xen-tools 4.4-1 / usr / bin / xen-create-image

#!/usr/bin/perl -w

=encoding utf8

=head1 NAME

xen-create-image - Easily create new Xen instances with networking and OpenSSH.

=head1 SYNOPSIS

xen-create-image --hostname=<hostname> <further options>


=head1 EXAMPLES

xen-create-image --hostname=some-domu --dist=wheezy --lvm=vg0

xen-create-image --hostname=some-domu --dist=precise --dir=/srv/xen

See below for more specific examples: LOOPBACK EXAMPLES, LVM EXAMPLE
and EVMS EXAMPLE.


=head1 OPTIONS

  Help Options:

   --help        Show the help information for this script.

   --manual      Read the manual, and examples, for this script.

   --(no)verbose (Don't) show more of what xen-create-image is
                 currently doing.

   --dumpconfig  Show current configuration.

   --version     Show the version number and exit.



  Size / General options:

   --(no)accounts
                (Don't) copy all non-system accounts to the guest
                image

   --admins     Specify that some administrators should be created for
                this image, using xen-shell.

   --(no)boot   (Don't) boot the new instance after creating it.

   --cache=bool Cache .deb files on the host when installing the new
                guest with the debootstrap tool. Accepted values:
                "yes" (default) and "no".

   --cachedir=/path/to/cache/directory
                Override the default .deb cache directory. Defaults to
                /var/cache/apt/archives/ if it exists (i.e. on Debian
                and Ubuntu) and /var/cache/xen-tools/archives/ else
                (i.e. on Fedora and CentOS).

   --config=file
                Read the specified file in addition to the global
                configuration file.

   --(no)copyhosts
                (Don't) copy entries from the dom0's /etc/hosts file
                to the guest

   --copy-cmd   NOP:  Ignored.

   --debootstrap-cmd=/path/to/command
                Specify which debootstrap command is used. Defaults to
                debootstrap if both, debootstrap and cdebootstrap are
                installed. Specifying the path is optional.

   --disk_device=diskname
                Use specified device name for virtual devices instead
                of the default value "xvda".

   --extension=ext
                Specify the suffix to give the Xen configuration
                file. (Default value: ".cfg")

   --(no)force  (Don't) force overwriting existing images. This will
                remove existing images or LVM volumes which match
                those which are liable to be used by the new
                invocation.

   --fs=fs      Specify the filesystem type to use for the new guest.
                Valid choices are 'ext2', 'ext3', 'ext4', 'reiserfs',
                'xfs' or 'btrfs'. (Note: pygrub *DOES NOT* support
                xfs)

   --genpass=1  Generate a random root password (default, set to 0 to
                turn off)

   --genpass_len=N
                Override the default password length of 8 and generate
                a random password of length N. Note: this only works
                in conjunction with --genpass

   --hash_method=algorithm
                Override the default hashing method of sha256 and use
                the provided algorithm. Can be : md5, sha256 or sha512

   --hooks=1    Specify whether to run hooks after the image is created.

   --ide        Use IDE names for virtual devices (i.e. hda not xvda)

   --image=str  Specify whether to create "sparse" or "full" disk
                images.  Full images are mandatory when using LVM, so
                this setting is ignored in that case.

   --image-dev=/path/to/device
                Specify a physical/logical volume for the disk image.

   --initrd=/path/to/initrd
                Specify the initial ramdisk. If an image is specified
                it must exist.

   --install=1  Specify whether to install the guest system or not.

   --(no)keep   (Don't) keep our images if installation fails. It
                maybe unmounted, though.

   --kernel=/path/to/kernel
                Set the path to the kernel to use for domU. If a
                kernel is specified it must exist.

   --memory=size
                Setup the amount of memory allocated to the new
                instance.  As suffix recognized size units are "M",
                "MB", "G" and "GB" (case does not matter). If there's
                no unit given, megabytes are assumed.

   --maxmem=size
                Setup the maximum amount of memory that can be allocated
                to the new instance. As suffix recognized size units are "M",
                "MB", "G" and "GB" (case does not matter). If there's
                no unit given, megabytes are assumed.
                Required for dynamic memory ballooning.

   --modules=/path/to/modules
                Set the path to the kernel modules to use for domU.
                If modules are specified they must exist.

   --nohosts    Don't touch /etc/hosts on the dom0.

   --noswap     Do not create a swap partition. When this option is
                used the system will not have a swap entry added to
                its /etc/fstab file either.

   --no-xen-ok  Don't complain if xen seems not installed or xend is
                not running. (Needed for the testsuite.)

   --output=dir Specify the output directory to create the xen
                configuration file within.

   --partitions=file
                Use a specific partition layout configuration file.
                See /etc/xen-tools/partitions.d/sample-server for an
                example partitioning configuration.  Not supported
                with the image-dev and swap-dev options.  Parameters
                fs, size, swap and noswap are ignored when using this
                option.

   --password=passphrase
                Set the root password for the new guest.

   --(no)passwd (Don't) ask for a root password interactively during
                setup.  NOTE: This overrides --genpass --password.

   --(no)pygrub DomU should (not) be booted using pygrub.

   --role=role  Run the specified role script(s) post-install.  Role
                scripts are discussed later in this manpage.  Can be
                an absolute path. Otherwise it's relative to the value
                of --roledir.

   --role-args="--arg1 --arg2"
                Pass the named string literally to any role script.
                This is useful for site-specific roles.

   --finalrole=role
                Similar to role scripts. Run the specified role
                script(s) after cfg file creation.

   --roledir=/path/to/directory
                Specify the directory which contains the role scripts.
                This defaults to /etc/xen-tools/role.d/

   --scsi       Use SCSI names for virtual devices (i.e. sda not xvda)

   --serial_device=serialname
                Install a getty on the specified serial device instead
                of the default device.

   --size=size  Set the size of the primary disk image.

   --swap=size  Set the size of the swap partition.

   --swap-dev=/path/to/device
                Specify a physical/logical volume for swap usage.

   --tar-cmd    NOP: Ignored.

   --dontformat Do not format the devices specified for installation.
                Useful if you want tighter control over the filesystem
                creation. Requires the filesystems to be created
                beforehand.

   --vcpus=num
                Set the number of vcpus that the new instance will
                have instead of the default value of "1".



  Installation options:

   --arch=arch  Pass the given architecture to debootstrap, rinse, or
                rpmstrap when installing the system.  This argument is
                ignored for other install methods.

   --dist=dist  Specify the distribution you wish to install.

   --install-method=method
                Specify the installation method to use. Valid methods
                are:

                * debootstrap
                * cdebootstrap
                * rinse
                * rpmstrap (deprecated)
                * tar (needs --install-source=tarball.tar)
                * copy (needs --install-source=/path/to/copy/from)

                (Default value for Debian and Ubuntu: debootstrap)

   --install-source=/path/to/tarball
                Specify the source path to use when installing via
                a copy or tarball installation.

   --mirror=url Setup the mirror to use when installing via
                debootstrap. (Default value: mirror used in
                /etc/apt/sources.list or for Debian
                "http://http.debian.net/debian/" and for Ubuntu
                "http://archive.ubuntu.com/ubuntu/")

                The above mentioned Debian mirror hostname
                automatically tries to choose a more or less close
                Debian mirror. See http://http.debian.net/ for
                details.

   --apt_proxy=protocol://hostname:port/
                Specify a proxy to be used by debootstrap, and within
                the guest. Needs the same syntax as APT's
                Acquire::http::Proxy. See apt.conf(5).

   --template=tmpl
                Specify which template file to use when creating the
                Xen configuration file.



  Networking options:

   --bridge=brname
                Optionally, set a specific bridge for the new
                instance.  This can be especially useful when running
                multiple bridges on a dom0.

   --broadcast=123.456.789.ABC
                Setup the broadcast address for the new instance.

   --(no)dhcp   The guest will (not) be configured to fetch its
                networking details via DHCP.

   --gateway=gw Setup the network gateway for the new instance.

   --ip=123.456.789.ABC
                Setup the IP address of the machine, multiple IPs are
                allowed.  When specifying more than one IP the first
                one is setup as the "system" IP, and the additional
                ones are added as aliases.

                Note that Xen 3.x supports a maximum of three vif
                statements per guest. This option conflicts with
                --dhcp.

   --mac=AA:BB:CC:DD:EE:FF
                Specify the MAC address to use for a given interface.
                This is only valid for the first IP address specified,
                or for DHCP usage.  (ie. you can add multiple --ip
                flags, but the specific MAC address will only be used
                for the first interface.)

   --netmask=123.456.789.ABC
                Setup the netmask for the new instance.

   --nameserver="123.456.789.ABC 123.456.789.DEF"
                Setup the nameserver of the machine, multiple space
                separated nameservers are allowed.  If not provided,
                Dom0's /etc/resolv.conf will be copied to guest.

   --vifname=vifname
                Optionally, set a specific vif name for the new
                instance.



  Mandatory options:

   --dir=/path/to/directory

                Specify where the output images should go.
                Subdirectories will be created for each guest.

                If you do not wish to use loopback images specify
                --lvm or --evms.  (These three options are mutually
                exclusive.)

   --evms=lvm2/container
                Specify the container to save images within,
                i.e. '--evms lvm2/mycontainer'.  If you do not wish to
                use EVMS specify --dir or --lvm.  (These three options
                are mutually exclusive.)

   --hostname=host.example.org
                Set the hostname of the new guest system.  Ideally
                this will be fully-qualified since several of the hook
                scripts will expect to be able to parse a domain name
                out of it for various purposes.

   --lvm=vg     Specify the volume group to save images within.
                If you do not wish to use LVM specify --dir or --evms.
                (These three options are mutually exclusive.)


=head1 NOTES

  This script is a wrapper around three distinct external tools which
 complete various aspects of the new system installation.

=over 8

=item B<xt-install-image>
Install a new distribution.

=item B<xt-customize-image>
Run a collection of hook scripts to customise the freshly installed system.

=item B<xt-create-xen-config>
Create a Xen configuration file in so that xm/xl can start the new domain.

=back

  The result of invoking these three scripts, and some minor glue between
 them, is a simple means of creating new Xen guest domains.


=head1 DESCRIPTION

  xen-create-image is a simple script which allows you to create new
 Xen instances easily.  The new image will be given two volumes.  These
 volumes will be stored upon the host as either loopback files, or
 LVM logical volumes:

   1.  An image for the systems root disk.
   2.  An image for the systems swap device.

  The new virtual installations will be configured with networking,
 have OpenSSH installed upon it, and have most of its basic files
 setup correctly.

  If you wish you can configure arbitrary partitioning schemes, rather
 than being restricted to just the two standard volumes.  For more
 details on this please see the later section in this manual "PARTITIONING".

  If you wish to install additional packages or do any additional
 configuration of your new guests, please read the section on "ROLES".


=head1 CONFIGURATION

  To reduce the length of the command line each of the supported options
 may be specified inside a configuration file.

  The global configuration file read for options is:

     /etc/xen-tools/xen-tools.conf

  The configuration file may contain comments which begin with the
 hash '#' character.  Otherwise the format is 'key = value'.

  A sample configuration file would look like this:

=for example begin

  #
  #  Output directory.  Images are stored beneath this directory, one
  # subdirectory per hostname.
  #
  dir = /home/xen

  #
  #  LVM users should disable the 'dir' setting above, and instead
  # specify the name of the volume group to use.
  #
  # lvm = myvolume

  #
  #  EVMS users should disable the dir setting above and instead specify
  # a container.  For example, if you have an lvm2 container named box,
  # put lvm2/box.  This is how it is named in the evms interface.
  #
  #  Warning... this has not been tested with anything but lvm2 but should
  # be generalizable.
  #
  # evms= lvm2/myvolume

  #
  #  Disk and Sizing options.
  #
  size       = 2Gb      # Disk image size.
  image      = full     # Allocate the full disk size immediately.
  memory     = 128Mb    # Memory size
  maxmem     = 512Mb    # Memory size
  swap       = 128Mb    # Swap size
  fs         = ext3     # use EXT3 filesystems
  dist       = stable   # Default distribution to install.

  #
  # Kernel options.
  #
  kernel      = /boot/vmlinuz-`uname -r`
  initrd      = /boot/initrd.img-`uname -r`

  #
  # Networking options.
  #
  gateway    = 192.168.1.1
  broadcast  = 192.168.1.255
  netmask    = 255.255.255.0


  #
  # Installation method:
  # One of "copy", "debootstrap", "cdebootstrap", "rinse", "rpmstrap", or "tar".
  #
  install-method = debootstrap

=for example end

  Using this configuration file a new image may be created with the
 following command:

      xen-create-image --hostname=vm03.my.flat --ip=192.168.1.201

  This makes use of loopback images stored beneath /home/xen and
 will be installed via the debootstrap command.


=head1 NETWORKING AUTO-SETUP

  We've already seen how the "gateway" and "netmask" options can
 be used to specify the networking options of the freshly created
 Xen guests.

  One other useful shortcut is the use of an automatic IP address.
 You can specify '--ip=auto' and the system will choose and use
 an IP address from those listed in /etc/xen-tools/ips.txt.

  For example if you wished to have Xen guests automatically
 take an address from the range 192.168.1.100-192.168.1.200 you
 would first prepare the system by running this:

=for example start

  rm /etc/xen-tools/ips.txt
  for i in $(seq 100 200) ; do echo 192.168.1.$i >> /etc/xen-tools/ips.txt ; done

=for example end

  Now you can create a guest with the command:

=for example start

  xen-create-image --ip=auto --hostname=blah [--dist=...]

