/usr/include/linux/raid/md_p.h is in linux-libc-dev 3.13.0-24.46.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 | /*
md_p.h : physical layout of Linux RAID devices
Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
You should have received a copy of the GNU General Public License
(for example /usr/src/linux/COPYING); if not, write to the Free
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _MD_P_H
#define _MD_P_H
#include <linux/types.h>
#include <asm/byteorder.h>
/*
* RAID superblock.
*
* The RAID superblock maintains some statistics on each RAID configuration.
* Each real device in the RAID set contains it near the end of the device.
* Some of the ideas are copied from the ext2fs implementation.
*
* We currently use 4096 bytes as follows:
*
* word offset function
*
* 0 - 31 Constant generic RAID device information.
* 32 - 63 Generic state information.
* 64 - 127 Personality specific information.
* 128 - 511 12 32-words descriptors of the disks in the raid set.
* 512 - 911 Reserved.
* 912 - 1023 Disk specific descriptor.
*/
/*
* If x is the real device size in bytes, we return an apparent size of:
*
* y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES
*
* and place the 4kB superblock at offset y.
*/
#define MD_RESERVED_BYTES (64 * 1024)
#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512)
#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)
#define MD_SB_BYTES 4096
#define MD_SB_WORDS (MD_SB_BYTES / 4)
#define MD_SB_SECTORS (MD_SB_BYTES / 512)
/*
* The following are counted in 32-bit words
*/
#define MD_SB_GENERIC_OFFSET 0
#define MD_SB_PERSONALITY_OFFSET 64
#define MD_SB_DISKS_OFFSET 128
#define MD_SB_DESCRIPTOR_OFFSET 992
#define MD_SB_GENERIC_CONSTANT_WORDS 32
#define MD_SB_GENERIC_STATE_WORDS 32
#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS)
#define MD_SB_PERSONALITY_WORDS 64
#define MD_SB_DESCRIPTOR_WORDS 32
#define MD_SB_DISKS 27
#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS)
#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS)
#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS)
/*
* Device "operational" state bits
*/
#define MD_DISK_FAULTY 0 /* disk is faulty / operational */
#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */
#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */
#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */
#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config.
* read requests will only be sent here in
* dire need
*/
typedef struct mdp_device_descriptor_s {
__u32 number; /* 0 Device number in the entire set */
__u32 major; /* 1 Device major number */
__u32 minor; /* 2 Device minor number */
__u32 raid_disk; /* 3 The role of the device in the raid set */
__u32 state; /* 4 Operational state */
__u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5];
} mdp_disk_t;
#define MD_SB_MAGIC 0xa92b4efc
/*
* Superblock state bits
*/
#define MD_SB_CLEAN 0
#define MD_SB_ERRORS 1
#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */
/*
* Notes:
* - if an array is being reshaped (restriped) in order to change the
* the number of active devices in the array, 'raid_disks' will be
* the larger of the old and new numbers. 'delta_disks' will
* be the "new - old". So if +ve, raid_disks is the new value, and
* "raid_disks-delta_disks" is the old. If -ve, raid_disks is the
* old value and "raid_disks+delta_disks" is the new (smaller) value.
*/
typedef struct mdp_superblock_s {
/*
* Constant generic information
*/
__u32 md_magic; /* 0 MD identifier */
__u32 major_version; /* 1 major version to which the set conforms */
__u32 minor_version; /* 2 minor version ... */
__u32 patch_version; /* 3 patchlevel version ... */
__u32 gvalid_words; /* 4 Number of used words in this section */
__u32 set_uuid0; /* 5 Raid set identifier */
__u32 ctime; /* 6 Creation time */
__u32 level; /* 7 Raid personality */
__u32 size; /* 8 Apparent size of each individual disk */
__u32 nr_disks; /* 9 total disks in the raid set */
__u32 raid_disks; /* 10 disks in a fully functional raid set */
__u32 md_minor; /* 11 preferred MD minor device number */
__u32 not_persistent; /* 12 does it have a persistent superblock */
__u32 set_uuid1; /* 13 Raid set identifier #2 */
__u32 set_uuid2; /* 14 Raid set identifier #3 */
__u32 set_uuid3; /* 15 Raid set identifier #4 */
__u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16];
/*
* Generic state information
*/
__u32 utime; /* 0 Superblock update time */
__u32 state; /* 1 State bits (clean, ...) */
__u32 active_disks; /* 2 Number of currently active disks */
__u32 working_disks; /* 3 Number of working disks */
__u32 failed_disks; /* 4 Number of failed disks */
__u32 spare_disks; /* 5 Number of spare disks */
__u32 sb_csum; /* 6 checksum of the whole superblock */
#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
__u32 events_hi; /* 7 high-order of superblock update count */
__u32 events_lo; /* 8 low-order of superblock update count */
__u32 cp_events_hi; /* 9 high-order of checkpoint update count */
__u32 cp_events_lo; /* 10 low-order of checkpoint update count */
#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
