acl2-books-certs 6.3-5 / usr / share / acl2-6.3 / books / xdoc / topics.cert

(IN-PACKAGE "ACL2")
"ACL2 Version 6.3"
:BEGIN-PORTCULLIS-CMDS
(INCLUDE-BOOK "str/portcullis" :DIR :SYSTEM)
(INCLUDE-BOOK "oslib/portcullis" :DIR :SYSTEM)
(INCLUDE-BOOK "centaur/bridge/portcullis" :DIR :SYSTEM)
:END-PORTCULLIS-CMDS
:EXPANSION-ALIST
((2 RECORD-EXPANSION (DEFXDOC XDOC :SHORT "<i>XDOC</i> is a tool for documenting ACL2 books.  You can use it to
access documentation about ACL2 and its books, to document your own books, and
to create custom web-based manuals.  It is intended as a replacement for ACL2
facilities like @(see defdoc), @(':doc'), and so on." :LONG "<h3>Getting Documentation</h3>

<p>Most of the documentation below is about using XDOC to document your own
@(see acl2::books) and create manuals.  If you just want to browse the
documentation, you probably don't need to read any of this!  Instead, see
either:</p>

<ul>

<li><b>Online version.</b> If you expect to have an internet connection while
using the documentation, you may be happy with the <a
href='http://fv.centtech.com/acl2/latest/doc/'>online XDOC manual</a> hosted by
<a href='http://www.centtech.com/'>Centaur Technology</a>.  This version covers
the latest released version of ACL2 and the corresponding version of the <a
href='http://code.google.com/p/acl2-books/'>ACL2 Community Books</a>.</li>

<li><b>Local version.</b> If you sometimes work without an internet connection,
or are using development snapshots of ACL2 and need up-to-date documentation,
you can build a local version of the documentation.  You first need to build
ACL2(h), then certify the @('centaur/doc') book as follows:

@({
  cd acl2-sources/books
  make USE_QUICKLISP=1 centaur/doc.cert
})

After this is built, the manual should be available at:

@({acl2-sources/books/centaur/manual/index.html})</li>

</ul>

<h3>Documenting your Books</h3>

<p>To use XDOC to document your own books, the first step is:</p>

@({
 (include-book \"xdoc/top\" :dir :system)
})

<p>This book loads very quickly, requires no ttags, and provides a (nearly)
complete interface to the XDOC system, including:</p>

<ul>

<li>@(see defxdoc) and @(see defsection), which are the basic commands for
adding documentation &mdash; the XDOC alternatives to ACL2's @(see defdoc)
command.</li>

<li>The @(see save) command, which can be used to create web-based manuals for
your libraries.</li>

</ul>

<p>The @('xdoc/top') book hijacks the @(':doc') command by installing a new
<see topic='@(url ld-keyword-aliases)'>LD keyword alias</see>.  This way,
you (and your users) can see both ordinary ACL2 documentation and XDOC
documentation from the terminal by just using @(':doc'), without having to know
which documentation system was used to document which topic.</p>

<box><p><b><color rgb='#ff0000'>NEW</color></b> (experimental): When writing
documentation, you can now automatically have XDOC topics displayed as you
submit new @(see defxdoc) forms&mdash;just add:</p>

@({
 (include-book \"xdoc/debug\" :dir :system)
})

<p>to your @(see acl2::acl2-customization) file, or include it while you are
developing your book.  Afterward, whenever you submit each @(see defxdoc) form,
it will automatically be displayed in the terminal, showing you any markup
problems and giving you a quick, text-mode preview.</p></box>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS) (:SHORT . "<i>XDOC</i> is a tool for documenting ACL2 books.  You can use it to
access documentation about ACL2 and its books, to document your own books, and
to create custom web-based manuals.  It is intended as a replacement for ACL2
facilities like @(see defdoc), @(':doc'), and so on.") (:LONG . "<h3>Getting Documentation</h3>

<p>Most of the documentation below is about using XDOC to document your own
@(see acl2::books) and create manuals.  If you just want to browse the
documentation, you probably don't need to read any of this!  Instead, see
either:</p>

<ul>

<li><b>Online version.</b> If you expect to have an internet connection while
using the documentation, you may be happy with the <a
href='http://fv.centtech.com/acl2/latest/doc/'>online XDOC manual</a> hosted by
<a href='http://www.centtech.com/'>Centaur Technology</a>.  This version covers
the latest released version of ACL2 and the corresponding version of the <a
href='http://code.google.com/p/acl2-books/'>ACL2 Community Books</a>.</li>

<li><b>Local version.</b> If you sometimes work without an internet connection,
or are using development snapshots of ACL2 and need up-to-date documentation,
you can build a local version of the documentation.  You first need to build
ACL2(h), then certify the @('centaur/doc') book as follows:

@({
  cd acl2-sources/books
  make USE_QUICKLISP=1 centaur/doc.cert
})

After this is built, the manual should be available at:

@({acl2-sources/books/centaur/manual/index.html})</li>

</ul>

<h3>Documenting your Books</h3>

<p>To use XDOC to document your own books, the first step is:</p>

@({
 (include-book \"xdoc/top\" :dir :system)
})

<p>This book loads very quickly, requires no ttags, and provides a (nearly)
complete interface to the XDOC system, including:</p>

<ul>

<li>@(see defxdoc) and @(see defsection), which are the basic commands for
adding documentation &mdash; the XDOC alternatives to ACL2's @(see defdoc)
command.</li>

<li>The @(see save) command, which can be used to create web-based manuals for
your libraries.</li>

</ul>

<p>The @('xdoc/top') book hijacks the @(':doc') command by installing a new
<see topic='@(url ld-keyword-aliases)'>LD keyword alias</see>.  This way,
you (and your users) can see both ordinary ACL2 documentation and XDOC
documentation from the terminal by just using @(':doc'), without having to know
which documentation system was used to document which topic.</p>

<box><p><b><color rgb='#ff0000'>NEW</color></b> (experimental): When writing
documentation, you can now automatically have XDOC topics displayed as you
submit new @(see defxdoc) forms&mdash;just add:</p>

@({
 (include-book \"xdoc/debug\" :dir :system)
})

<p>to your @(see acl2::acl2-customization) file, or include it while you are
developing your book.  Afterward, whenever you submit each @(see defxdoc) form,
it will automatically be displayed in the terminal, showing you any markup
problems and giving you a quick, text-mode preview.</p></box>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC)))))) (4 RECORD-EXPANSION (DEFXDOC DEFXDOC :SHORT "Add documentation to the @(see xdoc) database." :LONG "<box><p>Note: @('defxdoc') is very basic.  You will usually want to
use @(see defsection) or @(see cutil::define) instead.</p></box>

<p>@('Defxdoc') is the XDOC alternative to ACL2's built-in @('defdoc')
command.</p>

<p>General form:</p>

@({
 (defxdoc name
   [:parents parents]
   [:short   short]
   [:long    long])
})

<p>Example:</p>

@({
 (defxdoc duplicity
   :parents (std/lists defsort count no-duplicatesp)
   :short \"@(call duplicity) counts how many times the
            element @('a') occurs within the string @('x').\"
   :long \"<p>This function is similar to ACL2's built-in
          @('count') function but is more limited:</p>  ...\")
})

<p>The @('name') of each documentation topic must be a symbol.  All of the
keyword arguments are optional:</p>

<ul>

<li>@('parents') let you associate this documentation with other topics.  A
topic may have many parents, but circular chains of parents are not allowed and
will lead to errors when generating manuals.  If no @(':parents') are given
explicitly, the <see topic='@(url set-default-parents)'>default parents</see>
will be used.</li>

<li>@('short') should be a short description of this topic that is suitable for
inlining in other pages.  For instance, it may be displayed in subtopic listing
and in \"hover\" text on navigation pages.</li>

<li>@('long') should be the full, detailed documentation for this topic.</li>

</ul>

<p>The @('short') and @('long') strings may be written using the XDOC @(see
markup) language, and may also use @(see preprocessor) commands to insert
function definitions, theorems, topic links, and so on.</p>

<p>Many examples of using XDOC can be found throughout the ACL2 books.  See for
instance the @(see acl2::std), @(see acl2::str) or @(see acl2::osets)
libraries.</p>

<h3>Note for Advanced Users</h3>

<p>XDOC just stores its documentation in an ordinary ACL2 table, so if you want
to do something like automatically generate documentation from macros, you
might decide to bypass @('defxdoc') and just manipulate the table directly.</p>

<p>It is not possible to directly use @('defxdoc') from raw Lisp, but you can
use @(see defxdoc-raw) instead.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . DEFXDOC) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Add documentation to the @(see xdoc) database.") (:LONG . "<box><p>Note: @('defxdoc') is very basic.  You will usually want to
use @(see defsection) or @(see cutil::define) instead.</p></box>

