/usr/msp430/include/msp430afe221.h is in msp430mcu 20120406-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 | /* ============================================================================ */
/* Copyright (c) 2012, Texas Instruments Incorporated */
/* All rights reserved. */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* * Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* */
/* * Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in the */
/* documentation and/or other materials provided with the distribution. */
/* */
/* * Neither the name of Texas Instruments Incorporated nor the names of */
/* its contributors may be used to endorse or promote products derived */
/* from this software without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */
/* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */
/* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */
/* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */
/* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */
/* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */
/* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */
/* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */
/* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */
/* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
/* ============================================================================ */
/********************************************************************
*
* Standard register and bit definitions for the Texas Instruments
* MSP430 microcontroller.
*
* This file supports assembler and C development for
* MSP430AFE221 devices.
*
* Texas Instruments, Version 1.0
*
* Rev. 1.0, Setup
*
********************************************************************/
#ifndef __MSP430AFE221
#define __MSP430AFE221
#define __MSP430_HEADER_VERSION__ 1064
#define __MSP430_TI_HEADERS__
#ifdef __cplusplus
extern "C" {
#endif
#include <iomacros.h>
/************************************************************
* STANDARD BITS
************************************************************/
#define BIT0 (0x0001)
#define BIT1 (0x0002)
#define BIT2 (0x0004)
#define BIT3 (0x0008)
#define BIT4 (0x0010)
#define BIT5 (0x0020)
#define BIT6 (0x0040)
#define BIT7 (0x0080)
#define BIT8 (0x0100)
#define BIT9 (0x0200)
#define BITA (0x0400)
#define BITB (0x0800)
#define BITC (0x1000)
#define BITD (0x2000)
#define BITE (0x4000)
#define BITF (0x8000)
/************************************************************
* STATUS REGISTER BITS
************************************************************/
#define C (0x0001)
#define Z (0x0002)
#define N (0x0004)
#define V (0x0100)
#define GIE (0x0008)
#define CPUOFF (0x0010)
#define OSCOFF (0x0020)
#define SCG0 (0x0040)
#define SCG1 (0x0080)
/* Low Power Modes coded with Bits 4-7 in SR */
#ifndef __STDC__ /* Begin #defines for assembler */
#define LPM0 (CPUOFF)
#define LPM1 (SCG0+CPUOFF)
#define LPM2 (SCG1+CPUOFF)
#define LPM3 (SCG1+SCG0+CPUOFF)
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
/* End #defines for assembler */
#else /* Begin #defines for C */
#define LPM0_bits (CPUOFF)
#define LPM1_bits (SCG0+CPUOFF)
#define LPM2_bits (SCG1+CPUOFF)
#define LPM3_bits (SCG1+SCG0+CPUOFF)
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
#include "in430.h"
#define LPM0 _BIS_SR(LPM0_bits) /* Enter Low Power Mode 0 */
#define LPM0_EXIT _BIC_SR_IRQ(LPM0_bits) /* Exit Low Power Mode 0 */
