linux-firmware 1.127.24 / lib / firmware / qca / NOTICE.txt

This Notice.txt file contains certain notices of software components included
with the software that Qualcomm Atheros, Inc. ("Qualcomm Atheros") is required
to provide you. Notwithstanding anything in the notices in this file, your use
of these software components together with the Qualcomm Atheros software
(Qualcomm Atheros software hereinafter referred to as "Software") is subject to
the terms of your license from Qualcomm Atheros. Compliance with all copyright
laws and software license agreements included in the notice section of this
file are the responsibility of the user. Except as may be granted by separate
express written agreement, this file provides no license to any Qualcomm
Atheros patents, trademarks, copyrights, or other intellectual property.

Copyright (c) 2014 Qualcomm Atheros, Inc.  All rights reserved.

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries.  All Qualcomm Incorporated trademarks are used with
permission. Atheros is a trademark of Qualcomm Atheros, Inc., registered in the
United States and other countries.  Other products and brand names may be
trademarks or registered trademarks of their respective owners.

NOTICES:

===============================================================================

 1.

/*
 * FILE:    sha2.c
 * AUTHOR:    Aaron D. Gifford <me@aarongifford.com>
 *
 * Copyright (c) 2000-2001, Aaron D. Gifford
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holder nor the names of contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $Id: sha2.c,v 1.1 2001/11/08 00:01:51 adg Exp adg $
 */
File: LLM_sp_sha2.c


/*
 * FILE:    sha2.h
 * AUTHOR:    Aaron D. Gifford <me@aarongifford.com>
 *
 * Copyright (c) 2000-2001, Aaron D. Gifford
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holder nor the names of contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $Id: sha2.h,v 1.1 2001/11/08 00:02:01 adg Exp adg $
 */
File: LLM_sp_sha2.h

===============================================================================

 2.

/* utility to create the register check tables
* this includes inlined list.h safe for userspace.
*
* Copyright 2009 Jerome Glisse
* Copyright 2009 Red Hat Inc.
*
* Authors:
*    Jerome Glisse
*    Dave Airlie
*/
/*All rights reserved.
Redistribution and use in source and binary forms, with or without modification
are permitted provided that the following conditions are met:
  1. Redistributions of source code must retain the above copyright notice,
     this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice,
     this list of conditions and the following disclaimer in the documentation
     and/or other materials provided with the distribution.
  3. Neither the name of the <ORGANIZATION> nor the names of its contributors
     may be used to endorse or promote products derived from this software
     without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
File: comm_lib.h

===============================================================================

 3.

/* crypto/aes/aes.h -*- mode:C; c-file-style: "eay" -*- */
/* ====================================================================
 * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. All advertising materials mentioning features or use of this
 *    software must display the following acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
 *
 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    openssl-core@openssl.org.
 *
 * 5. Products derived from this software may not be called "OpenSSL"
 *    nor may "OpenSSL" appear in their names without prior written
 *    permission of the OpenSSL Project.
 *
 * 6. Redistributions of any form whatsoever must retain the following
 *    acknowledgment:
 *    "This product includes software developed by the OpenSSL Project
 *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
 *
 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 * ====================================================================
 *
 */
File Name list: aes.h, aes_locl.h

===============================================================================

 4.

/* crypto/aes/aes_core.c -*- mode:C; c-file-style: "eay" -*- */
/**
 * rijndael-alg-fst.c
 *
 * @version 3.0 (December 2000)
 *
 * Optimised ANSI C code for the Rijndael cipher (now AES)
 *
 * @author Vincent Rijmen <vincent.rijmen@esat.kuleuven.ac.be>
 * @author Antoon Bosselaers <antoon.bosselaers@esat.kuleuven.ac.be>
 * @author Paulo Barreto <paulo.barreto@terra.com.br>
 *
 * This code is hereby placed in the public domain.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
File: aes_core.c

===============================================================================

 5.

/*===========================================================================

                      EDIT HISTORY FOR FILE

  $Header: //depot/asic/msmshared/sec/sec/MSM_SEC.03.03.08.xx/aes.h#1 $
  $DateTime: 2006/12/11 00:43:21 $ $Author: davidf $

when       who     what, where, why
--------   ---     ----------------------------------------------------------
11/12/04   rv      changes to correct LINT errors
02/02/04   rwh     Small mods to open source.

===========================================================================*/

 /*
   I retain copyright in this code but I encourage its free use provided
   that I don't carry any responsibility for the results. I am especially
   happy to see it used in free and open source software. If you do use
   it I would appreciate an acknowledgement of its origin in the code or
   the product that results and I would also appreciate knowing a liitle
   about the use to which it is being put.

   Dr B. R. Gladman <brg@gladman.uk.net> 1st June 2001.

