/usr/msp430/include/msp430fe4242.h is in msp430mcu 20120406-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 | /* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430xE42x2 devices.
*
* Texas Instruments, Version 1.2
*
*
* Rev. 1.0, Initial Version
* Rev. 1.1,
* Rev. 1.2, Fixed swapped IRMS and IRMS_2 definitions
*
********************************************************************/
#ifndef __msp430xE42x2
#define __msp430xE42x2
#define __MSP430_HEADER_VERSION__ 1064
#define __MSP430_TI_HEADERS__
#ifdef __cplusplus
extern "C" {
#endif
#include <iomacros.h>
/************************************************************
* STANDARD BITS
************************************************************/
#define BIT0 (0x0001)
#define BIT1 (0x0002)
#define BIT2 (0x0004)
#define BIT3 (0x0008)
#define BIT4 (0x0010)
#define BIT5 (0x0020)
#define BIT6 (0x0040)
#define BIT7 (0x0080)
#define BIT8 (0x0100)
#define BIT9 (0x0200)
#define BITA (0x0400)
#define BITB (0x0800)
#define BITC (0x1000)
#define BITD (0x2000)
#define BITE (0x4000)
#define BITF (0x8000)
/************************************************************
* STATUS REGISTER BITS
************************************************************/
#define C (0x0001)
#define Z (0x0002)
#define N (0x0004)
#define V (0x0100)
#define GIE (0x0008)
#define CPUOFF (0x0010)
#define OSCOFF (0x0020)
#define SCG0 (0x0040)
#define SCG1 (0x0080)
/* Low Power Modes coded with Bits 4-7 in SR */
#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0 (CPUOFF)
#define LPM1 (SCG0+CPUOFF)
#define LPM2 (SCG1+CPUOFF)
#define LPM3 (SCG1+SCG0+CPUOFF)
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */
#else /* Begin #defines for C */
#define LPM0_bits (CPUOFF)
#define LPM1_bits (SCG0+CPUOFF)
#define LPM2_bits (SCG1+CPUOFF)
#define LPM3_bits (SCG1+SCG0+CPUOFF)
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
#include "in430.h"
#define LPM0 _BIS_SR(LPM0_bits) /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1 _BIS_SR(LPM1_bits) /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2 _BIS_SR(LPM2_bits) /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3 _BIS_SR(LPM3_bits) /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4 _BIS_SR(LPM4_bits) /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
#define IE1_ 0x0000 /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define U0IE IE1 /* UART0 Interrupt Enable Register */
#define WDTIE (0x01)
#define OFIE (0x02)
#define NMIIE (0x10)
#define ACCVIE (0x20)
#define URXIE0 (0x40)
#define UTXIE0 (0x80)
#define IFG1_ 0x0002 /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define U0IFG IFG1 /* UART0 Interrupt Flag Register */
#define WDTIFG (0x01)
#define OFIFG (0x02)
#define NMIIFG (0x10)
#define URXIFG0 (0x40)
#define UTXIFG0 (0x80)
#define ME1_ 0x0004 /* Module Enable 1 */
sfrb(ME1, ME1_);
#define U0ME ME1 /* UART0 Module Enable Register */
#define URXE0 (0x40)
#define UTXE0 (0x80)
#define USPIE0 (0x40)
#define IE2_ 0x0001 /* Interrupt Enable 2 */
sfrb(IE2, IE2_);
#define BTIE (0x80)
#define IFG2_ 0x0003 /* Interrupt Flag 2 */
sfrb(IFG2, IFG2_);
#define BTIFG (0x80)
/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
#define WDTCTL_ 0x0120 /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0 (0x0001)
#define WDTIS1 (0x0002)
#define WDTSSEL (0x0004)
#define WDTCNTCL (0x0008)
#define WDTTMSEL (0x0010)
#define WDTNMI (0x0020)
#define WDTNMIES (0x0040)
#define WDTHOLD (0x0080)
#define WDTPW (0x5A00)
/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE 0x01 */
/* #define WDTIFG 0x01 */
/************************************************************
* DIGITAL I/O Port1/2
************************************************************/
#define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */
#define P1IN_ 0x0020 /* Port 1 Input */
const_sfrb(P1IN, P1IN_);
#define P1OUT_ 0x0021 /* Port 1 Output */
sfrb(P1OUT, P1OUT_);
#define P1DIR_ 0x0022 /* Port 1 Direction */
sfrb(P1DIR, P1DIR_);
#define P1IFG_ 0x0023 /* Port 1 Interrupt Flag */
sfrb(P1IFG, P1IFG_);
#define P1IES_ 0x0024 /* Port 1 Interrupt Edge Select */
sfrb(P1IES, P1IES_);
#define P1IE_ 0x0025 /* Port 1 Interrupt Enable */
sfrb(P1IE, P1IE_);
#define P1SEL_ 0x0026 /* Port 1 Selection */
sfrb(P1SEL, P1SEL_);
#define P2IN_ 0x0028 /* Port 2 Input */
const_sfrb(P2IN, P2IN_);
#define P2OUT_ 0x0029 /* Port 2 Output */
sfrb(P2OUT, P2OUT_);
#define P2DIR_ 0x002A /* Port 2 Direction */
sfrb(P2DIR, P2DIR_);
#define P2IFG_ 0x002B /* Port 2 Interrupt Flag */
sfrb(P2IFG, P2IFG_);
#define P2IES_ 0x002C /* Port 2 Interrupt Edge Select */
sfrb(P2IES, P2IES_);
#define P2IE_ 0x002D /* Port 2 Interrupt Enable */
sfrb(P2IE, P2IE_);
#define P2SEL_ 0x002E /* Port 2 Selection */
sfrb(P2SEL, P2SEL_);
/************************************************************
* BASIC TIMER
************************************************************/
#define __MSP430_HAS_BT__ /* Definition to show that Module is available */
#define BTCTL_ 0x0040 /* Basic Timer Control */
sfrb(BTCTL, BTCTL_);
/* The bit names have been prefixed with "BT" */
#define BTIP0 (0x01)
#define BTIP1 (0x02)
#define BTIP2 (0x04)
#define BTFRFQ0 (0x08)
#define BTFRFQ1 (0x10)
#define BTDIV (0x20) /* fCLK2 = ACLK:256 */
#define BTHOLD (0x40) /* BT1 is held if this bit is set */
#define BTSSEL (0x80) /* fBT = fMCLK (main clock) */
#define BTCNT1_ 0x0046 /* Basic Timer Count 1 */
sfrb(BTCNT1, BTCNT1_);
#define BTCNT2_ 0x0047 /* Basic Timer Count 2 */
sfrb(BTCNT2, BTCNT2_);
/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
#define BT_fCLK2_ACLK (0x00)
#define BT_fCLK2_ACLK_DIV256 (BTDIV)
#define BT_fCLK2_MCLK (BTSSEL)
/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
