inn2 2.5.3-3ubuntu1 / usr / lib / news / bin / innupgrade

#! /usr/bin/perl -w -T

##  $Id: innupgrade.in 9167 2011-01-24 21:24:23Z iulius $
##
##  Convert INN configuration files to the current syntax.
##
##  Intended to be run during a major version upgrade, this script tries to
##  convert existing INN configuration files to the syntax expected by the
##  current version, if that's changed.
##
##  Note that this script cannot use INN::Config, since loading that file
##  requires innconfval be able to parse inn.conf, and until this script runs,
##  inn.conf may not be valid.
##
##  Tainting ("-T" flag to perl) is on because innupgrade can be run as a
##  setgid program on a few systems ("*g*make update" does that for instance).
##  Therefore, we have to be sure innupgrade is taint-safe because Perl
##  will check for tainted variables when it runs a setgid script.
##
##  Currently handles the following conversions:
##
##   * Clean up inn.conf for the new parser in INN 2.4.
##   * Add the hismethod parameter to inn.conf if not found.
##   * Rename nntpactsync to incominglogfrequency in inn.conf.
##   * Move parameters from overview.fmt to inn.conf if needed.
##   * Move parameters from sasl.conf to inn.conf if needed.
##   * Rename or remove obsolete files.
##   * Change startinnfeed to innfeed or imapfeed in newsfeeds.

require 5.003;

use strict;
use vars qw(%FIXES %RENAME);
use subs qw(fix_inn_conf);

use Getopt::Long qw(GetOptions);

# The mappings of file names to fixes.
%FIXES = ('inn.conf'  => \&fix_inn_conf,
          'newsfeeds' => \&fix_newsfeeds);

# The mappings of obsolete file names to rename.
# If the new name is empty, the file is removed.
%RENAME = ('auth_smb'         => 'auth_smb.OLD',     # Obsolete programs in INN 2.5.0.
           'auth_smb.8'       => '',
           'gpgverify'        => 'gpgverify.OLD',
           'inndstart'        => 'inndstart.OLD',
           'inndstart.8'      => '',
           'overview.fmt'     => 'overview.fmt.OLD',
           'overview.fmt.5'   => '',
           'sasl.conf'        => 'sasl.conf.OLD',
           'sasl.conf.5'      => '',
           'startinnfeed'     => 'startinnfeed.OLD',
           'startinnfeed.1'   => '',

           'compliance-nntp'  => '',                 # Obsolete documentation in INN 2.5.0.
           'makeactive.8'     => '',                 # -- empty placeholder.
           'parsedate.3'      => '',                 # -- replaced by convdate.
           'pgpverify.8'      => '',                 # -- it is pgpverify(1).
           'README.readers.conf' => '',              # -- it is external-auth.
           'sm.8'             => '',                 # -- it is sm(1).

           'innfeed.1'        => '',                 # It is innfeed(8) in INN 2.5.3.

           'hook-tcl'         => 'hook-tcl.OLD',     # Obsolete Tcl hooks in INN 2.5.0.
           'filter.tcl'       => 'filter.tcl.OLD',
           'startup.tcl'      => 'startup.tcl.OLD',

           # In Debian we handle this via the dpkg conffile mechanism
           # 'motd.news'        => 'motd.nnrpd'        # Rename in INN 2.5.3.
          );

# Clean up inn.conf for the new parser in INN 2.4.  Null keys (keys without
# values) need to be commented out since they're no longer allowed (don't just
# remove them entirely since people may want them there as examples), and
# string values must be quoted if they contain any special characters.  Takes
# a reference to an array containing the contents of the file, a reference to
# an array into which the output should be put, and the file name for error
# reporting.
sub fix_inn_conf {
    my ($input, $output, $file) = @_;
    my $line = 0;
    my ($raw, $hismethod, $overview, $tls);
    local $_;
    for $raw (@$input) {
        $_ = $raw;
        $line++;
        # Commented or blank lines.
        if (/^\s*\#/ || /^\s*$/) {
            push (@$output, $_);
            next;
        }
        chomp;
        unless (/^(\s*)(\S+):(\s*)(.*)/) {
            warn "$file:$line: cannot parse line: $_\n";
            push (@$output, $_);
            next;
        }

        my ($indent, $key, $space, $value) = ($1, $2, $3, $4);

