kdelibs5-dev 4:4.13.0-0ubuntu1 / usr / include / ktexteditor / document.h

/* This file is part of the KDE libraries
   Copyright (C) 2001 Christoph Cullmann <cullmann@kde.org>
   Copyright (C) 2005 Dominik Haumann (dhdev@gmx.de) (documentation)

   This library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Library General Public
   License as published by the Free Software Foundation; either
   version 2 of the License, or (at your option) any later version.

   This library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   Library General Public License for more details.

   You should have received a copy of the GNU Library General Public License
   along with this library; see the file COPYING.LIB.  If not, write to
   the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
   Boston, MA 02110-1301, USA.
*/

#ifndef KDELIBS_KTEXTEDITOR_DOCUMENT_H
#define KDELIBS_KTEXTEDITOR_DOCUMENT_H

#include <ktexteditor/ktexteditor_export.h>
// the very important KTextEditor::Cursor class
#include <ktexteditor/cursor.h>
#include <ktexteditor/range.h>

// our main baseclass of the KTextEditor::Document
#include <kparts/part.h>

// the list of views
#include <QtCore/QList>
#include <QtCore/QMetaType>

namespace KTextEditor
{

class Editor;
class View;

/**
 * \brief A KParts derived class representing a text document.
 *
 * Topics:
 *  - \ref doc_intro
 *  - \ref doc_manipulation
 *  - \ref doc_views
 *  - \ref doc_extensions
 *
 * \section doc_intro Introduction
 *
 * The Document class represents a pure text document providing methods to
 * modify the content and create views. A document can have any number
 * of views, each view representing the same content, i.e. all views are
 * synchronized. Support for text selection is handled by a View and text
 * format attributes by the Attribute class.
 *
 * To load a document call KParts::ReadOnlyPart::openUrl().
 * To reload a document from a file call documentReload(), to save the
 * document call documentSave() or documentSaveAs(). Whenever the modified
 * state of the document changes the signal modifiedChanged() is emitted.
 * Check the modified state with KParts::ReadWritePart::isModified().
 * Further signals are documentUrlChanged(). The encoding can be specified
 * with setEncoding(), however this will only take effect on file reload and
 * file save.
 *
 * \section doc_manipulation Text Manipulation
 *
 * Get the whole content with text() and set new content with setText().
 * Call insertText() or insertLine() to insert new text or removeText()
 * and removeLine() to remove content. Whenever the document's content
 * changed the signal textChanged() is emitted. Additional signals are
 * textInserted() and textRemoved(). Note, that the first line in the
 * document is line 0.
 *
 * If the editor part supports it, a document provides full undo/redo history.
 * Text manipulation actions can be grouped together using startEditing()
 * and endEditing(). All actions in between are grouped together to only one
 * undo/redo action. Due to internal reference counting you can call
 * startEditing() and endEditing() as often as you wish, but make sure you
 * call endEditing() exactly as often as you call startEditing(), otherwise
 * the reference counter gets confused.
 *
 * \section doc_views Document Views
 *
 * A View displays the document's content. As already mentioned, a document
 * can have any number of views, all synchronized. Get a list of all views
 * with views(). Only one of the views can be active (i.e. has focus), get
 * it by using activeView(). Create a new view with createView(). Every time
 * a new view is created the signal viewCreated() is emitted.
 *
 * \section doc_extensions Document Extension Interfaces
 *
 * A simple document represents text and provides text manipulation methods.
 * However, a real text editor should support advanced concepts like session
 * support, textsearch support, bookmark/general mark support etc. That is why
 * the KTextEditor library provides several additional interfaces to extend
 * a document's capabilities via multiple inheritance.
 *
 * More information about interfaces for the document can be found in
 * \ref kte_group_doc_extensions.
 *
 * \see KParts::ReadWritePart, KTextEditor::Editor, KTextEditor::View,
 *      KTextEditor::MarkInterface,
 *      KTextEditor::ModificationInterface, KTextEditor::SearchInterface,
 *      KTextEditor::SessionConfigInterface, KTextEditor::SmartInterface,
 *      KTextEditor::VariableInterface
 * \author Christoph Cullmann \<cullmann@kde.org\>
 */
class KTEXTEDITOR_EXPORT Document : public KParts::ReadWritePart
{
  Q_OBJECT

  public:
    /**
     * Constructor.
     *
     * Create a new document with \p parent.
     * \param parent parent object
     * \see Editor::createDocument()
     */
    Document ( QObject *parent = 0);

