pkg-kde-tools 0.15.20~ubuntu4 / usr / bin / dh_sameversiondep

#!/usr/bin/perl -w

# Copyright (C) 2010 Modestas Vainius <modax@debian.org>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>

=head1 NAME

dh_sameversiondep - generate versioned dependency based on the versioned
dependencies of the reference package.

=head1 SYNOPSIS

B<dh_sameversiondep> [S<I<debhelper options>>]

=head1 DESCRIPTION

B<dh_sameversiondep> is a helper tool which is able to generate a dependency
that is versioned the same way as a dependency (coming from the same source) of
another reference package.  B<dh_sameversiondep> scans debian/control for the
specially formatted substvar (see L</sameVersionDep substvar SPECIFICATION>
section below), determines its value and writes it to
F<debian/package.substvars> file.

The most common use case for B<dh_sameversiondep> tool is to keep your
I<liba-dev> package dependency on the external I<libb-dev> package as tight as
your I<liba> package depends on the respective external I<libb> package (see
L</EXAMPLE> section for more information about this use case).

B<dh_sameversiondep> works as follows:

=over 4

=item *

Searches for the B<sameVersionDep> substvar in the Depends, Recommends,
Suggests, Enhances and Pre-Depends fields of the requested packages. When one
is found, it is parsed and the I<dependency package> name, I<reference package>
name and I<dependency type> (either Depends or Recommends etc.) are determined.

=item *

All dependencies of the requested I<type> are collected for the I<dependency
package> based on the I<dpkg-query --status> output. If a multi-arch aware dpkg
is detected, this query is architecture-qualified as needed.

=item *

All dependencies of the requested I<type> are collected for the I<reference
package> either from F<debian/control> (substvars are expanded) or from
I<dpkg-query --status> output if the package was not found in
F<debian/control>.

=item *

Both collections are intersected leaving only common packages in both
collections.

=item *

Common package list is filtered by leaving only those which come from the same
source as I<dependency package>.

=item *

Whatever packages are left (most likely only one), their names are replaced
with I<dependency package> name preserving all versioning information. This
result is written to F<debian/package.substvars> file as a value of the
B<sameVersionDep> substvar being processed.

=back

B<dh_sameversiondep> is very strict about errors. If either I<dependency
package> or the I<reference package> cannot be found or the resulting
dependency set is empty, it will fail with an error.

B<dh_sameversiondep> MUST be run before L<dh_gencontrol>. However, it is
recommended to run B<dh_sameversiondep> after L<dh_shlibdeps>.

=head1 sameVersionDep substvar SPECIFICATION

B<sameVersionDep> substvar can appear in either Depends, Recommends, Suggests,
Enhances or Pre-Depends field of any binary package. The field, which the
substvar appears in, becomes the default I<dependency type> for that substvar.
B<sameVersionDep> should be formatted as follows (everything is case sensitive):

S<< ${B<sameVersionDep>:I<dependency>[[:I<reference>]-I<dependency type>]} >>

=over 4

=item I<dependency> (mandatory)

The name of the package which you want to add as a dependency.

=item I<reference> (optional)

The name of the package which dependencies are to be intersected with the
dependencies of the I<dependency> package. Defaults to the first package in
debian/control if ommited.

=item I<dependency type> (optional)

Can be either Depends, Recommends, Suggests, Enhances or Pre-Depends. Defaults
to the name of the field which the substvar was found in. Specifies which type
of dependencies to consider when analyzing I<dependency> package and
I<reference> package.

=back

=head1 EXAMPLE

Assume we have the following in F<debian/control>:

    Package: liba
    Depends: libc (>= 0.1), depa, depb, depc

    Package: libb
    Depends: libd (>= 0.2), depd, depe, depf

    Package: libab-dev
    Depends: ${sameVersionDep:libc-dev}, ${sameVersionDep:libd-dev:libb}

Assumming that libc and libc-dev (both from the same source), as well as libd
and libd-dev (both from the same source) are installed, the value of
C<sameVersionDep:libc-dev> will be I<< libc-dev (>= 0.1) >> and the value of
C<sameVersionDep:libd-dev:libb> will be I<< libd-dev (>= 0.2) >>.

