qgis-common 1.7.4+1.7.5~20120320-1.1 / usr / share / qgis / doc / CODING

Quantum GIS (QGIS)
Developers guide for QGIS


------------------------------------------------------------------------


  1. QGIS Coding Standards
    1.1. Classes
      1.1.1. Names
      1.1.2. Members
      1.1.3. Accessor Functions
      1.1.4. Functions
    1.2. Qt Designer
      1.2.1. Generated Classes
      1.2.2. Dialogs
    1.3. C++ Files
      1.3.1. Names
      1.3.2. Standard Header and License
      1.3.3. Keyword Substitution
    1.4. Variable Names
    1.5. Enumerated Types
    1.6. Global Constants
    1.7. Editing
      1.7.1. Tabs
      1.7.2. Indentation
      1.7.3. Braces
    1.8. API Compatibility
    1.9. Coding Style
      1.9.1. Where-ever Possible Generalize Code
      1.9.2. Prefer Having Constants First in Predicates
      1.9.3. Whitespace Can Be Your Friend
      1.9.4. Add Trailing Identifying Comments
      1.9.5. Use Braces Even for Single Line Statements
      1.9.6. Book recommendations
  2. GIT Access
    2.1. Installation
      2.1.1. Install git for GNU/Linux
      2.1.2. Install git for Windows
      2.1.3. Install git for OSX
    2.2. Accessing the Repository
    2.3. Check out a branch
    2.4. QGIS documentation sources
    2.5. GIT Documentation
    2.6. Development in branches
      2.6.1. Purpose
      2.6.2. Procedure
    2.7. Submitting Patches
      2.7.1. Patch file naming
      2.7.2. Create your patch in the top level QGIS source dir
      2.7.3. Getting your patch noticed
      2.7.4. Due Diligence
    2.8. Obtaining GIT Write Access
  3. Unit Testing
    3.1. The QGIS testing framework  - an overview
    3.2. Creating a unit test
    3.3. Adding your unit test to CMakeLists.txt
    3.4. The ADD_QGIS_TEST macro explained
    3.5. Building your unit test
    3.6. Run your tests
  4. Getting up and running with QtCreator and QGIS
    4.1. Installing QtCreator
    4.2. Setting up your project
    4.3. Setting up your build environment
    4.4. Setting your run environment
    4.5. Running and debugging
  5. HIG (Human Interface Guidelines)
  6. Authors


------------------------------------------------------------------------


  1. QGIS Coding Standards
  ========================

These standards should be followed by all QGIS developers.


  1.1. Classes
  ============


    1.1.1. Names
    ============

Class in QGIS begin with Qgs and are formed using mixed case. 

  Examples:
    QgsPoint
    QgsMapCanvas
    QgsRasterLayer


    1.1.2. Members
    ==============

Class member names begin with a lower case m and are formed using mixed
case.

    mMapCanvas  
    mCurrentExtent

All class members should be private.
Public class members are STRONGLY discouraged


    1.1.3. Accessor Functions
    =========================

Class member values should be obtained through accesssor functions. The
function should be named without a get prefix. Accessor functions for the
two private members above would be: 

    mapCanvas()
    currentExtent()


    1.1.4. Functions
    ================

Function names begin with a lowercase letter and are formed using mixed case.
The function name should convey something about the purpose of the function.

    updateMapExtent()
    setUserOptions()


  1.2. Qt Designer
  ================


    1.2.1. Generated Classes
    ========================

QGIS classes that are generated from Qt Designer (ui) files should have a
Base suffix. This identifies the class as a generated base class.

  Examples:
    QgsPluginManagerBase
    QgsUserOptionsBase


    1.2.2. Dialogs
    ==============

All dialogs should implement the following:
 * Tooltip help for all toolbar icons and other relevant widgets
 * WhatsThis help for all widgets on the dialog
 * An optional (though highly recommended) context sensitive Help button
   that directs the user to the appropriate help page by launching their web
   browser


  1.3. C++ Files
  ==============


    1.3.1. Names
    ============

C++ implementation and header files should be have a .cpp and .h extension
respectively.  Filename should be all lowercase and, in the case of classes,
match the class name.

  Example:
    Class QgsFeatureAttribute source files are 
      qgsfeatureattribute.cpp and qgsfeatureattribute.h

/!\ Note: in case it is not clear from the statement above, for a filename 
to match a class name it implicitly means that each class should be declared 
and implemented in its own file. This makes it much easier for newcomers to 
identify where the code is relating to specific class.


    1.3.2. Standard Header and License
    ==================================

Each source file should contain a header section patterned after the following
example:

  /***************************************************************************
      qgsfield.cpp - Describes a field in a layer or table
       --------------------------------------
      Date                 : 01-Jan-2004
      Copyright            : (C) 2004 by Gary E.Sherman
      Email                : sherman at mrcc.com
  /***************************************************************************
   *                                                                         *
   *   This program is free software; you can redistribute it and/or modify  *
   *   it under the terms of the GNU General Public License as published by  *
   *   the Free Software Foundation; either version 2 of the License, or     *
   *   (at your option) any later version.                                   *
   *                                                                         *
   ***************************************************************************/


    1.3.3. Keyword Substitution
    ===========================

In the days of SVN we used to require that each source file should contain the
$Id$ keyword. Keyword substitution is not supported by GIT and so should no
longer be used.


  1.4. Variable Names
  ===================

Variable names begin with a lower case letter and are formed using mixed case.

  Examples:
    mapCanvas
    currentExtent


  1.5. Enumerated Types
  =====================

Enumerated types should be named in CamelCase with a leading capital e.g.:

      enum UnitType
      {
        Meters,
        Feet,
        Degrees,
        UnknownUnit
      } ;

Do not use generic type names that will conflict with other types. e.g. use
"UnkownUnit" rather than "Unknown"


  1.6. Global Constants
  =====================

Global constants should be written in upper case underscore separated e.g.:

  const long GEOCRS_ID = 3344;


  1.7. Editing
  ============

Any text editor/IDE can be used to edit QGIS code, providing the following
requirements are met.


