mgetty-fax 1.1.36-3.1 / usr / bin / faxspool

#!/bin/bash
#
# faxspool - sample script how to spool fax input data to a spool
#            directory, creating jobs to be run by faxrunq
#
# sccsid: $Id: faxspool.in,v 4.33 2006/12/07 15:16:31 gert Exp $ (c) Gert Doering
#
# syntax: faxspool [flags] <phone-number> <job(s)>
#
# <job(s)> may be any number of files. The file type has to be guessed -
# for now, the following file extensions are recognized:
#
#   .ps  -> PostScript
#   .t   -> plain ascii text
#   .dvi -> TeX device independent output file (use dvips, then like .ps)
#   .pbm -> PortableBitMap (use pbm2g3)
#   .pgm -> PortableGrayMap (use pgmtopbm | pbm2g3)
#   .ppm -> PortablePixMap (use ppmtopgm | pgmtopbm | pbm2g3)
#   .g3  -> raw G3 fax data
#   .lj  -> HP Laserjet PCL4 (use hp2pbm)
#   .xwd -> xwindow-dump (by xwd program, use xwdtopnm)
#
# ChangeLog:
#  3.6.93: use dvips instead of dvialw now (GD)
# 15.9.93: use g3cat to concatenate header and page (GD)
#  3.10.93: use "hp2hig3" for hp-pcl4-files (cl)
# 19.10.93: phone directories (caz)
# $Log: faxspool.in,v $
# Revision 4.33  2006/12/07 15:16:31  gert
# new sequence for fax header: @S@ - print job number (F000123)
#
# Revision 4.32  2006/09/26 09:05:30  gert
# giftoppm is nowadays called giftopnm...
#
# Revision 4.31  2005/02/24 16:28:26  gert
# fix whole user/USER mess
#   - drop $USER.  $user is only used for fax header substitution now.
#   - mail (-f) is in $mail_to
#   - only forced user name (-u/$force_user) is put into $JOB.q
#
# Revision 4.30  2004/11/14 13:14:08  gert
# change test -x to -r for $HOME/.make.coverpg (mode r-- = no coverpage)
#
# Revision 4.29  2004/11/13 22:35:54  gert
# test for $HOME/.make.coverpg with "-x"
# if spooling from stdin ("-"), don't test for "size > 0" (-s) - breaks stuff
#
# Revision 4.28  2004/07/17 10:17:49  gert
# per-user coverpg and faxheader files (Andreas Barth)
#
# Revision 4.27  2004/02/05 17:39:44  gert
# call "(umask 077 ; mkdir)" in a sub-shell: saves the need to save/restore umask
#
# Revision 4.26  2003/10/09 12:40:16  gert
# refuse empty (0 bytes) input files
#
# Revision 4.25  2003/06/28 20:44:04  gert
# reset umask after creating temp directory
#
# Revision 4.24  2003/04/09 21:05:14  gert
# fix case of "faxing without header" (-h -) - wasn't copying G3 files
#
# Revision 4.23  2003/01/21 13:27:12  gert
# abort if input file names contain whitespace or quote characters
#
# Revision 4.22  2002/11/23 15:14:57  gert
# revert 4.14 -> 4.15 change: faxqueue_done is now back in $FAX_SPOOL_OUT
# (new permission concept, faxrunq/faxrunqd no longer running as root)
#
# Revision 4.21  2002/11/19 10:08:39  gert
# do not check + mkdir $FAX_SPOOL_OUT/ anymore (faxq-helper does this)
# do not write to $FAX_SPOOL_OUT/<subdir> directly anymore - create G3 files
# in $TMP/<subdir>/, use faxq-helper to copy them to fax queue.
# same applies to .source-files/$b - copy via faxq-helper
#
# Revision 4.20  2002/11/17 22:06:18  gert
# FAX_ALLOW + FAX_DENY moved to fax-helper
#
# Revision 4.19  2002/11/16 22:21:36  gert
# initial adaptions for faxq-helper
#
# Revision 4.18  2000/10/11 10:06:41  gert
# fix combination of "copy_sorce" and "faxspool.rules" (command line destroyed)
#
# Revision 4.17  2000/08/06 18:06:21  gert
# make wording of success message clearer for -t <hh:mm> case
#
# Revision 4.16  2000/08/06 18:02:13  gert
# support PDF input files (via acroread)
#
# Revision 4.15  2000/08/06 14:28:37  gert
# go from using $fax_spool_out/.last_run to VARRUNDIR/faxqueue_done
#
# Revision 4.14  2000/07/18 20:18:44  gert
# allow W and w in phone number
#
# Revision 4.13  1999/06/29 13:19:45  gert
# rename faxspool.filter to faxspool.rules - 14-char limit!
#
# Revision 4.12  1999/05/27 14:49:09  gert
# lookup file extention in "faxspool.filter" if built-in list doesn't find it
#
# Revision 4.11  1999/05/27 13:48:55  gert
# implement handling of external conversion programs (input to G3)
#

