libvtk7-dev 7.1.1+dfsg1-2 / usr / include / vtk-7.1 / vtkDelaunay3D.h

/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkDelaunay3D.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
/**
 * @class   vtkDelaunay3D
 * @brief   create 3D Delaunay triangulation of input points
 *
 * vtkDelaunay3D is a filter that constructs a 3D Delaunay
 * triangulation from a list of input points. These points may be
 * represented by any dataset of type vtkPointSet and subclasses. The
 * output of the filter is an unstructured grid dataset. Usually the
 * output is a tetrahedral mesh, but if a non-zero alpha distance
 * value is specified (called the "alpha" value), then only tetrahedra,
 * triangles, edges, and vertices laying within the alpha radius are
 * output. In other words, non-zero alpha values may result in arbitrary
 * combinations of tetrahedra, triangles, lines, and vertices. (The notion
 * of alpha value is derived from Edelsbrunner's work on "alpha shapes".)
 * Note that a modification to alpha shapes enables output of combinations
 * of tetrahedra, triangles, lines, and/or verts (see the boolean ivars
 * AlphaTets, AlphaTris, AlphaLines, AlphaVerts).
 *
 * The 3D Delaunay triangulation is defined as the triangulation that
 * satisfies the Delaunay criterion for n-dimensional simplexes (in
 * this case n=3 and the simplexes are tetrahedra). This criterion
 * states that a circumsphere of each simplex in a triangulation
 * contains only the n+1 defining points of the simplex. (See text for
 * more information.) While in two dimensions this translates into an
 * "optimal" triangulation, this is not true in 3D, since a measurement
 * for optimality in 3D is not agreed on.
 *
 * Delaunay triangulations are used to build topological structures
 * from unorganized (or unstructured) points. The input to this filter
 * is a list of points specified in 3D. (If you wish to create 2D
 * triangulations see vtkDelaunay2D.) The output is an unstructured grid.
 *
 * The Delaunay triangulation can be numerically sensitive. To prevent
 * problems, try to avoid injecting points that will result in
 * triangles with bad aspect ratios (1000:1 or greater). In practice
 * this means inserting points that are "widely dispersed", and
 * enables smooth transition of triangle sizes throughout the
 * mesh. (You may even want to add extra points to create a better
 * point distribution.) If numerical problems are present, you will
 * see a warning message to this effect at the end of the
 * triangulation process.
 *
 * @warning
 * Points arranged on a regular lattice (termed degenerate cases) can be
 * triangulated in more than one way (at least according to the Delaunay
 * criterion). The choice of triangulation (as implemented by
 * this algorithm) depends on the order of the input points. The first four
 * points will form a tetrahedron; other degenerate points (relative to this
 * initial tetrahedron) will not break it.
 *
 * @warning
 * Points that are coincident (or nearly so) may be discarded by the
 * algorithm.  This is because the Delaunay triangulation requires
 * unique input points.  You can control the definition of coincidence
 * with the "Tolerance" instance variable.
 *
 * @warning
 * The output of the Delaunay triangulation is supposedly a convex hull. In
 * certain cases this implementation may not generate the convex hull. This
 * behavior can be controlled by the Offset instance variable. Offset is a
 * multiplier used to control the size of the initial triangulation. The
 * larger the offset value, the more likely you will generate a convex hull;
 * and the more likely you are to see numerical problems.
 *
 * @warning
 * The implementation of this algorithm varies from the 2D Delaunay
 * algorithm (i.e., vtkDelaunay2D) in an important way. When points are
 * injected into the triangulation, the search for the enclosing tetrahedron
 * is quite different. In the 3D case, the closest previously inserted point
 * point is found, and then the connected tetrahedra are searched to find
 * the containing one. (In 2D, a "walk" towards the enclosing triangle is
 * performed.) If the triangulation is Delaunay, then an enclosing tetrahedron
 * will be found. However, in degenerate cases an enclosing tetrahedron may
 * not be found and the point will be rejected.
 *
 * @sa
 * vtkDelaunay2D vtkGaussianSplatter vtkUnstructuredGrid
*/