C<sameVersionDep:libc-dev> could also be written as
C<sameVersionDep:libc-dev:liba-Depends> and C<sameVersionDep:libd-dev:libb> as
C<sameVersionDep:libd-dev:libb-Depends> but it is not necessary because
defaults are sufficient.

=head1 SEE ALSO

L<debhelper(7)>

=head1 AUTHOR

Modestas Vainius <modax@debian.org>

=cut

use strict;
use warnings;

use Dpkg::Control::Info;
use Dpkg::Substvars;
use Dpkg::ErrorHandling ();
use File::Copy;
use POSIX ":sys_wait_h";

use Debian::Debhelper::Dh_Lib;

my $namespace = "sameVersionDep";
my @fields = qw(Depends Recommends Suggests Enhances Pre-Depends);
my $re_fields = join("|", @fields);
my $re_pkgname = qr/[a-z0-9][a-z0-9+.-]*/;
my $re_oursubstvar = qr/\$\{($namespace:(.*?))\}/;
my $re_splitsubstvar = qr/^($re_pkgname)(?::($re_pkgname))?(?:-($re_fields))?$/;

# Global substvars file
my $g_substvars = new Dpkg::Substvars;
$g_substvars->load("debian/substvars") if (-r "debian/substvars");

my $MULTIARCH_ARCH;

sub extract_package_names {
    my $val = shift;
    $val =~ s/\([^)]+\)//g;
    $val =~ s/^\s+//;
    $val =~ s/\s+$//;
    return split(/\s*,\s*/, $val);
}

sub extract_deps {
    my ($val, $deppkg) = @_;

    # Extract dependency fields we need
    my @matched_deps;
    for my $dep (split(/\s*,\s*/, $val)) {
        if ($dep =~ /^\Q$deppkg\E(?:$|[\W])/) {
            push @matched_deps, $dep;
        }
    }
    return @matched_deps;
}

sub Shlibsvars::new {
    my ($cls, $package, $control, $substvars_file) = @_;
    my $self = bless ( {
        "package" => $package,
        "control" => $control,
        "file" => $substvars_file,
        }, $cls);
    $self->{substvars} = new Dpkg::Substvars;
    if (-r $self->{file}) {
        $self->{substvars}->load($self->{file});
    }
    return $self;
}

sub Shlibsvars::get_fieldval {
    my ($self, $field) = @_;

    my $pkg = $self->{control}->get_pkg_by_name($self->{package});
    return undef if (!defined $pkg || !exists $pkg->{$field});

    # Turn of warnings for substvars runs
    Dpkg::ErrorHandling::report_options(quiet_warnings => 1);

    my $val = $pkg->{$field};
    $val = $self->{substvars}->substvars($val);
    $val = $g_substvars->substvars($val);

    Dpkg::ErrorHandling::report_options(quiet_warnings => 0);
    return $val;
}

sub Shlibsvars::extract_deps {
    my ($self, $field, $deppkg) = @_;

    my $val = $self->get_fieldval($field);
    return undef() unless defined $val;
    return extract_deps($val, $deppkg);
}

sub Shlibsvars::get_dep_package_names {
    my ($self, $field) = @_;

    my $val = $self->get_fieldval($field);
    return undef() unless defined $val;
    return extract_package_names($val);
}

sub supports_multiarch {
    if (!defined $MULTIARCH_ARCH) {
        my $multiarch_assert = system('dpkg', '--assert-multi-arch');
        if ($multiarch_assert == 0) {
            $MULTIARCH_ARCH = dpkg_architecture_value('DEB_HOST_ARCH');
        } else {
            $MULTIARCH_ARCH = ""; # empty indicates no multiarch support
        }
    }
    return $MULTIARCH_ARCH ne "";
}

sub arch_qualify {
    if (supports_multiarch()) {
        return map { "$_:$MULTIARCH_ARCH" } @_;
    } else {
        return @_;
    }
}

sub execute_dpkg_status {
    my $binpkgs = shift;
    my $fields = shift;
    $fields = [ "Source", "Version" ] unless defined $fields;
    my $status = shift;

    my $regexp_fields = join("|", @$fields);

