keepalived 1:1.2.19-1 / usr / share / snmp / mibs / KEEPALIVED-MIB

-- ----------------------------------------------------------------------
-- MIB file for keepalived (http://www.keepalived.org)
-- ----------------------------------------------------------------------
--
-- There are two sections in this MIB: vrrp and check.

KEEPALIVED-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-TYPE, MODULE-IDENTITY,
    Integer32, Unsigned32, Counter32, Counter64,
    Gauge32, enterprises, NOTIFICATION-TYPE
        FROM SNMPv2-SMI
    OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
    	FROM SNMPv2-CONF
    InetAddressType, InetAddress, InetPortNumber,
    InetAddressPrefixLength, InetScopeType
        FROM INET-ADDRESS-MIB
    InterfaceIndex, ifIndex
        FROM IF-MIB
    DisplayString, TEXTUAL-CONVENTION, TruthValue
        FROM SNMPv2-TC;

keepalived MODULE-IDENTITY
     LAST-UPDATED "201208240000Z"
     ORGANIZATION "Keepalived"
     CONTACT-INFO "http://www.keepalived.org"
     DESCRIPTION
        "This MIB describes objects used by keepalived, both
         for VRRP and health checker."
     REVISION "201208240000Z"
     DESCRIPTION "routerId added to traps variables"
     REVISION "200904080000Z"
     DESCRIPTION "Initial revision"

     ::= { project 5 }

-- We are hosted under Debian OID. See http://dsa.debian.org/iana/
debian			OBJECT IDENTIFIER ::= { enterprises 9586 }
project			OBJECT IDENTIFIER ::= { debian 100 }

VrrpState ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
	"Represents a VRRP state."
    SYNTAX INTEGER {
    	init(0),
	backup(1),
	master(2),
	fault(3),
	unknown(4)
	}

global			OBJECT IDENTIFIER ::= { keepalived 1 }
vrrp                    OBJECT IDENTIFIER ::= { keepalived 2 }
check                   OBJECT IDENTIFIER ::= { keepalived 3 }
conformance		OBJECT IDENTIFIER ::= { keepalived 4 }

-- ----------------------------------------------------------------------
-- Global part
-- ----------------------------------------------------------------------

version OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	"Version of keepalived"
    ::= { global 1 }

routerId OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	"Router ID"
    ::= { global 2 }

mail	OBJECT IDENTIFIER ::= { global 3 }

smtpServerAddressType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	"Address type for SMTP server."
    ::= { mail 1 }

smtpServerAddress OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	"Address of SMTP server."
    ::= { mail 2 }

smtpServerTimeout OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	"SMTP server connection timeout."
    ::= { mail 3 }

emailFrom OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    	"Email address for the From field."
    ::= { mail 4 }

emailTable OBJECT-TYPE
    SYNTAX SEQUENCE OF EmailEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Table of email notification addresses."
    ::= { mail 5 }

emailEntry OBJECT-TYPE
    SYNTAX EmailEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Email address to be notified with an alert."
    INDEX { emailIndex }
    ::= { emailTable 1 }

EmailEntry ::= SEQUENCE {
	emailIndex Integer32,
	emailAddress DisplayString
}

emailIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index for the email address."
    ::= { emailEntry 1 }

emailAddress OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Email address to be notified when an alert is raised."
    ::= { emailEntry 2 }

trapEnable OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Indicate whether traps should be sent for various events."
    ::= { global 4 }

linkBeat OBJECT-TYPE
    SYNTAX INTEGER { netlink(1), polling(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Indicate which method is used to check if a link is up or
	down. netlink(1) means that the kernel will push a link state
	change while polling(2) means that the status of the link is
	checked periodically."
    ::= { global 5 }

-- ----------------------------------------------------------------------
-- VRRP part
-- ----------------------------------------------------------------------

-- Sync groups
-- see vrrp.h

vrrpSyncGroupTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpSyncGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of sync groups"
    ::= { vrrp 1 }

vrrpSyncGroupEntry OBJECT-TYPE
    SYNTAX VrrpSyncGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing a sync group"
    INDEX { vrrpSyncGroupIndex }
    ::= { vrrpSyncGroupTable 1 }

VrrpSyncGroupEntry ::= SEQUENCE {
	vrrpSyncGroupIndex Integer32,
	vrrpSyncGroupName DisplayString,
	vrrpSyncGroupState VrrpState,
	vrrpSyncGroupSmtpAlert INTEGER,
	vrrpSyncGroupNotifyExec INTEGER,
	vrrpSyncGroupScriptMaster DisplayString,
	vrrpSyncGroupScriptBackup DisplayString,
	vrrpSyncGroupScriptFault DisplayString,
	vrrpSyncGroupScript DisplayString
}

vrrpSyncGroupIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of the synchronisation group."
    ::= { vrrpSyncGroupEntry 1 }

vrrpSyncGroupName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the synchronisation group."
    ::= {vrrpSyncGroupEntry 2 }

vrrpSyncGroupState OBJECT-TYPE
    SYNTAX VrrpState
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current state of the synchronisation group."
    ::= {vrrpSyncGroupEntry 3 }

vrrpSyncGroupSmtpAlert OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Will SMTP alert be sent for this synchronisation group?"
    ::= {vrrpSyncGroupEntry 4 }

vrrpSyncGroupNotifyExec OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Will we execute notification script for this group?"
    ::= {vrrpSyncGroupEntry 5 }

vrrpSyncGroupScriptMaster OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute when the group becomes master."
    ::= {vrrpSyncGroupEntry 6 }

vrrpSyncGroupScriptBackup OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute when the group becomes backup."
    ::= {vrrpSyncGroupEntry 7 }

vrrpSyncGroupScriptFault OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute when the group is in fault state."
    ::= {vrrpSyncGroupEntry 8 }

vrrpSyncGroupScript OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute whenever a state change occurs."
    ::= {vrrpSyncGroupEntry 9 }

vrrpSyncGroupMemberTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpSyncGroupMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of instances contained in sync groups"
    ::= { vrrp 2 }

vrrpSyncGroupMemberEntry OBJECT-TYPE
    SYNTAX VrrpSyncGroupMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing a member of a sync group"
    INDEX { vrrpSyncGroupIndex, vrrpSyncGroupMemberInstanceIndex }
    ::= { vrrpSyncGroupMemberTable 1 }