#define LPM1 _BIS_SR(LPM1_bits) /* Enter Low Power Mode 1 */
#define LPM1_EXIT _BIC_SR_IRQ(LPM1_bits) /* Exit Low Power Mode 1 */
#define LPM2 _BIS_SR(LPM2_bits) /* Enter Low Power Mode 2 */
#define LPM2_EXIT _BIC_SR_IRQ(LPM2_bits) /* Exit Low Power Mode 2 */
#define LPM3 _BIS_SR(LPM3_bits) /* Enter Low Power Mode 3 */
#define LPM3_EXIT _BIC_SR_IRQ(LPM3_bits) /* Exit Low Power Mode 3 */
#define LPM4 _BIS_SR(LPM4_bits) /* Enter Low Power Mode 4 */
#define LPM4_EXIT _BIC_SR_IRQ(LPM4_bits) /* Exit Low Power Mode 4 */
#endif /* End #defines for C */
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
#define IE1_ 0x0000 /* Interrupt Enable 1 */
sfrb(IE1, IE1_);
#define U0IE IE1 /* UART0 Interrupt Enable Register */
#define WDTIE (0x01) /* Watchdog Interrupt Enable */
#define OFIE (0x02) /* Osc. Fault Interrupt Enable */
#define NMIIE (0x10) /* NMI Interrupt Enable */
#define ACCVIE (0x20) /* Flash Access Violation Interrupt Enable */
#define URXIE0 (0x40)
#define UTXIE0 (0x80)
#define IFG1_ 0x0002 /* Interrupt Flag 1 */
sfrb(IFG1, IFG1_);
#define U0IFG IFG1 /* UART0 Interrupt Flag Register */
#define WDTIFG (0x01) /* Watchdog Interrupt Flag */
#define OFIFG (0x02) /* Osc. Fault Interrupt Flag */
#define PORIFG (0x04) /* Power On Interrupt Flag */
#define RSTIFG (0x08) /* Reset Interrupt Flag */
#define NMIIFG (0x10) /* NMI Interrupt Flag */
#define URXIFG0 (0x40)
#define UTXIFG0 (0x80)
#define ME1_ 0x0004 /* Module Enable 1 */
sfrb(ME1, ME1_);
#define U0ME ME1 /* UART0 Module Enable Register */
#define URXE0 (0x40)
#define UTXE0 (0x80)
#define USPIE0 (0x40)
/************************************************************
* Basic Clock Module
************************************************************/
#define __MSP430_HAS_BC2__ /* Definition to show that Module is available */
#define DCOCTL_ 0x0056 /* DCO Clock Frequency Control */
sfrb(DCOCTL, DCOCTL_);
#define BCSCTL1_ 0x0057 /* Basic Clock System Control 1 */
sfrb(BCSCTL1, BCSCTL1_);
#define BCSCTL2_ 0x0058 /* Basic Clock System Control 2 */
sfrb(BCSCTL2, BCSCTL2_);
#define BCSCTL3_ 0x0053 /* Basic Clock System Control 3 */
sfrb(BCSCTL3, BCSCTL3_);
#define MOD0 (0x01) /* Modulation Bit 0 */
#define MOD1 (0x02) /* Modulation Bit 1 */
#define MOD2 (0x04) /* Modulation Bit 2 */
#define MOD3 (0x08) /* Modulation Bit 3 */
#define MOD4 (0x10) /* Modulation Bit 4 */
#define DCO0 (0x20) /* DCO Select Bit 0 */
#define DCO1 (0x40) /* DCO Select Bit 1 */
#define DCO2 (0x80) /* DCO Select Bit 2 */
#define RSEL0 (0x01) /* Range Select Bit 0 */
#define RSEL1 (0x02) /* Range Select Bit 1 */
#define RSEL2 (0x04) /* Range Select Bit 2 */
#define RSEL3 (0x08) /* Range Select Bit 3 */
#define DIVA0 (0x10) /* ACLK Divider 0 */
#define DIVA1 (0x20) /* ACLK Divider 1 */
#define XTS (0x40) /* LFXTCLK 0:Low Freq. / 1: High Freq. */
#define XT2OFF (0x80) /* Enable XT2CLK */
#define DIVA_0 (0x00) /* ACLK Divider 0: /1 */
#define DIVA_1 (0x10) /* ACLK Divider 1: /2 */
#define DIVA_2 (0x20) /* ACLK Divider 2: /4 */
#define DIVA_3 (0x30) /* ACLK Divider 3: /8 */
#define DIVS0 (0x02) /* SMCLK Divider 0 */
#define DIVS1 (0x04) /* SMCLK Divider 1 */
#define SELS (0x08) /* SMCLK Source Select 0:DCOCLK / 1:XT2CLK/LFXTCLK */
#define DIVM0 (0x10) /* MCLK Divider 0 */
#define DIVM1 (0x20) /* MCLK Divider 1 */
#define SELM0 (0x40) /* MCLK Source Select 0 */
#define SELM1 (0x80) /* MCLK Source Select 1 */
#define DIVS_0 (0x00) /* SMCLK Divider 0: /1 */
#define DIVS_1 (0x02) /* SMCLK Divider 1: /2 */