    my $pid = open(DPKG, "-|");
    error("cannot fork for dpkg-query --status") unless defined($pid);
    if (!$pid) {
        # Child process running dpkg-query --status and discarding errors
        close STDERR;
        open STDERR, ">", "/dev/null";
        $ENV{LC_ALL} = "C";
        exec("dpkg-query", "--status", "--", @$binpkgs) or error("cannot exec dpkg-query");
    }
    my $curpkg;
    while (defined($_ = <DPKG>)) {
        if (m/^Package:\s*(.*)$/) {
            $curpkg = $1;
            $status->{$curpkg} = {};
        } elsif (defined($curpkg)) {
            if (m/^($regexp_fields):\s*(.*)$/) {
                my $field = $1;
                error("dublicate field $field for the $curpkg package in the dpkg status file")
                    if (exists $status->{$curpkg}{$field});
                $status->{$curpkg}{$field} = $2;
            }
        }
    }
    close(DPKG);

    my $exit_code = $?;
    if (WIFEXITED($exit_code)) {
        return WEXITSTATUS($exit_code);
    } else {
        error("failed to terminate dpkg --status process PID $pid");
    }
}

sub get_package_dpkg_status {
    my $binpkgs = shift;
    my $fields = shift;
    my %status;

    my $exit_code = execute_dpkg_status($binpkgs, $fields, \%status);
    if ($exit_code == 2 && supports_multiarch()) {
        # Most likely dpkg-query --status failed due to some of package names
        # being ambiguous on this system. So just requery them using
        # arch-qualified syntax.
        # NOTE: we have to query twice since arch-qualified syntax won't find
        # arch:all packages.
        my @ambiguous_pkgs = arch_qualify(grep { ! exists $status{$_} } @$binpkgs);
        if (@ambiguous_pkgs) {
            execute_dpkg_status(\@ambiguous_pkgs, $fields, \%status);
        }
    }
    return \%status;
}

sub write_substvar($$$$) {
    my ($pkgname, $varname, $value, $substvars) = @_;
    my @contents;
    my $varset = 0;

    my $file = (-r $substvars) ? $substvars : "debian/substvars";
    if (-r $file) {
        open(FILE, "<$file") or die "Unable to open substvars file '$file' for reading\n";
        while (<FILE>) {
            if (!$varset && /^\s*\Q$varname=\E/) {
                push @contents, "$varname=$value\n";
                $varset = 1;
            } else {
                push @contents, $_;
            }
        }
        close(FILE);
    } else {
        # Fallback to default
        $file = $substvars;
    }

    open(FILE, ">$file.tmp") or die "Unable to open substvars file '$file.tmp' for writing\n";
    for (@contents) {
        print FILE $_;
    }
    if (!$varset) {
        print FILE "$varname=$value", "\n";
    }
    close(FILE);

    File::Copy::move("$file.tmp", "$file");
}

init();

my $control = Dpkg::Control::Info->new();
my %shlibsvars;

foreach my $package (@{$dh{DOPACKAGES}}) {
    my $pkg_substvars = sprintf("debian/%ssubstvars", pkgext($package));
    my $pkg = $control->get_pkg_by_name($package);

    for my $fieldname (@fields) {
        if (exists $pkg->{$fieldname}) {
            my $fieldval = $pkg->{$fieldname};
            my $pkgname = $pkg->{Package};

            while ($fieldval =~ m/\G.*?$re_oursubstvar/gs) {
                my $varname = $1;
                my $varparams = $2;
                if ($varparams =~ m/$re_splitsubstvar/) {
                    my $dep2add = $1;

                    # Scan package default to MAINPACKAGE.
                    my $refpkg = $2;
                    $refpkg = $dh{MAINPACKAGE} unless defined $refpkg;

                    my $deptype = $3;
                    $deptype = $fieldname unless defined $deptype;

                    # Initialize some dep2add and refpkg data.
                    # refpkg might also come from external source. Use dpkg-query
                    # to get its dpkg status then.
                    my $refpkg_status;
                    my $dep2add_status;
                    my $vars;
                    if ($control->get_pkg_by_name($refpkg)) {
                        if (!exists $shlibsvars{$refpkg}) {
                            my $refpkg_substvars = sprintf("debian/%ssubstvars", pkgext($refpkg));
                            $shlibsvars{$refpkg} = new Shlibsvars($refpkg, $control, $refpkg_substvars);
                        }
                        $vars = $shlibsvars{$refpkg};

