kannel-dev 1.4.4-5 / usr / include / kannel / gwlib / octstr.h

/* ==================================================================== 
 * The Kannel Software License, Version 1.0 
 * 
 * Copyright (c) 2001-2014 Kannel Group  
 * Copyright (c) 1998-2001 WapIT Ltd.   
 * All rights reserved. 
 * 
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met: 
 * 
 * 1. Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer. 
 * 
 * 2. Redistributions in binary form must reproduce the above copyright 
 *    notice, this list of conditions and the following disclaimer in 
 *    the documentation and/or other materials provided with the 
 *    distribution. 
 * 
 * 3. The end-user documentation included with the redistribution, 
 *    if any, must include the following acknowledgment: 
 *       "This product includes software developed by the 
 *        Kannel Group (http://www.kannel.org/)." 
 *    Alternately, this acknowledgment may appear in the software itself, 
 *    if and wherever such third-party acknowledgments normally appear. 
 * 
 * 4. The names "Kannel" and "Kannel Group" must not be used to 
 *    endorse or promote products derived from this software without 
 *    prior written permission. For written permission, please  
 *    contact org@kannel.org. 
 * 
 * 5. Products derived from this software may not be called "Kannel", 
 *    nor may "Kannel" appear in their name, without prior written 
 *    permission of the Kannel Group. 
 * 
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED 
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
 * DISCLAIMED.  IN NO EVENT SHALL THE KANNEL GROUP OR ITS CONTRIBUTORS 
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,  
 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR  
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,  
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,  
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
 * ==================================================================== 
 * 
 * This software consists of voluntary contributions made by many 
 * individuals on behalf of the Kannel Group.  For more information on  
 * the Kannel Group, please see <http://www.kannel.org/>. 
 * 
 * Portions of this software are based upon software originally written at  
 * WapIT Ltd., Helsinki, Finland for the Kannel project.  
 */ 

/*
 * octstr.h - Octet strings
 *
 * This header file declares an abstract data type, Octstr, for storing
 * and manipulating octet strings: strings of arbitrary binary data in
 * 8-bit bytes. Unlike C strings, they can contain the NUL byte ('\0').
 * Conceptually, they consist of a sequence of octets (bytes) and the
 * length of the sequence. There are various basic operations on octet
 * strings: concatenating, comparing, printing, etc.
 *
 * Octet strings come in two flavors: mutable and immutable. Mutable
 * octet strings are the normal kind and they can be modified and
 * otherwise manipulated at will. Immutable octet strings are meant to
 * be wrappers around a C string literal. They may not be modified, though
 * they may be destroyed.
 *
 * Immutable octet strings are meant to simplify usage of octet strings
 * together with C strings by reducing the number of octstr_* functions.
 * For example, we need a function for searching one string within another.
 * There needs to be different flavors of this: exact search, case-insensitive
 * search, and a search limited to the first N octets of the strings.
 * If in each of these one of the arguments may be either an octet string
 * or a C string, the number of functions doubles. Thus, we use immutable
 * strings instead:
 *
 *	octstr_search(os, octstr_imm("foo"), 0)
 *
 * The above looks like a memory leak, but it is not. Each immutable
 * octet string (i.e., with the same C string literal pointer) is really 
 * created only the first time, and octstr_destroy won't destroy it,
 * either. The immutable octet strings are destroyed automatically when
 * the process ends.
 *
 * See comments below for explanations on individual functions. Note that
 * all functions use gw_malloc and friends, so they won't return if the
 * memory allocations fail. Octet string functions are thread safe, as
 * long as they only one thread at a time operates on each octet string.
 */

#ifndef OCTSTR_H
#define OCTSTR_H

#include <stdio.h>
#include <stdarg.h>

#include "list.h"

typedef struct Octstr Octstr;


/*
 * Initialize the Octstr subsystem.
 */
void octstr_init(void);


/*
 * Shut down the Octstr subsystem.
 */
void octstr_shutdown(void);


