cvsd 1.0.22 / postinst

#!/bin/sh

set -e

# source debconf library.
. /usr/share/debconf/confmodule

# location of the configfile
configfile="/etc/cvsd/cvsd.conf"

# location of the file that will be edited
# only when editing is complete will $configfile be overwritten
tmpconfigfile=`mktemp`

# location of the file that will be used temporarily
tmpfile=`mktemp`

# create cvsd group if it's not there yet
getent group cvsd >/dev/null || \
  addgroup --system cvsd

# create cvsd user if it's not there yet
getent passwd cvsd >/dev/null || \
  adduser --system --ingroup cvsd --home /var/lib/cvsd cvsd

# correct settings for cvsd user
(getent passwd cvsd | grep -q "^cvsd:.*:cvs pserver daemon:") || usermod -c "cvs pserver daemon" cvsd
gid=`getent group cvsd | sed 's/^cvsd:[^:]*:\([0-9]*\):.*$/\1/'`
(getent passwd cvsd | grep -q "^cvsd:.*:$gid:") || usermod -g "cvsd" cvsd
(getent passwd cvsd | grep -q ":/bin/false$") || usermod -s "/bin/false" cvsd

# sed expressions to escape character so vars may be used in regexps
RE_ESCAPE="s/[\\\\\/.+*()\[^$]/\\\\&/g"
RP_ESCAPE="s/[\\\\\/&]/\\\\&/g"

# function to do modification of an option
# modifications are to $tmpconfigfile
thingamagiggy () {
  setting="$1"
  value="$2"
  value_re=`echo "$value" | sed "$RE_ESCAPE"`
  value_rp=`echo "$value" | sed "$RP_ESCAPE"`
  # if config already contains this setting we're done
  grep \
    '^[[:space:]]*'"$setting"'[[:space:]][[:space:]]*'"$value_re"'[[:space:]]*$' \
    < "$tmpconfigfile" > /dev/null 2>&1 \
    && return 0
  # check if a setting should be modified or added
  if grep \
       '^[[:space:]]*'"$setting"'[[:space:]][[:space:]]*[^[:space:]]*[[:space:]]*$' \
       < "$tmpconfigfile" > /dev/null 2>&1
  then
    # setting is present with another value, modify
    sed \
      's/^\([[:space:]]*'"$setting"'[[:space:]][[:space:]]*\)[^[:space:]]*\([[:space:]]*\)$/\1'"$value_rp"'\2/' \
      < "$tmpconfigfile" > "$tmpfile"
    cat "$tmpfile" > "$tmpconfigfile"
  else
    # setting is not yet present, add
    echo "$setting $value" >> "$tmpconfigfile"
  fi
}

# install a new configfile if there is no existing one or if it
# is an old generated one, otherwise modify current configfile
if ! [ -e "$configfile" ]
then
  # create a new configuration file
  cat > "$tmpconfigfile" << EOM
# This is the configuration file for cvsd.
# See the manual page cvsd.conf(5) for more information.
#
# You can also use 'dpkg-reconfigure cvsd' to modify these
# settings.
#
# See the "Password authentication server"
# section in the cvs texinfo for more information
# about running a pserver.

# RootJail <path>
#  This is the location of the chroot jail
#  cvs should be run in.
#  Specify 'none' (without quotes) to not use
#  a chroot jail.
#  This directory should be initialized with
#  the cvsd-buildroot script.
RootJail /var/lib/cvsd

# Uid <uid>
#  This specifies which user id cvs should be
#  run as. This can be a numerical id or
#  a symbolic value.
Uid cvsd

# Gid <gid>
#  This specifies which group id cvs should be
#  run as. This can be a numerical id or
#  a symbolic value.
Gid cvsd

# CvsCommand <path>
#  If you define this it should point to the cvs
#  command to execute. Otherwise "/bin/cvs" will
#  be used if a RootJail is configured and the
#  cvs command found at compiletime otherwise.
#  The path should be relative to the specified
#  RootJail and should start with a '/'.