VrrpSyncGroupMemberEntry ::= SEQUENCE {
	vrrpSyncGroupMemberInstanceIndex Integer32,
	vrrpSyncGroupMemberName DisplayString
}

vrrpSyncGroupMemberInstanceIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of an instance in a synchronisation group.
	 There is no relation with this index and the index of the
	 corresponding instance in vrrpInstanceTable. Use the name
	 to find out the corresponding instance."
    ::= { vrrpSyncGroupMemberEntry 1 }

vrrpSyncGroupMemberName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the instance contained in the synchronisation group."
    ::= { vrrpSyncGroupMemberEntry 2 }

-- VRRP instances
-- see vrrp.h

vrrpInstanceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpInstanceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of VRRP instances"
    ::= { vrrp 3 }

vrrpInstanceEntry OBJECT-TYPE
    SYNTAX VrrpInstanceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing a sync group"
    INDEX { vrrpInstanceIndex }
    ::= { vrrpInstanceTable 1 }

VrrpInstanceEntry ::= SEQUENCE {
	vrrpInstanceIndex INTEGER,
	vrrpInstanceName DisplayString,
	vrrpInstanceVirtualRouterId Unsigned32,
	vrrpInstanceState VrrpState,
	vrrpInstanceInitialState VrrpState,
	vrrpInstanceWantedState VrrpState,
	vrrpInstanceBasePriority Integer32,
	vrrpInstanceEffectivePriority Integer32,
	vrrpInstanceVipsStatus INTEGER,
	vrrpInstancePrimaryInterface DisplayString,
	vrrpInstanceTrackPrimaryIf INTEGER,
	vrrpInstanceAdvertisementsInt Unsigned32,
	vrrpInstancePreempt INTEGER,
	vrrpInstancePreemptDelay Unsigned32,
	vrrpInstanceAuthType INTEGER,
	vrrpInstanceLvsSyncDaemon INTEGER,
	vrrpInstanceLvsSyncInterface DisplayString,
	vrrpInstanceSyncGroup DisplayString,
	vrrpInstanceGarpDelay Unsigned32,
	vrrpInstanceSmtpAlert INTEGER,
	vrrpInstanceNotifyExec INTEGER,
	vrrpInstanceScriptMaster DisplayString,
	vrrpInstanceScriptBackup DisplayString,
	vrrpInstanceScriptFault DisplayString,
	vrrpInstanceScriptStop DisplayString,
	vrrpInstanceScript DisplayString,
	vrrpInstanceAccept INTEGER
}

vrrpInstanceIndex OBJECT-TYPE
    SYNTAX INTEGER {
    	static(0)
	}
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of the VRRP instance.

	 Instance 0 is for static IP and static routes."
    ::= { vrrpInstanceEntry 1 }

vrrpInstanceName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the VRRP instance."
    ::= { vrrpInstanceEntry 2 }

vrrpInstanceVirtualRouterId OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Virtual Router ID (VRID) for this VRRP instance."
    ::= { vrrpInstanceEntry 3 }

vrrpInstanceState OBJECT-TYPE
    SYNTAX VrrpState
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current state of this VRRP instance."
    ::= { vrrpInstanceEntry 4 }

vrrpInstanceInitialState OBJECT-TYPE
    SYNTAX VrrpState
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Initial state of this VRRP instance."
    ::= { vrrpInstanceEntry 5 }

vrrpInstanceWantedState OBJECT-TYPE
    SYNTAX VrrpState
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"State wanted by the operator for this VRRP instance."
    ::= { vrrpInstanceEntry 6 }

vrrpInstanceBasePriority OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
	"Base priority (as defined in the configuration file) for this
	 VRRP instance.

	 This value can be modified to force the virtual router
	 instance to become backup or master.
	 "
    ::= { vrrpInstanceEntry 7 }

vrrpInstanceEffectivePriority OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Effective priority for this VRRP instance. Status of
	 interfaces and script results are used to compute this value
	 from the base priority."
    ::= { vrrpInstanceEntry 8 }

vrrpInstanceVipsStatus OBJECT-TYPE
    SYNTAX INTEGER { allSet(1), notAllSet(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Are all VIP of this VRRP instance enabled?"
    ::= { vrrpInstanceEntry 9 }

vrrpInstancePrimaryInterface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Primary interface of this VRRP instance."
    ::= { vrrpInstanceEntry 10 }

vrrpInstanceTrackPrimaryIf OBJECT-TYPE
    SYNTAX INTEGER { tracked(1), notTracked(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Do we track the status of the primary interface?"
    ::= { vrrpInstanceEntry 11 }

vrrpInstanceAdvertisementsInt OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Delay in seconds between two VRRP advertisements and it is in centiseconds between two VRRPV3 advertisements"
    ::= { vrrpInstanceEntry 12 }

vrrpInstancePreempt OBJECT-TYPE
    SYNTAX INTEGER { preempt(1), noPreempt(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
	"Will a higher priority advertisement preempt a lower instance?"
    ::= { vrrpInstanceEntry 13 }

vrrpInstancePreemptDelay OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Delay after startup until preemption can happen. 0 means that
	 there is no delay."
    ::= { vrrpInstanceEntry 14 }

vrrpInstanceAuthType OBJECT-TYPE
    SYNTAX INTEGER {
    		none(0),
		password(1),
		ah(2)
		}
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"VRRPv2 supports authentication method to authenticate other peers. VRRPv3 does not support authentication"
    ::= { vrrpInstanceEntry 15 }

vrrpInstanceLvsSyncDaemon OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Is LVS sync daemon enabled for this VRRP instance?"
    ::= { vrrpInstanceEntry 16 }

vrrpInstanceLvsSyncInterface OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If LVS sync daemon is enabled, which interface to use for syncing?"
    ::= { vrrpInstanceEntry 17 }

vrrpInstanceSyncGroup OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the synchronisation group this VRRP instance belongs, if any."
    ::= { vrrpInstanceEntry 18 }

vrrpInstanceGarpDelay OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Delay to launch gratuitous ARP (GARP)."
    ::= { vrrpInstanceEntry 19 }

vrrpInstanceSmtpAlert OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Will SMTP alert be sent for this VRRP instance?"
    ::= { vrrpInstanceEntry 20 }

