/usr/include/capiutils.h is in libcapi20-dev 1:3.12.20071127-0ubuntu11.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 | #ifndef __CAPIUTILS_H__
#define __CAPIUTILS_H__
#include <sys/types.h>
#include <sys/time.h>
#include <time.h>
#include <capicmd.h>
#ifdef __cplusplus
extern "C" {
#endif
/*----- errornumbers -----*/
#define CapiToManyAppls 0x1001
#define CapiLogBlkSizeToSmall 0x1002
#define CapiBuffExeceeds64k 0x1003
#define CapiMsgBufSizeToSmall 0x1004
#define CapiAnzLogConnNotSupported 0x1005
#define CapiRegReserved 0x1006
#define CapiRegBusy 0x1007
#define CapiRegOSResourceErr 0x1008
#define CapiRegNotInstalled 0x1009
#define CapiRegCtrlerNotSupportExtEquip 0x100a
#define CapiRegCtrlerOnlySupportExtEquip 0x100b
#define CapiNoError 0x0000
#define CapiIllAppNr 0x1101
#define CapiIllCmdOrSubcmdOrMsgToSmall 0x1102
#define CapiSendQueueFull 0x1103
#define CapiReceiveQueueEmpty 0x1104
#define CapiReceiveOverflow 0x1105
#define CapiUnknownNotPar 0x1106
#define CapiMsgBusy 0x1107
#define CapiMsgOSResourceErr 0x1108
#define CapiMsgNotInstalled 0x1109
#define CapiMsgCtrlerNotSupportExtEquip 0x110a
#define CapiMsgCtrlerOnlySupportExtEquip 0x110b
/* standard CAPI2.0 function aliases */
#define CAPI20_REGISTER capi20_register
#define CAPI20_RELEASE capi20_release
#define CAPI20_PUT_MESSAGE capi20_put_message
#define CAPI20_GET_MESSAGE capi20_get_message
#define CAPI20_WaitforMessage capi20_waitformessage
#define CAPI20_GET_MANUFACTURER capi20_get_manufacturer
#define CAPI20_GET_VERSION capi20_get_version
#define CAPI20_GET_SERIAL_NUMBER capi20_get_serial_number
#define CAPI20_GET_PROFILE capi20_get_profile
#define CAPI20_ISINSTALLED capi20_isinstalled
#define CAPI_REGISTER_ERROR unsigned
#define MESSAGE_EXCHANGE_ERROR unsigned
typedef unsigned char *CAPI_MESSAGE;
#if defined(__GLIBC__) && defined(__GLIBC_MINOR__)
#if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || __GLIBC__ > 2
#define HAS_UINT8_T
#include <stdint.h>
#endif
#endif
#ifdef HAS_UINT8_T
typedef uint8_t _cbyte;
typedef uint16_t _cword;
typedef uint32_t _cdword;
typedef uint64_t _cqword;
#else
typedef unsigned char _cbyte;
typedef unsigned short _cword;
typedef unsigned long _cdword;
typedef unsigned long long _cqword;
#endif
typedef CAPI_MESSAGE _cstruct;
typedef enum { CAPI_COMPOSE = 0, CAPI_DEFAULT = 1 } _cmstruct;
/*----- CAPI commands -----*/
#define CAPI_ALERT 0x01
#define CAPI_CONNECT 0x02
#define CAPI_CONNECT_ACTIVE 0x03
#define CAPI_CONNECT_B3_ACTIVE 0x83
#define CAPI_CONNECT_B3 0x82
#define CAPI_CONNECT_B3_T90_ACTIVE 0x88
#define CAPI_DATA_B3 0x86
#define CAPI_DISCONNECT_B3 0x84
#define CAPI_DISCONNECT 0x04
#define CAPI_FACILITY 0x80
#define CAPI_INFO 0x08
#define CAPI_LISTEN 0x05
#define CAPI_MANUFACTURER 0xff
#define CAPI_RESET_B3 0x87
#define CAPI_SELECT_B_PROTOCOL 0x41
/*----- CAPI subcommands -----*/
#define CAPI_REQ 0x80
#define CAPI_CONF 0x81
#define CAPI_IND 0x82
#define CAPI_RESP 0x83
/*-----------------------------------------------------------------------*/
#define CAPIMSG_BASELEN 8
#define CAPIMSG_U8(m, off) (m[off])
#define CAPIMSG_U16(m, off) (m[off]|(m[(off)+1]<<8))
#define CAPIMSG_U32(m, off) (m[off]|(m[(off)+1]<<8)|(m[(off)+2]<<16)|(m[(off)+3]<<24))
#define CAPIMSG_U64(m, off) (((_cqword)CAPIMSG_U32(m, off))|(((_cqword)CAPIMSG_U32(m, off+4))<<32))
#define CAPIMSG_LEN(m) CAPIMSG_U16(m,0)
#define CAPIMSG_APPID(m) CAPIMSG_U16(m,2)
#define CAPIMSG_COMMAND(m) CAPIMSG_U8(m,4)
#define CAPIMSG_SUBCOMMAND(m) CAPIMSG_U8(m,5)
#define CAPIMSG_CMD(m) (((m[4])<<8)|(m[5]))
#define CAPIMSG_MSGID(m) CAPIMSG_U16(m,6)
#define CAPIMSG_CONTROLLER(m) (m[8] & 0x7f)
#define CAPIMSG_CONTROL(m) CAPIMSG_U32(m, 8)
#define CAPIMSG_NCCI(m) CAPIMSG_CONTROL(m)
#define CAPIMSG_DATALEN(m) CAPIMSG_U16(m,16) /* DATA_B3_REQ */
static inline void capimsg_setu8(void *m, int off, _cbyte val)
{
((_cbyte *)m)[off] = val;
}
static inline void capimsg_setu16(void *m, int off, _cword val)
{
((_cbyte *)m)[off] = val & 0xff;
((_cbyte *)m)[off+1] = (val >> 8) & 0xff;
}
static inline void capimsg_setu32(void *m, int off, _cdword val)
{
((_cbyte *)m)[off] = val & 0xff;
((_cbyte *)m)[off+1] = (val >> 8) & 0xff;
((_cbyte *)m)[off+2] = (val >> 16) & 0xff;
((_cbyte *)m)[off+3] = (val >> 24) & 0xff;
}
static inline void capimsg_setu64(void *m, int off, _cqword val)
{
((_cbyte *)m)[off] = val & 0xff;
((_cbyte *)m)[off+1] = (val >> 8) & 0xff;
((_cbyte *)m)[off+2] = (val >> 16) & 0xff;
((_cbyte *)m)[off+3] = (val >> 24) & 0xff;
((_cbyte *)m)[off+4] = (val >> 32) & 0xff;
((_cbyte *)m)[off+5] = (val >> 40) & 0xff;
((_cbyte *)m)[off+6] = (val >> 48) & 0xff;
((_cbyte *)m)[off+7] = (val >> 56) & 0xff;
}
#define CAPIMSG_SETLEN(m, len) capimsg_setu16(m, 0, len)
#define CAPIMSG_SETAPPID(m, applid) capimsg_setu16(m, 2, applid)
#define CAPIMSG_SETCOMMAND(m,cmd) capimsg_setu8(m, 4, cmd)
#define CAPIMSG_SETSUBCOMMAND(m, cmd) capimsg_setu8(m, 5, cmd)
#define CAPIMSG_SETMSGID(m, msgid) capimsg_setu16(m, 6, msgid)
#define CAPIMSG_SETCONTROL(m, contr) capimsg_setu32(m, 8, contr)
#define CAPIMSG_SETDATALEN(m, len) capimsg_setu16(m, 16, len)
/*
* The _cmsg structure contains all possible CAPI 2.0 parameter.