#define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */
#define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */
#define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */
#define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */
#define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */
#define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */
#define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */
#define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */
/* Frequency of LCD coded with Bits 3-4 */
#define BT_fLCD_DIV32 (0x00) /* fLCD = fACLK:32 (default) */
#define BT_fLCD_DIV64 (BTFRFQ0) /* fLCD = fACLK:64 */
#define BT_fLCD_DIV128 (BTFRFQ1) /* fLCD = fACLK:128 */
#define BT_fLCD_DIV256 (BTFRFQ1+BTFRFQ0) /* fLCD = fACLK:256 */
/* LCD frequency values with fBT=fACLK */
#define BT_fLCD_1K (0x00) /* fACLK:32 (default) */
#define BT_fLCD_512 (BTFRFQ0) /* fACLK:64 */
#define BT_fLCD_256 (BTFRFQ1) /* fACLK:128 */
#define BT_fLCD_128 (BTFRFQ1+BTFRFQ0) /* fACLK:256 */
/* LCD frequency values with fBT=fMCLK */
#define BT_fLCD_31K (BTSSEL) /* fMCLK:32 */
#define BT_fLCD_15_5K (BTSSEL+BTFRFQ0) /* fMCLK:64 */
#define BT_fLCD_7_8K (BTSSEL+BTFRFQ1+BTFRFQ0) /* fMCLK:256 */
/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
/* fBT=fACLK is thought for longer interval times */
#define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */
#define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */
#define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */
#define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */
#define BT_ADLY_1 (BTIP2) /* 1ms " */
#define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */
#define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */
#define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */
#define BT_ADLY_16 (BTDIV) /* 16ms " */
#define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */
#define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */
#define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */
#define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */
#define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */
#define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */
#define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
/* the timing for short intervals is more precise than ACLK */
/* NOTE */
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
/* Too low interval time results in interrupts too frequent for the processor to handle! */
#define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */
#define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */
#define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */
#define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */
#define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */
#define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */
#define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */
#define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */
/* Reset/Hold coded with Bits 6-7 in BT(1)CTL */
/* this is for BT */
//#define BTRESET_CNT1 (BTRESET) /* BTCNT1 is reset while BTRESET is set */
//#define BTRESET_CNT1_2 (BTRESET+BTDIV) /* BTCNT1 .AND. BTCNT2 are reset while ~ is set */
/* this is for BT1 */
#define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */
#define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */
/* INTERRUPT CONTROL BITS */
/* #define BTIE 0x80 */
/* #define BTIFG 0x80 */
/************************************************************
* SYSTEM CLOCK, FLL+ (x41x)
************************************************************/
#define __MSP430_HAS_FLLPLUS_SMALL__ /* Definition to show that Module is available */
#define SCFI0_ 0x0050 /* System Clock Frequency Integrator 0 */
sfrb(SCFI0, SCFI0_);
#define FN_2 (0x04) /* fDCOCLK = 1.4-12MHz*/
#define FN_3 (0x08) /* fDCOCLK = 2.2-17Mhz*/
#define FN_4 (0x10) /* fDCOCLK = 3.2-25Mhz*/
#define FN_8 (0x20) /* fDCOCLK = 5-40Mhz*/
#define FLLD0 (0x40) /* Loop Divider Bit : 0 */
#define FLLD1 (0x80) /* Loop Divider Bit : 1 */
#define FLLD_1 (0x00) /* Multiply Selected Loop Freq. By 1 */
#define FLLD_2 (0x40) /* Multiply Selected Loop Freq. By 2 */
#define FLLD_4 (0x80) /* Multiply Selected Loop Freq. By 4 */
#define FLLD_8 (0xC0) /* Multiply Selected Loop Freq. By 8 */
#define SCFI1_ 0x0051 /* System Clock Frequency Integrator 1 */
sfrb(SCFI1, SCFI1_);
#define SCFQCTL_ 0x0052 /* System Clock Frequency Control */
sfrb(SCFQCTL, SCFQCTL_);
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
/* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */
#define SCFQ_64K (0x01) /* fMCLK=2*fACLK 1+1 to 127+1 is possible */
#define SCFQ_128K (0x03) /* fMCLK=4*fACLK */
#define SCFQ_256K (0x07) /* fMCLK=8*fACLK */
#define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */
#define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */
#define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */
#define SCFQ_4M (0x7F) /* fMCLK=128*fACLK */
#define SCFQ_M (0x80) /* Modulation Disable */
#define FLL_CTL0_ 0x0053 /* FLL+ Control 0 */
sfrb(FLL_CTL0, FLL_CTL0_);
#define DCOF (0x01) /* DCO Fault Flag */
#define LFOF (0x02) /* Low Frequency Oscillator Fault Flag */
#define XT1OF (0x04) /* High Frequency Oscillator Fault Flag */
#define OSCCAP0 (0x10) /* XIN/XOUT Cap 0 */
#define OSCCAP1 (0x20) /* XIN/XOUT Cap 1 */
#define XTS_FLL (0x40) /* 1: Selects high-freq. oscillator */
#define DCOPLUS (0x80) /* DCO+ Enable */
#define XCAP0PF (0x00) /* XIN Cap = XOUT Cap = 0pf */
#define XCAP10PF (0x10) /* XIN Cap = XOUT Cap = 10pf */
#define XCAP14PF (0x20) /* XIN Cap = XOUT Cap = 14pf */
#define XCAP18PF (0x30) /* XIN Cap = XOUT Cap = 18pf */
