/usr/share/perl5/IO/Compress/Bzip2.pm is in libio-compress-perl 2.074-1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 | package IO::Compress::Bzip2 ;
use strict ;
use warnings;
use bytes;
require Exporter ;
use IO::Compress::Base 2.074 ;
use IO::Compress::Base::Common 2.074 qw();
use IO::Compress::Adapter::Bzip2 2.074 ;
our ($VERSION, @ISA, @EXPORT_OK, %EXPORT_TAGS, $Bzip2Error);
$VERSION = '2.074';
$Bzip2Error = '';
@ISA = qw(IO::Compress::Base Exporter);
@EXPORT_OK = qw( $Bzip2Error bzip2 ) ;
%EXPORT_TAGS = %IO::Compress::Base::EXPORT_TAGS ;
push @{ $EXPORT_TAGS{all} }, @EXPORT_OK ;
Exporter::export_ok_tags('all');
sub new
{
my $class = shift ;
my $obj = IO::Compress::Base::Common::createSelfTiedObject($class, \$Bzip2Error);
return $obj->_create(undef, @_);
}
sub bzip2
{
my $obj = IO::Compress::Base::Common::createSelfTiedObject(undef, \$Bzip2Error);
$obj->_def(@_);
}
sub mkHeader
{
my $self = shift ;
return '';
}
sub getExtraParams
{
my $self = shift ;
use IO::Compress::Base::Common 2.074 qw(:Parse);
return (
'blocksize100k' => [IO::Compress::Base::Common::Parse_unsigned, 1],
'workfactor' => [IO::Compress::Base::Common::Parse_unsigned, 0],
'verbosity' => [IO::Compress::Base::Common::Parse_boolean, 0],
);
}
sub ckParams
{
my $self = shift ;
my $got = shift;
# check that BlockSize100K is a number between 1 & 9
if ($got->parsed('blocksize100k')) {
my $value = $got->getValue('blocksize100k');
return $self->saveErrorString(undef, "Parameter 'BlockSize100K' not between 1 and 9, got $value")
unless defined $value && $value >= 1 && $value <= 9;
}
# check that WorkFactor between 0 & 250
if ($got->parsed('workfactor')) {
my $value = $got->getValue('workfactor');
return $self->saveErrorString(undef, "Parameter 'WorkFactor' not between 0 and 250, got $value")
unless $value >= 0 && $value <= 250;
}
return 1 ;
}
sub mkComp
{
my $self = shift ;
my $got = shift ;
my $BlockSize100K = $got->getValue('blocksize100k');
my $WorkFactor = $got->getValue('workfactor');
my $Verbosity = $got->getValue('verbosity');
my ($obj, $errstr, $errno) = IO::Compress::Adapter::Bzip2::mkCompObject(
$BlockSize100K, $WorkFactor,
$Verbosity);
return $self->saveErrorString(undef, $errstr, $errno)
if ! defined $obj;
return $obj;
}
sub mkTrailer
{
my $self = shift ;
return '';
}
sub mkFinalTrailer
{
return '';
}
#sub newHeader
#{
# my $self = shift ;
# return '';
#}
sub getInverseClass
{
return ('IO::Uncompress::Bunzip2');
}
sub getFileInfo
{
my $self = shift ;
my $params = shift;
my $file = shift ;
}
1;
__END__
=head1 NAME
IO::Compress::Bzip2 - Write bzip2 files/buffers
=head1 SYNOPSIS
use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
my $status = bzip2 $input => $output [,OPTS]
or die "bzip2 failed: $Bzip2Error\n";
my $z = new IO::Compress::Bzip2 $output [,OPTS]
or die "bzip2 failed: $Bzip2Error\n";
$z->print($string);
$z->printf($format, $string);
$z->write($string);
$z->syswrite($string [, $length, $offset]);
$z->flush();
$z->tell();
$z->eof();
$z->seek($position, $whence);
$z->binmode();
$z->fileno();
$z->opened();
$z->autoflush();
$z->input_line_number();
$z->newStream( [OPTS] );
$z->close() ;
$Bzip2Error ;
# IO::File mode
print $z $string;
printf $z $format, $string;
tell $z
eof $z
seek $z, $position, $whence
binmode $z
fileno $z
close $z ;
=head1 DESCRIPTION
This module provides a Perl interface that allows writing bzip2
compressed data to files or buffer.
For reading bzip2 files/buffers, see the companion module
L<IO::Uncompress::Bunzip2|IO::Uncompress::Bunzip2>.
=head1 Functional Interface
A top-level function, C<bzip2>, is provided to carry out
"one-shot" compression between buffers and/or files. For finer
control over the compression process, see the L</"OO Interface">
section.
use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
bzip2 $input_filename_or_reference => $output_filename_or_reference [,OPTS]
or die "bzip2 failed: $Bzip2Error\n";
The functional interface needs Perl5.005 or better.