=for example end

  The first time this ran the machine would receive an IP address
 from the pool which we've created.  This IP would be marked as used,
 and would no longer be available.  If all the IP addresses are taken
 then the system will fail.


=head1 PARTITIONING

  By default all new guests are created with two "volumes", one
 for the root filesystem and one for the new system's swap.

  If you wish you may specify an alternative partitioning scheme.
 Simply create a file inside the directory /etc/xen-tools/partitions.d/
 specifying your partition layout.  (Use the existing file "sample-server"
 as a template).

  Now when you create a new image specify the name of this file with as
 an argument to the --partition option.


=head1 XEN CONFIGURATION FILE

  Once a new image has been created an appropriate configuration file
 for Xen will be saved in the directory /etc/xen by default.  However
 you may change the output directory with the --output flag.

  The configuration file is built up using the template file
 /etc/xen-tools/xm.tmpl - which is a file processed via
 the Text::Template perl module.

  If you wish to modify the files which are generated please make your
 changes to that input file.

  Alternatively you can create multiple configuration files and
 specify the one to use with the --template option.


=head1 LOOPBACK EXAMPLES

  The following will create a 2Gb disk image, along with a 128Mb
 swap file with Debian Stable setup and running via DHCP.

     xen-create-image --size=2Gb --swap=128Mb --dhcp --dist=stable \
          --dir=/home/xen --hostname=vm01.my.flat

  This next example sets up a host which has the name 'vm02.my.flat' and
 IP address 192.168.1.200, with the gateway address of 192.168.1.1

     xen-create-image --size=2Gb --swap=128Mb \
          --ip=192.168.1.200 \
          --netmask=255.255.255.0
          --gateway=192.168.1.1 \
          --nameserver=192.168.1.1 \
          --dir=/home/xen --hostname=vm02.my.flat

  The directory specified for the output will be used to store the volumes
 which are produced.  To avoid clutter each host will have its images
 stored beneath the specified directory, named after the hostname.

  For example the images created above will be stored as:

   $dir/domains/vm01.my.flat/
   $dir/domains/vm01.my.flat/disk.img
   $dir/domains/vm01.my.flat/swap.img

   $dir/domains/vm02.my.flat/
   $dir/domains/vm02.my.flat/disk.img
   $dir/domains/vm02.my.flat/swap.img

  The '/domains/' subdirectory will be created if necessary.


=head1 LVM EXAMPLE

  If you wish to use an LVM volume group instead of a pair of loopback
 images as shown above you can instead use the --lvm argument to
 specify one.

     xen-create-image --size=2Gb --swap=128Mb --dhcp \
          --lvm=myvolumegroup --hostname=vm01.my.flat

  The given volume group will have two new logical volumes created within it:

   ${hostname}-swap
   ${hostname}-disk

  The disk image may be mounted, as you would expect, with the following
 command:

    mkdir -p /mnt/foo
    mount /dev/myvolumegroup/vm01.my.flat-disk /mnt/foo


=head1 EVMS EXAMPLE

  If you wish to use an EVMS storage container instead of a pair of loopback
 images as shown above you can instead use the --evms argument to
 specify one.  The below example assumes an lvm2 container.

     xen-create-image --size=2Gb --swap=128Mb --dhcp \
          --evms=lvm2/myvolumegroup --hostname=vm01.my.flat

  The given storage container will have two new EVMS volumes created within it:

   ${hostname}-swap
   ${hostname}-disk

  The disk image may be mounted, as you would expect, with the following
 command:

    mkdir -p /mnt/foo
    mount /dev/evms/vm01.my.flat-disk /mnt/foo


=head1 INSTALLATION METHODS

  The new guest images may be installed in several different ways:

  1.  Using the [c]debootstrap command, which must be installed and present.
  2.  Using the rpmstrap command, which must be installed and present.
  3.  using the rinse command, which must be installed and present.
  4.  By copying an existing installation.
  5.  By untarring a file containing a previous installation.

  These different methods can be selected by either the command line
 arguments, or settings in the configuration file.  Only one installation
 method may be specified at a time; they are mutually-exclusive.


=head1 INSTALLATION SPEEDUPS

  After performing your first installation you can customize it, or
 use it untouched, as a new installation source.  By doing this you'll
 achieve a significant speedup, even above using the debootstrap caching
 support.

  There are two different ways you can use the initial image as source
 for a new image:

  1.  By tarring it up and using the tar-file as an installation source.
  2.  By mounting the disk image of the first system and doing a literal copy.

  Tarring up a pristine, or customised, image will allow you to install
 with a command such as:

     xen-create-image --size=2Gb --swap=128Mb --dhcp \
          --lvm=myvolumegroup --hostname=vm01.my.flat \
          --install-method=tar --install-source=/path/to/tar.file.tar

  The advantage of the tarfile approach is that you'll not need to
 keep a disk image mounted if you were to use the --copy argument
 to create a new image using the old one as source:

     xen-create-image --size=2Gb --swap=128Mb --dhcp \
          --lvm=myvolumegroup --hostname=vm01.my.flat \
          --install-method=copy --install-source=/path/to/copy/from


=head1 DEBOOTSTRAP CACHING

  When installing new systems with the debootstrap tool there is
 a fair amount of network overhead.

  To minimize this the .deb files which are downloaded into the
 new instance are cached by default upon the host, in the directory
 /var/cache/apt/archives or, if this does not exist, in
 /var/cache/xen-tools/archives. This can be overridden with the
 --cache-dir command-line and configuration option.

  This feature can be disabled with the command line flag --cache=no,
 or by the matching setting in the configuration file.

  When a new image is created these packages are copied into the new
 image - before the debootstrap process runs - this should help avoid
 expensive network reading.

  If you wish to clean the host's apt cache (/var/cache/apt/archivees)
 you may do so with apt-get, namely:

  apt-get clean

  If you set your cache directory to anything else, simply rm the
 contents of the directory.


=head1 ROLES

  Currently there are some roles scripts included which work for
 the Debian and Ubuntu distrubtions only. They are included
 primarily as examples of the kind of things you could accomplish.

  The supplied scripts are:

=over 8

=item builder
Setup the new virtual images with commonly used packages for rebuilding
Debian packages from their source.

=item cfengine
Install cfengine2 on the virtual image and copy the cfengine
configuration from Dom0.

=item editor
Allows generalised editing of files for guests.

This script works via a skeleton directory containing small sed files
which will contain edits to be applied to an arbitrary tree of files
upon the new domU.

For example if we have the following sed file:

  /etc/xen-tools/sed.d/etc/ssh/sshd_config.sed

this will be applied to /etc/ssh/sshd_config upon the new guest *if*
it exists.  If the file encoded in the name doesn't exist then it will
be ignored.

=item gdm
Install an X11 server, using VNC and GDM

=item minimal
Customise the generated images to remove some packages.

=item puppet
Install puppet on the virtual image and copy the cfengine
configuration from Dom0.

=item tmpfs
Sets up /tmp, /var/run and /var/lock as tmpfs in the DomU.

=item udev
Install udev in the DomU. Most distributions install udev by default
nowadays, so this role is probably only interesting for legacy systems
which need udev anyway.

=item xdm
Install an X11 server, using VNC and XDM

=back

  If you'd like to include your own role scripts you'll need to
 create a file in /etc/xen-tools/role.d, and then specify the
 name of that file with "--role=filename".  Additionally you
 may pass options to your role-script with the --role-args
 flag.

  For example the script /etc/xen-tools/role.d/gdm would be used
 by executing with "--role=gdm".

  Role scripts are invoked with the directory containing the
 installed system as their first argument, and anything passed
 as a role-arg will be passed allong as additional arguments.

  NOTE: Role scripts are invoked before the config file generation.
        If you need access to the config file from within your role,
        use --finalrole.
  NOTE: Multiple role scripts may be invoked if you separate their
 names with commas.


=head1 THE SKELETON DIRECTORY

  Any files present in the directory /etc/xen-tools/skel will be copied
 across to each new guest image.  The role of this directory is analogous
 to the /etc/skel directory.

  A typical use for this would be to copy a public key across to each
 new system.  You could do this by running:

=for example start

    mkdir -p /etc/xen-tools/skel/root/.ssh
    chmod -R 700 /etc/xen-tools/skel/root
    cp /root/.ssh/id_rsa.pub /etc/xen-tools/skel/root/.ssh/authorized_keys2
    chmod 644 /etc/xen-tools/skel/root/.ssh/authorized_keys2

=for example cut


=head1 AUTHORS

 Steve Kemp, http://www.steve.org.uk/
 Axel Beckert, http://noone.org/abe/
 Dmitry Nedospasov, http://nedos.net/
 Stéphane Jourdois


=head1 LICENSE

Copyright (c) 2005-2009 by Steve Kemp, (c) 2010-2013 by The Xen-Tools
Development Team. All rights reserved.

This module is free software;
you can redistribute it and/or modify it under
the same terms as Perl itself.
The LICENSE file contains the full text of the license.

=cut

$SIG{INT} = \&clean_up;

use strict;
use English;
use Digest::MD5 qw/ md5_hex /;
use Env;
use File::Path qw/ mkpath /;
use File::Temp qw/ tempdir /;
use File::Copy qw/ mv cp /;
use File::Which;
use Getopt::Long;
use Pod::Usage;
use Data::Dumper;
use Data::Validate::URI qw/ is_uri /;
use Data::Validate::IP qw/ is_ipv4 /;
use Data::Validate::Domain qw/ is_hostname /;
use Term::UI;
use Term::ReadLine;
use Xen::Tools::Common;


#
#  Configuration values read initially from the global configuration
# file, then optionally overridden by the command line.
#
my %CONFIG;


#
#  Partition layout information values read from the partitions file,
# or constructed automatically if no partitions file is specified.
#
my @PARTITIONS = undef;


#
#  Global variable containing the temporary file where our image
# is mounted for installation purposes.
#
#  Why is this here?
#
#  Well it makes sure that the magic "END" section can unmount it
# if there are errors.
#
#
my $MOUNT_POINT = undef;


#
# Release number.
#
my $RELEASE = '4.4';


#
# Variable for ip addresses for output
#
my $IP_ADDRESSES = '';


#
# Variable for generated password
#
my $PASSWORD = '';



# Minor helpers for reducing code duplication
sub fail     ($) { fail_with_config($_[0], \%CONFIG); }
sub logprint ($) { logprint_with_config($_[0], \%CONFIG); }

#
#  Setup default options.
#
setupDefaultOptions();


#
#  Read the global configuration file.
#
readConfigurationFile("/etc/xen-tools/xen-tools.conf", \%CONFIG);


#
#  Parse the command line arguments.
#
parseCommandLineArguments();


#
#  If we received an additional configuration file then read it.
#
if ( $CONFIG{ 'config' } )
{
    my $path = $CONFIG{ 'config' };

    # If not fully-qualified then read from /etc/xen-tools.
    if ( $path !~ /^[\/]/ )
    {
        $path = "/etc/xen-tools/" . $path;
    }

    # Read the file, if it exists.
    if ( -e $path )
    {
        readConfigurationFile($path, \%CONFIG);
    }
    else
    {
        logprint( "The specified configuration file does not exist: '$path'\n".
                  "Aborting\n\n" );
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }
}


#
#  Process --debug
#
if ( $CONFIG{ 'debug' } )
{
    foreach my $key ( sort keys %CONFIG )
    {
        print $key;
        print " : " . $CONFIG{ $key } if ( $CONFIG{ $key } );
        print "\n";
    }
    $CONFIG{'FAIL'} = 1;
    exit 127;
}



#
#  Check the environment - after parsing arguments.
#
#  This is required so that the "--help" flag will work even if our support
# scripts are not installed, etc.
#
checkSystem();


#
#  Ensure we're started by root at this point.  This is required
# to make sure we can create new LVM volumes, mount loopback images, or
# carry out other privileged actions.
#
testRootUser();


#
#  Check our arguments were sane and complete.
#
checkArguments();


#
#  Make sure we have a log directory
#
setupLogFile();


#
#  Check we have binaries installed which we expect to use.
#
checkBinariesPresent();


#
#  Setup default partitioning scheme if we don't have one.
#
#  NOTE:  This must be done before we call "showSummary".
#
if ( !$#PARTITIONS )
{
    populatePartitionsData()
      if ( ( $CONFIG{ 'dir' } ) ||
           ( $CONFIG{ 'evms' } ) ||
           ( $CONFIG{ 'lvm' } ) );
}


#
#  Show a summary of what we're going to do.
#
showSummary();



#
#  Create and format the images if we're using loopback filesystems.
#
if ( $CONFIG{ 'dir' } )
{

    #
    #  Test to see if "loop" module is loaded.  This is probably
    # not required, except for paranoia.
    #
    testLoopbackModule();

    #
    #  Create disk + swap images.
    #
    createLoopbackImages();
}
elsif ( $CONFIG{ 'lvm' } )
{

    #
    #  Create our LVM partitions.
    #
    createLVMBits();
}
elsif ( $CONFIG{ 'evms' } )
{

    #
    #  Create our EVMS partitions.
    #
    createEVMSBits();
}
elsif ( $CONFIG{ 'image-dev' } )
{

    #
    #  Use physical disc
    #
    usePhysicalDevice();
}
else
{

    # Can't happen we didn't get an installation type.
    logprint( "Error:  No recognised installation type.\n".
              "Please specify a directory, lvm, or evms volume to use.\n" );
    $CONFIG{'FAIL'} = 1;
    exit 127;
}


#
#  Mount the image.
#
mountImage();


#
#  Export our environment for the hooks/role script we might be
# running later.
#
#  Do this unconditionally now, so that we're all setup to run
# a hook even if we're not installing a system.
#
exportEnvironment();


#
#  If we're installing then do so, and test that it worked with
# a binary name that is reasonably likely to exist under any
# distribution of GNU/Linux.
#
if ( $CONFIG{ 'install' } )
{

    #
    #  Install the system.
    #
    installSystem();

    #
    #  Did that work?
    #
    if ( !-x $MOUNT_POINT . "/bin/ls" )
    {
        logprint("System installation failed: /bin/ls missing.  Aborting.\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    #
    #  Now customize the installation - setting up networking, etc.
    #
    if ( $CONFIG{ 'hooks' } )
    {
        runCustomisationHooks();
    }
}



#
#  Run any specified role scripts.
#
runRoleScripts( $CONFIG{ 'role' } );


#
#  Create the Xen configuration file.
#
runXenConfigCreation();


#
#  Run any specified role scripts.
#
runRoleScripts( $CONFIG{ 'finalrole' } );


#
#  Setup the password if the user wanted that.
#
setupRootPassword() if ( $CONFIG{ 'passwd' } or $CONFIG{ 'genpass' } or $CONFIG{ 'password' });


#
#  Report success.
#
logprint("All done\n");


#
#  Finished.
#
exit 0;



=begin doc

  Test that this system is fully setup for the new xen-create-image
 script.