* All parameters are stored here first. The function capi_cmsg2message()
* assembles the parameter and builds CAPI2.0 conform messages.
* capi_message2cmsg disassembles CAPI 2.0 messages and stores the
* parameter in the _cmsg structure
*/
typedef struct {
/* Header */
_cword ApplId;
_cbyte Command;
_cbyte Subcommand;
_cword Messagenumber;
/* Parameter */
union {
_cdword adrController;
_cdword adrPLCI;
_cdword adrNCCI;
} adr;
_cmstruct AdditionalInfo;
_cstruct B1configuration;
_cword B1protocol;
_cstruct B2configuration;
_cword B2protocol;
_cstruct B3configuration;
_cword B3protocol;
_cstruct BC;
_cstruct BChannelinformation;
_cmstruct BProtocol;
_cstruct CalledPartyNumber;
_cstruct CalledPartySubaddress;
_cstruct CallingPartyNumber;
_cstruct CallingPartySubaddress;
_cdword CIPmask;
_cdword CIPmask2;
_cword CIPValue;
_cdword Class;
_cstruct ConnectedNumber;
_cstruct ConnectedSubaddress;
_cdword Data32;
_cqword Data64;
_cword DataHandle;
_cword DataLength;
_cstruct FacilityConfirmationParameter;
_cstruct Facilitydataarray;
_cstruct FacilityIndicationParameter;
_cstruct FacilityRequestParameter;
_cstruct FacilityResponseParameters;
_cword FacilitySelector;
_cword Flags;
_cdword Function;
#ifndef CAPI_LIBRARY_V2
_cstruct Globalconfiguration;
#endif
_cstruct HLC;
_cword Info;
_cstruct InfoElement;
_cdword InfoMask;
_cword InfoNumber;
_cstruct Keypadfacility;
_cstruct LLC;
_cstruct ManuData;
_cdword ManuID;
_cstruct NCPI;
_cword Reason;
_cword Reason_B3;
_cword Reject;
_cstruct Useruserdata;
#ifndef CAPI_LIBRARY_V2
_cstruct SendingComplete;
#endif
unsigned char *Data;
/* intern */
_cword l;
unsigned p;
unsigned char *par;
_cbyte *m;
/* buffer to construct message */
_cbyte buf[180];
} _cmsg;
/*
* capi_cmsg2message() assembles the parameter from _cmsg to a CAPI 2.0
* conform message
*/
#define capi20_cmsg2message capi_cmsg2message
unsigned capi_cmsg2message(_cmsg *cmsg, unsigned char *msg);
/*
* capi20_message2cmsg disassembles a CAPI message an writes the parameter
* into _cmsg for easy access
*/
#define capi20_message2cmsg capi_message2cmsg
unsigned capi_message2cmsg (_cmsg *cmsg, unsigned char *msg);
/*
* capi20_cmsg_header() fills the _cmsg structure with default values,
* so only parameter with non default values must be changed before
* sending the message.
*/
#define CAPI_CMSG_HEADER capi_cmsg_header
#define capi20_cmsg_header capi_cmsg_header
unsigned capi_cmsg_header (_cmsg *cmsg, unsigned _ApplId, _cbyte _Command, _cbyte _Subcommand, _cword _Messagenumber, _cdword _Controller);
/*
* capi_cmsg_answer() is used to answer indications. It changes the header
* of an indication to a response, and leaves all other parameters the same
*/
#define capi20_cmsg_answer capi_cmsg_answer
static inline void capi_cmsg_answer(_cmsg * cmsg)
{
cmsg->Subcommand |= 0x01;
}
/*
* capi_get_cmsg() works like capi20_get_message() and converts the
* CAPI message * to a _cmsg with capi_message2cmsg().
* Possible errors from capi20_get_message() will be returned.
*/
#define CAPI_GET_CMSG capi_get_cmsg
#define capi20_get_cmsg capi_get_cmsg
unsigned capi_get_cmsg(_cmsg *cmsg, unsigned applid);
/*
* capi_put_cmsg() works like capi20_put_message() but it converts the
* _cmsg * first with capi_cmsg2message(). Possible errors from
* capi_put_message() will be returned.