vrrpInstanceNotifyExec OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Will we execute notification script for this instance?"
    ::= { vrrpInstanceEntry 21 }

vrrpInstanceScriptMaster OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute when the instance becomes master."
    ::= { vrrpInstanceEntry 22 }

vrrpInstanceScriptBackup OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute when the instance becomes backup."
    ::= { vrrpInstanceEntry 23 }

vrrpInstanceScriptFault OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute when the instance is in fault state."
    ::= { vrrpInstanceEntry 24 }

vrrpInstanceScriptStop OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute when the instance is stopped."
    ::= { vrrpInstanceEntry 25 }

vrrpInstanceScript OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Script to execute whenever a state change occurs."
    ::= { vrrpInstanceEntry 26 }

vrrpInstanceAccept OBJECT-TYPE
    SYNTAX INTEGER { true(1), false(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
	"Accept allow the non-master owner to process the packets destined to VIP and it is supported for only VRRPv3."
    ::= { vrrpInstanceEntry 27 }

vrrpTrackedInterfaceTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpTrackedInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of tracked interfaces for each VRRP instance."
    ::= { vrrp 4 }

vrrpTrackedInterfaceEntry OBJECT-TYPE
    SYNTAX VrrpTrackedInterfaceEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing a tracked interface"
    INDEX { vrrpInstanceIndex, ifIndex }
    ::= { vrrpTrackedInterfaceTable 1 }

VrrpTrackedInterfaceEntry ::= SEQUENCE {
	vrrpTrackedInterfaceName DisplayString,
	vrrpTrackedInterfaceWeight Integer32
}

vrrpTrackedInterfaceName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the tracked interface."
    ::= { vrrpTrackedInterfaceEntry 1 }

vrrpTrackedInterfaceWeight OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Weight of the tracked interface."
    ::= { vrrpTrackedInterfaceEntry 2 }

vrrpTrackedScriptTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpTrackedScriptEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of tracked interfaces for each VRRP instance."
    ::= { vrrp 5 }

vrrpTrackedScriptEntry OBJECT-TYPE
    SYNTAX VrrpTrackedScriptEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing a tracked script"
    INDEX { vrrpInstanceIndex, vrrpTrackedScriptIndex }
    ::= { vrrpTrackedScriptTable 1 }

VrrpTrackedScriptEntry ::= SEQUENCE {
	vrrpTrackedScriptIndex Integer32,
	vrrpTrackedScriptName DisplayString,
	vrrpTrackedScriptWeight Integer32
}

vrrpTrackedScriptIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of the tracked script in the set of tracked scripts for
	 the given VRRP instance. This index has no relation with the
	 index of vrrpScriptTable."
    ::= { vrrpTrackedScriptEntry 1 }

vrrpTrackedScriptName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the tracked interface."
    ::= { vrrpTrackedScriptEntry 2 }

vrrpTrackedScriptWeight OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Weight of the tracked interface."
    ::= { vrrpTrackedScriptEntry 3 }

-- IP addresses
-- see vrrp_ipaddress.h

vrrpAddressTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of static and virtual addresses"
    ::= { vrrp 6 }

vrrpAddressEntry OBJECT-TYPE
    SYNTAX VrrpAddressEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing an address. This can be a static
         address or a virtual address. In case of static address, the
         VRRP instance index is 0."
    INDEX { vrrpInstanceIndex, vrrpAddressIndex }
    ::= { vrrpAddressTable 1 }

VrrpAddressEntry ::= SEQUENCE {
	vrrpAddressIndex Integer32,
        vrrpAddressType InetAddressType,
	vrrpAddressValue InetAddress,
	vrrpAddressBroadcast InetAddress,
	vrrpAddressMask InetAddressPrefixLength,
	vrrpAddressScope InetScopeType,
	vrrpAddressIfIndex InterfaceIndex,
	vrrpAddressIfName DisplayString,
	vrrpAddressIfAlias DisplayString,
	vrrpAddressStatus INTEGER,
	vrrpAddressAdvertising INTEGER
}

vrrpAddressIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Address index."
    ::= { vrrpAddressEntry 1 }

vrrpAddressType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"A value that represents a type of Internet address."
    ::= { vrrpAddressEntry 2 }

vrrpAddressValue OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Actual IP address."
    ::= { vrrpAddressEntry 3 }

vrrpAddressBroadcast OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Broadcast address associated with the IP address."
    ::= { vrrpAddressEntry 4 }

vrrpAddressMask OBJECT-TYPE
    SYNTAX InetAddressPrefixLength
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Address mask."
    ::= { vrrpAddressEntry 5 }

vrrpAddressScope OBJECT-TYPE
    SYNTAX InetScopeType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Address scope."
    ::= { vrrpAddressEntry 6 }

vrrpAddressIfIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Index of the interface to which the IP address is linked to."
    ::= { vrrpAddressEntry 7 }

vrrpAddressIfName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the interface to which the IP address is linked to."
    ::= { vrrpAddressEntry 8 }

vrrpAddressIfAlias OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Alias name of the interface."
    ::= { vrrpAddressEntry 9 }

vrrpAddressStatus OBJECT-TYPE
    SYNTAX INTEGER { set(1), unset(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Is the IP address set?"
    ::= { vrrpAddressEntry 10 }

vrrpAddressAdvertising OBJECT-TYPE
    SYNTAX INTEGER { advertised(1), notAdvertised(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Status of VRRP advertising for this IP address."
    ::= { vrrpAddressEntry 11 }

-- Routes
-- see vrrp_iproute.h

vrrpRouteTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpRouteEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of static and virtual routes."
    ::= { vrrp 7 }

vrrpRouteEntry OBJECT-TYPE
    SYNTAX VrrpRouteEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing a route. In case of a static route,
        the instance index is 0."
    INDEX { vrrpInstanceIndex, vrrpRouteIndex }
    ::= { vrrpRouteTable 1 }