<p>@('Defxdoc') is the XDOC alternative to ACL2's built-in @('defdoc')
command.</p>

<p>General form:</p>

@({
 (defxdoc name
   [:parents parents]
   [:short   short]
   [:long    long])
})

<p>Example:</p>

@({
 (defxdoc duplicity
   :parents (std/lists defsort count no-duplicatesp)
   :short \"@(call duplicity) counts how many times the
            element @('a') occurs within the string @('x').\"
   :long \"<p>This function is similar to ACL2's built-in
          @('count') function but is more limited:</p>  ...\")
})

<p>The @('name') of each documentation topic must be a symbol.  All of the
keyword arguments are optional:</p>

<ul>

<li>@('parents') let you associate this documentation with other topics.  A
topic may have many parents, but circular chains of parents are not allowed and
will lead to errors when generating manuals.  If no @(':parents') are given
explicitly, the <see topic='@(url set-default-parents)'>default parents</see>
will be used.</li>

<li>@('short') should be a short description of this topic that is suitable for
inlining in other pages.  For instance, it may be displayed in subtopic listing
and in \"hover\" text on navigation pages.</li>

<li>@('long') should be the full, detailed documentation for this topic.</li>

</ul>

<p>The @('short') and @('long') strings may be written using the XDOC @(see
markup) language, and may also use @(see preprocessor) commands to insert
function definitions, theorems, topic links, and so on.</p>

<p>Many examples of using XDOC can be found throughout the ACL2 books.  See for
instance the @(see acl2::std), @(see acl2::str) or @(see acl2::osets)
libraries.</p>

<h3>Note for Advanced Users</h3>

<p>XDOC just stores its documentation in an ordinary ACL2 table, so if you want
to do something like automatically generate documentation from macros, you
might decide to bypass @('defxdoc') and just manipulate the table directly.</p>

<p>It is not possible to directly use @('defxdoc') from raw Lisp, but you can
use @(see defxdoc-raw) instead.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC DEFXDOC)))))) (5 RECORD-EXPANSION (DEFXDOC XDOC::MARKUP :SHORT "The <a href='http://en.wikipedia.org/wiki/Xml'>XML</a> markup
language that is the basis of XDOC documentation strings." :LONG "<p>XDOC uses an XML markup language that is similar to a subset of <a
href='http://en.wikipedia.org/wiki/HTML'>HTML</a>.  Note that in XML, beginning
and ending tags really need to be balanced.</p>

<h3>Formatting Text</h3>

<p>Various tags allow you to control the font:</p>
<ul>
 <li><b>&lt;b&gt;bold&lt;/b&gt;</b></li>
 <li><i>&lt;i&gt;italics&lt;/i&gt;</i></li>
 <li><u>&lt;u&gt;underline&lt;/u&gt;</u></li>
 <li><tt>&lt;tt&gt;typewriter text&lt;/tt&gt;</tt></li>
 <li><color rgb=\"#ff0000\">&lt;color rgb=&quot;#ff0000&quot;&gt;colored text&lt;/color&gt;</color></li>
 <li><sf>&lt;sf&gt;sans-serif&lt;/sf&gt;</sf></li>
</ul>

<h3>Displaying Source Code</h3>

<p>The @(see preprocessor) allows you to insert function definitions, theorems,
etc., from the ACL2 world.  This can help you avoid having to copy and paste
definitions into your documentation, which can help to keep your documentation
up to date.</p>

<p>But sometimes you want to write other kinds of code fragments as examples.
The raw markup options are:</p>

<ul>

<li>Use the @('<tt>') tag for short, inline pieces of code, such as <tt>(+ 1
x)</tt>.</li>

<li>Use the @('<code>') tag for longer code examples that should be indented
and \"preformatted,\" i.e., newlines and spaces should be preserved.</li>

</ul>

<p><b>However</b>, it's often better to use the preprocessor's
<tt>@@('...')</tt> and <tt>@@({...})</tt> macros, respectively.  These are nice
because they automatically escape special HTML characters like &lt; into
&amp;lt;, and also automatically add hyperlinks to documented functions.</p>

<p>Whenever you include Lisp code fragments in your documentation, you should
usually keep everything <b>indented one space</b> to prevent Emacs problems.
For instance:</p>

@({
|(defxdoc foo
|  :long \"<h3>How to format @('<code>') blocks</h3>
|
|<p>GOOD -- the form is indented one space:</p>
|<code>
| (my-lisp-form (foo ...)
|               (bar ...))
|</code>
|
|<p>BAD -- the form is directly on the left-margin:</p>
|<code>
|(my-lisp-form (foo ...)
|              (bar ...))
|</code>
})

<p>Without this leading space, Emacs can become confused and think that
@('(my-lisp-form ...)'), rather than @('(defxdoc foo ...)'), is the top-level
expression.  This can ruin syntax highlighting and also commands like @('C-t
e') for sending s-expressions to the @('*shell*') window.</p>




<h3>Hyperlinks</h3>

<p><i>Internal links</i> between documentation topics and <i>Emacs
tags-search links</i> into the source code are handled by the @(see
preprocessor).</p>

<p>You can add <i>external links</i> to web pages with ordinary HTML-style
links, e.g.,</p>

@({
<a href=\"http://www.centtech.com/\">Centaur Technology</a>
})

<p>Produces a link to <a href=\"http://www.centtech.com/\">Centaur
Technology</a>.</p>


<h3>Structuring Documents</h3>

<p>For section headings,</p>
<ul>
 <li>@('<h1>') creates the biggest heading:<h1>H1 Example</h1></li>
 <li>@('<h2>') the next biggest:<h2>H2 Example</h2></li>
 <li>@('<h3>') a medium-sized heading:<h3>H3 Example</h3></li>
 <li>@('<h4>') the second smallest:<h4>H4 Example</h4></li>
 <li>@('<h5>') the smallest heading:<h5>H5 Example</h5></li>
</ul>

<p>@('<p>') tags should be put around paragraphs.</p>

<blockquote>@('<blockquote>') can be used to create indented paragraphs like
this one.  (Let's put enough text here to make it word-wrap.  Mumble mumble
mumble.  Mumble.  Mumble mumble.)</blockquote>

<p>@('<br/>') can be used<br/>
to write haikus and so on<br/>
but is discouraged</p>

<p>Bulleted and numbered lists work as in HTML.  The list itself begins with
@('<ul>') (for bulleted lists) or @('<ol>') (for numbered lists).  Each list
element is an @('<li>') tag.  For instance,</p>

@({
<ul>
  <li>one</li>
  <li>two</li>
  <li>three</li>
</ul>
})

<p>Produces:</p>

<box>
<ul>
  <li>one</li>
  <li>two</li>
  <li>three</li>
</ul>
</box>

<p>You can also use definition lists, which are comprised of @('<dl>'),
@('<dt>'), and @('<dd>') tags.  For instance,</p>

@({
<dl>
  <dt>Inputs</dt>
  <dd><tt>x</tt>, the list we are traversing</dd>
  <dd><tt>max</tt>, limit on how many we can accumulate</dd>
  <dd><tt>acc</tt>, accumulator for our results</dd>
</dl>
})

<p>Produces:</p>

<box>
<dl>
  <dt>Inputs</dt>
  <dd><tt>x</tt>, the list we are traversing</dd>
  <dd><tt>max</tt>, limit on how many we can accumulate</dd>
  <dd><tt>acc</tt>, accumulator for our results</dd>
</dl>
</box>

<p>These framed boxes are generated with the @('<box>') tag.</p>

<p>It's relatively easy to add new tags.  We'll probably add some kind of image
support in the future, and maybe other tags that users want.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::MARKUP) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "The <a href='http://en.wikipedia.org/wiki/Xml'>XML</a> markup
language that is the basis of XDOC documentation strings.") (:LONG . "<p>XDOC uses an XML markup language that is similar to a subset of <a
href='http://en.wikipedia.org/wiki/HTML'>HTML</a>.  Note that in XML, beginning
and ending tags really need to be balanced.</p>

<h3>Formatting Text</h3>

<p>Various tags allow you to control the font:</p>
<ul>
 <li><b>&lt;b&gt;bold&lt;/b&gt;</b></li>
 <li><i>&lt;i&gt;italics&lt;/i&gt;</i></li>
 <li><u>&lt;u&gt;underline&lt;/u&gt;</u></li>
 <li><tt>&lt;tt&gt;typewriter text&lt;/tt&gt;</tt></li>
 <li><color rgb=\"#ff0000\">&lt;color rgb=&quot;#ff0000&quot;&gt;colored text&lt;/color&gt;</color></li>
 <li><sf>&lt;sf&gt;sans-serif&lt;/sf&gt;</sf></li>
</ul>

