/usr/share/doc/libsane-extras/ls5000/README is in libsane-extras-common 1.0.22.2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 | ls5000 SANE backend
=====================
Author: Johannes Berg <johannes@sipsolutions.net>
Based on coolscan2.c from Andras Major.
This is the source code for a SANE backend for the Nikon LS-5000 ED
(Coolscan 5000 ED) scanner.
The LS-5000 is a 35mm film scanner capable of 4000dpi resolution and
16-bit colour depth.
The ls5000.c file is based on coolscan2.c from the SANE distribution.
I have heavily cleaned it up, modernized the code, made it worked with
the LS-5000 and added a few features. It should be possible to factor
in support for the other scanners again, but I have not made any attempt
at it yet since I do now own any such hardware.
The sanei* files were copied from the SANE distribution and slightly
modified for building outside of the SANE source.
Requirements
==============
* libusb development headers, libsane development headers
(libusb-dev/libsane-dev or similar)
* a not-too-shabby C compiler
Installation
==============
* add "ls5000" to /etc/sane/dll.conf (or, on Debian systems,
create /etc/sane/dll.d/ls5000 with just the string ls5000 in it)
* copy libsane-ls5000.so.1 to /usr/lib/sane/libsane-ls5000.so.1
Debugging
===========
The ls5000 backend, like most SANE backends, honours the SANE_DEBUG_LS5000
environment variable. There are various debug levels:
1: most obvious bugs
2 - 10: some information
20: command trace
|