  This means that the the companion scripts xt-* are present on the
 host and executable.

=end doc

=cut

sub checkSystem
{
    #
    #  Make sure that we have Text::Template installed - this
    # will be used by `xt-create-xen-config` and if that fails then
    # running is pointless.
    #
    my $test = "use Text::Template";
    eval($test);
    if ( ($@) && ( !$CONFIG{ 'force' } ) )
    {
        print <<E_O_ERROR;

  Aborting:  The Text::Template perl module isn\'t installed or available.

  Specify '--force' to skip this check and continue regardless.

E_O_ERROR
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }



    #
    #  Check that all the binaries have been installed properly
    #
    my @required =
      qw(xt-customize-image xt-install-image xt-create-xen-config);

    foreach my $bin (@required)
    {
        if ( !defined( which($bin) ) )
        {
            logprint( "The script '$bin' was not found.\nAborting\n\n" );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }

    #
    #  Make sure that xen-shell is installed if we've got an --admin
    # flag specified
    #
    if ( $CONFIG{ 'admins' } )
    {
        my $shell = undef;
        $shell = "/usr/bin/xen-login-shell"
          if ( -x "/usr/bin/xen-login-shell" );
        $shell = "/usr/local/bin/xen-login-shell"
          if ( -x "/usr/bin/local/xen-login-shell" );

        if ( !defined($shell) )
        {
            print <<EOF;

  You've specified administrator accounts for use with the xen-shell,
 however the xen-shell doesn't appear to be installed.

  Aborting.
EOF
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }


    #
    #  Test the system has a valid (network-script) + (vif-script) setup.
    #
    testXenConfig();

}



=begin doc

  Test that the current Xen host has a valid network configuration,
 this is designed to help newcomers to Xen.

=end doc

=cut

sub testXenConfig
{

    # wierdness.
    return if ( !-d "/etc/xen" );

    #
    #  Temporary hash.
    #
    my %cfg;

    #
    # Read the configuration file.
    #
    open( CONFIG, "<", "/etc/xen/xend-config.sxp" ) or
      fail("Failed to read /etc/xen/xend-config.sxp: $!");
    while (<CONFIG>)
    {
        next if ( !$_ || !length($_) );

        # vif
        if ( $_ =~ /^\(vif-script ([^)]+)/ )
        {
            $cfg{ 'vif-script' } = $1;
        }

        # network
        if ( $_ =~ /^\(network-script ([^)]+)/ )
        {
            $cfg{ 'network-script' } = $1;
        }
    }
    close(CONFIG);

    if ( !defined( $cfg{ 'network-script' } ) ||
         !defined( $cfg{ 'vif-script' } ) )
    {
        print <<EOF;

WARNING
-------

  You appear to have a missing vif-script, or network-script, in the
 Xen configuration file /etc/xen/xend-config.sxp.

  Please fix this and restart Xend, or your guests will not be able
 to use any networking!

EOF
    }
    else
    {
        if ( ( $cfg{ 'network-script' } =~ /dummy/i ) ||
             ( $cfg{ 'vif-script' } =~ /dummy/i ) )
        {

            print <<EOF;
WARNING
-------

  You appear to have a "dummy" vif-script, or network-script, setting
 in the Xen configuration file /etc/xen/xend-config.sxp.

  Please fix this and restart Xend, or your guests will not be able to
 use any networking!

EOF
        }
    }
}



=begin doc

  Setup the default options we'd expect into our global configuration hash.

=end doc

=cut

sub setupDefaultOptions
{
    #
    #  This flag is set upon failure, after images have been created.
    #
    #  It is used so that we can automatically "rollback" upon failure.
    #
    $CONFIG{'FAIL'} = 0;

    #
    # Paths and files.
    #
    $CONFIG{ 'dir' }     = '';
    $CONFIG{ 'xm' }      = findXenToolstack();
    $CONFIG{ 'kernel' }  = '';
    $CONFIG{ 'modules' } = '';
    $CONFIG{ 'initrd' }  = '';
    $CONFIG{ 'serial_device' } = 'hvc0';
    $CONFIG{ 'disk_device' }   = 'xvda';

    #
    # Sizing options.
    #
    $CONFIG{ 'memory' } = '96Mb';
    $CONFIG{ 'size' }   = '2000Mb';
    $CONFIG{ 'swap' }   = '128M';
    $CONFIG{ 'cache' }  = 'yes';
    $CONFIG{ 'cachedir' }  = '/var/cache/apt/archives/';
    $CONFIG{ 'image' }  = 'sparse';
    $CONFIG{ 'vcpus' } = '1';

    #
    # Misc. options.
    #

    # Default distribution is Debian Stable
    $CONFIG{ 'dist' }          = 'stable';
    $CONFIG{ 'mirror' }        = '';

    # Initialize per distribution mirror defaults: Debian
    foreach my $debdist (qw(squeeze wheezy jessie sid testing oldstable stable unstable)) {
        $CONFIG{ 'mirror_'.$debdist } = 'http://http.debian.net/debian';
    }
    foreach my $debdist (qw(sarge etch lenny)) {
        $CONFIG{ 'mirror_'.$debdist } = 'http://http.debian.net/debian-archive/debian';
    }
    # Initialize per distribution mirror defaults: Ubuntu
    foreach my $ubuntudist (qw(lucid precise quantal raring saucy trusty)) {
        $CONFIG{ 'mirror_'.$ubuntudist } = 'http://archive.ubuntu.com/ubuntu';
    }
    foreach my $ubuntudist (qw(dapper edgy feisty gutsy hardy intrepid jaunty karmic maverick natty oneiric)) {
        $CONFIG{ 'mirror_'.$ubuntudist } = 'http://old-releases.ubuntu.com/ubuntu';
    }
    $CONFIG{ 'apt_proxy' }     = '';
    $CONFIG{ 'arch' }          =
        which('dpkg') ? `dpkg --print-architecture` : '';
    chomp($CONFIG{ 'arch' });
    $CONFIG{ 'fs' }            = 'ext3';
    $CONFIG{ 'force' }         = 0;
    $CONFIG{ 'no_xen_ok' }     = 0;
    $CONFIG{ 'install' }       = 1;
    $CONFIG{ 'hooks' }         = 1;
    $CONFIG{ 'partitions' }    = '';
    $CONFIG{ 'pid' }           = 0;
    $CONFIG{ 'template' }      = '';
    $CONFIG{ 'roledir' }       = '/etc/xen-tools/role.d';
    $CONFIG{ 'partitionsdir' } = '/etc/xen-tools/partitions.d';
    $CONFIG{ 'ipfile' }        = '/etc/xen-tools/ips.txt';
    $CONFIG{ 'output' }        = '/etc/xen';
    $CONFIG{ 'extension' }     = '.cfg';

    #
    #  Installation method defaults to "debootstrap" using
    #  "debootstrap" (instead of cdebootstrap).
    #
    $CONFIG{ 'install-method' } = 'debootstrap';
    $CONFIG{ 'debootstrap-cmd' } = '';

    #
    #  Default values for passwords
    #
    $CONFIG{ 'genpass' }     = 1;
    $CONFIG{ 'genpass_len' } = 8;
    $CONFIG{ 'password' }    = '';
    $CONFIG{ 'hash_method' } = 'sha256';

    #
    #  The program to run to create a filesystem.
    #
    # NOTE: These commands end in a trailing slash.  The last parameter is
    #       added as the loopback file/LVM volume to create the fs on....
    #
    # NOTE 2:  Each of these scripts will "force" the creation of a new
    #         filesystem, even if it exists.  This script must detect
    #         prior existance itself.
    #
    $CONFIG{ 'make_fs_ext2' }     = 'mkfs.ext2 -F';
    $CONFIG{ 'make_fs_ext3' }     = 'mkfs.ext3 -F';
    $CONFIG{ 'make_fs_ext4' }     = 'mkfs.ext4 -F';
    $CONFIG{ 'make_fs_xfs' }      = 'mkfs.xfs -f';
    $CONFIG{ 'make_fs_reiserfs' } = 'mkfs.reiserfs -f -q';
    $CONFIG{ 'make_fs_btrfs' }    = 'mkfs.btrfs';

    #
    #  Flags to pass to "mount" to mount our image.
    #
    #  NOTE: Kinda redundent and may go away since '-t auto' should do
    #        the right thing.
    #
    $CONFIG{ 'mount_fs_ext2' }     = '-t ext2';
    $CONFIG{ 'mount_fs_ext3' }     = '-t ext3';
    $CONFIG{ 'mount_fs_ext4' }     = '-t ext4';
    $CONFIG{ 'mount_fs_xfs' }      = '-t xfs';
    $CONFIG{ 'mount_fs_reiserfs' } = '-t reiserfs';
    $CONFIG{ 'mount_fs_btrfs' }    = '-t btrfs';

    #
    #  Network options.
    #
    $CONFIG{ 'nameserver' } = '';

}



=begin doc

  Validate options and do what is necessary with them.

=end doc

=cut

sub checkOption
{
    my ($option, $value) = @_;

    # Define argument types
    my %types = (
        integerWithSuffix => {
            check   => qr/^[0-9.]+[GM]B?$/i,
            message => "takes a suffixed (mb, MB, G, etc.) integer.\n",
        },
        distribution => {
            check   => sub { -d "/usr/share/xen-tools/$_[0].d" },
            message => "takes a distribution name " .
                       "(see /usr/share/xen-tools for valid values).\n",
        },
        imageType => {
            check   => qr/^sparse|full$/,
            message => "must be 'sparse' or 'full'.\n",
        },
        existingFile => {
            check   => sub { -e $_[0] },
            message => "must be an existing file.\n",
        },
        existingDir => {
            check   => sub { -d $_[0] },
            message => "must be an existing directory.\n",
        },
        serialDev => {
            check   => qr/^(?:\/dev\/)?(?:tty|[xh]vc)[0-9]+$/,
            message => "must be a serial device (tty[0-9]+, hvc[0-9]+ or xvc[0-9]+).\n",
        },
        diskDev => {
            check   => qr/^(?:\/dev\/)?(?:xvd|sd)[a-z]+$/,
            message => "must be a disk device (xvd[a-z]+, sd[a-z]+).\n",
        },
        ipv4 => {
            check   => sub { is_ipv4($_[0]) },
            message => "must be valid IPv4.\n",
        },
        ipv4_or_auto => {
            check   => sub { is_ipv4($_[0]) or $_[0] eq 'auto' },
            message => "must be valid IPv4 or the keyword 'auto'.\n",
        },
        hostname => {
            check   => sub { is_hostname($_[0]) },
            message => "must be a valid hostname.\n",
        },
        supportedFs => {
            check   => qr/^(ext[234]|xfs|reiserfs|btrfs)$/,
            message => "must be a supported filesystem (ext2, ext3, ext4, xfs, reiserfs or btrfs).\n",
        },
        yesNo => {
            check   => qr/^yes|no$/i,
            message => "must be 'yes' or 'no'.\n",
        },
        zeroOne => {
            check   => qr/^0|1$/i,
            message => "must be '0' or '1'.\n",
        },
        configFile => {
            check   => sub { -e $_[0] or -e "/etc/xen-tools/" . $_[0] },
            message => "must be an existing file.\n",
        },
        filename => {
            check   => qr/^[a-z0-9_.-]*$/,
            message => "must be a valid filename.\n",
        },
        mac => {
            check   => qr/^(?:[0-9a-f]{2}:){5}[0-9a-f]{2}$/i,
            message => "must be a valid ethernet mac address.\n",
        },
        hashMethod => {
            check   => qr/^md5|sha256|sha512$/i,
            message => "must be md5, sha256 or sha512.\n",
        },
        uri => {
            check   => sub { is_uri($_[0]) },
            message => "must be an URI including the protocol\n",
        },
    );

    # Define what argument each option accepts.
    # Arguments for options not listed here will always be accepted.
    my %optionsTypes = (
        size          => 'integerWithSuffix',
        dist          => 'distribution',
        swap          => 'integerWithSuffix',
        image         => 'imageType',
        memory        => 'integerWithSuffix',
        maxmem        => 'integerWithSuffix',
        kernel        => 'existingFile',
        initrd        => 'existingFile',
        modules       => 'existingDir',
        serial_device => 'serialDev',
        disk_device   => 'diskDev',
        gateway       => 'ipv4',
        netmask       => 'ipv4', # This is dubious.
        broadcast     => 'ipv4',
        hostname      => 'hostname',
        nameserver    => 'ipv4',
        pointopoint   => 'ipv4',
        fs            => 'supportedFs',
        cache         => 'yesNo',
        cachedir      => 'existingDir',
        config        => 'configFile',
        install       => 'zeroOne',
        hooks         => 'zeroOne',
        roledir       => 'existingDir',
        template      => 'configFile',
        output        => 'existingDir',
        extension     => 'filename',
        mac           => 'mac',
        ip            => 'ipv4_or_auto',
        hash_method   => 'hashMethod',
        apt_proxy     => 'uri',
    );

    # If given option does not exists in optionsTypes,
    # we just copy it to %CONFIG.
    unless ( exists $optionsTypes{ $option } ) {
        $CONFIG{ $option } = $value;
    } else { # we validate it before copying
        my $type = $optionsTypes{ $option };

        # First, check if type exists
        fail("Type $type does not exist") unless exists $types{ $type };
        my $check = $types{ $type }{ 'check' };

        if (
            (ref $check eq 'Regexp' and $value =~ $check) or
            (ref $check eq 'CODE' and &$check( $value ) )
        ) {
            # Option did validate, copy it
            if ( $option eq "ip" )
            {
              push @{ $CONFIG{ $option } }, $value;
            } else {
              $CONFIG{ $option } = $value;
            }
        } else {
            # Option did _not_ validate
            fail("ERROR: '$option' argument " . $types{ $type }{ 'message' });
        }
    }
}

=begin doc

  Parse the command line arguments this script was given.