=head2 bzip2 $input_filename_or_reference => $output_filename_or_reference [, OPTS]
C<bzip2> expects at least two parameters,
C<$input_filename_or_reference> and C<$output_filename_or_reference>.
=head3 The C<$input_filename_or_reference> parameter
The parameter, C<$input_filename_or_reference>, is used to define the
source of the uncompressed data.
It can take one of the following forms:
=over 5
=item A filename
If the <$input_filename_or_reference> parameter is a simple scalar, it is
assumed to be a filename. This file will be opened for reading and the
input data will be read from it.
=item A filehandle
If the C<$input_filename_or_reference> parameter is a filehandle, the input
data will be read from it. The string '-' can be used as an alias for
standard input.
=item A scalar reference
If C<$input_filename_or_reference> is a scalar reference, the input data
will be read from C<$$input_filename_or_reference>.
=item An array reference
If C<$input_filename_or_reference> is an array reference, each element in
the array must be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only
contains valid filenames before any data is compressed.
=item An Input FileGlob string
If C<$input_filename_or_reference> is a string that is delimited by the
characters "<" and ">" C<bzip2> will assume that it is an
I<input fileglob string>. The input is the list of files that match the
fileglob.
See L<File::GlobMapper|File::GlobMapper> for more details.
=back
If the C<$input_filename_or_reference> parameter is any other type,
C<undef> will be returned.
=head3 The C<$output_filename_or_reference> parameter
The parameter C<$output_filename_or_reference> is used to control the
destination of the compressed data. This parameter can take one of
these forms.
=over 5
=item A filename
If the C<$output_filename_or_reference> parameter is a simple scalar, it is
assumed to be a filename. This file will be opened for writing and the
compressed data will be written to it.
=item A filehandle
If the C<$output_filename_or_reference> parameter is a filehandle, the
compressed data will be written to it. The string '-' can be used as
an alias for standard output.
=item A scalar reference
If C<$output_filename_or_reference> is a scalar reference, the
compressed data will be stored in C<$$output_filename_or_reference>.
=item An Array Reference
If C<$output_filename_or_reference> is an array reference,
the compressed data will be pushed onto the array.
=item An Output FileGlob
If C<$output_filename_or_reference> is a string that is delimited by the
characters "<" and ">" C<bzip2> will assume that it is an
I<output fileglob string>. The output is the list of files that match the
fileglob.
When C<$output_filename_or_reference> is an fileglob string,
C<$input_filename_or_reference> must also be a fileglob string. Anything
else is an error.
See L<File::GlobMapper|File::GlobMapper> for more details.
=back
If the C<$output_filename_or_reference> parameter is any other type,
C<undef> will be returned.
=head2 Notes
When C<$input_filename_or_reference> maps to multiple files/buffers and
C<$output_filename_or_reference> is a single
file/buffer the input files/buffers will be stored
in C<$output_filename_or_reference> as a concatenated series of compressed data streams.
=head2 Optional Parameters
Unless specified below, the optional parameters for C<bzip2>,
C<OPTS>, are the same as those used with the OO interface defined in the
L</"Constructor Options"> section below.
=over 5
=item C<< AutoClose => 0|1 >>
This option applies to any input or output data streams to
C<bzip2> that are filehandles.
If C<AutoClose> is specified, and the value is true, it will result in all
input and/or output filehandles being closed once C<bzip2> has
completed.
This parameter defaults to 0.
=item C<< BinModeIn => 0|1 >>
When reading from a file or filehandle, set C<binmode> before reading.
Defaults to 0.
=item C<< Append => 0|1 >>
The behaviour of this option is dependent on the type of output data
stream.
=over 5
=item * A Buffer
If C<Append> is enabled, all compressed data will be append to the end of
the output buffer. Otherwise the output buffer will be cleared before any
compressed data is written to it.
=item * A Filename
If C<Append> is enabled, the file will be opened in append mode. Otherwise
the contents of the file, if any, will be truncated before any compressed
data is written to it.
=item * A Filehandle
If C<Append> is enabled, the filehandle will be positioned to the end of
the file via a call to C<seek> before any compressed data is
written to it. Otherwise the file pointer will not be moved.
=back
When C<Append> is specified, and set to true, it will I<append> all compressed
data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
appending. If the output is a buffer, all compressed data will be
appended to the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
false, it will operate as follows.
When the output is a filename, it will truncate the contents of the file
before writing any compressed data. If the output is a filehandle
its position will not be changed. If the output is a buffer, it will be
wiped before any compressed data is output.
Defaults to 0.