/*
 * Create an octet string from a NUL-terminated C string. Return pointer to
 * the new object.
 */
Octstr *octstr_create_real(const char *cstr, const char *file, long line,
                           const char *func);
#define octstr_create(cstr) \
    (Octstr*)gw_claim_area(octstr_create_real((cstr), __FILE__, __LINE__, __func__))

/*
 * Create an octet string from arbitrary binary data. The length of the
 * data is given, so it can contain NUL characters.
 */
Octstr *octstr_create_from_data_real(const char *data, long len, const char *file,
                                     long line, const char *func);
#define octstr_create_from_data(data, len) \
    (Octstr*)gw_claim_area(octstr_create_from_data_real((data), (len), __FILE__, __LINE__, __func__))
#define octstr_create_from_data_trace(data, len, file, line, func) \
    (Octstr*)gw_claim_area(octstr_create_from_data_real(data, len, file, line, func))


/*
 * Create an immutable octet string from a C string literal. The
 * C string literal MUST NOT be modified and it MUST exist until the
 * octet string is destroyed. The immutable octet string need not be
 * destroyed - it is destroyed automatically when octstr_shutdown is
 * called. In fact, octstr_destroy is a no-op for immutables.
 */
Octstr *octstr_imm(const char *cstr);


/*
 * Destroy an octet string, freeing all memory it uses. A NULL argument
 * is ignored.
 */
void octstr_destroy(Octstr *ostr);


/*
 * Destroy an octet string. Wrapper around octstr_destroy that is callable
 * via gwlist_destroy.
 */
void octstr_destroy_item(void *os);


/*
 * Return the length of (number of octets in) an object string.
 */
long octstr_len(const Octstr *ostr);


/*
 * Create a new octet string by copying part of an existing one. Return 
 * pointer to the new object. If `from' is after end of `ostr', an empty
 * octet string is created. If `from+len' is after the end of `ostr', 
 * `len' is reduced appropriately.
 */
Octstr *octstr_copy_real(const Octstr *ostr, long from, long len, const char *file,
                         long line, const char *func);
#define octstr_copy(ostr, from, len) \
    gw_claim_area(octstr_copy_real((ostr), (from), (len), __FILE__, __LINE__, __func__))


/*
 * Copy all of an octet string.
 */
Octstr *octstr_duplicate_real(const Octstr *ostr, const char *file, long line,
                              const char *func);
#define octstr_duplicate(ostr) \
    gw_claim_area(octstr_duplicate_real((ostr), __FILE__, __LINE__, __func__))


/*
 * Create a new octet string by catenating two existing ones. Return 
 * pointer to the new object.
 */
Octstr *octstr_cat(Octstr *ostr1, Octstr *ostr2);


/*
 * Return value of octet at a given position in an octet string. The returned
 * value has a range of 0..255 for valid positions, and -1 if `pos' is
 * after the end of the octet string.
 */
int octstr_get_char(const Octstr *ostr, long pos);


/*
 * Replace a single, existing character in an octet string. Operation cannot
 * fail: if pos is not inside the string, the operation will silently be
 * ignored.
 */
void octstr_set_char(Octstr *ostr, long pos, int ch);


/*
 * Copy bytes from octet string into array.
 */
void octstr_get_many_chars(char *buf, Octstr *ostr, long pos, long len);


/*
 * Return pointer to contents of octet string as a NUL-terminated C string.
 * This is guaranteed to have a NUL character at the end, but it is not
 * guaranteed (how could it?) to not contain NUL characters elsewhere.
 * The pointer points directly into the internal buffer of the octet
 * string, and must not be modified, and must not be used after any
 * octstr_* function that modifies the octet string is called after this
 * one. It is meant for printing debug messages easily.
 *
 * If the octet string is empty, an empty C string is returned, not NULL.
 */
char *octstr_get_cstr_real(const Octstr *ostr, const char *file, long line,
    	    	    	   const char *func);
#define octstr_get_cstr(ostr) \
    (octstr_get_cstr_real(ostr, __FILE__, __LINE__, __func__))


