libboost1.54-tools-dev 1.54.0-4ubuntu3 / usr / share / boost-build / tools / msvc.jam

# Copyright (c) 2003 David Abrahams
# Copyright (c) 2005 Vladimir Prus
# Copyright (c) 2005 Alexey Pakhunov
# Copyright (c) 2006 Bojan Resnik
# Copyright (c) 2006 Ilya Sokolov
# Copyright (c) 2007 Rene Rivera
# Copyright (c) 2008 Jurko Gospodnetic
#
# Distributed under the Boost Software License, Version 1.0.
# (See accompanying file LICENSE_1_0.txt or copy at
# http://www.boost.org/LICENSE_1_0.txt)

################################################################################
#
# MSVC Boost Build toolset module.
# --------------------------------
#
# All toolset versions need to have their location either auto-detected or
# explicitly specified except for the special 'default' version that expects the
# environment to find the needed tools or report an error.
#
################################################################################

import "class" : new ;
import common ;
import feature ;
import generators ;
import mc ;
import midl ;
import os ;
import path ;
import pch ;
import property ;
import rc ;
import toolset ;
import type ;


type.register MANIFEST : manifest ;
feature.feature embed-manifest : on off : incidental propagated ;

type.register PDB : pdb ;


################################################################################
#
# Public rules.
#
################################################################################

# Initialize a specific toolset version configuration. As the result, path to
# compiler and, possible, program names are set up, and will be used when that
# version of compiler is requested. For example, you might have:
#
#    using msvc : 6.5 : cl.exe ;
#    using msvc : 7.0 : Y:/foo/bar/cl.exe ;
#
# The version parameter may be ommited:
#
#    using msvc : : Z:/foo/bar/cl.exe ;
#
# The following keywords have special meanings when specified as versions:
#   - all     - all detected but not yet used versions will be marked as used
#               with their default options.
#   - default - this is an equivalent to an empty version.
#
# Depending on a supplied version, detected configurations and presence 'cl.exe'
# in the path different results may be achieved. The following table describes
# the possible scenarios:
#
#                                      Nothing            "x.y"
# Passed   Nothing       "x.y"         detected,          detected,
# version  detected      detected      cl.exe in path     cl.exe in path
#
# default  Error         Use "x.y"     Create "default"   Use "x.y"
# all      None          Use all       None               Use all
# x.y      -             Use "x.y"     -                  Use "x.y"
# a.b      Error         Error         Create "a.b"       Create "a.b"
#
# "x.y" - refers to a detected version;
# "a.b" - refers to an undetected version.
#
# FIXME: Currently the command parameter and the <compiler> property parameter
# seem to overlap in duties. Remove this duplication. This seems to be related
# to why someone started preparing to replace init with configure rules.
#
rule init (
    # The msvc version being configured. When omitted the tools invoked when no
    # explicit version is given will be configured.
    version ?

    # The command used to invoke the compiler. If not specified:
    #   - if version is given, default location for that version will be
    #     searched
    #
    #   - if version is not given, default locations for MSVC 9.0, 8.0, 7.1, 7.0
    #     and 6.* will be searched
    #
    #   - if compiler is not found in the default locations, PATH will be
    #     searched.
    : command *

    # Options may include:
    #
    #     All options shared by multiple toolset types as handled by the
    #   common.handle-options() rule, e.g. <cflags>, <compileflags>, <cxxflags>,
    #   <fflags> & <linkflags>.
    #
    #   <assembler>
    #   <compiler>
    #   <idl-compiler>
    #   <linker>
    #   <mc-compiler>
    #   <resource-compiler>
    #       Exact tool names to be used by this msvc toolset configuration.
    #
    #   <compiler-filter>
    #       Command through which to pipe the output of running the compiler.
    #     For example to pass the output to STLfilt.
    #
    #   <setup>
    #       Global setup command to invoke before running any of the msvc tools.
    #     It will be passed additional option parameters depending on the actual
    #     target platform.
    #
    #   <setup-amd64>
    #   <setup-i386>
    #   <setup-ia64>
    #   <setup-arm>
    #       Platform specific setup command to invoke before running any of the
    #     msvc tools used when builing a target for a specific platform, e.g.
    #     when building a 32 or 64 bit executable.
    : options *
)
{
    if $(command)
    {
        options += <command>$(command) ;
    }
    configure $(version) : $(options) ;
}


# 'configure' is a newer version of 'init'. The parameter 'command' is passed as
# a part of the 'options' list. See the 'init' rule comment for more detailed
# information.
#
rule configure ( version ? : options * )
{
    switch $(version)
    {
        case "all" :
            if $(options)
            {
                import errors ;
                errors.error "MSVC toolset configuration: options should be"
                    "empty when '$(version)' is specified." ;
            }

            # Configure (i.e. mark as used) all registered versions.
            local all-versions = [ $(.versions).all ] ;
            if ! $(all-versions)
            {
                if $(.debug-configuration)
                {
                    ECHO "notice: [msvc-cfg] Asked to configure all registered"
                        "msvc toolset versions when there are none currently"
                        "registered." ;
                }
            }
            else
            {
                for local v in $(all-versions)
                {
                    # Note that there is no need to skip already configured
                    # versions here as this will request configure-really rule
                    # to configure the version using default options which will
                    # in turn cause it to simply do nothing in case the version
                    # has already been configured.
                    configure-really $(v) ;
                }
            }

        case "default" :
            configure-really : $(options) ;

        case * :
            configure-really $(version) : $(options) ;
    }
}


# Sets up flag definitions dependent on the compiler version used.
# - 'version' is the version of compiler in N.M format.
# - 'conditions' is the property set to be used as flag conditions.
# - 'toolset' is the toolset for which flag settings are to be defined.
#   This makes the rule reusable for other msvc-option-compatible compilers.
#
rule configure-version-specific ( toolset : version : conditions )
{
    toolset.push-checking-for-flags-module unchecked ;
    # Starting with versions 7.0, the msvc compiler have the /Zc:forScope and
    # /Zc:wchar_t options that improve C++ standard conformance, but those
    # options are off by default. If we are sure that the msvc version is at
    # 7.*, add those options explicitly. We can be sure either if user specified
    # version 7.* explicitly or if we auto-detected the version ourselves.
    if ! [ MATCH ^(6\\.) : $(version) ]
    {
        toolset.flags $(toolset).compile CFLAGS $(conditions) : /Zc:forScope /Zc:wchar_t ;
        toolset.flags $(toolset).compile.c++ C++FLAGS $(conditions) : /wd4675 ;

        # Explicitly disable the 'function is deprecated' warning. Some msvc
        # versions have a bug, causing them to emit the deprecation warning even
        # with /W0.
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<warnings>off : /wd4996 ;

        if [ MATCH ^([78]\\.) : $(version) ]
        {
            # 64-bit compatibility warning deprecated since 9.0, see
            # http://msdn.microsoft.com/en-us/library/yt4xw8fh.aspx
            toolset.flags $(toolset).compile CFLAGS $(conditions)/<warnings>all : /Wp64 ;
        }
    }