#define OSCCAP_0 (0x00) /* XIN Cap = XOUT Cap = 0pf */
#define OSCCAP_1 (0x10) /* XIN Cap = XOUT Cap = 10pf */
#define OSCCAP_2 (0x20) /* XIN Cap = XOUT Cap = 14pf */
#define OSCCAP_3 (0x30) /* XIN Cap = XOUT Cap = 18pf */
#define FLL_CTL1_ 0x0054 /* FLL+ Control 1 */
sfrb(FLL_CTL1, FLL_CTL1_);
#define FLL_DIV0 (0x01) /* FLL+ Divide Px.x/ACLK 0 */
#define FLL_DIV1 (0x02) /* FLL+ Divide Px.x/ACLK 1 */
#define FLL_DIV_1 (0x00) /* FLL+ Divide Px.x/ACLK By 1 */
#define FLL_DIV_2 (0x01) /* FLL+ Divide Px.x/ACLK By 2 */
#define FLL_DIV_4 (0x02) /* FLL+ Divide Px.x/ACLK By 4 */
#define FLL_DIV_8 (0x03) /* FLL+ Divide Px.x/ACLK By 8 */
/* INTERRUPT CONTROL BITS */
/* These two bits are defined in the Special Function Registers */
/* #define OFIFG 0x02 */
/* #define OFIE 0x02 */
/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
#define __MSP430_HAS_SVS__ /* Definition to show that Module is available */
#define SVSCTL_ 0x0056 /* SVS Control */
sfrb(SVSCTL, SVSCTL_);
#define SVSFG (0x01) /* SVS Flag */
#define SVSOP (0x02) /* SVS output (read only) */
#define SVSON (0x04) /* Switches the SVS on/off */
#define PORON (0x08) /* Enable POR Generation if Low Voltage */
#define VLD0 (0x10)
#define VLD1 (0x20)
#define VLD2 (0x40)
#define VLD3 (0x80)
#define VLDON (0x10)
#define VLDOFF (0x00)
#define VLD_1_8V (0x10)
/************************************************************
* LCD
************************************************************/
#define __MSP430_HAS_LCD4__ /* Definition to show that Module is available */
#define LCDCTL_ 0x0090 /* LCD Control */
sfrb(LCDCTL, LCDCTL_);
/* the names of the mode bits are different from the spec */
#define LCDON (0x01)
//#define LCDLOWR (0x02)
#define LCDSON (0x04)
#define LCDMX0 (0x08)
#define LCDMX1 (0x10)
#define LCDP0 (0x20)
#define LCDP1 (0x40)
#define LCDP2 (0x80)
/* Display modes coded with Bits 2-4 */
#define LCDSTATIC (LCDSON)
#define LCD2MUX (LCDMX0+LCDSON)
#define LCD3MUX (LCDMX1+LCDSON)
#define LCD4MUX (LCDMX1+LCDMX0+LCDSON)
/* Group select code with Bits 5-7 Seg.lines Dig.output */
#define LCDSG0 (0x00) /* --------- Port Only (default) */
#define LCDSG0_1 (LCDP0) /* S0 - S15 see Datasheet */
#define LCDSG0_2 (LCDP1) /* S0 - S19 see Datasheet */
#define LCDSG0_3 (LCDP1+LCDP0) /* S0 - S23 see Datasheet */
#define LCDSG0_4 (LCDP2) /* S0 - S27 see Datasheet */
#define LCDSG0_5 (LCDP2+LCDP0) /* S0 - S31 see Datasheet */
#define LCDSG0_6 (LCDP2+LCDP1) /* S0 - S35 see Datasheet */
#define LCDSG0_7 (LCDP2+LCDP1+LCDP0) /* S0 - S39 see Datasheet */
/* NOTE: YOU CAN ONLY USE THE 'S' OR 'G' DECLARATIONS FOR A COMMAND */
/* MOV #LCDSG0_3+LCDOG2_7,&LCDCTL ACTUALY MEANS MOV #LCDP1,&LCDCTL! */
#define LCDOG1_7 (0x00) /* --------- Port Only (default) */
#define LCDOG2_7 (LCDP0) /* S0 - S15 see Datasheet */
#define LCDOG3_7 (LCDP1) /* S0 - S19 see Datasheet */
#define LCDOG4_7 (LCDP1+LCDP0) /* S0 - S23 see Datasheet */
#define LCDOG5_7 (LCDP2) /* S0 - S27 see Datasheet */
#define LCDOG6_7 (LCDP2+LCDP0) /* S0 - S31 see Datasheet */
#define LCDOG7 (LCDP2+LCDP1) /* S0 - S35 see Datasheet */
#define LCDOGOFF (LCDP2+LCDP1+LCDP0) /* S0 - S39 see Datasheet */
#define LCDMEM_ (0x0091) /* LCD Memory */
#ifndef __STDC__
#define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */
#else
#define LCDMEM ((volatile char*) LCDMEM_) /* LCD Memory (for C) */
#endif
#define LCDM1_ 0x0091 /* LCD Memory 1 */
sfrb(LCDM1, LCDM1_);
#define LCDM2_ 0x0092 /* LCD Memory 2 */
sfrb(LCDM2, LCDM2_);
#define LCDM3_ 0x0093 /* LCD Memory 3 */
sfrb(LCDM3, LCDM3_);
#define LCDM4_ 0x0094 /* LCD Memory 4 */
sfrb(LCDM4, LCDM4_);
#define LCDM5_ 0x0095 /* LCD Memory 5 */
sfrb(LCDM5, LCDM5_);
#define LCDM6_ 0x0096 /* LCD Memory 6 */
sfrb(LCDM6, LCDM6_);
#define LCDM7_ 0x0097 /* LCD Memory 7 */
sfrb(LCDM7, LCDM7_);
#define LCDM8_ 0x0098 /* LCD Memory 8 */
sfrb(LCDM8, LCDM8_);
#define LCDM9_ 0x0099 /* LCD Memory 9 */
sfrb(LCDM9, LCDM9_);
#define LCDM10_ 0x009A /* LCD Memory 10 */
sfrb(LCDM10, LCDM10_);
#define LCDM11_ 0x009B /* LCD Memory 11 */
sfrb(LCDM11, LCDM11_);
#define LCDM12_ 0x009C /* LCD Memory 12 */
sfrb(LCDM12, LCDM12_);
#define LCDM13_ 0x009D /* LCD Memory 13 */
sfrb(LCDM13, LCDM13_);
#define LCDM14_ 0x009E /* LCD Memory 14 */
sfrb(LCDM14, LCDM14_);
#define LCDM15_ 0x009F /* LCD Memory 15 */
sfrb(LCDM15, LCDM15_);
#define LCDM16_ 0x00A0 /* LCD Memory 16 */
sfrb(LCDM16, LCDM16_);
#define LCDM17_ 0x00A1 /* LCD Memory 17 */
sfrb(LCDM17, LCDM17_);
#define LCDM18_ 0x00A2 /* LCD Memory 18 */
sfrb(LCDM18, LCDM18_);
#define LCDM19_ 0x00A3 /* LCD Memory 19 */
sfrb(LCDM19, LCDM19_);
#define LCDM20_ 0x00A4 /* LCD Memory 20 */
sfrb(LCDM20, LCDM20_);
#define LCDMA (LCDM10) /* LCD Memory A */
#define LCDMB (LCDM11) /* LCD Memory B */
#define LCDMC (LCDM12) /* LCD Memory C */
#define LCDMD (LCDM13) /* LCD Memory D */
#define LCDME (LCDM14) /* LCD Memory E */
#define LCDMF (LCDM15) /* LCD Memory F */
/************************************************************
* USART
************************************************************/
/* UxCTL */
#define PENA (0x80) /* Parity enable */
#define PEV (0x40) /* Parity 0:odd / 1:even */
#define SPB (0x20) /* Stop Bits 0:one / 1: two */
#define CHAR (0x10) /* Data 0:7-bits / 1:8-bits */
#define LISTEN (0x08) /* Listen mode */
#define SYNC (0x04) /* UART / SPI mode */
#define MM (0x02) /* Master Mode off/on */
#define SWRST (0x01) /* USART Software Reset */
/* UxTCTL */
#define CKPH (0x80) /* SPI: Clock Phase */
#define CKPL (0x40) /* Clock Polarity */
#define SSEL1 (0x20) /* Clock Source Select 1 */
#define SSEL0 (0x10) /* Clock Source Select 0 */
#define URXSE (0x08) /* Receive Start edge select */
#define TXWAKE (0x04) /* TX Wake up mode */