#ifndef vtkDelaunay3D_h
#define vtkDelaunay3D_h

#include "vtkFiltersCoreModule.h" // For export macro
#include "vtkUnstructuredGridAlgorithm.h"

class vtkIdList;
class vtkPointLocator;
class vtkPointSet;
class vtkPoints;
class vtkTetraArray;
class vtkIncrementalPointLocator;

class VTKFILTERSCORE_EXPORT vtkDelaunay3D : public vtkUnstructuredGridAlgorithm
{
public:
  vtkTypeMacro(vtkDelaunay3D,vtkUnstructuredGridAlgorithm);
  void PrintSelf(ostream& os, vtkIndent indent) VTK_OVERRIDE;

  /**
   * Construct object with Alpha = 0.0; Tolerance = 0.001; Offset = 2.5;
   * BoundingTriangulation turned off.
   */
  static vtkDelaunay3D *New();

  //@{
  /**
   * Specify alpha (or distance) value to control output of this filter.  For
   * a non-zero alpha value, only verts, edges, faces, or tetra contained
   * within the circumsphere (of radius alpha) will be output. Otherwise,
   * only tetrahedra will be output. Note that the flags AlphaTets, AlphaTris,
   * AlphaLines, and AlphaVerts control whether these primitives are output
   * when Alpha is non-zero. (By default all tets, triangles, lines and verts
   * satisfying the alpha shape criterion are output.)
   */
  vtkSetClampMacro(Alpha,double,0.0,VTK_DOUBLE_MAX);
  vtkGetMacro(Alpha,double);
  //@}

  //@{
  /**
   * Boolean controls whether tetrahedra are output for non-zero alpha values.
   */
  vtkSetMacro(AlphaTets,int);
  vtkGetMacro(AlphaTets,int);
  vtkBooleanMacro(AlphaTets,int);
  //@}

  //@{
  /**
   * Boolean controls whether triangles are output for non-zero alpha values.
   */
  vtkSetMacro(AlphaTris,int);
  vtkGetMacro(AlphaTris,int);
  vtkBooleanMacro(AlphaTris,int);
  //@}

  //@{
  /**
   * Boolean controls whether lines are output for non-zero alpha values.
   */
  vtkSetMacro(AlphaLines,int);
  vtkGetMacro(AlphaLines,int);
  vtkBooleanMacro(AlphaLines,int);
  //@}

  //@{
  /**
   * Boolean controls whether vertices are output for non-zero alpha values.
   */
  vtkSetMacro(AlphaVerts,int);
  vtkGetMacro(AlphaVerts,int);
  vtkBooleanMacro(AlphaVerts,int);
  //@}

  //@{
  /**
   * Specify a tolerance to control discarding of closely spaced points.
   * This tolerance is specified as a fraction of the diagonal length of
   * the bounding box of the points.
   */
  vtkSetClampMacro(Tolerance,double,0.0,1.0);
  vtkGetMacro(Tolerance,double);
  //@}

  //@{
  /**
   * Specify a multiplier to control the size of the initial, bounding
   * Delaunay triangulation.
   */
  vtkSetClampMacro(Offset,double,2.5,VTK_DOUBLE_MAX);
  vtkGetMacro(Offset,double);
  //@}

  //@{
  /**
   * Boolean controls whether bounding triangulation points (and associated
   * triangles) are included in the output. (These are introduced as an
   * initial triangulation to begin the triangulation process. This feature
   * is nice for debugging output.)
   */
  vtkSetMacro(BoundingTriangulation,int);
  vtkGetMacro(BoundingTriangulation,int);
  vtkBooleanMacro(BoundingTriangulation,int);
  //@}

  //@{
  /**
   * Set / get a spatial locator for merging points. By default,
   * an instance of vtkPointLocator is used.
   */
  void SetLocator(vtkIncrementalPointLocator *locator);
  vtkGetObjectMacro(Locator,vtkIncrementalPointLocator);
  //@}

  /**
   * Create default locator. Used to create one when none is specified. The
   * locator is used to eliminate "coincident" points.
   */
  void CreateDefaultLocator();