    #
    # Processor-specific optimization.
    #

    if [ MATCH ^([67]) : $(version) ]
    {
        # 8.0 deprecates some of the options.
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<optimization>speed $(conditions)/<optimization>space : /Ogiy /Gs ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<optimization>speed : /Ot ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<optimization>space : /Os ;

        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-i386)/<instruction-set> : /GB ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-i386)/<instruction-set>i486 : /G4 ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-i386)/<instruction-set>$(.cpu-type-g5) : /G5 ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-i386)/<instruction-set>$(.cpu-type-g6) : /G6 ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-i386)/<instruction-set>$(.cpu-type-g7) : /G7 ;

        # Improve floating-point accuracy. Otherwise, some of C++ Boost's "math"
        # tests will fail.
        toolset.flags $(toolset).compile CFLAGS $(conditions) : /Op ;

        # 7.1 and below have single-threaded static RTL.
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<runtime-debugging>off/<runtime-link>static/<threading>single : /ML ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<runtime-debugging>on/<runtime-link>static/<threading>single : /MLd ;
    }
    else
    {
        # 8.0 and above adds some more options.
        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-amd64)/<instruction-set> : /favor:blend ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-amd64)/<instruction-set>$(.cpu-type-em64t) : /favor:EM64T ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/$(.cpu-arch-amd64)/<instruction-set>$(.cpu-type-amd64) : /favor:AMD64 ;

        # 8.0 and above only has multi-threaded static RTL.
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<runtime-debugging>off/<runtime-link>static/<threading>single : /MT ;
        toolset.flags $(toolset).compile CFLAGS $(conditions)/<runtime-debugging>on/<runtime-link>static/<threading>single : /MTd ;

        # Specify target machine type so the linker will not need to guess.
        toolset.flags $(toolset).link LINKFLAGS $(conditions)/$(.cpu-arch-amd64) : /MACHINE:X64 ;
        toolset.flags $(toolset).link LINKFLAGS $(conditions)/$(.cpu-arch-i386)  : /MACHINE:X86 ;
        toolset.flags $(toolset).link LINKFLAGS $(conditions)/$(.cpu-arch-ia64)  : /MACHINE:IA64 ;
        toolset.flags $(toolset).link LINKFLAGS $(conditions)/$(.cpu-arch-arm)   : /MACHINE:ARM ;

        # Make sure that manifest will be generated even if there is no
        # dependencies to put there.
        toolset.flags $(toolset).link LINKFLAGS $(conditions) : /MANIFEST ;
    }
    toolset.pop-checking-for-flags-module ;
}


# Registers this toolset including all of its flags, features & generators. Does
# nothing on repeated calls.
#
rule register-toolset ( )
{
    if ! msvc in [ feature.values toolset ]
    {
        register-toolset-really ;
    }
}


# Declare action for creating static libraries. If library exists, remove it
# before adding files. See
# http://article.gmane.org/gmane.comp.lib.boost.build/4241 for rationale.
if [ os.name ] in NT
{
    # The 'DEL' command would issue a message to stdout if the file does not
    # exist, so need a check.
    actions archive
    {
        if exist "$(<[1])" DEL "$(<[1])"
        $(.LD) $(AROPTIONS) /out:"$(<[1])" @"@($(<[1]:W).rsp:E=$(.nl)"$(>)" $(.nl)$(LIBRARIES_MENTIONED_BY_FILE) $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST).lib" $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA).lib")"
    }
}
else
{
    actions archive
    {
        $(.RM) "$(<[1])"
        $(.LD) $(AROPTIONS) /out:"$(<[1])" @"@($(<[1]:W).rsp:E=$(.nl)"$(>)" $(.nl)$(LIBRARIES_MENTIONED_BY_FILE) $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST).lib" $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA).lib")"
    }
}


# For the assembler the following options are turned on by default:
#
#   -Zp4   align structures to 4 bytes
#   -Cp    preserve case of user identifiers
#   -Cx    preserve case in publics, externs
#
actions compile.asm
{
    $(.ASM) -c -Zp4 -Cp -Cx -D$(DEFINES) $(ASMFLAGS) $(USER_ASMFLAGS) -Fo "$(<:W)" "$(>:W)"
}


rule compile.c ( targets + : sources * : properties * )
{
    C++FLAGS on $(targets[1]) = ;
    get-rspline $(targets) : -TC ;
    compile-c-c++ $(<) : $(>) [ on $(<) return $(PCH_FILE) ] [ on $(<) return $(PCH_HEADER) ] ;
}


rule compile.c.preprocess ( targets + : sources * : properties * )
{
    C++FLAGS on $(targets[1]) = ;
    get-rspline $(targets) : -TC ;
    preprocess-c-c++ $(<) : $(>) [ on $(<) return $(PCH_FILE) ] [ on $(<) return $(PCH_HEADER) ] ;
}


rule compile.c.pch ( targets + : sources * : properties * )
{
    C++FLAGS on $(targets[1]) = ;
    get-rspline $(targets[1]) : -TC ;
    get-rspline $(targets[2]) : -TC ;
    local pch-source = [ on $(<) return $(PCH_SOURCE) ] ;
    if $(pch-source)
    {
        DEPENDS $(<) : $(pch-source) ;
        compile-c-c++-pch-s $(targets) : $(sources) $(pch-source) ;
    }
    else
    {
        compile-c-c++-pch $(targets) : $(sources) ;
    }
}

toolset.flags msvc YLOPTION : "-Yl" ;

# Action for running the C/C++ compiler without using precompiled headers.
#
# WARNING: Synchronize any changes this in action with intel-win
#
# Notes regarding PDB generation, for when we use
# <debug-symbols>on/<debug-store>database:
#
# 1. PDB_CFLAG is only set for <debug-symbols>on/<debug-store>database, ensuring
#    that the /Fd flag is dropped if PDB_CFLAG is empty.
#
# 2. When compiling executables's source files, PDB_NAME is set on a per-source
#    file basis by rule compile-c-c++. The linker will pull these into the
#    executable's PDB.
#
# 3. When compiling library's source files, PDB_NAME is updated to <libname>.pdb
#    for each source file by rule archive, as in this case compiler must be used
#    to create a single PDB for our library.
#
actions compile-c-c++ bind PDB_NAME
{
    $(.CC) @"@($(<[1]:W).rsp:E="$(>[1]:W)" -Fo"$(<[1]:W)" $(PDB_CFLAG)"$(PDB_NAME)" -Yu"$(>[3]:D=)" -Fp"$(>[2]:W)" $(CC_RSPLINE))" $(.CC.FILTER)
}

actions preprocess-c-c++ bind PDB_NAME
{
    $(.CC) @"@($(<[1]:W).rsp:E="$(>[1]:W)" -E $(PDB_CFLAG)"$(PDB_NAME)" -Yu"$(>[3]:D=)" -Fp"$(>[2]:W)" $(CC_RSPLINE))" >"$(<[1]:W)"
}

rule compile-c-c++ ( targets + : sources * )
{
    DEPENDS $(<[1]) : [ on $(<[1]) return $(PCH_HEADER) ] ;
    DEPENDS $(<[1]) : [ on $(<[1]) return $(PCH_FILE) ] ;
    PDB_NAME on $(<) = $(<[1]:S=.pdb) ;
    LOCATE on $(<[1]:S=.pdb) = [ on $(<[1]) return $(LOCATE) ] ;
}

rule preprocess-c-c++ ( targets + : sources * )
{
    DEPENDS $(<[1]) : [ on $(<[1]) return $(PCH_HEADER) ] ;
    DEPENDS $(<[1]) : [ on $(<[1]) return $(PCH_FILE) ] ;
    PDB_NAME on $(<) = $(<:S=.pdb) ;
    LOCATE on $(<[1]:S=.pdb) = [ on $(<[1]) return $(LOCATE) ] ;
}