#define STC (0x02) /* SPI: STC enable 0:on / 1:off */
#define TXEPT (0x01) /* TX Buffer empty */
/* UxRCTL */
#define FE (0x80) /* Frame Error */
#define PE (0x40) /* Parity Error */
#define OE (0x20) /* Overrun Error */
#define BRK (0x10) /* Break detected */
#define URXEIE (0x08) /* RX Error interrupt enable */
#define URXWIE (0x04) /* RX Wake up interrupt enable */
#define RXWAKE (0x02) /* RX Wake up detect */
#define RXERR (0x01) /* RX Error Error */
/************************************************************
* USART 0
************************************************************/
#define __MSP430_HAS_UART0__ /* Definition to show that Module is available */
#define U0CTL_ 0x0070 /* USART 0 Control */
sfrb(U0CTL, U0CTL_);
#define U0TCTL_ 0x0071 /* USART 0 Transmit Control */
sfrb(U0TCTL, U0TCTL_);
#define U0RCTL_ 0x0072 /* USART 0 Receive Control */
sfrb(U0RCTL, U0RCTL_);
#define U0MCTL_ 0x0073 /* USART 0 Modulation Control */
sfrb(U0MCTL, U0MCTL_);
#define U0BR0_ 0x0074 /* USART 0 Baud Rate 0 */
sfrb(U0BR0, U0BR0_);
#define U0BR1_ 0x0075 /* USART 0 Baud Rate 1 */
sfrb(U0BR1, U0BR1_);
#define U0RXBUF_ 0x0076 /* USART 0 Receive Buffer */
const_sfrb(U0RXBUF, U0RXBUF_);
#define U0TXBUF_ 0x0077 /* USART 0 Transmit Buffer */
sfrb(U0TXBUF, U0TXBUF_);
/* Alternate register names */
#define UCTL0 U0CTL /* USART 0 Control */
#define UTCTL0 U0TCTL /* USART 0 Transmit Control */
#define URCTL0 U0RCTL /* USART 0 Receive Control */
#define UMCTL0 U0MCTL /* USART 0 Modulation Control */
#define UBR00 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR10 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL0_ U0CTL_ /* USART 0 Control */
#define UTCTL0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR00_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR10_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF0_ U0TXBUF_ /* USART 0 Transmit Buffer */
#define UCTL_0 U0CTL /* USART 0 Control */
#define UTCTL_0 U0TCTL /* USART 0 Transmit Control */
#define URCTL_0 U0RCTL /* USART 0 Receive Control */
#define UMCTL_0 U0MCTL /* USART 0 Modulation Control */
#define UBR0_0 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR1_0 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF_0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF_0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL_0_ U0CTL_ /* USART 0 Control */
#define UTCTL_0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL_0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL_0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR0_0_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR1_0_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF_0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF_0_ U0TXBUF_ /* USART 0 Transmit Buffer */
/************************************************************
* Timer A3
************************************************************/
#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */
#define TAIV_ 0x012E /* Timer A Interrupt Vector Word */
const_sfrw(TAIV, TAIV_);
#define TACTL_ 0x0160 /* Timer A Control */
sfrw(TACTL, TACTL_);
#define TACCTL0_ 0x0162 /* Timer A Capture/Compare Control 0 */
sfrw(TACCTL0, TACCTL0_);
#define TACCTL1_ 0x0164 /* Timer A Capture/Compare Control 1 */
sfrw(TACCTL1, TACCTL1_);
#define TACCTL2_ 0x0166 /* Timer A Capture/Compare Control 2 */
sfrw(TACCTL2, TACCTL2_);
#define TAR_ 0x0170 /* Timer A Counter Register */
sfrw(TAR, TAR_);
#define TACCR0_ 0x0172 /* Timer A Capture/Compare 0 */
sfrw(TACCR0, TACCR0_);
#define TACCR1_ 0x0174 /* Timer A Capture/Compare 1 */
sfrw(TACCR1, TACCR1_);
#define TACCR2_ 0x0176 /* Timer A Capture/Compare 2 */
sfrw(TACCR2, TACCR2_);
/* Alternate register names */
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
/* Alternate register names - 5xx style */
#define TA0IV TAIV /* Timer A Interrupt Vector Word */
#define TA0CTL TACTL /* Timer A Control */
#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define TA0R TAR /* Timer A Counter Register */
#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */
#define TA0CTL_ TACTL_ /* Timer A Control */
#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define TA0R_ TAR_ /* Timer A Counter Register */
#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
#define TIMER0_A1_VECTOR TIMERA1_VECTOR /* Int. Vector: Timer A CC1-2, TA */
#define TIMER0_A0_VECTOR TIMERA0_VECTOR /* Int. Vector: Timer A CC0 */
#define TASSEL1 (0x0200) /* Timer A clock source select 1 */
#define TASSEL0 (0x0100) /* Timer A clock source select 0 */
#define ID1 (0x0080) /* Timer A clock input divider 1 */
#define ID0 (0x0040) /* Timer A clock input divider 0 */
#define MC1 (0x0020) /* Timer A mode control 1 */
#define MC0 (0x0010) /* Timer A mode control 0 */
#define TACLR (0x0004) /* Timer A counter clear */
#define TAIE (0x0002) /* Timer A counter interrupt enable */
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
#define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */
#define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2 (0x0020) /* Timer A mode control: 2 - Continous up */
#define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */
#define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */
#define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */
#define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */
#define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */
#define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */
#define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */
#define CM1 (0x8000) /* Capture mode 1 */
#define CM0 (0x4000) /* Capture mode 0 */
#define CCIS1 (0x2000) /* Capture input select 1 */