    /**
     * Virtual destructor.
     */
    virtual ~Document ();

  /*
   * Methods to create and manage the views of this document and access the
   * global editor object.
   */
  public:
    /**
     * Get the global editor object. The editor part implementation must
     * ensure that this object exists as long as any factory or document
     * object exists.
     * \return global KTextEditor::Editor object
     * \see KTextEditor::Editor
     */
    virtual Editor *editor () = 0;

    /**
     * Create a new view attached to @p parent.
     * @param parent parent widget
     * @return the new view
     */
    virtual View *createView ( QWidget *parent ) = 0;

    /**
     * Return the view which currently has user focus, if any.
     */
    virtual View* activeView() const = 0;

    /**
     * Returns the views pre-casted to KTextEditor::View%s
     */
    virtual const QList<View*> &views() const = 0;

  Q_SIGNALS:
   /**
    * This signal is emitted whenever the \p document creates a new \p view.
    * It should be called for every view to help applications / plugins to
    * attach to the \p view.
    * \attention This signal should be emitted after the view constructor is
    *            completed, e.g. in the createView() method.
    * \param document the document for which a new view is created
    * \param view the new view
    * \see createView()
    */
    void viewCreated (KTextEditor::Document *document, KTextEditor::View *view);

  /*
   * General information about this document and its content.
   */
  public:
    /**
     * Get this document's name.
     * The editor part should provide some meaningful name, like some unique
     * "Untitled XYZ" for the document - \e without URL or basename for
     * documents with url.
     * \return readable document name
     */
    virtual const QString &documentName () const = 0;

    /**
     * Get this document's mimetype.
     * \return mimetype
     */
    virtual QString mimeType() = 0;

  /*
   * SIGNALS
   * following signals should be emitted by the editor document.
   */
  Q_SIGNALS:
    /**
     * This signal is emitted whenever the \p document name changes.
     * \param document document which changed its name
     * \see documentName()
     */
    void documentNameChanged ( KTextEditor::Document *document );

    /**
     * This signal is emitted whenever the \p document URL changes.
     * \param document document which changed its URL
     * \see KParts::ReadOnlyPart::url()
     */
    void documentUrlChanged ( KTextEditor::Document *document );

    /**
     * This signal is emitted whenever the \p document's buffer changed from
     * either state \e unmodified to \e modified or vice versa.
     *
     * \param document document which changed its modified state
     * \see KParts::ReadWritePart::isModified().
     * \see KParts::ReadWritePart::setModified()
     */
    void modifiedChanged ( KTextEditor::Document *document );

    /**
     * This signal is emitted whenever the readWrite state of a document changes
     */
//warning ADD IN KDE5
//    void readWriteChanged (KTextEditor::Document *document);

  /*
   * VERY IMPORTANT: Methods to set and query the current encoding of the
   * document
   */
  public:
    /**
     * Set the encoding for this document. This encoding will be used
     * while loading and saving files, it will \e not affect the already
     * existing content of the document, e.g. if the file has already been
     * opened without the correct encoding, this will \e not fix it, you
     * would for example need to trigger a reload for this.
     * \param encoding new encoding for the document, the name must be
     *        accepted by QTextCodec, if an empty encoding name is given, the
     *        part should fallback to its own default encoding, e.g. the
     *        system encoding or the global user settings
     * \return \e true on success, or \e false, if the encoding could not be set.
     * \see encoding()
     */
    virtual bool setEncoding (const QString &encoding) = 0;

    /**
     * Get the current chosen encoding. The return value is an empty string,
     * if the document uses the default encoding of the editor and no own
     * special encoding.
     * \return current encoding of the document
     * \see setEncoding()
     */
    virtual const QString &encoding () const = 0;

