/etc/eggrc is in gcpegg 5.1-14.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 | # Configuration file for egg collection software
# This specifies the egg configuration information, the contact
# information for its basket(s), and initial data acquisition parameters.
# Each line consists of a case-sensitive keyword and a series of
# options. Defined keywords are:
#
# EGG <name> <id> <ip addr> <primbasket> <conntype> <connival> <url>
#
# The primary basket <primbasket> is the name of the basket (defined
# below) that should be contacted retrieve data from this Egg.
# The connection type <conntype> is "PERM" (permanent) or "DND"
# (dial-and-drop). So far the code does not support the DND option.
# The connection interval <connival> determines the time (in minutes)
# between transmission attempts. If specified, and not equal to
# ".", <url> gives a URL (for example http://www.somesite.net/page.html)
# which will be linked to the egg <name> in status reports. Note that
# this specification has meaning only in the .basketrc file. For
# compatibility, it is permitted in an .eggrc file, but is ignored.
#
# BASKET <name> <ip addr>
#
# This entry tells us about the existence of a set of baskets. The
# basket named as primary is the one which will be contacted
# initially.
#
# PROTOCOL <samprec> <secrec> <recpkt> <trialsz>
#
# Specify the default data collection protocol. The arguments are
# <samprec> samples per record (1-10, though this should always be 5-10),
# <secrec> seconds per records (1-3000),
# <recpkt> records per packet (1-60), and
# <trialsz> bits per sample (32-255).
#
# REG <type> <port> <baud>
#
# Specify hardware device. Supported types include "PEAR" only at
# this time. Port is serial port number (e.g. 1 for /dev/ttyS1);
# <baud> is baud rate.
#
# NETUP <script> <args> ...
# NETDOWN <script> <args> ...
#
# Provide script files to be run to bring up and tear down the network
# connection on demand. These will only be used if connection type is
# DND.
#EGG halley 1 10.0.0.111 halley PERM 1
#BASKET halley 10.0.0.111
#EGG halley 1 10.0.0.111 mercury DND 3
#BASKET mercury 10.0.0.125
#EGG noosphere 28 128.112.35.133 noosphere PERM 1
#BASKET noosphere 128.112.35.133
# diesse -> diesse
#EGG diesse 37 193.8.230.134 diesse PERM 1
#BASKET diesse 193.8.230.134
# noosphere -> diesse
#EGG noosphere 28 128.112.35.133 diesse PERM 1
#BASKET diesse 193.8.230.134
# throop -> diesse
#EGG throop 1003 193.8.230.132 diesse PERM 1 http://www.fourmilab.ch/
#BASKET diesse 193.8.230.134
# jura -> jura
#EGG jura 1004 193.8.230.130 jura PERM 1 http://www.fourmilab.ch/
#BASKET jura 193.8.230.130
# diesse -> noosphere
#EGG diesse.fourmilab.ch 37 193.8.230.134 noosphere PERM 1
#BASKET noosphere 128.112.35.133
#EGG diesse 37 193.8.230.134 jura PERM 1
#BASKET jura 193.8.230.130
#BASKET tonga 209.157.90.137
#BASKET tonga1 209.157.90.138
#PROTOCOL 10 10 6 200
#REG PEAR 2 9600
#REG PSEUDO 1 9600
#REG ORION 1 9600
#NETUP pppscript up
#NETDOWN pppscript down
egg.host.name ID# IP_address noosphere PERM 1
BASKET noosphere 128.112.35.133
PROTOCOL 10 10 30 200
REG ORION 0 9600
#REG PEAR 0 9600
|