=end doc

=cut

my $HELP       = 0;
my $MANUAL     = 0;
my $DUMPCONFIG = 0;
my $VERSION    = 0;

sub parseCommandLineArguments
{
    #
    #  We record the installation method here because we want
    # to ensure that we allow the method supplied upon the command line
    # to overwrite the one we might have ready read from the configuration
    # file.
    #
    my %install;
    $install{ 'evms' }      = undef;
    $install{ 'dir' }       = undef;
    $install{ 'lvm' }       = undef;
    $install{ 'image-dev' } = undef;

    #
    #  Parse options.
    #
    if (
        !GetOptions(

            # Mandatory
            "dist=s", \&checkOption,

            # Size options.
            "size=s",   \&checkOption,
            "swap=s",   \&checkOption,
            "noswap",   \&checkOption,
            "image=s",  \&checkOption,
            "memory=s", \&checkOption,
            "maxmem=s", \&checkOption,
            "vcpus=i",  \&checkOption,

            # Locations
            "dir=s",       \$install{ 'dir' },
            "evms=s",      \$install{ 'evms' },
            "kernel=s",    \&checkOption,
            "initrd=s",    \&checkOption,
            "mirror=s",    \&checkOption,
            "apt_proxy=s", \&checkOption,
            "modules=s",   \&checkOption,
            "lvm=s",       \$install{ 'lvm' },
            "image-dev=s", \$install{ 'image-dev' },
            "swap-dev=s",  \$install{ 'swap-dev' },
            "serial_device=s", \&checkOption,
            "disk_device=s", \&checkOption,

            # Hosts options
            "nohosts",     \$CONFIG{ 'nohosts' },
            "copyhosts!",  \$CONFIG{ 'copyhosts' },
            # Deprecated legacy options for backwards compatibility
            "no-hosts",    \$CONFIG{ 'nohosts' },
            "copy-hosts!", \$CONFIG{ 'copyhosts' },

            # Networking options
            "dhcp!",        \$CONFIG{ 'dhcp' },
            "bridge=s",     \&checkOption,
            "gateway=s",    \&checkOption,
            "hostname=s",   \&checkOption,
            "ip=s@",        \&checkOption,
            "mac=s",        \&checkOption,
            "netmask=s",    \&checkOption,
            "broadcast=s",  \&checkOption,
            "nameserver=s", \&checkOption,
            "vifname=s",    \&checkOption,
            "p2p=s",        \&checkOption,

            # Exclusive
            #
            #  NOTE:  We set the local variable here, not the global.
            #
            "install-method=s",  \$CONFIG{ 'install-method' },
            "install-source=s",  \$CONFIG{ 'install-source' },
            "debootstrap-cmd=s", \$CONFIG{ 'debootstrap-cmd' },

            # Misc. options
            "accounts!",    \$CONFIG{ 'accounts' },
            "admins=s",     \&checkOption,
            "arch=s",       \&checkOption,
            "fs=s",         \&checkOption,
            "boot!",        \$CONFIG{ 'boot' },
            "cache=s",      \&checkOption,
            "cachedir=s",   \&checkOption,
            "config=s",     \&checkOption,
            "ide",          \$CONFIG{ 'ide' },
            "scsi",         \$CONFIG{ 'scsi' },
            "install=i",    \&checkOption,
            "hooks=i",      \&checkOption,
            "pygrub!",      \$CONFIG{ 'pygrub' },
            "passwd!",      \$CONFIG{ 'passwd' },
            "genpass=i",    \&checkOption,
            "genpass-len=i", \&checkOption,
            "genpass_len=i", \&checkOption,
            "password=s",   \&checkOption,
            "hash_method=s",\&checkOption,
            "partitions=s", \&checkOption,
            "role=s",       \&checkOption,
            "role-args=s",  \&checkOption,
            "finalrole=s",       \&checkOption,
            "roledir=s",    \&checkOption,
            "force!",       \$CONFIG{ 'force' },
            "no-xen-ok",    \$CONFIG{ 'no_xen_ok' },
            "keep!",        \$CONFIG{ 'keep' },
            "template=s",   \&checkOption,
            "output=s",     \&checkOption,
            "extension:s",  \&checkOption,
            "dontformat",   \&checkOption,

            # Help options
            "debug!",     \$CONFIG{ 'debug' },
            "help",       \$HELP,
            "manual",     \$MANUAL,
            "dumpconfig", \$DUMPCONFIG,
            "verbose!",   \$CONFIG{ 'verbose' },
            "version",    \$VERSION
        ) )
    {
        $CONFIG{'FAIL'} = 2;
        exit;
    }

    if ( $HELP ) {
        $CONFIG{'FAIL'}=-1;
        pod2usage(1);
    }

    if ( $MANUAL ) {
        $CONFIG{'FAIL'}=-1;
        pod2usage( -verbose => 2 );
    }

    if ($VERSION)
    {
        logprint("xen-create-image release $RELEASE\n");
        exit 0;
    }


    #
    #  Now make ensure that the command line setting of '--lvm', '--evms'
    # and '--dir=x' override anything specified in the configuration file.
    #
    if ( $install{ 'dir' } )
    {
        $CONFIG{ 'dir' }       = $install{ 'dir' };
        $CONFIG{ 'evms' }      = undef;
        $CONFIG{ 'lvm' }       = undef;
        $CONFIG{ 'image-dev' } = undef;
    }
    if ( $install{ 'evms' } )
    {
        $CONFIG{ 'dir' }       = undef;
        $CONFIG{ 'evms' }      = $install{ 'evms' };
        $CONFIG{ 'lvm' }       = undef;
        $CONFIG{ 'image-dev' } = undef;
    }
    if ( $install{ 'lvm' } )
    {
        $CONFIG{ 'dir' }       = undef;
        $CONFIG{ 'evms' }      = undef;
        $CONFIG{ 'lvm' }       = $install{ 'lvm' };
        $CONFIG{ 'image-dev' } = undef;
    }
    if ( $install{ 'image-dev' } )
    {
        $CONFIG{ 'dir' }       = undef;
        $CONFIG{ 'evms' }      = undef;
        $CONFIG{ 'lvm' }       = undef;
        $CONFIG{ 'image-dev' } = $install{ 'image-dev' };
        $CONFIG{ 'size' }      = undef;
        $CONFIG{ 'swap' }      = undef;

        $CONFIG{ 'swap-dev' } = $install{ 'swap-dev' }
          if ( defined( $install{ 'swap-dev' } ) );
    }

    if ($DUMPCONFIG)
    {
        print Dumper \%CONFIG;
        exit 0;
    }
}



=begin doc

  Make sure this script is being run by a user with UID 0.

=end doc

=cut

sub testRootUser
{
    if ( $EFFECTIVE_USER_ID != 0 )
    {
        my $err = <<E_O_ROOT;

  In order to use this script you must be running with root privileges.

  (This is necessary to mount the disk images which are created.)

E_O_ROOT

        logprint($err);
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }
}



=begin doc

  Test that the command line arguments we were given make sense.

  Here we make sure that mutually exclusive options are not selected
 for the installation method, etc.

  We also warn when some variables are not set.

=end doc

=cut

sub checkArguments
{

    #
    #  We require a distribution name.
    #
    if ( !defined( $CONFIG{ 'dist' } ) )
    {
        logprint("The '--dist' argument is mandatory\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    #
    #  We require a hostname.
    #
    if ( !defined( $CONFIG{ 'hostname' } ) )
    {
        logprint("The '--hostname' argument is mandatory.\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    #
    #  Lucid and probably all later Ubuntus, too, don't work without pygrub
    #
    if ( $CONFIG{ 'dist' } =~ /lucid|maverick|natty|oneiric|precise|quantal|raring|saucy/ )
    {
        $CONFIG{ 'pygrub' } = 1;
    }

    #
    #  Sarge amd64 needs different default mirror
    #
    if ( $CONFIG{ 'dist' } =~ /sarge/ and
         $CONFIG{ 'arch' } =~ /amd64/ and
         $CONFIG{ 'mirror_sarge' } =~ m(/debian-archive/debian/?$))
    {
        $CONFIG{ 'mirror_sarge' } =~
            s(/debian-archive/debian/?)(/debian-archive/debian-amd64);
    }

    #
    #  If no mirror is set, use the default per-distro mirror
    #
    my $distMirror = "mirror_" . $CONFIG{ 'dist' };
    if ( !$CONFIG{ 'mirror' } and
         $CONFIG{ $distMirror } and
         length( $CONFIG{ $distMirror } ) )
    {
        $CONFIG{ 'mirror' } = $CONFIG{ $distMirror };
    }

    #
    #  NOTE: FAKE!
    #
    if ( $CONFIG{ 'dist' } eq 'fedora-core4' )
    {
        $CONFIG{ 'dist' } = 'stentz';
    }

    #
    #  If using LVM or EVMS then the images may not be sparse
    #
    $CONFIG{ 'image' } = "full"
      if ( $CONFIG{ 'lvm' } ||
           $CONFIG{ 'evms' } ||
           $CONFIG{ 'image-dev' } );



    #
    #  Make sure that our installation method is specified.
    #
    my $valid = 0;
    if ( defined( $CONFIG{ 'install-method' } ) )
    {
        foreach my $recognised (
                        qw/ copy debootstrap cdebootstrap rinse rpmstrap tar /)
        {
            $valid = 1
              if ( lc( $CONFIG{ 'install-method' } ) eq lc($recognised) );
        }

        #
        #  If we have "cdebootstrap", set it to "debootstrap" and set
        #  debootstrap-cmd to cdebootstrap instead.
        #
        if ( lc( $CONFIG{ 'install-method' } ) eq 'cdebootstrap' )
        {
            $CONFIG{ 'install-method' } = 'debootstrap';
            $CONFIG{ 'debootstrap-cmd' } = 'cdebootstrap';
        }

        #
        #  If we have "copy", or "tar" method then make sure we have a source.
        #
        if ( ( lc( $CONFIG{ 'install-method' } ) eq "copy" ) ||
             ( lc( $CONFIG{ 'install-method' } ) eq "tar" ) )
        {

            # not defined.
            $valid = 0 if ( !defined( $CONFIG{ 'install-source' } ) );
        }
    }
    else
    {
        $valid = 1;
    }

    if ( !$valid )
    {
        print <<EOF;
  Please specify the installation method to use, along with a source
 if that is required.

