql || ' AND ARRAY[attname::text] <@ '||quote_literal(v_filter);
END IF;
v_remote_sql := 'SELECT cols, cols_n_types FROM dblink('||quote_literal(v_dblink_name)||', ' || quote_literal(v_remote_sql) || ') t (cols text[], cols_n_types text[])';
PERFORM gdb(p_debug,'v_remote_sql: '||v_remote_sql);
EXECUTE v_remote_sql INTO p_cols, p_cols_n_types;  
PERFORM gdb(p_debug,'p_cols: {'|| array_to_string(p_cols, ',') ||'}');
PERFORM gdb(p_debug,'p_cols_n_types: {'|| array_to_string(p_cols_n_types, ',') ||'}');

SELECT 
    CASE    
        WHEN count(1) > 0 THEN true
        ELSE false 
    END
INTO p_table_exists FROM pg_tables WHERE schemaname ||'.'|| tablename = v_dest_table || COALESCE('_'||p_snap, '');
IF p_table_exists = false THEN
    v_create_sql := 'CREATE TABLE ' || v_dest_table || COALESCE('_'||p_snap, '') || ' (' || array_to_string(p_cols_n_types, ',') || ')';
    perform gdb(p_debug,'v_create_sql: '||v_create_sql::text);
    EXECUTE v_create_sql;
END IF;

IF v_type = 'logdel' THEN
    SELECT count(*) INTO v_col_exists FROM pg_attribute 
        WHERE attrelid = v_dest_table::regclass AND attname = 'mimeo_source_deleted' AND attisdropped = false;
    IF v_col_exists < 1 THEN
        EXECUTE 'ALTER TABLE '||v_dest_table||' ADD COLUMN mimeo_source_deleted timestamptz';
    ELSE
        RAISE WARNING 'Special column (mimeo_source_deleted) already exists on destination table (%)', v_dest_table;
    END IF;
END IF;

PERFORM dblink_disconnect(v_dblink_name);

EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED OR OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
        RAISE EXCEPTION '%', SQLERRM;   
END
$$;


/*
 * Create index(es) on destination table
 */
CREATE OR REPLACE FUNCTION create_index(p_destination text, p_snap text DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_dblink            int;
v_dblink_name       text;
v_dblink_schema     text;
v_dest_table        text;
v_dest_table_name   text;
v_filter            text;
v_link_exists       boolean;
v_old_search_path   text;
v_repl_index        oid;
v_remote_index_sql  text;
v_row               record;
v_source_table      text;
v_src_table_name    text;
v_statement         text;
v_type              text;

BEGIN

v_dblink_name := @extschema@.check_name_length('create_index_dblink_'||p_destination);
SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||v_dblink_schema||''',''false'')';

SELECT dest_table
    , type
    , dblink
    , filter
INTO v_dest_table
    , v_type
    , v_dblink
    , v_filter
FROM refresh_config
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'ERROR: This table is not set up for replication: %', p_destination; 
END IF;

EXECUTE 'SELECT source_table FROM refresh_config_'||v_type||' WHERE dest_table = '||quote_literal(v_dest_table) INTO v_source_table;

IF p_snap IS NOT NULL AND p_snap NOT IN ('snap1', 'snap2') THEN
    RAISE EXCEPTION 'Invalid value for p_snap parameter given to create_index() function';
END IF;

PERFORM dblink_connect(v_dblink_name, @extschema@.auth(v_dblink));

v_dest_table_name := split_part(v_dest_table, '.', 2);
SELECT tablename INTO v_src_table_name 
    FROM dblink(v_dblink_name, 'SELECT tablename FROM pg_catalog.pg_tables WHERE schemaname ||''.''|| tablename = '||quote_literal(v_source_table)) t (tablename text);

-- Gets primary key or unique index used by updater/dml/logdel replication (same function is called in their makers). 
-- Should only loop once, but just easier to keep code consistent with below method
FOR v_row IN SELECT indexrelid, key_type, indkey_names, statement FROM fetch_replication_key(v_source_table, v_dblink_name)
LOOP

    EXIT WHEN v_row.indexrelid IS NULL; -- function still returns a row full of nulls when nothing found

    IF v_row.key_type = 'primary' THEN
        v_statement := 'ALTER TABLE '||v_dest_table || COALESCE('_'||p_snap, '')||' ADD CONSTRAINT '||
            COALESCE(p_snap||'_', '')|| v_dest_table_name ||'_'||array_to_string(v_row.indkey_names, '_')||'_pk 
            PRIMARY KEY ('||array_to_string(v_row.indkey_names, ',')||')';
    ELSIF v_row.key_type = 'unique' THEN
        v_statement := v_row.statement;
        -- Replace source table name with destination
        v_statement := replace(v_statement, ' ON '||v_source_table, ' ON '||v_dest_table || COALESCE('_'||p_snap, ''));
        -- If source index name contains the table name, replace it with the destination table.
        v_statement := regexp_replace(v_statement, '(INDEX \w*)'||v_src_table_name||'(\w* ON)', '\1'||v_dest_table_name||'\2');
        -- If it's a snap table, prepend to ensure unique index name. 
        -- This is done separately from above replace because it must always be done even if the index name doesn't contain the source table
        IF p_snap IS NOT NULL THEN
            v_statement := replace(v_statement, 'UNIQUE INDEX ' , 'UNIQUE INDEX '||p_snap||'_');
        END IF;
    END IF;
    PERFORM gdb(p_debug, 'statement: ' || v_statement);
    EXECUTE v_statement;
    v_repl_index = v_row.indexrelid;
END LOOP;

-- Get all indexes other than one obtained above. 
-- Cannot set these indexes when column filters are in use because there's no easy way to check columns in expression indexes.
IF v_filter IS NULL THEN
    v_remote_index_sql := 'select c.relname AS src_table, pg_get_indexdef(i.indexrelid) as statement
        FROM pg_catalog.pg_index i
        JOIN pg_catalog.pg_class c ON i.indrelid = c.oid 
        WHERE i.indrelid = '||quote_literal(v_source_table)||'::regclass
        AND i.indisprimary IS false
        AND i.indisvalid';
    IF v_repl_index IS NOT NULL THEN
        v_remote_index_sql := v_remote_index_sql ||' AND i.indexrelid <> '||v_repl_index;
    END IF;