#define CCIS0 (0x1000) /* Capture input select 0 */
#define SCS (0x0800) /* Capture sychronize */
#define SCCI (0x0400) /* Latched capture signal (read) */
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2 (0x0080) /* Output mode 2 */
#define OUTMOD1 (0x0040) /* Output mode 1 */
#define OUTMOD0 (0x0020) /* Output mode 0 */
#define CCIE (0x0010) /* Capture/compare interrupt enable */
#define CCI (0x0008) /* Capture input signal (read) */
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
#define COV (0x0002) /* Capture/compare overflow flag */
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
#define OUTMOD_0 (0x0000) /* PWM output mode: 0 - output only */
#define OUTMOD_1 (0x0020) /* PWM output mode: 1 - set */
#define OUTMOD_2 (0x0040) /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3 (0x0060) /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4 (0x0080) /* PWM output mode: 4 - toggle */
#define OUTMOD_5 (0x00A0) /* PWM output mode: 5 - Reset */
#define OUTMOD_6 (0x00C0) /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7 (0x00E0) /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0 (0x0000) /* Capture input select: 0 - CCIxA */
#define CCIS_1 (0x1000) /* Capture input select: 1 - CCIxB */
#define CCIS_2 (0x2000) /* Capture input select: 2 - GND */
#define CCIS_3 (0x3000) /* Capture input select: 3 - Vcc */
#define CM_0 (0x0000) /* Capture mode: 0 - disabled */
#define CM_1 (0x4000) /* Capture mode: 1 - pos. edge */
#define CM_2 (0x8000) /* Capture mode: 1 - neg. edge */
#define CM_3 (0xC000) /* Capture mode: 1 - both edges */
/* TA3IV Definitions */
#define TAIV_NONE (0x0000) /* No Interrupt pending */
#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */
#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */
#define TAIV_6 (0x0006) /* Reserved */
#define TAIV_8 (0x0008) /* Reserved */
#define TAIV_TAIFG (0x000A) /* TAIFG */
/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH__ /* Definition to show that Module is available */
#define FCTL1_ 0x0128 /* FLASH Control 1 */
sfrw(FCTL1, FCTL1_);
#define FCTL2_ 0x012A /* FLASH Control 2 */
sfrw(FCTL2, FCTL2_);
#define FCTL3_ 0x012C /* FLASH Control 3 */
sfrw(FCTL3, FCTL3_);
#define FRKEY (0x9600) /* Flash key returned by read */
#define FWKEY (0xA500) /* Flash key for write */
#define FXKEY (0x3300) /* for use with XOR instruction */
#define ERASE (0x0002) /* Enable bit for Flash segment erase */
#define MERAS (0x0004) /* Enable bit for Flash mass erase */
#define WRT (0x0040) /* Enable bit for Flash write */
#define BLKWRT (0x0080) /* Enable bit for Flash segment write */
#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */
#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2 (0x0004)
#endif
#ifndef FN3
#define FN3 (0x0008)
#endif
#ifndef FN4
#define FN4 (0x0010)
#endif
#define FN5 (0x0020)
#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */
#define FSSEL1 (0x0080) /* Flash clock select 1 */
#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */
#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */
#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */
#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */
#define BUSY (0x0001) /* Flash busy: 1 */
#define KEYV (0x0002) /* Flash Key violation flag */
#define ACCVIFG (0x0004) /* Flash Access violation flag */
#define WAIT (0x0008) /* Wait flag for segment write */
#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX (0x0020) /* Flash Emergency Exit */
/************************************************************
* HARDWARE MULTIPLIER
************************************************************/
#define __MSP430_HAS_MPY__ /* Definition to show that Module is available */
#define MPY_ 0x0130 /* Multiply Unsigned/Operand 1 */
sfrw(MPY, MPY_);
#define MPYS_ 0x0132 /* Multiply Signed/Operand 1 */
sfrw(MPYS, MPYS_);
#define MAC_ 0x0134 /* Multiply Unsigned and Accumulate/Operand 1 */
sfrw(MAC, MAC_);
#define MACS_ 0x0136 /* Multiply Signed and Accumulate/Operand 1 */
sfrw(MACS, MACS_);
#define OP2_ 0x0138 /* Operand 2 */
sfrw(OP2, OP2_);
#define RESLO_ 0x013A /* Result Low Word */
sfrw(RESLO, RESLO_);
#define RESHI_ 0x013C /* Result High Word */
sfrw(RESHI, RESHI_);
#define SUMEXT_ 0x013E /* Sum Extend */
const_sfrw(SUMEXT, SUMEXT_);
/************************************************************
* SD16 - Sigma Delta 16 Bit
************************************************************/
#define __MSP430_HAS_SD16_2__ /* Definition to show that Module is available */
#define SD16INCTL0_ 0x00B0 /* SD16 Input Control Register Channel 0 */
sfrb(SD16INCTL0, SD16INCTL0_);
#define SD16INCTL1_ 0x00B1 /* SD16 Input Control Register Channel 1 */
sfrb(SD16INCTL1, SD16INCTL1_);
#define SD16PRE0_ 0x00B8 /* SD16 Preload Register Channel 0 */
sfrb(SD16PRE0, SD16PRE0_);
#define SD16PRE1_ 0x00B9 /* SD16 Preload Register Channel 1 */
sfrb(SD16PRE1, SD16PRE1_);
#define SD16CONF0_ 0x00B7 /* SD16 Internal Configuration Register 0 */
sfrb(SD16CONF0, SD16CONF0_);
#define SD16CONF1_ 0x00BF /* SD16 Internal Configuration Register 1 */
sfrb(SD16CONF1, SD16CONF1_);
/* Please use only the recommended settings */
#define SD16CTL_ 0x0100 /* Sigma Delta ADC 16 Control Register */
sfrw(SD16CTL, SD16CTL_);
#define SD16CCTL0_ 0x0102 /* SD16 Channel 0 Control Register */
sfrw(SD16CCTL0, SD16CCTL0_);
#define SD16CCTL1_ 0x0104 /* SD16 Channel 1 Control Register */
sfrw(SD16CCTL1, SD16CCTL1_);
#define SD16IV_ 0x0110 /* SD16 Interrupt Vector Register */
sfrw(SD16IV, SD16IV_);
#define SD16MEM0_ 0x0112 /* SD16 Channel 0 Conversion Memory */
sfrw(SD16MEM0, SD16MEM0_);
#define SD16MEM1_ 0x0114 /* SD16 Channel 1 Conversion Memory */
sfrw(SD16MEM1, SD16MEM1_);
/* SD16INCTLx - AFEINCTLx */
