/usr/lib/ocf/resource.d/heartbeat/IPaddr is in resource-agents 1:3.9.2-5ubuntu4.
This file is owned by root:root, with mode 0o755.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 | #!/bin/sh
#
# License: GNU General Public License (GPL)
# Support: linux-ha@lists.linux-ha.org
#
# This script manages IP alias IP addresses
#
# It can add an IP alias, or remove one.
#
# usage: $0 {start|stop|status|monitor|validate-all|meta-data}
#
# The "start" arg adds an IP alias.
#
# Surprisingly, the "stop" arg removes one. :-)
#
# OCF parameters are as below
# OCF_RESKEY_ip
# OCF_RESKEY_broadcast
# OCF_RESKEY_nic
# OCF_RESKEY_cidr_netmask
# OCF_RESKEY_lvs_support ( e.g. true, on, 1 )
# OCF_RESKEY_ARP_INTERVAL_MS
# OCF_RESKEY_ARP_REPEAT
# OCF_RESKEY_ARP_BACKGROUND (e.g. yes )
# OCF_RESKEY_ARP_NETMASK
# OCF_RESKEY_local_start_script
# OCF_RESKEY_local_stop_script
#
#######################################################################
# Initialization:
: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
SENDARP=$HA_BIN/send_arp
FINDIF=$HA_BIN/findif
VLDIR=$HA_RSCTMP
SENDARPPIDDIR=$HA_RSCTMP
SENDARPPIDFILE="$SENDARPPIDDIR/send_arp-$OCF_RESKEY_ip"
USAGE="usage: $0 {start|stop|status|monitor|validate-all|meta-data}";
#######################################################################
SYSTYPE="`uname -s`"
case "$SYSTYPE" in
SunOS)
# `uname -r` = 5.9 -> SYSVERSION = 9
SYSVERSION="`uname -r | cut -d. -f 2`"
;;
Darwin)
# Treat Darwin the same as the other BSD variants (matched as *BSD)
SYSTYPE="${SYSTYPE}BSD"
;;
*)
;;
esac
meta_data() {
cat <<END
<?xml version="1.0"?>
<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
<resource-agent name="IPaddr">
<version>1.0</version>
<longdesc lang="en">
This script manages IP alias IP addresses
It can add an IP alias, or remove one.
</longdesc>
<shortdesc lang="en">Manages virtual IPv4 addresses (portable version)</shortdesc>
<parameters>
<parameter name="ip" unique="1" required="1">
<longdesc lang="en">
The IPv4 address to be configured in dotted quad notation, for example
"192.168.1.1".
</longdesc>
<shortdesc lang="en">IPv4 address</shortdesc>
<content type="string" default="" />
</parameter>
<parameter name="nic" unique="0">
<longdesc lang="en">
The base network interface on which the IP address will be brought
online.
If left empty, the script will try and determine this from the
routing table.
Do NOT specify an alias interface in the form eth0:1 or anything here;
rather, specify the base interface only.
Prerequisite:
There must be at least one static IP address, which is not managed by
the cluster, assigned to the network interface.
If you can not assign any static IP address on the interface,
modify this kernel parameter:
sysctl -w net.ipv4.conf.all.promote_secondaries=1
(or per device)
</longdesc>
<shortdesc lang="en">Network interface</shortdesc>
<content type="string" default="eth0"/>
</parameter>
<parameter name="cidr_netmask">
<longdesc lang="en">
The netmask for the interface in CIDR format. (ie, 24), or in
dotted quad notation 255.255.255.0).
If unspecified, the script will also try to determine this from the
routing table.
</longdesc>
<shortdesc lang="en">Netmask</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="broadcast">
<longdesc lang="en">
Broadcast address associated with the IP. If left empty, the script will
determine this from the netmask.
</longdesc>
<shortdesc lang="en">Broadcast address</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="iflabel">
<longdesc lang="en">
You can specify an additional label for your IP address here.