    FOR v_row IN EXECUTE 'SELECT src_table, statement FROM dblink('||quote_literal(v_dblink_name)||', '||quote_literal(v_remote_index_sql)||') t (src_table text, statement text)' LOOP
        v_statement := v_row.statement;
        -- Replace source table name with destination
        v_statement := replace(v_statement, ' ON '||v_source_table, ' ON '||v_dest_table || COALESCE('_'||p_snap, ''));
        -- If source index name contains the table name, replace it with the destination table.
        v_statement := regexp_replace(v_statement, '(INDEX \w*)'||v_src_table_name||'(\w* ON)', '\1'||v_dest_table_name||'\2');
        -- If it's a snap table, prepend to ensure unique index name. 
        -- This is done separately from above replace because it must always be done even if the index name doesn't contain the source table
        IF p_snap IS NOT NULL THEN
            v_statement := replace(v_statement, 'E INDEX ' , 'E INDEX '||p_snap||'_');
        END IF;
        PERFORM gdb(p_debug, 'statement: ' || v_statement);
        EXECUTE v_statement;        
    END LOOP;
END IF;

PERFORM dblink_disconnect(v_dblink_name);

EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED OR OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
        RAISE EXCEPTION '%', SQLERRM; 
END
$$;


/*
 *  Refresh based on DML (Insert, Update, Delete)
 */
CREATE OR REPLACE FUNCTION refresh_dml(p_destination text, p_limit int default NULL, p_repull boolean DEFAULT false, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   boolean := false;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_sql            text;
v_dest_table            text;
v_exec_status           text;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_insert_sql            text;
v_job_id                int;
v_jobmon_schema         text;
v_job_name              text;
v_jobmon                boolean;
v_limit                 int; 
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int;
v_pk_name_csv           text;
v_pk_name_type_csv      text := '';
v_pk_name               text[];
v_pk_type               text[];
v_pk_where              text := '';
v_remote_f_sql          text;
v_remote_q_sql          text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_step_id               int;
v_tmp_table             text;
v_total                 bigint := 0;
v_trigger_delete        text; 
v_trigger_update        text;
v_truncate_remote_q     text;
v_with_update           text;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh DML: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_dml_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , 'tmp_'||replace(dest_table,'.','_')
    , dblink
    , control
    , pk_name
    , pk_type
    , filter
    , condition
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_tmp_table
    , v_dblink
    , v_control
    , v_pk_name
    , v_pk_type
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_dml 
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_dml'), hashtext(v_job_name));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
    v_step_id := add_step(v_job_id,'Sanity check primary/unique key values');
END IF;

IF v_pk_name IS NULL OR v_pk_type IS NULL THEN
    RAISE EXCEPTION 'Primary key fields in refresh_config_dml must be defined';
END IF;

-- determine column list, column type list
IF v_filter IS NULL THEN 
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND attnum > 0 AND attisdropped is false;
ELSE
    -- ensure all primary key columns are included in any column filters
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary/unique key for %',v_job_name; 
        END IF;
    END LOOP;
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND ARRAY[attname::text] <@ v_filter AND attnum > 0 AND attisdropped is false;
END IF;    

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

v_pk_name_csv := array_to_string(v_pk_name, ',');
v_pk_counter := 1;
WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
    IF v_pk_counter > 1 THEN
        v_pk_name_type_csv := v_pk_name_type_csv || ', ';
        v_pk_where := v_pk_where ||' AND ';
    END IF;
    v_pk_name_type_csv := v_pk_name_type_csv ||v_pk_name[v_pk_counter]||' '||v_pk_type[v_pk_counter];
    v_pk_where := v_pk_where || ' a.'||v_pk_name[v_pk_counter]||' = b.'||v_pk_name[v_pk_counter];
    v_pk_counter := v_pk_counter + 1;
END LOOP;

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

-- update remote entries
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating remote trigger table');
END IF;
v_with_update := 'WITH a AS (SELECT '||v_pk_name_csv||' FROM '|| v_control ||' ORDER BY '||v_pk_name_csv||' LIMIT '|| COALESCE(v_limit::text, 'ALL') ||') UPDATE '||v_control||' b SET processed = true FROM a WHERE '||v_pk_where;
v_trigger_update := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','|| quote_literal(v_with_update)||')';
PERFORM gdb(p_debug,v_trigger_update);
EXECUTE v_trigger_update INTO v_exec_status;    
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;

IF p_repull THEN
    -- Do truncate of remote queue table here before full data pull is actually started to ensure all new changes are recorded
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
    END IF;
    PERFORM gdb(p_debug, 'Request to repull ALL data from source. This could take a while...');
    v_truncate_remote_q := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','||quote_literal('TRUNCATE TABLE '||v_control)||')';
    EXECUTE v_truncate_remote_q;

    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Truncating local table');
    END IF;
    PERFORM gdb(p_debug,'Truncating local table');
    EXECUTE 'TRUNCATE '||v_dest_table;
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;
    -- Define cursor query
    v_remote_f_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
ELSE
    EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||'_queue ('||v_pk_name_type_csv||', PRIMARY KEY ('||v_pk_name_csv||'))';
    -- Copy queue locally for use in removing updated/deleted rows
    v_remote_q_sql := 'SELECT DISTINCT '||v_pk_name_csv||' FROM '||v_control||' WHERE processed = true';
    PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_q_sql);
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Creating local queue temp table');
    END IF;
    v_rowcount := 0;
    LOOP
        v_fetch_sql := 'INSERT INTO '||v_tmp_table||'_queue ('||v_pk_name_csv||') 
            SELECT '||v_pk_name_csv||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_pk_name_type_csv||')';
        EXECUTE v_fetch_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        EXIT WHEN v_rowcount = 0;
        v_total := v_total + coalesce(v_rowcount, 0);
        PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
        END IF;
    END LOOP;
    PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
    EXECUTE 'CREATE INDEX ON '||v_tmp_table||'_queue ('||v_pk_name_csv||')';
    EXECUTE 'ANALYZE '||v_tmp_table||'_queue';
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
    END IF;
    PERFORM gdb(p_debug,'Temp queue table row count '||v_total::text);