FAX_SPOOL=/var/spool/fax
FAX_SPOOL_OUT=/var/spool/fax/outgoing
FAX_SEQ=$FAX_SPOOL_OUT/.Sequence
FAX_SEQ_LOCKDIR=/var/lock/fax
FAX_SEQ_LOCK=$FAX_SEQ_LOCKDIR/LCK..seq
LAST_RUN=/var/spool/fax/outgoing/faxqueue_done

# helper program for privileged queue access
FAXQ_HELPER=/usr/lib/mgetty-fax/faxq-helper

# fax phone directories - format: <alias> <fax phone number>
GLOBAL_PHONE_DIR=/etc/mgetty/faxaliases
PRIVATE_PHONE_DIR=$HOME/.faxnrs

# you have to adapt this to your local system!
#
# this is the file with the fax header - @T@ / @P@ / @M@ / @U@ stand for
# telephone / page number / maximum page number / user name, respectively
FAX_HEADER=/etc/mgetty/faxheader
#
# for creating the fax page header, pbmtext is used, and this specifies
# the font file to use (fine/normal res.)
PBMFONT_HEADER_F=/usr/lib/mgetty-fax/cour25.pbm
PBMFONT_HEADER_N=/usr/lib/mgetty-fax/cour25n.pbm
#
# if you want to use pbmtext for converting ASCII texts, use these fonts:
PBMFONT_BODY_F=/usr/lib/mgetty-fax/cour25.pbm
PBMFONT_BODY_N=/usr/lib/mgetty-fax/cour25n.pbm

#
# this file overrides internal conversion functions
FS_FILTER=/etc/mgetty/faxspool.rules

#
# these are the drivers used in Ghostscript - choose dfaxhig/low or faxg3
#GS_DRIVER_HI="-sDEVICE=dfaxhigh"
#GS_DRIVER_LO="-sDEVICE=dfaxlow"
GS_DRIVER_HI="-sDEVICE=faxg3 -r204x196"
GS_DRIVER_LO="-sDEVICE=faxg3 -r204x98"

#
# program that will generate fax coverpage (see "man coverpg")
#
MAKE_COVER_PG=/etc/mgetty/make.coverpg

#
# local fax number (will be overriden by "sendfax.config" if set there!)
#
FAX_STATION_ID=" "

#
# echo program that will accept escapes (bash: "echo -e", sun: /usr/5bin/echo)
#
echo="echo -e"

AWK=awk

#
# make sure that pbm2g3 and newslock can be found
#
PATH=/usr/bin:$PATH

#### end of configuration section

# change coverpage/header defaults to per-user files, if $HOME exists
if [ -d "$HOME" ]; then
  if [ -r $HOME/.make.coverpg ]; then
    MAKE_COVER_PG=$HOME/.make.coverpg
  fi
  if [ -r $HOME/.faxheader ]; then
    FAX_HEADER=$HOME/.faxheader
  fi
fi