=back
=head2 Examples
To read the contents of the file C<file1.txt> and write the compressed
data to the file C<file1.txt.bz2>.
use strict ;
use warnings ;
use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
my $input = "file1.txt";
bzip2 $input => "$input.bz2"
or die "bzip2 failed: $Bzip2Error\n";
To read from an existing Perl filehandle, C<$input>, and write the
compressed data to a buffer, C<$buffer>.
use strict ;
use warnings ;
use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
use IO::File ;
my $input = new IO::File "<file1.txt"
or die "Cannot open 'file1.txt': $!\n" ;
my $buffer ;
bzip2 $input => \$buffer
or die "bzip2 failed: $Bzip2Error\n";
To compress all files in the directory "/my/home" that match "*.txt"
and store the compressed data in the same directory
use strict ;
use warnings ;
use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
bzip2 '</my/home/*.txt>' => '<*.bz2>'
or die "bzip2 failed: $Bzip2Error\n";
and if you want to compress each file one at a time, this will do the trick
use strict ;
use warnings ;
use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
for my $input ( glob "/my/home/*.txt" )
{
my $output = "$input.bz2" ;
bzip2 $input => $output
or die "Error compressing '$input': $Bzip2Error\n";
}
=head1 OO Interface
=head2 Constructor
The format of the constructor for C<IO::Compress::Bzip2> is shown below
my $z = new IO::Compress::Bzip2 $output [,OPTS]
or die "IO::Compress::Bzip2 failed: $Bzip2Error\n";
It returns an C<IO::Compress::Bzip2> object on success and undef on failure.
The variable C<$Bzip2Error> will contain an error message on failure.
If you are running Perl 5.005 or better the object, C<$z>, returned from
IO::Compress::Bzip2 can be used exactly like an L<IO::File|IO::File> filehandle.
This means that all normal output file operations can be carried out
with C<$z>.
For example, to write to a compressed file/buffer you can use either of
these forms
$z->print("hello world\n");
print $z "hello world\n";
The mandatory parameter C<$output> is used to control the destination
of the compressed data. This parameter can take one of these forms.
=over 5
=item A filename
If the C<$output> parameter is a simple scalar, it is assumed to be a
filename. This file will be opened for writing and the compressed data
will be written to it.
=item A filehandle
If the C<$output> parameter is a filehandle, the compressed data will be
written to it.
The string '-' can be used as an alias for standard output.
=item A scalar reference
If C<$output> is a scalar reference, the compressed data will be stored
in C<$$output>.
=back
If the C<$output> parameter is any other type, C<IO::Compress::Bzip2>::new will
return undef.
=head2 Constructor Options
C<OPTS> is any combination of the following options:
=over 5
=item C<< AutoClose => 0|1 >>
This option is only valid when the C<$output> parameter is a filehandle. If
specified, and the value is true, it will result in the C<$output> being
closed once either the C<close> method is called or the C<IO::Compress::Bzip2>
object is destroyed.
This parameter defaults to 0.
=item C<< Append => 0|1 >>
Opens C<$output> in append mode.
The behaviour of this option is dependent on the type of C<$output>.
=over 5
=item * A Buffer
If C<$output> is a buffer and C<Append> is enabled, all compressed data
will be append to the end of C<$output>. Otherwise C<$output> will be
cleared before any data is written to it.
=item * A Filename
If C<$output> is a filename and C<Append> is enabled, the file will be
opened in append mode. Otherwise the contents of the file, if any, will be
truncated before any compressed data is written to it.
=item * A Filehandle
If C<$output> is a filehandle, the file pointer will be positioned to the
end of the file via a call to C<seek> before any compressed data is written
to it. Otherwise the file pointer will not be moved.
=back
This parameter defaults to 0.
=item C<< BlockSize100K => number >>
Specify the number of 100K blocks bzip2 uses during compression.
Valid values are from 1 to 9, where 9 is best compression.
The default is 1.
=item C<< WorkFactor => number >>
Specifies how much effort bzip2 should take before resorting to a slower
fallback compression algorithm.
Valid values range from 0 to 250, where 0 means use the default value 30.
The default is 0.
=item C<< Strict => 0|1 >>
This is a placeholder option.
=back
=head2 Examples
TODO
=head1 Methods
=head2 print
Usage is
$z->print($data)
print $z $data
Compresses and outputs the contents of the C<$data> parameter. This
has the same behaviour as the C<print> built-in.
Returns true if successful.
=head2 printf
Usage is
$z->printf($format, $data)
printf $z $format, $data
Compresses and outputs the contents of the C<$data> parameter.
Returns true if successful.
=head2 syswrite
Usage is
$z->syswrite $data
$z->syswrite $data, $length
$z->syswrite $data, $length, $offset
Compresses and outputs the contents of the C<$data> parameter.
Returns the number of uncompressed bytes written, or C<undef> if
unsuccessful.
=head2 write
Usage is
$z->write $data
$z->write $data, $length
$z->write $data, $length, $offset
Compresses and outputs the contents of the C<$data> parameter.
