python-wxmpl 2.0.0-2 / usr / bin / plotit

#!/usr/bin/python

# Name: plotit
# Purpose: Experiment data visualization
# Author: Ken McIvor <mcivor@iit.edu>
#
# Copyright 2004-2009 Illinois Institute of Technology
#
# Permission is hereby granted, free of charge, to any person obtaining
# a copy of this software and associated documentation files (the
# "Software"), to deal in the Software without restriction, including
# without limitation the rights to use, copy, modify, merge, publish,
# distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so, subject to
# the following conditions:
#
# The above copyright notice and this permission notice shall be
# included in all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
# IN NO EVENT SHALL ILLINOIS INSTITUTE OF TECHNOLOGY BE LIABLE FOR ANY
# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of Illinois Institute
# of Technology shall not be used in advertising or otherwise to promote
# the sale, use or other dealings in this Software without prior written
# authorization from Illinois Institute of Technology.

# ChangeLog
#
# 10-17-2011  Carlo Segre <segre@iit.edu>
#  * Release 3.0
#  * Replace all references to Numerix with Numpy
# 02-21-2009  Ken McIvor <mcivor@iit.edu>
#  * Release 2.3.4
#  * Fixed a bug that was breaking the quickplot ('-q') mode
# 02-20-2009  Ken McIvor <mcivor@iit.edu>
#  * Release 2.3.3
#  * Stopped using the deprecated 'sre' module
#  * Updated legend formatting for matplotlib 0.98.x
#  * Dollar signs in axes labels are now properly escaped
# 04-06-2006  Ken McIvor <mcivor@iit.edu>
#  * Release 2.3.2
#  * Had another go at shutting down cleanly after the "exit" command while in
#    stripchart mode.
#  * Fixed a bug in cmd_START_PLOT()'s error handling.
# 04-04-2006  Ken McIvor <mcivor@iit.edu>
#  * Release 2.3.1
#  * Attemped to fix a subtle race condition that caused the plot window to
#    survive the "exit" command, hanging around at the end of MX quick scans.
#  * Switched to using LinearLocator(5) for X and Y axis tick locations to
#    yield nicer looking plots for the occasional corner cases (e.g. when
#    AutoLocator gives you 9 ticks with overlapping labels).
# 11-14-2005  Ken McIvor <mcivor@iit.edu>
#  * Release: 2.3
#  * Column names may be used in expressions if they are present in the files
#  * Empty data files no longer cause the entire plot to fail
#  * Column expressions are now masked arrays, clamping +/- INF
# 11-11-2005  Ken McIvor <mcivor@iit.edu>
#  * Merged the ScalarFormatter fix from August back into the main trunk.  This
#    fix undoes some of the confusing axis labeling caused by changes
#    introduced in matplotlib 0.81.
# 10-21-2005  Ken McIvor <mcivor@iit.edu>
#  * Release: 2.2
#  * Added full support for plotgngu.pl's start_plot command.  The two integer
#    arguments that were previously ignored are now required and specify the
#    number of columns of independently varying data and the column index that
#    contains the abscissa (starting from zero).
# 08-08-2005  Ken McIvor <mcivor@iit.edu>
#  * Release: 2.1.1
#  * Worked around a problem in matplotlib so that PlotIt no longer chokes on
#    expressions that evaluate to inf or NaN.
# 07-10-2005  Ken McIvor <mcivor@iit.edu>
#  * Release: 2.1
#  * Quickplot mode now correctly handles single-column data files.
#  * You can now plot only the Y expressions of files from the command line.
#  * PlotIt now tries to remeber its last window position, which should improve
#    the user experience when it's being used by MX to display scan data.
# 05-26-2005  Ken McIvor <mcivor@iit.edu>
#  * Release: 2.0
# 05-23-2005  Ken McIvor <mcivor@iit.edu>
#  * Fixed a bug in the `set linestyles' command.
#  * Made the linestyles, ticksize, and ticks `set' commands more robust
#    against invalid arguments.
#  * The PlotItApp no longer redirects stderr.
# 05-19-2005  Ken McIvor <mcivor@iit.edu>
#  * Release: 2.0rc4
#  * The command-line invocation has been changed so `$ plotit' won't appear to
#    hang as it reads commands from standard input.
#  * Added a quick-plotting mode that graphs the first two columns of files.
#  * Expression evaluation only does one row at a time if an error occurs.
#  * Error handling in expression evaluation is much more robust.
# 05-15-2005  Ken McIvor <mcivor@iit.edu>
#   * Release: 2.0rc3 (`plot' is now `plotit')
#   * Refactored the static vs. stripcharting logic out of PlotApp
#   * Cleaned up the MX kludges, especially the workaround for wx.PostEvent()
#     hanging after MainLoop() has exited (a queue is now used in place of the
#     CommandEvent).
#   * The plot window is now unclosable while stripcharting stdin.
#   * Fixed up bug where cmd_START_PLOT() relied entirely on parse_command() to
#     split up the equations.
#   * Added several new `set' commands: ticks, ticksize, linestyles.
#   * Added the `marker' command to draw vertical lines.
#   * Plot expressions now recognize `@N' for column names in addition to `$N'.
#   * Added the ability to do quick plots of multiple data files from the
#     command line.
# 05-12-2005  Ken McIvor <mcivor@iit.edu>
#   * Added some missing calls to sys.exit() to the ImportError handlers.
#   * Added the `start_plot' command and special case handling for MX's
#     inconsistent syntax (e.g. "start_plot;0;1;$f[0]/$f[1]").
#   * The `plot' command is now a no-op, since MX sends it after every `data'
#     command.
#   * Fixed a bug where `convert_plotgnu_expression()' was omitting the rest of
#     the expression after the last channel number (e.g. "log($0/$1)" was
#     becoming "log($2/$3")
#   * Added an `exit' command.
#   * Fixed the way the PlotApp and FileReaderThread interact because
#     `wx.PostEvent()' blocks after the PlotApp has exited.
# 05-10-2005  Ken McIvor <mcivor@iit.edu>
#   * release: 2.0rc2
#   * Default behavior is now to watch stdin, but not watch files.  The `-w'
#     argument has been changed to reflect this.
#   * Plot window now has a correct title, rather than just "WxMpl".
# 05-05-2005  Ken McIvor <mcivor@iit.edu>
#   * release: 2.0rc1
#   * WxMpl is now used for the plotting, rather than including wxPyPlot
#   * The `plot' command has been changed to be compatible with `plotgnu'
#   * A new command, `line', has been added to support the new equation syntax
#   * Replotting is now driven by a timer, rather than the arrival of new data
#   * The Python 2.1 compatability fixes have been removed, since matplotlib
#     requires Python 2.3 or later.
# 10-04-2004  Ken McIvor <mcivken@iit.edu>
#   * release: 1.1
#   * Debian Stable fixes:
#     - removed `typecode' keyword from Numerix.zeros()
#     - forcibly placed wxPython.wx.wxNewId() into wx as NewId()
# 10-03-2004  Ken McIvor <mcivken@iit.edu>
#   * release: 1.0