                        $dep2add_status = get_package_dpkg_status( [ $dep2add ], [ "Source", "Version", $deptype ] );
                    } else {
                        my $status = get_package_dpkg_status( [ $refpkg, $dep2add ], [ "Source", "Version", $deptype ] );
                        error("cannot continue because the reference package $refpkg could not be found in debian/control or dpkg status")
                            unless (exists $status->{$refpkg});
                        error("cannot continue because package $refpkg has no $deptype field to scan")
                            unless (exists $status->{$refpkg}{$deptype});
                        $refpkg_status = $status->{$refpkg};

                        $dep2add_status = $status; # see code below
                    }

                    ##### Process and verify dep2add status #####
                    error("cannot continue because package $dep2add could not be found in dpkg status")
                        unless (exists $dep2add_status->{$dep2add});
                    $dep2add_status = $dep2add_status->{$dep2add};

                    # If the source is named the same as the binary package, there
                    # will be no Source field. Use package name as Source then.
                    $dep2add_status->{Source} = $dep2add
                        unless ($dep2add_status->{Source});

                    # Check validility of dep2add status
                    error("could not retreive source package name for $dep2add package. Is it installed?")
                        unless exists $dep2add_status->{Source} && exists $dep2add_status->{Version};
                    error("package $dep2add has no $deptype field. This configuration is unsupported. ")
                        unless exists $dep2add_status->{$deptype};
                    my @dep2add_deps = extract_package_names($dep2add_status->{$deptype});

                    # Get deptype packages of refpkg
                    my @refpkg_deps;
                    if ($vars) {
                        @refpkg_deps = $vars->get_dep_package_names($deptype);
                    } else {
                        @refpkg_deps = extract_package_names($refpkg_status->{$deptype});
                    }
                    error("cannot continue because package $refpkg has no $deptype field to scan")
                        unless (@refpkg_deps);

                    # Intersect both _deps arrays to find common dependencies
                    my @commondeps;
                    {
                        my %_map;
                        map { $_map{$_} = 1; } @refpkg_deps;
                        map { push @commondeps, $_ if exists $_map{$_} } @dep2add_deps;
                    }

                    # Get status information about common packages. They need to come from the
                    # same source package as dep2add package and their versions should match
                    my $depstatus = get_package_dpkg_status(\@commondeps, [ "Source", "Version" ]);

                    # Check if all packages were found
                    for my $dep (@commondeps) {
                        error("package $dep was not found in the dpkg status. Internal error")
                            unless exists $depstatus->{$dep};
                    }

                    # Filter commondeps
                    @commondeps = ();
                    while (my ($pkg, $status) = each(%$depstatus)) {
                        # If the source is named the same as the binary package, there
                        # will be no Source field. Use package name as Source then.
                        $status->{Source} = $pkg unless ($status->{Source});

                        push @commondeps, $pkg
                            if (exists $status->{Source} && exists $status->{Version} &&
                                ($status->{Source} eq $dep2add_status->{Source}) && 
                                ($status->{Version} eq $dep2add_status->{Version}));
                    }

                    # Ideally we should have got the list down to one. if not, combine
                    # version relationships
                    my @fulldeps;
                    if (!@commondeps) {
                        error("$0: no same version dependencies for '$varname' found (at $fieldname of the $package package)");
                    } else {
                        my $refpkg_deptypeval = ($vars) ? $vars->get_fieldval($deptype) :
                                                           $refpkg_status->{$deptype};
                        for my $deppkg (@commondeps) {
                            my @full_dep_spec = extract_deps($refpkg_deptypeval, $deppkg);
                            map s/\b\Q$deppkg\E\b/$dep2add/g, @full_dep_spec;
                            push @fulldeps, @full_dep_spec;
                        }

                        # Drop dupes
                        @fulldeps = sort @fulldeps;
                        my @uniqdeps;
                        my $_prevdep;
                        for my $dep (@fulldeps) {
                            my $tmp = "$dep";
                            $tmp =~ s/\s//g;
                            push @uniqdeps, $dep if (!defined $_prevdep || $_prevdep ne $tmp);
                            $_prevdep = $tmp;
                        }
                        # Write substvar for the package
                        write_substvar($pkgname, $varname, join(", ", @uniqdeps), $pkg_substvars);
                    }
                } else {
                    error("invalid '$namespace' substvar syntax: $varparams");
                }
            }
        }
    }
}

exit 0