#define DIVS_2 (0x04) /* SMCLK Divider 2: /4 */
#define DIVS_3 (0x06) /* SMCLK Divider 3: /8 */
#define DIVM_0 (0x00) /* MCLK Divider 0: /1 */
#define DIVM_1 (0x10) /* MCLK Divider 1: /2 */
#define DIVM_2 (0x20) /* MCLK Divider 2: /4 */
#define DIVM_3 (0x30) /* MCLK Divider 3: /8 */
#define SELM_0 (0x00) /* MCLK Source Select 0: DCOCLK */
#define SELM_1 (0x40) /* MCLK Source Select 1: DCOCLK */
#define SELM_2 (0x80) /* MCLK Source Select 2: XT2CLK/LFXTCLK */
#define SELM_3 (0xC0) /* MCLK Source Select 3: LFXTCLK */
#define LFXT1OF (0x01) /* Low/high Frequency Oscillator Fault Flag */
#define XT2OF (0x02) /* High frequency oscillator 2 fault flag */
#define XCAP0 (0x04) /* XIN/XOUT Cap 0 */
#define XCAP1 (0x08) /* XIN/XOUT Cap 1 */
#define LFXT1S0 (0x10) /* Mode 0 for LFXT1 (XTS = 0) */
#define LFXT1S1 (0x20) /* Mode 1 for LFXT1 (XTS = 0) */
#define XT2S0 (0x40) /* Mode 0 for XT2 */
#define XT2S1 (0x80) /* Mode 1 for XT2 */
#define XCAP_0 (0x00) /* XIN/XOUT Cap : 0 pF */
#define XCAP_1 (0x04) /* XIN/XOUT Cap : 6 pF */
#define XCAP_2 (0x08) /* XIN/XOUT Cap : 10 pF */
#define XCAP_3 (0x0C) /* XIN/XOUT Cap : 12.5 pF */
#define LFXT1S_0 (0x00) /* Mode 0 for LFXT1 : Normal operation */
#define LFXT1S_1 (0x10) /* Mode 1 for LFXT1 : Reserved */
#define LFXT1S_2 (0x20) /* Mode 2 for LFXT1 : VLO */
#define LFXT1S_3 (0x30) /* Mode 3 for LFXT1 : Digital input signal */
#define XT2S_0 (0x00) /* Mode 0 for XT2 : 0.4 - 1 MHz */
#define XT2S_1 (0x40) /* Mode 1 for XT2 : 1 - 4 MHz */
#define XT2S_2 (0x80) /* Mode 2 for XT2 : 2 - 16 MHz */
#define XT2S_3 (0xC0) /* Mode 3 for XT2 : Digital input signal */
/*************************************************************
* Flash Memory
*************************************************************/
#define __MSP430_HAS_FLASH2__ /* Definition to show that Module is available */
#define FCTL1_ 0x0128 /* FLASH Control 1 */
sfrw(FCTL1, FCTL1_);
#define FCTL2_ 0x012A /* FLASH Control 2 */
sfrw(FCTL2, FCTL2_);
#define FCTL3_ 0x012C /* FLASH Control 3 */
sfrw(FCTL3, FCTL3_);
#define FRKEY (0x9600) /* Flash key returned by read */
#define FWKEY (0xA500) /* Flash key for write */
#define FXKEY (0x3300) /* for use with XOR instruction */
#define ERASE (0x0002) /* Enable bit for Flash segment erase */
#define MERAS (0x0004) /* Enable bit for Flash mass erase */
#define WRT (0x0040) /* Enable bit for Flash write */
#define BLKWRT (0x0080) /* Enable bit for Flash segment write */
#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */
#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
#ifndef FN2
#define FN2 (0x0004)
#endif
#ifndef FN3
#define FN3 (0x0008)
#endif
#ifndef FN4
#define FN4 (0x0010)
#endif
#define FN5 (0x0020)
#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */
#define FSSEL1 (0x0080) /* Flash clock select 1 */
#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */
#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */
#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */
#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */
#define BUSY (0x0001) /* Flash busy: 1 */
#define KEYV (0x0002) /* Flash Key violation flag */
#define ACCVIFG (0x0004) /* Flash Access violation flag */
#define WAIT (0x0008) /* Wait flag for segment write */
#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */
#define EMEX (0x0020) /* Flash Emergency Exit */
#define LOCKA (0x0040) /* Segment A Lock bit: read = 1 - Segment is locked (read only) */