__version__ = '2.3.2'


import ConfigParser
import os.path
import re
import sys
import threading

try:
    import wx
except ImportError:
    if __name__ == '__main__':
        sys.stderr.write('''\
This program requires wxPython, the Python bindings for the wxWidgets GUI
framework.

    wxPython can be downloaded from http://www.wxpython.org
''')
        sys.exit(1)

try:
    import matplotlib
except ImportError:
    if __name__ == '__main__':
        sys.stderr.write('''\
This program requires matplotlib, Python's 2D plotting library.

    matplotlib can be downloaded from http://matplotlib.sourceforge.net
''')
        sys.exit(1)

try:
    import wxmpl
except ImportError:
    if __name__ == '__main__':
        sys.stderr.write('''\
This program requires WxMpl, a library for embedding matplotlib in wxPython
applications.

    WxMpl can be downloaded from http://agni.phys.iit.edu/~kmcivor/wxmp/
''')
        sys.exit(1)

try:
    import xdp.io # if it's available, use XDP to load data
except ImportError:
    xdp = None


import numpy as NumPy
from matplotlib.font_manager import FontProperties


class Queue:
    def __init__(self):
        self.mutex = threading.Lock()
        self.queue = []

    def put(self, item):
        self.mutex.acquire()
        self.queue.append(item)
        self.mutex.release()

    def getAll(self):
        self.mutex.acquire()
        items = self.queue[:]
        del self.queue[:]
        self.mutex.release()
        return items