/*
 * Append characters from printable hexadecimal format at the tail of 
 * an octet string. "78797a" or "78797A" would be converted to "xyz"
 * and then appended.
 */
void octstr_append_from_hex(Octstr *ostr, char *hex);


/* Convert the octet string in-place to printable hexadecimal format.
 * "xyz" would be converted to "78797a".  If the uppercase
 * flag is set, 'A' through 'F' are used instead of 'a' through 'f'.
 */
void octstr_binary_to_hex(Octstr *ostr, int uppercase);


/* Convert the octet string in-place from printable hexadecimal
 * format to binary.  "78797a" or "78797A" would be converted to "xyz".
 * If the string is not in the expected format, return -1 and leave
 * the string unchanged.  If all was fine, return 0. */
int octstr_hex_to_binary(Octstr *ostr);


/* Base64-encode the octet string in-place, using the MIME base64
 * encoding defined in RFC 2045.  Note that the result may be
 * multi-line and is always terminated with a CR LF sequence.  */
void octstr_binary_to_base64(Octstr *ostr);


/* Base64-decode the octet string in-place, using the MIME base64
 * encoding defined in RFC 2045. */
void octstr_base64_to_binary(Octstr *ostr);


/* Parse a number at position 'pos' in 'ostr', using the same rules as
 * strtol uses regarding 'base'.  Skip leading whitespace.
 * 
 * Return the position of the first character after the number,
 * or -1 if there was an error.  Return the length of the octet string
 * if the number ran to the end of the string.
 * 
 * Assign the number itself to the location pointed to by 'number', if
 * there was no error.
 * 
 * Possible errno values in case of an error:
 *    ERANGE    The number did not fit in a long.
 *    EINVAL    No digits of the appropriate base were found.
 */
long octstr_parse_long(long *number, Octstr *ostr, long pos, int base);

/* As above but parses and assigns double number. */
long octstr_parse_double(double *number, Octstr *ostr, long pos);


/* Run the 'filter' function over each character in the specified range.
 * Return 1 if the filter returned true for all characters, otherwise 0.
 * The octet string is not changed.
 * For example: ok = octstr_check_range(o, 1, 10, gw_isdigit);
 */
typedef int (*octstr_func_t)(int);
int octstr_check_range(Octstr *ostr, long pos, long len, 
    	    	       octstr_func_t filter);


/* Run the 'map' function over each character in the specified range,
 * replacing each character with the return value of that function.
 * For example: octstr_convert_range(o, 1, 10, tolower);
 */
void octstr_convert_range(Octstr *ostr, long pos, long len, 
    	    	    	  octstr_func_t map);

/*
 * Use the octstr_convert_range() with make_printable() to ensure
 * every char in the octstr can be printed in the current locale. Each
 * character that is NOT printable is converted to a '.' (dot).
 */
void octstr_convert_printable(Octstr *ostr);


/*
 * Compare two octet strings, returning 0 if they are equal, negative if
 * `ostr1' is less than `ostr2' (when compared octet-value by octet-value),
 * and positive if greater.
 */
int octstr_compare(const Octstr *ostr1, const Octstr *ostr2);


/*
 * Like octstr_compare, except compares bytes without case sensitivity.
 * Note that this probably doesn't work for Unicode, but should work
 * for such 8-bit character sets as are supported by libc.
 */
int octstr_case_compare(const Octstr *ostr1, const Octstr *ostr2);


/*
 * as above, but comparing is done only up to n bytes
 */
int octstr_ncompare(const Octstr *ostr1, const Octstr *ostr2, long n);


/*
 * Same as octstr_compare, but compares the content of the octet string to 
 * a C string.
 */
int octstr_str_compare(const Octstr *ostr1, const char *str);