#
#### shell functions for conversions
#

# naming scheme: fs_cvt_$type()
# converts a $type file ($1) to g3 file(s), named $2.$i, where "i"
# should be the page number. Can be omitted if $1 has only one page.
# $3 can be a flag argument, "-n" for normal resolution

#
# convert portable bitmap (not scaled) - see pbm(5), pbm2g3(1)
#
fs_cvt_pbm()
{
    pbm2g3 "$1" >"$2".001
}

#
# convert portable greymap (not scaled) - see pgm(5)
#
fs_cvt_pgm()
{
    pgmtopbm "$1" | pbm2g3 >"$2".001
}

#
# convert portable pixmap (no scaling) - see ppm(5)
#
fs_cvt_ppm()
{
    ppmtopgm "$1" | pgmtopbm | pbm2g3 >"$2".001
}

#
# "convert" G3 file
# actually, it's just copied, but I want the interface to be the same
# later on, one could do page resizing, resolution changing, ... here
#
fs_cvt_g3()
{
    g3cat "$1" >"$2".001
}

#
# convert a X11 xwd file - scaled to fill the whole page width
# since we do not know whether it's colour or grey or what, we have
# to do *all* the conversions *all* the time - ugly. FIXME.
#

fs_cvt_xwd()
{
    REDUCE="cat"
    test X"$3" = X-n && REDUCE="pnmscale -yscale 0.5"

    xwdtopnm "$1" |\
	pnmscale -xysize 1728 2000 |\
	$REDUCE |\
	ppmtopgm |\
	pgmtopbm |\
	pbm2g3 >"$2".001
}

#
# convert a CompuServe GIF file, also properly scaled
# problem: a GIF file can contain multiple images - FIXME
#

fs_cvt_gif()
{
    REDUCE="cat"
    test X"$3" = X-n && REDUCE="pnmscale -yscale 0.5"

    giftopnm "$1" |\
	pnmscale -xysize 1728 2000 |\
	$REDUCE |\
	ppmtopgm |\
	pgmtopbm |\
	pbm2g3 >"$2".001
}

#
# convert TIFF file
# problem1: conversion always via ppm, pgm
# problem2: multipage TIFFs
#
fs_cvt_tif()
{
    REDUCE="cat"
    test X"$3" = X-n && REDUCE="pnmscale -yscale 0.5"

    tifftopnm "$1" |\
	pnmscale -xysize 1728 2000 |\
	$REDUCE |\
	ppmtopgm |\
	pgmtopbm |\
	pbm2g3 >"$2".001
}

#
# convert HP laserjet input files
# needs Chris Lewis' hp2pbm package (ftp.uunet.ca)
#
fs_cvt_lj()
{
    if [ X"$3" = X-n ]
    then
        hp2log3 -r"$2" <"$1"
    else
        hp2hig3 -r"$2" <"$1"
    fi
}

#
# convert postscript data
# needs GNU GhostScript installed. 
# For driver selection, see definition of GS_DRIVER_{HI,LO} above.
#
fs_cvt_ps()
{
    driver="$GS_DRIVER_HI"
    test X"$3" = X-n && driver="$GS_DRIVER_LO"

    cat "$1" |
	gs $driver -sOutputFile="$2"%03d -dNOPAUSE -q -dSAFER -
}
       
#
# convert ASCII text files
# go via GhostScript and gslp.ps
# (could also used hp2hig3 or nenscript -> gs or pbmtext)
#
fs_cvt_ascii()
{
#####
# via Ghostscript:

    driver="$GS_DRIVER_HI"
    test X"$3" = X-n && driver="$GS_DRIVER_LO"

    gs $driver -sOutputFile="$2"%03d -dNOPAUSE \
			-- gslp.ps -fCourier-Bold10 -B "$1"

