/usr/share/pcb/pcblib-newlib/geda/TO126.fp is in pcb-common 20140316-3.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 | Element(0x00 "Transistor" "" "TO126" 80 480 1 100 0x00)
(
# From the JEDEC drawing, the pins are rectangular with dimensions
# 25-35 mil X 15-25 mil
#
# This gives a diagonal dimension of 29.2 to 43.0 mils.
# Pin pitch is 80 to 100 mils.
#
# For a minimum clearance of 10 mils (probably not unreasonable if
# you are doing a design with leaded parts, this gives a max pad size
# of 80 mils. A 52 mil drill will give 14 mil annular ring which should
# be plenty.
#
# The mounting hole is 100 to 130 mils diameter
Pin(110 600 80 52 "1" 0x101)
Pin(200 600 80 52 "2" 0x01)
Pin(290 600 80 52 "3" 0x01)
# Befestigungsbohrung
Pin(200 170 130 110 "4" 0x01)
# Anschlussdraehte
ElementLine(100 600 100 500 30)
ElementLine(200 600 200 500 30)
ElementLine(300 600 300 500 30)
# Gehaeuse
ElementLine( 50 500 350 500 20)
ElementLine(350 500 350 70 20)
ElementLine(350 70 50 70 20)
ElementLine( 50 70 50 500 20)
Mark(100 600)
)
|