</longdesc>
<shortdesc lang="en">Interface label</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="lvs_support">
<longdesc lang="en">
Enable support for LVS Direct Routing configurations. In case a IP
address is stopped, only move it to the loopback device to allow the
local node to continue to service requests, but no longer advertise it
on the network.
</longdesc>
<shortdesc lang="en">Enable support for LVS DR</shortdesc>
<content type="boolean" default="false"/>
</parameter>
<parameter name="local_stop_script">
<longdesc lang="en">
Script called when the IP is released
</longdesc>
<shortdesc lang="en">Script called when the IP is released</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="local_start_script">
<longdesc lang="en">
Script called when the IP is added
</longdesc>
<shortdesc lang="en">Script called when the IP is added</shortdesc>
<content type="string" default=""/>
</parameter>
<parameter name="ARP_INTERVAL_MS">
<longdesc lang="en">
milliseconds between ARPs
</longdesc>
<shortdesc lang="en">milliseconds between gratuitous ARPs</shortdesc>
<content type="integer" default="500"/>
</parameter>
<parameter name="ARP_REPEAT">
<longdesc lang="en">
How many gratuitous ARPs to send out when bringing up a new address
</longdesc>
<shortdesc lang="en">repeat count</shortdesc>
<content type="integer" default="10"/>
</parameter>
<parameter name="ARP_BACKGROUND">
<longdesc lang="en">
run in background (no longer any reason to do this)
</longdesc>
<shortdesc lang="en">run in background</shortdesc>
<content type="boolean" default="yes"/>
</parameter>
<parameter name="ARP_NETMASK">
<longdesc lang="en">
netmask for ARP - in nonstandard hexadecimal format.
</longdesc>
<shortdesc lang="en">netmask for ARP</shortdesc>
<content type="string" default="ffffffffffff"/>
</parameter>
</parameters>
<actions>
<action name="start" timeout="20s" />
<action name="stop" timeout="20s" />
<action name="monitor" depth="0" timeout="20s" interval="5s" />
<action name="validate-all" timeout="20s" />
<action name="meta-data" timeout="5s" />
</actions>
</resource-agent>
END
exit $OCF_SUCCESS
}
# The 'ping' command takes highly OS-dependent arguments, so this
# function creates a suitable argument list for the host OS's 'ping'.
# We use a subset of its functionality:
# 1. single packet
# 2. reasonable timeout (say 1 second)
#
# arguments:
# $1: IP address to ping
# result string:
# arguments for ping command
#
# If more flexibility is needed, they could be specified in the environment
# to this function, to adjust the resulting 'ping' arguments.
# David Lee <t.d.lee@durham.ac.uk> May 2007
pingargs() {
_baseip=$1
_timeout=1 # seconds
_pktcount=1
_systype="`uname -s`"
case $_systype in
Linux)
# Default is perpetual ping: need "-c $_pktcount".
# -c count -t timetolive -q(uiet) -n(umeric) -W timeout
_pingargs="-c $_pktcount -q -n $_baseip"
;;
SunOS)
# Default is immediate (or timeout) return.
_pingargs="$_baseip $_timeout"
;;
*)
_pingargs="-c $_pktcount $_baseip"
;;
esac
echo "$_pingargs"
}
# On Linux systems the (hidden) loopback interface may
# conflict with the requested IP address. If so, this
# unoriginal code will remove the offending loopback address
# and save it in VLDIR so it can be added back in later
# when the IPaddr is released.
#
lvs_remove_conflicting_loopback() {
ipaddr="$1"
ifname="$2"
ocf_log info "Removing conflicting loopback $ifname."
if
echo $ifname > "$VLDIR/$ipaddr"
then
: Saved loopback information in $VLDIR/$ipaddr
else
ocf_log err "Could not save conflicting loopback $ifname." \
"it will not be restored."
fi
delete_interface "$ifname" "$ipaddr"
# Forcibly remove the route (if it exists) to the loopback.
delete_route "$ipaddr"
}
#
# On Linux systems the (hidden) loopback interface may
# need to be restored if it has been taken down previously
# by lvs_remove_conflicting_loopback()
#
lvs_restore_loopback() {
ipaddr="$1"
if [ ! -s "$VLDIR/$ipaddr" ]; then
return
fi
ifname=`cat "$VLDIR/$ipaddr"`
ocf_log info "Restoring loopback IP Address $ipaddr on $ifname."