#####
# via hp2pbm:
# (convert "LF" to "CR+LF" via awk)

#    pgm=hp2hig3
#    test X"$3" = X-n && pgm=hp2log3
#
#    $AWK '{ printf "%s\r\n", $0 }' "$1" | $pgm -r"$2"

#####
# via pbmtext (not really recommended):
# use the "pgx" program in contrib/ to split pages

## Select appropriate font
#    font=$PBMFONT_BODY_F
#    test X"$3" = X-n && font=$PBMFONT_BODY_N
# Determine how many pages text will be split in to.  Uses default pagelen.
#    nr=`pgx < "$1"`
# Convert each page into a separate G3 file.  Uses default pagelen (60).
#    page=1
#    while [ $page -le $nr ]; do
#	pgx $page < "$1" | pbmtext -font $font | pbm2g3 >"$2".$page
#	page=`expr $page + 1`
#    done
}

#
# convert TeX DVI files
# needs GhostScript and dvips installed.
# alternatively, one could use dvialw.
#
fs_cvt_dvi()
{
    if [ X"$3" = X-n ]
    then 
	driver="$GS_DRIVER_LO" ; dvipscfg="-P dfaxlo"
    else
	driver="$GS_DRIVER_HI" ; dvipscfg="-P dfaxhigh"
    fi

# if you do not have the dfaxlo(w)/dfaxhigh dvips modes configured, 
# remove "$dvipscfg" from the dvips command line below [or configure them!]

    dvips $dvipscfg "$1" -o \
        !"gs $driver -sOutputFile="$2"%03d -dNOPAUSE -dSAFER -q -"

# for those that only have the old "dvialw":
#
#	dvialw <$file |
#	    gs $driver -sOutputFile="$2"%03d -dNOPAUSE -dSAFER -q -

# for those that have dvi2ps and not dvips:
#
#	dvi2ps -r -q $q |
#	    gs $driver -sOutputFile="$2"%03d -dNOPAUSE -dSAFER -q -

}

#
# convert pdf data
# needs GNU GhostScript and Adobe acroread installed.
# For driver selection, see definition of GS_DRIVER_{HI,LO} above.
#
# contributed by mfvm@gmx.de (Michael Fischer v. Mollard)
#
fs_cvt_pdf()
{
    driver="$GS_DRIVER_HI"
    test X"$3" = X-n && driver="$GS_DRIVER_LO"

    cat "$1" |
	gs $driver -sOutputFile="$2"%03d -dNOPAUSE -q -dSAFER -
}


	
#
#### "main" function
#

#
# setup defaults / get values
#

# user name (for fax header only! auth is done by faxq-helper via getuid())
##########
if user=`logname 2>/dev/null`
then :
else
    id=`id`
    user=`expr "$id" : "[^( ]*(\([^)]*\)"`
fi
test -z "$user" && user=$LOGNAME
test -z "$user" && user=$USER
test -z "$user" && user="nobody"

# fax ID (from sendfax.config)
##########
eval ` $AWK '$1=="fax-id" { printf "FAX_STATION_ID=\"%s", $2; \
			    for(i=3;i<=NF;i++) printf " %s", $i; print "\""; }
             $1=="port"   { exit }' /etc/mgetty/sendfax.config 2>/dev/null`

# everything else is initialized empty
##########
force_user=""
mail_to=""
poll_req=""
verbose_to=""
normal_res=""
TIME=""
copy_source=""
job_priority=""

#
# get command line arguments (overriding some of the values above)
##########
#
usage="Usage: $0 [options] [faxphone] [page data]
Options:
\t-p\t\tpoll request
\t-n\t\tnormal resolution
\t-C <pgm>\tset cover page program (\"-\" for none)
\t-D <dest>\tset verbose destination name
\t-F <full name>\tset full name of sender
\t-h <file>\ttext file for page header
\t-f <email>\tset address for status mail
\t-P <n>\t\tset job priority (1=lowest, 9=highest)
\t-c\t\tcopy source files
\t-t <hh:mm>\tset earliest possible send time
\t-t <hh:mm-hh:mm> set time range for sending fax
\t-A <txt>\tspecify free-form accounting information
\t-q\t\tshut up"

