libvtk5-dev 5.8.0-5 / usr / include / vtk-5.8 / vtkSimpleCellTessellator.h

/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkSimpleCellTessellator.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
// .NAME vtkSimpleCellTessellator - helper class to perform cell tessellation
// .SECTION Description
// vtkSimpleCellTessellator is a helper class to perform adaptive tessellation
// of particular cell topologies. The major purpose for this class is to
// transform higher-order cell types (e.g., higher-order finite elements)
// into linear cells that can then be easily visualized by VTK. This class
// works in conjunction with the vtkGenericDataSet and vtkGenericAdaptorCell
// classes.
//
// This algorithm is based on edge subdivision. An error metric along each
// edge is evaluated, and if the error is greater than some tolerance, the
// edge is subdivided (as well as all connected 2D and 3D cells). The process
// repeats until the error metric is satisfied. Since the algorithm is based
// on edge subdivision it inherently avoid T-junctions.
//
// A significant issue addressed by this algorithm is to insure face
// compatibility across neigboring cells. That is, diagonals due to face
// triangulation must match to insure that the mesh is compatible. The
// algorithm employs a precomputed table to accelerate the tessellation
// process. The table was generated with the help of vtkOrderedTriangulator
// the basic idea is that the choice of diagonal is made only by considering the
// relative value of the point ids.
//
// .SECTION See Also
// vtkGenericCellTessellator vtkGenericSubdivisionErrorMetric vtkAttributesErrorMetric 
// vtkGeometricErrorMetric vtkViewDependentErrorMetric

#ifndef __vtkSimpleCellTessellator_h
#define __vtkSimpleCellTessellator_h

#include "vtkGenericCellTessellator.h"

class vtkTriangleTile;
class vtkTetraTile;
class vtkCellArray;
class vtkDoubleArray;
class vtkGenericEdgeTable;
class vtkGenericSubdivisionErrorMetric;
class vtkGenericAttributeCollection;
class vtkGenericAdaptorCell;
class vtkGenericCellIterator;
class vtkPointData;
class vtkOrderedTriangulator;
class vtkPolygon;
class vtkIdList;

//-----------------------------------------------------------------------------
//
// The tessellation object
class VTK_FILTERING_EXPORT vtkSimpleCellTessellator : public vtkGenericCellTessellator
{
public:
  static vtkSimpleCellTessellator *New();
  vtkTypeMacro(vtkSimpleCellTessellator,vtkGenericCellTessellator);
  void PrintSelf(ostream& os, vtkIndent indent);

  // Description:
  // Get the higher order cell in order to access the evaluation function.
  vtkGetObjectMacro(GenericCell, vtkGenericAdaptorCell);

  // Description:
  // Tessellate a face of a 3D `cell'. The face is specified by the
  // index value.
  // The result is a set of smaller linear triangles in `cellArray' with
  // `points' and point data `internalPd'.
  // \pre cell_exists: cell!=0
  // \pre valid_dimension: cell->GetDimension()==3
  // \pre valid_index_range: (index>=0) && (index<cell->GetNumberOfBoundaries(2))
  // \pre att_exists: att!=0
  // \pre points_exists: points!=0
  // \pre cellArray_exists: cellArray!=0
  // \pre internalPd_exists: internalPd!=0
  void TessellateFace(vtkGenericAdaptorCell *cell,
                      vtkGenericAttributeCollection *att,
                      vtkIdType index,
                      vtkDoubleArray *points,
                      vtkCellArray *cellArray,
                      vtkPointData *internalPd);

  // Description:
  // Tessellate a 3D `cell'. The result is a set of smaller linear
  // tetrahedra in `cellArray' with `points' and point data `internalPd'.
  // \pre cell_exists: cell!=0
  // \pre valid_dimension: cell->GetDimension()==3
  // \pre att_exists: att!=0
  // \pre points_exists: points!=0
  // \pre cellArray_exists: cellArray!=0
  // \pre internalPd_exists: internalPd!=0
  void Tessellate(vtkGenericAdaptorCell *cell,
                  vtkGenericAttributeCollection *att,
                  vtkDoubleArray *points, 
                  vtkCellArray *cellArray,
                  vtkPointData *internalPd );