CMD="OCF_RESKEY_cidr_netmask=32 OCF_RESKEY_ip=$1 OCF_RESKEY_nic=$ifname $FINDIF"
if
NICINFO=`eval $CMD`
NICINFO=`echo $NICINFO | tr " " " " | tr -s " "`
then
netmask_text=`echo "$NICINFO" | cut -f3 -d " "`
broadcast=`echo "$NICINFO" | cut -f5 -d " "`
else
echo "ERROR: $CMD failed (rc=$rc)"
exit $OCF_ERR_GENERIC
fi
add_interface "$ipaddr" "$ifname" "$ifname" $netmask_text $broadcast
rm -f "$VLDIR/$ipaddr"
}
#
# Find out which alias serves the given IP address
# The argument is an IP address, and its output
# is an aliased interface name (e.g., "eth0:0").
#
find_interface_solaris() {
ipaddr="$1"
$IFCONFIG $IFCONFIG_A_OPT | $AWK '{if ($0 ~ /.*: / && NR > 1) {print "\n"$0} else {print}}' |
while read ifname linkstuff
do
: ifname = $ifname
read inet addr junk
: inet = $inet addr = $addr
while
read line && [ "X$line" != "X" ]
do
: Nothing
done
case $ifname in
*:*) ;;
*) continue;;
esac
# This doesn't look right for a box with multiple NICs.
# It looks like it always selects the first interface on
# a machine. Yet, we appear to use the results for this case too...
ifname=`echo "$ifname" | sed s'%:$%%'`
case $addr in
addr:$ipaddr) echo $ifname; return $OCF_SUCCESS;;
$ipaddr) echo $ifname; return $OCF_SUCCESS;;
esac
done
return $OCF_ERR_GENERIC
}
find_interface_bsd() {
$IFCONFIG $IFCONFIG_A_OPT | awk -v ip_addr="$ipaddr" '
/UP,/ && $0 ~ /^[a-z]+[0-9]:/ {
if_name=$1; sub(":$","",if_name);
}
$1 == "inet" && $2 == ip_addr {
print if_name
exit(0)
}'
}
#
# Find out which alias serves the given IP address
# The argument is an IP address, and its output
# is an aliased interface name (e.g., "eth0:0").
#
find_interface_generic() {
ipaddr="$1"
$IFCONFIG $IFCONFIG_A_OPT |
while read ifname linkstuff
do
: Read gave us ifname = $ifname
read inet addr junk
: Read gave us inet = $inet addr = $addr
while
read line && [ "X$line" != "X" ]
do
: Nothing
done
case $ifname in
*:*) ;;
*) continue;;
esac
: "comparing $ipaddr to $addr (from ifconfig)"
case $addr in
addr:$ipaddr) echo $ifname; return $OCF_SUCCESS;;
$ipaddr) echo $ifname; return $OCF_SUCCESS;;
esac
done
return $OCF_ERR_GENERIC
}
#
# Find out which alias serves the given IP address
# The argument is an IP address, and its output
# is an aliased interface name (e.g., "eth0:0").
#
find_interface() {
ipaddr="$1"
case "$SYSTYPE" in
SunOS)
NIC=`find_interface_solaris $ipaddr`;;
*BSD)
NIC=`find_interface_bsd $ipaddr`;;
*)
NIC=`find_interface_generic $ipaddr`;;
esac
echo $NIC
return $OCF_SUCCESS;