while :
do
    case "$1" in
# enable polling
	-p) poll_req=true ; shift
            ;;
# use normal resolution (as opposed to fine resolution)
        -n) normal_res="-n" ; shift
            ;;
# set cover page program to use
	-C) case "$2" in
	    '') $echo "$usage" >&2 ; exit 2 ;;
	    "-") MAKE_COVER_PG="" ;;
	    /*) MAKE_COVER_PG="$2" ;;
	    *) MAKE_COVER_PG=`pwd`/"$2" ;;
	    esac
	    shift ; shift
	    ;;
# set verbose destination address
        -D) case "$2" in
	    '') $echo "$usage" >&2 ; exit 2 ;;
            esac
            verbose_to="$2"
	    shift ; shift
	    ;;
# set verbose origination address ("fullname")
        -F) case "$2" in
	    '') $echo "$usage" >&2 ; exit 2 ;;
            esac
            FULLNAME="$2"
	    shift ; shift
	    ;;
# set job priority (1=lowest, 9=highest)
        -P) case "$2" in
	    [1-9]) ;;
	    *) $echo "$usage" >&2 ; exit 2 ;;
            esac
            job_priority="$2"
	    shift ; shift
	    ;;
# set page header text file
	-h) case "$2" in
	    '') $echo "$usage" >&2 ; exit 2 ;;
	    '-') FAX_HEADER="" ;;
	    /*) FAX_HEADER="$2" ;;
	    *) FAX_HEADER=`pwd`/"$2" ;;
	    esac
	    test ! -z "$FAX_HEADER" && \
	      if [ ! -f "$FAX_HEADER" ] ; then
		$echo "$0: no such fax header file: '$2'" >&2
		exit 2;
	    fi
	    shift ; shift
	    ;;
# set e-mail return address
	-f) case "$2" in
	    '') $echo "$usage" >&2 ; exit 2 ;;
            esac
	    mail_to="$2"
	    shift ; shift
	    ;;
# force user name (faxq-helper will verify "trusted" users)
	-u) case "$2" in
	    '') $echo "$usage" >&2 ; exit 2 ;;
            esac
	    force_user="$2"
	    shift ; shift
	    ;;
# set first time to send fax
	-t) if expr "$2" : "[0-2][0-9]:[0-9][0-9]$" >/dev/null
	    then
		h=`expr "$2" : "\(..\)"`
		m=`expr "$2" : "..:\(..\)"`
		if [ "$h" -gt 23 -o "$m" -gt 60 ]
		then
		    $echo "Invalid time specified: $h:$m" >&2; exit 2
		fi
		TIME="$h$m"
	    else
		$echo "Time must be in <hh:mm> format." >&2; exit 2
	    fi
	    shift ; shift
	    ;;
# set accounting handle (just a string that will be logged)
       -A) case "$2" in
           '') $echo "$usage" >&2 ; exit 2 ;;
	   esac
           ACCT_HANDLE="$2" ; shift ; shift
	   ;;
# shut up
       -q) exec >/dev/null ; shift
           ;;
# copy source file (for "some action" when transmission fails)
       -c) copy_source=TRUE; shift
	   ;;
# unknown options
       -*) $echo "unknown option: $1" >&2
           $echo "$usage" >&2
	   exit 1
	   ;;
# anything else: leave loop	
	*) break
    esac
done

#
# if not yet set, get full name from /etc/passwd (name only)
#
if [ -z "$FULLNAME" ]
then
    FULLNAME=`grep "^$user:" /etc/passwd | cut -f5 -d: | cut -f1 -d,`
fi

#
# check syntax
#

if [ $# -eq 0 ] ; then
    $echo "$0: phone number missing" >&2
    $echo "$usage" >&2
    exit 3
fi

phone="$1" ; shift
if expr "$phone" : "[-0-9TtPpWw,;]*$" >/dev/null ; then :
else
    alias="$phone"
    phone=""
    awkpgm='$1 == "'"$alias"'" { printf "phone=\"%s\"; vto=\"", $2;
                                 for ( i=3; i<=NF-1; i++ ) printf "%s ",$i;
				 printf "%s\"\n", $i; exit }'
    if [ -r $PRIVATE_PHONE_DIR ]
    then
	eval `$AWK "$awkpgm" $PRIVATE_PHONE_DIR`
    fi
    if [ -z "$phone" -a -r $GLOBAL_PHONE_DIR ]
    then
	eval `$AWK "$awkpgm" $GLOBAL_PHONE_DIR`
    fi
    if [ -z "$phone" ]
    then
	$echo "$0:\nNon-numeric characters in phone number and" >&2
	$echo "'$alias' not found in fax directories\n$usage" >&2
	exit 4
    fi