# Action for running the C/C++ compiler using precompiled headers. In addition
# to whatever else it needs to compile, this action also adds a temporary source
# .cpp file used to compile the precompiled headers themselves.
#
# The global .escaped-double-quote variable is used to avoid messing up Emacs
# syntax highlighting in the messy N-quoted code below.
actions compile-c-c++-pch
{
    $(.CC) @"@($(<[1]:W).rsp:E="$(>[2]:W)" -Fo"$(<[2]:W)" -Yc"$(>[1]:D=)" $(YLOPTION)"__bjam_pch_symbol_$(>[1]:D=)" -Fp"$(<[1]:W)" $(CC_RSPLINE))" "@($(<[1]:W).cpp:E=#include $(.escaped-double-quote)$(>[1]:D=)$(.escaped-double-quote)$(.nl))" $(.CC.FILTER)
}


# Action for running the C/C++ compiler using precompiled headers. An already
# built source file for compiling the precompiled headers is expected to be
# given as one of the source parameters.
actions compile-c-c++-pch-s
{
    $(.CC) @"@($(<[1]:W).rsp:E="$(>[2]:W)" -Fo"$(<[2]:W)" -Yc"$(>[1]:D=)" $(YLOPTION)"__bjam_pch_symbol_$(>[1]:D=)" -Fp"$(<[1]:W)" $(CC_RSPLINE))" $(.CC.FILTER)
}


rule compile.c++ ( targets + : sources * : properties * )
{
    get-rspline $(targets) : -TP ;
    compile-c-c++ $(<) : $(>) [ on $(<) return $(PCH_FILE) ] [ on $(<) return $(PCH_HEADER) ] ;
}

rule compile.c++.preprocess ( targets + : sources * : properties * )
{
    get-rspline $(targets) : -TP ;
    preprocess-c-c++ $(<) : $(>) [ on $(<) return $(PCH_FILE) ] [ on $(<) return $(PCH_HEADER) ] ;
}


rule compile.c++.pch ( targets + : sources * : properties * )
{
    get-rspline $(targets[1]) : -TP ;
    get-rspline $(targets[2]) : -TP ;
    local pch-source = [ on $(<) return $(PCH_SOURCE) ] ;
    if $(pch-source)
    {
        DEPENDS $(<) : $(pch-source) ;
        compile-c-c++-pch-s $(targets) : $(sources) $(pch-source) ;
    }
    else
    {
        compile-c-c++-pch $(targets) : $(sources) ;
    }
}


# See midl.jam for details.
#
actions compile.idl
{
    $(.IDL) /nologo @"@($(<[1]:W).rsp:E=$(.nl)"$(>:W)" $(.nl)-D$(DEFINES) $(.nl)"-I$(INCLUDES:W)" $(.nl)-U$(UNDEFS) $(.nl)$(MIDLFLAGS) $(.nl)/tlb "$(<[1]:W)" $(.nl)/h "$(<[2]:W)" $(.nl)/iid "$(<[3]:W)" $(.nl)/proxy "$(<[4]:W)" $(.nl)/dlldata "$(<[5]:W)")"
    $(.TOUCH_FILE) "$(<[4]:W)"
    $(.TOUCH_FILE) "$(<[5]:W)"
}


actions compile.mc
{
    $(.MC) $(MCFLAGS) -h "$(<[1]:DW)" -r "$(<[2]:DW)" "$(>:W)"
}


actions compile.rc
{
    $(.RC) -l 0x409 -U$(UNDEFS) -D$(DEFINES) -I"$(INCLUDES:W)" -fo "$(<:W)" "$(>:W)"
}


rule link ( targets + : sources * : properties * )
{
    if <embed-manifest>on in $(properties)
    {
        msvc.manifest $(targets) : $(sources) : $(properties) ;
    }
}

rule link.dll ( targets + : sources * : properties * )
{
    DEPENDS $(<) : [ on $(<) return $(DEF_FILE) ] ;
    if <embed-manifest>on in $(properties)
    {
        msvc.manifest.dll $(targets) : $(sources) : $(properties) ;
    }
}

# Incremental linking a DLL causes no end of problems: if the actual exports do
# not change, the import .lib file is never updated. Therefore, the .lib is
# always out-of-date and gets rebuilt every time. I am not sure that incremental
# linking is such a great idea in general, but in this case I am sure we do not
# want it.

# Windows manifest is a new way to specify dependencies on managed DotNet
# assemblies and Windows native DLLs. The manifests are embedded as resources
# and are useful in any PE target (both DLL and EXE).

if [ os.name ] in NT
{
    actions link bind DEF_FILE LIBRARIES_MENTIONED_BY_FILE
    {
        $(.LD) $(LINKFLAGS) /out:"$(<[1]:W)" /LIBPATH:"$(LINKPATH:W)" $(OPTIONS) @"@($(<[1]:W).rsp:E=$(.nl)"$(>)" $(.nl)$(LIBRARIES_MENTIONED_BY_FILE) $(.nl)$(LIBRARIES) $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST).lib" $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA).lib")"
        if %ERRORLEVEL% NEQ 0 EXIT %ERRORLEVEL%
    }

    actions manifest
    {
        if exist "$(<[1]).manifest" (
            $(.MT) -manifest "$(<[1]).manifest" "-outputresource:$(<[1]);1"
        )
    }

    actions link.dll bind DEF_FILE LIBRARIES_MENTIONED_BY_FILE
    {
        $(.LD) /DLL $(LINKFLAGS) /out:"$(<[1]:W)" /IMPLIB:"$(<[2]:W)" /LIBPATH:"$(LINKPATH:W)" /def:"$(DEF_FILE)" $(OPTIONS) @"@($(<[1]:W).rsp:E=$(.nl)"$(>)" $(.nl)$(LIBRARIES_MENTIONED_BY_FILE) $(.nl)$(LIBRARIES) $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST).lib" $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA).lib")"
        if %ERRORLEVEL% NEQ 0 EXIT %ERRORLEVEL%
    }