  For example:

     --install-method=copy        --install-source=/some/path
     --install-method=debootstrap
     --install-method=rinse
     --install-method=rpmstrap
     --install-method=tar         --install-source=/some/file.tar

EOF
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }


    #
    #  Make sure that any specified template file exists.
    #
    if ( defined( $CONFIG{ 'template' } ) &&
         length( $CONFIG{ 'template' } ) )
    {
        if ( -e $CONFIG{ 'template' } )
        {

            # nop
        }
        elsif ( -e "/etc/xen-tools/$CONFIG{'template'}" )
        {
            $CONFIG{ 'template' } = "/etc/xen-tools/$CONFIG{'template'}";
        }
        else
        {

            # failed to find either by fully qualified path,
            # or inside /etc/xen-tools.
            logprint(
                "The specified template file, $CONFIG{'template'}, does not exist.\n"
            );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }


    #
    #  If we've got a role directory specified then it must exist.
    #
    if ( defined( $CONFIG{ 'roledir' } ) && length( $CONFIG{ 'roledir' } ) )
    {
        if ( !-d $CONFIG{ 'roledir' } )
        {
            logprint(
                "The specified role directory '$CONFIG{'roledir'}' does not exist\n"
            );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }


    #
    #  If we've got a partitions directory specified then it must exist.
    #
    if ( defined( $CONFIG{ 'partitionsdir' } ) &&
         length( $CONFIG{ 'partitionsdir' } ) )
    {
        if ( !-d $CONFIG{ 'partitionsdir' } )
        {
            logprint(
                "The specified partitions directory '$CONFIG{'partitionsdir'}' does not exist\n"
            );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }


    #
    #  Make sure that any specified partitions file exists.
    #
    if ( ( defined( $CONFIG{ 'partitions' } ) ) &&
         ( length( $CONFIG{ 'partitions' } ) ) )
    {
        if ( !( $CONFIG{ 'partitions' } =~ /\// ) )
        {
            $CONFIG{ 'partitions' } =
              $CONFIG{ 'partitionsdir' } . '/' . $CONFIG{ 'partitions' };
        }

        if ( !-e $CONFIG{ 'partitions' } )
        {
            logprint(
                "The specified partitions file, $CONFIG{'partitions'}, does not exist.\n"
            );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }

        loadAndCheckPartitionsFile();
    }

    if ( $CONFIG{ 'swap-dev' } && $CONFIG{ 'noswap' } )
    {
        logprint("Please choose either swap-dev or noswap, not both!\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    if ( $CONFIG{ 'swap-dev' } && $CONFIG{ 'partitions' } )
    {
        logprint("Please choose either swap-dev or partitions, not both!\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    if ( $CONFIG{ 'image-dev' } )
    {
        if ( $CONFIG{ 'partitions' } )
        {
            logprint("Please choose either image-dev or partitions, not both!\n");
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }

        if ( !$CONFIG{ 'swap-dev' } && !$CONFIG{ 'noswap' } )
        {
            logprint("Please choose swap-dev or noswap with image-dev!\n");
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }


    #
    #  The user must choose either DHCP *or* Static IP.  not both
    #
    if ( $CONFIG{ 'dhcp' } && $CONFIG{ 'ip' } )
    {

        #
        #  However we will allow the DHCP setting to override a *partially*
        # specified IP address.
        #
        if ( $CONFIG{ 'ip' } =~ /^([0-9]+)\.([0-9]+)\.([0-9]+)\.*$/ )
        {
            delete $CONFIG{ 'ip' };
        }
        else
        {
            logprint("Please choose either DHCP or static usage, not both!\n");
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }

    #
    #  The user must specify one or the other.
    #
    if ( ( !$CONFIG{ 'dhcp' } ) && ( !$CONFIG{ 'ip' } ) )
    {
        logprint("Please choose one of:\n");
        logprint(" --dhcp\n");
        logprint(" --ip xx.xx.xx.xx\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    #
    #  If we're using static addresses warn if there are variables
    # missing
    #
    if ( $CONFIG{ 'ip' } )
    {
        logprint("WARNING:  No gateway address specified!\n")
          unless ( defined( $CONFIG{ 'gateway' } ) );

        logprint("WARNING:  No netmask address specified!\n")
          unless ( defined( $CONFIG{ 'netmask' } ) );
    }

    #
    #  If we don't have a MAC address specified then generate one.
    #
    if ( !$CONFIG{ 'mac' } )
    {
        $CONFIG{ 'mac' } = generateMACAddress();
    }

    #
    #  Make sure our output directory exists.
    #
    if ( !-d $CONFIG{ 'output' } )
    {
        print <<EOF;
  The output directory for creating the xen configuration file within
 doesn\'t exist:

           $CONFIG{ 'output' }

  Aborting.

EOF
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    #
    #  Already present?
    #
    my $cfg =
      $CONFIG{ 'output' } . "/" . $CONFIG{ 'hostname' } .
      $CONFIG{ 'extension' };
    if ( -e $cfg )
    {
        if ( $CONFIG{ 'force' } )
        {
            $CONFIG{ 'verbose' } && print "Removing existing file: $cfg\n";
            unlink($cfg);
        }
        else
        {
            print "Configuration file already exists; $cfg\n";
            print "Aborting\n";
            $CONFIG{'FAIL'} = 2;
            exit 127;
        }
    }

}



=begin doc

  Generate a 'random' MAC address.

  The MAC address is constructed based upon :

   1.  The standard Xen prefix.

   2.  The hostname + IP address of the new guest.

   3.  The distribution which is to be installed.

=end doc

=cut

sub generateMACAddress
{

    #
    #  Start with the xen prefix
    #
    my $mac = '00:16:3E';

    #
    #  Build up ( hostname + ip + dhcp + dist );
    #
    my $hash = '';
    foreach my $key (qw/ hostname ip dhcp dist /)
    {
        if ( $CONFIG{ $key } ) {
            if (ref($CONFIG{ $key }) eq 'ARRAY') {
                $hash .= join(',',@{$CONFIG{ $key }});
            } elsif (ref($CONFIG{ $key }) eq 'HASH') {
                $hash .= join(',',values %{$CONFIG{ $key }});
            } else {
                $hash .= $CONFIG{ $key };
            }
        }
    }

    #
    #  Generate an MD5 hash of this data.
    #
    $hash = md5_hex($hash);

    #
    #  Now build up a MAC address
    #
    while ( length($mac) < 17 )
    {
        $mac .= ":" . substr( $hash, 0, 2 );
        $hash = substr( $hash, 2 );
    }

    return ( uc($mac) );
}



=begin doc

  Make sure we have a log directory, and create an empty logfile
 for this run.

=end doc

=cut

sub setupLogFile
{

    mkdir( "/var/log/xen-tools", 0750 ) if ( !-d "/var/log/xen-tools" );

    #
    #  Move any existing for this run logfile.
    #  (Hint: read from the end to understand how this works).
    #
    my $logname = "/var/log/xen-tools/$CONFIG{'hostname'}.log";
    map {
        (my $new = $_) =~ s/(?<=\.)\d+(?=\.log$)/$& + 1/e;
        mv $_, $new; # increment file number
    } sort {
        $a =~ /\.(\d+)\.log$/;
        my $aa = $1;
        $b =~ /\.(\d+)\.log$/;
        my $bb = $1;
        $bb <=> $aa; # sort in reverse order
    } grep /\.\d+\.log$/, # we only care in numeric filenames
    glob( "/var/log/xen-tools/$CONFIG{'hostname'}.*.log" );

    # Move the non-numeric filename also
    mv $logname, "/var/log/xen-tools/$CONFIG{'hostname'}.0.log"
        if -f $logname;

    #
    #  Now create an empty file.
    #
    open STUB, '>', $logname;
    close STUB;

    #
    #  Make sure the logfile is 0640 - avoid leaking root passwords.
    #
    chmod( oct("0640"), $logname );
}



=begin doc

  Check that we have some required binaries present.

=end doc

=cut

sub checkBinariesPresent
{

    #
    #  Files we demand are present in all cases.
    #
    my @required = qw ( mount mkswap );

    foreach my $file (@required)
    {
        if ( !defined( which($file) ) )
        {
            logprint("The following binary is required to run this tool\n");
            logprint("\t$file\n");
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }

    #
    # Image type specific binaries
    #
    if ( defined( $CONFIG{ 'dir' } ) )
    {

        # loopback image
        if ( !defined( which("dd") ) )
        {
            logprint("The following binary is required to run this tool\n");
            logprint("\tdd\n");
            logprint(
                "(This only required for loopback images, which you've selected)\n"
            );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }
    elsif ( defined( $CONFIG{ 'evms' } ) )
    {

        #
        # EVMS-specific binaries.
        #
        my @evms = qw ( evms echo );

        foreach my $file (@evms)
        {
            if ( !defined( which($file) ) )
            {
                logprint("The following binary is required to run this tool\n");
                logprint("\t$file\n");
                logprint(
                    "(This is only required for EVMS volumes, which you've selected)\n"
                );
                $CONFIG{'FAIL'} = 1;
                exit 127;
            }
        }
    }
    elsif (defined( $CONFIG{ 'lvm' } ) )
    {

        # LVM-specific binaries.
        my @lvm = qw ( lvcreate lvremove );

        foreach my $file (@lvm)
        {
            if ( !defined( which($file) ) )
            {
                logprint("The following binary is required to run this tool\n");
                logprint("\t$file\n");
                logprint(
                    "(This is only required for LVM volumes, which you've selected)\n"
                );
                $CONFIG{'FAIL'} = 1;
                exit 127;
            }
        }
    }
}



=begin doc

  Loads a partitions file, checks the syntax and updates the configuration
 variables with it

=end doc

=cut

sub loadAndCheckPartitionsFile
{
    my %partitions;

    #
    #  Here we'll test for the required Perl module.
    #
    #  This allows us to:
    #
    #  a) Degrade usefully if the module isn't available.
    #
    #  b) Not require the module unless the user specifies a custom
    #     partitioning scheme.
    #
    my $test = "use Config::IniFiles";
    eval($test);
    if ($@)
    {
        print <<EOF;

 Aborting - To use the custom partitioning code you need to have the
 following Perl module installed:

   Config::IniFiles

 On a Debian system you can get this with:

   apt-get install libconfig-inifiles-perl

 Otherwise fetch it from CPAN.
EOF
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    tie %partitions, 'Config::IniFiles', ( -file => $CONFIG{ 'partitions' } );

    @PARTITIONS = ();

    my $name;
    my $details;
    my $foundroot = 0;
    while ( ( $name, $details ) = each %partitions )
    {
        if ( !( $name =~ /^[a-zA-Z0-9-]+$/ ) )
        {
            logprint("The partition name $name contains invalid characters.\n");
            logprint(
                   "Only alphanumeric characters and the hyphen are allowed\n");
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }

        if ( !( $details->{ 'size' } =~ /^[0-9.]+[GgMmKk]b?$/ ) )
        {
            logprint(
                "The size $details->{'size'} of partition $name contains is not recognized.\n"
            );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }

        if ( $details->{ 'type' } eq 'swap' )
        {
            push( @PARTITIONS,
                  {  'name'       => $name,
                     'size'       => $details->{ 'size' },
                     'type'       => 'swap',
                     'mountpoint' => '',
                     'options'    => ''
                  } );
        }
        else
        {
            if ( !$CONFIG{ 'make_fs_' . $details->{ 'type' } } )
            {
                logprint(
                    "The type $details->{'type'} of partition $name is not recognized.\n"
                );
                $CONFIG{'FAIL'} = 1;
                exit 127;
            }

            if ( !( $details->{ 'mountpoint' } =~ /^\/[^: \t\r\n]*$/ ) )
            {
                logprint(
                    "The mount point $details->{'mountpoint'} of partition $name is invalid.\n"
                );
                $CONFIG{'FAIL'} = 1;
                exit 127;
            }

            if ( !( $details->{ 'options' } =~ /^[^: \t\r\n]*$/ ) )
            {
                logprint(
                    "The mount options $details->{'options'} of partition $name are invalid.\n"
                );
                $CONFIG{'FAIL'} = 1;
                exit 127;
            }

            if ( !$details->{ 'options' } )
            {
                $details->{ 'options' } = 'defaults';
            }

            if ( $details->{ 'mountpoint' } eq '/' )
            {
                $foundroot = 1;
            }

            push( @PARTITIONS,
                  {  'name'       => $name,
                     'size'       => $details->{ 'size' },
                     'type'       => $details->{ 'type' },
                     'mountpoint' => $details->{ 'mountpoint' },
                     'options'    => $details->{ 'options' } } );
        }
    }

    if ( !$foundroot )
    {
        logprint("The root partition was not specified.\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    #
    # Sort by length of the mountpoint.
    #
    #  This makes it easy to mount parent folders first
    # (e.g. /var before /var/tmp)
    #
    @PARTITIONS =
      sort {length $a->{ 'mountpoint' } <=> length $b->{ 'mountpoint' }}
      @PARTITIONS;
}



=begin doc

  Populates the partition information using the supplied configuration
 arguments when not using the partitions file

=end doc

=cut

sub populatePartitionsData
{
    @PARTITIONS = ();

    #
    #  [swap]
    #
    push( @PARTITIONS,
          {  'name'       => 'swap',
             'size'       => $CONFIG{ 'swap' },
             'type'       => 'swap',
             'mountpoint' => '',
             'options'    => ''
          } ) unless ( $CONFIG{ 'noswap' } );

    #
    #  read the default filesystem options from the configuration file.
    #
    my $options = $CONFIG{ $CONFIG{ 'fs' } . "_options" } || undef;

    #
    #  If there weren't any options in the configuration file then
    # revert to our defaults.
    #
    if ( !defined($options) )
    {

        #
        #  XFS has different default options.
        #
        $options = "errors=remount-ro";
        $options = "defaults" if ( $CONFIG{ 'fs' } eq "xfs" );
    }


    #
    #  [root]
    #
    push( @PARTITIONS,
          {  'name'       => 'disk',
             'size'       => $CONFIG{ 'size' },
             'type'       => $CONFIG{ 'fs' },
             'mountpoint' => '/',
             'options'    => $options
          } );

}



=begin doc

  Converts the internal partitions array into a text representation
 suitable for passing to other scripts.