/*
 * Like octstr_str_compare, except compares bytes without case sensitifity.
 */
int octstr_str_case_compare(const Octstr *ostr1, const char *str);
 

/*
 * Same as octstr_str_compare, but comparing is done only up to n bytes.
 */
int octstr_str_ncompare(const Octstr *ostr, const char *str, long n);


/*
 * Write contents of octet string to a file. Return -1 for error, 0 for OK.
 */
int octstr_print(FILE *f, Octstr *ostr);


/*
 * Search the character from octet string starting from position pos. Returns 
 * the position (index) of the char in string, -1 if not found.
 */
long octstr_search_char(const Octstr *ostr, int ch, long pos);


/*
 * Search the character backwards from octet string starting from position pos. Returns
 * the position (index) of the char in string, -1 if not found.
 */
long octstr_rsearch_char(const Octstr *ostr, int ch, long pos);


/*
 * Search several character from octet string starting from position pos. Returns 
 * the position (index) of the first char found in string, -1 if none was found.
 */
long octstr_search_chars(const Octstr *ostr, const Octstr *chars, long pos);


/*
 * Search for the octet string 'needle' in the octet string 'haystack'.
 * Return the start position (index) of 'needle' in 'haystack'.
 * Return -1 if not found.
 */
long octstr_search(const Octstr *haystack, const Octstr *needle, long pos);


/*
 * Like octstr_search, but ignores 8-bit byte case.
 */
long octstr_case_search(const Octstr *haystack, const Octstr *needle, long pos);

/*
 * Like octstr_case_search, but searchs only first n octets.
 */
long octstr_case_nsearch(const Octstr *haystack, const Octstr *needle, long pos, long n);

/*
 * Like octstr_search, but with needle as C-String.
 */
long octstr_str_search(const Octstr *haystack, const char *needle, long pos);

/*
 * Write contents of octet string to a file, in human readable form. 
 * Return -1 for error, 0 for OK. Octets that are not printable characters
 * are printed using C-style escape notation.
 */
int octstr_pretty_print(FILE *f, Octstr *ostr);


/*
 * Write contents of octet string to a socket. Return -1 for error, 0 for OK.
 */
int octstr_write_to_socket(int socket, Octstr *ostr);

/*
 * Write contents of octet string starting at 'from' to a
 * non-blocking file descriptor.
 * Return the number of octets written.  Return -1 for error.
 * It is possible for this function to write only part of the octstr.
 */
long octstr_write_data(Octstr *ostr, int fd, long from);

/*
 * Read available data from socket and return it as an octstr.
 * Block if no data is available.  If a lot of data is available,
 * read only up to an internal limit.
 * Return -1 for error.
 */
int octstr_append_from_socket(Octstr *ostr, int socket);

/*
 * Insert one octet string into another. `pos' gives the position
 * in `ostr1' where `ostr2' should be inserted.
 */
void octstr_insert(Octstr *ostr1, const Octstr *ostr2, long pos);


/*
 * Insert characters from C array into an octet string. `pos' 
 * gives the position in `ostr' where `data' should be inserted. `len'
 * gives the number of characters in `data'.
 * If the given `pos' is greater than the length of the input octet string,
 * it is set to that length, resulting in an append.
 */
void octstr_insert_data(Octstr *ostr, long pos, const char *data, long len);

/*
 * Similar as previous, expect that now a single character is inserted.
 */
void octstr_insert_char(Octstr *ostr, long pos, const char c);


/*
 * Append characters from C array at the tail of an octet string.
 */
void octstr_append_data(Octstr *ostr, const char *data, long len);


/*
 * Append a second octstr to the first.
 */
void octstr_append(Octstr *ostr1, const Octstr *ostr2);


/*
 * Append a normal C string at the tail of an octet string.
 */
void octstr_append_cstr(Octstr *ostr, const char *cstr);


/*
 * Append a single character at the tail of an octet string.
 */
void octstr_append_char(Octstr *ostr, int ch);


