/usr/share/openscad/libraries/MCAD/gridbeam.scad is in openscad-mcad 2014.03-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 | /*********************************
* OpenSCAD GridBeam Library *
* (c) Timothy Schmidt 2013 *
* http://www.github.com/gridbeam *
* License: LGPL 2.1 or later *
*********************************/
/* Todo:
- implement "dxf" mode
- implement hole cutout pattern - interference based on hole size, compatible with two sizes above and below the currently set size.
*/
// zBeam(segments) - create a vertical gridbeam strut 'segments' long
// xBeam(segments) - create a horizontal gridbeam strut along the X axis
// yBeam(segments) - create a horizontal gridbeam strut along the Y axis
// zBolt(segments) - create a bolt 'segments' in length
// xBolt(segments)
// yBolt(segments)
// topShelf(width, depth, corners) - create a shelf suitable for use in gridbeam structures width and depth in 'segments', corners == 1 notches corners
// bottomShelf(width, depth, corners) - like topShelf, but aligns shelf to underside of beams
// backBoard(width, height, corners) - create a backing board suitable for use in gridbeam structures width and height in 'segments', corners == 1 notches corners
// frontBoard(width, height, corners) - like backBoard, but aligns board to front side of beams
// translateBeam([x, y, z]) - translate gridbeam struts or shelves in X, Y, or Z axes in units 'segments'
// To render the DXF file from the command line:
// openscad -x connector.dxf -D'mode="dxf"' connector.scad
mode = "model";
//mode = "dxf";
include <units.scad>
beam_width = inch * 1.5;
beam_hole_diameter = inch * 5/16;
beam_hole_radius = beam_hole_diameter / 2;
beam_is_hollow = 1;
beam_wall_thickness = inch * 1/8;
beam_shelf_thickness = inch * 1/4;
module zBeam(segments) {
if (mode == "model") {
difference() {
cube([beam_width, beam_width, beam_width * segments]);
for(i = [0 : segments - 1]) {
translate([beam_width / 2, beam_width + 1, beam_width * i + beam_width / 2])
rotate([90,0,0])
cylinder(r=beam_hole_radius, h=beam_width + 2);
translate([-1, beam_width / 2, beam_width * i + beam_width / 2])
rotate([0,90,0])
cylinder(r=beam_hole_radius, h=beam_width + 2);
}
if (beam_is_hollow == 1) {
translate([beam_wall_thickness, beam_wall_thickness, -1])
cube([beam_width - beam_wall_thickness * 2, beam_width - beam_wall_thickness * 2, beam_width * segments + 2]);
}
}
}
if (mode == "dxf") {
}
}
module xBeam(segments) {
if (mode == "model") {
translate([0,0,beam_width])
rotate([0,90,0])
zBeam(segments);
}
if (mode == "dxf") {
}
}
module yBeam(segments) {
if (mode == "model") {
translate([0,0,beam_width])
rotate([-90,0,0])
zBeam(segments);
}
if (mode == "dxf") {
}
}
module zBolt(segments) {
if (mode == "model") {
}
if (mode == "dxf") {
}
}
module xBolt(segments) {
if (mode == "model") {
}
if (mode == "dxf") {
}
}
module yBolt(segments) {
if (mode == "model") {
}
if (mode == "dxf") {
}
}
module translateBeam(v) {
for (i = [0 : $children - 1]) {
translate(v * beam_width) child(i);
}
}
module topShelf(width, depth, corners) {
if (mode == "model") {
difference() {
cube([width * beam_width, depth * beam_width, beam_shelf_thickness]);
if (corners == 1) {
translate([-1, -1, -1])
cube([beam_width + 2, beam_width + 2, beam_shelf_thickness + 2]);
translate([-1, (depth - 1) * beam_width, -1])
cube([beam_width + 2, beam_width + 2, beam_shelf_thickness + 2]);
translate([(width - 1) * beam_width, -1, -1])
cube([beam_width + 2, beam_width + 2, beam_shelf_thickness + 2]);
translate([(width - 1) * beam_width, (depth - 1) * beam_width, -1])
cube([beam_width + 2, beam_width + 2, beam_shelf_thickness + 2]);
}
}
}
if (mode == "dxf") {
}
}
module bottomShelf(width, depth, corners) {
if (mode == "model") {
translate([0,0,-beam_shelf_thickness])
topShelf(width, depth, corners);
}
if (mode == "dxf") {
}
}
module backBoard(width, height, corners) {
if (mode == "model") {
translate([beam_width, 0, 0])
difference() {
cube([beam_shelf_thickness, width * beam_width, height * beam_width]);
if (corners == 1) {
translate([-1, -1, -1])
cube([beam_shelf_thickness + 2, beam_width + 2, beam_width + 2]);
translate([-1, -1, (height - 1) * beam_width])
cube([beam_shelf_thickness + 2, beam_width + 2, beam_width + 2]);
translate([-1, (width - 1) * beam_width, -1])
cube([beam_shelf_thickness + 2, beam_width + 2, beam_width + 2]);
translate([-1, (width - 1) * beam_width, (height - 1) * beam_width])
cube([beam_shelf_thickness + 2, beam_width + 2, beam_width + 2]);
}
}
}
if (mode == "dxf") {
}
}
module frontBoard(width, height, corners) {
if (mode == "model") {
translate([-beam_width - beam_shelf_thickness, 0, 0])
backBoard(width, height, corners);
}
if (mode == "dxf") {
}
}
|