   This is an implementation of the AES encryption algorithm (Rijndael)
   designed by Joan Daemen and Vincent Rijmen. This version is designed
   to provide both fixed and dynamic block and key lengths and can also
   run with either big or little endian internal byte order.

   NOTE: Input block and key lengths are given in terms of the lengths of
   the byte arrays involved, the legal values being 16, 24 and 32.

   A. THE CIPHER INTERFACE

   byte                    (an unsigned 8-bit type)
   word                    (an unsigned 32-bit type)
   aes_ret:                (a signed 16 bit type for function return values)
        aes_good            (value != 0, a good return)
        aes_bad             (value == 0, an error return)
   enum aes_key:           (encryption direction)
        enc                 (set key for encryption)
        dec                 (set key for decryption)
        both                (set key for both)
   class or struct aes     (structure for context)

   C subroutine calls:

   aes_ret set_blk(const word block_length, aes *cx)  (variable block size)
   aes_ret set_key(const byte key[], const word key_length,
                   const enum aes_key direction, aes *cx)
   aes_ret encrypt(const byte input_blk[], byte output_blk[], const aes *cx)
   aes_ret decrypt(const byte input_blk[], byte output_blk[], const aes *cx)

   IMPORTANT NOTE: If you are using this C interface and your compiler does
   not set the memory used for objects to zero before use, you will need to
   ensure that cx.mode is set to zero before using the C subroutine calls.

   C++ aes class subroutines:

   aes_ret set_blk(const word block_length)  (variable block size)
   aes_ret set_key(const byte key[], const word key_length,
                   const aes_key direction)
   aes_ret encrypt(const byte input_blk[], byte output_blk[]) const
   aes_ret decrypt(const byte input_blk[], byte output_blk[]) const

   The block length inputs to set_block and set_key are in numbers of
   BYTES, not bits.  The calls to subroutines must be made in the above
   order but multiple calls can be made without repeating earlier calls
   if their parameters have not changed. If the cipher block length is
   variable but set_blk has not been called before cipher operations a
   value of 16 is assumed (that is, the AES block size). In contrast to
   earlier versions the block and key length parameters are now checked
   for correctness and the encryption and decryption routines check to
   ensure that an appropriate key has been set before they are called.

   B. BYTE ORDER WITHIN 32 BIT WORDS

   The fundamental data processing units in Rijndael are 8-bit bytes. The
   input, the output and the key input are all enumerated arrays of bytes
   in which bytes are numbered starting at zero and increasing to one less
   than the number of bytes in the array in question.  When these inputs
   and outputs are considered as bit sequences, the n'th byte contains
   bits 8n to 8n+7 of the sequence with the lower numbered bit mapped to
   the most significant bit within the  byte (i.e. that having a numeric
   value of 128).  However, Rijndael can be implemented more efficiently
   using 32-bit words to process 4 bytes at a time provided that the order
   of bytes within words is known.  This order is called big-endian if the
   lowest numbered bytes in words have the highest numeric significance
   and little-endian if the opposite applies. This code can work in either
   order irrespective of the native order of the machine on which it runs.
   The byte order used internally is set by defining INTERNAL_BYTE_ORDER
   whereas the order for all inputs and outputs is specified by defining
   EXTERNAL_BYTE_ORDER, the only purpose of the latter being to determine
   if a byte order change is needed immediately after input and immediately
   before output to account for the use of a different internal byte order.
   In almost all situations both of these defines will be set to the native
   order of the processor on which the code is to run but other settings
   may somtimes be useful in special circumstances.

#define INTERNAL_BYTE_ORDER LITTLE_ENDIAN
#define EXTERNAL_BYTE_ORDER LITTLE_ENDIAN

   C. COMPILATION

   To compile AES (Rijndael) for use in C code
    a. Exclude the AES_DLL define in aes.h
    b. Exclude the AES_IN_CPP define in aes.h

   To compile AES (Rijndael) for use in in C++ code
    a. Exclude the AES_DLL define in aes.h
    b. Include the AES_IN_CPP define in aes.h

   To compile AES (Rijndael) in C as a Dynamic Link Library
    a. Include the AES_DLL define in aes.h
    b. Compile the DLL.  If using the test files, exclude aes.c from
       the test build project and compile it with the same defines
       as used for the DLL (ensure that the DLL path is correct)

   D. CONFIGURATION OPTIONS (see also aes.c)

   1. define BLOCK_SIZE to set the cipher block size (16, 24 or 32) or
      leave this undefined for dynamically variable block size (this will
      result in much slower code).
   2. set AES_IN_CPP to use the code from C++ rather than C
   3. set AES_DLL if AES (Rijndael) is to be compiled to a DLL
   4. set INTERNAL_BYTE_ORDER to one of the above constants to set the
      internal byte order (the order used within the algorithm code)
   5. set EXTERNAL_BYTE_ORDER to one of the above constants to set the byte
      order used at the external interfaces for the input, output and key
      byte arrays.