#
# Functions to load and store the plot window's position.
#

# FIXME: this is rather POSIX-specific
PLOTIT_POSITION_FILE = '~/.plotitrc'


def load_window_position():
    fnam = os.path.expanduser(PLOTIT_POSITION_FILE)
    cp = ConfigParser.ConfigParser()

    try:
        cp.read([fnam])
        x = cp.getint('position', 'x')
        y = cp.getint('position', 'y')
    except Exception:
        return wx.DefaultPosition

    return wx.Point(x, y)


def store_window_position(pos):
    fnam = os.path.expanduser(PLOTIT_POSITION_FILE)
    cp = ConfigParser.ConfigParser()
    cp.add_section('position')
    cp.set('position', 'x', str(pos.x))
    cp.set('position', 'y', str(pos.y))
 
    try:
        output = file(fnam, 'w')
        cp.write(output)
        output.close()
    except Exception:
        pass


#
# wxPython Application class
#

class PlotItApp(wx.App):
    def __init__(self, options, arguments, **kwds):
        self.options = options
        self.director = None
        self.arguments = arguments
        wx.App.__init__(self, **kwds)

    def OnInit(self):
        self.frame = PlotFrame(pos=load_window_position())

        if len(self.arguments) < 2 and not options.quick:
            self.init_plotgnu()
        else:
            self.init_quickplot()

        self.frame.Show(True)
        return True

    def init_plotgnu(self):
        args = self.arguments

        if args[0] == '-':
            inputFile = sys.stdin
            options.watch = not options.watch
        else:
            try:
                inputFile = file(args[0], 'r')
            except IOError, e:
                fatalIOError(e)

        if self.options.watch:
            self.director = StripChartDirector(self.frame, inputFile)
        else:
            self.director = PlotCommandDirector(self.frame, inputFile)

    def init_quickplot(self):
        args = self.arguments
        style = 'lp'

        if options.lines and options.points:
            pass # let people type `-lp' like in GNUPLOT
        elif options.lines:
            style = 'l'
        elif options.points:
            style = 'p'

        if options.quick:
            self.director = QuickPlotDirector(self.frame, args, style)
        else:
            if len(args) == 2 or not is_plot_expression(args[1]):
                xExpr = None
                yExpr, fileNames = args[0], args[1:]
            else:
                xExpr, yExpr, fileNames = args[0], args[1], args[2:]

            self.director = ExpressionPlotDirector(self.frame, xExpr, yExpr,
                fileNames, style)

    def cleanup(self):
        self.director.cleanup()


class PlotFrame(wxmpl.PlotFrame):
    ABOUT_TITLE = 'About plotit'

    ABOUT_MESSAGE = ('plotit %s\n' %  __version__
        + 'Written by Ken McIvor <mcivor@iit.edu>\n'
        + 'Copyright 2004-2005 Illinois Institute of Technology')

    def __init__(self, **kwds):
        wxmpl.PlotFrame.__init__(self, None, -1, 'plotit', **kwds)


#
# Classes to perform the various kinds of plotting
#

class PlotDirector:
    def __init__(self, frame):
        self.frame = frame
        wx.EVT_CLOSE(self.frame, self.OnClose)

    def OnClose(self, evt):
        store_window_position(self.frame.GetPosition())
        evt.Skip()

    def setup_axes(self, axes):
        if matplotlib.__version__ >= '0.81':
            axes.yaxis.set_major_formatter(
                matplotlib.ticker.OldScalarFormatter())
            axes.yaxis.set_major_locator(
                matplotlib.ticker.LinearLocator(5))

            axes.xaxis.set_major_formatter(
                matplotlib.ticker.OldScalarFormatter())
            axes.xaxis.set_major_locator(
                matplotlib.ticker.LinearLocator(5))

    def cleanup(self):
        pass


class PlotCommandDirector(PlotDirector):
    def __init__(self, frame, inputFile):
        PlotDirector.__init__(self, frame)

        frame.SetTitle(get_frame_title(inputFile))
        interpreter = CommandInterpreter(frame.get_figure().gca(),
           inputFile, ignoreExit=True)

        line = inputFile.readline()
        while line:
            line = line.strip()
            interpreter.doCommand(line)
            line = inputFile.readline()
        interpreter.replot()


class StripChartDirector(PlotDirector):
    def __init__(self, frame, inputFile):
        PlotDirector.__init__(self, frame)

        axes = frame.get_figure().gca()
        self.setup_axes(axes)

        frame.SetTitle(get_frame_title(inputFile))
        self.inputFile = inputFile
        self.canClose = inputFile is not sys.stdin

        self.interpreter = CommandInterpreter(axes, inputFile)
        self.queue = Queue()
        self.fileReader = FileReaderThread(inputFile, self.queue)
        self.timer = wx.PyTimer(self.OnTimer)