VrrpRouteEntry ::= SEQUENCE {
	vrrpRouteIndex Integer32,
        vrrpRouteAddressType InetAddressType,
	vrrpRouteDestination InetAddress,
	vrrpRouteDestinationMask InetAddressPrefixLength,
	vrrpRouteGateway InetAddress,
	vrrpRouteSecondaryGateway InetAddress,
	vrrpRouteSource InetAddress,
	vrrpRouteMetric Unsigned32,
	vrrpRouteScope InetScopeType,
	vrrpRouteType INTEGER,
	vrrpRouteIfIndex InterfaceIndex,
	vrrpRouteIfName DisplayString,
	vrrpRouteRoutingTable Unsigned32,
	vrrpRouteStatus INTEGER
}

vrrpRouteIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Route index."
    ::= { vrrpRouteEntry 1 }

vrrpRouteAddressType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Route type of internet address."
    ::= { vrrpRouteEntry 2 }

vrrpRouteDestination OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Route destination."
    ::= { vrrpRouteEntry 3 }

vrrpRouteDestinationMask OBJECT-TYPE
    SYNTAX InetAddressPrefixLength
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Route destination mask."
    ::= { vrrpRouteEntry 4 }

vrrpRouteGateway OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Gateway for the given destination."
    ::= { vrrpRouteEntry 5 }

vrrpRouteSecondaryGateway OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"An optional second gateway for the given destination."
    ::= { vrrpRouteEntry 6 }

vrrpRouteSource OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Which source IP address to use with this route."
    ::= { vrrpRouteEntry 7 }

vrrpRouteMetric OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Metric of this route."
    ::= { vrrpRouteEntry 8 }

vrrpRouteScope OBJECT-TYPE
    SYNTAX InetScopeType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Scope of this route."
    ::= { vrrpRouteEntry 9 }

vrrpRouteType OBJECT-TYPE
    SYNTAX INTEGER { normal(1), ecmp(2), blackhole(3) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Kind of route."
    ::= { vrrpRouteEntry 10 }

vrrpRouteIfIndex OBJECT-TYPE
    SYNTAX InterfaceIndex
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Interface attached to this route."
    ::= { vrrpRouteEntry 11 }

vrrpRouteIfName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the interface of attached to this route."
    ::= { vrrpRouteEntry 12 }

vrrpRouteRoutingTable OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Routing table where to route should be inserted."
    ::= { vrrpRouteEntry 13 }

vrrpRouteStatus OBJECT-TYPE
    SYNTAX INTEGER { set(1), unset(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Is this route set in the kernel?"
    ::= { vrrpRouteEntry 14 }

-- VRRP scripts
-- see vrrp_track.h

vrrpScriptTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VrrpScriptEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Table of VRRP scripts"
    ::= { vrrp 8 }

vrrpScriptEntry OBJECT-TYPE
    SYNTAX VrrpScriptEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Information describing a VRRP script"
    INDEX { vrrpScriptIndex }
    ::= { vrrpScriptTable 1 }

VrrpScriptEntry ::= SEQUENCE {
	vrrpScriptIndex Integer32,
        vrrpScriptName DisplayString,
        vrrpScriptCommand DisplayString,
        vrrpScriptInterval Integer32,
        vrrpScriptWeight Integer32,
        vrrpScriptResult INTEGER,
        vrrpScriptRise Unsigned32,
        vrrpScriptFall Unsigned32
}

vrrpScriptIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Script index."
    ::= { vrrpScriptEntry 1 }

vrrpScriptName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Symbolic name of the script."
    ::= { vrrpScriptEntry 2 }

vrrpScriptCommand OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Command executed when running the script."
    ::= { vrrpScriptEntry 3 }

vrrpScriptInterval OBJECT-TYPE
    SYNTAX Integer32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Interval between two runs of the script."
    ::= { vrrpScriptEntry 4 }

vrrpScriptWeight OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Weight of the script if successful."
    ::= { vrrpScriptEntry 5 }

vrrpScriptResult OBJECT-TYPE
    SYNTAX INTEGER {
        disabled(0),
        init(1),
        bad(2),
        good(3),
        initgood(4)
           }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Current status of the script."
    ::= { vrrpScriptEntry 6 }

vrrpScriptRise OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "How many times the script should succeed before OK."
    ::= { vrrpScriptEntry 7 }

vrrpScriptFall OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "How many times the script should fail before KO."
    ::= { vrrpScriptEntry 8 }

-- Traps

vrrpTrap OBJECT IDENTIFIER ::= { vrrp 9 }
vrrpTraps OBJECT IDENTIFIER ::= { vrrpTrap 0 } -- Reverse-mappable
vrrpTrapControl OBJECT IDENTIFIER ::= { vrrpTrap 1 }

vrrpSyncGroupStateChange NOTIFICATION-TYPE
    OBJECTS {
    	vrrpSyncGroupName,
	vrrpSyncGroupState,
	routerId
    }
    STATUS current
    DESCRIPTION
	"This trap signifies that the state of the whole vrrp sync
	group changed."
    ::= { vrrpTraps 1 }

vrrpInstanceStateChange NOTIFICATION-TYPE
    OBJECTS {
    	vrrpInstanceName,
	vrrpInstanceState,
	vrrpInstanceInitialState,
	routerId
    }
    STATUS current
    DESCRIPTION
	"This trap signifies that the state of a vrrp instance changed."
    ::= { vrrpTraps 2 }

-- ----------------------------------------------------------------------
-- Healthchecker part
-- ----------------------------------------------------------------------

-- Virtual server group

virtualServerGroupTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VirtualServerGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Table of virtual server groups."
    ::= { check 1 }

virtualServerGroupEntry OBJECT-TYPE
    SYNTAX VirtualServerGroupEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Information describing a virtual server group."
    INDEX { virtualServerGroupIndex }
    ::= { virtualServerGroupTable 1 }

VirtualServerGroupEntry ::= SEQUENCE {
	virtualServerGroupIndex Integer32,
	virtualServerGroupName DisplayString
}

virtualServerGroupIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of the virtual server group."
    ::= { virtualServerGroupEntry 1 }

virtualServerGroupName OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Name of the virtual server group."
    ::= { virtualServerGroupEntry 2 }

virtualServerGroupMemberTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VirtualServerGroupMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Table of members of a virtual server group."
    ::= { check 2 }

virtualServerGroupMemberEntry OBJECT-TYPE
    SYNTAX VirtualServerGroupMemberEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Description of a member of a virtual server group."
    INDEX { virtualServerGroupIndex, virtualServerGroupMemberIndex }
    ::= { virtualServerGroupMemberTable 1 }