}
#
# Find an unused interface/alias name for us to use for new IP alias
# The argument is an IP address, and the output
# is an aliased interface name (e.g., "eth0:0", "dc0", "le0:0").
#
find_free_interface() {
NIC="$1"
if [ "X$NIC" = "X" ]; then
ocf_log err "No free interface found for $OCF_RESKEY_ip"
return $OCF_ERR_GENERIC;
fi
NICBASE="$VLDIR/IPaddr-$NIC"
touch "$NICBASE"
case "$SYSTYPE" in
*BSD)
echo $NIC;
return $OCF_SUCCESS;;
SunOS)
j=1
IFLIST=`$IFCONFIG $IFCONFIG_A_OPT | \
grep "^$NIC:[0-9]" | sed 's%: .*%%'`;;
*)
j=0
IFLIST=`$IFCONFIG $IFCONFIG_A_OPT | \
grep "^$NIC:[0-9]" | sed 's% .*%%'`
TRYADRCNT=`ls "${NICBASE}:"* 2>/dev/null | wc -w | tr -d ' '`
if [ -f "${NICBASE}:${TRYADRCNT}" ]; then
: OK
else
j="${TRYADRCNT}"
fi
;;
esac
IFLIST=" `echo $IFLIST` "
while
[ $j -lt 512 ]
do
case $IFLIST in
*" "$NIC:$j" "*)
;;
*)
NICLINK="$NICBASE:$j"
if
ln "$NICBASE" "$NICLINK" 2>/dev/null
then
echo "$NIC:$j"
return $OCF_SUCCESS
fi
;;
esac
j=`expr $j + 1`
done
return $OCF_ERR_GENERIC
}
delete_route () {
ipaddr="$1"
case "$SYSTYPE" in
SunOS) return 0;;
*BSD) CMD="$ROUTE -n delete -host $ipaddr";;
*) CMD="$ROUTE -n del -host $ipaddr";;
esac
$CMD
return $?
}
delete_interface () {
ifname="$1"
ipaddr="$2"
case "$SYSTYPE" in
SunOS)
if [ "$SYSVERSION" -ge 8 ] ; then
CMD="$IFCONFIG $ifname unplumb"
else
CMD="$IFCONFIG $ifname 0 down"
fi;;
Darwin*)
CMD="$IFCONFIG $ifname $ipaddr delete";;
*BSD)
CMD="$IFCONFIG $ifname inet $ipaddr delete";;
*)
CMD="$IFCONFIG $ifname down";;
esac
ocf_log info "$CMD"
$CMD
return $?
}
add_interface () {
ipaddr="$1"
iface_base="$2"
iface="$3"
netmask="$4"
broadcast="$5"
if [ $# != 5 ]; then
ocf_log err "Insufficient arguments to add_interface: $*"
exit $OCF_ERR_ARGS
fi
case "$SYSTYPE" in
SunOS)
if [ "$SYSVERSION" -ge 8 ] ; then
$IFCONFIG $iface plumb
rc=$?
if [ $rc -ne 0 ] ; then
echo "ERROR: '$IFCONFIG $iface plumb' failed."
return $rc
fi
fi
# At Solaris 10, this single-command version sometimes broke.
# Almost certainly an S10 bug.
# CMD="$IFCONFIG $iface inet $ipaddr $text up"
# So hack the following workaround:
CMD="$IFCONFIG $iface inet $ipaddr"
CMD="$CMD && $IFCONFIG $iface netmask $netmask"
CMD="$CMD && $IFCONFIG $iface up"
;;
*BSD)
# netmask is always set to 255.255.255.255 for an alias
CMD="$IFCONFIG $iface inet $ipaddr netmask 255.255.255.255 alias";;
*)
CMD="$IFCONFIG $iface $ipaddr netmask $netmask broadcast $broadcast";;
esac
# Use "eval $CMD" (not "$CMD"): it might be a chain of two or more commands.
ocf_log info "eval $CMD"
eval $CMD
rc=$?