        self.timer.Start(250)
        self.fileReader.start()

    def OnClose(self, evt):
        if not self.canClose and evt.CanVeto() and self.fileReader.isAlive():
            wx.Bell()
            evt.Veto()
        else:
            self.timer.Stop()
            PlotDirector.OnClose(self, evt)

    def OnTimer(self):
        interpreter = self.interpreter

        for cmd in self.queue.getAll():
            interpreter.doCommand(cmd)
            if interpreter.hasExited:
                self.timer.Stop()
                try:
                    self.inputFile.close()
                except:
                    pass

        if self.fileReader.isAlive():
            interpreter.replot()
        else:
            self.timer.Stop()
            interpreter.replot()

    def cleanup(self):
        if self.fileReader.isAlive():
            self.fileReader.join()


class QuickPlotDirector(PlotDirector):
    def __init__(self, frame, inputFiles, style):
        PlotDirector.__init__(self, frame)
        frame.SetTitle('PlotIt')

        axes = frame.get_figure().gca()
        self.setup_axes(axes)

        # FIXME: refactor this chunk into a function shared by
        # QuickPlotDirector and ExpressionPlotDirector
        lines = []
        for inputFile in inputFiles[:]:
            x, y = quickplot_evaluate_file(inputFile)
            if x is None or y is None:
                inputFiles.remove(inputFile)
            else:
                lines.append((x, y))

        inputs = [split_path(x) for x in inputFiles]
        if len(inputs) == 1:
            idx = 0
        else:
            idx = len(os.path.commonprefix([x[0] for x in inputs]))

        matplotlib.rc('lines', markersize=2)
        for i, (x, y) in enumerate(lines):
            if x is None or y is None:
                continue

            path, name = inputs[i]
            fullName = os.path.join(path[idx:], name)
            line = axes.plot(x, y, label=fullName)[0]

            if style == 'l':
                pass
            elif style == 'p':
                line.set_linestyle('None')
                line.set_marker('o')
            else:
                line.set_marker('o')
            line.set_markeredgecolor(line.get_color())
            line.set_markerfacecolor(line.get_color())

        if not axes.get_lines():
            sys.stderr.write('%s: no data to plot\n'
                % os.path.basename(sys.argv[0]))
            sys.exit(1)

        axes.legend(numpoints=2, prop=FontProperties(size='x-small'))


class ExpressionPlotDirector(PlotDirector):
    def __init__(self, frame, xExpr, yExpr, inputFiles, style):
        PlotDirector.__init__(self, frame)
        frame.SetTitle('PlotIt')

        axes = frame.get_figure().gca()
        self.setup_axes(axes)
        axes.set_ylabel(yExpr.replace('@', '$').replace('$', '\$'))

        if xExpr is None:
            axes.set_xlabel('0...N')
        else:
            axes.set_xlabel(xExpr.replace('@', '$').replace('$', '\$'))

        lines = []
        for inputFile in inputFiles[:]:
            x, y = evaluate_file(inputFile, xExpr, yExpr)
            if x is None or y is None:
                inputFiles.remove(inputFile)
            else:
                lines.append((x, y))

        inputs = [split_path(x) for x in inputFiles]
        if len(inputs) == 1:
            idx = 0
        else:
            idx = len(os.path.commonprefix([x[0] for x in inputs]))

        matplotlib.rc('lines', markersize=2)
        for i, (x, y) in enumerate(lines):
            if x is None or y is None:
                continue

            path, name = inputs[i]
            fullName = os.path.join(path[idx:], name)
            line = axes.plot(x, y, label=fullName)[0]

            if style == 'l':
                pass
            elif style == 'p':
                line.set_linestyle('None')
                line.set_marker('o')
            else:
                line.set_marker('o')
            line.set_markeredgecolor(line.get_color())
            line.set_markerfacecolor(line.get_color())

        if not axes.get_lines():
            sys.stderr.write('%s: no data to plot\n'
                % os.path.basename(sys.argv[0]))
            sys.exit(1)

        axes.legend(numpoints=2, prop=FontProperties(size='x-small'))

    def cleanup(self):
        pass



#
# Thread that pushes lines from a file into a Queue
#

class FileReaderThread(threading.Thread):
    def __init__(self, inputFile, queue):
        threading.Thread.__init__(self, name='FileReader')
        self.queue = queue
        self.inputFile = inputFile

    def run(self):
        queue = self.queue
        inputFile = self.inputFile

        line = inputFile.readline()
        while line:
            line = line.strip()
            queue.put(line)
            line = inputFile.readline()