# CvsArgs <arg>...
#  Additional arguments to pass to the cvs command.
#  For example, to enable read-only access to the
#  repository, pass the -R option.

# Nice <num>
#  This specifies the nice value (on most systems
#  ranging from -20 to 20) where the smaller the number
#  (more negative) the higher the priority.
Nice 1

# Umask <mask>
#  This specifies a umask used by the cvs pserver when
#  creating files. Specify as an octal value.
Umask 027

# Limit <resource> <value>
#  <resource> can be one of: coredumpsize, cputime, datasize, filesize,
#  memorylocked, openfiles, maxproc, memoryuse, stacksize or virtmem.
#  <value> is the maximum value for the given resource. For size values
#  a suffix of 'b', 'k' or 'm' can be specified ('k' is default). Time
#  values can be formatted as 'mm:ss' or have 'm' or 's' suffixes
#  ('s' is default).
Limit coredumpsize 0

# PidFile <file>
#  This specifies the location the process id of the
#  daemon is written.
PidFile /var/run/cvsd.pid

# Listen <address> <port>
#  The addresses and ports to listen on for connections.
#Listen * 2401

# MaxConnections <num>
#  The maximum number of connections that will
#  be handled simultaneously. 0 is unlimited.
MaxConnections 10

# Log <scheme/file> [<loglevel>]
#  The way logging is done. Either none, syslog or a
#  filename may be specified, followed by an optional
#  loglevel. Loglevel may be one of:
#  crit, error, warning, notice, info (default) or debug.
#  This option can be supplied multiple times.
#  If this option is not specified syslog info is assumed.
Log syslog info
#Log /var/log/cvsd.log debug

# Repos <path>
#  This option specifies which repositories
#  can be used. The value is passed as a
#  --allow-root=<path> parameter to cvs.
#  The path should be relative to the specified
#  RootJail and should start with a '/'.
#  This option can be supplied multiple times.
Repos /test
Repos /coolsoftware

EOM
else
  # use the existing configfile
  cat "$configfile" > "$tmpconfigfile"
fi

# Location of Chroot jail
db_get cvsd/rootjail
[ "$RET" = "" ] || [ "$RET" = "/" ] && RET="none"
thingamagiggy "RootJail" "$RET"
if [ "$RET" = "none" ]; then
  (getent passwd cvsd | grep -q "^cvsd:.*:/:") || usermod -d "/" cvsd
else
  (getent passwd cvsd | grep -q "^cvsd:.*:$RET:") || usermod -d "$RET" cvsd
fi
rootjail="$RET"

# Maximum number of connections
db_get cvsd/maxconnections
[ -n "$RET" ] || RET=0
thingamagiggy "MaxConnections" "$RET"

# Nice value to run at
db_get cvsd/nice
[ -n "$RET" ] || RET=1
thingamagiggy "Nice" "$RET"

# Umask to use
db_get cvsd/umask
[ -n "$RET" ] || RET="027"
thingamagiggy "Umask" "$RET"

# Address-Port combinations to listen on
sed 's/^\([[:space:]]*\)Listen/\1x-Listen/' < "$tmpconfigfile" > "$tmpfile"
cat "$tmpfile" > "$tmpconfigfile"
# check current listen settings
db_get cvsd/listen
if [ -n "$RET" ]
then
  echo "$RET" | tr ' ' '\n' | while read addr
  do
    read port
    # if current config already contains this addr/port combination
    # remove the x-, otherwise add a new option
    addr_re=`echo "$addr" | sed "$RE_ESCAPE"`
    port_re=`echo "$port" | sed "$RE_ESCAPE"`
    if grep \
         '^[[:space:]]*x-Listen[[:space:]][[:space:]]*'"$addr_re"'[[:space:]][[:space:]]*'"$port_re"'[[:space:]]*$' \
         < "$tmpconfigfile" > /dev/null 2>&1
    then
      sed \
        's/^\([[:space:]]*\)x-\(Listen[[:space:]][[:space:]]*'"$addr_re"'[[:space:]][[:space:]]*'"$port_re"'[[:space:]]*\)$/\1\2/' \
        "$tmpconfigfile" > "$tmpfile"
      cat "$tmpfile" > "$tmpconfigfile"
    else
      echo "Listen $addr $port" >> "$tmpconfigfile"
    fi
  done
fi
# remove remaining x-Listen options
grep -v '^[[:space:]]*x-Listen' < "$tmpconfigfile" > "$tmpfile" || true
cat "$tmpfile" > "$tmpconfigfile"