if [ $rc != 0 ]; then
echo "ERROR: eval $CMD failed (rc=$rc)"
fi
return $rc
}
#
# Remove the IP alias for the requested IP address...
#
ip_stop() {
SENDARPPIDFILE="$SENDARPPIDDIR/send_arp-$OCF_RESKEY_ip"
NIC=`find_interface $OCF_RESKEY_ip`
if [ -f "$SENDARPPIDFILE" ]; then
cat "$SENDARPPIDFILE" | xargs kill
rm -f "$SENDARPPIDFILE"
fi
if [ -z "$NIC" ]; then
: Requested interface not in use
return $OCF_SUCCESS
fi
if [ ${OCF_RESKEY_lvs_support} = 1 ]; then
case $NIC in
lo*)
: Requested interface is on loopback
return $OCF_SUCCESS;;
esac
fi
if [ `$ROUTE -n | grep $OCF_RESKEY_ip` ]; then
delete_route "$OCF_RESKEY_ip"
fi
delete_interface "$NIC" "$OCF_RESKEY_ip"
rc=$?
if [ ${OCF_RESKEY_lvs_support} = 1 ]; then
lvs_restore_loopback "$OCF_RESKEY_ip"
fi
# remove lock file...
rm -f "$VLDIR/IPaddr-$NIC"
if [ $rc != 0 ]; then
ocf_log warn "IP Address $OCF_RESKEY_ip NOT released: rc=$rc"
return $OCF_ERR_GENERIC
fi
return $OCF_SUCCESS
}
#
# Add an IP alias for the requested IP address...
#
# It could be that we already have taken it, in which case it should
# do nothing.
#
ip_start() {
#
# Do we already service this IP address?
#
ip_status_internal
if [ $? = $OCF_SUCCESS ]; then
# Nothing to do, the IP is already active
return $OCF_SUCCESS;
fi
NIC_unique=`find_free_interface $OCF_RESKEY_nic`
if [ -n "$NIC_unique" ]; then
: OK got interface [$NIC_unique] for $OCF_RESKEY_ip
else
return $OCF_ERR_GENERIC
fi
# This logic is mostly to support LVS (If I understand it correctly)
if [ ${OCF_RESKEY_lvs_support} = 1 ]; then
NIC_current=`find_interface $OCF_RESKEY_ip`
case $NIC_unique in
lo*)
if [ x"$NIC_unique" = x"$NIC_current" ]; then
# Its already "running" and not moving, nothing to do.
ocf_log err "Could not find a non-loopback device to move $OCF_RESKEY_ip to"
return $OCF_ERR_GENERIC
fi;;
*) lvs_remove_conflicting_loopback "$OCF_RESKEY_ip" "$NIC_current";;
esac
fi
add_interface "$OCF_RESKEY_ip" "$OCF_RESKEY_nic" "$NIC_unique" \
"$OCF_RESKEY_cidr_netmask" "$OCF_RESKEY_broadcast"
rc=$?
if [ $rc != 0 ]; then
ocf_log err "Could not add $OCF_RESKEY_ip to $OCF_RESKEY_nic: rc=$rc"
return $rc
fi
# The address is active, now notify others about it using sendarp
if [ "$SYSTYPE" = "DarwinBSD" -a "$NIC_unique" = "lo0" ]; then
# Darwin can't send ARPs on loopback devices
SENDARP="x$SENDARP" # Prevent the binary from being found
fi
if [ -x $SENDARP ]; then
TARGET_INTERFACE=`echo $NIC_unique | sed 's%:.*%%'`
SENDARPPIDFILE="$SENDARPPIDDIR/send_arp-$OCF_RESKEY_ip"
ARGS="-i $OCF_RESKEY_ARP_INTERVAL_MS -r $OCF_RESKEY_ARP_REPEAT"
ARGS="$ARGS -p $SENDARPPIDFILE $TARGET_INTERFACE $OCF_RESKEY_ip"
ARGS="$ARGS auto $OCF_RESKEY_ip $OCF_RESKEY_ARP_NETMASK"
ocf_log debug "Sending Gratuitous Arp for $OCF_RESKEY_ip on $NIC_unique [$TARGET_INTERFACE]"
case $OCF_RESKEY_ARP_BACKGROUND in
yes) ($SENDARP $ARGS || ocf_log err "Could not send gratuitous arps. rc=$?" & ) >&2 ;;
*) $SENDARP $ARGS || ocf_log err "Could not send gratuitous arps. rc=$?";;
esac
fi
ip_status_internal
return $?