    [ -z "$verbose_to" ] && verbose_to="$vto"
    [ -z "$verbose_to" ] && verbose_to="$alias"

    $echo "sending fax to '$verbose_to' using phone number '$phone'..."
fi

#
# check, if all the file names are "clean", that the files exist & are readable
#

for file
do
    if [ `echo "$file" | tr -d ' \011\012\015\047\140"' ` != "$file" ]
    then
	$echo "$0: invalid characters in file name '$file'!" >&2 ; exit 5
    fi
    if [ ! -r $file -a x$file != x- ]
    then
	$echo "$0: cannot open '$file'!" >&2 ; exit 5
    fi
    if [ ! -s $file -a x$file != x- ]
    then
	$echo "$0: input file '$file' is empty (0 bytes)!" >&2 ; exit 5
    fi
done

#
# if no file specified on command line, use stdin
# (only if not polling and no cover page)
#

if [ $# -eq 0 -a -z "$poll_req" -a -z "$MAKE_COVER_PG" ]
then
    # if stdin is connected to a tty, notify user
    #
    tty -s && \
	$echo "spooling text from standard input. End typing with ^D" >&2
    set -- -
fi


#
# get unique directory name, using faxq-helper
#
new_seq=`$FAXQ_HELPER new`

if [ -z "$new_seq" ] ; then
    $echo "can't create new job directory, give up" >&2 ; exit 6
fi

#
# mkdir a directory in $TMP (or /tmp), convert input to G3 in there
#
spooldir=`mktemp -t -d`

if [ $? -eq 0 ]; then
    $echo "spooling to $spooldir (->$new_seq)..."
else
    $echo "ERROR: can't create work dir '$spooldir', giving up" >&2 ; exit 6
fi

#
# process all input files
#
input_data="$*"
F_NO=0001

for file
do
#
# if filename is "-", use stdin
#
    if [ x$file = x- ]
    then
	file=`mktemp /tmp/faxspool.XXXXXXXXX`
	if test -z $file
	then
		$echo "ERROR: can't create work file, giving up" >&2 ; exit 6
	fi
	trap "rm $file" 0
	cat - >$file
    else
	$echo "spooling $file..."
    fi

    format=""

#
# try to determine file type by extention (won't work for print spooler!)
#
    case $file in
	*.g3)	format="g3" ;;
	*.ps)	format="ps" ;;
	*.pdf)	format="pdf" ;;
	*alw)	format="ps" ;;
	*.dvi)	format="dvi";;
	*.pbm)	format="pbm";;
	*.pgm)	format="pgm";;
	*.ppm)	format="ppm";;
	*.t)	format="ascii";;
	*.txt)	format="ascii";;
	*.asc)	format="ascii";;
	*.lj)   format="lj" ;;
	*.pcl)  format="lj" ;;
	*.xwd)	format="xwd";;
	*.gif)	format="gif";;
	*.tif)	format="tif";;
	*.tiff)	format="tif";;
    esac

# if we don't know the file type now, let's look for some more
# extentions in the filter configuration file
    if [ -z "$format" -a -f $FS_FILTER ]
    then
	format=`$AWK ' BEGIN { f="'"$file"'"; sub( /^.*\./, "", f ); }
                   $1 == "SUFFIX" && $2 == "."f { print $3; exit }' $FS_FILTER`
    fi