    1.7.1. Tabs
    ===========

Set your editor to emulate tabs with spaces. Tab spacing should be set to 2
spaces.


    1.7.2. Indentation
    ==================

Source code should be indented to improve readability. There is a .indent.pro
file in the QGIS src directory that contains the switches to be used when
indenting code using the GNU indent program. If you don't use GNU indent, you
should emulate these settings.


    1.7.3. Braces
    =============

Braces should start on the line following the expression:

    if(foo == 1)
    {
      // do stuff
      ...
     }else
    {
      // do something else
      ...
    }

There is a scripts/prepare-commit.sh that looks up the changed files and
reindents them using astyle.  This should be run before committing.

As newer versions of astyle indent differently than the version used to do a
complete reindentation of the source, the script uses an old astyle version,
that we include in our repository.


  1.8. API Compatibility
  ======================

From QGIS 1.0 we will provide a stable, backwards compatible API. This will
provide a stable basis for people to develop against, knowing their code will
work against any of the 1.x QGIS releases (although recompiling may be
required).Cleanups to the API should be done in a manner similar to the
Trolltech developers e.g.

  class Foo 
  {
    public:
      /** This method will be deprecated, you are encouraged to use 
        doSomethingBetter() rather.
        @see doSomethingBetter()
       */
      bool doSomething();
  
      /** Does something a better way.
        @note This method was introduced in QGIS version 1.1
       */
      bool doSomethingBetter();
  
  }


  1.9. Coding Style
  =================

Here are described some programming hints and tips that will hopefully reduce
errors, development time, and maintenance.


    1.9.1. Where-ever Possible Generalize Code
    ==========================================

  If you are cut-n-pasting code, or otherwise writing the same thing more than
  once, consider consolidating the code into a single function.

This will:

- allow changes to be made in one location instead of in multiple places
- help prevent code bloat
- make it more difficult for multiple copies to evolve differences over time,
  thus making it harder to understand and maintain for others


    1.9.2. Prefer Having Constants First in Predicates
    ==================================================

Prefer to put constants first in predicates. 

  "0 == value" instead of "value == 0"

This will help prevent programmers from accidentally using "=" when they meant
to use "==", which can introduce very subtle logic bugs.  The compiler will
generate an error if you accidentally use "=" instead of "==" for comparisons
since constants inherently cannot be assigned values.


    1.9.3. Whitespace Can Be Your Friend
    ====================================

Adding spaces between operators, statements, and functions makes it easier for
humans to parse code.

Which is easier to read, this:

  if (!a&&b)

or this:

  if ( ! a && b )


    1.9.4. Add Trailing Identifying Comments
    ========================================

Adding comments at the end of function, struct and class implementations makes
it easier to find them later.

Consider that you're at the bottom of a source file and need to find a very
long function -- without these kinds of trailing comments you will have to page
up past the body of the function to find its name.  Of course this is ok if you
wanted to find the beginning of the function; but what if you were interested
at code near its end?  You'd have to page up and then back down again to the
desired part.

e.g.,

  void foo::bar()
  { 
      // ... imagine a lot of code here 
  } // foo::bar()


    1.9.5. Use Braces Even for Single Line Statements
    =================================================

Using braces for code in if/then blocks or similar code structures even for
single line statements means that adding another statement is less likely to
generate broken code.

Consider:

    if (foo)
      bar();
   else
      baz();

Adding code after bar() or baz() without adding enclosing braces would create
broken code.  Though most programmers would naturally do that, some may forget
to do so in haste.

So, prefer this:

   if (foo)
   {
     bar();
   }
   else
   { 
      baz();
   } 


    1.9.6. Book recommendations
    ===========================

- Effective C++ (http://www.awprofessional.com/title/0321334876), Scott Meyers
- More Effective C++ (http://www.awprofessional.com/bookstore/product.asp?isbn=020163371X&rl=1), Scott Meyers
- Effective STL (http://www.awprofessional.com/title/0201749629), Scott Meyers
- Design Patterns (http://www.awprofessional.com/title/0201634988), GoF

You should also really read this article from Qt Quarterly on 
http://doc.trolltech.com/qq/qq13-apis.html designing Qt style (APIs)


  2. GIT Access
  =============

This section describes how to get started using the QGIS GIT repository. Before you can do this, you need to first have a git client installed on your system.


  2.1. Installation
  =================


    2.1.1. Install git for GNU/Linux
    ================================

Debian based distro users can do:

  sudo apt-get install git


    2.1.2. Install git for Windows
    ==============================

Windows users can obtain msys git (http://code.google.com/p/msysgit/).


    2.1.3. Install git for OSX
    ==========================

The git (http://git-scm.com/) project has a downloadable build of git.
Make sure to get the package matching your processor (x86_64 most likely, only the first Intel Macs need the i386 package).

Once downloaded open the disk image and run the installer.

PPC/source note

The git site does not offer PPC builds.  If you need a PPC build, or you just want
a little more control over the installation, you need to compile it yourself.

Download the source from http://git-scm.com/.  Unzip it, and in a Terminal cd to the source folder, then:

  make prefix=/usr/local
  sudo make prefix=/usr/local install

If you don't need any of the extras, Perl, Python or TclTk (GUI), you can disable them before running make with:

  export NO_PERL=
  export NO_TCLTK=
  export NO_PYTHON=


  2.2. Accessing the Repository
  =============================

To clone QGIS master:

  git://github.com/qgis/Quantum-GIS.git


  2.3. Check out a branch
  =======================

To check out a branch, for example the release 1.7.0 branch do:

    cd Quantum-GIS
    git fetch
    git branch --track origin release-1_7_0
    git checkout release-1_7_0
    

To check out the master branch:

    cd Quantum-GIS
    git checkout master

/!\ Note: In QGIS we keep our most stable code in the current release branch.
Master contains code for the so called 'unstable' release series. Periodically
we will branch a release off master, and then continue stabilisation and selective
incorporation of new features into master.