<h3>Displaying Source Code</h3>

<p>The @(see preprocessor) allows you to insert function definitions, theorems,
etc., from the ACL2 world.  This can help you avoid having to copy and paste
definitions into your documentation, which can help to keep your documentation
up to date.</p>

<p>But sometimes you want to write other kinds of code fragments as examples.
The raw markup options are:</p>

<ul>

<li>Use the @('<tt>') tag for short, inline pieces of code, such as <tt>(+ 1
x)</tt>.</li>

<li>Use the @('<code>') tag for longer code examples that should be indented
and \"preformatted,\" i.e., newlines and spaces should be preserved.</li>

</ul>

<p><b>However</b>, it's often better to use the preprocessor's
<tt>@@('...')</tt> and <tt>@@({...})</tt> macros, respectively.  These are nice
because they automatically escape special HTML characters like &lt; into
&amp;lt;, and also automatically add hyperlinks to documented functions.</p>

<p>Whenever you include Lisp code fragments in your documentation, you should
usually keep everything <b>indented one space</b> to prevent Emacs problems.
For instance:</p>

@({
|(defxdoc foo
|  :long \"<h3>How to format @('<code>') blocks</h3>
|
|<p>GOOD -- the form is indented one space:</p>
|<code>
| (my-lisp-form (foo ...)
|               (bar ...))
|</code>
|
|<p>BAD -- the form is directly on the left-margin:</p>
|<code>
|(my-lisp-form (foo ...)
|              (bar ...))
|</code>
})

<p>Without this leading space, Emacs can become confused and think that
@('(my-lisp-form ...)'), rather than @('(defxdoc foo ...)'), is the top-level
expression.  This can ruin syntax highlighting and also commands like @('C-t
e') for sending s-expressions to the @('*shell*') window.</p>




<h3>Hyperlinks</h3>

<p><i>Internal links</i> between documentation topics and <i>Emacs
tags-search links</i> into the source code are handled by the @(see
preprocessor).</p>

<p>You can add <i>external links</i> to web pages with ordinary HTML-style
links, e.g.,</p>

@({
<a href=\"http://www.centtech.com/\">Centaur Technology</a>
})

<p>Produces a link to <a href=\"http://www.centtech.com/\">Centaur
Technology</a>.</p>


<h3>Structuring Documents</h3>

<p>For section headings,</p>
<ul>
 <li>@('<h1>') creates the biggest heading:<h1>H1 Example</h1></li>
 <li>@('<h2>') the next biggest:<h2>H2 Example</h2></li>
 <li>@('<h3>') a medium-sized heading:<h3>H3 Example</h3></li>
 <li>@('<h4>') the second smallest:<h4>H4 Example</h4></li>
 <li>@('<h5>') the smallest heading:<h5>H5 Example</h5></li>
</ul>

<p>@('<p>') tags should be put around paragraphs.</p>

<blockquote>@('<blockquote>') can be used to create indented paragraphs like
this one.  (Let's put enough text here to make it word-wrap.  Mumble mumble
mumble.  Mumble.  Mumble mumble.)</blockquote>

<p>@('<br/>') can be used<br/>
to write haikus and so on<br/>
but is discouraged</p>

<p>Bulleted and numbered lists work as in HTML.  The list itself begins with
@('<ul>') (for bulleted lists) or @('<ol>') (for numbered lists).  Each list
element is an @('<li>') tag.  For instance,</p>

@({
<ul>
  <li>one</li>
  <li>two</li>
  <li>three</li>
</ul>
})

<p>Produces:</p>

<box>
<ul>
  <li>one</li>
  <li>two</li>
  <li>three</li>
</ul>
</box>

<p>You can also use definition lists, which are comprised of @('<dl>'),
@('<dt>'), and @('<dd>') tags.  For instance,</p>

@({
<dl>
  <dt>Inputs</dt>
  <dd><tt>x</tt>, the list we are traversing</dd>
  <dd><tt>max</tt>, limit on how many we can accumulate</dd>
  <dd><tt>acc</tt>, accumulator for our results</dd>
</dl>
})

<p>Produces:</p>

<box>
<dl>
  <dt>Inputs</dt>
  <dd><tt>x</tt>, the list we are traversing</dd>
  <dd><tt>max</tt>, limit on how many we can accumulate</dd>
  <dd><tt>acc</tt>, accumulator for our results</dd>
</dl>
</box>

<p>These framed boxes are generated with the @('<box>') tag.</p>

<p>It's relatively easy to add new tags.  We'll probably add some kind of image
support in the future, and maybe other tags that users want.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::MARKUP)))))) (6 RECORD-EXPANSION (DEFXDOC XDOC::PREPROCESSOR :SHORT "In addition to its @(see markup) language, XDOC includes a
preprocessor which can be used to interpret certain directives of the form
@('@(...)')." :LONG "<h3>Functions and Theorems</h3>

<p>To look up function definitions (or pieces of definitions) from the ACL2
world and insert them into your documentation, you can use:</p>

<ul>
 <li>@('@(def fn)'), insert the definition of <i>fn</i><br/>
     (also works for theorems, macros, ...)</li>
 <li>@('@(body fn)'), just the body of <i>fn</i></li>
 <li>@('@(formals fn)'), just the formals of <i>fn</i></li>
 <li>@('@(measure fn)'), just the measure of <i>fn</i></li>
 <li>@('@(call fn)'), a generic function call of <i>fn</i></li>
</ul>

<p>We expect that @('def') and @('body') directives will expand to large code
fragments, so they are automatically wrapped in @('<code>') blocks.</p>

<p>The @('call') directive is automatically wrapped in @('<tt>') tags, i.e.,
@('@(call fib)') might become @('<tt>(fib x)</tt>').  An alternative is to use
@('@(ccall fib)'), for \"code call,\" which inserts @('<code>') tags instead;
this could be more appropriate for functions with many arguments.</p>

<p>The other directives just become plain text, and you can wrap whatever
formatting commands you like around them and use them inline in paragraphs,
etc.</p>

<h3>Adding Examples or Code Fragments</h3>

<p>There's a special syntax to put in \"raw\" text.  This is especially
useful for examples and code fragments.</p>

<ul>
<li><tt>@@('...')</tt> inserts @('...') into @('<tt>') tags.</li>
<li><tt>@@({...})</tt> inserts @('...') into @('<code>') tags.</li>
</ul>

<p>These have a special feature for automatically linking to documented topics.
For instance, <tt>@@('consp x')</tt> produces @('(consp x)'), and
<tt>@@({ (consp x) })</tt> produces:</p>

@({
 (consp x)
})


<h3>Documentation Links</h3>

<p>The easiest way to link between topics is to use @('@(see name)'), which
expands into a link to @('name').  The text shown to the reader is just the
name of the topic, in lower case.  Note also that @('@(csee name)') can be used
for links whose first letter should be capitalized.</p>

<p>For most purposes, @('@(see name)') is adequate and it is also recommended.
Finer-grained control (e.g., changing the link text) is also possible, but then
you have to understand how file names get mangled.  The basic story is that
@('@(see name)') expands to:</p>

@({
<see topic=\"mangled-topic-name\">printed-topic-name</see>
})

<p>Where:</p>

<ul>

<li>@('mangled-topic-name') is a canonical, url/file-name friendly,
human-hostile mangling of @('name')'s package and symbol names, and</li>

<li>@('printed-topic-name') is an XML-escaped variant of @('name'), e.g., where
@('<') becomes @('&lt;'), etc.; depending on the package of the current topic's
name, it may or may not include the package portion of @('name').</li>

</ul>

<p>So, to support custom links, we provide</p>

<ul>
 <li>@('@(url name)'), which expands to @('mangled-topic-name')</li>
 <li>@('@(sym name)'), which expands to @('printed-topic-name')</li>
 <li>@('@(csym name)'), like @('sym'), but with the first letter capitalized</li>
</ul>

<p>You can use these to write your own @('<see>') tags.  You should probably
<i>never</i> write a @('<see>') tag yourself without using @('@(url ...)').</p>


<h3>Emacs Links</h3>

<p>The @('@(srclink name)') directive inserts a source-code link for users who
have configured their web browser as described in @(see emacs-links).</p>

<p>It is often unnecessary to use @('srclink') directly, because these links
are automatically inserted by @('@(def fn)').  One good reason to use
@('srclink') is to link to macros like @(srclink defxdoc), which often are
written using backquote and hence do not display nicely.</p>

<p>Source links are sometimes inappropriate, e.g., for definitions or theorems
that are generated by macros.  You can suppress the automatic source links on
@('def') commands by using @('@(gdef fn)') instead.  This stands for
\"generated definition.\"</p>