VirtualServerGroupMemberEntry ::= SEQUENCE {
	virtualServerGroupMemberIndex Integer32,
	virtualServerGroupMemberType INTEGER,
	virtualServerGroupMemberFwMark Unsigned32,
	virtualServerGroupMemberAddrType InetAddressType,
	virtualServerGroupMemberAddress InetAddress,
	virtualServerGroupMemberAddr1 InetAddress,
	virtualServerGroupMemberAddr2 InetAddress,
	virtualServerGroupMemberPort InetPortNumber
}

virtualServerGroupMemberIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of the member into virtual server group."
    ::= { virtualServerGroupMemberEntry 1 }

virtualServerGroupMemberType OBJECT-TYPE
    SYNTAX INTEGER { fwmark(1), ip(2), iprange(3) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Kind of entry: firewall mark, address with port or range of
	 addresses with port."
    ::= { virtualServerGroupMemberEntry 2 }

virtualServerGroupMemberFwMark OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Firewall mark for this member.

	 If the kind of this member is not fwmark(1), then this entry
	 should not exist for the current row."
    ::= { virtualServerGroupMemberEntry 3 }

virtualServerGroupMemberAddrType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Type of IP address for this member.

	 If the kind of this member is neither address(2) or range(3),
	 then this entry should not exist for the current row."
    ::= { virtualServerGroupMemberEntry 4 }

virtualServerGroupMemberAddress OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"IP address of this member.

	If the kind of this member is not address(2), then this entry
	should not exist for the current row."
    ::= { virtualServerGroupMemberEntry 5 }

virtualServerGroupMemberAddr1 OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"First IP address of the range for this member.

	If the kind of this member is not range(3), then this entry
	should not exist for the current row."
    ::= { virtualServerGroupMemberEntry 6 }

virtualServerGroupMemberAddr2 OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Second IP address of the range for this member.

	If the kind of this member is not range(3), then this entry
	should not exist for the current row."
    ::= { virtualServerGroupMemberEntry 7 }

virtualServerGroupMemberPort OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"V port for this member.

	If the kind of this member is neither address(2) nor range(3),
	then this entry should not exist for the current row."
    ::= { virtualServerGroupMemberEntry 8 }

-- virtual server

virtualServerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF VirtualServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Table of virtual servers."
    ::= { check 3 }

virtualServerEntry OBJECT-TYPE
    SYNTAX VirtualServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Information describing a virtual server."
    INDEX { virtualServerIndex }
    ::= { virtualServerTable 1 }

VirtualServerEntry ::= SEQUENCE {
	virtualServerIndex Integer32,
	virtualServerType INTEGER,
	virtualServerNameOfGroup DisplayString,
	virtualServerFwMark Unsigned32,
	virtualServerAddrType InetAddressType,
	virtualServerAddress InetAddress,
	virtualServerPort InetPortNumber,
	virtualServerProtocol INTEGER,
	virtualServerLoadBalancingAlgo INTEGER,
	virtualServerLoadBalancingKind INTEGER,
	virtualServerOPS TruthValue,
	virtualServerStatus INTEGER,
	virtualServerVirtualHost DisplayString,
	virtualServerPersist INTEGER,
	virtualServerPersistTimeout Unsigned32,
	virtualServerPersistGranularity InetAddress,
	virtualServerDelayLoop Unsigned32,
	virtualServerHaSuspend TruthValue,
	virtualServerAlpha INTEGER,
	virtualServerOmega INTEGER,
	virtualServerRealServersTotal Unsigned32,
	virtualServerRealServersUp Unsigned32,
	virtualServerQuorum Unsigned32,
	virtualServerQuorumStatus INTEGER,
	virtualServerQuorumUp DisplayString,
	virtualServerQuorumDown DisplayString,
	virtualServerHysteresis Unsigned32,
	virtualServerStatsConns Gauge32,
	virtualServerStatsInPkts Counter32,
	virtualServerStatsOutPkts Counter32,
	virtualServerStatsInBytes Counter64,
	virtualServerStatsOutBytes Counter64,
	virtualServerRateCps Gauge32,
	virtualServerRateInPPS Gauge32,
	virtualServerRateOutPPS Gauge32,
	virtualServerRateInBPS Gauge32,
	virtualServerRateOutBPS Gauge32
}

virtualServerIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of the virtual server."
    ::= { virtualServerEntry 1 }

virtualServerType OBJECT-TYPE
    SYNTAX INTEGER { fwmark(1), ip(2), group(3) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Type of virtual server. A virtual server can either be
	defined from a firewall mark, an IP and a port
	or from a virtual server group."
    ::= { virtualServerEntry 2 }

virtualServerNameOfGroup OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If the virtual is defined from a group, this is the name of the group."
    ::= { virtualServerEntry 3 }

virtualServerFwMark OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If the virtual server is defined from a firewall mark, this
	is the value of the mark. Otherwise, this column should not
	exist in the current row."
    ::= { virtualServerEntry 4 }

virtualServerAddrType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If the virtual server is defined from an IP, this
	is the address family. Otherwise, this column should not
	exist in the current row."
    ::= { virtualServerEntry 5 }

virtualServerAddress OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If the virtual server is defined from an IP address, this
	is the value of the IP. Otherwise, this column should not
	exist in the current row."
    ::= { virtualServerEntry 6 }

virtualServerPort OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If the virtual server is defined from an IP, this is
	the value of the port to listen for requests. Otherwise, this column
	should not exist in the current row."
    ::= { virtualServerEntry 7 }

virtualServerProtocol OBJECT-TYPE
    SYNTAX INTEGER { tcp(1), udp(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Which transport protocol should be used for this virtual server."
    ::= { virtualServerEntry 8 }

virtualServerLoadBalancingAlgo OBJECT-TYPE
    SYNTAX INTEGER {
    	rr(1),
	wrr(2),
	lc(3),
	wlc(4),
	lblc(5),
	lblcr(6),
	dh(7),
	sh(8),
	sed(9),
	nq(10),
	unknown(99)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Which load balancing algorithm (or scheduler) should be used
	for this virtual server."
    ::= { virtualServerEntry 9 }

virtualServerLoadBalancingKind OBJECT-TYPE
    SYNTAX INTEGER { nat(1), dr(2), tun(3) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Forwarding method to use for this virtual server."
    ::= { virtualServerEntry 10 }

