boxbackup-client 0.11.1~r2837-1 / postinst

#! /bin/bash
# postinst script for boxbackup-client
#
# see: dh_installdeb(1)

set -e

# summary of how this script can be called:
#        * <postinst> `configure' <most-recently-configured-version>
#        * <old-postinst> `abort-upgrade' <new version>
#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
#          <new-version>
#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
#          <failed-install-package> <version> `removing'
#          <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
#
# quoting from the policy:
#     Any necessary prompting should almost always be confined to the
#     post-installation script, and should be protected with a conditional
#     so that unnecessary prompting doesn't happen if a package's
#     installation fails and the `postinst' is called with `abort-upgrade',
#     `abort-remove' or `abort-deconfigure'.

#loading debconf module
. /usr/share/debconf/confmodule

CONFDIR=/etc/boxbackup
DEBCONFBB=$CONFDIR/bbackupd.debconf
BBCONF=$CONFDIR/bbackupd.conf
BBKEY=$CONFDIR/bbackupd/boxbackup-client-encrypt-key.raw
BBPRIVKEY=$CONFDIR/bbackupd/boxbackup-client-priv-key.pem
BBCERTREQ=$CONFDIR/bbackupd/boxbackup-client-cert-req.pem
BBCERT=$CONFDIR/bbackupd/boxbackup-client-cert.pem
BBCACERT=$CONFDIR/bbackupd/boxbackup-server-ca-cert.pem
DEBCONFNOTIFY=$CONFDIR/bbackupd/notifyadmin.debconf
NOTIFYSCRIPT=$CONFDIR/bbackupd/notifyadmin

case "$1" in
    configure)
	db_get boxbackup-client/debconf
	if [ "$RET" = "true" ]; then
	    # Generate configuration files
	    # backupd.conf
	    echo "#To reconfigure boxbackup-client run #dpkg-reconfigure boxbackup-client" >> $DEBCONFBB

	    db_get boxbackup-client/backupServer
	    echo "StoreHostname = $RET" >> $DEBCONFBB

	    db_get boxbackup-client/accountNumber
	    ACCOUNT=$RET
	    echo "AccountNumber = 0x$ACCOUNT" >> $DEBCONFBB
	    echo "KeysFile = $BBKEY" >> $DEBCONFBB
	    echo "" >> $DEBCONFBB
	    echo "CertificateFile = $BBCERT" >> $DEBCONFBB
	    echo "PrivateKeyFile = $BBPRIVKEY" >> $DEBCONFBB
	    echo "TrustedCAsFile = $BBCACERT" >> $DEBCONFBB
	    echo "" >> $DEBCONFBB
	    echo "DataDirectory = /var/lib/bbackupd" >> $DEBCONFBB

	    cat >>$DEBCONFBB <<__EOF

# This script is run whenever bbackupd encounters a problem which requires
# the system administrator to assist:
# 1) The store is full, and no more data can be uploaded.
# 2) Some files or directories were not readable.
# The default script emails the system administrator.
NotifyScript = $NOTIFYSCRIPT

__EOF

	    db_get boxbackup-client/backupMode
	    if [ "$RET" = "lazy" ]; then
		db_get boxbackup-client/UpdateStoreInterval
		UPDATE=$RET
		[ -z "$UPDATE" ] && UPDATE="3600"

		db_get boxbackup-client/MinimumFileAge
		FILEAGE=$RET
		[ -z "$FILEAGE" ] && FILEAGE="21600"

		db_get boxbackup-client/MaxUploadWait
		UPWAIT=$RET
		[ -z "$UPWAIT" ] && UPWAIT="86400"

		AUTO=yes
	    else
		AUTO=no
		UPDATE=0
		FILEAGE=0
		UPWAIT=0
	    fi

	    cat >>$DEBCONFBB <<__EOF
# Backup mode specification
# With snapshot mode, you will need to run bbackupctl to instruct the daemon to upload files.
# Set to no for snapshot mode and yes for lazy mode
AutomaticBackup = $AUTO