See the INSTALL file in the source tree for specific instructions on building
development versions. 


  2.4. QGIS documentation sources
  ===============================

If you're interested in checking out Quantum GIS documentation sources:

    svn co https://svn.osgeo.org/qgis/docs/trunk qgis_docs

/!\ Note: This url will change to a git URL in the near future.

You can also take a look at DocumentationWritersCorner for more information.


  2.5. GIT Documentation
  ======================

See the following sites for information on becoming a GIT master.

http://gitref.org
http://progit.org
http://gitready.com


  2.6. Development in branches
  ============================


    2.6.1. Purpose
    ==============

The complexity of the QGIS source code has increased considerably during the
last years. Therefore it is hard to anticipate the side effects that the
addition of a feature will have. In the past, the QGIS project had very long
release cycles because it was a lot of work to reetablish the stability of the
software system after new features were added. To overcome these problems, QGIS
switched to a development model where new features are coded in GIT branches
first and merged to master (the main branch) when they are finished and stable.
This section describes the procedure for branching and merging in the QGIS
project.


    2.6.2. Procedure
    ================

- Initial announcement on mailing list:
Before starting, make an announcement on the developer mailing list to see if
another developer is already working on the same feature. Also contact the
technical advisor of the project steering committee (PSC). If the new feature
requires any changes to the QGIS architecture, a request for comment (RFC) is
needed. 

Create a branch: 
Create a new GIT branch for the development of the new feature. 

  git branch newfeature
  git checkout newfeature


Now you can start developing. If you plan to do extensive on that branch, would
like to share the work with other developers, and have write access to the
upstream repo, you can push your repo up to the QGIS official repo by doing:

  git push origin newfeature


Note: if the branch already exists your changes will be pushed into it.

Merge from master regularly:
It is recommended to merge the changes in master to the branch on a regular
basis. This makes it easier to merge the branch back to master later.

  git merge master


Documentation on wiki: 
It is also recommended to document the intended changes and the current status
of the work on a wiki page.

Testing before merging back to master: 
When you are finished with the new feature and happy with the stability, make
an announcement on the developer list.  Before merging back, the changes will
be tested by developers and users. Binary packages (especially for OsX and
Windows) will be generated to also involve non-developers. In trac, a new
Component will be opened to file tickets against.  Once there are no remaining
issues left, the technical advisor of the PSC merges the changes into master.


  2.7. Submitting Patches
  =======================

There are a few guidelines that will help you to get your patches into QGIS
easily, and help us deal with the patches that are sent to use easily.


    2.7.1. Patch file naming
    ========================

If the patch is a fix for a specific bug, please name the file with the bug
number in it e.g.  bug777fix.patch, and attach it to the original bug report
in trac (http://hub.qgis.org/projects/quantum-gis).

If the bug is an enhancement or new feature, its usually a good idea to create
a ticket in trac (http://hub.qgis.org/projects/quantum-gis) first and then attach you 


    2.7.2. Create your patch in the top level QGIS source dir
    =========================================================

This makes it easier for us to apply the patches since we don't need to
navigate to a specific place in the source tree to apply the patch. Also when I
receive patches I usually evaluate them using merge, and having the patch
from the top level dir makes this much easier. Below is an example of how you
can include multiple changed files into your patch from the top level
directory:

  cd Quantum-GIS
  git checkout master
  git pull origin master
  git checkout newfeature
  git format-patch master --stdout > bug777fix.patch

This will make sure your master branch is in sync with the upstream repository,
and then generate a patch which contains the delta between your feature branch
and what is in the master branch.


    2.7.3. Getting your patch noticed
    =================================

QGIS developers are busy folk. We do scan the incoming patches on bug reports
but sometimes we miss things.  Don't be offended or alarmed. Try to identify a
developer to help you - using the Project Organigram (http://www.qgis.org/wiki/Project_Organigram) and contact them
asking them if they can look at your patch. If you don't get any response, you
can escalate your query to one of the Project Steering Committee members
(contact details also available on the Project Organigram).


    2.7.4. Due Diligence
    ====================

QGIS is licensed under the GPL. You should make every effort to ensure you only
submit patches which are unencumbered by conflicting intellectual property
rights. Also do not submit code that you are not happy to have made available
under the GPL.


  2.8. Obtaining GIT Write Access
  ===============================

Write access to QGIS source tree is by invitation. Typically when a person
submits several (there is no fixed number here) substantial patches that
demonstrate basic competence and understanding of C++ and QGIS coding
conventions, one of the PSC members or other existing developers can nominate
that person to the PSC for granting of write access. The nominator should give
a basic promotional paragraph of why they think that person should gain write
access. In some cases we will grant write access to non C++ developers e.g. for
translators and documentors.  In these cases, the person should still have
demonstrated ability to submit patches and should ideally have submitted several
substantial patches that demonstrate their understanding of modifying the code
base without breaking things, etc.

Note: Since moving to GIT, we are less likely to grant write access to new
developers since it is trivial to share code within github by forking QGIS and
then issuing pull requests.

Always check that everything compiles before making any commits / pull
requests.  Try to be aware of possible breakages your commits may cause for
people building on other platforms and with older / newer versions of
libraries.

When making a commit, your editor (as defined in $EDITOR environment variable)
will appear and you should make a comment at the top of the file (above the
area that says 'don't change this'. Put a descriptive comment and rather do
several small commits if the changes across a number of files are unrelated.
Conversely we prefer you to group related changes into a single commit.


  3. Unit Testing
  ===============

As of November 2007 we require all new features going into master to be
accompanied with a unit test. Initially we have limited this requirement to
qgis_core, and we will extend this requirement to other parts of the code base
once people are familiar with the procedures for unit testing explained in the
sections that follow.