# Repositories to have
sed 's/^\([[:space:]]*\)Repos/\1x-Repos/' < "$tmpconfigfile" > "$tmpfile"
cat "$tmpfile" > "$tmpconfigfile"
# check current repository settings
db_get cvsd/repositories
# remove extra repositories
OLDIFS="$IFS"
IFS=':'
for repos in $RET
do
  IFS="$OLDIFS"
  repos_re=`echo "$repos" | sed "$RE_ESCAPE"`
  if grep \
       '^[[:space:]]*x-Repos[[:space:]][[:space:]]*'"$repos_re"'[[:space:]]*$' \
       < "$tmpconfigfile" > /dev/null 2>&1
  then
    sed \
      's/^\([[:space:]]*\)x-\(Repos[[:space:]][[:space:]]*'"$repos_re"'[[:space:]]*\)$/\1\2/' \
      "$tmpconfigfile" > "$tmpfile"
    cat "$tmpfile" > "$tmpconfigfile"
  else
    echo "Repos $repos" >> "$tmpconfigfile"
  fi
done
# remove remaining x-Repos options
grep -v '^[[:space:]]*x-Repos' < "$tmpconfigfile" > "$tmpfile" || true
cat "$tmpfile" > "$tmpconfigfile"

# Limits
sed 's/^\([[:space:]]*\)Limit/\1x-Limit/' < "$tmpconfigfile" > "$tmpfile"
cat "$tmpfile" > "$tmpconfigfile"
# check current limits
db_get cvsd/limits
for limit in `echo "$RET" | sed 's/,//g'`
do
  db_get "cvsd/limit_$limit"
  if [ "x$RET" != "x" ]
  then
    value="$RET"
    value_rp=`echo "$value" | sed "$RP_ESCAPE"`
    if grep \
         '^[[:space:]]*x-Limit[[:space:]][[:space:]]*'"$limit"'[[:space:]]' \
         < "$tmpconfigfile" > /dev/null 2>&1
    then
      sed \
        's/^\([[:space:]]*\)x-\(Limit[[:space:]][[:space:]]*'"$limit"'[[:space:]]*\)[^[:space:]]*\([[:space:]]*\)$/\1\2'"$value_rp"'\3/' \
        "$tmpconfigfile" > "$tmpfile"
      cat "$tmpfile" > "$tmpconfigfile"
    else
      echo "Limit $limit $value" >> "$tmpconfigfile"
    fi
  fi
done
# remove remaining x-Limit options
grep -v '^[[:space:]]*x-Limit' < "$tmpconfigfile" > "$tmpfile" || true
cat "$tmpfile" > "$tmpconfigfile"

# acutually save (and make a backup) of the configfile
# only save if there are any differences
if ! diff "$tmpconfigfile" "$configfile" > /dev/null 2>&1
then
  if [ -e "$configfile" ]
  then
    # make backup
    [ -e "$configfile.old" ] || ( touch "$configfile.old"; chmod 644 "$configfile.old")
    cat "$configfile" > "$configfile.old"
  else
    # create configfile
    touch "$configfile"
    chmod 644 "$configfile"
  fi
  cat "$tmpconfigfile" > "$configfile"
fi
rm "$tmpconfigfile"
rm "$tmpfile"

# rebuild the rootjail
if [ "$rootjail" != "none" ]
then
  cvsd-buildroot "$rootjail"
fi

# Automatically added by dh_installinit
if [ -x "/etc/init.d/cvsd" ]; then
	update-rc.d cvsd defaults >/dev/null
	invoke-rc.d cvsd start || exit $?
fi
# End automatically added section


db_stop
exit 0