/*
 * Truncate octet string at `new_len'. If new_len is same or more
 * than current, do nothing.
 */
void octstr_truncate(Octstr *ostr, int new_len);


/*
 * Strip white space from start and end of a octet string.
 */
void octstr_strip_blanks(Octstr *ostr);

/*
 * Strip CR and LF from start and end of a octet string.
 */
void octstr_strip_crlfs(Octstr *ostr);

/*
 * Strip non-alphanums from start and end of a octet string.
 */
void octstr_strip_nonalphanums(Octstr *ostr);


/*
 * Shrink consecutive white space characters into one space.
 */
void octstr_shrink_blanks(Octstr *ostr);


/*
 * Delete part of an octet string.
 */
void octstr_delete(Octstr *ostr1, long pos, long len);


/*
 * Read the contents of a named file to an octet string. Return pointer to
 * octet string.
 */
Octstr *octstr_read_file(const char *filename);


/*
 * Read the contents of a file descriptor pipe to an octet string. 
 * Return pointer to octet string.
 */
Octstr *octstr_read_pipe(FILE *f);


/*
 * Split an octet string into words at whitespace, and return a list
 * containing the new octet strings.
 */
List *octstr_split_words(const Octstr *ostr);


/*
 * Split an octet string into substrings at every occurence of `sep'.
 * Return List with the substrings.
 */
List *octstr_split(const Octstr *os, const Octstr *sep);


/*
 * Compare two octet strings in a manner suitable for gwlist_search.
 */
int octstr_item_match(void *item, void *pattern);


/*
 * Same as above, except compares bytes without case sensitivity
 */
int octstr_item_case_match(void *item, void *pattern);


/*
 * Print debugging information about octet string. This is abstracted to the
 * various log levels we have: GW_DEBUG, GW_INFO, GW_WARNING, GW_ERROR
 * 
 * If a third parameter in the argument list is given, we will dump the
 * octstr in that log level instead of the default GW_DEBUG level.
 */
void octstr_dump_real(const Octstr *ostr, int level, ...);
#define octstr_dump(ostr, level, ...) \
    octstr_dump_real(ostr, level, GW_DEBUG, ##__VA_ARGS__)


/*
 * Write the contents of an octet string to the debug log.
 * Keep it on one line if the octet string is short and printable,
 * otherwise use a hex dump.
 */
void octstr_dump_short(Octstr *ostr, int level, const char *name);


/*
 * decode url-encoded octstr in-place.
 * Return 0 if all went fine, or -1 if there was some garbage
 */
int octstr_url_decode(Octstr *ostr);


/*
 * URL encode the argument string in place.
 */
void octstr_url_encode(Octstr *ostr);


/*
 * Treat the octstr as an unsigned array of bits, most significant bit
 * first, and return the indicated bit range as an integer.  numbits
 * must not be larger than 32.  Bits beyond the end of the string will
 * be read as 0.
 */
long octstr_get_bits(Octstr *ostr, long bitpos, int numbits);


/*
 * Treat the octstr as an unsigned array of bits, most significant bit
 * first, and set the indicated bit range to the given value.  numbits
 * must not be larger than 32.  The value must fit in that number of bits.
 * The string will be extended with 0-valued octets as necessary to hold
 * the indicated bit range.
 */
void octstr_set_bits(Octstr *ostr, long bitpos, int numbits, 
    	    	     unsigned long value);


/* 
 * Encode value in WSP's uintvar format, and append it to the octstr
 */
void octstr_append_uintvar(Octstr *ostr, unsigned long value);


/* 
 * Decode a value in WSP's uintvar format at position pos of the octstr,
 * and put the result in *value.  Return the position after the uintvar.
 * Return -1 if there is not a valid uintvar at pos.
 */
long octstr_extract_uintvar(Octstr *ostr, unsigned long *value, long pos);


/*
 * Append the decimal representation of the given value to ostr 
 */
void octstr_append_decimal(Octstr *ostr, long value);