#define SD16INCH0 (0x0001) /* SD16 Input Channel select 0 */
#define SD16INCH1 (0x0002) /* SD16 Input Channel select 1 */
#define SD16INCH2 (0x0004) /* SD16 Input Channel select 2 */
#define SD16GAIN0 (0x0008) /* SD16 Input Pre-Amplifier Gain Select 0 */
#define SD16GAIN1 (0x0010) /* SD16 Input Pre-Amplifier Gain Select 1 */
#define SD16GAIN2 (0x0020) /* SD16 Input Pre-Amplifier Gain Select 2 */
#define SD16INTDLY0 (0x0040) /* SD16 Interrupt Delay after 1.Conversion 0 */
#define SD16INTDLY1 (0x0080) /* SD16 Interrupt Delay after 1.Conversion 1 */
#define SD16GAIN_1 (0x0000) /* SD16 Input Pre-Amplifier Gain Select *1 */
#define SD16GAIN_2 (0x0008) /* SD16 Input Pre-Amplifier Gain Select *2 */
#define SD16GAIN_4 (0x0010) /* SD16 Input Pre-Amplifier Gain Select *4 */
#define SD16GAIN_8 (0x0018) /* SD16 Input Pre-Amplifier Gain Select *8 */
#define SD16GAIN_16 (0x0020) /* SD16 Input Pre-Amplifier Gain Select *16 */
#define SD16GAIN_32 (0x0028) /* SD16 Input Pre-Amplifier Gain Select *32 */
#define SD16INCH_0 (0x0000) /* SD16 Input Channel select input */
#define SD16INCH_1 (0x0001) /* SD16 Input Channel select input */
#define SD16INCH_2 (0x0002) /* SD16 Input Channel select input */
#define SD16INCH_3 (0x0003) /* SD16 Input Channel select input */
#define SD16INCH_4 (0x0004) /* SD16 Input Channel select input */
#define SD16INCH_5 (0x0005) /* SD16 Input Channel select input */
#define SD16INCH_6 (0x0006) /* SD16 Input Channel select Temp */
#define SD16INCH_7 (0x0007) /* SD16 Input Channel select Offset */
#define SD16INTDLY_0 (0x0000) /* SD16 Interrupt Delay: Int. after 4.Conversion */
#define SD16INTDLY_1 (0x0040) /* SD16 Interrupt Delay: Int. after 3.Conversion */
#define SD16INTDLY_2 (0x0080) /* SD16 Interrupt Delay: Int. after 2.Conversion */
#define SD16INTDLY_3 (0x00C0) /* SD16 Interrupt Delay: Int. after 1.Conversion */
/* SD16CTL - AFECTL */
#define SD16OVIE (0x0002) /* SD16 Overflow Interupt Enable */
#define SD16REFON (0x0004) /* SD16 Switch internal Reference on */
#define SD16VMIDON (0x0008) /* SD16 Switch Vmid Buffer on */
#define SD16SSEL0 (0x0010) /* SD16 Clock Source Select 0 */
#define SD16SSEL1 (0x0020) /* SD16 Clock Source Select 1 */
#define SD16DIV0 (0x0040) /* SD16 Clock Divider Select 0 */
#define SD16DIV1 (0x0080) /* SD16 Clock Divider Select 1 */
#define SD16LP (0x0100) /* SD16 Low Power Mode Enable */
#define SD16DIV_0 (0x0000) /* SD16 Clock Divider Select /1 */
#define SD16DIV_1 (SD16DIV0) /* SD16 Clock Divider Select /2 */
#define SD16DIV_2 (SD16DIV1) /* SD16 Clock Divider Select /4 */
#define SD16DIV_3 (SD16DIV0+SD16DIV1) /* SD16 Clock Divider Select /8 */
#define SD16SSEL_0 (0x0000) /* SD16 Clock Source Select MCLK */
#define SD16SSEL_1 (SD16SSEL0) /* SD16 Clock Source Select SMCLK */
#define SD16SSEL_2 (SD16SSEL1) /* SD16 Clock Source Select ACLK */
#define SD16SSEL_3 (SD16SSEL0+SD16SSEL1) /* SD16 Clock Source Select TACLK */
/* SD16CCTLx - AFECCTLx */
#define SD16GRP (0x0001) /* SD16 Grouping of Channels: 0:Off/1:On */
#define SD16SC (0x0002) /* SD16 Start Conversion */
#define SD16IFG (0x0004) /* SD16 Channel x Interrupt Flag */
#define SD16IE (0x0008) /* SD16 Channel x Interrupt Enable */
#define SD16DF (0x0010) /* SD16 Channel x Data Format: 0:Unipolar/1:Bipolar */
#define SD16OVIFG (0x0020) /* SD16 Channel x Overflow Interrupt Flag */
#define SD16LSBACC (0x0040) /* SD16 Channel x Access LSB of ADC */
#define SD16LSBTOG (0x0080) /* SD16 Channel x Toggle LSB Output of ADC */
#define SD16OSR0 (0x0100) /* SD16 Channel x OverSampling Ratio 0 */
#define SD16OSR1 (0x0200) /* SD16 Channel x OverSampling Ratio 1 */
#define SD16SNGL (0x0400) /* SD16 Channel x Single Conversion On/Off */
#define SD16OSR_256 (0x0000) /* SD16 Channel x OverSampling Ratio 256 */
#define SD16OSR_128 (0x0100) /* SD16 Channel x OverSampling Ratio 128 */
#define SD16OSR_64 (0x0200) /* SD16 Channel x OverSampling Ratio 64 */
#define SD16OSR_32 (0x0300) /* SD16 Channel x OverSampling Ratio 32 */
/* SD16IV Definitions */
#define SD16IV_NONE (0x0000) /* No Interrupt pending */
#define SD16IV_SD16OVIFG (0x0002) /* SD16OVIFG */
#define SD16IV_SD16MEM0 (0x0004) /* SD16MEM0 SD16IFG */
#define SD16IV_SD16MEM1 (0x0006) /* SD16MEM1 SD16IFG */
/************************************************************
* ESP430E
************************************************************/
#define __MSP430_HAS_ESP430E__ /* Definition to show that Module is available */
#define AFEINCTL0 SD16INCTL0 /* AFE Input Control Register Channel 0 */
#define AFEINCTL1 SD16INCTL1 /* AFE Input Control Register Channel 1 */
#define AFECTL SD16CTL /* Analog Front End Control Register */
#define AFECCTL0 SD16CCTL0 /* AFE Channel 0 Control Register */
#define AFECCTL1 SD16CCTL1 /* AFE Channel 1 Control Register */
#define ESPCTL_ 0x0150 /* ESP430 Control Register */
sfrw(ESPCTL, ESPCTL_);
#define MBCTL_ 0x0152 /* Mailbox Control Register */
sfrw(MBCTL, MBCTL_);
#define MBIN0_ 0x0154 /* Incoming Mailbox 0 Register */
sfrw(MBIN0, MBIN0_);
#define MBIN1_ 0x0156 /* Incoming Mailbox 1 Register */
sfrw(MBIN1, MBIN1_);
#define MBOUT0_ 0x0158 /* Outgoing Mailbox 0 Register */
sfrw(MBOUT0, MBOUT0_);
#define MBOUT1_ 0x015A /* Outgoing Mailbox 1 Register */
sfrw(MBOUT1, MBOUT1_);
#define ESP430_STAT0_ 0x01C0 /* ESP430 Return Value 0 */
const_sfrw(ESP430_STAT0, ESP430_STAT0_);
#define ESP430_STAT1_ 0x01C2 /* ESP430 Return Value 1 */
const_sfrw(ESP430_STAT1, ESP430_STAT1_);
#define WAVEFSV1_ 0x01C4 /* ESP430 Return Value 2 */
const_sfrw(WAVEFSV1, WAVEFSV1_);
#define RET3_ 0x01C6 /* ESP430 Return Value 3 */
const_sfrw(RET3, RET3_);
#define RET4_ 0x01C8 /* ESP430 Return Value 4 */
const_sfrw(RET4, RET4_);
#define WAVEFSI1_ 0x01CA /* ESP430 Return Value 5 */
