libvtk6-dev 6.3.0+dfsg1-11build1 / usr / include / vtk-6.3 / vtkDecimatePro.h

/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkDecimatePro.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
// .NAME vtkDecimatePro - reduce the number of triangles in a mesh
// .SECTION Description
// vtkDecimatePro is a filter to reduce the number of triangles in a triangle
// mesh, forming a good approximation to the original geometry. The input to
// vtkDecimatePro is a vtkPolyData object, and only triangles are treated. If
// you desire to decimate polygonal meshes, first triangulate the polygons
// with vtkTriangleFilter object.
//
// The implementation of vtkDecimatePro is similar to the algorithm
// originally described in "Decimation of Triangle Meshes", Proc Siggraph
// `92, with three major differences. First, this algorithm does not
// necessarily preserve the topology of the mesh. Second, it is guaranteed to
// give the a mesh reduction factor specified by the user (as long as certain
// constraints are not set - see Caveats). Third, it is set up generate
// progressive meshes, that is a stream of operations that can be easily
// transmitted and incrementally updated (see Hugues Hoppe's Siggraph '96
// paper on progressive meshes).
//
// The algorithm proceeds as follows. Each vertex in the mesh is classified
// and inserted into a priority queue. The priority is based on the error to
// delete the vertex and retriangulate the hole. Vertices that cannot be
// deleted or triangulated (at this point in the algorithm) are
// skipped. Then, each vertex in the priority queue is processed (i.e.,
// deleted followed by hole triangulation using edge collapse). This
// continues until the priority queue is empty. Next, all remaining vertices
// are processed, and the mesh is split into separate pieces along sharp
// edges or at non-manifold attachment points and reinserted into the
// priority queue. Again, the priority queue is processed until empty. If
// the desired reduction is still not achieved, the remaining vertices are
// split as necessary (in a recursive fashion) so that it is possible to
// eliminate every triangle as necessary.
//
// To use this object, at a minimum you need to specify the ivar
// TargetReduction. The algorithm is guaranteed to generate a reduced mesh
// at this level as long as the following four conditions are met: 1)
// topology modification is allowed (i.e., the ivar PreserveTopology is off);
// 2) mesh splitting is enabled (i.e., the ivar Splitting is on); 3) the
// algorithm is allowed to modify the boundary of the mesh (i.e., the ivar
// BoundaryVertexDeletion is on); and 4) the maximum allowable error (i.e.,
// the ivar MaximumError) is set to VTK_DOUBLE_MAX.  Other important
// parameters to adjust include the FeatureAngle and SplitAngle ivars, since
// these can impact the quality of the final mesh. Also, you can set the
// ivar AccumulateError to force incremental error update and distribution
// to surrounding vertices as each vertex is deleted. The accumulated error
// is a conservative global error bounds and decimation error, but requires
// additional memory and time to compute.

// .SECTION Caveats
// To guarantee a given level of reduction, the ivar PreserveTopology must
// be off; the ivar Splitting is on; the ivar BoundaryVertexDeletion is on;
// and the ivar MaximumError is set to VTK_DOUBLE_MAX.
//
// If PreserveTopology is off, and SplitEdges is off; the mesh topology may
// be modified by closing holes.
//
// Once mesh splitting begins, the feature angle is set to the split angle.

// .SECTION See Also
// vtkDecimate vtkQuadricClustering vtkQuadricDecimation


#ifndef vtkDecimatePro_h
#define vtkDecimatePro_h

#include "vtkFiltersCoreModule.h" // For export macro
#include "vtkPolyDataAlgorithm.h"

#include "vtkCell.h" // Needed for VTK_CELL_SIZE

class vtkDoubleArray;
class vtkPriorityQueue;

class VTKFILTERSCORE_EXPORT vtkDecimatePro : public vtkPolyDataAlgorithm
{
public:
  vtkTypeMacro(vtkDecimatePro,vtkPolyDataAlgorithm);
  void PrintSelf(ostream& os, vtkIndent indent);