    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Deleting records from local table');
    END IF;
    v_delete_sql := 'DELETE FROM '||v_dest_table||' a USING '||v_tmp_table||'_queue b WHERE '|| v_pk_where; 
    PERFORM gdb(p_debug,v_delete_sql);
    EXECUTE v_delete_sql; 
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    PERFORM gdb(p_debug,'Rows removed from local table before applying changes: '||v_rowcount::text);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Removed '||v_rowcount||' records');
    END IF;
    -- Define cursor query
    v_remote_f_sql := 'SELECT '||v_cols||' FROM '||v_source_table||' JOIN ('||v_remote_q_sql||') x USING ('||v_pk_name_csv||')';
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
END IF;

-- insert records to local table. Have to do temp table in case destination table is partitioned (returns 0 when inserting to parent)
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_f_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new records into local table');
END IF;
EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||'_full ('||v_cols_n_types||')';
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO '||v_tmp_table||'_full ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table||'_full';
    EXECUTE 'TRUNCATE '||v_tmp_table||'_full';
    EXIT WHEN v_rowcount = 0;
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
END IF;

IF p_repull = false AND v_total > (v_limit * .75) THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Row count warning');
        PERFORM update_step(v_step_id, 'WARNING','Row count fetched ('||v_total||') greater than 75% of batch limit ('||v_limit||'). Recommend increasing batch limit if possible.');
    END IF;
    v_batch_limit_reached := true;
END IF;

-- clean out rows from txn table
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Cleaning out rows from txn table');
END IF;
v_trigger_delete := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','||quote_literal('DELETE FROM '||v_control||' WHERE processed = true')||')'; 
PERFORM gdb(p_debug,v_trigger_delete);
EXECUTE v_trigger_delete INTO v_exec_status;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;
-- update activity status
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run in config table');
END IF;
UPDATE refresh_config_dml SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination; 
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Last run was '||CURRENT_TIMESTAMP);
END IF;
EXECUTE 'DROP TABLE IF EXISTS '||v_tmp_table||'_full';
EXECUTE 'DROP TABLE IF EXISTS '||v_tmp_table||'_queue';

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    IF v_batch_limit_reached = false THEN
        PERFORM close_job(v_job_id);
    ELSE
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    END IF;
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh DML: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||coalesce(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;


/*
 *  Refresh based on DML (Insert, Update, Delete), but logs all deletes on the destination table
 *  Destination table requires extra column: mimeo_source_deleted timestamptz
 */
CREATE OR REPLACE FUNCTION refresh_logdel(p_destination text, p_limit int DEFAULT NULL, p_repull boolean DEFAULT false, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock              boolean;
v_batch_limit_reached   boolean := false;
v_cols_n_types          text;
v_cols                  text;
v_condition             text;
v_control               text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_delete_d_sql          text;
v_delete_f_sql          text;
v_dest_table            text;
v_exec_status           text;
v_fetch_sql             text;
v_field                 text;
v_filter                text[];
v_insert_deleted_sql    text;
v_insert_sql            text;
v_job_id                int;
v_jobmon_schema         text;
v_jobmon                boolean;
v_job_name              text;
v_limit                 int; 
v_link_exists           boolean;
v_old_search_path       text;
v_pk_counter            int;
v_pk_name               text[];
v_pk_name_csv           text;
v_pk_name_type_csv      text := '';
v_pk_type               text[];
v_pk_where              text := '';
v_remote_d_sql          text;
v_remote_f_sql          text;
v_remote_q_sql          text;
v_rowcount              bigint := 0; 
v_source_table          text;
v_step_id               int;
v_tmp_table             text;
v_total                 bigint := 0;
v_trigger_delete        text; 
v_trigger_update        text;
v_truncate_remote_q     text;
v_with_update           text;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'warning', true );
END IF;

v_job_name := 'Refresh Log Del: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_logdel_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , 'tmp_'||replace(dest_table,'.','_')
    , dblink
    , control
    , pk_name
    , pk_type
    , filter
    , condition
    , batch_limit 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_tmp_table
    , v_dblink
    , v_control
    , v_pk_name
    , v_pk_type
    , v_filter
    , v_condition
    , v_limit
    , v_jobmon
FROM refresh_config_logdel 
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping
v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_logdel'), hashtext(v_job_name));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;


IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
    v_step_id := add_step(v_job_id,'Sanity check primary/unique key values');
END IF;

IF v_pk_name IS NULL OR v_pk_type IS NULL THEN
    RAISE EXCEPTION 'Primary key fields in refresh_config_logdel must be defined';
END IF;

-- determine column list, column type list
IF v_filter IS NULL THEN 
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',')
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attnum > 0 AND attisdropped is false AND attrelid = p_destination::regclass AND attname != 'mimeo_source_deleted';
ELSE
    -- ensure all primary key columns are included in any column filters
    FOREACH v_field IN ARRAY v_pk_name LOOP
        IF v_field = ANY(v_filter) THEN
            CONTINUE;
        ELSE
            RAISE EXCEPTION 'Filter list did not contain all columns that compose primary key for %',v_job_name; 
        END IF;
    END LOOP;
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND ARRAY[attname::text] <@ v_filter AND attnum > 0 AND attisdropped is false AND attname != 'mimeo_source_deleted' ;
END IF;    