    actions manifest.dll
    {
        if exist "$(<[1]).manifest" (
            $(.MT) -manifest "$(<[1]).manifest" "-outputresource:$(<[1]);2"
        )
    }
}
else
{
    actions link bind DEF_FILE LIBRARIES_MENTIONED_BY_FILE
    {
        $(.LD) $(LINKFLAGS) /out:"$(<[1]:W)" /LIBPATH:"$(LINKPATH:W)" $(OPTIONS) @"@($(<[1]:W).rsp:E=$(.nl)"$(>)" $(.nl)$(LIBRARIES_MENTIONED_BY_FILE) $(.nl)$(LIBRARIES) $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST).lib" $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA).lib")"
    }

    actions manifest
    {
        if test -e "$(<[1]).manifest"; then
            $(.MT) -manifest "$(<[1]:W).manifest" "-outputresource:$(<[1]:W);1"
        fi
    }

    actions link.dll bind DEF_FILE LIBRARIES_MENTIONED_BY_FILE
    {
        $(.LD) /DLL $(LINKFLAGS) /out:"$(<[1]:W)" /IMPLIB:"$(<[2]:W)" /LIBPATH:"$(LINKPATH:W)" /def:"$(DEF_FILE)" $(OPTIONS) @"@($(<[1]:W).rsp:E=$(.nl)"$(>)" $(.nl)$(LIBRARIES_MENTIONED_BY_FILE) $(.nl)$(LIBRARIES) $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_ST).lib" $(.nl)"$(LIBRARY_OPTION)$(FINDLIBS_SA).lib")"
    }

    actions manifest.dll
    {
        if test -e "$(<[1]).manifest"; then
            $(.MT) -manifest "$(<[1]:W).manifest" "-outputresource:$(<[1]:W);2"
        fi
    }
}

# This rule sets up the pdb file that will be used when generating static
# libraries and the debug-store option is database, so that the compiler puts
# all the debug info into a single .pdb file named after the library.
#
# Poking at source targets this way is probably not clean, but it is the
# easiest approach.
#
rule archive ( targets + : sources * : properties * )
{
    PDB_NAME on $(>) = $(<[1]:S=.pdb) ;
    LOCATE on $(<[1]:S=.pdb) = [ on $(<[1]) return $(LOCATE) ] ;
}


################################################################################
#
# Classes.
#
################################################################################

class msvc-pch-generator : pch-generator
{
    import property-set ;

    rule run-pch ( project name ? : property-set : sources * )
    {
        # Searching for the header and source file in the sources.
        local pch-header ;
        local pch-source ;
        for local s in $(sources)
        {
            if [ type.is-derived [ $(s).type ] H ]
            {
                pch-header = $(s) ;
            }
            else if
                [ type.is-derived [ $(s).type ] CPP ] ||
                [ type.is-derived [ $(s).type ] C ]
            {
                pch-source = $(s) ;
            }
        }

        if ! $(pch-header)
        {
            import errors : user-error : errors.user-error ;
            errors.user-error "can not build pch without pch-header" ;
        }

        # If we do not have the PCH source - that is fine. We will just create a
        # temporary .cpp file in the action.

        local generated = [ generator.run $(project) $(name)
            : [ property-set.create
                # Passing of <pch-source> is a dirty trick, needed because
                # non-composing generators with multiple inputs are subtly
                # broken. For more detailed information see:
                # https://zigzag.cs.msu.su:7813/boost.build/ticket/111
                <pch-source>$(pch-source)
                [ $(property-set).raw ] ]
            : $(pch-header) ] ;

        local pch-file ;
        for local g in $(generated)
        {
            if [ type.is-derived [ $(g).type ] PCH ]
            {
                pch-file = $(g) ;
            }
        }

        return [ property-set.create <pch-header>$(pch-header)
            <pch-file>$(pch-file) ] $(generated) ;
    }
}


################################################################################
#
# Local rules.
#
################################################################################

# Detects versions listed as '.known-versions' by checking registry information,
# environment variables & default paths. Supports both native Windows and
# Cygwin.
#
local rule auto-detect-toolset-versions ( )
{
    if [ os.name ] in NT CYGWIN
    {
        # Get installation paths from the registry.
        for local i in $(.known-versions)
        {
            if $(.version-$(i)-reg)
            {
                local vc-path ;
                for local x in "" "Wow6432Node\\"
                {
                    vc-path += [ W32_GETREG
                        "HKEY_LOCAL_MACHINE\\SOFTWARE\\"$(x)"\\Microsoft\\"$(.version-$(i)-reg)
                        : "ProductDir" ] ;
                }

                if $(vc-path)
                {
                    vc-path = [ path.join [ path.make-NT $(vc-path[1]) ] "bin" ] ;
                    register-configuration $(i) : [ path.native $(vc-path[1]) ] ;
                }
            }
        }
    }

    # Check environment and default installation paths.
    for local i in $(.known-versions)
    {
        if ! $(i) in [ $(.versions).all ]
        {
            register-configuration $(i) : [ default-path $(i) ] ;
        }
    }
}


# Worker rule for toolset version configuration. Takes an explicit version id or
# nothing in case it should configure the default toolset version (the first
# registered one or a new 'default' one in case no toolset versions have been
# registered yet).
#
local rule configure-really ( version ? : options * )
{
    local v = $(version) ;

    # Decide what the 'default' version is.
    if ! $(v)
    {
        # Take the first registered (i.e. auto-detected) version.
        version = [ $(.versions).all ] ;
        version = $(version[1]) ;
        v = $(version) ;

        # Note: 'version' can still be empty at this point if no versions have
        # been auto-detected.
        version ?= "default" ;
    }

    # Version alias -> real version number.
    if $(.version-alias-$(version))
    {
        version = $(.version-alias-$(version)) ;
    }

    # Check whether the selected configuration is already in use.
    if $(version) in [ $(.versions).used ]
    {
        # Allow multiple 'toolset.using' calls for the same configuration if the
        # identical sets of options are used.
        if $(options) && ( $(options) != [ $(.versions).get $(version) : options ] )
        {
            import errors ;
            errors.error "MSVC toolset configuration: Toolset version"
                "'$(version)' already configured." ;
        }
    }
    else
    {
        # Register a new configuration.
        $(.versions).register $(version) ;

        # Add user-supplied to auto-detected options.
        options = [ $(.versions).get $(version) : options ] $(options) ;

        # Mark the configuration as 'used'.
        $(.versions).use $(version) ;

        # Generate conditions and save them.
        local conditions = [ common.check-init-parameters msvc : version $(v) ]
            ;

        $(.versions).set $(version) : conditions : $(conditions) ;

        local command = [ feature.get-values <command> : $(options) ] ;