  // Description:
  // Triangulate a 2D `cell'. The result is a set of smaller linear triangles
  // in `cellArray' with `points' and point data `internalPd'.
  // \pre cell_exists: cell!=0
  // \pre valid_dimension: cell->GetDimension()==2
  // \pre att_exists: att!=0
  // \pre points_exists: points!=0
  // \pre cellArray_exists: cellArray!=0
  // \pre internalPd_exists: internalPd!=0
  void Triangulate(vtkGenericAdaptorCell *cell,
                   vtkGenericAttributeCollection *att,
                   vtkDoubleArray *points,
                   vtkCellArray *cellArray,
                   vtkPointData *internalPd);
  
  // Description:
  // Reset the output for repeated use of this class.
  void Reset();

 
  // Description:
  // Initialize the tessellator with a data set `ds'.
  void Initialize(vtkGenericDataSet *ds);
  
  // Description:
  // Return the number of fixed subdivisions. It is used to prevent from
  // infinite loop in degenerated cases. For order 3 or higher, if the
  // inflection point is exactly on the mid-point, error metric will not
  // detect that a subdivision is required. 0 means no fixed subdivision:
  // there will be only adaptive subdivisions.
  //
  // The algorithm first performs `GetFixedSubdivisions' non adaptive
  // subdivisions followed by at most `GetMaxAdaptiveSubdivisions' adaptive
  // subdivisions. Hence, there are at most `GetMaxSubdivisionLevel'
  // subdivisions.
  // \post positive_result: result>=0 && result<=GetMaxSubdivisionLevel()
  int GetFixedSubdivisions();
  
  // Description:
  // Return the maximum level of subdivision. It is used to prevent from
  // infinite loop in degenerated cases. For order 3 or higher, if the
  // inflection point is exactly on the mid-point, error metric will not
  // detect that a subdivision is required. 0 means no subdivision,
  // neither fixed nor adaptive.
  // \post positive_result: result>=GetFixedSubdivisions()
  int GetMaxSubdivisionLevel();
  
  // Description:
  // Return the maximum number of adaptive subdivisions.
  // \post valid_result: result==GetMaxSubdivisionLevel()-GetFixedSubdivisions()
  int GetMaxAdaptiveSubdivisions();
  
  // Description:
  // Set the number of fixed subdivisions. See GetFixedSubdivisions() for
  // more explanations.
  // \pre positive_level: level>=0 && level<=GetMaxSubdivisionLevel()
  // \post is_set: GetFixedSubdivisions()==level
  void SetFixedSubdivisions(int level);
  
  // Description:
  // Set the maximum level of subdivision. See GetMaxSubdivisionLevel() for
  // more explanations.
  // \pre positive_level: level>=GetFixedSubdivisions()
  // \post is_set: level==GetMaxSubdivisionLevel()
  void SetMaxSubdivisionLevel(int level);
  
  // Description:
  // Set both the number of fixed subdivisions and the maximum level of
  // subdivisions. See GetFixedSubdivisions(), GetMaxSubdivisionLevel() and
  // GetMaxAdaptiveSubdivisions() for more explanations.
  // \pre positive_fixed: fixed>=0
  // \pre valid_range: fixed<=maxLevel
  // \post fixed_is_set: fixed==GetFixedSubdivisions()
  // \post maxLevel_is_set: maxLevel==GetMaxSubdivisionLevel()
  void SetSubdivisionLevels(int fixed,
                            int maxLevel);
  
  
protected:
  vtkSimpleCellTessellator();
  ~vtkSimpleCellTessellator();
  
  // Description:
  // Extract point `pointId' from the edge table to the output point and output
  // point data.
  void CopyPoint(vtkIdType pointId);
  