<h3>Escaping of @</h3>

<p>Since @('@(') is intercepted by the preprocessor, you may occasionally need
to escape it.  You can write @('@@') to generate a single @('@') sign.</p>

<p>Besides @('@(') and @('@@'), the preprocessor leaves any other uses of
@('@') in tact.  So, most uses of @('@'), such as in email addresses, do not
need to be escaped.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::PREPROCESSOR) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "In addition to its @(see markup) language, XDOC includes a
preprocessor which can be used to interpret certain directives of the form
@('@(...)').") (:LONG . "<h3>Functions and Theorems</h3>

<p>To look up function definitions (or pieces of definitions) from the ACL2
world and insert them into your documentation, you can use:</p>

<ul>
 <li>@('@(def fn)'), insert the definition of <i>fn</i><br/>
     (also works for theorems, macros, ...)</li>
 <li>@('@(body fn)'), just the body of <i>fn</i></li>
 <li>@('@(formals fn)'), just the formals of <i>fn</i></li>
 <li>@('@(measure fn)'), just the measure of <i>fn</i></li>
 <li>@('@(call fn)'), a generic function call of <i>fn</i></li>
</ul>

<p>We expect that @('def') and @('body') directives will expand to large code
fragments, so they are automatically wrapped in @('<code>') blocks.</p>

<p>The @('call') directive is automatically wrapped in @('<tt>') tags, i.e.,
@('@(call fib)') might become @('<tt>(fib x)</tt>').  An alternative is to use
@('@(ccall fib)'), for \"code call,\" which inserts @('<code>') tags instead;
this could be more appropriate for functions with many arguments.</p>

<p>The other directives just become plain text, and you can wrap whatever
formatting commands you like around them and use them inline in paragraphs,
etc.</p>

<h3>Adding Examples or Code Fragments</h3>

<p>There's a special syntax to put in \"raw\" text.  This is especially
useful for examples and code fragments.</p>

<ul>
<li><tt>@@('...')</tt> inserts @('...') into @('<tt>') tags.</li>
<li><tt>@@({...})</tt> inserts @('...') into @('<code>') tags.</li>
</ul>

<p>These have a special feature for automatically linking to documented topics.
For instance, <tt>@@('consp x')</tt> produces @('(consp x)'), and
<tt>@@({ (consp x) })</tt> produces:</p>

@({
 (consp x)
})


<h3>Documentation Links</h3>

<p>The easiest way to link between topics is to use @('@(see name)'), which
expands into a link to @('name').  The text shown to the reader is just the
name of the topic, in lower case.  Note also that @('@(csee name)') can be used
for links whose first letter should be capitalized.</p>

<p>For most purposes, @('@(see name)') is adequate and it is also recommended.
Finer-grained control (e.g., changing the link text) is also possible, but then
you have to understand how file names get mangled.  The basic story is that
@('@(see name)') expands to:</p>

@({
<see topic=\"mangled-topic-name\">printed-topic-name</see>
})

<p>Where:</p>

<ul>

<li>@('mangled-topic-name') is a canonical, url/file-name friendly,
human-hostile mangling of @('name')'s package and symbol names, and</li>

<li>@('printed-topic-name') is an XML-escaped variant of @('name'), e.g., where
@('<') becomes @('&lt;'), etc.; depending on the package of the current topic's
name, it may or may not include the package portion of @('name').</li>

</ul>

<p>So, to support custom links, we provide</p>

<ul>
 <li>@('@(url name)'), which expands to @('mangled-topic-name')</li>
 <li>@('@(sym name)'), which expands to @('printed-topic-name')</li>
 <li>@('@(csym name)'), like @('sym'), but with the first letter capitalized</li>
</ul>

<p>You can use these to write your own @('<see>') tags.  You should probably
<i>never</i> write a @('<see>') tag yourself without using @('@(url ...)').</p>


<h3>Emacs Links</h3>

<p>The @('@(srclink name)') directive inserts a source-code link for users who
have configured their web browser as described in @(see emacs-links).</p>

<p>It is often unnecessary to use @('srclink') directly, because these links
are automatically inserted by @('@(def fn)').  One good reason to use
@('srclink') is to link to macros like @(srclink defxdoc), which often are
written using backquote and hence do not display nicely.</p>

<p>Source links are sometimes inappropriate, e.g., for definitions or theorems
that are generated by macros.  You can suppress the automatic source links on
@('def') commands by using @('@(gdef fn)') instead.  This stands for
\"generated definition.\"</p>


<h3>Escaping of @</h3>

<p>Since @('@(') is intercepted by the preprocessor, you may occasionally need
to escape it.  You can write @('@@') to generate a single @('@') sign.</p>

<p>Besides @('@(') and @('@@'), the preprocessor leaves any other uses of
@('@') in tact.  So, most uses of @('@'), such as in email addresses, do not
need to be escaped.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::PREPROCESSOR)))))) (7 RECORD-EXPANSION (DEFXDOC XDOC::SAVE :SHORT "Saves the XDOC database into files for web browsers, etc." :LONG "<p>Once you have documented your library with @(see defxdoc), you may
wish to create a manual that can be viewed from a web browser.</p>

<h3>Saving a Manual</h3>

<p>The @('xdoc::save') command allows you to export all currently-loaded
documented topics from ACL2.  Here's a basic example:</p>

@({
 ;; get documentation loaded
 (include-book \"my-library1\")
 (include-book \"my-library2\")
 ;; save the manual
 (xdoc::save \"/home/jared/mylib-manual\")
})

<p>The only required argument is the name of a directory where the
documentation should be saved.  If the directory does not exist, it will be
created.  If there are files in the directory, they <color rgb=\"#ff0000\">may
be overwritten</color>.</p>

<h3>Types of Manuals</h3>

<p>XDOC can actually generate two kinds of manuals.</p>

<ul>
<li>By default, a @(see fancy-manual) is produced.</li>

<li>Alternately, you can create a @(see classic-manual) by using
@(':type :classic') in your save command.</li> </ul>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::SAVE) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Saves the XDOC database into files for web browsers, etc.") (:LONG . "<p>Once you have documented your library with @(see defxdoc), you may
wish to create a manual that can be viewed from a web browser.</p>

<h3>Saving a Manual</h3>

<p>The @('xdoc::save') command allows you to export all currently-loaded
documented topics from ACL2.  Here's a basic example:</p>

@({
 ;; get documentation loaded
 (include-book \"my-library1\")
 (include-book \"my-library2\")
 ;; save the manual
 (xdoc::save \"/home/jared/mylib-manual\")
})

<p>The only required argument is the name of a directory where the
documentation should be saved.  If the directory does not exist, it will be
created.  If there are files in the directory, they <color rgb=\"#ff0000\">may
be overwritten</color>.</p>

<h3>Types of Manuals</h3>

<p>XDOC can actually generate two kinds of manuals.</p>

<ul>
<li>By default, a @(see fancy-manual) is produced.</li>

<li>Alternately, you can create a @(see classic-manual) by using
@(':type :classic') in your save command.</li> </ul>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::SAVE)))))) (8 RECORD-EXPANSION (DEFXDOC XDOC::CLASSIC-MANUAL :PARENTS (XDOC::SAVE) :SHORT "Structure of a @(':type :classic') manual." :LONG "<p>If you run @(see save) with @(':type :classic'), it will write out
a manual in the \"classic\" format.  In this case, the resulting manual
directory will include:</p>

<ul>

<li>@('xml/'), a subdirectory with a @('.xml') file for each topic and some
supporting files, and</li>

<li>@('Makefile'), a Makefile for converting these files into other formats,
and</li>

<li>@('preview.html'), a web page that lets you directly view the XML files
using your web browser.</li>

</ul>

<p>Many web browsers can directly display XML files, so you may be able to view
@('preview.html') without any additional steps.</p>


<h3>HTML and Other Formats</h3>

<p>You can generate a plain HTML or TEXT version of your manual by using
@('make html') or @('make text') from within the directory target of the above
mentioned @('xdoc::save') command (in this example, the @('mylib-manual')
directory).  We might add support for TEXINFO or other formats in the
future.</p>

<p>After running @('make html'), you may wish to open @('frames2.html') and
@('frames3.html'), which allow you to navigate the HTML manual much like
@('preview.html') allows you to navigate the XML version.  These pages accept
an optional argument named <tt>topic</tt> that tells the browser to
automatically go to a particular topic.  For example, one can go to the
<tt>XDOC::save</tt> topic by using the url
<tt>frames3.html?topic=XDOC____SAVE.html</tt>.</p>

<p>Converting to HTML is a good idea because it ensures that all of your tags
are balanced on every page.  Without this sanity check, your manual might
contain errors that will prevent some topics from being loaded in a web
browser.</p>