*/
#define CAPI_PUT_CMSG capi_put_cmsg
#define capi20_put_cmsg capi_put_cmsg
unsigned capi_put_cmsg(_cmsg *cmsg);
/*-----------------------------------------------------------------------*/
/*
* Debugging / Tracing functions
*/
/*
* capi_info2str generated a readable string for Capi2.0 reasons.
*/
#define capi20_info2str capi_info2str
char *capi_info2str(_cword reason);
#define capi20_cmd2str capi_cmd2str
char *capi_cmd2str(_cbyte cmd, _cbyte subcmd);
/*
* WARNING: The following two functions use a single static buffer and
* are not thread-safe.
*/
#define capi20_cmsg2str capi_cmsg2str
char *capi_cmsg2str(_cmsg * cmsg);
#define capi20_message2str capi_message2str
char *capi_message2str(_cbyte * msg);
/*-----------------------------------------------------------------------*/
#define ALERT_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define ALERT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional info elements */
#define ALERT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define ALERT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define ALERT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define ALERT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define ALERT_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define ALERT_CONF_INFO(x) ((x)->Info)
/* 0: alert initiated */
/* 0x0003: alert already sent by another application */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2007: illegal message parameter coding */
#define CONNECT_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define CONNECT_REQ_CIPVALUE(x) ((x)->CIPValue)
/* Compatibility Information Profile */
#define CONNECT_REQ_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
/* Called party number */
#define CONNECT_REQ_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
/* Calling party number */
#define CONNECT_REQ_CALLEDPARTYSUBADDRESS(x) ((x)->CalledPartySubaddress)
/* Called party subaddress */
#define CONNECT_REQ_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
/* Calling party subaddress */
#define CONNECT_REQ_BPROTOCOL(x) ((x)->BProtocol)
/* B protocol to be used */
#define CONNECT_REQ_B1PROTOCOL(x) ((x)->B1protocol)
/* Physical layer and framing */
#define CONNECT_REQ_B2PROTOCOL(x) ((x)->B2protocol)
/* Data link layer */
#define CONNECT_REQ_B3PROTOCOL(x) ((x)->B3protocol)
/* Network layer */
#define CONNECT_REQ_B1CONFIGURATION(x) ((x)->B1configuration)
/* Physical layer and framing parameter */
#define CONNECT_REQ_B2CONFIGURATION(x) ((x)->B2configuration)
/* Data link layer parameter */
#define CONNECT_REQ_B3CONFIGURATION(x) ((x)->B3configuration)
/* Network layer parameter */
#ifndef CAPI_LIBRARY_V2
#define CONNECT_REQ_GLOBALCONFIGURATION(x) ((x)->Globalconfiguration)
/* all layer parameter */
#endif
#define CONNECT_REQ_BC(x) ((x)->BC)
/* Bearer Capability */
#define CONNECT_REQ_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_REQ_HLC(x) ((x)->HLC)
/* High Layer Compatibility */
#define CONNECT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define CONNECT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define CONNECT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define CONNECT_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_CONF_INFO(x) ((x)->Info)
/* 0: connect initiated */
/* 0x2002: illegal controller */
/* 0x2003: out of PLCI */
/* 0x2007: illegal message parameter coding */
/* 0x3001: B1 protocol not supported */
/* 0x3002: B2 protocol not supported */
/* 0x3003: B3 protocol not supported */
/* 0x3004: B1 protocol parameter not supported */
/* 0x3005: B2 protocol parameter not supported */
/* 0x3006: B3 protocol parameter not supported */
/* 0x3007: B protocol combination not supported */
/* 0x300A: CIP Value unknown */
#define CONNECT_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_IND_CIPVALUE(x) ((x)->CIPValue)
/* Compatibility Information Profile */
#define CONNECT_IND_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
/* Called party number */
#define CONNECT_IND_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
/* Calling party number */
#define CONNECT_IND_CALLEDPARTYSUBADDRESS(x) ((x)->CalledPartySubaddress)
/* Called party subaddress */
#define CONNECT_IND_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
/* Calling party subaddress */
#define CONNECT_IND_BC(x) ((x)->BC)
/* Bearer compatibility */
#define CONNECT_IND_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_IND_HLC(x) ((x)->HLC)
/* High Layer Compatibility */
#define CONNECT_IND_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define CONNECT_IND_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define CONNECT_IND_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_IND_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_IND_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define CONNECT_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_RESP_REJECT(x) ((x)->Reject)
/* 0: accept call */
/* 1: ignore call */
/* 2: reject call, normal call clearing */
/* 3: reject call, user busy */
/* 4: reject call, requestet circuit/channel not available */
/* 5: reject call, facility rejected */
/* 6: reject call, channel unacceptable */
/* 7: reject call, incompatible destination */
/* 8: reject call, destination out of order */
#define CONNECT_RESP_BPROTOCOL(x) ((x)->BProtocol)
/* B protocol to be used */
#define CONNECT_RESP_B1PROTOCOL(x) ((x)->B1protocol)
/* Physical layer and framing */
#define CONNECT_RESP_B2PROTOCOL(x) ((x)->B2protocol)
/* Data link layer */
#define CONNECT_RESP_B3PROTOCOL(x) ((x)->B3protocol)
/* Network layer */
#define CONNECT_RESP_B1CONFIGURATION(x) ((x)->B1configuration)
/* Physical layer and framing parameter */
#define CONNECT_RESP_B2CONFIGURATION(x) ((x)->B2configuration)
/* Data link layer parameter */
#define CONNECT_RESP_B3CONFIGURATION(x) ((x)->B3configuration)
/* Network layer parameter */
#ifndef CAPI_LIBRARY_V2
#define CONNECT_RESP_GLOBALCONFIGURATION(x) ((x)->Globalconfiguration)
/* all layer parameter */
#endif
#define CONNECT_RESP_CONNECTEDNUMBER(x) ((x)->ConnectedNumber)
/* Connected number */
#define CONNECT_RESP_CONNECTEDSUBADDRESS(x) ((x)->ConnectedSubaddress)