# if we don't know the file type now, let's try something more esoteric

    if [ -z "$format" ]
    then
#
# ask "file"
# (extend /etc/magic if necessary!)
#
	case "`LANG=C file $file | cut -d':' -f2- `" in
	    *"nglish text"*)	format="ascii" ;;
	    *"ascii text"*)	format="ascii" ;;
	    *"ASCII text"*)	format="ascii" ;;
	    *"ews text"*)	format="ascii" ;;
	    *"ail text"*)	format="ascii" ;;
	    *"commands text"*)	format="ascii" ;;
	    *"c program text"*)	format="ascii" ;;
	    *"script text"*)	format="ascii" ;;
	    *PBM*)		format="pbm" ;;
	    *PGM*)		format="pgm" ;;
	    *PPM*)		format="ppm" ;;
	    *GIF*)		format="gif" ;;
	    *Digifax*)	format="g3" ;;
	    *DVI*)	format="dvi" ;;
	    *PCL*)	format="lj" ;;
	    *postscript*)	format="ps" ;;
	    *PostScript*)	format="ps" ;;
	    *TIF*)		format="tif" ;;
	esac

# if file told us, it's an ascii text, or if we still don't know, try
# looking at the first few bytes (do not use "head", it may break on
# binary data)

	if [ -z "$format" -o "$format" = "ascii" ]
	then
	    case "`dd if=$file bs=1 count=4 2>/dev/null`" in
		%!*)            format="ps" ;;
		%PDF)           format="pdf" ;;
		P1*|P4*)	format="pbm" ;;
		P2*|P5*)	format="pgm" ;;
		P3*|P6*)	format="ppm" ;;
		GIF*)		format="gif" ;;	# hmmm.
	    	II*)		format="tif" ;;
		MM*)		format="tif" ;;
	    esac
	fi
#
# detect dvi by directly looking at bytes 16...25
#
	if [ -z "$format" ]
	then
	    if [ "`dd if=$file bs=1 skip=16 count=11 2>/dev/null`" \
	         = "TeX output " ]
	    then
	        format="dvi"
	    fi
	fi
    fi

#
# ok, now we should *really* know what the file type is.
#
    if [ -z "$format" ] ; then
	$echo "$file: cannot determine file format (extend source)" >&2
#
# if stdin is a tty, ask the user for the file type
#
        if tty -s
	then
	    $echo "$file: please enter type: " >&2
	    read format
	else
	    exit 7
	fi
    fi

    $echo "$file is format: $format"

    target=$spooldir/i-$F_NO-

    # get & use external filter command (if set)
    filter=`$AWK '$1 == "FILTER" && $2 == "'"$format$normal_res"'" \
		    { $1=""; $2=""; print; exit; }' $FS_FILTER 2>/dev/null`
	
    if [ -n "$filter" ] 
    then
	$echo "calling external filter:\n$filter\n";
	set -- $file $target $normal_res
	eval "$filter"
    else
	case $format in
	    ps | ascii | pbm | pgm | ppm |\
	    g3 | dvi   | lj  | xwd | gif | tif | pdf) 
		    fs_cvt_$format $file $target $normal_res
		    ;;    
	    *) $echo "$0: no internal filter for format '$format!' found" >&2 
               exit 8 ;;
	esac 
    fi

    if [ $? -ne 0 ] 
    then
	$echo "\n$0: error spooling \"$file\" - aborting!" >&2 ; exit 8
    fi

    # next temporary file number (using awk 'cause expr can't do "%04d"!)
    F_NO=`echo $F_NO | $AWK '{ printf "%04d", $1 + 1 }' -`
done

#
# copy source files over (if requested)
#
if [ ! -z "$copy_source" ] ; then
    $echo "\nCopy source files (for printing, if faxing fails)..."
    for file in $input_data
    do
	b=`basename $file`
	$FAXQ_HELPER input $new_seq .source-files/$b <$file
    done
fi