<p>Creating the HTML code requires Xalan-C++.  Xalan is distributed with many
Linux distributions.  For example, on Ubuntu, one can run <tt>sudo apt-get
install xalan</tt> to install it.  Alternatively, see <a
href=\"http://xml.apache.org/xalan-c/\">Apache Xalan</a> to download.  We have
accomodated the various versions of Xalan that we know about and use, but we
welcome modifications to file <tt>support/Makefile-trans</tt> if you wish to
use a version we do not currently support.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::CLASSIC-MANUAL) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC::SAVE) (:SHORT . "Structure of a @(':type :classic') manual.") (:LONG . "<p>If you run @(see save) with @(':type :classic'), it will write out
a manual in the \"classic\" format.  In this case, the resulting manual
directory will include:</p>

<ul>

<li>@('xml/'), a subdirectory with a @('.xml') file for each topic and some
supporting files, and</li>

<li>@('Makefile'), a Makefile for converting these files into other formats,
and</li>

<li>@('preview.html'), a web page that lets you directly view the XML files
using your web browser.</li>

</ul>

<p>Many web browsers can directly display XML files, so you may be able to view
@('preview.html') without any additional steps.</p>


<h3>HTML and Other Formats</h3>

<p>You can generate a plain HTML or TEXT version of your manual by using
@('make html') or @('make text') from within the directory target of the above
mentioned @('xdoc::save') command (in this example, the @('mylib-manual')
directory).  We might add support for TEXINFO or other formats in the
future.</p>

<p>After running @('make html'), you may wish to open @('frames2.html') and
@('frames3.html'), which allow you to navigate the HTML manual much like
@('preview.html') allows you to navigate the XML version.  These pages accept
an optional argument named <tt>topic</tt> that tells the browser to
automatically go to a particular topic.  For example, one can go to the
<tt>XDOC::save</tt> topic by using the url
<tt>frames3.html?topic=XDOC____SAVE.html</tt>.</p>

<p>Converting to HTML is a good idea because it ensures that all of your tags
are balanced on every page.  Without this sanity check, your manual might
contain errors that will prevent some topics from being loaded in a web
browser.</p>

<p>Creating the HTML code requires Xalan-C++.  Xalan is distributed with many
Linux distributions.  For example, on Ubuntu, one can run <tt>sudo apt-get
install xalan</tt> to install it.  Alternatively, see <a
href=\"http://xml.apache.org/xalan-c/\">Apache Xalan</a> to download.  We have
accomodated the various versions of Xalan that we know about and use, but we
welcome modifications to file <tt>support/Makefile-trans</tt> if you wish to
use a version we do not currently support.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::CLASSIC-MANUAL)))))) (9 RECORD-EXPANSION (DEFXDOC XDOC::FANCY-MANUAL :PARENTS (XDOC::SAVE) :SHORT "Structure of a @(':type :fancy') manual." :LONG "<p>By default, @(see save) will create a manual in the new, \"fancy\"
format, which extensively uses JavaScript to provide rich documentation with
dynamic navigation, quick jump-to links, and so forth.</p>

<p>In many ways, a fancy manual is simpler than a @(see classic-manual).
Instead of generating thousands of files ahead of time, we basically just write
the XDOC database out into JSON format and then use JavaScript to do all of the
layout and organization.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::FANCY-MANUAL) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC::SAVE) (:SHORT . "Structure of a @(':type :fancy') manual.") (:LONG . "<p>By default, @(see save) will create a manual in the new, \"fancy\"
format, which extensively uses JavaScript to provide rich documentation with
dynamic navigation, quick jump-to links, and so forth.</p>

<p>In many ways, a fancy manual is simpler than a @(see classic-manual).
Instead of generating thousands of files ahead of time, we basically just write
the XDOC database out into JSON format and then use JavaScript to do all of the
layout and organization.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::FANCY-MANUAL)))))) (10 RECORD-EXPANSION (DEFXDOC XDOC::EMACS-LINKS :SHORT "Instructions for integrating XDOC web pages with <a
  href='http://www.gnu.org/software/emacs/'>Emacs</a>." :LONG "<p>@(csee preprocessor) directives such as @('@(def get-xdoc-table)')
result in the introduction of special links for Emacs.  Here's what these links
look like:</p>

@(def get-xdoc-table)

<p>Depending on your environment, it <b>may</b> be easy to configure your web
browser so that clicking on these links will cause Emacs to directly open up
the appropriate source file and jump to the named function.</p>

<p>The basic idea is:</p>

<ul>

<li>Each Emacs link generates a <a
href='https://en.wikipedia.org/wiki/Data_URI_scheme'>Data URIs</a> that tells
your web browser to download a new, generated file whose <a
href='https://en.wikipedia.org/wiki/Internet_media_type'>MIME type</a> is
@('application/x-acl2-xdoc-link').</li>

<li>You configure your web browser to send @('application/x-acl2-xdoc-link')
files to Emacs.</li>

<li>You configure your Emacs to carry out a tags search instead of loading
these files.</li>

</ul>

<p>The net effect is that clicking on these links will send you directly to the
desired function in the source code.  This is <b>really slick</b> if you can
get it working.</p>


<h2>Configuring Emacs</h2>

<h4>Loading the XDOC Elisp</h4>

<p>The XDOC directory includes a file called @('xdoc.el'), which tells emacs
what to do with these xdoc-link files.  To tell emacs to load this file at
startup, you can just add a command to your @('.emacs') file like:</p>

@({
 (load \"/path/to/acl2/books/xdoc/xdoc.el\")
})


<h4>Managing your TAGS tables</h4>

<p>For emacs to make sense of the links you follow, it will need to have the
appropriate <a
href=\"http://www.gnu.org/software/emacs/manual/html_node/emacs/Tags.html\">tags
tables</a> loaded for all of the libraries you are using.</p>

<p>If you aren't familiar with tags, you basically just need to:</p>

<ul>

<li>Occasionally generate @('TAGS') files for your libraries, using the command
@('etags *.lisp') or similar.</li>

<li>Tell Emacs to \"visit\" these tags tables with @('visit-tags-table').</li>

</ul>

<h5>Jared's Approach:</h5>

<ul>

<li>I add a @('TAGS') target to my Makefiles, so that when I build my library
the @('etags *.lisp') command is re-run and the @('TAGS') file is kept up to
date.  The Makefile syntax is:

@({
TAGS: $(wildcard *.lisp)
      etags *.lisp
})</li>

<li>Then, in my @('.emacs') file, I have a series of commands like the
following:

@({
 (ignore-errors (visit-tags-table \"/path/to/acl2/TAGS\"))
 (ignore-errors (visit-tags-table \"/path/to/acl2/books/xdoc/TAGS\"))
 (ignore-errors (visit-tags-table \"/path/to/my/stuff/TAGS\"))
})

This ensures that the relevant @('TAGS') files are loaded every time I start
Emacs.  The use of @('ignore-errors') prevents Emacs from complaining if one of
these @('TAGS') files was deleted in a \"make clean\" or similar.</li>

<li>One final addition to the @('.emacs') file is:

@({
 (setq tags-revert-without-query t)
})

which tells Emacs to go ahead and reload these files when they are rebuilt by
Make, instead of prompting you if you want to reload them.</li>

</ul>


<h4>Setting up Emacsclient (recommended)</h4>

<p>You can set things up so that links open up in <b>new instances</b> of
Emacs, or in <b>new buffers</b> of an already-running Emacs.</p>

<p>If you want everything to open up in a new instance of Emacs, you can skip
this section.  But I prefer to use a single Emacs for everything, and just have
links open up in new buffers.</p>

<p>This is quite easy.  First, add @('(server-start)') to your @('.emacs') file
and restart Emacs.</p>

<p>Next, to ensure everything is working properly, launch a separate terminal
and type:</p>

@({
emacsclient --no-wait my-file
})

<p>If all is well, @('my-file') will be loaded into your already-running emacs
as a new buffer.</p>



<h2>Configuring the Web Browser</h2>

<p>The last thing we need to do is instruct your web browser to send xdoc-link
files to Emacs.</p>

<p>How to do this depends on your web browser and/or operating system.  In some
cases it may be hard to pass command-line options to emacs directly, so you may
find it useful to use the script @('emacsclient-wrapper.sh'), found in the xdoc
directory.</p>

<p>The basic starting point is probably to try to click on an emacs link like
@(srclink append) and try to tell your browser to open it with the
@('emacsclient-wrapper.sh') script.  If your browser opens it with some other
program, you might need to edit the default file associations of your operating
system or window manager.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::EMACS-LINKS) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Instructions for integrating XDOC web pages with <a
  href='http://www.gnu.org/software/emacs/'>Emacs</a>.") (:LONG . "<p>@(csee preprocessor) directives such as @('@(def get-xdoc-table)')
result in the introduction of special links for Emacs.  Here's what these links
look like:</p>

