/var/spool/hylafax/config/lucent-mt-20 is in hylafax-server 3:6.0.6-8.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 | # $Id$
#
# prototype config file for MultiTech MT5634ZBA-V.92-NAM
#
#
# CONFIG: CLASS2.0:"Multi-Tech Systems"-"MT5634ZBA"-*
# CONFIG: CLASS2.0:"Multi-Tech Systems"-"MT5634ZPX"-*
# CONFIG: CLASS2.0:*-"ISI5634PCI"-*
# CONFIG: CLASS2.0:*-"MT5634SMI-V92"-*
#
# BEGIN-SERVER
# END-SERVER
#
ModemType: Class2.0
ModemRate: 19200
ModemNoFlowCmd: AT&K0
ModemSoftFlowCmd: AT&K4
ModemHardFlowCmd: AT&K3
Class2APCmd: AT+FAP=1,1,1
Class2BUGCmd: AT+FBU=0 # early firmware is buggy
Class2SendRTC: yes
Class2UseHex: yes
# Some firmwares do not report copy quality correction, although it
# is present and cannot be disabled. Thus modem-based CQ must be used.
Class2CQQueryCmd: "!(00-02),(00-02)"
Class2CQCmd: AT+FCQ=1,0
# versions that respond to AT+FFC=? with non-zero data support RTFCC
# Class2RTFCC: yes
# Some firmware revisions (i.e. 1.25 in ZBAs) report MMR support but
# corrupt the data. Enabling the following lines should work around this.
# Compare this against the modem's AT+FCC=? response.
# Class2DCCQueryCmd: "!(00-01),(00-05),(00-02),(00-02),(00-01),(00-01),(00),(00-07)"
# ModemAnswerCmd: AT+FCC=,,,,1,,,,0;A
# ModemDialCmd: AT+FCC=,,,,1,,,,0;DT%s
# If your modem supports ECM you may want to do something like this
# Class2Cmd: AT+FCLASS=2.0;+FRY=4
# If your line supports Caller-ID, you may want to uncomment this...
# ModemResetCmds: AT+VCID=1
# CallIDPattern: "NMBR="
# CallIDPattern: "NAME="
# Or with the MT5634ZBA-DID you'll probably need something like...
# ModemReadyCmds: AT*DS1*DD0*DF1*DN4 # enable DTMF-DID, wink-start, 4 digits
# CallIDPattern: "DTMF" # format of AT*DF1
# CallIDAnswerLength: 4 # four DTMF-DID digits then ATA
|