IF p_limit IS NOT NULL THEN
    v_limit := p_limit;
END IF;

v_pk_name_csv := array_to_string(v_pk_name,',');
v_pk_counter := 1;
WHILE v_pk_counter <= array_length(v_pk_name,1) LOOP
    IF v_pk_counter > 1 THEN
        v_pk_name_type_csv := v_pk_name_type_csv || ', ';
        v_pk_where := v_pk_where ||' AND ';
    END IF;
    v_pk_name_type_csv := v_pk_name_type_csv ||v_pk_name[v_pk_counter]||' '||v_pk_type[v_pk_counter];
    v_pk_where := v_pk_where || ' a.'||v_pk_name[v_pk_counter]||' = b.'||v_pk_name[v_pk_counter];
    v_pk_counter := v_pk_counter + 1;
END LOOP;

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
END IF;

PERFORM dblink_connect(v_dblink_name, auth(v_dblink));

-- update remote entries
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating remote trigger table');
END IF;
v_with_update := 'WITH a AS (SELECT '||v_pk_name_csv||' FROM '|| v_control ||' ORDER BY '||v_pk_name_csv||' LIMIT '|| COALESCE(v_limit::text, 'ALL') ||') UPDATE '||v_control||' b SET processed = true FROM a WHERE '|| v_pk_where;
v_trigger_update := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','|| quote_literal(v_with_update)||')';
PERFORM gdb(p_debug,v_trigger_update);
EXECUTE v_trigger_update INTO v_exec_status;    
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;

-- create temp table for recording deleted rows
EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||'_deleted ('||v_cols_n_types||', mimeo_source_deleted timestamptz)';
v_remote_d_sql := 'SELECT '||v_cols||', mimeo_source_deleted FROM '||v_control||' WHERE processed = true and mimeo_source_deleted IS NOT NULL';
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_d_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Creating local queue temp table for deleted rows on source');
END IF;
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO '||v_tmp_table||'_deleted ('||v_cols||', mimeo_source_deleted) 
        SELECT '||v_cols||', mimeo_source_deleted FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||', mimeo_source_deleted timestamptz)';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    EXIT WHEN v_rowcount = 0;
    v_total := v_total + coalesce(v_rowcount, 0);
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
EXECUTE 'CREATE INDEX ON '||v_tmp_table||'_deleted ('||v_pk_name_csv||')';
EXECUTE 'ANALYZE '||v_tmp_table||'_deleted';
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
END IF;
PERFORM gdb(p_debug,'Temp deleted queue table row count '||v_total::text);  

IF p_repull THEN
    -- Do delete instead of truncate like refresh_dml to avoid missing rows between the above deleted queue fetch and here.
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Request to repull ALL data from source. This could take a while...');
    END IF;
    PERFORM gdb(p_debug, 'Request to repull ALL data from source. This could take a while...');
    v_truncate_remote_q := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','||quote_literal('DELETE FROM '||v_control||' WHERE processed = true')||')';
    PERFORM gdb(p_debug, v_truncate_remote_q);
    EXECUTE v_truncate_remote_q;

    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Removing local, undeleted rows');
    END IF;
    PERFORM gdb(p_debug,'Removing local, undeleted rows');
    EXECUTE 'DELETE FROM '||v_dest_table||' WHERE mimeo_source_deleted IS NULL';
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;

    -- Define cursor query
    v_remote_f_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
ELSE
    -- Do normal stuff here
    EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||'_queue ('||v_pk_name_type_csv||')';
    v_remote_q_sql := 'SELECT DISTINCT '||v_pk_name_csv||' FROM '||v_control||' WHERE processed = true and mimeo_source_deleted IS NULL';
    PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_q_sql);
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Creating local queue temp table for inserts/updates');
    END IF;
    v_rowcount := 0;
    LOOP
        v_fetch_sql := 'INSERT INTO '||v_tmp_table||'_queue ('||v_pk_name_csv||') 
            SELECT '||v_pk_name_csv||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_pk_name_type_csv||')';
        EXECUTE v_fetch_sql;
        GET DIAGNOSTICS v_rowcount = ROW_COUNT;
        EXIT WHEN v_rowcount = 0;
        v_total := v_total + coalesce(v_rowcount, 0);
        PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
        END IF;
    END LOOP;
    PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
    EXECUTE 'CREATE INDEX ON '||v_tmp_table||'_queue ('||v_pk_name_csv||')';
    EXECUTE 'ANALYZE '||v_tmp_table||'_queue';
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Number of rows inserted: '||v_total);
    END IF;
    PERFORM gdb(p_debug,'Temp inserts/updates queue table row count '||v_total::text);

    -- remove records from local table (inserts/updates)
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Removing insert/update records from local table');
    END IF;
    v_delete_f_sql := 'DELETE FROM '||v_dest_table||' a USING '||v_tmp_table||'_queue b WHERE '|| v_pk_where;
    PERFORM gdb(p_debug,v_delete_f_sql);
    EXECUTE v_delete_f_sql; 
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    PERFORM gdb(p_debug,'Insert/Update rows removed from local table before applying changes: '||v_rowcount::text);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Removed '||v_rowcount||' records');
    END IF;

    -- remove records from local table (deleted rows)
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Removing deleted records from local table');
    END IF;
    v_delete_d_sql := 'DELETE FROM '||v_dest_table||' a USING '||v_tmp_table||'_deleted b WHERE '|| v_pk_where;
    PERFORM gdb(p_debug,v_delete_d_sql);
    EXECUTE v_delete_d_sql; 
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    PERFORM gdb(p_debug,'Deleted rows removed from local table before applying changes: '||v_rowcount::text);
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Removed '||v_rowcount||' records');
    END IF;

    -- Remote full query for normal replication 
    v_remote_f_sql := 'SELECT '||v_cols||' FROM '||v_source_table||' JOIN ('||v_remote_q_sql||') x USING ('||v_pk_name_csv||')';
    IF v_condition IS NOT NULL THEN
        v_remote_f_sql := v_remote_f_sql || ' ' || v_condition;
    END IF;
END IF;