@(def get-xdoc-table)

<p>Depending on your environment, it <b>may</b> be easy to configure your web
browser so that clicking on these links will cause Emacs to directly open up
the appropriate source file and jump to the named function.</p>

<p>The basic idea is:</p>

<ul>

<li>Each Emacs link generates a <a
href='https://en.wikipedia.org/wiki/Data_URI_scheme'>Data URIs</a> that tells
your web browser to download a new, generated file whose <a
href='https://en.wikipedia.org/wiki/Internet_media_type'>MIME type</a> is
@('application/x-acl2-xdoc-link').</li>

<li>You configure your web browser to send @('application/x-acl2-xdoc-link')
files to Emacs.</li>

<li>You configure your Emacs to carry out a tags search instead of loading
these files.</li>

</ul>

<p>The net effect is that clicking on these links will send you directly to the
desired function in the source code.  This is <b>really slick</b> if you can
get it working.</p>


<h2>Configuring Emacs</h2>

<h4>Loading the XDOC Elisp</h4>

<p>The XDOC directory includes a file called @('xdoc.el'), which tells emacs
what to do with these xdoc-link files.  To tell emacs to load this file at
startup, you can just add a command to your @('.emacs') file like:</p>

@({
 (load \"/path/to/acl2/books/xdoc/xdoc.el\")
})


<h4>Managing your TAGS tables</h4>

<p>For emacs to make sense of the links you follow, it will need to have the
appropriate <a
href=\"http://www.gnu.org/software/emacs/manual/html_node/emacs/Tags.html\">tags
tables</a> loaded for all of the libraries you are using.</p>

<p>If you aren't familiar with tags, you basically just need to:</p>

<ul>

<li>Occasionally generate @('TAGS') files for your libraries, using the command
@('etags *.lisp') or similar.</li>

<li>Tell Emacs to \"visit\" these tags tables with @('visit-tags-table').</li>

</ul>

<h5>Jared's Approach:</h5>

<ul>

<li>I add a @('TAGS') target to my Makefiles, so that when I build my library
the @('etags *.lisp') command is re-run and the @('TAGS') file is kept up to
date.  The Makefile syntax is:

@({
TAGS: $(wildcard *.lisp)
      etags *.lisp
})</li>

<li>Then, in my @('.emacs') file, I have a series of commands like the
following:

@({
 (ignore-errors (visit-tags-table \"/path/to/acl2/TAGS\"))
 (ignore-errors (visit-tags-table \"/path/to/acl2/books/xdoc/TAGS\"))
 (ignore-errors (visit-tags-table \"/path/to/my/stuff/TAGS\"))
})

This ensures that the relevant @('TAGS') files are loaded every time I start
Emacs.  The use of @('ignore-errors') prevents Emacs from complaining if one of
these @('TAGS') files was deleted in a \"make clean\" or similar.</li>

<li>One final addition to the @('.emacs') file is:

@({
 (setq tags-revert-without-query t)
})

which tells Emacs to go ahead and reload these files when they are rebuilt by
Make, instead of prompting you if you want to reload them.</li>

</ul>


<h4>Setting up Emacsclient (recommended)</h4>

<p>You can set things up so that links open up in <b>new instances</b> of
Emacs, or in <b>new buffers</b> of an already-running Emacs.</p>

<p>If you want everything to open up in a new instance of Emacs, you can skip
this section.  But I prefer to use a single Emacs for everything, and just have
links open up in new buffers.</p>

<p>This is quite easy.  First, add @('(server-start)') to your @('.emacs') file
and restart Emacs.</p>

<p>Next, to ensure everything is working properly, launch a separate terminal
and type:</p>

@({
emacsclient --no-wait my-file
})

<p>If all is well, @('my-file') will be loaded into your already-running emacs
as a new buffer.</p>



<h2>Configuring the Web Browser</h2>

<p>The last thing we need to do is instruct your web browser to send xdoc-link
files to Emacs.</p>

<p>How to do this depends on your web browser and/or operating system.  In some
cases it may be hard to pass command-line options to emacs directly, so you may
find it useful to use the script @('emacsclient-wrapper.sh'), found in the xdoc
directory.</p>

<p>The basic starting point is probably to try to click on an emacs link like
@(srclink append) and try to tell your browser to open it with the
@('emacsclient-wrapper.sh') script.  If your browser opens it with some other
program, you might need to edit the default file associations of your operating
system or window manager.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::EMACS-LINKS)))))) (11 RECORD-EXPANSION (DEFXDOC XDOC::GO.XDOC-LINK :PARENTS (XDOC::EMACS-LINKS) :SHORT "Trivial web service provided by @('fv.centtech.com') for resolving
@(see emacs-links)." :LONG "<p>Historically, @(see emacs-links) were implemented by writing out a
separate @('xdoc-link') file for every tags-search that we wanted to support.
To avoid writing out these thousands of files, we now just implement a simple
web service at @('fv.centtech.com').</p>

<p>The basic idea is that if you just go to:</p>

@('http://fv.centtech.com/cgi-bin/go.xdoc-link?name=append')

<p>Then it will generate an appropriate @('.xdoc-link') file that is flagged
with the right mime-type.</p>

<p>If you prefer to use your own web server, you can recreate this service by
putting the following, trivial script into your cgi-bin:</p>

@({
    #!/usr/bin/perl

    use warnings;
    use strict;
    use CGI qw(:standard);

    my $name = param(\"name\") || \"APPEND\";

    $| = 1;

    print <<END;
    Content-Type: application/x-acl2-xdoc-link .xdoc-link

    ; This is an XDOC Link file.
    ; Ordinarily, you should not see this file.
    ;
    ; If you are viewing this file in a web browser, you probably
    ; have not configured your web browser to send .xdoc-link files
    ; to Emacs.
    ;
    ; If you are viewing this file in Emacs, you probably have not
    ; loaded xdoc.el from the xdoc/ directory.
    ;
    ; Please see the XDOC manual for more information.

    $name

    END
})") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::GO.XDOC-LINK) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC::EMACS-LINKS) (:SHORT . "Trivial web service provided by @('fv.centtech.com') for resolving
@(see emacs-links).") (:LONG . "<p>Historically, @(see emacs-links) were implemented by writing out a
separate @('xdoc-link') file for every tags-search that we wanted to support.
To avoid writing out these thousands of files, we now just implement a simple
web service at @('fv.centtech.com').</p>

<p>The basic idea is that if you just go to:</p>

@('http://fv.centtech.com/cgi-bin/go.xdoc-link?name=append')

<p>Then it will generate an appropriate @('.xdoc-link') file that is flagged
with the right mime-type.</p>

<p>If you prefer to use your own web server, you can recreate this service by
putting the following, trivial script into your cgi-bin:</p>

@({
    #!/usr/bin/perl

    use warnings;
    use strict;
    use CGI qw(:standard);

    my $name = param(\"name\") || \"APPEND\";

    $| = 1;

    print <<END;
    Content-Type: application/x-acl2-xdoc-link .xdoc-link

    ; This is an XDOC Link file.
    ; Ordinarily, you should not see this file.
    ;
    ; If you are viewing this file in a web browser, you probably
    ; have not configured your web browser to send .xdoc-link files
    ; to Emacs.
    ;
    ; If you are viewing this file in Emacs, you probably have not
    ; loaded xdoc.el from the xdoc/ directory.
    ;
    ; Please see the XDOC manual for more information.