=end doc

=cut

sub exportPartitionsToConfig
{
    $CONFIG{ 'NUMPARTITIONS' } = $#PARTITIONS + 1;

    my $i;
    for ( $i = 0 ; $i < $CONFIG{ 'NUMPARTITIONS' } ; $i++ )
    {
        $CONFIG{ 'PARTITION' . ( $i + 1 ) } =
          $PARTITIONS[$i]{ 'name' } . ':' . $PARTITIONS[$i]{ 'size' } . ':' .
          $PARTITIONS[$i]{ 'type' } . ':' . $PARTITIONS[$i]{ 'mountpoint' } .
          ':' . $PARTITIONS[$i]{ 'options' } . ':' .
          $PARTITIONS[$i]{ 'imagetype' } . ':' . $PARTITIONS[$i]{ 'image' };
    }
}



=begin doc

  Show the user a summary of what is going to be created for them

=end doc

=cut

sub showSummary
{

    #
    # Show the user what to expect.
    #
    logprint("\nGeneral Information\n");
    logprint("--------------------\n");
    logprint("Hostname       :  $CONFIG{'hostname'}\n");
    logprint("Distribution   :  $CONFIG{'dist'}\n");
    logprint("Mirror         :  $CONFIG{'mirror'}\n");

    if ( defined $CONFIG{ 'image-dev' } )
    {
        logprint("Root Device    :  $CONFIG{'image-dev'}\n");
    }
    if ( defined $CONFIG{ 'swap-dev' } )
    {
        logprint("Swap Device    :  $CONFIG{'swap-dev'}\n");
    }

    my $info;
    my $partcount = 0;

    logprint("Partitions     :  ");
    foreach my $partition (@PARTITIONS)
    {
        next if ( !$partition );
        $info = sprintf( '%-15s %-5s (%s)',
                         ( $partition->{ 'type' } ne 'swap' ) ?
                           $partition->{ 'mountpoint' } :
                           'swap',
                         $partition->{ 'size' },
                         $partition->{ 'type' } );

        if ( $partcount++ )
        {
            logprint("                  $info\n");
        }
        else
        {
            logprint("$info\n");
        }
    }

    logprint("Image type     :  $CONFIG{'image'}\n");
    logprint("Memory size    :  $CONFIG{'memory'}\n");

    if ( defined( $CONFIG{ 'maxmem' } ) )
    {
        logprint("Max mem size   : $CONFIG{'maxmem'}\n");
    }

    if ( defined( $CONFIG{ 'kernel' } ) && length( $CONFIG{ 'kernel' } ) )
    {
        logprint("Kernel path    :  $CONFIG{'kernel'}\n");
    }

    if ( defined( $CONFIG{ 'modules' } ) && length( $CONFIG{ 'modules' } ) )
    {
        logprint("Module path    :  $CONFIG{'modules'}\n");
    }

    if ( defined( $CONFIG{ 'initrd' } ) && length( $CONFIG{ 'initrd' } ) )
    {
        logprint("Initrd path    :  $CONFIG{'initrd'}\n");
    }

    logprint("\nNetworking Information\n");
    logprint("----------------------\n");

    #
    # Show each IP address added.
    #
    # Note we only allow the first IP address to have a MAC address specified.
    #
    my $ips   = $CONFIG{ 'ip' };
    my $mac   = $CONFIG{ 'mac' };
    my $count = 1;

    if ( defined $ips )
    {

        #
        #  Scary magic.
        #
        if ( !UNIVERSAL::isa( $ips, "ARRAY" ) )
        {

            #
            #  If we're reading the value of "ip = xxx" from the configuration
            # file we'll have a single (scalar) value in $CONFIG{'ip'}.
            #
            #  BUT we actually assume this hash element contains a reference
            # to an array - since that is what the command-line parsing code
            # sets up for us.
            #
            #  So here we fake it - that was what the test above as for,
            # if we didn't have an array already, then fake one up.
            #
            #  We reset the $ips reference to undef, then coerce it to be an
            # (empty) array and push on our single IP.
            #
            #  It works.   Even if it's nasty, (or if it is a clever hack!)
            #
            $ips = undef;
            push( @$ips, $CONFIG{ 'ip' } );
            $CONFIG{ 'ip' } = $ips;
        }
    }


    if ( defined $ips )
    {

        #
        #  Print out each network address, and if there is a mac address
        # associated with it then use it too.
        #
        foreach my $i (@$ips)
        {
            my $m = undef;

            if ( ( $count == 1 ) && ( defined($mac) ) )
            {
                $m = $mac;
            }


            #
            #  Here we have special handling for the case where
            # IP addresses to be generated automatically.
            #
            #
            if ( $i =~ /auto/i )
            {
                $CONFIG{ 'verbose' } &&
                  logprint("Automatically determining an IP.");

                $i = findIP($i);
                if ( defined($i) )
                {
                    $CONFIG{ 'verbose' } && logprint("Claimed $i\n");
                }
                else
                {
                    print <<EOF;

ERROR:  You specified the automatic choosing of an IP address and
        none are left in $CONFIG{'ipfile'}.

EOF
                    $CONFIG{'FAIL'} = 1;
                    exit 127;
                }
            }

            #
            #  Show the IP address.
            #
            logprint("IP Address $count   : $i");

            #
            #  Log the ip addresses for later output
            #
            $IP_ADDRESSES .= "$i ";

            #  Option MAC address.
            if ( defined($m) )
            {
                logprint(" [MAC: $m]");
            }
            logprint("\n");

            $count += 1;
        }
    }

    #
    # mac address setting still works even for DHCP, but in that
    # case only the first one works.
    #
    if ( $CONFIG{ 'dhcp' } )
    {
        if ( defined( $CONFIG{ 'mac' } ) )
        {
            logprint("IP Address     : DHCP [MAC: $CONFIG{'mac'}]\n");
        }
        else
        {
            logprint("IP Address     : DHCP\n");
        }
    }

    $CONFIG{ 'netmask' } && logprint("Netmask        : $CONFIG{'netmask'}\n");
    $CONFIG{ 'broadcast' } &&
      logprint("Broadcast      : $CONFIG{'broadcast'}\n");
    $CONFIG{ 'gateway' } && logprint("Gateway        : $CONFIG{'gateway'}\n");
    $CONFIG{ 'nameserver' } && logprint("Nameserver     : $CONFIG{'nameserver'}\n");
    $CONFIG{ 'p2p' }     && logprint("Point to Point : $CONFIG{'p2p'}\n");
    print "\n";

}



=begin doc

  Test that the user has the "loop" module loaded and present,
 this is just a warning useful to newcomers.

=end doc

=cut

sub testLoopbackModule
{
    if ( -e "/proc/modules" )
    {
        my $modules = `cat /proc/modules`;

        if ( $modules !~ m/loop/ )
        {
            logprint("WARNING\n");
            logprint("-------\n");
            logprint(
                 "Loopback module not loaded and you're using loopback images\n"
            );
            logprint("Run the following to load the module:\n\n");
            logprint("modprobe loop max_loop=255\n\n");
        }
    }
}



=begin doc

  Create the two images "swap.img" and "disk.img" in the directory
 we've been given.

  We also will call the filesystem creation routine to make sure we
 have a valid filesystem.

=end doc

=cut

sub createLoopbackImages
{

    #
    #  Make sure we have the relevant output directory.
    #
    my $output = $CONFIG{ 'dir' } . "/domains/" . $CONFIG{ 'hostname' };

    if ( !-d $output )
    {

        #
        #  Catch errors with eval.
        #
        eval {mkpath( $output, 0, 0755 );};
        if ($@)
        {
            fail("Cannot create directory tree $output - $@");
        }
    }


    #
    # Only proceed overwritting if we have --force specified.
    #
    if ( !$CONFIG{ 'force' } )
    {
        foreach my $partition (@PARTITIONS)
        {
            my $disk =
              $CONFIG{ 'dir' } . '/domains/' . $CONFIG{ 'hostname' } . '/' .
              $partition->{ 'name' } . '.img';

            if ( -e $disk )
            {
                logprint("The partition image already exists.  Aborting.\n");
                logprint(
                    "Specify '--force' to overwrite, or remove the following file\n"
                );
                logprint( $disk . "\n" );
                $CONFIG{'FAIL'} = 2;
                exit 127;
            }
        }
    }


    foreach my $partition (@PARTITIONS)
    {
        my $disk =
          $CONFIG{ 'dir' } . '/domains/' . $CONFIG{ 'hostname' } . '/' .
          $partition->{ 'name' } . '.img';

        #
        # Save the image path to the partitions array
        #
        $partition->{ 'imagetype' } = 'file:';
        $partition->{ 'image' }     = $disk;

        #
        # Modify the size to something reasonable
        #
        my $size = $partition->{ 'size' };

        #
        # Convert Gb -> Mb for the partition image size.
        #
        if ( $size =~ /^([0-9.]+)Gb*$/i )
        {
            $size = $1 * 1024 . "M";
        }

        #
        #  Final adjustments to sizing.
        #
        $size =~ s/Mb*$/k/i;

        #
        #  Use dd to create the partition image.
        #
        logprint("\nCreating partition image: $disk\n");
        my $image_cmd;
        if ( $CONFIG{ 'image' } eq "sparse" )
        {
            $CONFIG{ 'verbose' } && logprint("Creating sparse image\n");
            $image_cmd = "dd if=/dev/zero of=$disk bs=$size count=0 seek=1024";
        }
        else
        {
            $CONFIG{ 'verbose' } && logprint("Creating full-sized image\n");
            $image_cmd = "dd if=/dev/zero of=$disk bs=$size count=1024";
        }

        # Set the umask so that the images are not world readable.
        my $oldumask = umask;
        umask(0077);

        # run the image creation command
        runCommand($image_cmd, \%CONFIG);
        logprint("Done\n");

        # Reset the umask to the previous value
        umask($oldumask);

        if ( !-e $disk )
        {
            logprint("The partition image creation failed to create $disk.\n");
            logprint("aborting\n");
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }

        #
        #  Finally create the filesystem / swap
        #
        if ( $partition->{ 'type' } eq 'swap' )
        {
            createSwap($disk);
        }
        else
        {
            createFilesystem( $disk, $partition->{ 'type' } );
        }
    }
}



=begin doc

  This function is used if you want your new system be installed to a
 physical drive (e.g. partition /dev/hda4) or to an already existing
 logical volume (e.g. /dev/root_vg/xen_root_lv).

 Walter Reiner

=end doc

=cut

sub usePhysicalDevice
{
    my $phys_img;
    my $swap_img;

    @PARTITIONS = ();

    if ( defined $CONFIG{ 'swap-dev' } )
    {
        $swap_img = $CONFIG{ 'swap-dev' };

        if ( !-e $swap_img )
        {
            logprint(
                "The physical device or logical volume for swap-dev $swap_img doesn't exist.  Aborting.\n"
            );
            logprint(
                "NOTE: Please provide full path to your physical device or logical volume.\n"
            );
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }

        push( @PARTITIONS,
              {  'name'       => 'swap',
                 'size'       => '',
                 'type'       => 'swap',
                 'mountpoint' => '',
                 'options'    => '',
                 'imagetype'  => 'phy:',
                 'image'      => $swap_img
              } ) unless ( $CONFIG{ 'noswap' } );
    }

    my $options = 'errors=remount-ro';
    if ( $CONFIG{ 'fs' } eq 'xfs' )
    {
        $options = 'defaults';
    }

    if ( defined $CONFIG{ 'image-dev' } )
    {
        $phys_img = $CONFIG{ 'image-dev' };

        push( @PARTITIONS,
              {  'name'       => 'disk',
                 'size'       => '',
                 'type'       => $CONFIG{ 'fs' },
                 'mountpoint' => '/',
                 'options'    => $options,
                 'imagetype'  => 'phy:',
                 'image'      => $phys_img
              } );
    }
    else
    {
        logprint("No image-dev parameter given.  Aborting.\n");
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    createFilesystem( $phys_img, $CONFIG{ 'fs' } );
    createSwap($swap_img) unless ( $CONFIG{ 'noswap' } );
}



=begin doc

  This function is responsible for creating two new logical volumes within
 a given LVM volume group.

=end doc

=cut

sub createLVMBits
{

    #
    #  Check whether the disk volume exists already, and if so abort
    #  unless '--force' is specified.
    #
    foreach my $partition (@PARTITIONS)
    {
        my $disk     = $CONFIG{ 'hostname' } . '-' . $partition->{ 'name' };
        my $lvm_disk = "/dev/$CONFIG{'lvm'}/$disk";

        if ( -e $lvm_disk )
        {

            # Delete if forcing
            if ( $CONFIG{ 'force' } )
            {
                if ( $CONFIG{ 'no_xen_ok' } or
                     !xenRunning($CONFIG{ 'hostname' }, \%CONFIG)) {
                    logprint(
                        "Removing $lvm_disk - since we're forcing the install\n");
                    runCommand("lvremove --force $lvm_disk", \%CONFIG);
                } else {
                    fail("ERROR: Xen guest $CONFIG{'hostname'} appears to be running.\nAborting.\n");
                }
            }
            else
            {
                logprint("The LVM disk image already exists.  Aborting.\n");
                logprint("Specify '--force' to delete and recreate\n");
                $CONFIG{'FAIL'} = 2;
                exit 127;
            }
        }
    }

    foreach my $partition (@PARTITIONS)
    {
        my $disk     = $CONFIG{ 'hostname' } . '-' . $partition->{ 'name' };
        my $lvm_disk = "/dev/$CONFIG{'lvm'}/$disk";

        #
        # Save the image path to the partitions array
        #
        $partition->{ 'imagetype' } = 'phy:';
        $partition->{ 'image' }     = $lvm_disk;

        #
        # The commands to create the volume.
        #
        my $disk_cmd =
          "lvcreate $CONFIG{'lvm'} -L $partition->{'size'} -n $disk";

        #
        # Create the volume
        #
        runCommand($disk_cmd, \%CONFIG);

        #
        # Make sure that worked.
        #
        if ( !-e $lvm_disk )
        {
            logprint(
                "The LVM partition image creation failed to create $lvm_disk.\n"
            );
            logprint("aborting\n");
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }

        #
        #  Finally create the filesystem / swap
        #
        if ( $partition->{ 'type' } eq 'swap' )
        {
            createSwap($lvm_disk);
        }
        else
        {
            createFilesystem( $lvm_disk, $partition->{ 'type' } );
        }
    }

}



=begin doc

  This function is responsible for creating two new logical volumes within
 a given EVMS container group (which at the moment is either LVM or LVM2), but
 should be compatible with any further extentions of evms.