        # Empty value.
        if ($value eq '') {
            push (@$output, "#$_\n");
            next;
        }

        $hismethod = 1 if $key eq 'hismethod';
        $overview = 1 if $key =~ /^extraoverview(advertised|hidden)$/;
        $tls = 1 if $key =~ /^tls(capath|cafile|certfile|keyfile)$/;

        if ($key eq 'nntpactsync') {
            $key = 'incominglogfrequency';
        }

        # A list value (on only one line).
        # This condition must occur after having checked for $overview.
        if ($value =~ /^\[/) {
            push (@$output, "$_\n");
            next;
        }

        $value =~ s/\s+$//;
        if ($value =~ /[\s;\"<>\[\]\\{}]/ && $value !~ /^\".*\"\s*$/) {
            $value =~ s/([\"\\])/\\$1/g;
            $value = '"' . $value . '"';
        }

        push (@$output, "$indent$key:$space$value\n");
    }

    # Add a setting of hismethod if one wasn't present in the original file.
    unless ($hismethod) {
        push (@$output, "\n# Added by innupgrade.\nhismethod: hisv6\n");
    }

    # Import the settings from overview.fmt if present and not found in inn.conf.
    if (!$overview && -f 'overview.fmt') {
        open (OVERVIEWFMT, 'overview.fmt') or die "Can't open overview.fmt: $!\n";
        my (@extraoverview, $foundfull, $foundxref);
        while (<OVERVIEWFMT>) {
            # Find out the first ":full" in the file.  It may not be "Xref:full".
            # One "Xref" is already advertised as the eighth field in
            # the overview database so we have to drop the *first* "Xref:full".
            if (!$foundfull) {
                if (/:full/i && !/^\s*\#/) {
                    $foundfull = 1;
                } else {
                    next;
                }
            }

            next if (/^\s*\#/ || !/:full/i);

            if (!$foundxref) {
                if (/Xref:full/i) {
                    $foundxref = 1;
                    next;
                }
            }

            chomp;
            s/\s//g;
            s/:full.*$//i;
            push (@extraoverview, $_);
        }
        close (OVERVIEWFMT);
        if ($#extraoverview >= 0) {
            push (@$output, "\n# Moved from overview.fmt by innupgrade.\n");
            push (@$output, "extraoverviewadvertised: [ " .
                            join (" ", @extraoverview) . " ]\n");
        }
    }

    # Import the settings from sasl.conf if present and not found in inn.conf.
    if (!$tls && -f 'sasl.conf') {
        open (SASL, 'sasl.conf') or die "Can't open sasl.conf: $!\n";
        my (@sasl, $found);
        while (<SASL>) {
            $found = 1 if (/\S/ && !/^\s*\#/);
            s/^(\s*)tls_ca_file:/tlscafile:/;
            s/^(\s*)tls_ca_path:/tlscapath:/;
            s/^(\s*)tls_cert_file:/tlscertfile:/;
            s/^(\s*)tls_key_file:/tlskeyfile:/;
            push (@sasl, $_);
        }
        close (SASL);
        if ($found) {
            push (@$output, "\n# Moved from sasl.conf by innupgrade.\n");
            push (@$output, @sasl);
        }
    }
}

# Replace startinnfeed with the appropriate invocation of innfeed or imapfeed
# in newsfeeds.  Takes a reference to an array containing the contents of the
# file, a reference to an array into which the output should be put, and the
# file name for error reporting.
sub fix_newsfeeds {
    my ($input, $output, $file) = @_;
    my $line = 0;
    my $raw;
    local $_;
    for $raw (@$input) {
        $_ = $raw;
        $line++;
        if (/^\s*\#/ || /^\s*$/) {
            push (@$output, $_);
            next;
        }
        chomp;
        s{(/\S+)/startinnfeed\b(\s+imapfeed)?\b}
            {$2 ? "$1/imapfeed" : "$1/innfeed"}e;
        push (@$output, "$_\n");
    }
}