  /*
   * General file related actions.
   * All this actions cause user interaction in some cases.
   */
  public:
    /**
     * Reload the current file.
     * The user will be prompted by the part on changes and more and can
     * cancel this action if it can harm.
     * \return \e true if the reload has been done, otherwise \e false. If
     *         the document has no url set, it will just return \e false.
     */
    virtual bool documentReload () = 0;

    /**
     * Save the current file.
     * The user will be asked for a filename if needed and more.
     * \return \e true on success, i.e. the save has been done, otherwise
     *         \e false
     */
    virtual bool documentSave () = 0;

    /**
     * Save the current file to another location.
     * The user will be asked for a filename and more.
     * \return \e true on success, i.e. the save has been done, otherwise
     *         \e false
     */
    virtual bool documentSaveAs () = 0;

 Q_SIGNALS:
    /**
    * This signal should be emitted after a document has been saved to disk or for remote files uploaded.
    * saveAs should be set to true, if the operation is a save as operation
    */
    void documentSavedOrUploaded(KTextEditor::Document* document,bool saveAs);

 /*
  * Methodes to create/end editing sequences.
  */
 public:
    /**
     * Begin an editing sequence.
     * Edit commands during this sequence will be bunched together so that
     * they represent a single undo command in the editor, and so that
     * repaint events do not occur inbetween.
     *
     * Your application should \e not return control to the event loop while
     * it has an unterminated (i.e. no matching endEditing() call) editing
     * sequence (result undefined) - so do all of your work in one go!
     *
     * This call stacks, like the endEditing() calls, this means you can
     * safely call it three times in a row for example if you call
     * endEditing() three times, too, it internaly just does counting the
     * running editing sessions.
     *
     * If the texteditor part does not support these transactions,
     * both calls just do nothing.
     *
     * \return \e true on success, otherwise \e false. Parts not supporting
     *         it should return \e false
     * \see endEditing()
     */
    virtual bool startEditing () = 0;

    /**
     * End an editing sequence.
     * \return \e true on success, otherwise \e false. Parts not supporting
     *         it should return \e false.
     * \see startEditing() for more details
     */
    virtual bool endEditing () = 0;

  /*
   * General access to the document's text content.
   */
  public:
    /**
     * Get the document content.
     * \return the complete document content
     * \see setText()
     */
    virtual QString text () const = 0;

    /**
     * Get the document content within the given \p range.
     * \param range the range of text to retrieve
     * \param block Set this to \e true to receive text in a visual block,
     *        rather than everything inside \p range.
     * \return the requested text part, or QString() for invalid ranges.
     * \see setText()
     */
    virtual QString text ( const Range& range, bool block = false ) const = 0;

    /**
     * Get the character at \p cursor.
     * \param position the location of the character to retrieve
     * \return the requested character, or QChar() for invalid cursors.
     * \see setText()
     */
    virtual QChar character( const Cursor& position ) const = 0;

    /**
     * Get the document content within the given \p range.
     * \param range the range of text to retrieve
     * \param block Set this to \e true to receive text in a visual block,
     *        rather than everything inside \p range.
     * \return the requested text lines, or QStringList() for invalid ranges.
     *         no end of line termination is included.
     * \see setText()
     */
    virtual QStringList textLines ( const Range& range, bool block = false ) const = 0;

    /**
     * Get a single text line.
     * \param line the wanted line
     * \return the requested line, or "" for invalid line numbers
     * \see text(), lineLength()
     */
    virtual QString line ( int line ) const = 0;

    /**
     * Get the count of lines of the document.
     * \return the current number of lines in the document
     * \see length()
     */
    virtual int lines () const = 0;

    /**
     * End position of the document.
     * \return The last column on the last line of the document
     * \see all()
     */
    virtual Cursor documentEnd() const = 0;

    /**
     * A Range which encompasses the whole document.
     * \return A range from the start to the end of the document
     */
    inline Range documentRange() const { return Range(Cursor::start(), documentEnd()); }