  // Description:
  //HashTable instead of vtkPointLocator
  vtkGenericEdgeTable *EdgeTable;
  
  void InsertEdgesIntoEdgeTable( vtkTriangleTile &tri );
  void RemoveEdgesFromEdgeTable( vtkTriangleTile &tri );
  void InsertPointsIntoEdgeTable( vtkTriangleTile &tri );

  void InsertEdgesIntoEdgeTable( vtkTetraTile &tetra );
  void RemoveEdgesFromEdgeTable( vtkTetraTile &tetra );

  // Description:
  // Initialize `root' with the sub-tetra defined by the `localIds' points on
  // the complex cell, `ids' are the global ids over the mesh of those points.
  // The sub-tetra is also defined by the ids of its edges and of its faces
  // relative to the complex cell. -1 means that the edge or the face of the
  // sub-tetra is not an original edge or face of the complex cell.
  // \pre cell_exists: this->GenericCell!=0
  // \pre localIds_exists: localIds!=0
  // \pre localIds_size: sizeof(localIds)==4
  // \pre ids_exists: ids!=0
  // \pre ids_size: sizeof(ids)==4
  // \pre edgeIds_exists: edgeIds!=0
  // \pre edgeIds_size: sizeof(edgeIds)==6
  // \pre faceIds_exists: faceIds!=0
  // \pre faceIds_size: sizeof(faceIds)==4
  void InitTetraTile(vtkTetraTile &root,
                     vtkIdType *localIds,
                     vtkIdType *ids,
                     int *edgeIds,
                     int *faceIds);
  
  // Description:
  // Triangulate a triangle of `cell'. This triangle can be the top-level
  // triangle if the cell is a triangle or a toplevel sub-triangle is the cell
  // is a polygon, or a triangular face of a 3D cell or a top-level
  // sub-triangle of a face of a 3D cell if the face is not a triangle.
  // Arguments `localIds', `ids' and `edgeIds' have the same meaning than
  // for InitTetraTile.
  // \pre cell_exists: cell!=0
  // \pre localIds_exists: localIds!=0
  // \pre localIds_size: sizeof(localIds)==3
  // \pre ids_exists: ids!=0
  // \pre ids_size: sizeof(ids)==3
  // \pre edgeIds_exists: edgeIds!=0
  // \pre edgeIds_size: sizeof(edgeIds)==3
  void TriangulateTriangle(vtkGenericAdaptorCell *cell,
                           vtkIdType *localIds,
                           vtkIdType *ids,
                           int *edgeIds,
                           vtkGenericAttributeCollection *att,
                           vtkDoubleArray *points,
                           vtkCellArray *cellArray,
                           vtkPointData *internalPd);
  
  // Description:
  // To access the higher order cell from third party library
  vtkGenericAdaptorCell *GenericCell;

  // Description:
  // Allocate some memory if Scalars does not exists or is smaller than size.
  // \pre positive_size: size>0
  void AllocateScalars(int size);
  
  // Description:
  // Scalar buffer used to save the interpolate values of the attributes
  // The capacity is at least the number of components of the attribute
  // collection ot the current cell.
  
  // Scalar buffer that stores the global coordinates, parametric coordinates,
  // attributes at left, mid and right point. The format is:
  // lxlylz lrlslt [lalb lcldle...] mxmymz mrmsmt [mamb mcmdme...] 
  // rxryrz rrrsrt [rarb rcrdre...]
  // The ScalarsCapacity>=(6+attributeCollection->GetNumberOfComponents())*3
  
  double *Scalars;
  int ScalarsCapacity;
  
  // Description:
  // Number of double value to skip to go to the next point into Scalars array
  // It is 6+attributeCollection->GetNumberOfComponents()
  int PointOffset;
  
  // Description:
  // Used to iterate over edges boundaries in GetNumberOfCellsUsingEdges()
  vtkGenericCellIterator    *CellIterator;