}
ip_status_internal() {
NIC=`find_interface "$OCF_RESKEY_ip"`
if [ "x$NIC" = x ]; then
return $OCF_NOT_RUNNING
elif [ "${OCF_RESKEY_lvs_support}" = "1" ]; then
case $NIC in
lo*) return $OCF_NOT_RUNNING;;
*) return $OCF_SUCCESS;;
esac
else
if [ x$OCF_RESKEY_nic != x ]; then
simple_OCF_NIC=`echo $OCF_RESKEY_nic | awk -F: '{print $1}'`
simple_NIC=`echo $NIC | awk -F: '{print $1}'`
if [ $simple_OCF_NIC != $simple_NIC ]; then
ocf_log err "$OCF_RESKEY_ip is running an interface ($simple_NIC) instead of the configured one ($simple_OCF_NIC)"
return $OCF_ERR_GENERIC
fi
fi
return $OCF_SUCCESS
fi
}
ip_status() {
ip_status_internal
rc=$?
if [ $rc = $OCF_SUCCESS ]; then
echo "running"
elif [ $rc = $OCF_NOT_RUNNING ]; then
echo "stopped"
else
echo "unknown"
fi
return $rc;
}
#
# Determine if this IP address is really being served, or not.
# Note that we must distinguish if *we're* serving it locally...
#
ip_monitor() {
ip_status_internal
rc=$?
if [ $OCF_CHECK_LEVEL = 0 -o $rc != 0 ]; then
return $rc
fi
ocf_log info "Checking IP stack"
PINGARGS="`pingargs $OCF_RESKEY_ip`"
for j in 1 2 3 4 5 6 7 8 9 10; do
MSG=`$PING $PINGARGS 2>&1`
if [ $? = 0 ]; then
return $OCF_SUCCESS
fi
done
ocf_log err "$MSG"
return $OCF_ERR_GENERIC
}
is_positive_integer() {
ocf_is_decimal $1 && [ $1 -ge 1 ]
if [ $? = 0 ]; then
return 1
fi
return 0
}
ip_validate_all() {
: ${OCF_RESKEY_ARP_BACKGROUND=yes}
: ${OCF_RESKEY_ARP_NETMASK=ffffffffffff}
: ${OCF_RESKEY_ARP_INTERVAL_MS=500}
: ${OCF_RESKEY_ARP_REPEAT=10}
check_binary $AWK
check_binary $IFCONFIG
check_binary $ROUTE
check_binary $PING
if is_positive_integer $OCF_RESKEY_ARP_INTERVAL_MS
then
ocf_log err "Invalid parameter value: ARP_INTERVAL_MS [$OCF_RESKEY_ARP_INTERVAL_MS]"
return $OCF_ERR_ARGS
fi
if is_positive_integer $OCF_RESKEY_ARP_REPEAT
then
ocf_log err "Invalid parameter value: ARP_REPEAT [$OCF_RESKEY_ARP_REPEAT]"
return $OCF_ERR_ARGS
fi
: ${OCF_RESKEY_lvs_support=0}
if [ "$SYSTYPE" = "Linux" -o "$SYSTYPE" = "SunOS" ]; then
:
else
if [ "${OCF_RESKEY_lvs_support}" = "1" ]; then
ocf_log err "$SYSTYPE does not support LVS"
return $OCF_ERR_GENERIC
fi
fi
case $OCF_RESKEY_ip in
"") ocf_log err "Required parameter OCF_RESKEY_ip is missing"
return $OCF_ERR_CONFIGURED;;
[0-9]*.[0-9]*.[0-9]*.*[0-9]) : OK;;
*) ocf_log err "Parameter OCF_RESKEY_ip [$OCF_RESKEY_ip] not an IP address"
return $OCF_ERR_CONFIGURED;;