#
# Class that executes plotting commands
#

class CommandInterpreter:
    def __init__(self, axes, inputFile, ignoreExit=False):
        self.axes = axes
        self.ignoreExit = ignoreExit

        if inputFile is sys.stdin:
            self.fileDesc = 'standard input'
        else:
            self.fileDesc = 'file `%s\'' % inputFile.name

        self.buffer = wxmpl.MatrixBuffer()
        self.charter = wxmpl.StripCharter(axes)
        self.channels = []
        self.hasExited = False
        self.need_replot = False

        matplotlib.rc('lines', markersize=2)

    def replot(self):
        if self.need_replot and not self.hasExited:
            self.need_replot = False
            self.charter.update()

    def doCommand(self, command):
        tokens = self.parse_command(command)
        if not len(tokens):
            return

        cmd, args = tokens[0].upper(), tokens[1:]
        method = getattr(self, 'cmd_%s'%cmd, None)
        if callable(method) and method(args):
            self.need_replot = True

    def parse_command(self, command):
        if command.startswith('start_plot;'):
            return ['start_plot'] + command.split(';')[1:]

        try:
            return tokenize(command)
        except Exception:
            return []

    def cmd_START_PLOT(self, args):
        if len(args) < 3:
            return False

        try:
            independent_variable_count = int(args[0])
            innermost_loop_motor_index = int(args[1])
        except (ValueError, OverflowError), e:
            print >> sys.stderr, (
                'Error in "start_plot" statement for file %s: %s'
                % (self.fileDesc, e))
            return False

        if independent_variable_count < 1:
            independent_variable_count = 0

        if innermost_loop_motor_index < 0:
            innermost_loop_motor_index = 0

        xExpr = '$%d' % (innermost_loop_motor_index + 1)

        for eqn in args[2:]:
            yExpr = convert_plotgnu_expression(eqn, independent_variable_count)
            channel = ExpressionChannel(self.buffer, xExpr, yExpr,
                self.fileDesc)
            channel.marker = 'o'
            self.channels.append(channel)
        self.charter.setChannels(self.channels)
        return True

    def cmd_PLOT(self, args):
        return False

    def cmd_REPLOT(self, args):
        self.replot()
        return False

    def cmd_SET(self, args):
        if len(args):
            var, args = args[0].upper(), args[1:]

            if len(args) and args[0] == '=':
                args = args[1:]

            method = getattr(self, 'set_%s'%var, None)
            if callable(method):
                return method(args)
        return False

    def cmd_DATA(self, args):
        if not len(args):
            return False

        data = [0.0] * len(args)
        for i, point in enumerate(args):
            try:
                data[i] = float(point)
            except Exception, e:
                pass

        self.buffer.append(data)
        for channel in self.channels:
            channel.recalculate()
        return True

    def cmd_MARKER(self, args):
        if len(args) != 1:
            return False

        try:
            x = float(args[0])
        except:
            return False

        self.axes.axvline(x, color='k', linestyle='--')
        return True

    def set_TITLE(self, args):
        if len(args) == 1:
            self.axes.set_title(args[0])
            return True
        else:
            return False

    def set_XLABEL(self, args):
        if len(args) == 1:
            self.axes.set_xlabel(args[0])
            return True
        else:
            return False

    def set_YLABEL(self, args):
        if len(args) == 1:
            self.axes.set_ylabel(args[0])
            return True
        else:
            return False

    def set_TIC(self, args):
        return self.set_TICKS(args)

    def set_TICS(self, args):
        return self.set_TICKS(args)

    def set_TICSIZE(self, args):
        return self.set_TICKSIZE(args)

    def set_TICKS(self, args):
        if len(args):
            ticks = []
            for tick in args:
                if matplotlib.lines.Line2D._markers.has_key(tick):
                    ticks.append(tick)
                else:
                    ticks.append(None)
            for i, marker in enumerate(ticks[:len(self.channels)]):
                self.channels[i].marker = marker
        else:
            for channel in self.channels:
                channel.marker = None
        self.charter.setChannels(self.channels)
        return True

    def set_TICKSIZE(self, args):
        if len(args) == 0:
            matplotlib.rc('lines', markersize=2)
            return
        elif len(args) != 1:
            return True