/* Connected subaddress */
#define CONNECT_RESP_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_RESP_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define CONNECT_RESP_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define CONNECT_RESP_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_RESP_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define CONNECT_RESP_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define CONNECT_ACTIVE_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_ACTIVE_IND_CONNECTEDNUMBER(x) ((x)->ConnectedNumber)
/* Connected number */
#define CONNECT_ACTIVE_IND_CONNECTEDSUBADDRESS(x) ((x)->ConnectedSubaddress)
/* Connected subaddress */
#define CONNECT_ACTIVE_IND_LLC(x) ((x)->LLC)
/* Low Layer Compatibility */
#define CONNECT_ACTIVE_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_B3_ACTIVE_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_ACTIVE_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_ACTIVE_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define CONNECT_B3_REQ_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_CONF_INFO(x) ((x)->Info)
/* 0: connect initiated */
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2004: out of NCCI */
/* 0x3008: NCPI not supported */
#define CONNECT_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_RESP_REJECT(x) ((x)->Reject)
/* 0: accept call */
/* 2: reject call, normal call clearing */
#define CONNECT_B3_RESP_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_T90_ACTIVE_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define CONNECT_B3_T90_ACTIVE_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define CONNECT_B3_T90_ACTIVE_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_REQ_DATA(x) ((x)->Data)
/* Pointer to the data to be sent */
#define DATA_B3_REQ_DATALENGTH(x) ((x)->DataLength)
/* Size of data area to be sent */
#define DATA_B3_REQ_DATAHANDLE(x) ((x)->DataHandle)
/* Referenced in DATA_B3_CONF */
#define DATA_B3_REQ_FLAGS(x) ((x)->Flags)
/* [0]: qualifier bit */
/* [1]: more data bit */
/* [2]: delivery confirmation bit */
/* [3]: expedited data */
/* [4] to [15]: reserved */
#define DATA_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_CONF_DATAHANDLE(x) ((x)->DataHandle)
/* Identifies the data area of corresponding DATA_B3_REQ */
#define DATA_B3_CONF_INFO(x) ((x)->Info)
/* 0: data transmission initiated */
/* 0x0002: flags not supported by current protocol, flags ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x300A: flags not supported (reserved bits) */
/* 0x300C: data length not supported by current protocol */
#define DATA_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_IND_DATA(x) ((x)->Data)
/* Pointer to data received */
#define DATA_B3_IND_DATALENGTH(x) ((x)->DataLength)
/* Size of data area received */
#define DATA_B3_IND_DATAHANDLE(x) ((x)->DataHandle)
/* handle to data area, referenced in DATA_B3_RESP */
#define DATA_B3_IND_FLAGS(x) ((x)->Flags)
/* 0: qualifier bit */
/* 1: more-data bit */
/* 2: delivery confirmation bit */
/* 3: expedited data */
/* 4 to 14: reserved */
/* [15]: framing error bit, data may be invalid (only with corresponding B2 protocol) */
#define DATA_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DATA_B3_RESP_DATAHANDLE(x) ((x)->DataHandle)
/* Data area reference in corresponding DATA_B3_IND */
#define DISCONNECT_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_B3_REQ_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define DISCONNECT_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_B3_CONF_INFO(x) ((x)->Info)
/* 0: disconnect initiated */
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x3008: NCPI not supported */
#define DISCONNECT_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_B3_IND_REASON_B3(x) ((x)->Reason_B3)
/* 0: clearing according to protocol */
/* 0x3301: protocol error layer 1 */
/* 0x3302: protocol error layer 2 */
/* 0x3303: protocol error layer 3 */
/* protocol dependent values are described in chapter 6 */
#define DISCONNECT_B3_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define DISCONNECT_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define DISCONNECT_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define DISCONNECT_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define DISCONNECT_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define DISCONNECT_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define DISCONNECT_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define DISCONNECT_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define DISCONNECT_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define DISCONNECT_CONF_INFO(x) ((x)->Info)
/* 0: disconnect initiated */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2007: illegal message parameter coding */
#define DISCONNECT_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define DISCONNECT_IND_REASON(x) ((x)->Reason)
/* 0: no cause available */
/* 0x3301: protocol error layer 1 */
/* 0x3302: protocol error layer 2 */
/* 0x3303: protocol error layer 3 */
/* 0x3304: another application got that call */
/* 0x34xx: disconnect cause from the network according to Q.931/ETS 300 102-1. In the field 'xx' the cause value received within a cause information element (octet 4) from the network is indicated. */
#define DISCONNECT_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define FACILITY_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_REQ_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_REQ_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
#define FACILITY_REQ_FACILITYREQUESTPARAMETER(x) ((x)->FacilityRequestParameter)
/* Facility depending parameters */
#define FACILITY_CONF_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_CONF_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_CONF_INFO(x) ((x)->Info)
/* 0: request accepted */
/* 0x2001: message not supported in current state */
/* 0x2002: incorrect Controller/PLCI/NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x300B: facility not supported */
#define FACILITY_CONF_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