-- insert records to local table (inserts/updates). Have to do temp table in case destination table is partitioned (returns 0 when inserting to parent)
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_f_sql);
IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Inserting new/updated records into local table');
END IF;
EXECUTE 'CREATE TEMP TABLE '||v_tmp_table||'_full ('||v_cols_n_types||')'; 
v_rowcount := 0;
v_total := 0;
LOOP
    v_fetch_sql := 'INSERT INTO '||v_tmp_table||'_full ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    v_total := v_total + coalesce(v_rowcount, 0);
    EXECUTE 'INSERT INTO '||v_dest_table||' ('||v_cols||') SELECT '||v_cols||' FROM '||v_tmp_table||'_full';
    EXECUTE 'TRUNCATE '||v_tmp_table||'_full';
    EXIT WHEN v_rowcount = 0;    
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','New/updated rows inserted: '||v_total);
END IF;

-- insert records to local table (deleted rows to be kept)
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Inserting deleted records into local table');
END IF;
v_insert_deleted_sql := 'INSERT INTO '||v_dest_table||'('||v_cols||', mimeo_source_deleted) SELECT '||v_cols||', mimeo_source_deleted FROM '||v_tmp_table||'_deleted'; 
PERFORM gdb(p_debug,v_insert_deleted_sql);
EXECUTE v_insert_deleted_sql;
GET DIAGNOSTICS v_rowcount = ROW_COUNT;
PERFORM gdb(p_debug,'Deleted rows inserted: '||v_rowcount::text);
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Inserted '||v_rowcount||' records');
END IF;
IF (v_total + v_rowcount) > (v_limit * .75) THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Row count warning');
        PERFORM update_step(v_step_id, 'WARNING','Row count fetched ('||v_total||') greater than 75% of batch limit ('||v_limit||'). Recommend increasing batch limit if possible.');
    END IF;
    v_batch_limit_reached := true;
END IF;

-- clean out rows from txn table
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Cleaning out rows from txn table');
END IF;
v_trigger_delete := 'SELECT dblink_exec('||quote_literal(v_dblink_name)||','||quote_literal('DELETE FROM '||v_control||' WHERE processed = true')||')'; 
PERFORM gdb(p_debug,v_trigger_delete);
EXECUTE v_trigger_delete INTO v_exec_status;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Result was '||v_exec_status);
END IF;

-- update activity status
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run in config table');
END IF;
UPDATE refresh_config_logdel SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination; 
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Last Value was '||current_timestamp);
END IF;

PERFORM dblink_disconnect(v_dblink_name);

EXECUTE 'DROP TABLE IF EXISTS '||v_tmp_table||'_full';
EXECUTE 'DROP TABLE IF EXISTS '||v_tmp_table||'_queue';
EXECUTE 'DROP TABLE IF EXISTS '||v_tmp_table||'_deleted';

IF v_jobmon THEN
    IF v_batch_limit_reached = false THEN
        PERFORM close_job(v_job_id);
    ELSE
        -- Set final job status to level 2 (WARNING) to bring notice that the batch limit was reached and may need adjusting.
        -- Preventive warning to keep replication from falling behind.
        PERFORM fail_job(v_job_id, 2);
    END IF;
END IF;
-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Log Del: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
                  EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||coalesce(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;


/*
 *  Snap refresh to repull all table data
 */
CREATE OR REPLACE FUNCTION refresh_snap(p_destination text, p_index boolean DEFAULT true, p_pulldata boolean DEFAULT true, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql SECURITY DEFINER
    AS $$
DECLARE

v_adv_lock          boolean; 
v_cols_n_types      text[];
v_cols              text[];
v_condition         text;
v_create_sql        text;
v_dblink            int;
v_dblink_name       text;
v_dblink_schema     text;
v_dest_table        text;
v_exists            int;
v_fetch_sql         text;
v_filter            text[];
v_insert_sql        text;
v_job_id            int;
v_jobmon            boolean;
v_jobmon_schema     text;
v_job_name          text;
v_lcols_array       text[];
v_link_exists       boolean;
v_local_sql         text;
v_l                 text;
v_match             boolean = true;
v_old_grant         record;
v_old_owner         text;
v_old_search_path   text;
v_old_snap          text;
v_old_snap_table    text;
v_parts             record;
v_post_script       text[];
v_refresh_snap      text;
v_remote_index_sql  text;
v_remote_sql        text;
v_row               record;
v_rowcount          bigint;
v_r                 text;
v_snap              text;
v_source_table      text;
v_step_id           int;
v_table_exists      boolean;
v_total             bigint := 0;
v_tup_del           bigint;
v_tup_ins           bigint;
v_tup_upd           bigint;
v_tup_del_new       bigint;
v_tup_ins_new       bigint;
v_tup_upd_new       bigint;
v_view_definition   text;

BEGIN

IF p_debug IS DISTINCT FROM true THEN
    PERFORM set_config( 'client_min_messages', 'notice', true );
END IF;

v_job_name := 'Refresh Snap: '||p_destination;
v_dblink_name := @extschema@.check_name_length('mimeo_snap_refresh_'||p_destination);

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

-- Set custom search path to allow easier calls to other functions, especially job logging
SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , filter
    , condition
    , n_tup_ins
    , n_tup_upd
    , n_tup_del
    , post_script 
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_filter
    , v_condition
    , v_tup_ins
    , v_tup_upd
    , v_tup_del
    , v_post_script 
    , v_jobmon
FROM refresh_config_snap
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for %',v_job_name; 
END IF;  

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

-- Take advisory lock to prevent multiple calls to function overlapping and causing possible deadlock
v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_snap'), hashtext(v_job_name));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    PERFORM gdb(p_debug,'Obtaining advisory lock FAILED for job: '||v_job_name);
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
    v_step_id := add_step(v_job_id,'Grabbing Mapping, Building SQL');
END IF;

-- checking for current view
SELECT definition INTO v_view_definition FROM pg_views where
      ((schemaname || '.') || viewname)=v_dest_table;