#define FAIL (0x0080) /* Last Program or Erase failed */
/************************************************************
* HARDWARE MULTIPLIER
************************************************************/
#define __MSP430_HAS_MPY__ /* Definition to show that Module is available */
#define MPY_ 0x0130 /* Multiply Unsigned/Operand 1 */
sfrw(MPY, MPY_);
#define MPYS_ 0x0132 /* Multiply Signed/Operand 1 */
sfrw(MPYS, MPYS_);
#define MAC_ 0x0134 /* Multiply Unsigned and Accumulate/Operand 1 */
sfrw(MAC, MAC_);
#define MACS_ 0x0136 /* Multiply Signed and Accumulate/Operand 1 */
sfrw(MACS, MACS_);
#define OP2_ 0x0138 /* Operand 2 */
sfrw(OP2, OP2_);
#define RESLO_ 0x013A /* Result Low Word */
sfrw(RESLO, RESLO_);
#define RESHI_ 0x013C /* Result High Word */
sfrw(RESHI, RESHI_);
#define SUMEXT_ 0x013E /* Sum Extend */
const_sfrw(SUMEXT, SUMEXT_);
/************************************************************
* DIGITAL I/O Port1/2 Pull up / Pull down Resistors
************************************************************/
#define __MSP430_HAS_PORT1_R__ /* Definition to show that Module is available */
#define __MSP430_HAS_PORT2_R__ /* Definition to show that Module is available */
#define P1IN_ 0x0020 /* Port 1 Input */
const_sfrb(P1IN, P1IN_);
#define P1OUT_ 0x0021 /* Port 1 Output */
sfrb(P1OUT, P1OUT_);
#define P1DIR_ 0x0022 /* Port 1 Direction */
sfrb(P1DIR, P1DIR_);
#define P1IFG_ 0x0023 /* Port 1 Interrupt Flag */
sfrb(P1IFG, P1IFG_);
#define P1IES_ 0x0024 /* Port 1 Interrupt Edge Select */
sfrb(P1IES, P1IES_);
#define P1IE_ 0x0025 /* Port 1 Interrupt Enable */
sfrb(P1IE, P1IE_);
#define P1SEL_ 0x0026 /* Port 1 Selection */
sfrb(P1SEL, P1SEL_);
#define P1SEL2_ 0x0041 /* Port 1 Selection 2 */
sfrb(P1SEL2, P1SEL2_);
#define P1REN_ 0x0027 /* Port 1 Resistor Enable */
sfrb(P1REN, P1REN_);
#define P2IN_ 0x0028 /* Port 2 Input */
const_sfrb(P2IN, P2IN_);
#define P2OUT_ 0x0029 /* Port 2 Output */
sfrb(P2OUT, P2OUT_);
#define P2DIR_ 0x002A /* Port 2 Direction */
sfrb(P2DIR, P2DIR_);
#define P2IFG_ 0x002B /* Port 2 Interrupt Flag */
sfrb(P2IFG, P2IFG_);
#define P2IES_ 0x002C /* Port 2 Interrupt Edge Select */
sfrb(P2IES, P2IES_);
#define P2IE_ 0x002D /* Port 2 Interrupt Enable */
sfrb(P2IE, P2IE_);
#define P2SEL_ 0x002E /* Port 2 Selection */
sfrb(P2SEL, P2SEL_);
#define P2SEL2_ 0x0042 /* Port 2 Selection 2 */
sfrb(P2SEL2, P2SEL2_);
#define P2REN_ 0x002F /* Port 2 Resistor Enable */
sfrb(P2REN, P2REN_);
/************************************************************
* SD24_A1 - Sigma Delta 24 Bit
************************************************************/
#define __MSP430_HAS_SD24_A1__ /* Definition to show that Module is available */
#define SD24INCTL0_ 0x00B0 /* SD24 Input Control Register Channel 0 */
sfrb(SD24INCTL0, SD24INCTL0_);
#define SD24PRE0_ 0x00B8 /* SD24 Preload Register Channel 0 */
sfrb(SD24PRE0, SD24PRE0_);
#define SD24CONF1_ 0x00BF /* SD24 Internal Configuration Register 1 */
sfrb(SD24CONF1, SD24CONF1_);
/* Please use only the recommended settings */
#define SD24CTL_ 0x0100 /* Sigma Delta ADC 24 Control Register */
sfrw(SD24CTL, SD24CTL_);
#define SD24CCTL0_ 0x0102 /* SD24 Channel 0 Control Register */
sfrw(SD24CCTL0, SD24CCTL0_);
#define SD24MEM0_ 0x0110 /* SD24 Channel 0 Conversion Memory */
sfrw(SD24MEM0, SD24MEM0_);
#define SD24IV_ 0x01AE /* SD24 Interrupt Vector Register */
sfrw(SD24IV, SD24IV_);
/* SD24INCTLx */
#define SD24INCH0 (0x0001) /* SD24 Input Channel select 0 */