  // Description:
  // Create object with specified reduction of 90% and feature angle of
  // 15 degrees. Edge splitting is on, defer splitting is on, and the
  // split angle is 75 degrees. Topology preservation is off, delete
  // boundary vertices is on, and the maximum error is set to
  // VTK_DOUBLE_MAX. The inflection point ratio is 10 and the vertex
  // degree is 25. Error accumulation is turned off.
  static vtkDecimatePro *New();

  // Description:
  // Specify the desired reduction in the total number of polygons (e.g., if
  // TargetReduction is set to 0.9, this filter will try to reduce the data set
  // to 10% of its original size). Because of various constraints, this level of
  // reduction may not be realized. If you want to guarantee a particular
  // reduction, you must turn off PreserveTopology, turn on SplitEdges and
  // BoundaryVertexDeletion, and set the MaximumError to VTK_DOUBLE_MAX (these
  // ivars are initialized this way when the object is instantiated).
  vtkSetClampMacro(TargetReduction,double,0.0,1.0);
  vtkGetMacro(TargetReduction,double);

  // Description:
  // Turn on/off whether to preserve the topology of the original mesh. If
  // on, mesh splitting and hole elimination will not occur. This may limit
  // the maximum reduction that may be achieved.
  vtkSetMacro(PreserveTopology,int);
  vtkGetMacro(PreserveTopology,int);
  vtkBooleanMacro(PreserveTopology,int);

  // Description:
  // Specify the mesh feature angle. This angle is used to define what
  // an edge is (i.e., if the surface normal between two adjacent triangles
  // is >= FeatureAngle, an edge exists).
  vtkSetClampMacro(FeatureAngle,double,0.0,180.0);
  vtkGetMacro(FeatureAngle,double);

  // Description:
  // Turn on/off the splitting of the mesh at corners, along edges, at
  // non-manifold points, or anywhere else a split is required. Turning
  // splitting off will better preserve the original topology of the
  // mesh, but you may not obtain the requested reduction.
  vtkSetMacro(Splitting,int);
  vtkGetMacro(Splitting,int);
  vtkBooleanMacro(Splitting,int);

  // Description:
  // Specify the mesh split angle. This angle is used to control the splitting
  // of the mesh. A split line exists when the surface normals between
  // two edge connected triangles are >= SplitAngle.
  vtkSetClampMacro(SplitAngle,double,0.0,180.0);
  vtkGetMacro(SplitAngle,double);

  // Description:
  // In some cases you may wish to split the mesh prior to algorithm
  // execution. This separates the mesh into semi-planar patches, which are
  // disconnected from each other. This can give superior results in some
  // cases. If the ivar PreSplitMesh ivar is enabled, the mesh is split with
  // the specified SplitAngle. Otherwise mesh splitting is deferred as long
  // as possible.
  vtkSetMacro(PreSplitMesh,int);
  vtkGetMacro(PreSplitMesh,int);
  vtkBooleanMacro(PreSplitMesh,int);

  // Description:
  // Set the largest decimation error that is allowed during the decimation
  // process. This may limit the maximum reduction that may be achieved. The
  // maximum error is specified as a fraction of the maximum length of
  // the input data bounding box.
  vtkSetClampMacro(MaximumError,double,0.0,VTK_DOUBLE_MAX);
  vtkGetMacro(MaximumError,double);

  // Description:
  // The computed error can either be computed directly from the mesh
  // or the error may be accumulated as the mesh is modified. If the error
  // is accumulated, then it represents a global error bounds, and the ivar
  // MaximumError becomes a global bounds on mesh error. Accumulating the
  // error requires extra memory proportional to the number of vertices in
  // the mesh. If AccumulateError is off, then the error is not accumulated.
  vtkSetMacro(AccumulateError,int);
  vtkGetMacro(AccumulateError,int);
  vtkBooleanMacro(AccumulateError,int);