esac
# Unconditionally do this?
case $OCF_RESKEY_nic in
*:*)
OCF_RESKEY_nic=`echo $OCF_RESKEY_nic | sed 's/:.*//'`
;;
esac
NICINFO=`$FINDIF`
rc=$?
if [ $rc != 0 ]; then
ocf_log err "$FINDIF failed [rc=$rc]."
return $OCF_ERR_GENERIC
fi
tmp=`echo "$NICINFO" | cut -f1`
if
[ "x$OCF_RESKEY_nic" = "x" ]
then
ocf_log info "Using calculated nic for ${OCF_RESKEY_ip}: $tmp"
OCF_RESKEY_nic=$tmp
elif
[ x$tmp != x${OCF_RESKEY_nic} ]
then
ocf_log err "Invalid parameter value: nic [$OCF_RESKEY_nic] Calculated nic: [$tmp]"
return $OCF_ERR_ARGS
fi
tmp=`echo "$NICINFO" | cut -f2 | cut -d ' ' -f2`
if
[ "x$OCF_RESKEY_cidr_netmask" != "x$tmp" ]
then
ocf_log info "Using calculated netmask for ${OCF_RESKEY_ip}: $tmp"
fi
# Always use the calculated version becuase it might have been specified
# using CIDR notation which not every system accepts
OCF_RESKEY_netmask=$tmp
OCF_RESKEY_cidr_netmask=$tmp; export OCF_RESKEY_cidr_netmask
tmp=`echo "$NICINFO" | cut -f3 | cut -d ' ' -f2`
if
[ "x$OCF_RESKEY_broadcast" = "x" ]
then
ocf_log debug "Using calculated broadcast for ${OCF_RESKEY_ip}: $tmp"
OCF_RESKEY_broadcast=$tmp
elif [ x$tmp != x${OCF_RESKEY_broadcast} ]; then
ocf_log err "Invalid parameter value: broadcast [$OCF_RESKEY_broadcast] Calculated broadcast: [$tmp]"
return $OCF_ERR_ARGS
fi
return $OCF_SUCCESS
}
usage() {
echo $USAGE >&2
return $1
}
if [ $# -ne 1 ]; then
usage $OCF_ERR_ARGS
fi
: ${OCF_RESKEY_lvs_support=0}
# Normalize the value of lvs_support
if [ "${OCF_RESKEY_lvs_support}" = "true" \
-o "${OCF_RESKEY_lvs_support}" = "on" \
-o "${OCF_RESKEY_lvs_support}" = "yes" \
-o "${OCF_RESKEY_lvs_support}" = "1" ]; then
OCF_RESKEY_lvs_support=1
else
OCF_RESKEY_lvs_support=0
fi
# Note: We had a version out there for a while which used
# netmask instead of cidr_netmask. So, don't remove this aliasing code!
if
[ ! -z "$OCF_RESKEY_netmask" -a -z "$OCF_RESKEY_cidr_netmask" ]
then
OCF_RESKEY_cidr_netmask=$OCF_RESKEY_netmask
export OCF_RESKEY_cidr_netmask
fi
case $1 in
meta-data) meta_data;;
start) ip_validate_all && ip_start;;
stop) ip_stop;;
status) ip_status;;
monitor) ip_monitor;;
validate-all) ip_validate_all;;
usage) usage $OCF_SUCCESS;;
*) usage $OCF_ERR_UNIMPLEMENTED;;
esac
exit $?
|