   IMPORTANT NOTE: BLOCK_SIZE is in BYTES: 16, 24, 32 or undefined for aes.c
   and 16, 20, 24, 28, 32 or undefined for aes++.c.  If left undefined a
   slower version providing variable block length is compiled

#define BLOCK_SIZE  16

   Define AES_IN_CPP if you intend to use the AES C++ class rather than the
   C code directly.

#define AES_IN_CPP

   Define AES_DLL if you wish to compile the code to produce a Windows DLL

#define AES_DLL

*/
File: aes.h

/*===========================================================================

                      EDIT HISTORY FOR FILE

  $Header: //depot/asic/msmshared/sec/sec/MSM_SEC.03.03.08.xx/aes_tab.h#1 $
  $DateTime: 2006/12/11 00:43:21 $ $Author: davidf $

when       who     what, where, why
--------   ---     ----------------------------------------------------------
11/12/04   rv      changes to correct LINT errors
02/02/04   rwh     Small mods to open source.

===========================================================================*/
/*lint -e146 -e303 */
/* 146: Assuming a binary constant */
/* 303: String too long (try +macros) */


 /*
   I retain copyright in this code but I encourage its free use provided
   that I don't carry any responsibility for the results. I am especially
   happy to see it used in free and open source software. If you do use
   it I would appreciate an acknowledgement of its origin in the code or
   the product that results and I would also appreciate knowing a liitle
   about the use to which it is being put.

   Dr B. R. Gladman <brg@gladman.uk.net> 1st June 2001.
 */
File: aes_tab.h

===============================================================================
6.
===============================================================================
#FILE:Conftest.py
# Copyright (c) 2003 Stichting NLnet Labs
# Copyright (c) 2001, 2002, 2003 Steven Knight
#
# Permission is hereby granted, free of charge, to any person obtaining
# a copy of this software and associated documentation files (the
# "Software"), to deal in the Software without restriction, including
# without limitation the rights to use, copy, modify, merge, publish,
# distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so, subject to
# the following conditions:
#
# The above copyright notice and this permission notice shall be included
# in all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
# KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
# WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#

#
# The purpose of this module is to define how a check is to be performed.
# Use one of the Check...() functions below.
#

#
# A context class is used that defines functions for carrying out the tests,
# logging and messages.  The following methods and members must be present:
#
# context.Display(msg)  Function called to print messages that are normally
#                       displayed for the user.  Newlines are explicitly used.
#                       The text should also be written to the logfile!
#
# context.Log(msg)      Function called to write to a log file.
#
# context.BuildProg(text, ext)
#                       Function called to build a program, using "ext" for the
#                       file extention.  Must return an empty string for
#                       success, an error message for failure.
#                       For reliable test results building should be done just
#                       like an actual program would be build, using the same
#                       command and arguments (including configure results so
#                       far).
#
# context.CompileProg(text, ext)
#                       Function called to compile a program, using "ext" for
#                       the file extention.  Must return an empty string for
#                       success, an error message for failure.
#                       For reliable test results compiling should be done just
#                       like an actual source file would be compiled, using the
#                       same command and arguments (including configure results
#                       so far).
#
# context.AppendLIBS(lib_name_list)
#                       Append "lib_name_list" to the value of LIBS.
#                       "lib_namelist" is a list of strings.
#                       Return the value of LIBS before changing it (any type
#                       can be used, it is passed to SetLIBS() later.)
#
# context.PrependLIBS(lib_name_list)
#                       Prepend "lib_name_list" to the value of LIBS.
#                       "lib_namelist" is a list of strings.
#                       Return the value of LIBS before changing it (any type
#                       can be used, it is passed to SetLIBS() later.)
#
# context.SetLIBS(value)
#                       Set LIBS to "value".  The type of "value" is what
#                       AppendLIBS() returned.
#                       Return the value of LIBS before changing it (any type
#                       can be used, it is passed to SetLIBS() later.)
#
# context.headerfilename
#                       Name of file to append configure results to, usually
#                       "confdefs.h".
#                       The file must not exist or be empty when starting.
#                       Empty or None to skip this (some tests will not work!).
#
# context.config_h      (may be missing). If present, must be a string, which
#                       will be filled with the contents of a config_h file.
#
# context.vardict       Dictionary holding variables used for the tests and
#                       stores results from the tests, used for the build
#                       commands.
#                       Normally contains "CC", "LIBS", "CPPFLAGS", etc.
#
# context.havedict      Dictionary holding results from the tests that are to
#                       be used inside a program.
#                       Names often start with "HAVE_".  These are zero
#                       (feature not present) or one (feature present).  Other
#                       variables may have any value, e.g., "PERLVERSION" can
#
===============================================================================