  // Description:
  // The MaximumError is normally defined as a fraction of the dataset bounding
  // diagonal. By setting ErrorIsAbsolute to 1, the error is instead defined
  // as that specified by AbsoluteError. By default ErrorIsAbsolute=0.
  vtkSetMacro(ErrorIsAbsolute,int);
  vtkGetMacro(ErrorIsAbsolute,int);

  // Description:
  // Same as MaximumError, but to be used when ErrorIsAbsolute is 1
  vtkSetClampMacro(AbsoluteError,double,0.0,VTK_DOUBLE_MAX);
  vtkGetMacro(AbsoluteError,double);

  // Description:
  // Turn on/off the deletion of vertices on the boundary of a mesh. This
  // may limit the maximum reduction that may be achieved.
  vtkSetMacro(BoundaryVertexDeletion,int);
  vtkGetMacro(BoundaryVertexDeletion,int);
  vtkBooleanMacro(BoundaryVertexDeletion,int);

  // Description:
  // If the number of triangles connected to a vertex exceeds "Degree", then
  // the vertex will be split. (NOTE: the complexity of the triangulation
  // algorithm is proportional to Degree^2. Setting degree small can improve
  // the performance of the algorithm.)
  vtkSetClampMacro(Degree,int,25,VTK_CELL_SIZE);
  vtkGetMacro(Degree,int);

  // Description:
  // Specify the inflection point ratio. An inflection point occurs
  // when the ratio of reduction error between two iterations is greater
  // than or equal to the InflectionPointRatio.
  vtkSetClampMacro(InflectionPointRatio,double,1.001,VTK_DOUBLE_MAX);
  vtkGetMacro(InflectionPointRatio,double);


  // Description:
  // Get the number of inflection points. Only returns a valid value after
  // the filter has executed.  The values in the list are mesh reduction
  // values at each inflection point. Note: the first inflection point always
  // occurs right before non-planar triangles are decimated (i.e., as the
  // error becomes non-zero).
  vtkIdType GetNumberOfInflectionPoints();

  // Description:
  // Get a list of inflection points. These are double values 0 < r <= 1.0
  // corresponding to reduction level, and there are a total of
  // NumberOfInflectionPoints() values. You must provide an array (of
  // the correct size) into which the inflection points are written.
  void GetInflectionPoints(double *inflectionPoints);

  // Description:
  // Get a list of inflection points. These are double values 0 < r <= 1.0
  // corresponding to reduction level, and there are a total of
  // NumberOfInflectionPoints() values. You must provide an array (of
  // the correct size) into which the inflection points are written.
  // This method returns a pointer to a list of inflection points.
  double *GetInflectionPoints();

  // Description:
  // Set/get the desired precision for the output types. See the documentation
  // for the vtkAlgorithm::DesiredOutputPrecision enum for an explanation of
  // the available precision settings.
  vtkSetMacro(OutputPointsPrecision,int);
  vtkGetMacro(OutputPointsPrecision,int);

protected:
  vtkDecimatePro();
  ~vtkDecimatePro();

  int RequestData(vtkInformation *, vtkInformationVector **, vtkInformationVector *);

  double TargetReduction;
  double FeatureAngle;
  double MaximumError;
  double AbsoluteError;
  int ErrorIsAbsolute;
  int AccumulateError;
  double SplitAngle;
  int Splitting;
  int PreSplitMesh;
  int BoundaryVertexDeletion;
  int PreserveTopology;
  int Degree;
  double InflectionPointRatio;
  vtkDoubleArray *InflectionPoints;
  int OutputPointsPrecision;