        try:
            size = float(args[0])
        except:
            return False

        if markersize <= 0:
            return False

        matplotlib.rc('lines', markersize=size)
        return True

    def set_LINESTYLES(self, args):
        if len(args):
            styles = []
            for style in args:
                if matplotlib.lines.Line2D._lineStyles.has_key(style):
                    styles.append(style)
                else:
                    styles.append(None)
            for i, style in enumerate(styles[:len(self.channels)]):
                self.channels[i].style = style
        else:
            for channel in self.channels:
                channel.style = None
        self.charter.setChannels(self.channels)
        return True

    def set_LEGEND(self, args):
        if len(args):
            for i, label in enumerate(args[:len(self.channels)]):
                self.channels[i].name = label
            self.charter.setChannels(self.channels)
        else:
            self.axes.legend_ = None
        return True

    def cmd_EXIT(self, args):
        if self.ignoreExit:
            return False

        app = wx.GetApp()
        if app is not None:
            app.ExitMainLoop()
            self.hasExited = True
        return False


#
# Channels that calculate their X and Y data from expressions
#

class ExpressionChannel(wxmpl.Channel):
    def __init__(self, buffer, xExpr, yExpr, fileDesc):
        if xExpr is None:
            label = yExpr
        else:
            label = xExpr + ', ' + yExpr

        wxmpl.Channel.__init__(self, label)
        self.buffer = buffer
        self.x = None
        self.y = None
        self.xExpr = xExpr
        self.yExpr = yExpr
        self.fileDesc = fileDesc

    def getX(self):
        def failure(msg, *args):
            print >> sys.stderr, (msg % args) ; self.x = None ; return None

        if self.x is not None:
            return self.x

        if self.xExpr is None:
            data = self.buffer.getData()
            if data is not None:
                self.x = data[:, 0]
                return self.x

        try:
            self.x = evaluate_expression(self.xExpr, self.buffer.getData())
        except Exception, e:
            return failure('Error evaluating X expression `%s\' for %s: %s',
                self.xExpr, self.fileDesc, e)

        if (self.x is not None
        and not isinstance(self.x,
         (NumPy.ArrayType, NumPy.ma.MaskedArray))):
            return failure('Error evaluating X expression `%s\' for %s: '
                'result is not a vector', self.xExpr, self.fileDesc)

        return self.x

    def getY(self):
        def failure(msg, *args):
            print >> sys.stderr, (msg % args) ; self.y = None ; return None

        if self.y is not None:
            return self.y

        try:
            self.y = evaluate_expression(self.yExpr, self.buffer.getData())
        except Exception, e:
            return failure('Error evaluating Y expression `%s\' for %s: %s',
                self.yExpr, self.fileDesc, e)

        if (self.y is not None
        and not isinstance(self.y,
         (NumPy.ArrayType, NumPy.ma.MaskedArray))):
            return failure('Error evaluating Y expression `%s\' for %s: '
                'result is not a vector', self.yExpr, self.fileDesc)

        return self.y

    def recalculate(self):
        self.x = self.y = None
        self.setChanged(True)


#
# Evaluate X and Y expressions using a file of data
#

def quickplot_evaluate_file(fileName):
    def failure(msg, *args):
        print >> sys.stderr, (msg % args)
        return None, None

    data, columnNames = load_data(fileName)
    if data is None:
        return None, None

    if data.shape[1] == 1:
        return NumPy.arange(0, data.shape[0], 1, dtype=float), data[:, 0]
    else:
        return data[:, 0], data[:, 1]


def evaluate_file(fileName, xExpr, yExpr):
    def failure(msg, *args):
        print >> sys.stderr, (msg % args)
        return None, None

    data, columnNames = load_data(fileName)
    if data is None:
        return None, None

    try:
        x = evaluate_expression(xExpr, data, columnNames)
    except Exception, e:
        return failure('Error evaluating X for file `%s\': %s', fileName, e)

    try:
        y = evaluate_expression(yExpr, data, columnNames)
    except Exception, e:
        return failure('Error evaluating Y for file `%s\': %s', fileName, e)

    if not isinstance(x, (NumPy.ArrayType, NumPy.ma.MaskedArray)):
        return failure('Error evaluating X for file `%s\': result is not a '
            'vector', fileName)
    elif not isinstance(y, (NumPy.ArrayType, NumPy.ma.MaskedArray)):
        return failure('Error evaluating Y for file `%s\': result is not a '
            'vector', fileName)

    if x.shape != y.shape:
        return failure('BUG? x.shape != y.shape for file `%s\'', fileName)

    return x, y


def load_data(fileName):
    if xdp is not None:
        try:
            header, dataset = xdp.io.readFile(fileName)
        except IOError:
            pass
        else:
            return dataset.getMatrix(), dataset.getColumnNames()