  3.1. The QGIS testing framework  - an overview
  ==============================================

Unit testing is carried out using a combination of QTestLib (the Qt testing
library) and CTest (a framework for compiling and running tests as part of the
CMake build process).  Lets take an overview of the process before I delve into
the details:

- There is some code you want to test, e.g. a class or function. Extreme
   programming advocates suggest that the code should not even be written yet 
   when you start building your tests, and then as you implement your code you can
   immediately validate each new functional part you add with your test. In
   practive you will probably need to write tests for pre-existing code in QGIS
   since we are starting with a testing framework well after much application
   logic has already been implemented.

- You create a unit test. This happens under <QGIS Source Dir>/tests/src/core 
   in the case of the core lib. The test is basically a client that creates an
   instance of a class and calls some methods on that class. It will check the
   return from each method to make sure it matches the expected value. If any
   one of the calls fails, the unit will fail.

- You include QtTestLib macros in your test class. This macro is processed by 
   the Qt meta object compiler (moc) and expands your test class into a
   runnable application. 

- You add a section to the CMakeLists.txt in your tests directory that will
   build your test.

- You ensure you have ENABLE_TESTING enabled in ccmake / cmakesetup. This 
   will ensure your tests actually get compiled when you type make.

- You optionally add test data to <QGIS Source Dir>/tests/testdata if your 
   test is data driven (e.g. needs to load a shapefile). These test data should
   be as small as possible and wherever possible you should use the existing
   datasets already there. Your tests should never modify this data in situ,
   but rather may a temporary copy somewhere if needed.

- You compile your sources and install. Do this using normal make && (sudo) 
   make install procedure.

- You run your tests. This is normally done simply by doing make test 
 after the make install step, though I will explain other aproaches that offer
 more fine grained control over running tests.


Right with that overview in mind, I will delve into a bit of detail. I've
already done much of the configuration for you in CMake and other places in the
source tree so all you need to do are the easy bits - writing unit tests!


  3.2. Creating a unit test
  =========================

Creating a unit test is easy - typically you will do this by just creating a
single .cpp file (not .h file is used) and implement all your test methods as
public methods that return void. I'll use a simple test class for
QgsRasterLayer throughout the section that follows to illustrate. By convention
we will name our test with the same name as the class they are testing but
prefixed with 'Test'.  So our test implementation goes in a file called
testqgsrasterlayer.cpp and the class itself will be TestQgsRasterLayer. First
we add our standard copyright banner:

  /***************************************************************************
       testqgsvectorfilewriter.cpp
       --------------------------------------
      Date                 : Frida  Nov 23  2007
      Copyright            : (C) 2007 by Tim Sutton
      Email                : tim@linfiniti.com
   ***************************************************************************
   *                                                                         *
   *   This program is free software; you can redistribute it and/or modify  *
   *   it under the terms of the GNU General Public License as published by  *
   *   the Free Software Foundation; either version 2 of the License, or     *
   *   (at your option) any later version.                                   *
   *                                                                         *
   ***************************************************************************/

Next we use start our includes needed for the tests we plan to run. There is 
one special include all tests should have:

  #include <QtTest>

Note that we use the new style Qt4 includes - i.e. QtTest is included not
qttest.h

Beyond that you just continue implementing your class as per normal, pulling 
in whatever headers you may need:

  //Qt includes...
  #include <QObject>
  #include <QString>
  #include <QObject>
  #include <QApplication>
  #include <QFileInfo>
  #include <QDir>
  
  //qgis includes...
  #include <qgsrasterlayer.h> 
  #include <qgsrasterbandstats.h> 
  #include <qgsapplication.h>

Since we are combining both class declaration and implementation in a single
file the class declaration comes next. We start with our doxygen documentation.
Every test case should be properly documented. We use the doxygen ingroup
directive so that all the UnitTests appear as a module in the generated Doxygen
documentation. After that comes a short description of the unit test:

  /** \ingroup UnitTests
   * This is a unit test for the QgsRasterLayer class.
   */

The class must inherit from QObject and include the Q_OBJECT macro.

  class TestQgsRasterLayer: public QObject
  {
    Q_OBJECT;

All our test methods are implemented as private slots. The QtTest framework
will sequentially call each private slot method in the test class. There are
four 'special' methods which if implemented will be called at the start of the
unit test (initTestCase), at the end of the unit test
(cleanupTestCase).  Before each test method is called, the init()
method will be called and after each test method is called the cleanup()
method is called. These methods are handy in that they allow you to allocate
and cleanup resources prior to running each test, and the test unit as a whole.

  private slots:
    // will be called before the first testfunction is executed.
    void initTestCase();
    // will be called after the last testfunction was executed.
    void cleanupTestCase(){};
    // will be called before each testfunction is executed.
    void init(){};
    // will be called after every testfunction.
    void cleanup();

Then come your test methods, all of which should take no parameters and
should return void. The methods will be called in order of declaration.  I
am implementing two methods here which illustrates to types of testing. In the
first case I want to generally test the various parts of the class are working,
I can use a functional testing approach. Once again, extreme programmers
would advocate writing these tests before implementing the class. Then as
you work your way through your class implementation you iteratively run your
unit tests. More and more test functions should complete sucessfully as your
class implementation work progresses, and when the whole unit test passes, your
new class is done and is now complete with a repeatable way to validate it.

Typically your unit tests would only cover the public API of your class,
and normally you do not need to write tests for accessors and mutators.  If it
should happen that an acccessor or mutator is not working as expected you would
normally implement a regression test to check for this (see lower down).

    //
    // Functional Testing
    //
    
    /** Check if a raster is valid. */
    void isValid();
  
    // more functional tests here ...