const_sfrw(WAVEFSI1, WAVEFSI1_);
#define RET7_ 0x01CE /* ESP430 Return Value 7 */
const_sfrw(RET7, RET7_);
#define ACTENERGY1_LO_ 0x01D0 /* ESP430 Return Value 8 */
const_sfrw(ACTENERGY1_LO, ACTENERGY1_LO_);
#define ACTENERGY1_HI_ 0x01D2 /* ESP430 Return Value 9 */
const_sfrw(ACTENERGY1_HI, ACTENERGY1_HI_);
#define REACTENERGY_LO_ 0x01D8 /* ESP430 Return Value 12 */
const_sfrw(REACTENERGY_LO, REACTENERGY_LO_);
#define REACTENERGY_HI_ 0x01DA /* ESP430 Return Value 13 */
const_sfrw(REACTENERGY_HI, REACTENERGY_HI_);
#define APPENERGY_LO_ 0x01DC /* ESP430 Return Value 14 */
const_sfrw(APPENERGY_LO, APPENERGY_LO_);
#define APPENERGY_HI_ 0x01DE /* ESP430 Return Value 15 */
const_sfrw(APPENERGY_HI, APPENERGY_HI_);
#define ACTENSPER1_LO_ 0x01E0 /* ESP430 Return Value 16 */
const_sfrw(ACTENSPER1_LO, ACTENSPER1_LO_);
#define ACTENSPER1_HI_ 0x01E2 /* ESP430 Return Value 17 */
const_sfrw(ACTENSPER1_HI, ACTENSPER1_HI_);
#define IRMS_2_HI_ 0x01E4 /* ESP430 Return Value 18 */
const_sfrw(IRMS_2_HI, IRMS_2_HI_);
#define IRMS_2_LO_ 0x01E6 /* ESP430 Return Value 19 */
const_sfrw(IRMS_2_LO, IRMS_2_LO_);
#define POWERFCT_ 0x01E8 /* ESP430 Return Value 20 */
const_sfrw(POWERFCT, POWERFCT_);
//const sfrw RESERVED (0x01EA) /* ESP430 Return Value 21 */
#define MAINSPERIOD_ 0x01EC /* ESP430 Return Value 22 */
const_sfrw(MAINSPERIOD, MAINSPERIOD_);
#define V1RMS_ 0x01EE /* ESP430 Return Value 23 */
const_sfrw(V1RMS, V1RMS_);
#define IRMS_LO_ 0x01F0 /* ESP430 Return Value 24 */
const_sfrw(IRMS_LO, IRMS_LO_);
#define IRMS_HI_ 0x01F2 /* ESP430 Return Value 25 */
const_sfrw(IRMS_HI, IRMS_HI_);
#define VPEAK_ 0x01F4 /* ESP430 Return Value 26 */
const_sfrw(VPEAK, VPEAK_);
#define IPEAK_ 0x01F6 /* ESP430 Return Value 27 */
const_sfrw(IPEAK, IPEAK_);
#define LINECYCLCNT_LO_ 0x01F8 /* ESP430 Return Value 28 */
const_sfrw(LINECYCLCNT_LO, LINECYCLCNT_LO_);
#define LINECYCLCNT_HI_ 0x01FA /* ESP430 Return Value 29 */
const_sfrw(LINECYCLCNT_HI, LINECYCLCNT_HI_);
#define NMBMEAS_LO_ 0x01FC /* ESP430 Return Value 30 */
const_sfrw(NMBMEAS_LO, NMBMEAS_LO_);
#define NMBMEAS_HI_ 0x01FE /* ESP430 Return Value 31 */
const_sfrw(NMBMEAS_HI, NMBMEAS_HI_);
#define RET0 ESP430_STAT0 /* STATUS0 of ESP430 */
#define RET1 ESP430_STAT1 /* STATUS1 of ESP430 */
#define RET2 WAVEFSV1 /* Waveform Sample V1 offset corrected*/
#define RET5 WAVEFSI1 /* Waveform Sample I1 offset corrected*/
//#define RET6 RESERVED /* Reserved */
#define RET8 ACTENERGY1_LO /* Active energy I1 Low Word */
#define RET9 ACTENERGY1_HI /* Active energy I1 High Word */
//#define RET10 RESERVED /* Reserved */
//#define RET11 RESERVED /* Reserved */
#define RET12 REACTENERGY_LO /* Reactive energy Low Word */
#define RET13 REACTENERGY_HI /* Reactive energy High Word */
#define RET14 APPENERGY_LO /* Apparent energy Low Word */
#define RET15 APPENERGY_HI /* Apparent energy High Word */
#define RET16 ACTENSPER1_LO /* Active energy I1 for last mains period Low Word */
#define RET17 ACTENSPER1_HI /* Active energy I1 for last mains period High Word */
#define RET18 IRMS_2_HI /* Current RMS value last second I1 High Word */
#define RET19 IRMS_2_LO /* Current RMS value last second I1 Low Word */
#define RET20 POWERFCT /* Power factor */
//#define RET21 RESERVED /* Reserved */
#define RET22 MAINSPERIOD /* Mains period */
#define RET23 V1RMS /* Voltage RMS V1 value last second */
#define RET24 IRMS_LO /* Current RMS value last second I1 Low Word */
#define RET25 IRMS_HI /* Current RMS value last second I1 High Word */
#define RET26 VPEAK /* Voltage V1 absolute peak value */
#define RET27 IPEAK /* Current absolute peak value I1 */
#define RET28 LINECYCLCNT_LO /* Line cycle counter Low Word */
#define RET29 LINECYCLCNT_HI /* Line cycle counter High Word */
#define RET30 NMBMEAS_LO /* Number of Measurements for CPU signal Low Word */
#define RET31 NMBMEAS_HI /* Number of Measurements for CPU signal High Word */
/* ESPCTL */
#define ESPEN (0x0001) /* ESP430 Module enable */
#define ESPSUSP (0x0002) /* ESP430 Module suspend */
#define IREQ (0x0004) /* NOT supported by current ESP430 Software */
/* RET0 - Status0 Flags */
#define WFSRDYFG (0x0001) /* New waveform Samples ready Flag */
//#define RESERVED (0x0002) /* Reserved */
#define ILREACHEDFG (0x0004) /* Interrupt level reached Flag */
#define ENRDYFG (0x0008) /* New Energy values ready Flag */
#define ZXLDFG (0x0010) /* Zero Crossing of V1 Flag (leading edge) */
#define ZXTRFG (0x0020) /* Zero Crossing of V1 Flag (trailing edge) */
#define CALRDYFG (0x0040) /* Calibration values ready Flag */
#define TAMPFG (0x0080) /* Tampering Occured Flag */
#define NEGENFG (0x0100) /* Negativ Energy Flag */
#define VDROPFG (0x0200) /* Voltage drop occured Flag */
#define VPEAKFG (0x0400) /* Voltage exceed VPeak level Flag */
#define I1PEAKFG (0x0800) /* Current exceed I1Peak level Flag */
//#define RESERVED (0x1000) /* Reserved */
//#define RESERVED (0x2000) /* Reserved */
//#define RESERVED (0x4000) /* Reserved */
#define ACTIVEFG (0x8000) /* Measurement or Calibration running Flag */
/* RET1 - Status1 Flags */
#define ILNEGFG (0x0004) /* Negative Interrupt level reached Flag */
#define VPEAKNEGFG (0x0400) /* Negative Voltage exceed VPeak level Flag */
#define I1PEAKNEGFG (0x0800) /* Negative Current exceed I1Peak level Flag */
/* MBCTL */
#define IN0IFG (0x0001) /* Incoming Mail 0 Interrupt Flag */
#define IN1IFG (0x0002) /* Incoming Mail 1 Interrupt Flag */
#define OUT0FG (0x0004) /* Outgoing Mail 0 Flag */
#define OUT1FG (0x0008) /* Outgoing Mail 1 Flag */
#define IN0IE (0x0010) /* Incoming Mail 0 Interrupt Enable */
#define IN1IE (0x0020) /* Incoming Mail 1 Interrupt Enable */