PERFORM dblink_connect(v_dblink_name, @extschema@.auth(v_dblink));

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
    v_step_id := add_step(v_job_id,'Truncate non-active snap table');
END IF;

v_exists := strpos(v_view_definition, 'snap1');
  IF v_exists > 0 THEN
    v_snap := 'snap2';
    v_old_snap := 'snap1';
    ELSE
    v_snap := 'snap1';
    v_old_snap := 'snap2';
 END IF;
v_refresh_snap := v_dest_table||'_'||v_snap;
v_old_snap_table := v_dest_table||'_'||v_old_snap;
PERFORM gdb(p_debug,'v_refresh_snap: '||v_refresh_snap::text);

-- Create snap table if it doesn't exist
PERFORM gdb(p_debug, 'Getting table columns and creating destination table if it doesn''t exist');
SELECT p_table_exists, p_cols, p_cols_n_types FROM manage_dest_table(v_dest_table, v_snap, p_debug) INTO v_table_exists, v_cols, v_cols_n_types;
IF v_table_exists THEN 
/* Check local column definitions against remote and recreate table if different. Allows automatic recreation of
        snap tables if columns change (add, drop type change)  */  
    v_local_sql := 'SELECT array_agg(attname||'' ''||format_type(atttypid, atttypmod)::text) as cols_n_types FROM pg_attribute WHERE attnum > 0 AND attisdropped is false AND attrelid = ' || quote_literal(v_refresh_snap) || '::regclass'; 
    PERFORM gdb(p_debug, v_local_sql);

    EXECUTE v_local_sql INTO v_lcols_array;
    -- Check to see if there's a change in the column structure on the remote
    FOREACH v_r IN ARRAY v_cols_n_types LOOP
        v_match := false;
        FOREACH v_l IN ARRAY v_lcols_array LOOP
            IF v_r = v_l THEN
                v_match := true;
                EXIT;
            END IF;
        END LOOP;
    END LOOP;

    IF v_match = false THEN
        -- Grab old table & view privileges. They are applied later after the view is recreated/swapped
        CREATE TEMP TABLE mimeo_snapshot_grants_tmp (statement text);
        FOR v_old_grant IN 
            SELECT table_schema ||'.'|| table_name AS tablename
                , array_agg(privilege_type::text) AS types
                , grantee
            FROM information_schema.table_privileges 
            WHERE table_schema ||'.'|| table_name IN (v_refresh_snap, v_dest_table)
            GROUP BY grantee, table_schema, table_name 
        LOOP
            INSERT INTO mimeo_snapshot_grants_tmp VALUES ( 
                'GRANT '||array_to_string(v_old_grant.types, ',')||' ON '||v_old_grant.tablename||' TO '||v_old_grant.grantee
            );
        END LOOP;
        SELECT viewowner INTO v_old_owner FROM pg_views WHERE schemaname ||'.'|| viewname = v_dest_table;

        EXECUTE 'DROP TABLE ' || v_refresh_snap;
        EXECUTE 'DROP VIEW ' || v_dest_table;
        PERFORM manage_dest_table(v_dest_table, v_snap, p_debug);

        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Source table structure changed.');
            PERFORM update_step(v_step_id, 'OK','Tables and view dropped and recreated. Please double-check snap table attributes (permissions, indexes, etc');
        END IF;
        PERFORM gdb(p_debug,'Source table structure changed. Tables and view dropped and recreated. Please double-check snap table attributes (permissions, indexes, etc)');
    END IF;
    -- truncate non-active snap table
    EXECUTE 'TRUNCATE TABLE ' || v_refresh_snap;

    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;
END IF;

-- Only check the remote data if there have been no column changes and snap table actually exists. 
-- Otherwise maker functions won't work if source is empty & view switch won't happen properly.
IF  v_table_exists AND v_match THEN
    v_remote_sql := 'SELECT n_tup_ins, n_tup_upd, n_tup_del FROM pg_catalog.pg_stat_all_tables WHERE relid::regclass = '||quote_literal(v_source_table)||'::regclass';
    v_remote_sql := 'SELECT n_tup_ins, n_tup_upd, n_tup_del FROM dblink('||quote_literal(v_dblink_name)||', ' || quote_literal(v_remote_sql) || ') t (n_tup_ins bigint, n_tup_upd bigint, n_tup_del bigint)';
    perform gdb(p_debug,'v_remote_sql: '||v_remote_sql);
    EXECUTE v_remote_sql INTO v_tup_ins_new, v_tup_upd_new, v_tup_del_new;
    IF v_tup_ins_new = v_tup_ins AND v_tup_upd_new = v_tup_upd AND v_tup_del_new = v_tup_del THEN
        PERFORM gdb(p_debug,'Remote table has not had any writes. Skipping data pull');
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK', 'Remote table has not had any writes. Skipping data pull');
        END IF;
        UPDATE refresh_config_snap SET last_run = CURRENT_TIMESTAMP WHERE dest_table = p_destination;  
        PERFORM dblink_disconnect(v_dblink_name);
        IF v_jobmon THEN
            PERFORM close_job(v_job_id);
        END IF;
        EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
        RETURN;
    END IF;
END IF;

v_remote_sql := 'SELECT '|| array_to_string(v_cols, ',') ||' FROM '||v_source_table;
-- Used by p_pulldata parameter in maker function
IF p_pulldata = false THEN
    v_remote_sql := v_remote_sql || ' LIMIT 0';
ELSIF v_condition IS NOT NULL THEN
    v_remote_sql := v_remote_sql || ' ' || v_condition;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Inserting records into local table');
END IF;
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);

v_rowcount := 0;
LOOP
    v_fetch_sql := 'INSERT INTO '|| v_refresh_snap ||' ('|| array_to_string(v_cols, ',') ||') 
        SELECT '||array_to_string(v_cols, ',')||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||array_to_string(v_cols_n_types, ',')||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    EXIT WHEN v_rowcount = 0;
    v_total := v_total + coalesce(v_rowcount, 0);
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' rows');
END IF;