Next we implement our regression tests. Regression tests should be
implemented to replicate the conditions of a particular bug. For example I
recently received a report by email that the cell count by rasters was off by
1, throwing off all the statistics for the raster bands. I opened a bug (ticket
#832) and then created a regression test that replicated the bug using a small
test dataset (a 10x10 raster). Then I ran the test and ran it, verifying that
it did indeed fail (the cell count was 99 instead of 100). Then I went to fix
the bug and reran the unit test and the regression test passed. I committed the
regression test along with the bug fix. Now if anybody breakes this in the
source code again in the future, we can immediatly identify that the code has
regressed. Better yet before committing any changes in the future, running our
tests will ensure our changes don't have unexpected side effects - like breaking
existing functionality.

There is one more benifit to regression tests - they can save you time.  If you
ever fixed a bug that involved making changes to the source, and then running
the application and performing a series of convoluted steps to replicate the
issue, it will be immediately apparent that simply implementing your regression
test before fixing the bug will let you automate the testing for bug
resolution in an efficient manner.

To implement your regression test, you should follow the naming convention of
regression<TicketID> for your test functions. If no redmine ticket exists for the
regression, you should create one first.  Using this approach allows the person
running a failed regression test easily go and find out more information.

    //
    // Regression Testing
    //
    
    /** This is our second test case...to check if a raster
     reports its dimensions properly. It is a regression test 
     for ticket #832 which was fixed with change r7650. 
     */
    void regression832(); 
    
    // more regression tests go here ...

Finally in our test class declaration you can declare privately any data
members and helper methods your unit test may need. In our case I will declare
a QgsRasterLayer * which can be used by any of our test methods. The raster
layer will be created in the initTestCase() function which is run before any
other tests, and then destroyed using cleanupTestCase() which is run after all
tests. By declaring helper methods (which may be called by various test
functions) privately, you can ensure that they wont be automatically run by the
QTest executeable that is created when we compile our test.

    private:
      // Here we have any data structures that may need to 
      // be used in many test cases.
      QgsRasterLayer * mpLayer;
  };
  

That ends our class declaration. The implementation is simply inlined in the
same file lower down. First our init and cleanup functions:

  void TestQgsRasterLayer::initTestCase()
  {
    // init QGIS's paths - true means that all path will be inited from prefix
    QString qgisPath = QCoreApplication::applicationDirPath ();
    QgsApplication::setPrefixPath(qgisPath, TRUE);
  #ifdef Q_OS_LINUX
    QgsApplication::setPkgDataPath(qgisPath + "/../share/qgis");
  #endif
    //create some objects that will be used in all tests...
  
    std::cout << "Prefix  PATH: " << QgsApplication::prefixPath().toLocal8Bit().data() << std::endl;
    std::cout << "Plugin  PATH: " << QgsApplication::pluginPath().toLocal8Bit().data() << std::endl;
    std::cout << "PkgData PATH: " << QgsApplication::pkgDataPath().toLocal8Bit().data() << std::endl;
    std::cout << "User DB PATH: " << QgsApplication::qgisUserDbFilePath().toLocal8Bit().data() << std::endl;
  
    //create a raster layer that will be used in all tests...
    QString myFileName (TEST_DATA_DIR); //defined in CmakeLists.txt
    myFileName = myFileName + QDir::separator() + "tenbytenraster.asc";
    QFileInfo myRasterFileInfo ( myFileName );
    mpLayer = new QgsRasterLayer ( myRasterFileInfo.filePath(),
              myRasterFileInfo.completeBaseName() );
  }
  
  void TestQgsRasterLayer::cleanupTestCase()
  {
    delete mpLayer;
  }
  

The above init function illustrates a couple of interesting things.

 1. I needed to manually set the QGIS application data path so that
   resources such as srs.db can be found properly.
 2. Secondly, this is a data driven test so we needed to provide a 
   way to generically locate the 'tenbytenraster.asc file. This was 
   achieved by using the compiler define TEST_DATA_PATH. The 
   define is created in the CMakeLists.txt configuration file under 
   <QGIS Source Root>/tests/CMakeLists.txt and is available to all 
   QGIS unit tests. If you need test data for your test, commit it 
   under <QGIS Source Root>/tests/testdata. You should only commit 
   very small datasets here. If your test needs to modify the test 
   data, it should make a copy of if first.

Qt also provides some other interesting mechanisms for data driven 
testing, so if you are interested to know more on the topic, consult 
the Qt documentation.

Next lets look at our functional test. The isValid() test simply checks the
raster layer was correctly loaded in the initTestCase.  QVERIFY is a Qt macro
that you can use to evaluate a test condition.  There are a few other use
macros Qt provide for use in your tests including:

  QCOMPARE ( actual, expected )
  QEXPECT_FAIL ( dataIndex, comment, mode )
  QFAIL ( message )
  QFETCH ( type, name )
  QSKIP ( description, mode )
  QTEST ( actual, testElement )
  QTEST_APPLESS_MAIN ( TestClass )
  QTEST_MAIN ( TestClass )
  QTEST_NOOP_MAIN ()
  QVERIFY2 ( condition, message )
  QVERIFY ( condition )
  QWARN ( message ) 

Some of these macros are useful only when using the Qt framework for data
driven testing (see the Qt docs for more detail).

  void TestQgsRasterLayer::isValid()
  {
    QVERIFY ( mpLayer->isValid() );
  }

Normally your functional tests would cover all the range of functionality of
your classes public API where feasible. With our functional tests out the way,
we can look at our regression test example.