        # If version is specified, we try to search first in default paths, and
        # only then in PATH.
        command = [ common.get-invocation-command msvc : cl.exe : $(command) :
            [ default-paths $(version) ] : $(version) ] ;

        common.handle-options msvc : $(conditions) : $(command) : $(options) ;

        if ! $(version)
        {
            # Even if version is not explicitly specified, try to detect the
            # version from the path.
            # FIXME: We currently detect both Microsoft Visual Studio 9.0 and
            # 9.0express as 9.0 here.
            if [ MATCH "(Microsoft Visual Studio 11)" : $(command) ]
            {
                version = 11.0 ;
            }
            else if [ MATCH "(Microsoft Visual Studio 10)" : $(command) ]
            {
                version = 10.0 ;
            }
            else if [ MATCH "(Microsoft Visual Studio 9)" : $(command) ]
            {
                version = 9.0 ;
            }
            else if [ MATCH "(Microsoft Visual Studio 8)" : $(command) ]
            {
                version = 8.0 ;
            }
            else if [ MATCH "(NET 2003[\/\\]VC7)" : $(command) ]
            {
                version = 7.1 ;
            }
            else if [ MATCH "(Microsoft Visual C\\+\\+ Toolkit 2003)" :
                $(command) ]
            {
                version = 7.1toolkit ;
            }
            else if [ MATCH "(.NET[\/\\]VC7)" : $(command) ]
            {
                version = 7.0 ;
            }
            else
            {
                version = 6.0 ;
            }
        }

        # Generate and register setup command.

        local below-8.0 = [ MATCH ^([67]\\.) : $(version) ] ;

        local cpu = i386 amd64 ia64 arm ;
        if $(below-8.0)
        {
            cpu = i386 ;
        }

        local setup-amd64 ;
        local setup-i386 ;
        local setup-ia64 ;
        local setup-arm ;

        if $(command)
        {
            # TODO: Note that if we specify a non-existant toolset version then
            # this rule may find and use a corresponding compiler executable
            # belonging to an incorrect toolset version. For example, if you
            # have only MSVC 7.1 installed, have its executable on the path and
            # specify you want Boost Build to use MSVC 9.0, then you want Boost
            # Build to report an error but this may cause it to silently use the
            # MSVC 7.1 compiler even though it thinks it is using the msvc-9.0
            # toolset version.
            command = [ common.get-absolute-tool-path $(command[-1]) ] ;
        }

        if $(command)
        {
            local parent = [ path.make $(command) ] ;
            parent = [ path.parent $(parent) ] ;
            parent = [ path.native $(parent) ] ;

            # Setup will be used if the command name has been specified. If
            # setup is not specified explicitly then a default setup script will
            # be used instead. Setup scripts may be global or arhitecture/
            # /platform/cpu specific. Setup options are used only in case of
            # global setup scripts.

            # Default setup scripts provided with different VC distributions:
            #
            #   VC 7.1 had only the vcvars32.bat script specific to 32 bit i386
            # builds. It was located in the bin folder for the regular version
            # and in the root folder for the free VC 7.1 tools.
            #
            #   Later 8.0 & 9.0 versions introduce separate platform specific
            # vcvars*.bat scripts (e.g. 32 bit, 64 bit AMD or 64 bit Itanium)
            # located in or under the bin folder. Most also include a global
            # vcvarsall.bat helper script located in the root folder which runs
            # one of the aforementioned vcvars*.bat scripts based on the options
            # passed to it. So far only the version coming with some PlatformSDK
            # distributions does not include this top level script but to
            # support those we need to fall back to using the worker scripts
            # directly in case the top level script can not be found.

            local global-setup = [ feature.get-values <setup> : $(options) ] ;
            global-setup = $(global-setup[1]) ;
            if ! $(below-8.0)
            {
                global-setup ?= [ locate-default-setup $(command) : $(parent) :
                    vcvarsall.bat ] ;
            }

            local default-setup-amd64 = vcvarsx86_amd64.bat ;
            local default-setup-i386  = vcvars32.bat ;
            local default-setup-ia64  = vcvarsx86_ia64.bat ;
            local default-setup-arm   = vcvarsx86_arm.bat ;

            # http://msdn2.microsoft.com/en-us/library/x4d2c09s(VS.80).aspx and
            # http://msdn2.microsoft.com/en-us/library/x4d2c09s(vs.90).aspx
            # mention an x86_IPF option, that seems to be a documentation bug
            # and x86_ia64 is the correct option.
            local default-global-setup-options-amd64 = x86_amd64 ;
            local default-global-setup-options-i386  = x86 ;
            local default-global-setup-options-ia64  = x86_ia64 ;
            local default-global-setup-options-arm   = x86_arm ;

            # When using 64-bit Windows, and targeting 64-bit, it is possible to
            # use a native 64-bit compiler, selected by the "amd64" & "ia64"
            # parameters to vcvarsall.bat. There are two variables we can use --
            # PROCESSOR_ARCHITECTURE and PROCESSOR_IDENTIFIER. The first is
            # 'x86' when running 32-bit Windows, no matter which processor is
            # used, and 'AMD64' on 64-bit windows on x86 (either AMD64 or EM64T)
            # Windows.
            #
            if [ MATCH ^(AMD64) : [ os.environ PROCESSOR_ARCHITECTURE ] ]
            {
                default-global-setup-options-amd64 = amd64 ;
            }
            # TODO: The same 'native compiler usage' should be implemented for
            # the Itanium platform by using the "ia64" parameter. For this
            # though we need someone with access to this platform who can find
            # out how to correctly detect this case.
            else if $(somehow-detect-the-itanium-platform)
            {
                default-global-setup-options-ia64 = ia64 ;
            }

            local setup-prefix = "call " ;
            local setup-suffix = " >nul"$(.nl) ;
            if ! [ os.name ] in NT
            {
                setup-prefix = "cmd.exe /S /C call " ;
                setup-suffix = " \">nul\" \"&&\" " ;
            }

            for local c in $(cpu)
            {
                local setup-options ;

                setup-$(c) = [ feature.get-values <setup-$(c)> : $(options) ] ;

                if ! $(setup-$(c))-is-not-empty
                {
                    if $(global-setup)-is-not-empty
                    {
                        setup-$(c) = $(global-setup) ;

                        # If needed we can easily add using configuration flags
                        # here for overriding which options get passed to the
                        # global setup command for which target platform:
                        # setup-options = [ feature.get-values <setup-options-$(c)> : $(options) ] ;

                        setup-options ?= $(default-global-setup-options-$(c)) ;
                    }
                    else
                    {
                        setup-$(c) = [ locate-default-setup $(command) : $(parent) : $(default-setup-$(c)) ] ;
                    }
                }

                # Cygwin to Windows path translation.
                setup-$(c) = "\""$(setup-$(c):W)"\"" ;

                # Append setup options to the setup name and add the final setup
                # prefix & suffix.
                setup-options ?= "" ;
                setup-$(c) = $(setup-prefix)$(setup-$(c):J=" ")" "$(setup-options:J=" ")$(setup-suffix) ;
            }
        }

        # Get tool names (if any) and finish setup.

        compiler = [ feature.get-values <compiler> : $(options) ] ;
        compiler ?= cl ;

        linker = [ feature.get-values <linker> : $(options) ] ;
        linker ?= link ;

        resource-compiler = [ feature.get-values <resource-compiler> : $(options) ] ;
        resource-compiler ?= rc ;