virtualServerStatus OBJECT-TYPE
    SYNTAX INTEGER { alive(1), dead(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current status of this virtual server."
    ::= { virtualServerEntry 11 }

virtualServerVirtualHost OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Virtualhost of this server for HTTP like requests."
    ::= { virtualServerEntry 12 }

virtualServerPersist OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Is the virtual service persistence enabled?"
    ::= { virtualServerEntry 13 }

virtualServerPersistTimeout OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If this virtual service is persistence, what is the timeout."
    ::= { virtualServerEntry 14 }

virtualServerPersistGranularity OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Netmask specifying the granularity of the persistence mechanism."
    ::= { virtualServerEntry 15 }

virtualServerDelayLoop OBJECT-TYPE
    SYNTAX Unsigned32
    UNITS "seconds"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Delay in seconds between two checks."
    ::= { virtualServerEntry 16 }

virtualServerHaSuspend OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If set to true(1), checks will be suspended if the IP of the
	virtual server is currently not set."
    ::= { virtualServerEntry 17 }

virtualServerAlpha OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Is alpha mode enabled?"
    ::= { virtualServerEntry 18 }

virtualServerOmega OBJECT-TYPE
    SYNTAX INTEGER { enabled(1), disabled(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Is omega mode enabled?"
    ::= { virtualServerEntry 19 }

virtualServerRealServersTotal OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of real servers for this virtual server."
    ::= { virtualServerEntry 20 }

virtualServerRealServersUp OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Real servers actually up for this virtual server."
    ::= { virtualServerEntry 21 }

virtualServerQuorum OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Quorum to get amond real servers to consider this virtual server up."
    ::= { virtualServerEntry 22 }

virtualServerQuorumStatus OBJECT-TYPE
    SYNTAX INTEGER { met(1), notMet(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current status of the quorum for this virtual server."
    ::= { virtualServerEntry 23 }

virtualServerQuorumUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Command to execute when the quorum is met."
    ::= { virtualServerEntry 24 }

virtualServerQuorumDown OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Command to execute when the quorum is not met."
    ::= { virtualServerEntry 25 }

virtualServerHysteresis OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Hysteresis with respect to quorum count."
    ::= { virtualServerEntry 26 }

virtualServerStatsConns OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "connections"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of connections scheduled for this virtual server."
    ::= { virtualServerEntry 27 }

virtualServerStatsInPkts OBJECT-TYPE
    SYNTAX Counter32
    UNITS "packets"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of incoming packets for this virtual server."
    ::= { virtualServerEntry 28 }

virtualServerStatsOutPkts OBJECT-TYPE
    SYNTAX Counter32
    UNITS "packets"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of outgoing packets for this virtual server."
    ::= { virtualServerEntry 29 }

virtualServerStatsInBytes OBJECT-TYPE
    SYNTAX Counter64
    UNITS "bytes"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of incoming bytes for this virtual server."
    ::= { virtualServerEntry 30 }

virtualServerStatsOutBytes OBJECT-TYPE
    SYNTAX Counter64
    UNITS "bytes"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of outgoing bytes for this virtual server."
    ::= { virtualServerEntry 31 }

virtualServerRateCps OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "connections/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current connection rate for this virtual server."
    ::= { virtualServerEntry 32 }

virtualServerRateInPPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "packets/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current in packet rate for this virtual server."
    ::= { virtualServerEntry 33 }

virtualServerRateOutPPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "packets/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current out packet rate for this virtual server."
    ::= { virtualServerEntry 34 }

virtualServerRateInBPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "bytes/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current incoming rate for this virtual server."
    ::= { virtualServerEntry 35 }

virtualServerRateOutBPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "bytes/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current outgoing rate for this virtual server."
    ::= { virtualServerEntry 36 }

virtualServerOPS OBJECT-TYPE
    SYNTAX TruthValue
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"If set to true(1), One-Packet-Scheduling will be applied."
    ::= { virtualServerEntry 37 }

-- real servers

realServerTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RealServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Table of real servers. This includes regular real servers and sorry servers."
    ::= { check 4 }

realServerEntry OBJECT-TYPE
    SYNTAX RealServerEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Information describing a real server."
    INDEX { virtualServerIndex, realServerIndex }
    ::= { realServerTable 1 }

RealServerEntry ::= SEQUENCE {
	realServerIndex Integer32,
	realServerType INTEGER,
	realServerAddrType InetAddressType,
	realServerAddress InetAddress,
	realServerPort InetPortNumber,
	realServerStatus INTEGER,
	realServerWeight Integer32,
	realServerUpperConnectionLimit Unsigned32,
	realServerLowerConnectionLimit Unsigned32,
	realServerActionWhenDown INTEGER,
	realServerNotifyUp DisplayString,
	realServerNotifyDown DisplayString,
	realServerFailedChecks Unsigned32,
	realServerStatsConns Gauge32,
	realServerStatsActiveConns Gauge32,
	realServerStatsInactiveConns Gauge32,
	realServerStatsPersistentConns Gauge32,
	realServerStatsInPkts Counter32,
	realServerStatsOutPkts Counter32,
	realServerStatsInBytes Counter64,
	realServerStatsOutBytes Counter64,
	realServerRateCps Gauge32,
	realServerRateInPPS Gauge32,
	realServerRateOutPPS Gauge32,
	realServerRateInBPS Gauge32,
	realServerRateOutBPS Gauge32
}

realServerIndex OBJECT-TYPE
    SYNTAX Integer32 (1..2147483647)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
	"Index of the real server."
    ::= { realServerEntry 1 }

realServerType OBJECT-TYPE
    SYNTAX INTEGER { regular(1), sorry(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Type of real server: either a regular real server or a sorry server."
    ::= { realServerEntry 2 }

realServerAddrType OBJECT-TYPE
    SYNTAX InetAddressType
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Address family for this real server."
    ::= { realServerEntry 3 }

realServerAddress OBJECT-TYPE
    SYNTAX InetAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"IP address of this real server."
    ::= { realServerEntry 4 }

realServerPort OBJECT-TYPE
    SYNTAX InetPortNumber
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Port of the service."
    ::= { realServerEntry 5 }

realServerStatus OBJECT-TYPE
    SYNTAX INTEGER { alive(1), dead(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Status of this real server."
    ::= { realServerEntry 6 }

realServerWeight OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
	"Weight of this real server.