# A scan of the local discs will be made once an hour (approximately).
# To avoid cycles of load on the server, this time is randomly adjusted by a small
# percentage as the daemon runs.
# Defaults: 3600 for lazy mode - 0 for snapshot mode
UpdateStoreInterval = $UPDATE

# A file must have been modified at least 6 hours ago before it will be uploaded.
# Defaults: 21600 for lazy mode - 0 for snapshot mode
MinimumFileAge = $FILEAGE

# If a file is modified repeated, it won't be uploaded immediately in case it's modified again.
# However, it should be uploaded eventually. This is how long we should wait after first noticing
# a change. (1 day)
# Defaults: 86400 for lazy mode - 0 for snapshot mode
MaxUploadWait = $UPWAIT

# Files above this size (in bytes) are tracked, and if they are renamed they will simply be
# renamed on the server, rather than being uploaded again. (64k - 1)
FileTrackingSizeThreshold = 65535

# The daemon does "changes only" uploads for files above this size (in bytes).
# Files less than it are uploaded whole without this extra processing.
DiffingUploadSizeThreshold = 8192

# The limit on how much time is spent diffing files. Most files shouldn't take very long,
# but if you have really big files you can use this to limit the time spent diffing them.
# * Reduce if you are having problems with processor usage.
# * Increase if you have large files, and think the upload of changes is too large and want
#   to spend more time searching for unchanged blocks.
MaximumDiffingTime = 20

# Uncomment this line to see exactly what the daemon is going when it's connected to the server.
# ExtendedLogging = yes

# Use this to temporarily stop bbackupd from syncronising or connecting to the store.
# This specifies a program or script script which is run just before each sync, and ideally
# the full path to the interpreter. It will be run as the same user bbackupd is running as,
# usually root.
# The script prints either "now" or a number to STDOUT (and a terminating newline, no quotes).
# If the result was "now", then the sync will happen. If it's a number, then the script will
# be asked again in that number of seconds.
# For example, you could use this on a laptop to only backup when on a specific network.

# SyncAllowScript = /path/to/intepreter/or/exe script-name parameters etc

# Where the command socket is created in the filesystem.
CommandSocket = /var/run/bbackupd.sock

Server
{
    PidFile = /var/run/bbackupd.pid
}

#
# BackupLocations specifies which locations on disc should be backed up. Each
# directory is in the format
#
#	name
#	{
#		Path = /path/of/directory
#		(optional exclude directives)
#	}
#
# 'name' is derived from the Path by the config script, but should merely be
# unique.
#
# The exclude directives are of the form
#
#	[Exclude|AlwaysInclude][File|Dir][|sRegex] = regex or full pathname
#
# (The regex suffix is shown as 'sRegex' to make File or Dir plural)
#
# For example:
#
#	ExcludeDir = /home/guest-user
#	ExcludeFilesRegex = \.(mp3|MP3)$
#	AlwaysIncludeFile = /home/username/veryimportant.mp3
#
# This excludes the directory /home/guest-user from the backup along with all mp3
# files, except one MP3 file in particular.
#
# In general, Exclude excludes a file or directory, unless the directory is
# explicitly mentioned in a AlwaysInclude directive.
#
# If a directive ends in Regex, then it is a regular expression rather than a
# explicit full pathname. See
#
#	man 7 re_format
#
# for the regex syntax on your platform.
#