        # Turn on some options for i386 assembler
        #  -coff  generate COFF format object file (compatible with cl.exe output)
        local default-assembler-amd64 = ml64 ;
        local default-assembler-i386  = "ml -coff" ;
        local default-assembler-ia64  = ias ;
        local default-assembler-ia64  = armasm ;

        assembler = [ feature.get-values <assembler> : $(options) ] ;

        idl-compiler = [ feature.get-values <idl-compiler> : $(options) ] ;
        idl-compiler ?= midl ;

        mc-compiler = [ feature.get-values <mc-compiler> : $(options) ] ;
        mc-compiler ?= mc ;

        manifest-tool = [ feature.get-values <manifest-tool> : $(options) ] ;
        manifest-tool ?= mt ;

        local cc-filter = [ feature.get-values <compiler-filter> : $(options) ]
            ;

        for local c in $(cpu)
        {
            # Setup script is not required in some configurations.
            setup-$(c) ?= "" ;

            local cpu-conditions = $(conditions)/$(.cpu-arch-$(c)) ;

            if $(.debug-configuration)
            {
                for local cpu-condition in $(cpu-conditions)
                {
                    ECHO "notice: [msvc-cfg] condition: '$(cpu-condition)', setup: '$(setup-$(c))'" ;
                }
            }

            local cpu-assembler = $(assembler) ;
            cpu-assembler ?= $(default-assembler-$(c)) ;

            toolset.flags msvc.compile .CC  $(cpu-conditions) : $(setup-$(c))$(compiler) /Zm800 -nologo ;
            toolset.flags msvc.compile .RC  $(cpu-conditions) : $(setup-$(c))$(resource-compiler) ;
            toolset.flags msvc.compile .ASM $(cpu-conditions) : $(setup-$(c))$(cpu-assembler) -nologo ;
            toolset.flags msvc.link    .LD  $(cpu-conditions) : $(setup-$(c))$(linker) /NOLOGO /INCREMENTAL:NO ;
            toolset.flags msvc.archive .LD  $(cpu-conditions) : $(setup-$(c))$(linker) /lib /NOLOGO  ;
            toolset.flags msvc.compile .IDL $(cpu-conditions) : $(setup-$(c))$(idl-compiler) ;
            toolset.flags msvc.compile .MC  $(cpu-conditions) : $(setup-$(c))$(mc-compiler) ;

            toolset.flags msvc.link .MT $(cpu-conditions) : $(setup-$(c))$(manifest-tool) -nologo ;

            if $(cc-filter)
            {
                toolset.flags msvc .CC.FILTER $(cpu-conditions) : "|" $(cc-filter) ;
            }
        }

        # Set version-specific flags.
        configure-version-specific msvc : $(version) : $(conditions) ;
    }
}


# Returns the default installation path for the given version.
#
local rule default-path ( version )
{
    # Use auto-detected path if possible.
    local path = [ feature.get-values <command> : [ $(.versions).get $(version)
        : options ] ] ;

    if $(path)
    {
        path = $(path:D) ;
    }
    else
    {
        # Check environment.
        if $(.version-$(version)-env)
        {
            local vc-path = [ os.environ $(.version-$(version)-env) ] ;
            if $(vc-path)
            {
                vc-path = [ path.make $(vc-path) ] ;
                vc-path = [ path.join $(vc-path) $(.version-$(version)-envpath) ] ;
                vc-path = [ path.native $(vc-path) ] ;

                path = $(vc-path) ;
            }
        }

        # Check default path.
        if ! $(path) && $(.version-$(version)-path)
        {
            path = [ path.native [ path.join $(.ProgramFiles) $(.version-$(version)-path) ] ] ;
        }
    }

    return $(path) ;
}


# Returns either the default installation path (if 'version' is not empty) or
# list of all known default paths (if no version is given)
#
local rule default-paths ( version ? )
{
    local possible-paths ;

    if $(version)
    {
        possible-paths += [ default-path $(version) ] ;
    }
    else
    {
        for local i in $(.known-versions)
        {
            possible-paths += [ default-path $(i) ] ;
        }
    }

    return $(possible-paths) ;
}


rule get-rspline ( target : lang-opt )
{
    CC_RSPLINE on $(target) = [ on $(target) return $(lang-opt) -U$(UNDEFS)
        $(CFLAGS) $(C++FLAGS) $(OPTIONS) -c $(.nl)-D$(DEFINES)
        $(.nl)\"-I$(INCLUDES:W)\" ] ;
}

class msvc-linking-generator : linking-generator
{
    # Calls the base version.  If necessary, also create a target for the
    # manifest file.specifying source's name as the name of the created
    # target. As result, the PCH will be named whatever.hpp.gch, and not
    # whatever.gch.
    rule generated-targets ( sources + : property-set : project name ? )
    {
        local result = [ linking-generator.generated-targets $(sources)
          : $(property-set) : $(project) $(name) ] ;

        if $(result)
        {
            local name-main = [ $(result[0]).name ] ;
            local action = [ $(result[0]).action ] ;

            if [ $(property-set).get <debug-symbols> ] = "on"
            {
                # We force the exact name on PDB. The reason is tagging -- the
                # tag rule may reasonably special case some target types, like
                # SHARED_LIB. The tag rule will not catch PDBs, and it cannot
                # even easily figure out if a PDB is paired with a SHARED_LIB,
                # EXE or something else. Because PDBs always get the same name
                # as the main target, with .pdb as extension, just force it.
                local target = [ class.new file-target $(name-main:S=.pdb) exact
                    : PDB : $(project) : $(action) ] ;
                local registered-target = [ virtual-target.register $(target) ]
                    ;
                if $(target) != $(registered-target)
                {
                    $(action).replace-targets $(target) : $(registered-target) ;
                }
                result += $(registered-target) ;
            }

            if [ $(property-set).get <embed-manifest> ] = "off"
            {
                # Manifest is an evil target. It has .manifest appened to the
                # name of the main target, including extension, e.g.
                # a.exe.manifest. We use the 'exact' name to achieve this
                # effect.
                local target = [ class.new file-target $(name-main).manifest
                    exact : MANIFEST : $(project) : $(action) ] ;
                local registered-target = [ virtual-target.register $(target) ]
                    ;
                if $(target) != $(registered-target)
                {
                    $(action).replace-targets $(target) : $(registered-target) ;
                }
                result += $(registered-target) ;
            }
        }
        return $(result) ;
    }
}


# Unsafe worker rule for the register-toolset() rule. Must not be called
# multiple times.
#
local rule register-toolset-really ( )
{
    feature.extend toolset : msvc ;

    # Intel and msvc supposedly have link-compatible objects.
    feature.subfeature toolset msvc : vendor : intel : propagated optional ;

    # Inherit MIDL flags.
    toolset.inherit-flags msvc : midl ;

    # Inherit MC flags.
    toolset.inherit-flags msvc : mc ;

    # Dynamic runtime comes only in MT flavour.
    toolset.add-requirements
        <toolset>msvc,<runtime-link>shared:<threading>multi ;

    # Declare msvc toolset specific features.
    {
        feature.feature debug-store : object database : propagated ;
        feature.feature pch-source  :                 : dependency free ;
    }