#define SD24INCH1 (0x0002) /* SD24 Input Channel select 1 */
#define SD24INCH2 (0x0004) /* SD24 Input Channel select 2 */
#define SD24GAIN0 (0x0008) /* SD24 Input Pre-Amplifier Gain Select 0 */
#define SD24GAIN1 (0x0010) /* SD24 Input Pre-Amplifier Gain Select 1 */
#define SD24GAIN2 (0x0020) /* SD24 Input Pre-Amplifier Gain Select 2 */
#define SD24INTDLY0 (0x0040) /* SD24 Interrupt Delay after 1.Conversion 0 */
#define SD24INTDLY1 (0x0080) /* SD24 Interrupt Delay after 1.Conversion 1 */
#define SD24GAIN_1 (0x0000) /* SD24 Input Pre-Amplifier Gain Select *1 */
#define SD24GAIN_2 (0x0008) /* SD24 Input Pre-Amplifier Gain Select *2 */
#define SD24GAIN_4 (0x0010) /* SD24 Input Pre-Amplifier Gain Select *4 */
#define SD24GAIN_8 (0x0018) /* SD24 Input Pre-Amplifier Gain Select *8 */
#define SD24GAIN_16 (0x0020) /* SD24 Input Pre-Amplifier Gain Select *16 */
#define SD24GAIN_32 (0x0028) /* SD24 Input Pre-Amplifier Gain Select *32 */
#define SD24INCH_0 (0x0000) /* SD24 Input Channel select input */
#define SD24INCH_1 (0x0001) /* SD24 Input Channel select input */
#define SD24INCH_2 (0x0002) /* SD24 Input Channel select input */
#define SD24INCH_3 (0x0003) /* SD24 Input Channel select input */
#define SD24INCH_4 (0x0004) /* SD24 Input Channel select input */
#define SD24INCH_5 (0x0005) /* SD24 Input Channel select Vcc divider */
#define SD24INCH_6 (0x0006) /* SD24 Input Channel select Temp */
#define SD24INCH_7 (0x0007) /* SD24 Input Channel select Offset */
#define SD24INTDLY_0 (0x0000) /* SD24 Interrupt Delay: Int. after 4.Conversion */
#define SD24INTDLY_1 (0x0040) /* SD24 Interrupt Delay: Int. after 3.Conversion */
#define SD24INTDLY_2 (0x0080) /* SD24 Interrupt Delay: Int. after 2.Conversion */
#define SD24INTDLY_3 (0x00C0) /* SD24 Interrupt Delay: Int. after 1.Conversion */
/* SD24CTL */
#define SD24OVIE (0x0002) /* SD24 Overflow Interupt Enable */
#define SD24REFON (0x0004) /* SD24 Switch internal Reference on */
#define SD24VMIDON (0x0008) /* SD24 Switch Vmid Buffer on */
#define SD24SSEL0 (0x0010) /* SD24 Clock Source Select 0 */
#define SD24SSEL1 (0x0020) /* SD24 Clock Source Select 1 */
#define SD24DIV0 (0x0040) /* SD24 Clock Divider Select 0 */
#define SD24DIV1 (0x0080) /* SD24 Clock Divider Select 1 */
#define SD24LP (0x0100) /* SD24 Low Power Mode Enable */
#define SD24XDIV0 (0x0200) /* SD24 2.Clock Divider Select 0 */
#define SD24XDIV1 (0x0400) /* SD24 2.Clock Divider Select 1 */
//#define SD24XDIV2 (0x0800) /* SD24 2.Clock Divider Select 2 */
#define SD24DIV_0 (0x0000) /* SD24 Clock Divider Select /1 */
#define SD24DIV_1 (SD24DIV0) /* SD24 Clock Divider Select /2 */
#define SD24DIV_2 (SD24DIV1) /* SD24 Clock Divider Select /4 */
#define SD24DIV_3 (SD24DIV0+SD24DIV1) /* SD24 Clock Divider Select /8 */
#define SD24XDIV_0 (0x0000) /* SD24 2.Clock Divider Select /1 */
#define SD24XDIV_1 (SD24XDIV0) /* SD24 2.Clock Divider Select /3 */
#define SD24XDIV_2 (SD24XDIV1) /* SD24 2.Clock Divider Select /16 */
#define SD24XDIV_3 (SD24XDIV0+SD24XDIV1) /* SD24 2.Clock Divider Select /48 */
#define SD24SSEL_0 (0x0000) /* SD24 Clock Source Select MCLK */
#define SD24SSEL_1 (SD24SSEL0) /* SD24 Clock Source Select SMCLK */
#define SD24SSEL_2 (SD24SSEL1) /* SD24 Clock Source Select ACLK */
#define SD24SSEL_3 (SD24SSEL0+SD24SSEL1) /* SD24 Clock Source Select TACLK */
/* SD24CCTLx */
#define SD24GRP (0x0001) /* SD24 Grouping of Channels: 0:Off/1:On */
#define SD24SC (0x0002) /* SD24 Start Conversion */