=end doc

=cut

sub createEVMSBits
{

    #
    #  Check whether the disk volume exists already, and if so abort
    #  unless '--force' is specified.  This is two steps with evms,
    #  because two things need to be checked, the volume and the object.
    #

    foreach my $partition (@PARTITIONS)
    {

        # Check whether the EVMS volume already exists, abort unless '--force' is specified.
        my $evms_volume_disk =
          "/dev/evms/$CONFIG{'hostname'}-$partition->{'name'}";
        if ( -e $evms_volume_disk )
        {

            # Delete if forcing
            if ( $CONFIG{ 'force' } )
            {
                logprint(
                    "Removing $evms_volume_disk - since we're forcing the install\n"
                );
                runCommand("echo Delete : $evms_volume_disk | evms", \%CONFIG);
            }
            else
            {
                logprint(
                    "The EVMS volume $evms_volume_disk already exists.  Aborting.\n"
                );
                logprint("Specify '--force' to delete and recreate\n");
                $CONFIG{'FAIL'} = 2;
                exit 127;
            }
        }

        #
        # Check whether the EVMS object exists, abort unless '--force'
        # is specified.
        #
        # Note: $evms_object_disk is not specified directly as a device
        #
        my $evms_object_disk =
          "$CONFIG{'evms'}/$CONFIG{'hostname'}-$partition->{'name'}";
        if ( -e $evms_object_disk )
        {

            # Delete if forcing
            if ( $CONFIG{ 'force' } )
            {
                logprint(
                    "Removing $evms_object_disk - since we're forcing the install\n"
                );
                runCommand("echo Delete : $evms_object_disk | evms", \%CONFIG);
            }
            else
            {
                logprint(
                    "The EVMS object $evms_object_disk already exists.  Aborting.\n"
                );
                logprint("Specify '--force' to delete and recreate\n");
                $CONFIG{'FAIL'} = 2;
                exit 127;
            }
        }
    }

    foreach my $partition (@PARTITIONS)
    {
        my $disk      = $CONFIG{ 'hostname' } . '-' . $partition->{ 'name' };
        my $evms_disk = "/dev/evms/$disk";

        #
        # Save the image path to the partitions array
        #
        $partition->{ 'imagetype' } = 'phy:';
        $partition->{ 'image' }     = $evms_disk;

        #
        #  Modify the size to something reasonable
        #
        my $size = $partition->{ 'size' };

        #
        # Convert Gb -> Mb for the partition image size.
        #
        if ( $size =~ /^([0-9.]+)Gb*$/i )
        {
            $size = $1 * 1024 . "M";
        }

        #
        #  Final adjustments to sizing.
        #
        $size =~ s/Mb*$/k/i;

        #
        # The commands to create the objects and volumes.
        #
        # create the object
        #
        my $disk_cmd_object =
          "echo allocate : $CONFIG{'evms'}/Freespace, size=$CONFIG{'size'}, name=$disk | evms";

        #
        # these will be piped to evms, but gotta check it first
        #
        my $disk_cmd_volume =
          "echo create : Volume, $CONFIG{'evms'}/$disk, name=$disk | evms";

        #
        # Create the volumes
        #
        runCommand($disk_cmd_object, \%CONFIG);
        runCommand($disk_cmd_volume, \%CONFIG);

        #
        #  Initialise the partition with the relevant filesystem.
        #
        if ( $partition->{ 'type' } eq 'swap' )
        {
            createSwap($disk_cmd_volume);
        }
        else
        {
            createFilesystem( $disk_cmd_volume, $partition->{ 'type' } );
        }
    }

}



=begin doc

  Format the given image in the users choice of filesystem.

=end doc

=cut

sub createFilesystem
{
    my ( $image, $fs ) = (@_);

    #
    #  We have the filesystem the user wanted, make sure that the
    # binary exists.
    #
    my $command = $CONFIG{ "make_fs_" . $fs };

    #
    #  Split the command into "binary" + "args".  Make sure that
    # the binary exists and is executable.
    #
    my ($binary, $args) = split(/ /, $command, 2);

    if ( !defined( which($binary) ) )
    {
        logprint(
            "The binary '$binary' required to create the filesystem $fs is missing\n"
        );
        $CONFIG{'FAIL'} = 1;
        exit 127;
    }

    unless ( $CONFIG{ 'dontformat' } ) {
        #
        #  OK we have the command and the filesystem.  Create it.
        #
        logprint("\nCreating $fs filesystem on $image\n");

        $command .= " " . $image;

        runCommand($command, \%CONFIG);
        logprint("Done\n");
    }
}



=begin doc

  Create the swap filesystem on the given device.

=end doc

=cut

sub createSwap
{
    my ($path) = (@_);

    logprint("\nCreating swap on $path\n");

    runCommand("mkswap $path", \%CONFIG);
    logprint("Done\n");
}


=begin doc

  Mount the loopback disk image into a temporary directory.

  Alternatively mount the relevant LVM volume instead.

=end doc

=cut

sub mountImage
{

    #
    #  Create a temporary mount-point to use for the image/volume.
    #
    $MOUNT_POINT = tempdir( CLEANUP => 1 );

    foreach my $partition (sort { length($a->{'mountpoint'}) <=> length($b->{'mountpoint'}) } @PARTITIONS)
    {
        if ( $partition->{ 'type' } ne 'swap' )
        {
            my $image      = $partition->{ 'image' };
            my $mountpoint = $MOUNT_POINT . $partition->{ 'mountpoint' };

            mkpath( $mountpoint, 0, 0755 );

            #
            #  Lookup the correct arguments to pass to mount.
            #
            my $mount_cmd;
            my $mount_type = $CONFIG{ 'mount_fs_' . $partition->{ 'type' } };

            #
            #  LVM partition
            #
            if ( $CONFIG{ 'lvm' } )
            {
                $mount_cmd = "mount $mount_type $image $mountpoint";
            }
            elsif ( $CONFIG{ 'evms' } )
            {
                $mount_cmd = "mount $mount_type $image $mountpoint";
            }
            elsif ( $CONFIG{ 'image-dev' } )
            {
                $mount_cmd = "mount $mount_type $image $mountpoint";
            }
            else
            {
                $mount_cmd = "mount $mount_type -o loop $image $mountpoint";
            }
            runCommand($mount_cmd, \%CONFIG);
        }
    }

}



=begin doc

  Install the system, by invoking the xt-install-image script.

  The script will be given the appropriate arguments from our environment.

=end doc

=cut

sub installSystem
{

    #
    #
    #  Basic command
    #
    my $cmd =
      "xt-install-image --hostname=$CONFIG{'hostname'} --location=$MOUNT_POINT --dist=$CONFIG{'dist'} --install-method=$CONFIG{'install-method'}";

    #
    #  Add on the install source if required.
    #
    $cmd .= " --install-source=$CONFIG{'install-source'}"
      if ( defined( $CONFIG{ 'install-source' } ) );

    #
    #  Do we have a per-image configuration file?
    #
    $cmd .= " --config=$CONFIG{'config'}" if ( defined( $CONFIG{ 'config' } ) );

    #
    #  Add on the mirror, if defined
    #
    $cmd .= " --mirror=$CONFIG{'mirror'}" if ( defined( $CONFIG{ 'mirror' } ) );

    #
    #  Add on the current cache setting
    #
    $cmd .= " --cache=$CONFIG{'cache'}" if length( $CONFIG{ 'cache' } );

    #
    #  Add on the current cachedir setting
    #
    $cmd .= " --cachedir=$CONFIG{'cachedir'}" if length( $CONFIG{ 'cachedir' } );

    #
    #  Propagate --verbose
    #
    if ( $CONFIG{ 'verbose' } )
    {
        $cmd .= " --verbose";
    }

    #
    #  Propagate --arch
    #
    if ( $CONFIG{ 'arch' } )
    {
        $cmd .= " --arch=$CONFIG{'arch'}";
    }


    #
    #  Propagate --debootstrap-cmd if install-method is debootstrap
    #
    if ( $CONFIG{ 'install-method' } eq 'debootstrap' and
         $CONFIG{ 'debootstrap-cmd' } )
    {
        $cmd .= " --debootstrap-cmd=$CONFIG{'debootstrap-cmd'}";
    }


    #
    #  Propagate --apt_proxy
    #
    if ( $CONFIG{ 'apt_proxy' } )
    {
        $cmd .= " --apt_proxy=$CONFIG{'apt_proxy'}";
    }


    #
    #  Show the user what they are installing
    #
    logprint("Installation method: $CONFIG{'install-method'}\n");

    #
    #  And where from, if relevant.
    #
    if ( ( lc( $CONFIG{ 'install-method' } ) eq "copy" ) ||
         ( lc( $CONFIG{ 'install-method' } ) eq "tar" ) )
    {
        logprint("(Source: $CONFIG{'install-source'})\n");
    }


    #
    #  Run the command.
    #
    runCommand($cmd, \%CONFIG);
    logprint("Done\n");
}



=begin doc

  Export our configuratione variables as a series of environmental
 variables.

  This is required so that our hook and role scripts can easily
 read the settings without access to the command line / configuration
 file we were invoked with.

=end doc

=cut

sub exportEnvironment
{

    #
    # Export partitions array to configuration
    #
    exportPartitionsToConfig();

    foreach my $key ( keys %CONFIG )
    {
        if ( defined( $CONFIG{ $key } ) )
        {
            my $envkey = $key;
            $envkey =~ s/-/_/g;
            $ENV{ $envkey } = $CONFIG{ $key };
        }
    }
}



=begin doc

  Run the xt-customise-system script to customize our fresh installation.

  Before we do this we must pass all the relevant options into our
 environment and mount /proc and /dev/pts.

=end doc

=cut

sub runCustomisationHooks
{

    #
    #  Before running any scripts we'll mount /proc in the guest.
    #
    #  1.  Make sure there is a directory.
    mkdir( $MOUNT_POINT . "/proc", 0755 ) if ( !-d $MOUNT_POINT . "/proc" );

    #  2.  Mount
    runCommand("mount -o bind /proc $MOUNT_POINT/proc", \%CONFIG);

    #
    #  Before running any scripts we'll mount /dev/pts in the guest, too.
    #
    #  1.  Make sure there is a directory.
    mkdir( $MOUNT_POINT . "/dev", 0755 ) if ( !-d $MOUNT_POINT . "/dev" );
    mkdir( $MOUNT_POINT . "/dev/pts", 0755 )
        if ( !-d $MOUNT_POINT . "/dev/pts" );

    #  2.  Mount
    runCommand("mount -t devpts devpts $MOUNT_POINT/dev/pts", \%CONFIG);

    #
    # Now update the environment for each defined IP address.
    # these are handled specially since we use arrays.
    #
    # Remove the value we set above.
    delete $ENV{ 'ip' };

    #
    # Setup a seperate ip$count value for each IP address.
    #
    my $ips   = $CONFIG{ 'ip' };
    my $count = 1;

    foreach my $i (@$ips)
    {
        $ENV{ 'ip' . $count } = $i;
        $count += 1;
    }

    $ENV{ 'ip_count' } = ( $count - 1 );


    #
    #  Now show the environment the children get
    #
    if ( $CONFIG{ 'verbose' } )
    {
        logprint("Customization Script Environment:\n");
        logprint("---------------------------------\n");
        foreach my $key ( sort keys %ENV )
        {
            logprint( "\t'" . $key . "' = '" . $ENV{ $key } . "'\n" );
        }
    }

    #
    #  Copy dom0's resolv.conf to domU
    #
    mv("$MOUNT_POINT/etc/resolv.conf", "$MOUNT_POINT/etc/resolv.conf.old") if -f "$MOUNT_POINT/etc/resolv.conf";
    cp("/etc/resolv.conf", "$MOUNT_POINT/etc/resolv.conf");

    #
    #  Actually run the appropriate hooks
    #
    my $customize =
      "xt-customize-image --dist=$CONFIG{'dist'} --location=$MOUNT_POINT";
    if ( $CONFIG{ 'verbose' } )
    {
        $customize .= " --verbose";
    }
    logprint("\nRunning hooks\n");
    runCommand($customize, \%CONFIG);
    logprint("Done\n");

    #
    #  Restore domU's resolv.conf if needed
    #
    if (-f "$MOUNT_POINT/etc/resolv.conf") {
        mv("$MOUNT_POINT/etc/resolv.conf.old", "$MOUNT_POINT/etc/resolv.conf");
    } else {
        unlink "$MOUNT_POINT/etc/resolv.conf";
    }
}



=begin doc

  Find a useable IP address from the file /etc/xen-tools/ips.txt.

=end doc

=cut

sub findIP
{

    # Abort if we don't have the IP file.
    return undef if ( !-e $CONFIG{ 'ipfile' } );

    #
    # Open and read the file.
    #
    open( RANGE, "<", $CONFIG{ 'ipfile' } ) or
      fail("Failed to read $CONFIG{'ipfile'} - $!");
    my @lines = <RANGE>;
    my @updated;
    close(RANGE);

    #
    #  Find an unclaimed line.
    #
    my $ip = undef;
    foreach my $line (@lines)
    {

        # skip empty lines.
        next if ( !defined($line) );
        next if ( !length($line) );
        chomp($line);

        # find an IP.
        if ( ( !defined($ip) ) && ( $line =~ /^([0-9\.]+)$/ ) )
        {
            $ip   = $line;
            $line = $ip . ": used";
        }

        push( @updated, $line );
    }

    #
    #  Now write out the new entries.
    #
    open( RANGE, ">", $CONFIG{ 'ipfile' } ) or
      fail("Failed to write to $CONFIG{'ipfile'} - $!");
    print RANGE join( "\n", @updated );
    close(RANGE);

    #
    #  Sanity check - handle the old case where the format of the file
    # was different.
    #
    if ( defined($ip) )
    {
        my @tmp = split( /\./, $ip );
        if ( scalar(@tmp) < 3 )
        {
            print <<EOF;
ERROR
-----

  The $CONFIG{'ipfile'} file must contain full IP addresses, for example:

192.168.1.100
192.168.1.101
192.168.1.102
..
192.168.1.200

  Aborting.  Please update the file or specify an IP address manually.