    # Declare generators.
    {
        # TODO: Is it possible to combine these? Make the generators
        # non-composing so that they do not convert each source into a separate
        # .rsp file.
        generators.register [ new msvc-linking-generator msvc.link :
            OBJ SEARCHED_LIB STATIC_LIB IMPORT_LIB : EXE : <toolset>msvc ] ;
        generators.register [ new msvc-linking-generator msvc.link.dll :
            OBJ SEARCHED_LIB STATIC_LIB IMPORT_LIB : SHARED_LIB IMPORT_LIB :
            <toolset>msvc ] ;

        generators.register-archiver msvc.archive : OBJ : STATIC_LIB : <toolset>msvc ;
        generators.register-c-compiler msvc.compile.c++ : CPP : OBJ : <toolset>msvc ;
        generators.register-c-compiler msvc.compile.c : C : OBJ : <toolset>msvc ;
        generators.register-c-compiler msvc.compile.c++.preprocess : CPP : PREPROCESSED_CPP : <toolset>msvc ;
        generators.register-c-compiler msvc.compile.c.preprocess : C : PREPROCESSED_C : <toolset>msvc ;

        # Using 'register-c-compiler' adds the build directory to INCLUDES.
        generators.register-c-compiler msvc.compile.rc : RC : OBJ(%_res) : <toolset>msvc ;
        generators.override msvc.compile.rc : rc.compile.resource ;
        generators.register-standard msvc.compile.asm : ASM : OBJ : <toolset>msvc ;

        generators.register-c-compiler msvc.compile.idl : IDL : MSTYPELIB H C(%_i) C(%_proxy) C(%_dlldata) : <toolset>msvc ;
        generators.override msvc.compile.idl : midl.compile.idl ;

        generators.register-standard msvc.compile.mc : MC : H RC : <toolset>msvc ;
        generators.override msvc.compile.mc : mc.compile ;

        # Note: the 'H' source type will catch both '.h' and '.hpp' headers as
        # the latter have their HPP type derived from H. The type of compilation
        # is determined entirely by the destination type.
        generators.register [ new msvc-pch-generator msvc.compile.c.pch   : H :   C_PCH OBJ : <pch>on <toolset>msvc ] ;
        generators.register [ new msvc-pch-generator msvc.compile.c++.pch : H : CPP_PCH OBJ : <pch>on <toolset>msvc ] ;

        generators.override msvc.compile.c.pch   : pch.default-c-pch-generator ;
        generators.override msvc.compile.c++.pch : pch.default-cpp-pch-generator ;
    }

    toolset.flags msvc.compile PCH_FILE   <pch>on : <pch-file>   ;
    toolset.flags msvc.compile PCH_SOURCE <pch>on : <pch-source> ;
    toolset.flags msvc.compile PCH_HEADER <pch>on : <pch-header> ;

    #
    # Declare flags for compilation.
    #

    toolset.flags msvc.compile CFLAGS <optimization>speed : /O2 ;
    toolset.flags msvc.compile CFLAGS <optimization>space : /O1 ;

    toolset.flags msvc.compile CFLAGS $(.cpu-arch-ia64)/<instruction-set>$(.cpu-type-itanium) : /G1 ;
    toolset.flags msvc.compile CFLAGS $(.cpu-arch-ia64)/<instruction-set>$(.cpu-type-itanium2) : /G2 ;

    toolset.flags msvc.compile CFLAGS <debug-symbols>on/<debug-store>object : /Z7 ;
    toolset.flags msvc.compile CFLAGS <debug-symbols>on/<debug-store>database : /Zi ;
    toolset.flags msvc.compile CFLAGS <optimization>off : /Od ;
    toolset.flags msvc.compile CFLAGS <inlining>off : /Ob0 ;
    toolset.flags msvc.compile CFLAGS <inlining>on : /Ob1 ;
    toolset.flags msvc.compile CFLAGS <inlining>full : /Ob2 ;

    toolset.flags msvc.compile CFLAGS <warnings>on : /W3 ;
    toolset.flags msvc.compile CFLAGS <warnings>off : /W0 ;
    toolset.flags msvc.compile CFLAGS <warnings>all : /W4 ;
    toolset.flags msvc.compile CFLAGS <warnings-as-errors>on : /WX ;

    toolset.flags msvc.compile C++FLAGS  <exception-handling>on/<asynch-exceptions>off/<extern-c-nothrow>off : /EHs ;
    toolset.flags msvc.compile C++FLAGS  <exception-handling>on/<asynch-exceptions>off/<extern-c-nothrow>on : /EHsc ;
    toolset.flags msvc.compile C++FLAGS  <exception-handling>on/<asynch-exceptions>on/<extern-c-nothrow>off : /EHa ;
    toolset.flags msvc.compile C++FLAGS  <exception-handling>on/<asynch-exceptions>on/<extern-c-nothrow>on : /EHac ;

    # By default 8.0 enables rtti support while prior versions disabled it. We
    # simply enable or disable it explicitly so we do not have to depend on this
    # default behaviour.
    toolset.flags msvc.compile CFLAGS <rtti>on : /GR ;
    toolset.flags msvc.compile CFLAGS <rtti>off : /GR- ;
    toolset.flags msvc.compile CFLAGS <runtime-debugging>off/<runtime-link>shared : /MD ;
    toolset.flags msvc.compile CFLAGS <runtime-debugging>on/<runtime-link>shared : /MDd ;

    toolset.flags msvc.compile CFLAGS <runtime-debugging>off/<runtime-link>static/<threading>multi : /MT ;
    toolset.flags msvc.compile CFLAGS <runtime-debugging>on/<runtime-link>static/<threading>multi : /MTd ;

    toolset.flags msvc.compile OPTIONS <cflags> : ;
    toolset.flags msvc.compile.c++ OPTIONS <cxxflags> : ;

    toolset.flags msvc.compile PDB_CFLAG <debug-symbols>on/<debug-store>database : /Fd ;

    toolset.flags msvc.compile DEFINES <define> ;
    toolset.flags msvc.compile UNDEFS <undef> ;
    toolset.flags msvc.compile INCLUDES <include> ;

    # Declare flags for the assembler.
    toolset.flags msvc.compile.asm USER_ASMFLAGS <asmflags> ;

    toolset.flags msvc.compile.asm ASMFLAGS <debug-symbols>on : "/Zi /Zd" ;

    toolset.flags msvc.compile.asm ASMFLAGS <warnings>on : /W3 ;
    toolset.flags msvc.compile.asm ASMFLAGS <warnings>off : /W0 ;
    toolset.flags msvc.compile.asm ASMFLAGS <warnings>all : /W4 ;
    toolset.flags msvc.compile.asm ASMFLAGS <warnings-as-errors>on : /WX ;

    toolset.flags msvc.compile.asm DEFINES <define> ;

    # Declare flags for linking.
    {
        toolset.flags msvc.link PDB_LINKFLAG <debug-symbols>on/<debug-store>database : /PDB: ;  # not used yet
        toolset.flags msvc.link LINKFLAGS <debug-symbols>on : /DEBUG ;
        toolset.flags msvc.link DEF_FILE <def-file> ;