Since the issue in bug #832 is a misreported cell count, writing our test if
simply a matter of using QVERIFY to check that the cell count meets the
expected value:

  void TestQgsRasterLayer::regression832()
  {
     QVERIFY ( mpLayer->getRasterXDim() == 10 );
     QVERIFY ( mpLayer->getRasterYDim() == 10 );
     // regression check for ticket #832
     // note getRasterBandStats call is base 1
     QVERIFY ( mpLayer->getRasterBandStats(1).elementCountInt == 100 );
  }

With all the unit test functions implemented, there one final thing we need to
add to our test class:

  QTEST_MAIN(TestQgsRasterLayer)
  #include "moc_testqgsrasterlayer.cxx"

The purpose of these two lines is to signal to Qt's moc that his is a QtTest
(it will generate a main method that in turn calls each test funtion.  The last
line is the include for the MOC generated sources. You should replace
'testqgsrasterlayer' with the name of your class in lower case.


  3.3. Adding your unit test to CMakeLists.txt
  ============================================

Adding your unit test to the build system is simply a matter of editing the
CMakeLists.txt in the test directory, cloning one of the existing test blocks,
and then replacing your test class name into it.  For example:

  # QgsRasterLayer test
  ADD_QGIS_TEST(rasterlayertest testqgsrasterlayer.cpp)


  3.4. The ADD_QGIS_TEST macro explained
  ======================================

I'll run through these lines briefly to explain what they do, but if you are
not interested, just do the step explained in the above section and section.

  MACRO (ADD_QGIS_TEST testname testsrc)
    SET(qgis_${testname}_SRCS ${testsrc} ${util_SRCS})
    SET(qgis_${testname}_MOC_CPPS ${testsrc})
    QT4_WRAP_CPP(qgis_${testname}_MOC_SRCS ${qgis_${testname}_MOC_CPPS})
    ADD_CUSTOM_TARGET(qgis_${testname}moc ALL DEPENDS ${qgis_${testname}_MOC_SRCS})
    ADD_EXECUTABLE(qgis_${testname} ${qgis_${testname}_SRCS})
    ADD_DEPENDENCIES(qgis_${testname} qgis_${testname}moc)
    TARGET_LINK_LIBRARIES(qgis_${testname} ${QT_LIBRARIES} qgis_core)
    SET_TARGET_PROPERTIES(qgis_${testname}
      PROPERTIES
      # skip the full RPATH for the build tree
      SKIP_BUILD_RPATH  TRUE
      # when building, use the install RPATH already
      # (so it doesn't need to relink when installing)
      BUILD_WITH_INSTALL_RPATH TRUE
      # the RPATH to be used when installing
      INSTALL_RPATH ${QGIS_LIB_DIR}
      # add the automatically determined parts of the RPATH
      # which point to directories outside the build tree to the install RPATH
      INSTALL_RPATH_USE_LINK_PATH true)
    IF (APPLE)
      # For Mac OS X, the executable must be at the root of the bundle's executable folder
      INSTALL(TARGETS qgis_${testname} RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX})
      ADD_TEST(qgis_${testname} ${CMAKE_INSTALL_PREFIX}/qgis_${testname})
    ELSE (APPLE)
      INSTALL(TARGETS qgis_${testname} RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
      ADD_TEST(qgis_${testname} ${CMAKE_INSTALL_PREFIX}/bin/qgis_${testname})
    ENDIF (APPLE)
  ENDMACRO (ADD_QGIS_TEST)

Lets look a little more in detail at the individual lines. First we define the
list of sources for our test. Since we have only one source file (following the
methodology I described above where class declaration and definition are in the
same file) its a simple statement:

  SET(qgis_${testname}_SRCS ${testsrc} ${util_SRCS})

Since our test class needs to be run through the Qt meta object compiler (moc)
we need to provide a couple of lines to make that happen too:

  SET(qgis_${testname}_MOC_CPPS ${testsrc})
  QT4_WRAP_CPP(qgis_${testname}_MOC_SRCS ${qgis_${testname}_MOC_CPPS})
  ADD_CUSTOM_TARGET(qgis_${testname}moc ALL DEPENDS ${qgis_${testname}_MOC_SRCS})

Next we tell cmake that it must make an executeable from the test class.
Remember in the previous section on the last line of the class implementation I
included the moc outputs directly into our test class, so that will give it
(among other things) a main method so the class can be compiled as an
executeable:

  ADD_EXECUTABLE(qgis_${testname} ${qgis_${testname}_SRCS})
  ADD_DEPENDENCIES(qgis_${testname} qgis_${testname}moc)

Next we need to specify any library dependencies. At the moment classes have
been implemented with a catch-all QT_LIBRARIES dependency, but I will be
working to replace that with the specific Qt libraries that each class needs
only. Of course you also need to link to the relevant qgis libraries as
required by your unit test.

  TARGET_LINK_LIBRARIES(qgis_${testname} ${QT_LIBRARIES} qgis_core)

Next I tell cmake to install the tests to the same place as the qgis binaries
itself. This is something I plan to remove in the future so that the tests can
run directly from inside the source tree.

  SET_TARGET_PROPERTIES(qgis_${testname}
    PROPERTIES
    # skip the full RPATH for the build tree
    SKIP_BUILD_RPATH  TRUE
    # when building, use the install RPATH already
    # (so it doesn't need to relink when installing)
    BUILD_WITH_INSTALL_RPATH TRUE
    # the RPATH to be used when installing
    INSTALL_RPATH ${QGIS_LIB_DIR}
    # add the automatically determined parts of the RPATH
    # which point to directories outside the build tree to the install RPATH
    INSTALL_RPATH_USE_LINK_PATH true)
  IF (APPLE)
    # For Mac OS X, the executable must be at the root of the bundle's executable folder
    INSTALL(TARGETS qgis_${testname} RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX})
    ADD_TEST(qgis_${testname} ${CMAKE_INSTALL_PREFIX}/qgis_${testname})
  ELSE (APPLE)
    INSTALL(TARGETS qgis_${testname} RUNTIME DESTINATION ${CMAKE_INSTALL_PREFIX}/bin)
    ADD_TEST(qgis_${testname} ${CMAKE_INSTALL_PREFIX}/bin/qgis_${testname})
  ENDIF (APPLE)

Finally the above uses ADD_TEST to register the test with cmake / ctest . Here
is where the best magic happens - we register the class with ctest. If you
recall in the overview I gave in the beginning of this section we are using
both QtTest and CTest together. To recap, QtTest adds a main method to your
test unit and handles calling your test methods within the class. It also
provides some macros like QVERIFY that you can use as to test for failure of
the tests using conditions. The output from a QtTest unit test is an
executeable which you can run from the command line.  However when you have a
suite of tests and you want to run each executeable in turn, and better yet
integrate running tests into the build process, the CTest is what we use. 