# Upgrade a particular file.  Open the file, read it into an array, and then
# run the fix function on it.  If the fix function generates different output
# than the current contents of the file, change the file.
sub upgrade_file {
    my ($file, $function) = @_;
    open (INPUT, $file) or die "$file: cannot open: $!\n";
    my @input = <INPUT>;
    close INPUT;
    my @output;
    &$function (\@input, \@output, $file);
    if (join ('', @input) ne join ('', @output)) {
        if (-e "$file.OLD") {
            if (-t STDIN) {
                print "$file.OLD already exists, overwrite (y/N)? ";
                my $answer = <STDIN>;
                if ($answer !~ /y/i) {
                    die "$file: backup $file.OLD already exists, aborting\n";
                }
            } else {
                die "$file: backup $file.OLD already exists\n";
            }
        }
        print "Updating $file, old version saved as $file.OLD\n";
        my ($user, $group) = (stat $file)[4,5];
        open (OUTPUT, "> $file.new.$$")
            or die "$file: cannot create $file.new.$$: $!\n";
        print OUTPUT @output;
        close OUTPUT or die "$file: cannot flush new file: $!\n";
        unless (link ($file, "$file.OLD")) {
            rename ($file, "$file.OLD")
                or die "$file: cannot rename to $file.OLD: $!\n";
        }
        if ($> == 0) {
            if (defined ($user) && defined ($group)) {
                chown ($user, $group, "$file.new.$$")
                    or warn "$file: cannot chown $file.new.$$: $!\n";
            } else {
                warn "$file: cannot find owner and group of $file\n";
            }
        }
        rename ("$file.new.$$", $file)
            or die "$file: cannot replace with $file.new.$$: $!\n";
    }
}

# Upgrade a directory.  Scan the directory for files that have upgrade rules
# defined and for each one of those, try running the upgrade rule.
# Also rename obsolete files, appending ".OLD" to their name.
sub upgrade_directory {
    my $directory = shift;
    my $file;
    if ($directory =~ /^(.*)\/?$/) {
        $directory = $1;
    }
    chdir $directory or die "Can't chdir to $directory: $!\n";
    opendir (DIR, ".") or die "Can't opendir $directory: $!\n";
    for (readdir DIR) {
        if ($_ =~ /^([^\/]+)$/) {
           $file = $1;
        }
        if (exists ($FIXES{$file})) {
            upgrade_file ($file, $FIXES{$file});
        }
    }
    closedir (DIR);
    opendir (DIR, ".") or die "Can't opendir $directory: $!\n";
    for (readdir DIR) {
        if ($_ =~ /^([^\/]+)$/) {
           $file = $1;
        }
        if (exists ($RENAME{$file})) {
            if ($RENAME{$file} eq '') {
                unlink ($file)
                    or die "$file: cannot remove: $!\n";
            } else {
                rename ($file, $RENAME{$file})
                    or die "$file: cannot rename to $file.OLD: $!\n";
            }
        }
    }
    closedir (DIR);
}


# The main routine.  Parse command-line options to figure out what we're
# doing.
my ($file, $type);
Getopt::Long::config ('bundling');
GetOptions ('file|f=s' => \$file,
            'type|t=s' => \$type) or exit 1;
if ($file) {
    my ($dirname, $basename);
    if ($file =~ /^(.*)\/([^\/]+)$/) {
        $dirname = $1;
        $basename = $2;
    }
    chdir $dirname or die "Can't chdir to $dirname: $!\n";
    $type ||= $basename;
    if (! exists($FIXES{$type})) { die "No upgrade rules defined for $basename\n" }
    upgrade_file ($basename, $FIXES{$type});
} else {
    if (@ARGV != 1) { die "Usage: innupgrade <directory>\n" }
    my $directory = shift;
    upgrade_directory ($directory);
}