        # The linker disables the default optimizations when using /DEBUG so we
        # have to enable them manually for release builds with debug symbols.
        toolset.flags msvc LINKFLAGS <debug-symbols>on/<runtime-debugging>off : /OPT:REF,ICF ;

        toolset.flags msvc LINKFLAGS <user-interface>console : /subsystem:console ;
        toolset.flags msvc LINKFLAGS <user-interface>gui : /subsystem:windows ;
        toolset.flags msvc LINKFLAGS <user-interface>wince : /subsystem:windowsce ;
        toolset.flags msvc LINKFLAGS <user-interface>native : /subsystem:native ;
        toolset.flags msvc LINKFLAGS <user-interface>auto : /subsystem:posix ;

        toolset.flags msvc.link OPTIONS <linkflags> ;
        toolset.flags msvc.link LINKPATH <library-path> ;

        toolset.flags msvc.link FINDLIBS_ST <find-static-library> ;
        toolset.flags msvc.link FINDLIBS_SA <find-shared-library> ;
        toolset.flags msvc.link LIBRARY_OPTION <toolset>msvc : "" : unchecked ;
        toolset.flags msvc.link LIBRARIES_MENTIONED_BY_FILE : <library-file> ;
    }

    toolset.flags msvc.archive AROPTIONS <archiveflags> ;
}


# Locates the requested setup script under the given folder and returns its full
# path or nothing in case the script can not be found. In case multiple scripts
# are found only the first one is returned.
#
# TODO: There used to exist a code comment for the msvc.init rule stating that
# we do not correctly detect the location of the vcvars32.bat setup script for
# the free VC7.1 tools in case user explicitly provides a path. This should be
# tested or simply remove this whole comment in case this toolset version is no
# longer important.
#
local rule locate-default-setup ( command : parent : setup-name )
{
    local result = [ GLOB $(command) $(parent) : $(setup-name) ] ;
    if $(result[1])
    {
        return $(result[1]) ;
    }
}


# Validates given path, registers found configuration and prints debug
# information about it.
#
local rule register-configuration ( version : path ? )
{
    if $(path)
    {
        local command = [ GLOB $(path) : cl.exe ] ;

        if $(command)
        {
            if $(.debug-configuration)
            {
                ECHO notice: [msvc-cfg] msvc-$(version) detected, command:
                    '$(command)' ;
            }

            $(.versions).register $(version) ;
            $(.versions).set $(version) : options : <command>$(command) ;
        }
    }
}


################################################################################
#
#   Startup code executed when loading this module.
#
################################################################################

if [ MATCH (--debug-configuration) : [ modules.peek : ARGV ] ]
{
    .debug-configuration = true ;
}

# Miscellaneous constants.
.RM = [ common.rm-command ] ;
.nl = "
" ;
.ProgramFiles = [ path.make [ common.get-program-files-dir ] ] ;
.escaped-double-quote = "\"" ;
.TOUCH_FILE = [ common.file-touch-command ] ;

# List of all registered configurations.
.versions = [ new configurations ] ;

# Supported CPU architectures.
.cpu-arch-i386 =
    <architecture>/<address-model>
    <architecture>/<address-model>32
    <architecture>x86/<address-model>
    <architecture>x86/<address-model>32 ;

.cpu-arch-amd64 =
    <architecture>/<address-model>64
    <architecture>x86/<address-model>64 ;

.cpu-arch-ia64 =
    <architecture>ia64/<address-model>
    <architecture>ia64/<address-model>64 ;

.cpu-arch-arm =
    <architecture>arm/<address-model>32 ;


# Supported CPU types (only Itanium optimization options are supported from
# VC++ 2005 on). See
# http://msdn2.microsoft.com/en-us/library/h66s5s0e(vs.90).aspx for more
# detailed information.
.cpu-type-g5       = i586 pentium pentium-mmx ;
.cpu-type-g6       = i686 pentiumpro pentium2 pentium3 pentium3m pentium-m k6
                     k6-2 k6-3 winchip-c6 winchip2 c3 c3-2 ;
.cpu-type-em64t    = prescott nocona core2 corei7 corei7-avx core-avx-i
                     conroe conroe-xe conroe-l allendale merom
                     merom-xe kentsfield kentsfield-xe penryn wolfdale
                     yorksfield nehalem sandy-bridge ivy-bridge haswell ;
.cpu-type-amd64    = k8 opteron athlon64 athlon-fx k8-sse3 opteron-sse3
                     athlon64-sse3 amdfam10 barcelona bdver1 bdver2 bdver3 btver1 btver2 ;
.cpu-type-g7       = pentium4 pentium4m athlon athlon-tbird athlon-4 athlon-xp
                     athlon-mp $(.cpu-type-em64t) $(.cpu-type-amd64) ;
.cpu-type-itanium  = itanium itanium1 merced ;
.cpu-type-itanium2 = itanium2 mckinley ;


# Known toolset versions, in order of preference.
.known-versions = 11.0 10.0 10.0express 9.0 9.0express 8.0 8.0express 7.1
    7.1toolkit 7.0 6.0 ;

# Version aliases.
.version-alias-6 = 6.0 ;
.version-alias-6.5 = 6.0 ;
.version-alias-7 = 7.0 ;
.version-alias-8 = 8.0 ;
.version-alias-9 = 9.0 ;
.version-alias-10 = 10.0 ;
.version-alias-11 = 11.0 ;

# Names of registry keys containing the Visual C++ installation path (relative
# to "HKEY_LOCAL_MACHINE\SOFTWARE\\Microsoft").
.version-6.0-reg = "VisualStudio\\6.0\\Setup\\Microsoft Visual C++" ;
.version-7.0-reg = "VisualStudio\\7.0\\Setup\\VC" ;
.version-7.1-reg = "VisualStudio\\7.1\\Setup\\VC" ;
.version-8.0-reg = "VisualStudio\\8.0\\Setup\\VC" ;
.version-8.0express-reg = "VCExpress\\8.0\\Setup\\VC" ;
.version-9.0-reg = "VisualStudio\\9.0\\Setup\\VC" ;
.version-9.0express-reg = "VCExpress\\9.0\\Setup\\VC" ;
.version-10.0-reg = "VisualStudio\\10.0\\Setup\\VC" ;
.version-10.0express-reg = "VCExpress\\10.0\\Setup\\VC" ;
.version-11.0-reg = "VisualStudio\\11.0\\Setup\\VC" ;

# Visual C++ Toolkit 2003 does not store its installation path in the registry.
# The environment variable 'VCToolkitInstallDir' and the default installation
# path will be checked instead.
.version-7.1toolkit-path    = "Microsoft Visual C++ Toolkit 2003" "bin" ;
.version-7.1toolkit-env     = VCToolkitInstallDir ;

# Path to the folder containing "cl.exe" relative to the value of the
# corresponding environment variable.
.version-7.1toolkit-envpath = "bin" ;


# Auto-detect all the available msvc installations on the system.
auto-detect-toolset-versions ;


# And finally trigger the actual Boost Build toolset registration.
register-toolset ;