#define SD24IFG (0x0004) /* SD24 Channel x Interrupt Flag */
#define SD24IE (0x0008) /* SD24 Channel x Interrupt Enable */
#define SD24DF (0x0010) /* SD24 Channel x Data Format: 0:Unipolar/1:Bipolar */
#define SD24OVIFG (0x0020) /* SD24 Channel x Overflow Interrupt Flag */
#define SD24LSBACC (0x0040) /* SD24 Channel x Access LSB of ADC */
#define SD24LSBTOG (0x0080) /* SD24 Channel x Toggle LSB Output of ADC */
#define SD24OSR0 (0x0100) /* SD24 Channel x OverSampling Ratio 0 */
#define SD24OSR1 (0x0200) /* SD24 Channel x OverSampling Ratio 1 */
#define SD24SNGL (0x0400) /* SD24 Channel x Single Conversion On/Off */
#define SD24XOSR (0x0800) /* SD24 Channel x Extended OverSampling Ratio */
#define SD24UNI (0x1000) /* SD24 Channel x Bipolar(0) / Unipolar(1) Mode */
#define SD24OSR_1024 (SD24OSR0+SD24XOSR) /* SD24 Channel x OverSampling Ratio 1024 */
#define SD24OSR_512 (SD24XOSR) /* SD24 Channel x OverSampling Ratio 512 */
#define SD24OSR_256 (0x0000) /* SD24 Channel x OverSampling Ratio 256 */
#define SD24OSR_128 (0x0100) /* SD24 Channel x OverSampling Ratio 128 */
#define SD24OSR_64 (0x0200) /* SD24 Channel x OverSampling Ratio 64 */
#define SD24OSR_32 (0x0300) /* SD24 Channel x OverSampling Ratio 32 */
/* SD24IV Definitions */
#define SD24IV_NONE (0x0000) /* No Interrupt pending */
#define SD24IV_SD24OVIFG (0x0002) /* SD24OVIFG */
#define SD24IV_SD24MEM0 (0x0004) /* SD24MEM0 SD24IFG */
/************************************************************
* Brown-Out, Supply Voltage Supervision (SVS)
************************************************************/
#define __MSP430_HAS_SVS__ /* Definition to show that Module is available */
#define SVSCTL_ 0x0055 /* SVS Control */
sfrb(SVSCTL, SVSCTL_);
#define SVSFG (0x01) /* SVS Flag */
#define SVSOP (0x02) /* SVS output (read only) */
#define SVSON (0x04) /* Switches the SVS on/off */
#define PORON (0x08) /* Enable POR Generation if Low Voltage */
#define VLD0 (0x10)
#define VLD1 (0x20)
#define VLD2 (0x40)
#define VLD3 (0x80)
#define VLDON (0x10)
#define VLDOFF (0x00)
#define VLD_1_8V (0x10)
/************************************************************
* Timer A3
************************************************************/
#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */
#define TAIV_ 0x012E /* Timer A Interrupt Vector Word */
const_sfrw(TAIV, TAIV_);
#define TACTL_ 0x0160 /* Timer A Control */
sfrw(TACTL, TACTL_);
#define TACCTL0_ 0x0162 /* Timer A Capture/Compare Control 0 */
sfrw(TACCTL0, TACCTL0_);
#define TACCTL1_ 0x0164 /* Timer A Capture/Compare Control 1 */
sfrw(TACCTL1, TACCTL1_);
#define TACCTL2_ 0x0166 /* Timer A Capture/Compare Control 2 */
sfrw(TACCTL2, TACCTL2_);
#define TAR_ 0x0170 /* Timer A Counter Register */
sfrw(TAR, TAR_);
#define TACCR0_ 0x0172 /* Timer A Capture/Compare 0 */
sfrw(TACCR0, TACCR0_);
#define TACCR1_ 0x0174 /* Timer A Capture/Compare 1 */
sfrw(TACCR1, TACCR1_);
#define TACCR2_ 0x0176 /* Timer A Capture/Compare 2 */
sfrw(TACCR2, TACCR2_);
/* Alternate register names */
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
/* Alternate register names - 5xx style */
#define TA0IV TAIV /* Timer A Interrupt Vector Word */
#define TA0CTL TACTL /* Timer A Control */
#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
#define TA0R TAR /* Timer A Counter Register */
#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */
#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */
#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */
#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */
#define TA0CTL_ TACTL_ /* Timer A Control */
#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
#define TA0R_ TAR_ /* Timer A Counter Register */
#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
#define TIMER0_A1_VECTOR TIMERA1_VECTOR /* Int. Vector: Timer A CC1-2, TA */
#define TIMER0_A0_VECTOR TIMERA0_VECTOR /* Int. Vector: Timer A CC0 */
#define TASSEL1 (0x0200) /* Timer A clock source select 1 */
#define TASSEL0 (0x0100) /* Timer A clock source select 0 */
#define ID1 (0x0080) /* Timer A clock input divider 1 */
#define ID0 (0x0040) /* Timer A clock input divider 0 */
#define MC1 (0x0020) /* Timer A mode control 1 */
#define MC0 (0x0010) /* Timer A mode control 0 */
#define TACLR (0x0004) /* Timer A counter clear */
#define TAIE (0x0002) /* Timer A counter interrupt enable */
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
#define MC_0 (0x0000) /* Timer A mode control: 0 - Stop */
#define MC_1 (0x0010) /* Timer A mode control: 1 - Up to CCR0 */
#define MC_2 (0x0020) /* Timer A mode control: 2 - Continous up */
#define MC_3 (0x0030) /* Timer A mode control: 3 - Up/Down */
#define ID_0 (0x0000) /* Timer A input divider: 0 - /1 */
#define ID_1 (0x0040) /* Timer A input divider: 1 - /2 */
#define ID_2 (0x0080) /* Timer A input divider: 2 - /4 */
#define ID_3 (0x00C0) /* Timer A input divider: 3 - /8 */
#define TASSEL_0 (0x0000) /* Timer A clock source select: 0 - TACLK */
#define TASSEL_1 (0x0100) /* Timer A clock source select: 1 - ACLK */
#define TASSEL_2 (0x0200) /* Timer A clock source select: 2 - SMCLK */
#define TASSEL_3 (0x0300) /* Timer A clock source select: 3 - INCLK */
#define CM1 (0x8000) /* Capture mode 1 */
#define CM0 (0x4000) /* Capture mode 0 */
#define CCIS1 (0x2000) /* Capture input select 1 */
#define CCIS0 (0x1000) /* Capture input select 0 */
#define SCS (0x0800) /* Capture sychronize */
#define SCCI (0x0400) /* Latched capture signal (read) */
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
#define OUTMOD2 (0x0080) /* Output mode 2 */
#define OUTMOD1 (0x0040) /* Output mode 1 */
#define OUTMOD0 (0x0020) /* Output mode 0 */
#define CCIE (0x0010) /* Capture/compare interrupt enable */
#define CCI (0x0008) /* Capture input signal (read) */
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
#define COV (0x0002) /* Capture/compare overflow flag */
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
#define OUTMOD_0 (0x0000) /* PWM output mode: 0 - output only */
#define OUTMOD_1 (0x0020) /* PWM output mode: 1 - set */
#define OUTMOD_2 (0x0040) /* PWM output mode: 2 - PWM toggle/reset */
#define OUTMOD_3 (0x0060) /* PWM output mode: 3 - PWM set/reset */
#define OUTMOD_4 (0x0080) /* PWM output mode: 4 - toggle */
#define OUTMOD_5 (0x00A0) /* PWM output mode: 5 - Reset */
#define OUTMOD_6 (0x00C0) /* PWM output mode: 6 - PWM toggle/set */
#define OUTMOD_7 (0x00E0) /* PWM output mode: 7 - PWM reset/set */
#define CCIS_0 (0x0000) /* Capture input select: 0 - CCIxA */
#define CCIS_1 (0x1000) /* Capture input select: 1 - CCIxB */
#define CCIS_2 (0x2000) /* Capture input select: 2 - GND */
#define CCIS_3 (0x3000) /* Capture input select: 3 - Vcc */
#define CM_0 (0x0000) /* Capture mode: 0 - disabled */
#define CM_1 (0x4000) /* Capture mode: 1 - pos. edge */
#define CM_2 (0x8000) /* Capture mode: 1 - neg. edge */