-- Create indexes if new table was created
IF (v_table_exists = false OR v_match = 'f') AND p_index = true THEN
    PERFORM gdb(p_debug, 'Creating indexes');
    PERFORM create_index(v_dest_table, v_snap, p_debug);
END IF;

EXECUTE 'ANALYZE ' ||v_refresh_snap;

-- swap view
IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Swap view to '||v_refresh_snap);
END IF;
PERFORM gdb(p_debug,'Swapping view to '||v_refresh_snap);
EXECUTE 'CREATE OR REPLACE VIEW '||v_dest_table||' AS SELECT * FROM '||v_refresh_snap;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','View Swapped');
END IF;

IF v_match = false THEN
    -- Actually apply the original privileges if the table was recreated
    FOR v_old_grant IN SELECT statement FROM mimeo_snapshot_grants_tmp
    LOOP
        EXECUTE v_old_grant.statement;
    END LOOP;
    DROP TABLE IF EXISTS mimeo_snapshot_grants_tmp;
    EXECUTE 'ALTER VIEW '||v_dest_table||' OWNER TO '||v_old_owner;
    EXECUTE 'ALTER TABLE '||v_refresh_snap||' OWNER TO '||v_old_owner;

    -- Run any special sql to fix anything that was done to destination tables (extra indexes, etc)
    IF v_post_script IS NOT NULL THEN
        IF v_jobmon THEN
            v_step_id := add_step(v_job_id,'Applying post_script sql commands due to schema change');
        END IF;
        PERFORM @extschema@.post_script(v_dest_table);
        IF v_jobmon THEN
            PERFORM update_step(v_step_id, 'OK','Done');
        END IF;
    END IF;
END IF;

SELECT 
    CASE    
        WHEN count(1) > 0 THEN true
        ELSE false 
    END
INTO v_table_exists FROM pg_tables WHERE schemaname ||'.'|| tablename = v_old_snap_table;
IF v_table_exists THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id,'Truncating old snap table');
    END IF;
    EXECUTE 'TRUNCATE TABLE '||v_old_snap_table;
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK','Done');
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run & tuple change values');
END IF;
UPDATE refresh_config_snap SET 
    last_run = CURRENT_TIMESTAMP 
    , n_tup_ins = v_tup_ins_new   
    , n_tup_upd = v_tup_upd_new
    , n_tup_del = v_tup_del_new
WHERE dest_table = p_destination;  
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Done');
END IF;

PERFORM dblink_disconnect(v_dblink_name);

IF v_jobmon THEN
    PERFORM close_job(v_job_id);
END IF;

-- Ensure old search path is reset for the current session
EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;   
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh Snap: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||COALESCE(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;


/*
 *  Plain table refresh function. 
 */
CREATE OR REPLACE FUNCTION refresh_table(p_destination text, p_truncate_cascade boolean DEFAULT NULL, p_jobmon boolean DEFAULT NULL, p_debug boolean DEFAULT false) RETURNS void
    LANGUAGE plpgsql
    AS $$
DECLARE

v_adv_lock              boolean;
v_cols                  text;
v_cols_n_types          text;
v_condition             text;
v_dblink                int;
v_dblink_name           text;
v_dblink_schema         text;
v_dest_table            text;
v_fetch_sql             text;
v_filter                text[];
v_job_id                bigint;
v_job_name              text;
v_jobmon                boolean;
v_jobmon_schema         text;
v_link_exists           boolean;
v_old_search_path       text;
v_post_script           text[];
v_remote_sql            text;
v_rowcount              bigint := 0;
v_seq                   text;
v_seq_max               bigint;
v_sequences             text[];
v_source_table          text;
v_step_id               bigint;
v_total                 bigint := 0;
v_truncate_cascade      boolean;
v_truncate_sql          text;

BEGIN

SELECT nspname INTO v_dblink_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'dblink' AND e.extnamespace = n.oid;
SELECT nspname INTO v_jobmon_schema FROM pg_namespace n, pg_extension e WHERE e.extname = 'pg_jobmon' AND e.extnamespace = n.oid;
IF p_jobmon IS TRUE AND v_jobmon_schema IS NULL THEN
    RAISE EXCEPTION 'p_jobmon parameter set to TRUE, but unable to determine if pg_jobmon extension is installed';
END IF;

v_dblink_name := @extschema@.check_name_length('mimeo_table_refresh_'||p_destination);
v_job_name := 'Refresh Table: '||p_destination;

SELECT current_setting('search_path') INTO v_old_search_path;
EXECUTE 'SELECT set_config(''search_path'',''@extschema@,'||COALESCE(v_jobmon_schema||',', '')||v_dblink_schema||',public'',''false'')';

SELECT source_table
    , dest_table
    , dblink
    , filter
    , condition
    , sequences
    , truncate_cascade
    , jobmon
INTO v_source_table
    , v_dest_table
    , v_dblink
    , v_filter
    , v_condition
    , v_sequences
    , v_truncate_cascade
    , v_jobmon
FROM refresh_config_table
WHERE dest_table = p_destination; 
IF NOT FOUND THEN
   RAISE EXCEPTION 'No configuration found for Refresh Table: %',p_destination; 
END IF;

-- Allow override with parameter
v_jobmon := COALESCE(p_jobmon, v_jobmon);

v_adv_lock := pg_try_advisory_xact_lock(hashtext('refresh_table'), hashtext(p_destination));
IF v_adv_lock = 'false' THEN
    IF v_jobmon THEN
        v_job_id := add_job(v_job_name);
        v_step_id := add_step(v_job_id,'Obtaining advisory lock for job: '||v_job_name);
        PERFORM update_step(v_step_id, 'WARNING','Found concurrent job. Exiting gracefully');
        PERFORM fail_job(v_job_id, 2);
    END IF;
    RAISE NOTICE 'Found concurrent job. Exiting gracefully';
    EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';
    RETURN;
END IF;