#
# OK, all files are in the target directory now...
#
# Now let's create the work file
#

job=$spooldir/JOB

#
# conversion complete. Post-process G3 files
#

pages=`ls $spooldir | sed '/^\./d'`
#
# get list / number of pages
#
cd $spooldir

nr=0
maxnr=`echo $pages | wc -w | tr -d " "`

#
# generate cover page
#
# dispose arguments (-C "pgm args")
PGM=`expr "$MAKE_COVER_PG" : "\([^ 	]*\)"`
#
if [ ! -z "$PGM" ] 
  then
  if [ -x "$PGM" ]
  then
    $echo "\nGenerating cover page..."
    export normal_res

    maxnr=`expr $maxnr + 1`
    $MAKE_COVER_PG $maxnr "$FAX_STATION_ID" "$FULLNAME" \
	"$phone" "$verbose_to" "`date +%D`" "`date +%T`" >cover.g3
    if [ -s cover.g3 ]
    then
	pages="cover.g3 $pages"
    else
	$echo "generating cover page failed!" >&2
	maxnr=`expr $maxnr - 1`
    fi
  fi
fi

#	
# concatenate header with pages (optionally) and copy over to spool dir
#
if [ -n "$FAX_HEADER" ]
then
    $echo "\nPutting Header lines on top of pages..."

    hdrfont=$PBMFONT_HEADER_F
    test -z "$normal_res" || hdrfont=$PBMFONT_HEADER_N
fi

finalpg=""
for f in $pages
do
    nr=`expr $nr + 1`

    if [ -n "$FAX_HEADER" ]
    then
	cat $FAX_HEADER | sed -e "s;@T@;$phone;g" -e "s;@P@;$nr;g" \
			      -e "s;@M@;$maxnr;g" -e "s;@U@;$user;g" \
			      -e "s;@N@;$FULLNAME;g" \
			      -e "s;@D@;$verbose_to;g" \
			      -e "s;@ID@;$FAX_STATION_ID;g" \
			      -e "s;@S@;$new_seq;g" \
			      -e "s;@DATE@;`date`;g" \
	| pbmtext -font $hdrfont | pbm2g3 \
	| g3cat - $f | \
	$FAXQ_HELPER input $new_seq f$nr.g3 \
	&& rm $f
    else
	g3cat $f | \
	$FAXQ_HELPER input $new_seq f$nr.g3 \
	&& rm $f
    fi
    finalpg="$finalpg f$nr.g3"
done

if [ -z "$finalpg" -a -z "$poll_req" ]
then
    $echo "\nnothing to do (no cover page, no data)." >&2
    cd $FAX_SPOOL_OUT
    rmdir $spooldir
    exit 52
fi

#
# final step: create JOB file
#
$echo "phone $phone" >$job.q

[ -z "$force_user" ] || \
    $echo "user $force_user" >>$job.q

[ -z "$mail_to" ] || \
    $echo "mail $mail_to" >>$job.q

$echo "input $input_data" >>$job.q
$echo "pages " $finalpg >>$job.q

[ -z "$verbose_to" ] || \
    $echo "verbose_to $verbose_to" >>$job.q

[ -z "$poll_req" ] || \
    $echo "poll" >>$job.q

[ -z "$normal_res" ] || \
    $echo "normal_res" >>$job.q

[ -z "$job_priority" ] || \
    $echo "priority $job_priority" >>$job.q

[ -z "$TIME" ] || \
    $echo "time $TIME" >>$job.q

[ -z "$ACCT_HANDLE" ] || \
    $echo "acct_handle $ACCT_HANDLE" >>$job.q

$FAXQ_HELPER activate $new_seq < $job.q || exit 99

# clean up
rm $job.q
cd ..
rmdir $spooldir

if [ -z "`find $LAST_RUN -ctime -1 -print 2>/dev/null`" ]
then
    cat <<HERE

Fax queued successfully.

WARNING: faxrunq hasn't been run in the last 24 hours.
         Faxes only get sent out when faxrunq runs! Contact Fax administrator.

HERE
else
    if  [ -z "$TIME" ] ; then
	$echo "\nFax queued successfully. Will be sent at next \`\`faxrunq'' run.\n"
    else
	$echo "\nFax queued successfully. Will be sent at first \`\`faxrunq'' run\nafter the specified send time '$TIME' has been reached\n."
    fi
fi