/var/spool/hylafax/config/umc92144 is in hylafax-server 3:6.0.6-8.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 | # umc92144.config
# Steffan Klipsch 03 Oct 98
#
# This file will enable the faxaddmodem script to automatically detect
# UMC modems with BIOS versions as used in the Creatix 14400 modems SG144U,
# SG144Ui, Phonemaster 144VF and Phonemaster 144VFi.
#
# Credits go to Sascha Ottolski how posted a working snippet in Mar 98.
#
# Instructions : install as file $SPOOL/config/umc92144
#
# Configuration for modems based on UMC 92114 DATA/FAX/VOICE CHIP SET
# tested on CREATIX Phonemaster 144 VFi
# with BIOS CIS CCUSBIXX V1.10 10/10/95/VERSION 1.10 01-05-01-01)
# users of BIOS VERSION 1.00 00-04-00-00 should consider a BIOS update
# (search on http://www.creatix.com)
#
# CONFIG: CLASS2: *CCUSBIXX*-*
# BEGIN-SERVER
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use this to setup defaults
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: rtscts
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemSetupAACmd: AT+FAA=1
ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
ModemDialCmd: ATDT%s # T for tone dialing
ModemNoFlowCmd: AT&K
ModemHardFlowCmd: AT&K3
ModemSoftFlowCmd: AT&K4
ModemAnswerFaxBeginCmd: "<19200>" # fax mode works better with 19200 baud
ModemWaitForConnect: yes
ModemRecvFillOrder: MSB2LSB
Class2RecvDataTrigger: "\022"
|