  // to replace a static object
  vtkIdList *Neighbors;
  vtkPriorityQueue *EdgeLengths;

  void SplitMesh();
  int EvaluateVertex(vtkIdType ptId, unsigned short int numTris,
                     vtkIdType *tris, vtkIdType fedges[2]);
  vtkIdType FindSplit(int type, vtkIdType fedges[2], vtkIdType& pt1,
                      vtkIdType& pt2, vtkIdList *CollapseTris);
  int IsValidSplit(int index);
  void SplitLoop(vtkIdType fedges[2], vtkIdType& n1, vtkIdType *l1,
                 vtkIdType& n2, vtkIdType *l2);
  void SplitVertex(vtkIdType ptId,int type, unsigned short int numTris,
                   vtkIdType *tris, int insert);
  int CollapseEdge(int type, vtkIdType ptId, vtkIdType collapseId,
                   vtkIdType pt1, vtkIdType pt2, vtkIdList *CollapseTris);
  void DistributeError(double error);

  //
  // Special classes for manipulating data
  //
  //BTX - begin tcl exclude
  //
  // Special structures for building loops
  class LocalVertex
  {
  public:
    vtkIdType     id;
    double   x[3];
    double   FAngle;
  };
  typedef LocalVertex *LocalVertexPtr;

  class LocalTri
  {
  public:
    vtkIdType     id;
    double   area;
    double   n[3];
    vtkIdType     verts[3];
  };
  typedef LocalTri *LocalTriPtr;

  class VertexArray;
  friend class VertexArray;
  class VertexArray { //;prevent man page generation
  public:
    VertexArray(const vtkIdType sz)
      {this->MaxId = -1; this->Array = new LocalVertex[sz];};
    ~VertexArray()
      {
        delete [] this->Array;
      };
    vtkIdType GetNumberOfVertices() {return this->MaxId + 1;};
    void InsertNextVertex(LocalVertex& v)
      {this->MaxId++; this->Array[this->MaxId] = v;};
    LocalVertex& GetVertex(vtkIdType i) {return this->Array[i];};
    void Reset() {this->MaxId = -1;};

    LocalVertex *Array; // pointer to data
    vtkIdType MaxId;             // maximum index inserted thus far
  };

  class TriArray;
  friend class TriArray;
  class TriArray { //;prevent man page generation
  public:
    TriArray(const vtkIdType sz)
      {this->MaxId = -1; this->Array = new LocalTri[sz];};
    ~TriArray()
      {
        delete [] this->Array;
      };
    vtkIdType GetNumberOfTriangles() {return this->MaxId + 1;};
    void InsertNextTriangle(LocalTri& t)
      {this->MaxId++; this->Array[this->MaxId] = t;};
    LocalTri& GetTriangle(vtkIdType i) {return this->Array[i];};
    void Reset() {this->MaxId = -1;};

    LocalTri *Array;  // pointer to data
    vtkIdType MaxId;           // maximum index inserted thus far
  };
  //ETX - end tcl exclude
  //

private:
  void InitializeQueue(vtkIdType numPts);
  void DeleteQueue();
  void Insert(vtkIdType id, double error= -1.0);
  int Pop(double &error);
  double DeleteId(vtkIdType id);
  void Reset();

  vtkPriorityQueue *Queue;
  vtkDoubleArray *VertexError;

  VertexArray *V;
  TriArray *T;

  // Use to be static variables used by object
  vtkPolyData *Mesh; //operate on this data structure
  double Pt[3];      //least squares plane point
  double Normal[3];  //least squares plane normal
  double LoopArea;   //the total area of all triangles in a loop
  double CosAngle;   //Cosine of dihedral angle
  double Tolerance;  //Intersection tolerance
  double X[3];       //coordinates of current point
  int NumCollapses; //Number of times edge collapses occur
  int NumMerges;    //Number of times vertex merges occur
  int Split;        //Controls whether and when vertex splitting occurs
  int VertexDegree; //Maximum number of triangles that can use a vertex
  vtkIdType NumberOfRemainingTris; //Number of triangles left in the mesh
  double TheSplitAngle; //Split angle
  int SplitState;   //State of the splitting process
  double Error;      //Maximum allowable surface error

private:
  vtkDecimatePro(const vtkDecimatePro&);  // Not implemented.
  void operator=(const vtkDecimatePro&);  // Not implemented.
};

#endif