#define FACILITY_CONF_FACILITYCONFIRMATIONPARAMETER(x) ((x)->FacilityConfirmationParameter)
/* Facility-depending parameters */
#define FACILITY_IND_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_IND_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_IND_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
#define FACILITY_IND_FACILITYINDICATIONPARAMETER(x) ((x)->FacilityIndicationParameter)
/* Facility-depending parameters */
#define FACILITY_RESP_CONTROLLER(x) ((x)->adr.adrController)
#define FACILITY_RESP_PLCI(x) ((x)->adr.adrPLCI)
#define FACILITY_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Depending on the facility selector */
#define FACILITY_RESP_FACILITYSELECTOR(x) ((x)->FacilitySelector)
/* 0: Handset Support */
/* 1: DTMF */
/* 2 to n: reserved */
/* Facility response parameters */
/* struct */
/* Facility-depending parameters */
#define INFO_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define INFO_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* See note */
#define INFO_REQ_CALLEDPARTYNUMBER(x) ((x)->CalledPartyNumber)
/* Called party number */
#define INFO_REQ_ADDITIONALINFO(x) ((x)->AdditionalInfo)
/* Additional information elements */
#define INFO_REQ_BCHANNELINFORMATION(x) ((x)->BChannelinformation)
#define INFO_REQ_KEYPADFACILITY(x) ((x)->Keypadfacility)
/* coded according to ETS 300 102-1 / Q.931 */
#define INFO_REQ_USERUSERDATA(x) ((x)->Useruserdata)
/* coded according to ETS 300 102-1 / Q.931 */
#define INFO_REQ_FACILITYDATAARRAY(x) ((x)->Facilitydataarray)
/* which is used to transfer additional parameters coded */
/* according to ETS 300 102-1 / Q.931 starting from octet 1. */
/* This field is used to transport one or more complete facility */
/* data information elements. */
#define INFO_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define INFO_CONF_INFO(x) ((x)->Info)
/* 0: transmission of information initiated */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal Controller/PLCI */
/* 0x2003: out of PLCI */
/* 0x2007: illegal message parameter coding */
#define INFO_IND_CONTROLLER(x) ((x)->adr.adrController)
#define INFO_IND_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define INFO_IND_INFONUMBER(x) ((x)->InfoNumber)
/* Information element identifier */
#define INFO_IND_INFOELEMENT(x) ((x)->InfoElement)
/* Information element dependent structure */
#define INFO_RESP_CONTROLLER(x) ((x)->adr.adrController)
#define INFO_RESP_PLCI(x) ((x)->adr.adrPLCI)
/* As in INFO_IND */
#define LISTEN_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define LISTEN_REQ_INFOMASK(x) ((x)->InfoMask)
/* Bit field, coding as follows: */
/* 0: cause */
/* 1: date/Time */
/* 2: display */
/* 3: user-user information */
/* 4: call progression */
/* 5: facility */
/* 6: charging */
/* 7 to 31: reserved */
#define LISTEN_REQ_CIPMASK(x) ((x)->CIPmask)
/* Bit field, coding as follows: */
/* 0: any match */
/* 1: speech */
/* 2: unrestricted digital information */
/* 3: restricted digital information */
/* 4: 3.1 kHz audio */
/* 5: 7.0 kHz audio */
/* 6: video */
/* 7: packet mode */
/* 8: 56 kBit/s rate adaptation */
/* 9: unrestricted digital information with tones/announcements */
/* 10..15: reserved */
/* 16: telephony */
/* 17: fax group 2/3 */
/* 18: fax group 4 class 1 */
/* 19: Teletex service (basic and mixed), fax group 4 class 2 */
/* 20: Teletex service (basic and processable) */
/* 21: Teletex service (basic) */
/* 22: Videotex */
/* 23: Telex */
/* reserved for additional services */
/* 25: OSI applications according X.200 */
/* 26: 7 kHz Telephony */
/* 27: Video Telephony F.721, first connection */
/* 28: Video Telephony F.721, second connection */
/* 29 to 31: reserved */
#define LISTEN_REQ_CIPMASK2(x) ((x)->CIPmask2)
/* reserved for additional services */
#define LISTEN_REQ_CALLINGPARTYNUMBER(x) ((x)->CallingPartyNumber)
/* Calling party number */
#define LISTEN_REQ_CALLINGPARTYSUBADDRESS(x) ((x)->CallingPartySubaddress)
/* Calling party subaddress */
#define LISTEN_CONF_CONTROLLER(x) ((x)->adr.adrController)
#define LISTEN_CONF_INFO(x) ((x)->Info)
/* 0: listen is active */
/* 0x2002: illegal controller */
/* 0x2005: out of LISTEN-Resources */
/* 0x2007: illegal message parameter coding */
#define MANUFACTURER_REQ_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_REQ_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_REQ_CLASS(x) ((x)->Class)
#define MANUFACTURER_REQ_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_REQ_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define MANUFACTURER_CONF_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_CONF_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_CONF_CLASS(x) ((x)->Class)
#define MANUFACTURER_CONF_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_CONF_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define MANUFACTURER_IND_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_IND_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_IND_CLASS(x) ((x)->Class)
#define MANUFACTURER_IND_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_IND_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define MANUFACTURER_RESP_CONTROLLER(x) ((x)->adr.adrController)
#define MANUFACTURER_RESP_MANUID(x) ((x)->ManuID)
/* Manufacturer specific ID (should be unique) */
/* Manufacturer specific */
#define MANUFACTURER_RESP_CLASS(x) ((x)->Class)
#define MANUFACTURER_RESP_FUNCTION(x) ((x)->Function)
#define MANUFACTURER_RESP_MANUDATA(x) ((x)->ManuData)
/* Manufacturer specific data */
#define RESET_B3_REQ_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define RESET_B3_REQ_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define RESET_B3_CONF_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define RESET_B3_CONF_INFO(x) ((x)->Info)
/* 0: reset initiated */
/* 0x0001: NCPI not supported by current protocol, NCPI ignored */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal NCCI */
/* 0x2007: illegal message parameter coding */
/* 0x3008: NCPI not supported */
/* 0x300D: reset procedure not supported by current protocol */
#define RESET_B3_IND_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define RESET_B3_IND_NCPI(x) ((x)->NCPI)
/* Network Control Protocol Information */