  3.5. Building your unit test
  ============================

To build the unit test you need only to make sure that ENABLE_TESTS=true in the
cmake configuration. There are two ways to do this:

 1. Run ccmake .. (cmakesetup .. under windows) and interactively set 
 the ENABLE_TESTS flag to ON.
 1. Add a command line flag to cmake e.g. cmake -DENABLE_TESTS=true ..

Other than that, just build QGIS as per normal and the tests should build too.


  3.6. Run your tests
  ===================

The simplest way to run the tests is as part of your normal build process:

  make && make install && make test

The make test command will invoke CTest which will run each test that was
registered using the ADD_TEST CMake directive described above. Typical output
from make test will look like this:

  Running tests...
  Start processing tests
  Test project /Users/tim/dev/cpp/qgis/build
  1/  3 Testing qgis_applicationtest          ***Exception: Other
  2/  3 Testing qgis_filewritertest           *** Passed
  3/  3 Testing qgis_rasterlayertest          *** Passed
  
  0% tests passed, 3 tests failed out of 3
  
    The following tests FAILED:
    1 - qgis_applicationtest (OTHER_FAULT)
    Errors while running CTest
    make: *** [test] Error 8

If a test fails, you can use the ctest command to examine more closely why it
failed. User the -R option to specify a regex for which tests you want to run
and -V to get verbose output:

  [build] ctest -R appl -V
  Start processing tests
  Test project /Users/tim/dev/cpp/qgis/build
  Constructing a list of tests
  Done constructing a list of tests
  Changing directory into /Users/tim/dev/cpp/qgis/build/tests/src/core
  1/  3 Testing qgis_applicationtest          
  Test command: /Users/tim/dev/cpp/qgis/build/tests/src/core/qgis_applicationtest
  ********* Start testing of TestQgsApplication *********
    Config: Using QTest library 4.3.0, Qt 4.3.0
  PASS   : TestQgsApplication::initTestCase()
    Prefix  PATH: /Users/tim/dev/cpp/qgis/build/tests/src/core/../
    Plugin  PATH: /Users/tim/dev/cpp/qgis/build/tests/src/core/..//lib/qgis
    PkgData PATH: /Users/tim/dev/cpp/qgis/build/tests/src/core/..//share/qgis
    User DB PATH: /Users/tim/.qgis/qgis.db
  PASS   : TestQgsApplication::getPaths()
    Prefix  PATH: /Users/tim/dev/cpp/qgis/build/tests/src/core/../
    Plugin  PATH: /Users/tim/dev/cpp/qgis/build/tests/src/core/..//lib/qgis
    PkgData PATH: /Users/tim/dev/cpp/qgis/build/tests/src/core/..//share/qgis
    User DB PATH: /Users/tim/.qgis/qgis.db
    QDEBUG : TestQgsApplication::checkTheme() Checking if a theme icon exists:
    QDEBUG : TestQgsApplication::checkTheme() 
    /Users/tim/dev/cpp/qgis/build/tests/src/core/..//share/qgis/themes/default//mIconProjectionDisabled.png
    FAIL!  : TestQgsApplication::checkTheme() '!myPixmap.isNull()' returned FALSE. ()
    Loc: [/Users/tim/dev/cpp/qgis/tests/src/core/testqgsapplication.cpp(59)]
  PASS   : TestQgsApplication::cleanupTestCase()
    Totals: 3 passed, 1 failed, 0 skipped
    ********* Finished testing of TestQgsApplication *********
    -- Process completed
    ***Failed
  
    0% tests passed, 1 tests failed out of 1
  
    The following tests FAILED:
  1 - qgis_applicationtest (Failed)
    Errors while running CTest
  

Well that concludes this section on writing unit tests in QGIS. We hope you
will get into the habit of writing test to test new functionality and to check
for regressions. Some aspects of the test system (in particular the
CMakeLists.txt parts) are still being worked on so that the testing framework
works in a truly platform way. I will update this document as things
progress.


  4. Getting up and running with QtCreator and QGIS
  =================================================

QtCreator is a newish IDE from the makers of the Qt library. With QtCreator you
can build any C++ project, but it's really optimised for people working on
Qt(4) based applications (including mobile apps). Everything I describe below
assumes you are running Ubuntu 11.04 'Natty'.


  4.1. Installing QtCreator
  =========================

This part is easy:

  sudo apt-get install qtcreator qtcreator-doc

After installing you should find it in your gnome menu.


  4.2. Setting up your project
  ============================

I'm assuming you have already got a local Quantum-GIS clone containing the
source code, and have installed all needed build dependencies etc. There are
detailed in instructions on doing that here:

http://github.com/qgis/Quantum-GIS/blob/master/CODING

On my system I have checked out the code into $HOME/dev/cpp/Quantum-GIS and the
rest of the article is written assuming that, you should update these paths as
appropriate for your local system.

On launching QtCreator do:

  File->Open File or Project

Then use the resulting file selection dialog to browse to and open this file:

  $HOME/dev/cpp/Quantum-GIS/CMakeLists.txt

[images/image01.jpeg]

Next you will be prompted for a build location. I create a specific build dir
for QtCreator to work in under:

  $HOME/dev/cpp/Quantum-GIS/build-master-qtcreator

Its probably a good idea to create separate build directories for different
branches if you can afford the disk space.