IF v_jobmon THEN
    v_job_id := add_job(v_job_name);
    PERFORM gdb(p_debug,'Job ID: '||v_job_id::text);
END IF;

IF p_truncate_cascade IS NOT NULL THEN
    v_truncate_cascade := p_truncate_cascade;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id, 'Truncating destination table');
END IF;
v_truncate_sql := 'TRUNCATE TABLE '||v_dest_table;
IF v_truncate_cascade THEN
    v_truncate_sql := v_truncate_sql || ' CASCADE';
    RAISE NOTICE 'WARNING! If this table had foreign keys, you have just truncated all referencing tables as well!';
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK', 'If this table had foreign keys, you have just truncated all referencing tables as well!');
    END IF;
ELSE
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK', 'Done');
    END IF;
END IF;
EXECUTE v_truncate_sql;

PERFORM dblink_connect(v_dblink_name, @extschema@.auth(v_dblink));

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Grabbing Mapping, Building SQL');
END IF;

IF v_filter IS NULL THEN 
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND attnum > 0 AND attisdropped is false;
ELSE
    SELECT array_to_string(array_agg(attname),','), array_to_string(array_agg(attname||' '||format_type(atttypid, atttypmod)::text),',') 
        INTO v_cols, v_cols_n_types
        FROM pg_attribute WHERE attrelid = p_destination::regclass AND ARRAY[attname::text] <@ v_filter AND attnum > 0 AND attisdropped is false;
END IF;

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK', 'Done');
    v_step_id := add_step(v_job_id,'Inserting records into local table');
END IF;

v_remote_sql := 'SELECT '||v_cols||' FROM '||v_source_table;
IF v_condition IS NOT NULL THEN
    v_remote_sql := v_remote_sql || ' ' || v_condition;
END IF;  
PERFORM dblink_open(v_dblink_name, 'mimeo_cursor', v_remote_sql);
v_rowcount := 0;
LOOP
    v_fetch_sql := 'INSERT INTO '|| v_dest_table ||' ('||v_cols||') 
        SELECT '||v_cols||' FROM dblink_fetch('||quote_literal(v_dblink_name)||', ''mimeo_cursor'', 50000) AS ('||v_cols_n_types||')';
    EXECUTE v_fetch_sql;
    GET DIAGNOSTICS v_rowcount = ROW_COUNT;
    EXIT WHEN v_rowcount = 0;
    v_total := v_total + coalesce(v_rowcount, 0);
    PERFORM gdb(p_debug,'Fetching rows in batches: '||v_total||' done so far.');
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'PENDING', 'Fetching rows in batches: '||v_total||' done so far.');
    END IF;
END LOOP;
PERFORM dblink_close(v_dblink_name, 'mimeo_cursor');

IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Inserted '||v_total||' rows');
END IF;

PERFORM dblink_disconnect(v_dblink_name);

-- Reset any sequences given in the parameter to their new value. 
-- Checks all tables that use the given sequence to ensure it's the max for the entire database.
IF v_sequences IS NOT NULL THEN
    IF v_jobmon THEN
        v_step_id := add_step(v_job_id, 'Resetting sequences');
    END IF;
    FOREACH v_seq IN ARRAY v_sequences LOOP
        SELECT sequence_max_value(c.oid) INTO v_seq_max FROM pg_class c JOIN pg_namespace n ON c.relnamespace = n.oid WHERE n.nspname ||'.'|| c.relname = v_seq;
        IF v_seq_max IS NOT NULL THEN
            PERFORM setval(v_seq, v_seq_max);
        END IF;
    END LOOP;
    IF v_jobmon THEN
        PERFORM update_step(v_step_id, 'OK', 'Done');
    END IF;
END IF;

IF v_jobmon THEN
    v_step_id := add_step(v_job_id,'Updating last_run in config table');
END IF;
UPDATE refresh_config_table set last_run = CURRENT_TIMESTAMP WHERE dest_table = v_dest_table;
IF v_jobmon THEN
    PERFORM update_step(v_step_id, 'OK','Last run was '||CURRENT_TIMESTAMP);
END IF;

IF v_jobmon THEN
    PERFORM close_job(v_job_id);
END IF;

EXECUTE 'SELECT set_config(''search_path'','''||v_old_search_path||''',''false'')';

EXCEPTION
    WHEN QUERY_CANCELED THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;  
    WHEN OTHERS THEN
        EXECUTE 'SELECT '||v_dblink_schema||'.dblink_get_connections() @> ARRAY['||quote_literal(v_dblink_name)||']' INTO v_link_exists;
        IF v_link_exists THEN
            EXECUTE 'SELECT '||v_dblink_schema||'.dblink_disconnect('||quote_literal(v_dblink_name)||')';
        END IF;
        IF v_jobmon THEN
            IF v_job_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_job(''Refresh DML: '||p_destination||''')' INTO v_job_id;
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before job logging started'')' INTO v_step_id;
            END IF;
            IF v_step_id IS NULL THEN
                EXECUTE 'SELECT '||v_jobmon_schema||'.add_step('||v_job_id||', ''EXCEPTION before first step logged'')' INTO v_step_id;
            END IF;
            EXECUTE 'SELECT '||v_jobmon_schema||'.update_step('||v_step_id||', ''CRITICAL'', ''ERROR: '||coalesce(SQLERRM,'unknown')||''')';
            EXECUTE 'SELECT '||v_jobmon_schema||'.fail_job('||v_job_id||')';
        END IF;
        RAISE EXCEPTION '%', SQLERRM;
END
$$;

-- Restore dropped object privileges
DO $$
DECLARE
v_row   record;
BEGIN
    FOR v_row IN SELECT statement FROM mimeo_preserve_privs_temp LOOP
        IF v_row.statement IS NOT NULL THEN
            EXECUTE v_row.statement;
        END IF;
    END LOOP;
END
$$;

DROP TABLE mimeo_preserve_privs_temp;