#define RESET_B3_RESP_NCCI(x) ((x)->adr.adrNCCI)
/* Network Control Connection Identifier */
#define SELECT_B_PROTOCOL_REQ_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define SELECT_B_PROTOCOL_REQ_BPROTOCOL(x) ((x)->BProtocol)
/* Protocol definition */
#define SELECT_B_PROTOCOL_REQ_B1PROTOCOL(x) ((x)->B1protocol)
/* Physical layer and framing */
#define SELECT_B_PROTOCOL_REQ_B2PROTOCOL(x) ((x)->B2protocol)
/* Data link layer */
#define SELECT_B_PROTOCOL_REQ_B3PROTOCOL(x) ((x)->B3protocol)
/* Network layer */
#define SELECT_B_PROTOCOL_REQ_B1CONFIGURATION(x) ((x)->B1configuration)
/* Physical layer and framing parameter */
#define SELECT_B_PROTOCOL_REQ_B2CONFIGURATION(x) ((x)->B2configuration)
/* Data link layer parameter */
#define SELECT_B_PROTOCOL_REQ_B3CONFIGURATION(x) ((x)->B3configuration)
/* Network layer parameter */
#ifndef CAPI_LIBRARY_V2
#define SELECT_B_PROTOCOL_REQ_GLOBALCONFIGURATION(x) ((x)->Globalconfiguration)
/* all layer parameter */
#endif
#define SELECT_B_PROTOCOL_CONF_PLCI(x) ((x)->adr.adrPLCI)
/* Physical Link Connection Identifier */
#define SELECT_B_PROTOCOL_CONF_INFO(x) ((x)->Info)
/* 0: protocol switch successful */
/* 0x2001: message not supported in current state */
/* 0x2002: illegal PLCI */
/* 0x2007: illegal message parameter coding */
/* 0x3001: B1 protocol not supported */
/* 0x3002: B2 protocol not supported */
/* 0x3003: B3 protocol not supported */
/* 0x3004: B1 protocol parameter not supported */
/* 0x3005: B2 protocol parameter not supported */
/* 0x3006: B3 protocol parameter not supported */
/* 0x3007: B protocol combination not supported */
/*----- tests for specific commands -----*/
#define IS_CONNECT_IND(m) ((m)->Command==0x02 && (m)->Subcommand==0x82)
#define IS_CONNECT_ACTIVE_IND(m) ((m)->Command==0x03 && (m)->Subcommand==0x82)
#define IS_CONNECT_B3_ACTIVE_IND(m) ((m)->Command==0x83 && (m)->Subcommand==0x82)
#define IS_CONNECT_B3_IND(m) ((m)->Command==0x82 && (m)->Subcommand==0x82)
#define IS_CONNECT_B3_T90_ACTIVE_IND(m) ((m)->Command==0x88 && (m)->Subcommand==0x82)
#define IS_DATA_B3_IND(m) ((m)->Command==0x86 && (m)->Subcommand==0x82)
#define IS_DISCONNECT_B3_IND(m) ((m)->Command==0x84 && (m)->Subcommand==0x82)
#define IS_DISCONNECT_IND(m) ((m)->Command==0x04 && (m)->Subcommand==0x82)
#define IS_FACILITY_IND(m) ((m)->Command==0x80 && (m)->Subcommand==0x82)
#define IS_INFO_IND(m) ((m)->Command==0x08 && (m)->Subcommand==0x82)
#define IS_MANUFACTURER_IND(m) ((m)->Command==0xff && (m)->Subcommand==0x82)
#define IS_RESET_B3_IND(m) ((m)->Command==0x87 && (m)->Subcommand==0x82)
#define IS_ALERT_CONF(m) ((m)->Command==0x01 && (m)->Subcommand==0x81)
#define IS_CONNECT_CONF(m) ((m)->Command==0x02 && (m)->Subcommand==0x81)
#define IS_CONNECT_B3_CONF(m) ((m)->Command==0x82 && (m)->Subcommand==0x81)
#define IS_DATA_B3_CONF(m) ((m)->Command==0x86 && (m)->Subcommand==0x81)
#define IS_DISCONNECT_B3_CONF(m) ((m)->Command==0x84 && (m)->Subcommand==0x81)
#define IS_DISCONNECT_CONF(m) ((m)->Command==0x04 && (m)->Subcommand==0x81)
#define IS_FACILITY_CONF(m) ((m)->Command==0x80 && (m)->Subcommand==0x81)
#define IS_INFO_CONF(m) ((m)->Command==0x08 && (m)->Subcommand==0x81)
#define IS_LISTEN_CONF(m) ((m)->Command==0x05 && (m)->Subcommand==0x81)
#define IS_MANUFACTURER_CONF(m) ((m)->Command==0xff && (m)->Subcommand==0x81)
#define IS_RESET_B3_CONF(m) ((m)->Command==0x87 && (m)->Subcommand==0x81)
#define IS_SELECT_B_PROTOCOL_CONF(m) ((m)->Command==0x41 && (m)->Subcommand==0x81)
/*----- header functions that fill the _cmsg structure with default -----*/
/*----- values. Only nonstandard parameter need to be changed -----*/
#define ALERT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x01,0x80,Messagenumber,adr)
#define CONNECT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x02,0x80,Messagenumber,adr)
#define CONNECT_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x82,0x80,Messagenumber,adr)
#define DATA_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x86,0x80,Messagenumber,adr)
#define DISCONNECT_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x84,0x80,Messagenumber,adr)
#define DISCONNECT_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x04,0x80,Messagenumber,adr)
#define FACILITY_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x80,0x80,Messagenumber,adr)
#define INFO_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x08,0x80,Messagenumber,adr)
#define LISTEN_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x05,0x80,Messagenumber,adr)
#define MANUFACTURER_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0xff,0x80,Messagenumber,adr)
#define RESET_B3_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x87,0x80,Messagenumber,adr)
#define SELECT_B_PROTOCOL_REQ_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x41,0x80,Messagenumber,adr)
#define CONNECT_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x02,0x83,Messagenumber,adr)
#define CONNECT_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x03,0x83,Messagenumber,adr)
#define CONNECT_B3_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x83,0x83,Messagenumber,adr)
#define CONNECT_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x82,0x83,Messagenumber,adr)
#define CONNECT_B3_T90_ACTIVE_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x88,0x83,Messagenumber,adr)
#define DATA_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x86,0x83,Messagenumber,adr)
#define DISCONNECT_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x84,0x83,Messagenumber,adr)
#define DISCONNECT_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x04,0x83,Messagenumber,adr)
#define FACILITY_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x80,0x83,Messagenumber,adr)
#define INFO_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x08,0x83,Messagenumber,adr)
#define MANUFACTURER_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0xff,0x83,Messagenumber,adr)
#define RESET_B3_RESP_HEADER(cmsg,ApplId,Messagenumber,adr) \
CAPI_CMSG_HEADER(cmsg,ApplId,0x87,0x83,Messagenumber,adr)
/*
* CAPI-functions that correspond to the CAPI messages specified in the
* CAPI 2.0 specification. All possible parameter have to be specified.