Returns the number of uncompressed bytes written, or C<undef> if
unsuccessful.
=head2 flush
Usage is
$z->flush;
Flushes any pending compressed data to the output file/buffer.
TODO
Returns true on success.
=head2 tell
Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
=head2 eof
Usage is
$z->eof();
eof($z);
Returns true if the C<close> method has been called.
=head2 seek
$z->seek($position, $whence);
seek($z, $position, $whence);
Provides a sub-set of the C<seek> functionality, with the restriction
that it is only legal to seek forward in the output file/buffer.
It is a fatal error to attempt to seek backward.
Empty parts of the file/buffer will have NULL (0x00) bytes written to them.
The C<$whence> parameter takes one the usual values, namely SEEK_SET,
SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
=head2 binmode
Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
=head2 opened
$z->opened()
Returns true if the object currently refers to a opened file/buffer.
=head2 autoflush
my $prev = $z->autoflush()
my $prev = $z->autoflush(EXPR)
If the C<$z> object is associated with a file or a filehandle, this method
returns the current autoflush setting for the underlying filehandle. If
C<EXPR> is present, and is non-zero, it will enable flushing after every
write/print operation.
If C<$z> is associated with a buffer, this method has no effect and always
returns C<undef>.
B<Note> that the special variable C<$|> B<cannot> be used to set or
retrieve the autoflush setting.
=head2 input_line_number
$z->input_line_number()
$z->input_line_number(EXPR)
This method always returns C<undef> when compressing.
=head2 fileno
$z->fileno()
fileno($z)
If the C<$z> object is associated with a file or a filehandle, C<fileno>
will return the underlying file descriptor. Once the C<close> method is
called C<fileno> will return C<undef>.
If the C<$z> object is associated with a buffer, this method will return
C<undef>.
=head2 close
$z->close() ;
close $z ;
Flushes any pending compressed data and then closes the output file/buffer.
For most versions of Perl this method will be automatically invoked if
the IO::Compress::Bzip2 object is destroyed (either explicitly or by the
variable with the reference to the object going out of scope). The
exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In
these cases, the C<close> method will be called automatically, but
not until global destruction of all live objects when the program is
terminating.
Therefore, if you want your scripts to be able to run on all versions
of Perl, you should call C<close> explicitly and not rely on automatic
closing.
Returns true on success, otherwise 0.
If the C<AutoClose> option has been enabled when the IO::Compress::Bzip2
object was created, and the object is associated with a file, the
underlying file will also be closed.
=head2 newStream([OPTS])
Usage is
$z->newStream( [OPTS] )
Closes the current compressed data stream and starts a new one.
OPTS consists of any of the options that are available when creating
the C<$z> object.
See the L</"Constructor Options"> section for more details.
=head1 Importing
No symbolic constants are required by this IO::Compress::Bzip2 at present.
=over 5
=item :all
Imports C<bzip2> and C<$Bzip2Error>.
Same as doing this
use IO::Compress::Bzip2 qw(bzip2 $Bzip2Error) ;
=back
=head1 EXAMPLES
=head2 Apache::GZip Revisited
See L<IO::Compress::FAQ|IO::Compress::FAQ/"Apache::GZip Revisited">
=head2 Working with Net::FTP
See L<IO::Compress::FAQ|IO::Compress::FAQ/"Compressed files and Net::FTP">
=head1 SEE ALSO
L<Compress::Zlib>, L<IO::Compress::Gzip>, L<IO::Uncompress::Gunzip>, L<IO::Compress::Deflate>, L<IO::Uncompress::Inflate>, L<IO::Compress::RawDeflate>, L<IO::Uncompress::RawInflate>, L<IO::Uncompress::Bunzip2>, L<IO::Compress::Lzma>, L<IO::Uncompress::UnLzma>, L<IO::Compress::Xz>, L<IO::Uncompress::UnXz>, L<IO::Compress::Lzop>, L<IO::Uncompress::UnLzop>, L<IO::Compress::Lzf>, L<IO::Uncompress::UnLzf>, L<IO::Uncompress::AnyInflate>, L<IO::Uncompress::AnyUncompress>
L<IO::Compress::FAQ|IO::Compress::FAQ>
L<File::GlobMapper|File::GlobMapper>, L<Archive::Zip|Archive::Zip>,
L<Archive::Tar|Archive::Tar>,
L<IO::Zlib|IO::Zlib>
The primary site for the bzip2 program is L<http://www.bzip.org>.
See the module L<Compress::Bzip2|Compress::Bzip2>
=head1 AUTHOR
This module was written by Paul Marquess, C<pmqs@cpan.org>.
=head1 MODIFICATION HISTORY
See the Changes file.
=head1 COPYRIGHT AND LICENSE
Copyright (c) 2005-2017 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.
|