  /**
   * This is a helper method used with InsertPoint() to create
   * tetrahedronalizations of points. Its purpose is construct an initial
   * Delaunay triangulation into which to inject other points. You must
   * specify the center of a cubical bounding box and its length, as well
   * as the number of points to insert. The method returns a pointer to
   * an unstructured grid. Use this pointer to manipulate the mesh as
   * necessary. You must delete (with Delete()) the mesh when done.
   * Note: This initialization method places points forming bounding octahedron
   * at the end of the Mesh's point list. That is, InsertPoint() assumes that
   * you will be inserting points between (0,numPtsToInsert-1).
   */
  vtkUnstructuredGrid *InitPointInsertion(double center[3], double length,
                                          vtkIdType numPts, vtkPoints* &pts);

  /**
   * This is a helper method used with InitPointInsertion() to create
   * tetrahedronalizations of points. Its purpose is to inject point at
   * coordinates specified into tetrahedronalization. The point id is an index
   * into the list of points in the mesh structure.  (See
   * vtkDelaunay3D::InitPointInsertion() for more information.)  When you have
   * completed inserting points, traverse the mesh structure to extract desired
   * tetrahedra (or tetra faces and edges).The holeTetras id list lists all the
   * tetrahedra that are deleted (invalid) in the mesh structure.
   */
  void InsertPoint(vtkUnstructuredGrid *Mesh, vtkPoints *points,
                   vtkIdType id, double x[3], vtkIdList *holeTetras);

  /**
   * Invoke this method after all points have been inserted. The purpose of
   * the method is to clean up internal data structures. Note that the
   * (vtkUnstructuredGrid *)Mesh returned from InitPointInsertion() is NOT
   * deleted, you still are responsible for cleaning that up.
   */
  void EndPointInsertion();

  /**
   * Return the MTime also considering the locator.
   */
  vtkMTimeType GetMTime() VTK_OVERRIDE;

  //@{
  /**
   * Set/get the desired precision for the output types. See the documentation
   * for the vtkAlgorithm::DesiredOutputPrecision enum for an explanation of
   * the available precision settings.
   */
  vtkSetMacro(OutputPointsPrecision,int);
  vtkGetMacro(OutputPointsPrecision,int);
  //@}

protected:
  vtkDelaunay3D();
  ~vtkDelaunay3D() VTK_OVERRIDE;

  int RequestData(vtkInformation *, vtkInformationVector **, vtkInformationVector *) VTK_OVERRIDE;

  double Alpha;
  int AlphaTets;
  int AlphaTris;
  int AlphaLines;
  int AlphaVerts;
  double Tolerance;
  int BoundingTriangulation;
  double Offset;
  int OutputPointsPrecision;

  vtkIncrementalPointLocator *Locator;  //help locate points faster

  vtkTetraArray *TetraArray; //used to keep track of circumspheres/neighbors
  int FindTetra(vtkUnstructuredGrid *Mesh, double x[3], vtkIdType tetId,
                int depth);
  int InSphere(double x[3], vtkIdType tetraId);
  void InsertTetra(vtkUnstructuredGrid *Mesh, vtkPoints *pts,
                   vtkIdType tetraId);

  int NumberOfDuplicatePoints; //keep track of bad data
  int NumberOfDegeneracies;

  // Keep track of number of references to points to avoid new/delete calls
  int *References;

  vtkIdType FindEnclosingFaces(double x[3], vtkUnstructuredGrid *Mesh,
                               vtkIdList *tetras, vtkIdList *faces,
                               vtkIncrementalPointLocator *Locator);

  int FillInputPortInformation(int, vtkInformation*) VTK_OVERRIDE;
private: //members added for performance
  vtkIdList *Tetras; //used in InsertPoint
  vtkIdList *Faces;  //used in InsertPoint
  vtkIdList *CheckedTetras; //used by InsertPoint

private:
  vtkDelaunay3D(const vtkDelaunay3D&) VTK_DELETE_FUNCTION;
  void operator=(const vtkDelaunay3D&) VTK_DELETE_FUNCTION;
};

#endif