    try:
        input = file(fileName, 'r')
    except IOError, e:
        fatalIOError(e)

    buffer = wxmpl.MatrixBuffer()

    line = input.readline()
    while line:
        line = line.strip()
        if line:
            _parse_data(buffer, line)
        line = input.readline()

    input.close()
    return buffer.getData(), ()


def _parse_data(buffer, line):
    failures = 0
    values = line.split()
    data = [0.0] * len(values)
    for i, point in enumerate(values):
        try:
            data[i] = float(point)
        except Exception, e:
            if i == 0 and point == 'data':
                failures += 1
            else:
                return

    if failures:
        buffer.append(data[failures:])
    else:
        buffer.append(data)


#
# Evaluating equations against a matrix
#

def is_plot_expression(string):
    return (COLNUMS.search(string) is not None
        or COLNAMES.search(string) is not None
        or PG_COLNUMS.search(string) is not None)


def convert_plotgnu_expression(pgExpr, offset):
    i = 0
    expr = ''
    while 1:
        m = PG_COLNUMS.search(pgExpr[i:])
        if m is None:
            break
        expr += pgExpr[i:i+m.start()]
        expr += '$' + str(int(m.group('number'))+offset+1)
        i += m.end()
    expr += pgExpr[i:]
    return expr


def evaluate_expression(expr, data, columnNames=()):
    if data is None:
        return None
    elif expr is None:
        return NumPy.arange(0, data.shape[0], 1, dtype=float)

    columnCount = data.shape[1]
    namespace = EVAL_NAMESPACE.copy()

    for column, _, number in COLNUMS.findall(expr):
        number = int(number)
        if number < 1 or number > columnCount:
            raise ValueError('invalid column "%s"' % number)

    for column, _, name in COLNAMES.findall(expr):
        if not columnNames:
            raise ValueError('column names are unavailable')
        elif name not in columnNames:
            raise ValueError('invalid column "%s"' % name)

    expr = COLNUMS.sub('__C_\g<number>', expr)
    expr = COLNAMES.sub('__C_\g<name>', expr)

    try:
        code = compile(expr, '<expr>', 'eval')
    except SyntaxError, e:
        raise ValueError('incorrect syntax: %s' % e)

    for i in range(0, columnCount):
        namespace['__C_%d' % (i+1)] = None
    for i in range(0, min(columnCount, len(columnNames))):
        namespace['__C_%s' % columnNames[i]] = None

    for var in code.co_names:
        if not namespace.has_key(var):
            raise ValueError('invalid variable "%s"' % var)

    # try to evaluate things the fast way
    # XXX: causes problems with Matplotlib, which chokes on `inf' and `NaN'.
    for i in range(0, columnCount):
        namespace['__C_%d' % (i+1)] = data[:, i]
    for i in range(0, min(columnCount, len(columnNames))):
        namespace['__C_%s' % columnNames[i]] = data[:, i]

    try:
        result = eval(code, namespace)
        return NumPy.ma.masked_outside(result, -1e308, 1e308)
    except Exception, e:
        pass

    # evaluate one point at a time if necessary
    res = NumPy.zeros((data.shape[0],), dtype=float)
    for i in range(0, data.shape[0]):
        for j in range(0, columnCount):
            namespace['__C_%d' % (j+1)] = data[i, j]
        for j in range(0, min(columnCount, len(columnNames))):
            namespace['__C_%s' % columnNames[j]] =data[i, j]

        try:
            res[i] = eval(code, namespace)
        except Exception, e:
            pass
    return res

COLNUMS    = re.compile(r'(?P<column>(\$|\@)(?P<number>\d+))')
COLNAMES   = re.compile(r'(?P<column>(\$|\@)(?P<name>[a-zA-Z_][a-zA-Z0-9_]*))')
PG_COLNUMS = re.compile(r'(?P<column>\$f\[(?P<number>\d+)\])')

EVAL_NAMESPACE = {
    'int': int,
    'float': float,
    'complex': complex,
    'pi': NumPy.pi,
    'e': NumPy.e,
    'abs': NumPy.absolute,
    'arccos': NumPy.arccos,
    'arccosh': NumPy.arccosh,
    'arcsin': NumPy.arcsin,
    'arcsinh': NumPy.arcsinh,
    'arctan': NumPy.arctan,
    'arctanh': NumPy.arctanh,
    'cos': NumPy.cos,
    'cosh': NumPy.cosh,
    'exp': NumPy.exp,
    'log': NumPy.log,
    'log10': NumPy.log10,
    'power': NumPy.power,
    'sin': NumPy.sin,
    'sinh': NumPy.sinh,
    'sqrt': NumPy.sqrt,
    'tan': NumPy.tan,
    'tanh': NumPy.tanh
}