* The CAPI message is sent immediately when calling these functions,
* return values are the same as in capi_put_message()
*/
unsigned ALERT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarra
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
);
unsigned CONNECT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword CIPValue
,_cstruct CalledPartyNumber
,_cstruct CallingPartyNumber
,_cstruct CalledPartySubaddress
,_cstruct CallingPartySubaddress
,_cword B1protocol
,_cword B2protocol
,_cword B3protocol
,_cstruct B1configuration
,_cstruct B2configuration
,_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
,_cstruct BC
,_cstruct LLC
,_cstruct HLC
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
);
unsigned CONNECT_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct NCPI);
unsigned DATA_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,void * Data
,_cword DataLength
,_cword DataHandle
,_cword Flags);
unsigned DISCONNECT_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct NCPI);
unsigned DISCONNECT_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray);
unsigned FACILITY_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword FacilitySelector
,_cstruct FacilityRequestParameter);
unsigned INFO_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct CalledPartyNumber
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
);
unsigned LISTEN_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cdword InfoMask
,_cdword CIPmask
,_cdword CIPmask2
,_cstruct CallingPartyNumber
,_cstruct CallingPartySubaddress);
unsigned MANUFACTURER_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cdword ManuID
,_cdword Class
,_cdword Function
,_cstruct ManuData);
unsigned RESET_B3_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cstruct NCPI);
unsigned SELECT_B_PROTOCOL_REQ (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword B1protocol
,_cword B2protocol
,_cword B3protocol
,_cstruct B1configuration
,_cstruct B2configuration
,_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
);
unsigned CONNECT_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword Reject
,_cword B1protocol
,_cword B2protocol
,_cword B3protocol
,_cstruct B1configuration
,_cstruct B2configuration
,_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
,_cstruct ConnectedNumber
,_cstruct ConnectedSubaddress
,_cstruct LLC
,_cstruct BChannelinformation
,_cstruct Keypadfacility
,_cstruct Useruserdata
,_cstruct Facilitydataarray);
unsigned CONNECT_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned CONNECT_B3_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned CONNECT_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword Reject
,_cstruct NCPI);
unsigned CONNECT_B3_T90_ACTIVE_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned DATA_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword DataHandle);
unsigned DISCONNECT_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned DISCONNECT_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned FACILITY_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cword FacilitySelector
,_cstruct FacilityResponseParameters);
unsigned INFO_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
unsigned MANUFACTURER_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr
,_cdword ManuID
,_cdword Class
,_cdword Function
,_cstruct ManuData);
unsigned RESET_B3_RESP (_cmsg *cmsg, _cword ApplId, _cword Messagenumber
,_cdword adr);
/*-----------------------------------------------------------------------*/
static inline void capi_fill_CONNECT_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x82, 0x80, Messagenumber, adr);
cmsg->NCPI = NCPI;
}
static inline void capi_fill_FACILITY_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword FacilitySelector,
_cstruct FacilityRequestParameter)
{
capi_cmsg_header(cmsg, ApplId, 0x80, 0x80, Messagenumber, adr);
cmsg->FacilitySelector = FacilitySelector;
cmsg->FacilityRequestParameter = FacilityRequestParameter;
}
static inline void capi_fill_INFO_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct CalledPartyNumber,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x08, 0x80, Messagenumber, adr);
cmsg->CalledPartyNumber = CalledPartyNumber;
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = SendingComplete;
#endif
}
static inline void capi_fill_LISTEN_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cdword InfoMask,
_cdword CIPmask,
_cdword CIPmask2,
_cstruct CallingPartyNumber,
_cstruct CallingPartySubaddress)
{
capi_cmsg_header(cmsg, ApplId, 0x05, 0x80, Messagenumber, adr);
cmsg->InfoMask = InfoMask;
cmsg->CIPmask = CIPmask;
cmsg->CIPmask2 = CIPmask2;
cmsg->CallingPartyNumber = CallingPartyNumber;
cmsg->CallingPartySubaddress = CallingPartySubaddress;
}
static inline void capi_fill_ALERT_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x01, 0x80, Messagenumber, adr);
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = SendingComplete;
#endif
}
static inline void capi_fill_CONNECT_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword CIPValue,
_cstruct CalledPartyNumber,
_cstruct CallingPartyNumber,
_cstruct CalledPartySubaddress,
_cstruct CallingPartySubaddress,
_cword B1protocol,
_cword B2protocol,
_cword B3protocol,
_cstruct B1configuration,
_cstruct B2configuration,
_cstruct B3configuration,
#ifndef CAPI_LIBRARY_V2
_cstruct Globalconfiguration,
#endif
_cstruct BC,
_cstruct LLC,
_cstruct HLC,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray
#ifndef CAPI_LIBRARY_V2
,_cstruct SendingComplete
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x02, 0x80, Messagenumber, adr);
cmsg->CIPValue = CIPValue;
