/usr/share/doc/netwox-doc/tools/69.html is in netwox-doc 5.39.0-1.2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 | <HTML>
<HEAD>
<TITLE>Tool 69: Scan UDP</TITLE>
</HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER> <H3>Tool 69: Scan UDP</H3>
</CENTER>
<P><H3>Description:</H3>
<PRE>
This tool checks if several UDP ports are open on host.
This tool sends an UDP packet to a computer. If host permits UDP, it
will send back an ICMP error (if port is closed), or send back nothing
(if port is open). So, it's important to understand UDP port has to be
closed for computer to return something.
Parameter --spoofip indicates how to generate link layer for spoofing.
Values 'best', 'link' or 'raw' are common choices for --spoofip. Here
is the list of accepted values:
- 'raw' means to spoof at IP4/IP6 level (it uses system IP stack). If
a firewall is installed, or on some systems, this might not work.
- 'linkf' means to spoof at link level (currently, only Ethernet is
supported). The 'f' means to Fill source Ethernet address.
However, if source IP address is spoofed, it might be impossible
to Fill it. So, linkf will not work: use linkb or linkfb instead.
- 'linkb' means to spoof at link level. The 'b' means to left a Blank
source Ethernet address (0:0:0:0:0:0, do not try to Fill it).
- 'linkfb' means to spoof at link level. The 'f' means to try to Fill
source Ethernet address, but if it is not possible, it is left
Blank.
- 'rawlinkf' means to try 'raw', then try 'linkf'
- 'rawlinkb' means to try 'raw', then try 'linkb'
- 'rawlinkfb' means to try 'raw', then try 'linkfb'
- 'linkfraw' means to try 'linkf', then try 'raw'
- 'linkbraw' means to try 'linkb', then try 'raw'
- 'linkfbraw' means to try 'linkfb', then try 'raw'
- 'link' is an alias for 'linkfb'
- 'rawlink' is an alias for 'rawlinkfb'
- 'linkraw' is an alias for 'linkfbraw'
- 'best' is an alias for 'linkraw'. It should work in all cases.
This tool may need to be run with admin privilege in order to sniff
and spoof.
</PRE>
<P><H3>Synonyms:</H3>
nmap<BR>
<P><H3>Usage:</H3>
netwox 69 -i ips -p ports [-s spoofip] [-m uint32] [-M uint32] [-u|+u] [-n uint32]<BR>
<P><H3>Parameters:</H3>
<TABLE BORDER=1 CELLPADDING=4>
<TR>
<TD ALIGN=middle><I>parameter</I></TD>
<TD ALIGN=middle><I>description</I></TD>
<TD ALIGN=middle><I>example</I></TD>
</TR>
<TR><TD><TT>-i|--ips ips</TD>
<TD>list/range of IP addresses</TD>
<TD>1.2.3.4,5.6.7.8</TD></TR>
<TR><TD><TT>-p|--ports ports</TD>
<TD>list/range of port number</TD>
<TD>all</TD></TR>
<TR><TD><TT>-s|--spoofip spoofip</TD>
<TD>IP spoof initialization type</TD>
<TD>best</TD></TR>
<TR><TD><TT>-m|--min-ms uint32</TD>
<TD>min millisecond delay between packets</TD>
<TD>0</TD></TR>
<TR><TD><TT>-M|--max-ms uint32</TD>
<TD>max millisecond wait for answers</TD>
<TD>5000</TD></TR>
<TR><TD><TT>-u|--disp-useful|+u|--no-disp-useful</TD>
<TD>only display useful info</TD>
<TD> </TD></TR>
<TR><TD><TT>-n|--numtargets uint32</TD>
<TD>number of simultaneous targets</TD>
<TD>20 </TD></TR>
</TABLE>
<P><H3>Examples:</H3>
netwox 69 -i "1.2.3.4,5.6.7.8" -p "all"<BR>
<BR>
netwox 69 --ips "1.2.3.4,5.6.7.8" --ports "all"<BR>
<BR>
</BODY>
</HTML>
|