/lib/firmware/carl9170fw/carlfw/include/timer.h is in linux-firmware 1.157.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 | /*
* carl9170 firmware - used by the ar9170 wireless device
*
* Clock, Timer & Timing
*
* Copyright (c) 2000-2005 ZyDAS Technology Corporation
* Copyright (c) 2007-2009 Atheros Communications, Inc.
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2009-2011 Christian Lamparter <chunkeey@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef __CARL9170FW_TIMER_H
#define __CARL9170FW_TIMER_H
#include "config.h"
enum cpu_clock_t {
AHB_40MHZ_OSC = 0,
AHB_20_22MHZ = 1,
AHB_40_44MHZ = 2,
AHB_80_88MHZ = 3
};
static inline __inline uint32_t get_clock_counter(void)
{
return (get(AR9170_TIMER_REG_CLOCK_HIGH) << 16) | get(AR9170_TIMER_REG_CLOCK_LOW);
}
/*
* works only up to 97 secs [44 MHz] or 107 secs for 40 MHz
* Also, the delay wait will be affected by 2.4GHz<->5GHz
* band changes.
*/
static inline __inline bool is_after_msecs(const uint32_t t0, const uint32_t msecs)
{
return ((get_clock_counter() - t0) / 1000) > (msecs * fw.ticks_per_usec);
}
/*
* Note: Be careful with [u]delay. They won't service the
* hardware watchdog timer. It might trigger if you
* wait long enough. Also they don't terminate if sec is
* above 97 sec [44MHz] or more than 107 sec [40MHz].
*/
static inline __inline void delay(const uint32_t msec)
{
uint32_t t1, t2, dt, wt;
wt = msec * fw.ticks_per_usec;
t1 = get_clock_counter();
while (1) {
t2 = get_clock_counter();
dt = (t2 - t1) / 1000;
if (dt >= wt)
break;
}
}
static inline __inline void udelay(const uint32_t usec)
{
uint32_t t1, t2, dt;
t1 = get_clock_counter();
while (1) {
t2 = get_clock_counter();
dt = (t2 - t1);
if (dt >= (usec * fw.ticks_per_usec))
break;
}
}
void clock_set(enum cpu_clock_t _clock, bool on);
#endif /* __CARL9170FW_TIMER_H */
|