/*
 * Create a new octet string based on a printf-like (but not identical)
 * format string, and a list of other arguments. The format string is
 * a C string for convenience, but this may change later.
 *
 * The syntax for the format string is as follows:
 *
 *	% [-] [0] [width] [. prec] [type] conversion
 *
 * where [] denotes optional parts and the various parts have the
 * following meanings:
 *
 *	-	add padding to the right, instead of the left of the field
 *
 *	0	pad with zeroes, not spaces
 *
 *	width	minimum output width; non-negative integer or '*', indicating
 *		that the next argument is an int and gives the width
 *
 *	.	a dot to indicate that precision follows
 *
 *	prec	precision: maximum length of strings, maximum number of
 *		decimals for floating point numbers; non-negative integer
 *		or '*' indicating that the next argument is an int and
 *		gives the precision
 *
 *	type	type of integer argument: either h (for short int) or 
 *		l (for long int); may only be used with conversion 'd'
 *
 *	conversion
 *		how the field is to be converted, also implicitly defines
 *		the type of the next argument; one of
 *
 *			d	int (unless type says otherwise)
 *				output as a decimal integer
 *
 *			e, f, g	double
 *				output in various formats of floating
 *				point, see printf(3) for details
 *
 *			s	char *
 *				output as character string
 *
 *			S	Octstr *
 *				output as character string, except '\0'
 *				inside the string is included in the
 *				output
 *
 *			E	Octstr *
 *				output as character string, except that
 *				contents are URL-encoded when need to. Note
 *				that trunctae is done afterwards and can
 *				cut escape '%EE' in half
 *
 *			H	Octstr *
 *				output as character string, except that
 *				contents are HEX-encoded in uppercase
 */
Octstr *octstr_format(const char *fmt, ...);

/*
 * Like octstr_format, but takes the argument list as a va_list.
 */
Octstr *octstr_format_valist_real(const char *fmt, va_list args);
#define octstr_format_valist(fmt, args) gw_claim_area(octstr_format_valist_real(fmt, args))

/*
 * Like octstr_format, but appends output to an existing octet
 * string, instead of creating a new one.
 */
void octstr_format_append(Octstr *os, const char *fmt, ...);


/*
 * Compute a hash key value for an octet string by adding all the 
 * octets together.
 */
unsigned long octstr_hash_key(Octstr *ostr);

/*
 * return an Octstr encoded in charset named tocode created from the data
 * in the Octstr orig that is encoded in the charset fromcode.
 */
int octstr_recode(Octstr *tocode, Octstr *fromcode, Octstr *orig);

/*
 * Strip all occurence of char ch from start of Octstr
 */
void octstr_strip_char(Octstr *text, char ch);

/*
 * Check if ostr is numeric
 */
int octstr_isnum(Octstr *ostr1);

/*
 * Replace all occurences of needle with repl within haystack
 */
void octstr_replace(Octstr *haystack, Octstr *needle, Octstr *repl);

/*
 * Replace first occurence of needle with repl within haystack
 */
void octstr_replace_first(Octstr *haystack, Octstr *needle, Octstr *repl);

/*
 * Symbolize hex string '78797a' becomes '%78%79%7a'
 */
int octstr_symbolize(Octstr *ostr);

/*
 * Remove all occurrences of 'needle' within 'haystack'.
 */
void octstr_delete_matching(Octstr *haystack, Octstr *needle);

/*
 * Return 1, if octstr 'os' contains only hex chars, 0 otherwise.
 */
int octstr_is_all_hex(Octstr *os);                                                    
                                                    
/*
 * make data HTML safe by converting appropriate characters to HTML entities.
 * conversion is done in place
 */
void octstr_convert_to_html_entities(Octstr* input);

/*
 * convert HTML safe data back to binary data by replacing HTML entities with their
 * respective character values.
 * conversion is done in place
 */
void octstr_convert_from_html_entities(Octstr* input);

#endif