__u32 events_lo; /* 7 low-order of superblock update count */
__u32 events_hi; /* 8 high-order of superblock update count */
__u32 cp_events_lo; /* 9 low-order of checkpoint update count */
__u32 cp_events_hi; /* 10 high-order of checkpoint update count */
#else
#error unspecified endianness
#endif
__u32 recovery_cp; /* 11 recovery checkpoint sector count */
/* There are only valid for minor_version > 90 */
__u64 reshape_position; /* 12,13 next address in array-space for reshape */
__u32 new_level; /* 14 new level we are reshaping to */
__u32 delta_disks; /* 15 change in number of raid_disks */
__u32 new_layout; /* 16 new layout */
__u32 new_chunk; /* 17 new chunk size (bytes) */
__u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18];
/*
* Personality information
*/
__u32 layout; /* 0 the array's physical layout */
__u32 chunk_size; /* 1 chunk size in bytes */
__u32 root_pv; /* 2 LV root PV */
__u32 root_block; /* 3 LV root block */
__u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4];
/*
* Disks information
*/
mdp_disk_t disks[MD_SB_DISKS];
/*
* Reserved
*/
__u32 reserved[MD_SB_RESERVED_WORDS];
/*
* Active descriptor
*/
mdp_disk_t this_disk;
} mdp_super_t;
static __inline__ __u64 md_event(mdp_super_t *sb) {
__u64 ev = sb->events_hi;
return (ev<<32)| sb->events_lo;
}
#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1)
/*
* The version-1 superblock :
* All numeric fields are little-endian.
*
* total size: 256 bytes plus 2 per device.
* 1K allows 384 devices.
*/
struct mdp_superblock_1 {
/* constant array information - 128 bytes */
__le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */
__le32 major_version; /* 1 */
__le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */
__le32 pad0; /* always set to 0 when writing */
__u8 set_uuid[16]; /* user-space generated. */
char set_name[32]; /* set and interpreted by user-space */
__le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/
__le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */
__le32 layout; /* only for raid5 and raid10 currently */
__le64 size; /* used size of component devices, in 512byte sectors */
__le32 chunksize; /* in 512byte sectors */
__le32 raid_disks;
__le32 bitmap_offset; /* sectors after start of superblock that bitmap starts
* NOTE: signed, so bitmap can be before superblock
* only meaningful of feature_map[0] is set.
*/
/* These are only valid with feature bit '4' */
__le32 new_level; /* new level we are reshaping to */
__le64 reshape_position; /* next address in array-space for reshape */
__le32 delta_disks; /* change in number of raid_disks */
__le32 new_layout; /* new layout */
__le32 new_chunk; /* new chunk size (512byte sectors) */
__le32 new_offset; /* signed number to add to data_offset in new
* layout. 0 == no-change. This can be
* different on each device in the array.
*/
/* constant this-device information - 64 bytes */
__le64 data_offset; /* sector start of data, often 0 */
__le64 data_size; /* sectors in this device that can be used for data */
__le64 super_offset; /* sector start of this superblock */
__le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */
__le32 dev_number; /* permanent identifier of this device - not role in raid */
__le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */
__u8 device_uuid[16]; /* user-space setable, ignored by kernel */
__u8 devflags; /* per-device flags. Only one defined...*/
#define WriteMostly1 1 /* mask for writemostly flag in above */
/* Bad block log. If there are any bad blocks the feature flag is set.
* If offset and size are non-zero, that space is reserved and available
*/
__u8 bblog_shift; /* shift from sectors to block size */
__le16 bblog_size; /* number of sectors reserved for list */
__le32 bblog_offset; /* sector offset from superblock to bblog,
* signed - not unsigned */
/* array state information - 64 bytes */
__le64 utime; /* 40 bits second, 24 bits microseconds */
__le64 events; /* incremented when superblock updated */
__le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */
__le32 sb_csum; /* checksum up to devs[max_dev] */
__le32 max_dev; /* size of devs[] array to consider */
__u8 pad3[64-32]; /* set to 0 when writing */
/* device state information. Indexed by dev_number.
* 2 bytes per device
* Note there are no per-device state flags. State information is rolled
* into the 'roles' value. If a device is spare or faulty, then it doesn't
* have a meaningful role.
*/
__le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */
};
/* feature_map bits */
#define MD_FEATURE_BITMAP_OFFSET 1
#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and
* must be honoured
*/
#define MD_FEATURE_RESHAPE_ACTIVE 4
#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */
#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an
* active device with same 'role'.
* 'recovery_offset' is also set.
*/
#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number
* of devices, but is going
* backwards anyway.
*/
#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */
#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \
|MD_FEATURE_RECOVERY_OFFSET \
|MD_FEATURE_RESHAPE_ACTIVE \
|MD_FEATURE_BAD_BLOCKS \
|MD_FEATURE_REPLACEMENT \
|MD_FEATURE_RESHAPE_BACKWARDS \
|MD_FEATURE_NEW_OFFSET \
)
#endif
|