BackupLocations
{
__EOF

	    db_get boxbackup-client/backupDirs

	    for dir in $RET; do
		NAME=`echo $dir | sed 's/\//-/g' | sed 's/^-//'`

		# TODO : exclude encrypt key file from the backup

		echo "	$NAME" >> $DEBCONFBB
		echo "		{" >> $DEBCONFBB
		echo "			Path = $dir" >> $DEBCONFBB
		echo "		}" >> $DEBCONFBB
	    done

	    echo "}" >> $DEBCONFBB

	    # Encryption key
	    if [ ! -e $BBKEY ]; then
		if ! openssl rand -out $BBKEY 1024 >&2; then
		    echo "Can't generate encryption key. Check why." >&2
		fi
	    fi

	    chmod 600 $BBKEY || true

	    # SSL stuff
	    if [ ! -z "$ACCOUNT" ]; then
		if [ ! -e $BBPRIVKEY -a ! -e $BBCERT ]; then
		    db_get boxbackup-client/generateCertificate

		    if [ "$RET" = "true" ]; then
			if ! openssl genrsa -out $BBPRIVKEY 2048 >&2; then
			    echo "Private key generation failed! Check why." >&2
			else
			    chmod 600 $BBPRIVKEY || true
			fi


			if ! openssl req -new -key $BBPRIVKEY -sha1 -out $BBCERTREQ >&2 <<__EOF
.
.
.
.
.
BACKUP-$ACCOUNT
.
.
.
__EOF
			then
			    echo "Certificate request generation failed ! Check why." >&2
			fi
		    fi
		fi
	    fi

	    # Generate notify script
	    CLIENTNAME=`hostname --fqdn`

	    db_get boxbackup-client/notifyMail
	    MAILTO=$RET

	    cat >>$DEBCONFNOTIFY <<__EOF
#!/bin/sh
#To reconfigure boxbackup-client run #dpkg-reconfigure boxbackup-client
SUBJECT="BACKUP PROBLEM on host $CLIENTNAME"
SENDTO="$MAILTO"

if [ \$1 = store-full ]
then
sendmail \$SENDTO <<EOM
Subject: \$SUBJECT (store full)
To: \$SENDTO


The store account for $CLIENTNAME is full.

=============================
FILES ARE NOT BEING BACKED UP
=============================

Please adjust the limits on account $account_num on server $server.

EOM
elif [ \$1 = read-error ]
then
sendmail \$SENDTO <<EOM
Subject: \$SUBJECT (read errors)
To: \$SENDTO


Errors occured reading some files or directories for backup on $CLIENTNAME.

===================================
THESE FILES ARE NOT BEING BACKED UP
===================================

Check the logs on $CLIENTNAME for the files and directories which caused
these errors, and take appropraite action.

Other files are being backed up.

EOM
else
sendmail \$SENDTO <<EOM
Subject: \$SUBJECT (unknown)
To: \$SENDTO


The backup daemon on $CLIENTNAME reported an unknown error.

==========================
FILES MAY NOT BE BACKED UP
==========================

Please check the logs on $CLIENTNAME.

EOM
fi
__EOF

	    if [ -x "`which ucf`" ]; then
		ucf --three-way --debconf-ok $DEBCONFBB $BBCONF
	    fi
	    rm -f $DEBCONFBB
	    chmod 644 $BBCONF || true
	    chown root:root $BBCONF || true

	    if [ -x "`which ucf`" ]; then
		ucf --three-way --debconf-ok $DEBCONFNOTIFY $NOTIFYSCRIPT
	    fi
	    rm -f $DEBCONFNOTIFY
	    chmod 755 $NOTIFYSCRIPT || true
	    chown root:root $NOTIFYSCRIPT || true
	fi
    ;;

    abort-upgrade|abort-remove|abort-deconfigure)
    ;;

    *)
	echo "postinst called with unknown argument \`$1'" >&2
	exit 1
    ;;
esac

db_stop

# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.

# Automatically added by dh_installinit
if [ -x "/etc/init.d/boxbackup-client" ]; then
	if [ ! -e "/etc/init/boxbackup-client.conf" ]; then
		update-rc.d boxbackup-client defaults >/dev/null
	fi
	invoke-rc.d boxbackup-client start || exit $?
fi
# End automatically added section


exit 0