[images/image02.jpeg]

Next you will be asked if you have any CMake build options to pass to CMake. We
will tell CMake that we want a debug build by adding this option:

  -DCMAKE_BUILD_TYPE=Debug

[images/image03.jpeg]

Thats the basics of it. When you complete the Wizard, QtCreator will start
scanning the source tree for autocompletion support and do some other
housekeeping stuff in the background. We want to tweak a few things before we
start to build though.


  4.3. Setting up your build environment
  ======================================

Click on the 'Projects' icon on the left of the QtCreator window.

[images/image04.jpeg]

Select the build settings tab (normally active by default).

[images/image05.jpeg]

We now want to add a custom process step. Why? Because QGIS can currently only
run from an install directory, not its build directory, so we need to ensure
that it is installed whenever we build it.  Under 'Build Steps', click on the
'Add Build  Step' combo button and choose 'Custom Process Step'.

[images/image06.jpeg]

Now we set the following details:

  Enable custom process step [yes]
  Command: make
  Working directory: $HOME/dev/cpp/Quantum-GIS/build-master-qtcreator
  Command arguments: install

[images/image07.jpeg]

You are almost ready to build. Just one note: QtCreator will need write
permissions on the install prefix.  By default (which I am using here) QGIS is
going to get installed to /usr/local. For my purposes on my development
machine, I just gave myself write permissions to the /usr/local directory.

To start the build, click that big hammer icon on the bottom left of the
window.

[images/image08.jpeg]


  4.4. Setting your run environment
  =================================

As mentioned above, we cannot run QGIS from directly in the build directly, so
we need to create a custom run target to tell QtCreator to run QGIS from the
install dir (in my case /usr/local/). To do that, return to the projects
configuration screen.

[images/image04.jpeg]

Now select the 'Run Settings' tab

[images/image09.jpeg]

We need to update the default run settings from using the 'qgis' run
configuration to using a custom one.

[images/image10.jpeg]

Do do that, click the 'Add v' combo button next to the Run configuration
combo and choose 'Custom Executable' from the top of the list.

[images/image11.jpeg]

Now in the properties area set the following details:

  Executable: /usr/local/bin/qgis
  Arguments :
  Working directory: $HOME
  Run in terminal: [no]
  Debugger: C++ [yes]
            Qml [no]

Then click the 'Rename' button and give your custom executable a meaning full
name e.g. 'Installed QGIS'

[images/image12.jpeg]          


  4.5. Running and debugging
  ==========================

Now you are ready to run and debug QGIS. To set a break point, simply open a
source file and click in the left column.

[images/image14.jpeg]

Now launch QGIS under the debugger by clicking the icon with a bug on it in the
bottom left of the window.

[images/image13.jpeg]          


  5. HIG (Human Interface Guidelines)
  ===================================

In order for all graphical user interface elements to appear consistant and to
all the user to instinctively use dialogs, it is important that the following
guidelines are followed in layout and design of GUIs.

 1. Group related elements using group boxes:
   Try to identify elements that can be grouped together and then use group
   boxes with a label to identify the topic of that group.  Avoid using group
   boxes with only a single widget / item inside.
 2. Capitalise first letter only in labels:
   Labels (and group box labels) should be written as a phrase with leading
   capital letter, and all remaing words written with lower case first letters 
 3. Do not end labels for widgets or group boxes with a colon:
   Adding a colon causes visual noise and does not impart additional meaning,
   so don't use them. An exception to this rule is when you have two labels next
   to each other e.g.: Label1 Plugin (Path:) Label2 [/path/to/plugins]
 4. Keep harmful actions away from harmless ones:
   If you have actions for 'delete', 'remove' etc, try to impose adequate space
   between the harmful action and innocuous actions so that the users is less
   likely to inadvertantly click on the harmful action.
 5. Always use a QButtonBox for 'OK', 'Cancel' etc buttons:
   Using a button box will ensure that the order of 'OK' and 'Cancel' etc,
   buttons is consistent with the operating system / locale / desktop
   environment that the user is using.
 6. Tabs should not be nested. If you use tabs, follow the style of the
   tabs used in QgsVectorLayerProperties / QgsProjectProperties etc.
   i.e. tabs at top with icons at 22x22.
 7. Widget stacks should be avoided if at all possible. They cause problems with 
   layouts and inexplicable (to the user) resizing of dialogs to accommodate 
   widgets that are not visible.
 8. Try to avoid technical terms and rather use a laymans equivalent e.g. use
   the word 'Transparency' rather than 'Alpha Channel' (contrived example),
   'Text' instead of 'String' and so on.
 9. Use consistent iconography. If you need an icon or icon elements, please
   contact Robert Szczepanek on the mailing list for assistance.
 10. Place long lists of widgets into scroll boxes. No dialog should exceed 580
   pixels in height and 1000 pixels in width.
 11. Separate advanced options from basic ones. Novice users should be able to
   quickly access the items needed for basic activities without needing to
   concern themselves with complexity of advanced features. Advanced features
   should either be located below a dividing line, or placed onto a separate tab.
 12. Don't add options for the sake of having lots of options. Strive to keep the
   user interface minimalistic and use sensible defaults.
 13. If clicking a button will spawn a new dialog, an ellipsis (...) should be
   suffixed to the button text.


  6. Authors
  ==========

- Tim Sutton (author and editor)
- Gary Sherman
- Marco Hugentobler

Original pages from wiki to deprecate:

- http://wiki.qgis.org/qgiswiki/CodingGuidelines (./)
- http://wiki.qgis.org/qgiswiki/CodingStandards (./)
- http://wiki.qgis.org/qgiswiki/UsingSubversion (./)
- http://www.qgis.org/wiki/How_to_debug_QGIS_Plugins
- http://wiki.qgis.org/qgiswiki/DevelopmentInBranches (./)
- http://wiki.qgis.org/qgiswiki/SubmittingPatchesAndSvnAccess (./)