    $name

    END
})") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::GO.XDOC-LINK)))))) (12 RECORD-EXPANSION (DEFXDOC XDOC::EXTRACT-KEYWORD-FROM-ARGS :PARENTS (DEFSECTION) :SHORT "Get the value for a keyword argument like @(':foo value')." :LONG "<p>@(call extract-keyword-from-args) is given @('kwd'), which should
be a keyword symbol, and a list of @('args') which are typically the @('&rest
args') given to a macro.  It scans the list of @('args'), looking for the
indicated keyword, and returns @('(kwd . value)'), or @('nil') if no such
keyword is found.  For instance,</p>

@({
 (extract-keyword-from-args :bar '(:foo 3 :bar 5 :baz 7))
   -->
 (:bar . 5)
})

<p>This function is mainly useful for writing macros that mix @('&rest') parts
with keyword arguments.  See also @(see throw-away-keyword-parts).</p>

@(def extract-keyword-from-args)") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::EXTRACT-KEYWORD-FROM-ARGS) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS DEFSECTION) (:SHORT . "Get the value for a keyword argument like @(':foo value').") (:LONG . "<p>@(call extract-keyword-from-args) is given @('kwd'), which should
be a keyword symbol, and a list of @('args') which are typically the @('&rest
args') given to a macro.  It scans the list of @('args'), looking for the
indicated keyword, and returns @('(kwd . value)'), or @('nil') if no such
keyword is found.  For instance,</p>

@({
 (extract-keyword-from-args :bar '(:foo 3 :bar 5 :baz 7))
   -->
 (:bar . 5)
})

<p>This function is mainly useful for writing macros that mix @('&rest') parts
with keyword arguments.  See also @(see throw-away-keyword-parts).</p>

@(def extract-keyword-from-args)") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::EXTRACT-KEYWORD-FROM-ARGS)))))) (13 RECORD-EXPANSION (DEFXDOC XDOC::THROW-AWAY-KEYWORD-PARTS :PARENTS (DEFSECTION) :SHORT "Throw away any keyword arguments and their values from a macro
argument list." :LONG "<p>@(call throw-away-keyword-parts) is given a list of arguments that
are typically the @('&rest args') given to a macro.  It scans the arguments for
any keyword symbols such as @(':foo'), and throws away both the keyword and the
argument that follows it.  For instance,</p>

@({
 (throw-away-keyword-parts '(x y z :foo 3 :bar 5 blah blah blah))
   -->
 '(x y z blah blah blah)
})

<p>This function is mainly useful for writing macros that mix @('&rest') parts
with keyword arguments.  See also @(see extract-keyword-from-args).</p>

@(def throw-away-keyword-parts)") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::THROW-AWAY-KEYWORD-PARTS) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS DEFSECTION) (:SHORT . "Throw away any keyword arguments and their values from a macro
argument list.") (:LONG . "<p>@(call throw-away-keyword-parts) is given a list of arguments that
are typically the @('&rest args') given to a macro.  It scans the arguments for
any keyword symbols such as @(':foo'), and throws away both the keyword and the
argument that follows it.  For instance,</p>

@({
 (throw-away-keyword-parts '(x y z :foo 3 :bar 5 blah blah blah))
   -->
 '(x y z blah blah blah)
})

<p>This function is mainly useful for writing macros that mix @('&rest') parts
with keyword arguments.  See also @(see extract-keyword-from-args).</p>

@(def throw-away-keyword-parts)") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::THROW-AWAY-KEYWORD-PARTS)))))) (14 RECORD-EXPANSION (DEFXDOC DEFSECTION :SHORT "Fancy @('(encapsulate nil ...)') with a name and @(see xdoc)
support." :LONG "<p>The main reasons to use @('defsection') instead of @('(encapsulate
nil ...)')</p>

<ul>
 <li>It is easier to identify in the @(':pbt') history,</li>
 <li>It indents more nicely than @('encapsulate') in a vanilla emacs,</li>
 <li>It settles the question of where to put the @(see defxdoc) command, and</li>
 <li>It can automatically add the definitions/theorems you supply into the
     documentation for your section.</li>
</ul>

<p>General form:</p>

@({
 (defsection name
    [:parents   parents]
    [:short     short]
    [:long      long]
    [:autodoc   autodoc]
    [:extension topic]
    ... events ...)
})

<p>Example:</p>

@({
 (defsection foo
   :parents (parent1 parent2 ...)
   :short \"@(call foo) is like @(see bar), but better when...\"
   :long \"<p>The main differences between @('foo') and @('bar') are ...</p>\"

   (defund foo (x) ...)
   (local (in-theory (enable foo)))
   (defthm foo-thm1 ...)
   (defthm foo-thm2 ...))
})

<box><p>Note: this example might be better written as a @(see cutil::define),
which is much like a @('defsection') but has additional features.</p></box>


<h3>Ordinary Sections</h3>

<p>The @(':parents'), @(':short'), and @(':long') keywords are optional.  If
any of these keywords are provided, they will be used to introduce a @(see
defxdoc) command; otherwise no documentation will be generated.</p>

<p>By default, the @(':long') string you give will be automatically extended
with a \"Definitions and Theorems\" part that lists all the (non-local)
definitions and theorems introduced in the section.  This makes it easy to keep
the documentation up-to-date as you add and remove theorems to the section.  In
the above example, the @(':long') field would be extended with:</p>

@({
 <h3>Definition and Theorems</h3>
 @(def foo)
 @(thm foo-thm1)
 @(thm foo-thm2)
})

<p>If you do not want this automatic documentation, you can turn it off with
@(':autodoc nil').</p>


<h3>Extended Sections</h3>

<p>The @(':extension') keyword allows you to say that this section is a
continuation of a previously introduced concept.  When @(':extension topic') is
provided, then @('topic') must be the name of a previously documented @(see
xdoc) section, and you are not allowed to use @(':parents') or @(':short')
since the topic already exists.</p>

<p>The main purpose of an @(':extension') section is to add additional
documentation, either via the @(':long') string or via the automatic
documentation generation features of @('defsection').  The documentation
obtained this way is just appended onto the existing @(':long') for the
topic.</p>

<p>For example, if we have already given the section @('foo') with basic
theorems, above we now want to add a bunch of additional \"advanced\" theorems
about it, we might write something like this:</p>

@({
 (defsection advanced-theorems-about-foo
   :extension foo
   (defthm foo-thm3 ...)
   (defthm foo-thm4 ...))
})

<p>This will then append the definitions of @('foo-thm3') and @('foo-thm4')
onto the end of the documentation for @('foo').</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . DEFSECTION) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Fancy @('(encapsulate nil ...)') with a name and @(see xdoc)
support.") (:LONG . "<p>The main reasons to use @('defsection') instead of @('(encapsulate
nil ...)')</p>

<ul>
 <li>It is easier to identify in the @(':pbt') history,</li>
 <li>It indents more nicely than @('encapsulate') in a vanilla emacs,</li>
 <li>It settles the question of where to put the @(see defxdoc) command, and</li>
 <li>It can automatically add the definitions/theorems you supply into the
     documentation for your section.</li>
</ul>

<p>General form:</p>

@({
 (defsection name
    [:parents   parents]
    [:short     short]
    [:long      long]
    [:autodoc   autodoc]
    [:extension topic]
    ... events ...)
})

<p>Example:</p>

@({
 (defsection foo
   :parents (parent1 parent2 ...)
   :short \"@(call foo) is like @(see bar), but better when...\"
   :long \"<p>The main differences between @('foo') and @('bar') are ...</p>\"

   (defund foo (x) ...)
   (local (in-theory (enable foo)))
   (defthm foo-thm1 ...)
   (defthm foo-thm2 ...))
})

<box><p>Note: this example might be better written as a @(see cutil::define),
which is much like a @('defsection') but has additional features.</p></box>


<h3>Ordinary Sections</h3>

<p>The @(':parents'), @(':short'), and @(':long') keywords are optional.  If
any of these keywords are provided, they will be used to introduce a @(see
defxdoc) command; otherwise no documentation will be generated.</p>

<p>By default, the @(':long') string you give will be automatically extended
with a \"Definitions and Theorems\" part that lists all the (non-local)
definitions and theorems introduced in the section.  This makes it easy to keep
the documentation up-to-date as you add and remove theorems to the section.  In
the above example, the @(':long') field would be extended with:</p>

@({
 <h3>Definition and Theorems</h3>
 @(def foo)
 @(thm foo-thm1)
 @(thm foo-thm2)
})

<p>If you do not want this automatic documentation, you can turn it off with
@(':autodoc nil').</p>


<h3>Extended Sections</h3>

<p>The @(':extension') keyword allows you to say that this section is a
continuation of a previously introduced concept.  When @(':extension topic') is
provided, then @('topic') must be the name of a previously documented @(see
xdoc) section, and you are not allowed to use @(':parents') or @(':short')
since the topic already exists.</p>

<p>The main purpose of an @(':extension') section is to add additional
documentation, either via the @(':long') string or via the automatic
documentation generation features of @('defsection').  The documentation
obtained this way is just appended onto the existing @(':long') for the
topic.</p>

<p>For example, if we have already given the section @('foo') with basic
theorems, above we now want to add a bunch of additional \"advanced\" theorems
about it, we might write something like this:</p>

@({
 (defsection advanced-theorems-about-foo
   :extension foo
   (defthm foo-thm3 ...)
   (defthm foo-thm4 ...))
})

<p>This will then append the definitions of @('foo-thm3') and @('foo-thm4')
onto the end of the documentation for @('foo').</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC DEFSECTION)))))) (15 RECORD-EXPANSION (DEFXDOC DEFSECTION-PROGN :SHORT "Fancy @('(progn ...)') with a name and @(see xdoc) support." :LONG "<p>The @('defsection-progn') macro is like @(see defsection) except
that it generates @({(progn ...)}) instead of an @({(encapsulate nil ...)})</p>