    /**
     * Get the count of characters in the document. A TAB character counts as
     * only one character.
     * \return the number of characters in the document
     * \see lines()
     */
    virtual int totalCharacters() const = 0;

    /**
     * Returns if the document is empty.
     */
    virtual bool isEmpty() const;

    /**
     * Get the length of a given line in characters.
     * \param line line to get length from
     * \return the number of characters in the line or -1 if the line was
     *         invalid
     * \see line()
     */
    virtual int lineLength ( int line ) const = 0;

    /**
     * Get the end cursor position of line \p line.
     * \param line line
     * \see lineLength(), line()
     */
    inline Cursor endOfLine(int line) const { return Cursor(line, lineLength(line)); }

    /**
     * Set the given text as new document content.
     * \param text new content for the document
     * \return \e true on success, otherwise \e false
     * \see text()
     */
    virtual bool setText ( const QString &text ) = 0;

    /**
     * Set the given text as new document content.
     * \param text new content for the document
     * \return \e true on success, otherwise \e false
     * \see text()
     */
    virtual bool setText ( const QStringList &text ) = 0;

    /**
     * Remove the whole content of the document.
     * \return \e true on success, otherwise \e false
     * \see removeText(), removeLine()
     */
    virtual bool clear () = 0;

    /**
     * Insert \p text at \p position.
     * \param position position to insert the text
     * \param text text to insert
     * \param block insert this text as a visual block of text rather than a linear sequence
     * \return \e true on success, otherwise \e false
     * \see setText(), removeText()
     */
    virtual bool insertText ( const Cursor &position, const QString &text, bool block = false ) = 0;

    /**
     * Insert \p text at \p position.
     * \param position position to insert the text
     * \param text text to insert
     * \param block insert this text as a visual block of text rather than a linear sequence
     * \return \e true on success, otherwise \e false
     * \see setText(), removeText()
     */
    virtual bool insertText ( const Cursor &position, const QStringList &text, bool block = false ) = 0;

    /**
     * Replace text from \p range with specified \p text.
     * \param range range of text to replace
     * \param text text to replace with
     * \param block replace text as a visual block of text rather than a linear sequence
     * \return \e true on success, otherwise \e false
     * \see setText(), removeText(), insertText()
     */
    virtual bool replaceText ( const Range &range, const QString &text, bool block = false );

    /**
     * Replace text from \p range with specified \p text.
     * \param range range of text to replace
     * \param text text to replace with
     * \param block replace text as a visual block of text rather than a linear sequence
     * \return \e true on success, otherwise \e false
     * \see setText(), removeText(), insertText()
     */
    virtual bool replaceText ( const Range &range, const QStringList &text, bool block = false );

    /**
     * Remove the text specified in \p range.
     * \param range range of text to remove
     * \param block set this to true to remove a text block on the basis of columns, rather than everything inside \p range
     * \return \e true on success, otherwise \e false
     * \see setText(), insertText()
     */
    virtual bool removeText ( const Range &range, bool block = false ) = 0;

    /**
     * Checks whether the \p cursor specifies a valid position in a document.
     * It can optionally be overridden by an implementation.
     * \param cursor which should be checked
     * \return \e true, if the cursor is valid, otherwise \e false
     * \see SmartCursor::isValid()
     */
    virtual bool cursorInText(const Cursor &cursor);

    /**
     * Insert line(s) at the given line number. The newline character '\\n'
     * is treated as line delimiter, so it is possible to insert multiple
     * lines. To append lines at the end of the document, use
     * \code
     * insertLine( lines(), text )
     * \endcode
     * \param line line where to insert the text
     * \param text text which should be inserted
     * \return \e true on success, otherwise \e false
     * \see insertText()
     */
    virtual bool insertLine ( int line, const QString &text ) = 0;