cmsg->CalledPartyNumber = CalledPartyNumber;
cmsg->CallingPartyNumber = CallingPartyNumber;
cmsg->CalledPartySubaddress = CalledPartySubaddress;
cmsg->CallingPartySubaddress = CallingPartySubaddress;
cmsg->B1protocol = B1protocol;
cmsg->B2protocol = B2protocol;
cmsg->B3protocol = B3protocol;
cmsg->B1configuration = B1configuration;
cmsg->B2configuration = B2configuration;
cmsg->B3configuration = B3configuration;
#ifndef CAPI_LIBRARY_V2
cmsg->Globalconfiguration = Globalconfiguration;
#endif
cmsg->BC = BC;
cmsg->LLC = LLC;
cmsg->HLC = HLC;
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = SendingComplete;
#endif
}
static inline void capi_fill_DATA_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
unsigned char *Data,
_cword DataLength,
_cword DataHandle,
_cword Flags)
{
capi_cmsg_header(cmsg, ApplId, 0x86, 0x80, Messagenumber, adr);
cmsg->Data = Data;
cmsg->DataLength = DataLength;
cmsg->DataHandle = DataHandle;
cmsg->Flags = Flags;
}
static inline void capi_fill_DISCONNECT_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray)
{
capi_cmsg_header(cmsg, ApplId, 0x04, 0x80, Messagenumber, adr);
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
#ifndef CAPI_LIBRARY_V2
cmsg->SendingComplete = NULL;
#endif
}
static inline void capi_fill_DISCONNECT_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x84, 0x80, Messagenumber, adr);
cmsg->NCPI = NCPI;
}
static inline void capi_fill_MANUFACTURER_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cdword ManuID,
_cdword Class,
_cdword Function,
_cstruct ManuData)
{
capi_cmsg_header(cmsg, ApplId, 0xff, 0x80, Messagenumber, adr);
cmsg->ManuID = ManuID;
cmsg->Class = Class;
cmsg->Function = Function;
cmsg->ManuData = ManuData;
}
static inline void capi_fill_RESET_B3_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x87, 0x80, Messagenumber, adr);
cmsg->NCPI = NCPI;
}
static inline void capi_fill_SELECT_B_PROTOCOL_REQ(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword B1protocol,
_cword B2protocol,
_cword B3protocol,
_cstruct B1configuration,
_cstruct B2configuration,
_cstruct B3configuration
#ifndef CAPI_LIBRARY_V2
,_cstruct Globalconfiguration
#endif
)
{
capi_cmsg_header(cmsg, ApplId, 0x41, 0x80, Messagenumber, adr);
cmsg->B1protocol = B1protocol;
cmsg->B2protocol = B2protocol;
cmsg->B3protocol = B3protocol;
cmsg->B1configuration = B1configuration;
cmsg->B2configuration = B2configuration;
cmsg->B3configuration = B3configuration;
#ifndef CAPI_LIBRARY_V2
cmsg->Globalconfiguration = Globalconfiguration;
#endif
}
static inline void capi_fill_CONNECT_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword Reject,
_cword B1protocol,
_cword B2protocol,
_cword B3protocol,
_cstruct B1configuration,
_cstruct B2configuration,
_cstruct B3configuration,
#ifndef CAPI_LIBRARY_V2
_cstruct Globalconfiguration,
#endif
_cstruct ConnectedNumber,
_cstruct ConnectedSubaddress,
_cstruct LLC,
_cstruct BChannelinformation,
_cstruct Keypadfacility,
_cstruct Useruserdata,
_cstruct Facilitydataarray)
{
capi_cmsg_header(cmsg, ApplId, 0x02, 0x83, Messagenumber, adr);
cmsg->Reject = Reject;
cmsg->B1protocol = B1protocol;
cmsg->B2protocol = B2protocol;
cmsg->B3protocol = B3protocol;
cmsg->B1configuration = B1configuration;
cmsg->B2configuration = B2configuration;
cmsg->B3configuration = B3configuration;
#ifndef CAPI_LIBRARY_V2
cmsg->Globalconfiguration = Globalconfiguration;
#endif
cmsg->ConnectedNumber = ConnectedNumber;
cmsg->ConnectedSubaddress = ConnectedSubaddress;
cmsg->LLC = LLC;
cmsg->BChannelinformation = BChannelinformation;
cmsg->Keypadfacility = Keypadfacility;
cmsg->Useruserdata = Useruserdata;
cmsg->Facilitydataarray = Facilitydataarray;
}
static inline void capi_fill_CONNECT_ACTIVE_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x03, 0x83, Messagenumber, adr);
}
static inline void capi_fill_CONNECT_B3_ACTIVE_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x83, 0x83, Messagenumber, adr);
}
static inline void capi_fill_CONNECT_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword Reject,
_cstruct NCPI)
{
capi_cmsg_header(cmsg, ApplId, 0x82, 0x83, Messagenumber, adr);
cmsg->Reject = Reject;
cmsg->NCPI = NCPI;
}
static inline void capi_fill_CONNECT_B3_T90_ACTIVE_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x88, 0x83, Messagenumber, adr);
}
static inline void capi_fill_DATA_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword DataHandle)
{
capi_cmsg_header(cmsg, ApplId, 0x86, 0x83, Messagenumber, adr);
cmsg->DataHandle = DataHandle;
}
static inline void capi_fill_DISCONNECT_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x84, 0x83, Messagenumber, adr);
}
static inline void capi_fill_DISCONNECT_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x04, 0x83, Messagenumber, adr);
}
static inline void capi_fill_FACILITY_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cword FacilitySelector)
{
capi_cmsg_header(cmsg, ApplId, 0x80, 0x83, Messagenumber, adr);
cmsg->FacilitySelector = FacilitySelector;
}
static inline void capi_fill_INFO_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x08, 0x83, Messagenumber, adr);
}
static inline void capi_fill_MANUFACTURER_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr,
_cdword ManuID,
_cdword Class,
_cdword Function,
_cstruct ManuData)
{
capi_cmsg_header(cmsg, ApplId, 0xff, 0x83, Messagenumber, adr);
cmsg->ManuID = ManuID;
cmsg->Class = Class;
cmsg->Function = Function;
cmsg->ManuData = ManuData;
}
static inline void capi_fill_RESET_B3_RESP(_cmsg * cmsg, _cword ApplId, _cword Messagenumber,
_cdword adr)
{
capi_cmsg_header(cmsg, ApplId, 0x87, 0x83, Messagenumber, adr);
}
#ifdef __cplusplus
}
#endif
#endif /* __CAPIUTILS_H__ */
|