<p>This has a number of consequences, mostly having to do with the scope of
@('local') events within the section.  In short, a @('defsection-progn') does
not introduce a new local scope, but a @('defsection') does.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . DEFSECTION-PROGN) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Fancy @('(progn ...)') with a name and @(see xdoc) support.") (:LONG . "<p>The @('defsection-progn') macro is like @(see defsection) except
that it generates @({(progn ...)}) instead of an @({(encapsulate nil ...)})</p>

<p>This has a number of consequences, mostly having to do with the scope of
@('local') events within the section.  In short, a @('defsection-progn') does
not introduce a new local scope, but a @('defsection') does.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC DEFSECTION-PROGN)))))) (16 RECORD-EXPANSION (DEFXDOC UNDOCUMENTED :SHORT "Placeholder for undocumented topics.") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . UNDOCUMENTED) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Placeholder for undocumented topics.") (:LONG) (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC UNDOCUMENTED)))))) (17 RECORD-EXPANSION (DEFXDOC XDOC::TEST-OF-ENTITIES :SHORT "Placeholder topic for testing out HTML entity support in XDOC." :LONG "<p>Here are the entities that XDOC allows:</p>

<p>Normal XML entities:</p>
<ul>
<li>@('&amp;')   becomes &amp;</li>
<li>@('&lt;')    becomes &lt;</li>
<li>@('&gt;')    becomes &gt;</li>
<li>@('&quot;')  becomes &quot;</li>
<li>@('&apos;')  becomes &apos;</li>
</ul>

<p>Additional entities allowed by XDOC:</p>
<ul>
<li>@('&nbsp;')  becomes &nbsp; (this one can be hard to see)</li>
<li>@('&mdash;') becomes &mdash;</li>
<li>@('&rarr;')  becomes &rarr;</li>
</ul>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . XDOC::TEST-OF-ENTITIES) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Placeholder topic for testing out HTML entity support in XDOC.") (:LONG . "<p>Here are the entities that XDOC allows:</p>

<p>Normal XML entities:</p>
<ul>
<li>@('&amp;')   becomes &amp;</li>
<li>@('&lt;')    becomes &lt;</li>
<li>@('&gt;')    becomes &gt;</li>
<li>@('&quot;')  becomes &quot;</li>
<li>@('&apos;')  becomes &apos;</li>
</ul>

<p>Additional entities allowed by XDOC:</p>
<ul>
<li>@('&nbsp;')  becomes &nbsp; (this one can be hard to see)</li>
<li>@('&mdash;') becomes &mdash;</li>
<li>@('&rarr;')  becomes &rarr;</li>
</ul>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC XDOC::TEST-OF-ENTITIES)))))) (18 RECORD-EXPANSION (DEFXDOC SET-DEFAULT-PARENTS :SHORT "Set up default parents to use for @(see xdoc)." :LONG "<p>When documenting a book of inter-related functions, you may
sometimes wish to use the same @(':parents') across many @(see defxdoc) or
@(see defsection) commands.  This can sometimes get tedious.</p>

<p>The macro @(call set-default-parents) can be used to set up a default list
of parent topics to be automatically used by commands such as @(see defxdoc)
and @(see defsection).</p>

<p>Basic Example:</p>

@({
   (local (set-default-parents fox-p))

   (defxdoc make-fox           ;; use default :parents, (fox-p)
     :short ...
     :long ...)

   (defsection feed-fox        ;; use default :parents, (fox-p)
     :short ...
     :long ...)

   (defsection chase-mouse     ;; use explicit :parents, (fox-p mouse-p)
     :parents (fox-p mouse-p)
     :short ...
     :long ...)

   (local (set-default-parents fox-p hawk-p))

   (defsection bother-hawk     ;; use default :parents, (fox-p hawk-p)
     :short ...
     :long ...)

   (local (set-default-parents nil))

   (defxdoc zebra-p            ;; use default :parents, nil
     :short ...
     :long ...)
})

<p>Note that @('set-default-parents') is just a macro that expands to a @(see
table) event.  It's good practice to only <b>locally</b> set the default
parents&mdash;otherwise the default parents can \"leak\" from your book and
lead you to inadvertently set the parents of other, unrelated topics.</p>") (WITH-OUTPUT :OFF (EVENT SUMMARY) (PROGN (TABLE XDOC (QUOTE DOC) (CONS (QUOTE ((:NAME . SET-DEFAULT-PARENTS) (:BASE-PKG . XDOC::ACL2-PKG-WITNESS) (:PARENTS XDOC) (:SHORT . "Set up default parents to use for @(see xdoc).") (:LONG . "<p>When documenting a book of inter-related functions, you may
sometimes wish to use the same @(':parents') across many @(see defxdoc) or
@(see defsection) commands.  This can sometimes get tedious.</p>

<p>The macro @(call set-default-parents) can be used to set up a default list
of parent topics to be automatically used by commands such as @(see defxdoc)
and @(see defsection).</p>

<p>Basic Example:</p>

@({
   (local (set-default-parents fox-p))

   (defxdoc make-fox           ;; use default :parents, (fox-p)
     :short ...
     :long ...)

   (defsection feed-fox        ;; use default :parents, (fox-p)
     :short ...
     :long ...)

   (defsection chase-mouse     ;; use explicit :parents, (fox-p mouse-p)
     :parents (fox-p mouse-p)
     :short ...
     :long ...)

   (local (set-default-parents fox-p hawk-p))

   (defsection bother-hawk     ;; use default :parents, (fox-p hawk-p)
     :short ...
     :long ...)

   (local (set-default-parents nil))

   (defxdoc zebra-p            ;; use default :parents, nil
     :short ...
     :long ...)
})

<p>Note that @('set-default-parents') is just a macro that expands to a @(see
table) event.  It's good practice to only <b>locally</b> set the default
parents&mdash;otherwise the default parents can \"leak\" from your book and
lead you to inadvertently set the parents of other, unrelated topics.</p>") (:FROM . "[books]/xdoc/topics.lisp"))) (XDOC::GET-XDOC-TABLE WORLD))) (VALUE-TRIPLE (QUOTE (DEFXDOC SET-DEFAULT-PARENTS)))))))
(("/usr/share/acl2-6.3/books/centaur/bridge/portcullis.lisp" "centaur/bridge/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 661758845) ("/usr/share/acl2-6.3/books/oslib/portcullis.lisp" "oslib/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 197838065) ("/usr/share/acl2-6.3/books/std/osets/portcullis.lisp" "std/osets/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1689687557) ("/usr/share/acl2-6.3/books/xdoc/portcullis.lisp" "xdoc/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1473208573) ("/usr/share/acl2-6.3/books/str/portcullis.lisp" "str/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 2077071243))
(("/usr/share/acl2-6.3/books/xdoc/topics.lisp" "topics" "topics" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 912747616) ("/usr/share/acl2-6.3/books/xdoc/import-acl2doc.lisp" "import-acl2doc" "import-acl2doc" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1928793510) ("/usr/share/acl2-6.3/books/tools/bstar.lisp" "tools/bstar" "bstar" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1482974359) ("/usr/share/acl2-6.3/books/tools/pack.lisp" "pack" "pack" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1797170439) ("/usr/share/acl2-6.3/books/system/origin.lisp" "system/origin" "origin" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1321433970) ("/usr/share/acl2-6.3/books/xdoc/top.lisp" "xdoc/top" "top" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1214825095) ("/usr/share/acl2-6.3/books/xdoc/book-thms.lisp" "book-thms" "book-thms" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1105796063) ("/usr/share/acl2-6.3/books/xdoc/base.lisp" "base" "base" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 454271148) ("/usr/share/acl2-6.3/books/xdoc/portcullis.lisp" "portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1473208573) ("/usr/share/acl2-6.3/books/xdoc/write-acl2-xdoc.lisp" "write-acl2-xdoc" "write-acl2-xdoc" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 962390655) ("/usr/share/acl2-6.3/books/centaur/bridge/portcullis.lisp" "centaur/bridge/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 661758845) ("/usr/share/acl2-6.3/books/oslib/portcullis.lisp" "oslib/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 197838065) ("/usr/share/acl2-6.3/books/std/osets/portcullis.lisp" "std/osets/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1689687557) ("/usr/share/acl2-6.3/books/xdoc/portcullis.lisp" "xdoc/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 1473208573) ("/usr/share/acl2-6.3/books/str/portcullis.lisp" "str/portcullis" "portcullis" ((:SKIPPED-PROOFSP) (:AXIOMSP) (:TTAGS)) . 2077071243))
2132316512