    /**
     * Insert line(s) at the given line number. The newline character '\\n'
     * is treated as line delimiter, so it is possible to insert multiple
     * lines. To append lines at the end of the document, use
     * \code
     * insertLine( lines(), text )
     * \endcode
     * \param line line where to insert the text
     * \param text text which should be inserted
     * \return \e true on success, otherwise \e false
     * \see insertText()
     */
    virtual bool insertLines ( int line, const QStringList &text ) = 0;

    /**
     * Remove \p line from the document.
     * \param line line to remove
     * \return \e true on success, otherwise \e false
     * \see removeText(), clear()
     */
    virtual bool removeLine ( int line ) = 0;

  /*
   * SIGNALS
   * Following signals should be emitted by the document if the text content
   * is changed.
   */
  Q_SIGNALS:
    /**
     * The \p document emits this signal whenever its text changes.
     * \param document document which emitted this signal
     * \see text(), textLine()
     */
    void textChanged(KTextEditor::Document *document);

    /**
     * The \p document emits this signal whenever text was inserted.  The
     * insertion occurred at range.start(), and new text now occupies up to
     * range.end().
     * \param document document which emitted this signal
     * \param range range that the newly inserted text occupies
     * \see insertText(), insertLine()
     */
    void textInserted(KTextEditor::Document *document, const KTextEditor::Range& range);

    /**
     * The \p document emits this signal whenever \p range was removed, i.e.
     * text was removed.
     * \param document document which emitted this signal
     * \param range range that the removed text previously occupied
     * \see removeText(), removeLine(), clear()
     */
    void textRemoved(KTextEditor::Document *document, const KTextEditor::Range& range);

    /**
     * The \p document emits this signal whenever \p range was removed, i.e.
     * text was removed.
     * \param document document which emitted this signal
     * \param range range that the removed text previously occupied
     * \param oldText the text that has been removed
     * \see removeText(), removeLine(), clear()
     */
    void textRemoved(KTextEditor::Document *document, const KTextEditor::Range& range, const QString& oldText);
    
    /**
     * The \p document emits this signal whenever the text in range
     * \p oldRange was removed and replaced with the text now in \e newRange,
     * e.g. the user selects text and pastes new text to replace the selection.
     * \note \p oldRange.start() is guaranteed to equal \p newRange.start().
     * \param document document which emitted this signal
     * \param oldRange range that the text previously occupied
     * \param newRange range that the changed text now occupies
     * \see insertText(), insertLine(), removeText(), removeLine(), clear()
     */
    void textChanged(KTextEditor::Document *document, const KTextEditor::Range& oldRange, const KTextEditor::Range& newRange);

    /**
     * The \p document emits this signal whenever the text in range
     * \p oldRange was removed and replaced with the text now in \e newRange,
     * e.g. the user selects text and pastes new text to replace the selection.
     * \note \p oldRange.start() is guaranteed to equal \p newRange.start().
     * \param document document which emitted this signal
     * \param oldRange range that the text previously occupied
     * \param oldText old text that has been replaced
     * \param newRange range that the changed text now occupies
     * \see insertText(), insertLine(), removeText(), removeLine(), clear()
     */
    void textChanged(KTextEditor::Document *document, const KTextEditor::Range& oldRange, const QString& oldText, const KTextEditor::Range& newRange);
    
    /**
     * Warn anyone listening that the current document is about to close.
     * At this point all of the information is still accessible, such as the text,
     * cursors and ranges.
     *
     * Any modifications made to the document at this point will be lost.
     *
     * \param document the document being closed
     */
    void aboutToClose(KTextEditor::Document *document);

    /**
     * Warn anyone listening that the current document is about to reload.
     * At this point all of the information is still accessible, such as the text,
     * cursors and ranges.
     *
     * Any modifications made to the document at this point will be lost.
     *
     * \param document the document being reloaded
     */
    void aboutToReload(KTextEditor::Document *document);

    /**
     * Emitted after the current document was reloaded.
     * At this point, some information might have been invalidated, like
     * for example the editing history.
     *
     * \param document the document that was reloaded.
     * 
     * @since 4.6
     */
    void reloaded(KTextEditor::Document *document);

