/usr/share/doc/netwox-doc/tools/45.html is in netwox-doc 5.36.0-1.2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 | <HTML>
<HEAD>
<TITLE>Tool 45: Spoof of packet samples : fragment, ip4opt:lsrr</TITLE>
</HEAD>
<BODY BGCOLOR="#FFFFFF">
<CENTER> <H3>Tool 45: Spoof of packet samples : fragment, ip4opt:lsrr</H3>
</CENTER>
<P><H3>Description:</H3>
<PRE>
This tool sends hardcoded packet samples. Samples are (--sample
defines number): 1=udp_syslog, 2=tcp_syn, 3=tcpsynack, 4=tcpack,
5=ping.
Packets contain IP4 options and can be fragmented before been sent.
IP4 options contains a Loose Source Record Route option.
Parameter --spoofip indicates how to generate link layer for spoofing.
Values 'best', 'link' or 'raw' are common choices for --spoofip. Here
is the list of accepted values:
- 'raw' means to spoof at IP4/IP6 level (it uses system IP stack). If
a firewall is installed, or on some systems, this might not work.
- 'linkf' means to spoof at link level (currently, only Ethernet is
supported). The 'f' means to Fill source Ethernet address.
However, if source IP address is spoofed, it might be impossible
to Fill it. So, linkf will not work: use linkb or linkfb instead.
- 'linkb' means to spoof at link level. The 'b' means to left a Blank
source Ethernet address (0:0:0:0:0:0, do not try to Fill it).
- 'linkfb' means to spoof at link level. The 'f' means to try to Fill
source Ethernet address, but if it is not possible, it is left
Blank.
- 'rawlinkf' means to try 'raw', then try 'linkf'
- 'rawlinkb' means to try 'raw', then try 'linkb'
- 'rawlinkfb' means to try 'raw', then try 'linkfb'
- 'linkfraw' means to try 'linkf', then try 'raw'
- 'linkbraw' means to try 'linkb', then try 'raw'
- 'linkfbraw' means to try 'linkfb', then try 'raw'
- 'link' is an alias for 'linkfb'
- 'rawlink' is an alias for 'rawlinkfb'
- 'linkraw' is an alias for 'linkfbraw'
- 'best' is an alias for 'linkraw'. It should work in all cases.
This tool may need to be run with admin privilege in order to spoof.
</PRE>
<P><H3>Synonyms:</H3>
ip4 option, send<BR>
<P><H3>Usage:</H3>
netwox 45 [-s ip] [-d ip] [-S port] [-D port] [-n uint32] [-f uint32] [-x|+x] [-i ips] [-a spoofip]<BR>
<P><H3>Parameters:</H3>
<TABLE BORDER=1 CELLPADDING=4>
<TR>
<TD ALIGN=middle><I>parameter</I></TD>
<TD ALIGN=middle><I>description</I></TD>
<TD ALIGN=middle><I>example</I></TD>
</TR>
<TR><TD><TT>-s|--ip4-src ip</TD>
<TD>IP4 src</TD>
<TD>192.168.100.6</TD></TR>
<TR><TD><TT>-d|--ip4-dst ip</TD>
<TD>IP4 dst</TD>
<TD>5.6.7.8</TD></TR>
<TR><TD><TT>-S|--tcp-src port</TD>
<TD>TCP port src</TD>
<TD>80</TD></TR>
<TR><TD><TT>-D|--tcp-dst port</TD>
<TD>TCP port dst</TD>
<TD>80</TD></TR>
<TR><TD><TT>-n|--sample uint32</TD>
<TD>number of sample (1 to n)</TD>
<TD>1</TD></TR>
<TR><TD><TT>-f|--fragsize uint32</TD>
<TD>fragment size (0=nofrag)</TD>
<TD>0</TD></TR>
<TR><TD><TT>-x|--display|+x|--no-display</TD>
<TD>display</TD>
<TD> </TD></TR>
<TR><TD><TT>-i|--ip4opt-ips ips</TD>
<TD>IP addresses for LSRR</TD>
<TD>1.2.3.4,5.6.7.8</TD></TR>
<TR><TD><TT>-a|--spoofip spoofip</TD>
<TD>IP spoof initialization type</TD>
<TD>best </TD></TR>
</TABLE>
<P><H3>Example:</H3>
netwox 45<BR>
<BR>
</BODY>
</HTML>
|