EOF
            $CONFIG{'FAIL'} = 1;
            exit 127;
        }
    }

    #
    #  Return
    #
    return ($ip);
}



=begin doc

  Run *all* specified role scripts.

=end doc

=cut

sub runRoleScripts
{
    my ($scripts) = (@_);

    if ( !defined($scripts) )
    {
        logprint("\nNo role scripts were specified.  Skipping\n");
        return;
    }

    #
    #  OK we have at least one script specified.  Split it up
    # and try it out.
    #
    foreach my $name ( split( /,/, $scripts ) )
    {

        # ignore empty ones.
        next if ( ( !defined($name) ) || ( !length($name) ) );

        # strip leading + triling space.
        $name =~ s/^\s+//;
        $name =~ s/\s+$//;

        # run the script
        runRoleScript($name);
    }
}



=begin doc

  Run the specified role script.

=end doc

=cut

sub runRoleScript
{
    my ($role) = (@_);

    my $roleDir = $CONFIG{ 'roledir' };

    #
    #  Role-script arguments are optional.  If present prepare to
    # append.
    #
    my $args = '';
    $args = " " . $CONFIG{ 'role-args' } if ( $CONFIG{ 'role-args' } );

    #
    #  The complete path to the role script
    #
    my $file = $role;
    $file = $roleDir . "/" . $file unless $file =~ /\//;

    if ( -x $file )
    {
        logprint("\nRole: $role\n");
        logprint("\tFile: $file\n");
        logprint("\tArgs: $args\n") if ( length($args) );
    }
    else
    {
        logprint("\nRole script not executable : $file for role '$role'\n");
        logprint("Ignoring\n");
        return;
    }


    #
    #  Our environment is already setup because of the call to
    # runCustomisationHooks.
    #
    #  We just need to run the script with two arguments:
    #
    #   - The mountpoint to the new system.
    #   - Any, optional, supplied arguments.
    #
    # NOTE:  Space added to $args as prefix ..
    #
    runCommand( $file . " " . $MOUNT_POINT . $args, \%CONFIG );

    logprint("Role script completed.\n");
}



=begin doc

  Create the Xen configuration file.

  Note that we don't need to do any setup for the environment since
 we did this already before running the hook scripts.

=end doc

=cut

sub runXenConfigCreation
{

    #
    #  Configuration file we'll create
    #
    my $dir  = $CONFIG{ 'output' };
    my $ext  = $CONFIG{ 'extension' };
    my $file = $dir . "/" . $CONFIG{ 'hostname' } . $ext;


    #
    #  Abort if it exists.
    #
    if ( -e $file )
    {
        unless ( $CONFIG{ 'force' } )
        {
            logprint("The Xen configuration file $file exists\n");
            logprint("Specify --force to force overwriting it.\n");
            logprint("Aborting\n");
            # FAIL = 2 will keep existing config file
            $CONFIG{'FAIL'} = 2;
            exit 127;
        }
    }

    #
    #  Create the config.
    #
    my $command = "xt-create-xen-config --output=$dir --extension=$ext";

    #
    #  Add the template if specified
    #
    if ( ( defined( $CONFIG{ 'template' } ) ) &&
         ( -e $CONFIG{ 'template' } ) )
    {
        $command .= " --template=" . $CONFIG{ 'template' };
    }

    #
    #  Add the admins, if any.
    #
    if ( defined( $CONFIG{ 'admins' } ) )
    {
        $command .= " --admins=$CONFIG{'admins'}";
    }

    #
    #  Make sure the template gets a list of all IPs
    #
    $ENV{ 'ips' } = $IP_ADDRESSES;


    logprint("\nCreating Xen configuration file\n");
    runCommand($command, \%CONFIG);
    logprint("Done\n");
}



=begin doc

  chroot() into the new system and setup the password.

=end doc

=cut

sub setupRootPassword
{
    logprint("Setting up root password\n");

    if ( $CONFIG{ 'passwd' } )
    {
        if ( -x $MOUNT_POINT . "/usr/bin/passwd" )
        {
            my $tryagain = 1;
            my $term = Term::ReadLine->new('Password change failed');
            while ($tryagain) {
                my $rc = system("chroot $MOUNT_POINT /usr/bin/passwd");
                if ($rc >> 8) {
                    $tryagain = $term->ask_yn(
                        prompt => 'Do you want to try to change the password again??',
                        default => 'y',
                    );
                } else {
                    $tryagain=0;
                }
            }
        }
        else
        {
            logprint("'passwd' command not found in the new install.\n");
        }
    }
    else
    {
        logprint("Generating a password for the new guest.\n");
        #
        #  Replace the password in the /etc/shadow file
        #
        my $shadow_path = $MOUNT_POINT . '/etc/shadow';
        if ( -e $shadow_path )
        {
            #
            #  Generate a password, salt and use that to generating a hash
            #
            if ( $CONFIG{ 'genpass' } )
            {
                $PASSWORD = generatePassword( $CONFIG{ 'genpass_len' } );
            }
            else
            {
                $PASSWORD = $CONFIG { 'password' };
            }

            my $salt = generatePassword(8);

            my $hash_method;
            if ($CONFIG{ 'hash_method' } eq 'md5')
            {
                $hash_method = '$1$';
            }
            elsif ($CONFIG{ 'hash_method' } eq 'sha256')
            {
                $hash_method = '$5$';
            }
            elsif ($CONFIG{ 'hash_method' } eq 'sha512')
            {
                $hash_method = '$6$';
            }
            else
            {
                fail("oops... unknown hashing method, should not happen!");
            }

            my $hash = crypt($PASSWORD, $hash_method . $salt);

            #
            #  Copy the file to ensure the original retains the correct
            #  permissions set by the System
            #
            my $tmp_shadow_path = "$shadow_path.tmp";
            cp("$shadow_path","$tmp_shadow_path");
            open(TMP, "<", $tmp_shadow_path) or fail($!);
            open(SHADOW, ">", $shadow_path) or fail($!);
            my $line;
            while(defined($line = <TMP>))
            {
                $line =~ s#^root:[^:]*:#root:$hash:#;
                print SHADOW $line;
            }

            #
            #  Close the files and delete the temporary file
            #
            close(SHADOW);
            close(TMP);
            unlink($tmp_shadow_path);
        }
        else
        {
            logprint("Failed to find /etc/passwd in the install.\n");
        }
    }
}

=begin doc

  create a random "string"

=end doc

=cut

sub generatePassword {
    my $length = $_[0];
    my $possible = 'abcdefghijkmnpqrstuvwxyz23456789ABCDEFGHJKLMNPQRSTUVWXYZ';
    my $password = '';
    while (length($password) < $length) {
        $password .= substr($possible, (int(rand(length($possible)))), 1);
    }
    return $password;
}


=begin doc

  Unmount any mount-points which are below the given path.

  The mountpoints are chosen by looking at /proc/mounts which
 might not be portable, but works for me.  (tm).

=end doc

=cut

sub unMountImage
{
    my ($point, $fail_ok) = (@_);

    #
    #  First we unmount /proc and /dev/pts in the guest install.
    #
    runCommand("umount $point/proc", \%CONFIG, $fail_ok);
    #runCommand("umount $point/dev/pts", \%CONFIG, $fail_ok);

    #
    #  Open /proc/mount and get a list of currently mounted paths
    # which begin with our mount point.
    #
    my @points;

    open( MOUNTED, "<", "/proc/mounts" ) or
      fail("Failed to open mount list");
    foreach my $line (<MOUNTED>)
    {

        #
        #  Split into the device and mountpoint.
        #
        my ( $device, $path ) = split( / /, $line );

        if ( $path =~ /\Q$point\E/ )
        {
            push @points, $path;
        }
    }
    close(MOUNTED);

    #
    #  Now we have a list of mounts.  We need to move the
    # longest first, we can do this by sorting and reversing.
    #
    #  (ie. We unmount the children, then the parent.)
    #
    @points = sort @points;
    @points = reverse @points;

    foreach my $path (@points)
    {
        $CONFIG{ 'verbose' } && print "Unmounting : $path\n";
        runCommand("umount $path", \%CONFIG, $fail_ok);
    }

    $MOUNT_POINT = undef;
}


=begin doc

  If we still have the temporary image mounted then make sure
 it is unmounted before we terminate.

=end doc

=cut

sub clean_up () {
    if ( defined($MOUNT_POINT) )
    {
        unMountImage($MOUNT_POINT, 1);
    }
}

END
{
    # Capture exit code
    my $exitcode = $?;

    exit $exitcode if $VERSION || $HELP || $MANUAL || $DUMPCONFIG;

    my $host_rsa_key = '';
    #
    #  Unmount the image if it is still mounted.
    #
    if ( defined($MOUNT_POINT) )
    {
        #
        #  Before we unmount get the host's RSA key
        #
        my $key_path .= $MOUNT_POINT;
        $key_path .= '/etc/ssh/ssh_host_rsa_key.pub';
        if ( `ssh-keygen -lf $key_path` =~ /^(\S+)\s+(\S+)/ ) {
            $host_rsa_key = $2;
        } else {
            $host_rsa_key = "N/A";
        }
        unMountImage($MOUNT_POINT, $CONFIG{'FAIL'});
    }

    #
    #  If we're supposed to start the new instance do so - note here we
    # have to unmount the image first.
    #
    if ( $CONFIG{ 'boot' } and !$CONFIG{'FAIL'} )
    {
        #
        #  If there is an /etc/xen/auto directory then link in the
        # domain so that it will automatically restart, if it isn't
        # already present.
        #
        #  (Will be present if this is overwriting a previous image,
        # for example.)
        #
        if ( -d "/etc/xen/auto" )
        {
            my $cfg =
                $CONFIG{ 'output' } . "/" . $CONFIG{ 'hostname' } .
                $CONFIG{ 'extension' };

            if ( !-e $cfg )
            {
                logprint("Creating auto-start symlink to: $cfg\n");

                my $link = "ln -s $cfg /etc/xen/auto/";
                runCommand($link, \%CONFIG);
            }
        }

        #
        #
        #  Start the image
        #

        # Config file.
        my $cfg =
            $CONFIG{ 'output' } . "/" . $CONFIG{ 'hostname' } .
            $CONFIG{ 'extension' };

        # Start the DomU
        runCommand("$CONFIG{'xm'} create $cfg", \%CONFIG);

        logprint("Started new Xen guest: $CONFIG{'hostname'} [$cfg]\n");
    }

    #
    #  Here we print out the status message when finishing.
    #
    #  NOTE:  We use the $CONFIG{'pid'} here to control whether the
    # message is displayed - since this avoids it from being displayed
    # twice when --boot is used.
    #
    if ( ( defined( $CONFIG{ 'hostname' } ) ) &&
         ( -e "/var/log/xen-tools/$CONFIG{'hostname'}.log" ) &&
         ( !$CONFIG{ 'pid' } ) )
    {
        print "\n\nLogfile produced at:\n";
        print "\t /var/log/xen-tools/$CONFIG{'hostname'}.log\n";
    }

    #
    #  Did we fail?  If so then we should remove the broken installation,
    # unless "--keep" was specified.
    #
    #  If we didn't fail, then we assume we succeeded, print a summary
    #
    #  $CONFIG{'FAIL'} = 0  -  Success
    #  $CONFIG{'FAIL'} = 1  -  Failed to install, delete the image
    #  $CONFIG{'FAIL'} = 2  -  Files exist, either .cfg or lvm... etc
    if ( $CONFIG{'FAIL'} == 1 && ( !$CONFIG{ 'keep' } ) )
    {

        #
        #  Run the command
        #
        $CONFIG{ 'verbose' } &&
          logprint("Removing failed install: $CONFIG{'hostname'}\n");

        if ($CONFIG{ 'hostname' }) {
            my $option = '';
            if ($CONFIG{ 'lvm' }) {
                $option = "--lvm=$CONFIG{'lvm'}"
            } elsif ($CONFIG{ 'evms' }) {
                $option = "--evms=$CONFIG{'evms'}"
            } elsif ($CONFIG{ 'dir' }) {
                $option = "--dir=$CONFIG{'dir'}"
            }

            if ($option) {
                runCommand("xen-delete-image $option --hostname=$CONFIG{'hostname'}", \%CONFIG);
            } else {
                die "Assertion that either --dir, --lvm, or --dir are given".
                    " failed.\nThis is probably a bug, please report it.";
            }
        }
    } elsif ( $CONFIG{'FAIL'} == 0 ) {
        #
        #  Assume success
        #
        logprint("\nInstallation Summary\n");
        logprint("---------------------\n");
        logprint("Hostname        :  $CONFIG{'hostname'}\n");
        logprint("Distribution    :  $CONFIG{'dist'}\n");
        logprint("MAC Address     :  $CONFIG{'mac'}\n");
        logprint("IP Address(es)  :  ");
        if ( $CONFIG{ 'dhcp' } ) {
           logprint("dynamic");
        } elsif( $CONFIG{ 'ip' } ) {
           logprint( $IP_ADDRESSES );
        }
        logprint("\n");
        logprint("RSA Fingerprint :  $host_rsa_key\n");
        logprint("Root Password   :  ");
        if ( $PASSWORD ) {
            logprint("$PASSWORD\n");
        } else {
            logprint ("N/A\n");
        }
        logprint("\n");
    }

    exit $exitcode;
}