/usr/share/doc/dibbler-client/examples/client.conf is in dibbler-client 1.0.1-1build1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 | #
# Example client configuration file: default
#
# Uncomment following line to use Link-layer DUID instead of default Link-layer+time
#duid-type duid-ll
# Uncomment following line to make dibbler very aggressive about getting requested
# options.
#insist-mode
# Uncomment following line to make dibbler accept downed/not associated interfaces
inactive-mode
# Uncomment following line to skip confirm sending (after crash or power outage)
skip-confirm
log-mode short
# 7 = omit debug messages
log-level 7
# Uncomment this line to run script every time response is received
# script "/var/lib/dibbler/client-notify.sh"
# Dibbler 1.0.0RC1 and earlier added obtained addresses with /64 prefix. This
# violated spec (RFC3315), but was very useful as hosts in the network can
# exchange data immediately, without extra wait for receiving corresponding RA.
# See discussion here: https://klub.com.pl/bugzilla3/show_bug.cgi?id=222
# To restore previous behavior, uncomment this line:
# strict-rfc-no-routing 0
# Dibbler can detect interfaces and ask for address on every suitable interface.
# If that is what you require, just don't mention any interfaces
# On the other hand, you may want to specify interfaces to be configured
# explicitely
iface "eth0" {
# Request a regular (non-temporary) address
ia
# Request temporary address
# ta
# Request prefix delegation
# pd
option dns-server
option domain
#option ntp-server
#option time-zone
#option sip-server
#option sip-domain
#option nis-server
#option nis-domain
#option nis+-server
#option nis+-domain
#option vendor-spec
#option aftr
}
|