    /**
     * Upon emission, the document's content may only be changed by the initiator
     * of this signal until exclusiveEditEnd() is signalled. It is, however,
     * possible to listen to changes of the content.
     *
     * Signalled e.g. on undo or redo.
     *
     * @since 4.5
     */
    void exclusiveEditStart(KTextEditor::Document *document);

    /**
     * In conjunction with exclusiveEditStart(), signals that the document's content
     * may be changed again without restriction.
     *
     * @since 4.5
     */
    void exclusiveEditEnd(KTextEditor::Document *document);

  /*
   * Access to the mode/highlighting subsystem
   */
  public:
    /**
     * Return the name of the currently used mode
     * \return name of the used mode
     * \see modes(), setMode()
     */
    virtual QString mode() const = 0;

    /**
     * Return the name of the currently used mode
     * \return name of the used mode
     * \see highlightingModes(), setHighlightingMode()
     */
    virtual QString highlightingMode() const = 0;

    /**
     * Return a list of the names of all possible modes
     * \return list of mode names
     * \see mode(), setMode()
     */
    virtual QStringList modes() const = 0;

    /**
     * Return a list of the names of all possible modes
     * \return list of mode names
     * \see highlightingMode(), setHighlightingMode()
     */
    virtual QStringList highlightingModes() const = 0;

    /**
     * Set the current mode of the document by giving its name
     * \param name name of the mode to use for this document
     * \return \e true on success, otherwise \e false
     * \see mode(), modes(), modeChanged()
     */
    virtual bool setMode(const QString &name) = 0;

    /**
     * Set the current mode of the document by giving its name
     * \param name name of the mode to use for this document
     * \return \e true on success, otherwise \e false
     * \see highlightingMode(), highlightingModes(), highlightingModeChanged()
     */
    virtual bool setHighlightingMode(const QString &name) = 0;

    /**
     * Returns the name of the section for a highlight given its index in the highlight
     * list (as returned by highlightModes()).
     *
     * You can use this function to build a tree of the highlight names, organized in sections.
     *
     * \param index the index of the highlight in the list returned by modes()
     */
    virtual QString highlightingModeSection( int index ) const = 0;

    /**
     * Returns the name of the section for a mode given its index in the highlight
     * list (as returned by modes()).
     *
     * You can use this function to build a tree of the mode names, organized in sections.
     *
     * \param index the index of the highlight in the list returned by modes()
     */
    virtual QString modeSection( int index ) const = 0;

  /*
   * SIGNALS
   * Following signals should be emitted by the document if the mode
   * of the document changes
   */
  Q_SIGNALS:
    /**
     * Warn anyone listening that the current document's mode has
     * changed.
     *
     * \param document the document whose mode has changed
     * \see setMode()
     */
    void modeChanged(KTextEditor::Document *document);

    /**
     * Warn anyone listening that the current document's highlighting mode has
     * changed.
     *
     * \param document the document which's mode has changed
     * \see setHighlightingMode()
     */
    void highlightingModeChanged(KTextEditor::Document *document);

  private:
    class DocumentPrivate* const d;

  public:
    /**
     * by default dialogs should be displayed.
     * In any case (dialog shown or suppressed)
     * openingErrors and openingErrorMessage should have meaningfull values
     *
     * \param suppress true/false value if dialogs should be displayed
     */
    void setSuppressOpeningErrorDialogs(bool suppress);
    bool suppressOpeningErrorDialogs() const;
    /**
     * True, eg if the file for opening could not be read
     * This doesn't have to handle the KPart job cancled cases
     */
    bool openingError() const;
    QString openingErrorMessage() const;
    
    /**
     * since in kate part opening an non existend local file, doesn't cause an error anymore, a new
     * field for storing if the local document is an orphan is needed. In the remote case the opening error is still used
     */
    bool isOrphaned() const;
    void setOrphaned(bool value);

  protected:
    void setOpeningError(bool errors);
    void setOpeningErrorMessage(const QString& message);
};

}

Q_DECLARE_METATYPE(KTextEditor::Document*)

#endif

// kate: space-indent on; indent-width 2; replace-tabs on;