	This value can be set to 0 to disable the real server."
    ::= { realServerEntry 7 }

realServerUpperConnectionLimit OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Maximum number of connections for this real server."
    ::= { realServerEntry 8 }

realServerLowerConnectionLimit OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Minimum number of connections for this real server."
    ::= { realServerEntry 9 }

realServerActionWhenDown OBJECT-TYPE
    SYNTAX INTEGER { remove(1), inhibit(2) }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"What action is performed when this server is down. Its weight
	can be set to 0 (inhibit) or it can be removed from the pool."
    ::= { realServerEntry 10 }

realServerNotifyUp OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Command to execute when this server becomes alive."
    ::= { realServerEntry 11 }

realServerNotifyDown OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Command to execute when this server becomes dead."
    ::= { realServerEntry 12 }

realServerFailedChecks OBJECT-TYPE
    SYNTAX Unsigned32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"How many failed checks for this real server."
    ::= { realServerEntry 13 }

realServerStatsConns OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "connections"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of connections scheduled for this real server."
    ::= { realServerEntry 14 }

realServerStatsActiveConns OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "connections"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current active connections for this real server."
    ::= { realServerEntry 15 }

realServerStatsInactiveConns OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "connections"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current inactive connections for this real server."
    ::= { realServerEntry 16 }

realServerStatsPersistentConns OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "connections"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current persistent connections for this real server."
    ::= { realServerEntry 17 }

realServerStatsInPkts OBJECT-TYPE
    SYNTAX Counter32
    UNITS "packets"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of incoming packets for this real server."
    ::= { realServerEntry 18 }

realServerStatsOutPkts OBJECT-TYPE
    SYNTAX Counter32
    UNITS "packets"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of outgoing packets for this real server."
    ::= { realServerEntry 19 }

realServerStatsInBytes OBJECT-TYPE
    SYNTAX Counter64
    UNITS "bytes"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of incoming bytes for this real server."
    ::= { realServerEntry 20 }

realServerStatsOutBytes OBJECT-TYPE
    SYNTAX Counter64
    UNITS "bytes"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Total number of outgoing bytes for this real server."
    ::= { realServerEntry 21 }

realServerRateCps OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "connections/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current connection rate for this real server."
    ::= { realServerEntry 22 }

realServerRateInPPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "packets/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current in packet rate for this real server."
    ::= { realServerEntry 23 }

realServerRateOutPPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "packets/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current out packet rate for this real server."
    ::= { realServerEntry 24 }

realServerRateInBPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "bytes/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current incoming rate for this real server."
    ::= { realServerEntry 25 }

realServerRateOutBPS OBJECT-TYPE
    SYNTAX Gauge32
    UNITS "bytes/s"
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
	"Current outgoing rate for this real server."
    ::= { realServerEntry 26 }

-- Traps

checkTrap OBJECT IDENTIFIER ::= { check 5 }
checkTraps OBJECT IDENTIFIER ::= { checkTrap 0 } -- Reverse-mappable
checkTrapControl OBJECT IDENTIFIER ::= { checkTrap 1 }

realServerStateChange NOTIFICATION-TYPE
    OBJECTS {
    	realServerAddrType,
	realServerAddress,
	realServerPort,
	realServerStatus,
	virtualServerType,
	virtualServerProtocol,
	virtualServerRealServersUp,
	virtualServerRealServersTotal,
	routerId
    }
    STATUS current
    DESCRIPTION
	"This trap signifies that the state of a real server has
	changed. Additional varbinds will be added depending on the
	value of virtualServerType: virtualServerNameOfGroup,
	virtualServerFwMark, virtualServerAddrType,
	virtualServerAddress, virtualServerPort."
    ::= { checkTraps 1 }

virtualServerQuorumStateChange NOTIFICATION-TYPE
    OBJECTS {
	virtualServerType,
	virtualServerProtocol,
	virtualServerQuorumStatus,
	virtualServerQuorum,
	virtualServerRealServersUp,
	virtualServerRealServersTotal,
	routerId
    }
    STATUS current
    DESCRIPTION
	"This trap signifies that the quorum of a virtual server has
	changed. Additional varbinds will be added depending on the
	value of virtualServerType: virtualServerNameOfGroup,
	virtualServerFwMark, virtualServerAddrType,
	virtualServerAddress, virtualServerPort."
    ::= { checkTraps 2 }

-- ----------------------------------------------------------------------
-- Conformance
-- ----------------------------------------------------------------------

compliances  OBJECT IDENTIFIER ::= { conformance 1 }
groups	     OBJECT IDENTIFIER ::= { conformance 2 }

globalCompliances MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
	"Compliance statement for global data"
    MODULE -- this module
    MANDATORY-GROUPS {
    	globalGroup
    }
    ::= { compliances 1 }

vrrpCompliances MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
	"The VRRP compliance statement"
    MODULE -- this module
    MANDATORY-GROUPS {
	vrrpScriptGroup,
	vrrpSyncGroup,
	vrrpInstanceGroup,
	vrrpTrapsGroup
    }
    ::= { compliances 2 }

checkCompliances MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
	"The check compliance statement"
    MODULE -- this module
    MANDATORY-GROUPS {
	virtualServerGroupGroup,
	virtualServerGroup,
	realServerGroup,
	checkTrapsGroup
    }
    ::= { compliances 3 }

globalGroup OBJECT-GROUP
    OBJECTS {
    	version,
	routerId,
	smtpServerAddressType,
	smtpServerAddress,
	smtpServerTimeout,
	emailFrom,
	emailAddress,
	trapEnable,
	linkBeat
    }
    STATUS current
    DESCRIPTION
	"Conformance group for global data."
    ::= { groups 1 }

vrrpGroups OBJECT IDENTIFIER ::= { groups 2 }

vrrpSyncGroup OBJECT-GROUP
    OBJECTS {
	vrrpSyncGroupName,
	vrrpSyncGroupState,
	vrrpSyncGroupSmtpAlert,
	vrrpSyncGroupNotifyExec,
	vrrpSyncGroupScriptMaster,
	vrrpSyncGroupScriptBackup,
	vrrpSyncGroupScriptFault,
	vrrpSyncGroupScript,
	vrrpSyncGroupMemberName
	}
    STATUS current
    DESCRIPTION
	"Conformance group for synchronisation groups."
    ::= { vrrpGroups 1 }