#define CLR0OFF (0x0040) /* Switch off automatic clear of IN0IFG */
#define CLR1OFF (0x0080) /* Switch off automatic clear of IN1IFG */
#define OUT0IFG (0x0100) /* Outgoing Mail 0 Interrupt Flag */
#define OUT1IFG (0x0200) /* Outgoing Mail 1 Interrupt Flag */
#define OUT0IE (0x0400) /* Outgoing Mail 0 Interrupt Enable */
#define OUT1IE (0x0800) /* Outgoing Mail 1 Interrupt Enable */
/* Messages to ESP */
#define mRESET (0x0001) /* Restart ESP430 Software */
#define mSET_MODE (0x0003) /* Set Operation Mode for ESP430 Software */
#define mCLR_EVENT (0x0005) /* Clear Flags for ESP430 Software */
#define mINIT (0x0007) /* Initialize ESP430 Software */
#define mTEMP (0x0009) /* Request Temp. Measurement from ESP430 Software */
#define mSWVERSION (0x000B) /* Request software version of ESP430 */
#define mREAD_PARAM (0x000D) /* Request to read the parameter with no. �Parameter No.� */
#define mSET_CTRL0 (0x0200) /* Set Control Register 0 */
#define mSET_CTRL1 (0x0202) /* Set Control Register 1 */
#define mSET_EVENT (0x0204) /* Set which Evenets should cause an message */
#define mSET_PHASECORR1 (0x0206) /* Set Phase Correction fo I1 */
#define mSET_V1OFFSET (0x020A) /* Set Offset for V1 */
#define mSET_I1OFFSET (0x020C) /* Set Offset for I1 */
#define mSET_ADAPTI1 (0x0210) /* Set Adaption factor for I1 */
#define mSET_GAINCORR1 (0x0214) /* Set Gain Correction for Power P1 */
#define mSET_POFFSET1_LO (0x0216) /* Set Power Offset for Power P1 */
#define mSET_POFFSET1_HI (0x0218) /* Set Power Offset for Power P1 */
#define mSET_INTRPTLEVL_LO (0x0220) /* Set Interrupt Level */
#define mSET_INTRPTLEVL_HI (0x0222) /* Set Interrupt Level */
#define mSET_CALCYCLCNT (0x0224) /* Set number of main cycles for calibration */
#define mSET_STARTCURR_FRAC (0x0226) /* Set start current fractional Part*/
#define mSET_STARTCURR_INT (0x0228) /* Set start current integer Part*/
#define mSET_NOMFREQ (0x022A) /* Set nominal main frequency */
#define mSET_VDROPCYCLS (0x022C) /* Set cylces for VDrop detection */
#define mSET_RATIOTAMP (0x022E) /* Set ratio for tamper detection */
#define mSET_ITAMP (0x0230) /* Set minimum current for tamper detection */
#define mSET_VDROPLEVEL (0x0232) /* Set level for VDrop detection */
#define mSET_VPEAKLEVEL (0x0234) /* Set level for VPeak detection */
#define mSET_IPEAKLEVEL (0x0236) /* Set level for IPeak detection */
#define mSET_DCREMPER (0x0238) /* Set number of periods for DC-removal */
#define mSET_DELTAV1MAX (0x023A) /* Set max. change of V1 if V1FILTER =1 */
#define mSET_CORRCOMP (0x023C) /* Set Common Mode Rejection ratio */
#define mSET_FADCU (0x023E) /* Set ADC sampling frequency fADC */
/* Flags for mSET_CTRL0 */
#define CURR_I1 (0x0002) /* 0: Current transformer, dc-tol CT or shunt */
/* 1: Rogowski coil (not yet implemented) */
#define MB (0x0004) /* Intrpt to CPU: 0: energy level 1: #measurements */
#define NE0 (0x0008) /* Neg. energy treatment: 00: clear neg. energy */
#define NE1 (0x0010) /* 01: use absolute energy 10: use energy as it is */
#define DCREM_V1 (0x0020) /* DC removal for V1: 0: off 1: on */
#define DCREM_I1 (0x0040) /* DC removal for I1: 0: off 1: on */
#define V1FILTER (0x0100) /* Enable on V1 Spike Filter: 0: off 1: on */
/* Messages from ESP */
#define mEVENT (0x0001) /* Event Status Flag for ESP430 Software */
#define mTEMPRDY (0x0003) /* Temperature measurement completed and in MBIN1 */
#define mSWRDY (0x0005) /* Software version in MBIN1 */
#define mPARAMRDY (0x0007) /* Parameter requested by mREAD_PARAM returned in MBIN1 */
#define mPARAMSET (0x0009) /* Parameter has been set */
/* EVENT: Event Message Enable Bits */
#define WFSRDYME (0x0001) /* New waveform Samples ready */
#define ILREACHEDME (0x0004) /* Interrupt level reached */
#define ENRDYME (0x0008) /* New Energy values ready */
#define ZXLDME (0x0010) /* Zero Crossing of V1 (leading edge) */
#define ZXTRME (0x0020) /* Zero Crossing of V1 (trailing edge) */
#define CALRDYME (0x0040) /* Calibration values ready */
#define TAMPME (0x0080) /* Tampering Occured */
#define NEGENME (0x0100) /* Negativ Energy */
#define VDROPME (0x0200) /* Voltage drop occured */
#define VPEAKME (0x0400) /* Voltage exceed VPeak level */
#define I1PEAKME (0x0800) /* Current exceed I1Peak level */
//#define RESERVED (0x1000) /* Reserved */
//#define RESERVED (0x2000) /* Reserved */
//#define RESERVED (0x4000) /* Reserved */
#define ACTIVEME (0x8000) /* Measurement of Calibration running */
/* ESP Modes */
#define modeIDLE (0x0000) /* Set Mode: Idle Mode */
#define modeCALIBRATION (0x0002) /* Set Mode: Calibration Mode */
#define modeMEASURE (0x0004) /* Set Mode: Measure Mode */
#define modeRESET (0x0006) /* Set Mode: Reset and Restart the ESP430 module */
#define modeINIT (0x0008) /* Set Mode: Initialize ESP430 module */
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
#define BASICTIMER_VECTOR (0x0000) /* 0xFFE0 Basic Timer */
#define PORT2_VECTOR (0x0002) /* 0xFFE2 Port 2 */
#define PORT1_VECTOR (0x0008) /* 0xFFE8 Port 1 */
#define TIMERA1_VECTOR (0x000A) /* 0xFFEA Timer A CC1-2, TA */
#define TIMERA0_VECTOR (0x000C) /* 0xFFEC Timer A CC0 */
#define USART0TX_VECTOR (0x0010) /* 0xFFF0 USART 0 Transmit */
#define USART0RX_VECTOR (0x0012) /* 0xFFF2 USART 0 Receive */
#define WDT_VECTOR (0x0014) /* 0xFFF4 Watchdog Timer */
#define SD16_VECTOR (0x0018) /* 0xFFF8 Sigma Delta ADC */
#define ESP430_VECTOR (0x001A) /* 0xFFFA ESP430 Mailbox */
#define NMI_VECTOR (0x001C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR (0x001E) /* 0xFFFE Reset [Highest Priority] */
#define UART0TX_VECTOR USART0TX_VECTOR
#define UART0RX_VECTOR USART0RX_VECTOR
/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif /* #ifndef __msp430xE42x2 */
|