  // Description:
  // To access the higher order field from third party library
  vtkGenericAttributeCollection *AttributeCollection;

  // Description:
  // To avoid New/Delete
  vtkDoubleArray     *TessellatePoints;  //Allow to use GetPointer
  vtkCellArray       *TessellateCellArray;
  vtkPointData *TessellatePointData;

  int FindEdgeReferenceCount(double p1[3], double p2[3], 
                             vtkIdType &e1, vtkIdType &e2);

  int GetNumberOfCellsUsingFace( int faceId );
  int GetNumberOfCellsUsingEdge( int edgeId );
  
  // Description:
  // Is the edge defined by vertices (`p1',`p2') in parametric coordinates on
  // some edge of the original tetrahedron? If yes return on which edge it is,
  // else return -1.
  // \pre p1!=p2
  // \pre p1 and p2 are in bounding box (0,0,0) (1,1,1)
  // \post valid_result: (result==-1) || ( result>=0 && result<=5 )
  int IsEdgeOnFace(double p1[3], double p2[3]);
  
  // Description:
  // Return 1 if the parent of edge defined by vertices (`p1',`p2') in
  // parametric coordinates, is an edge; 3 if there is no parent (the edge is
  // inside). If the parent is an edge, return its id in `localId'.
  // \pre p1!=p2
  // \pre p1 and p2 are in bounding box (0,0,0) (1,1,1)
  // \post valid_result: (result==1)||(result==3)
  int FindEdgeParent2D(double p1[3], double p2[3], int &localId);
  
  // Description:
  // Return 1 if the parent of edge defined by vertices (`p1',`p2') in
  // parametric coordinates, is an edge; 2 if the parent is a face, 3 if there
  // is no parent (the edge is inside). If the parent is an edge or a face,
  // return its id in `localId'.
  // \pre p1!=p2
  // \pre p1 and p2 are in bounding box (0,0,0) (1,1,1)
  // \post valid_result: result>=1 && result<=3
  int FindEdgeParent(double p1[3], double p2[3], int &localId);
  
  // Description:
  // Allocate some memory if PointIds does not exist or is smaller than size.
  // \pre positive_size: size>0
  void AllocatePointIds(int size);
  
  // Description:
  // Are the faces `originalFace' and `face' equal?
  // The result is independent from any order or orientation.
  // \pre originalFace_exists: originalFace!=0
  int FacesAreEqual(int *originalFace,
                    int face[3]);
  
  // Description:
  // Dataset to be tessellated.
  vtkGenericDataSet *DataSet;
  
  // Description:
  // Number of points in the dataset to be tessellated.
  vtkIdType NumberOfPoints;
  
  int FixedSubdivisions;
  int MaxSubdivisionLevel;
  int CurrentSubdivisionLevel;
  
  // Description:
  // For each edge (6) of the sub-tetra, there is the id of the original edge
  // or -1 if the edge is not an original edge
  int *EdgeIds;
  // Description:
  // For each face (4) of the sub-tetra, there is the id of the original face
  // or -1 if the face is not an original face
  int *FaceIds;
  
  // The following variables are for complex cells.
  
  // Used to create tetra from more complex cells, because the tessellator
  // is supposed to deal with simplices only.
  vtkOrderedTriangulator *Triangulator;
  
  // Used to store the sub-tetra during the tessellation of complex
  // cells.
  vtkCellArray *Connectivity;
  
  // Used to create triangles from a face of a complex cell.
  vtkPolygon *Polygon;
  
  // Used to store the sub-triangles during the tessellation of complex cells.
  vtkIdList *TriangleIds;
  
  vtkIdType *PointIds;
  int PointIdsCapacity;
  
private:
  vtkSimpleCellTessellator(const vtkSimpleCellTessellator&);  // Not implemented.
  void operator=(const vtkSimpleCellTessellator&);  // Not implemented.
  
  //BTX
  friend class vtkTetraTile;
  friend class vtkTriangleTile;
  //ETX
};

#endif