vrrpInstanceGroup OBJECT-GROUP
    OBJECTS {
	vrrpInstanceName,
	vrrpInstanceVirtualRouterId,
	vrrpInstanceState,
	vrrpInstanceInitialState,
	vrrpInstanceWantedState,
	vrrpInstanceBasePriority,
	vrrpInstanceEffectivePriority,
	vrrpInstanceVipsStatus,
	vrrpInstancePrimaryInterface,
	vrrpInstanceTrackPrimaryIf,
	vrrpInstanceAdvertisementsInt,
	vrrpInstancePreempt,
	vrrpInstancePreemptDelay,
	vrrpInstanceAuthType,
	vrrpInstanceLvsSyncDaemon,
	vrrpInstanceLvsSyncInterface,
	vrrpInstanceSyncGroup,
	vrrpInstanceGarpDelay,
	vrrpInstanceSmtpAlert,
	vrrpInstanceNotifyExec,
	vrrpInstanceScriptMaster,
	vrrpInstanceScriptBackup,
	vrrpInstanceScriptFault,
	vrrpInstanceScriptStop,
	vrrpInstanceScript,
        vrrpInstanceAccept,
	vrrpTrackedInterfaceName,
	vrrpTrackedInterfaceWeight,
	vrrpTrackedScriptName,
	vrrpTrackedScriptWeight,
        vrrpAddressType,
	vrrpAddressValue,
	vrrpAddressBroadcast,
	vrrpAddressMask,
	vrrpAddressScope,
	vrrpAddressIfIndex,
	vrrpAddressIfName,
	vrrpAddressIfAlias,
	vrrpAddressStatus,
	vrrpAddressAdvertising,
        vrrpRouteAddressType,
	vrrpRouteDestination,
	vrrpRouteDestinationMask,
	vrrpRouteGateway,
	vrrpRouteSecondaryGateway,
	vrrpRouteSource,
	vrrpRouteMetric,
	vrrpRouteScope,
	vrrpRouteType,
	vrrpRouteIfIndex,
	vrrpRouteIfName,
	vrrpRouteRoutingTable,
	vrrpRouteStatus
	}
    STATUS current
    DESCRIPTION
	"Conformance group for VRRP instances."
    ::= { vrrpGroups 2 }

vrrpScriptGroup OBJECT-GROUP
    OBJECTS {
    	vrrpScriptName,
	vrrpScriptCommand,
	vrrpScriptInterval,
	vrrpScriptWeight,
	vrrpScriptResult,
	vrrpScriptRise,
	vrrpScriptFall
	}
    STATUS current
    DESCRIPTION
	"Conformance group for VRRP scripts."
    ::= { vrrpGroups 3 }

vrrpTrapsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
    	vrrpSyncGroupStateChange,
    	vrrpInstanceStateChange
	}
    STATUS current
    DESCRIPTION
	"Conformance group for VRRP traps."
    ::= { vrrpGroups 4 }

checkGroups OBJECT IDENTIFIER ::= { groups 3 }

virtualServerGroupGroup OBJECT-GROUP
    OBJECTS {
	virtualServerGroupName,
	virtualServerGroupMemberType,
	virtualServerGroupMemberFwMark,
	virtualServerGroupMemberAddrType,
	virtualServerGroupMemberAddress,
	virtualServerGroupMemberAddr1,
	virtualServerGroupMemberAddr2,
	virtualServerGroupMemberPort
	}
    STATUS current
    DESCRIPTION
	"Conformance group for virtual server groups."
    ::= { checkGroups 1 }

virtualServerGroup OBJECT-GROUP
    OBJECTS {
	virtualServerType,
	virtualServerNameOfGroup,
	virtualServerFwMark,
	virtualServerAddrType,
	virtualServerAddress,
	virtualServerPort,
	virtualServerProtocol,
	virtualServerLoadBalancingAlgo,
	virtualServerLoadBalancingKind,
	virtualServerStatus,
	virtualServerVirtualHost,
	virtualServerPersist,
	virtualServerPersistTimeout,
	virtualServerPersistGranularity,
	virtualServerDelayLoop,
	virtualServerHaSuspend,
	virtualServerAlpha,
	virtualServerOmega,
	virtualServerRealServersTotal,
	virtualServerRealServersUp,
	virtualServerQuorum,
	virtualServerQuorumStatus,
	virtualServerQuorumUp,
	virtualServerQuorumDown,
	virtualServerHysteresis,
	virtualServerStatsConns,
	virtualServerStatsInPkts,
	virtualServerStatsOutPkts,
	virtualServerStatsInBytes,
	virtualServerStatsOutBytes,
	virtualServerRateCps,
	virtualServerRateInPPS,
	virtualServerRateOutPPS,
	virtualServerRateInBPS,
	virtualServerRateOutBPS
	}
    STATUS current
    DESCRIPTION
	"Conformance group for virtual servers."
    ::= { checkGroups 2 }

realServerGroup OBJECT-GROUP
    OBJECTS {
	realServerType,
	realServerAddrType,
	realServerAddress,
	realServerPort,
	realServerStatus,
	realServerWeight,
	realServerUpperConnectionLimit,
	realServerLowerConnectionLimit,
	realServerActionWhenDown,
	realServerNotifyUp,
	realServerNotifyDown,
	realServerFailedChecks,
	realServerStatsConns,
	realServerStatsActiveConns,
	realServerStatsInactiveConns,
	realServerStatsPersistentConns,
	realServerStatsInPkts,
	realServerStatsOutPkts,
	realServerStatsInBytes,
	realServerStatsOutBytes,
	realServerRateCps,
	realServerRateInPPS,
	realServerRateOutPPS,
	realServerRateInBPS,
	realServerRateOutBPS
	}
    STATUS current
    DESCRIPTION
	"Conformance group for real servers."
    ::= { checkGroups 3 }

checkTrapsGroup NOTIFICATION-GROUP
    NOTIFICATIONS {
    	realServerStateChange,
    	virtualServerQuorumStateChange
	}
    STATUS current
    DESCRIPTION
	"Conformance group for check traps."
    ::= { checkGroups 4 }

END