#
# Potpourri utility functions
#

WORD   = r'(\\.)|[^"\'\s]'
DWORD  = r'(\\.)|[^"\s]'
SWORD  = r'(\\.)|[^\'\s]'
DQUOTE = r'%s| |\t' % SWORD
SQUOTE = r'%s| |\t' % SWORD
RE_SKIP  = re.compile(r'\s+')
RE_TOKEN = re.compile(r'(%s)+|("(%s|(\\.))*")|(\'(%s|(\\.))*\')' % (WORD,
    DQUOTE, SQUOTE))

def tokenize(string, limit=None):
    tokens = []

    while string:
        m = RE_SKIP.match(string)
        if m is not None:
            string = string[m.end():]

        if not string:
            break

        if limit is not None and len(tokens) == limit:
            tokens.append(string)
            break

        m = RE_TOKEN.match(string)

        if m is None:
            return None

        tok = string[:m.end()]
        if tok.startswith('"') or tok.startswith('\''):
            tok = tok[1:-1]
        tokens.append(tok)
        string = string[m.end():]

    return tokens


def enumerate(seq):
    return [(i,seq[i]) for i in range(0, len(seq))]


def split_path(fileName):
    name = os.path.basename(fileName)
    path = os.path.dirname(os.path.abspath(fileName))
    user = os.path.expanduser('~')
    if user != '~':
        path = path.replace(user, '~')
    return path, name


def cleanup_path(fileName):
    return os.path.join(*split_path(fileName))


def get_frame_title(inputFile):
    if inputFile is sys.stdin:
        return 'stdin - PlotIt'
    else:
        path, name = split_path(inputFile.name)
        return (name + ' (' + path + ') - PlotIt')


#
# Command-Line Interface
#

def fatalError(msg):
    sys.stderr.write('Error: ')
    sys.stderr.write(str(msg))
    sys.stderr.write('\n')
    sys.exit(1)


def fatalIOError(err):
    if isinstance(err, IOError) and err.strerror and err.filename:
        err = '%s: %s' % (err.strerror, err.filename)
    fatalError(err)


def ParseArguments(args):
    from optparse import OptionParser

    USAGE = '''\
%prog [-w] FILE: execute the commands read from FILE (use `-' for stdin)
       %prog [-lp] -q FILE [FILE...]:  plot the 1st and 2nd columns of files
       %prog [-lp] Y FILE [FILE...]:   plot the Y expressions for files
       %prog [-lp] X Y FILE [FILE...]: plot the X and Y expressions for files

`%prog' is a simple plotting program which can draw line plots and stripcharts
using a subset of GNUPLOT's command language.  You can also do quick plots of
multiple data files from the command-line.'''
    VERSION = '%prog ' + __version__ + ', by Ken McIvor <mcivor@iit.edu>'
    parser = OptionParser(usage=USAGE, version=VERSION)

    #
    # Command-line options
    #
    parser.add_option('-w',
        action='store_const',
        dest='watch',
        const=True,
        default=False,
        help=('watch the input file for commands to stripchart, or wait to '
            + ' read all of of stdin before plotting'))

    parser.add_option('-q',
        action='store_const',
        dest='quick',
        const=True,
        default=False,
        help='plot the first and second columns of multiple files')

    parser.add_option('-l',
        action='store_const',
        dest='lines',
        const=True,
        default=False,
        help='plot X and Y with lines')

    parser.add_option('-p',
        action='store_const',
        dest='points',
        const=True,
        default=False,
        help='plot X and Y with points')

    opts, args = parser.parse_args(args)

    if (not len(args)
    or (len(args) == 2
    and is_plot_expression(args[0])
    and is_plot_expression(args[1]))):
        parser.print_usage()
        sys.exit(1)

    return opts, args


#
# Application entry-point
#

def main(options, arguments):
    app = PlotItApp(options, arguments, redirect=0)
    app.MainLoop()
    app.cleanup()


#
# Magic incantation to call main() when run as a script
#

if __name__ == '__main__':
    try:
        options, arguments = ParseArguments(sys.argv[1:])
        main(options, arguments)
    except KeyboardInterrupt:
        pass