#define CM_3 (0xC000) /* Capture mode: 1 - both edges */
/* TA3IV Definitions */
#define TAIV_NONE (0x0000) /* No Interrupt pending */
#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */
#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */
#define TAIV_6 (0x0006) /* Reserved */
#define TAIV_8 (0x0008) /* Reserved */
#define TAIV_TAIFG (0x000A) /* TAIFG */
/************************************************************
* USART
************************************************************/
/* UxCTL */
#define PENA (0x80) /* Parity enable */
#define PEV (0x40) /* Parity 0:odd / 1:even */
#define SPB (0x20) /* Stop Bits 0:one / 1: two */
#define CHAR (0x10) /* Data 0:7-bits / 1:8-bits */
#define LISTEN (0x08) /* Listen mode */
#define SYNC (0x04) /* UART / SPI mode */
#define MM (0x02) /* Master Mode off/on */
#define SWRST (0x01) /* USART Software Reset */
/* UxTCTL */
#define CKPH (0x80) /* SPI: Clock Phase */
#define CKPL (0x40) /* Clock Polarity */
#define SSEL1 (0x20) /* Clock Source Select 1 */
#define SSEL0 (0x10) /* Clock Source Select 0 */
#define URXSE (0x08) /* Receive Start edge select */
#define TXWAKE (0x04) /* TX Wake up mode */
#define STC (0x02) /* SPI: STC enable 0:on / 1:off */
#define TXEPT (0x01) /* TX Buffer empty */
/* UxRCTL */
#define FE (0x80) /* Frame Error */
#define PE (0x40) /* Parity Error */
#define OE (0x20) /* Overrun Error */
#define BRK (0x10) /* Break detected */
#define URXEIE (0x08) /* RX Error interrupt enable */
#define URXWIE (0x04) /* RX Wake up interrupt enable */
#define RXWAKE (0x02) /* RX Wake up detect */
#define RXERR (0x01) /* RX Error Error */
/************************************************************
* USART 0
************************************************************/
#define __MSP430_HAS_UART0__ /* Definition to show that Module is available */
#define U0CTL_ 0x0070 /* USART 0 Control */
sfrb(U0CTL, U0CTL_);
#define U0TCTL_ 0x0071 /* USART 0 Transmit Control */
sfrb(U0TCTL, U0TCTL_);
#define U0RCTL_ 0x0072 /* USART 0 Receive Control */
sfrb(U0RCTL, U0RCTL_);
#define U0MCTL_ 0x0073 /* USART 0 Modulation Control */
sfrb(U0MCTL, U0MCTL_);
#define U0BR0_ 0x0074 /* USART 0 Baud Rate 0 */
sfrb(U0BR0, U0BR0_);
#define U0BR1_ 0x0075 /* USART 0 Baud Rate 1 */
sfrb(U0BR1, U0BR1_);
#define U0RXBUF_ 0x0076 /* USART 0 Receive Buffer */
const_sfrb(U0RXBUF, U0RXBUF_);
#define U0TXBUF_ 0x0077 /* USART 0 Transmit Buffer */
sfrb(U0TXBUF, U0TXBUF_);
/* Alternate register names */
#define UCTL0 U0CTL /* USART 0 Control */
#define UTCTL0 U0TCTL /* USART 0 Transmit Control */
#define URCTL0 U0RCTL /* USART 0 Receive Control */
#define UMCTL0 U0MCTL /* USART 0 Modulation Control */
#define UBR00 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR10 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL0_ U0CTL_ /* USART 0 Control */
#define UTCTL0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR00_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR10_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF0_ U0TXBUF_ /* USART 0 Transmit Buffer */
#define UCTL_0 U0CTL /* USART 0 Control */
#define UTCTL_0 U0TCTL /* USART 0 Transmit Control */
#define URCTL_0 U0RCTL /* USART 0 Receive Control */
#define UMCTL_0 U0MCTL /* USART 0 Modulation Control */
#define UBR0_0 U0BR0 /* USART 0 Baud Rate 0 */
#define UBR1_0 U0BR1 /* USART 0 Baud Rate 1 */
#define RXBUF_0 U0RXBUF /* USART 0 Receive Buffer */
#define TXBUF_0 U0TXBUF /* USART 0 Transmit Buffer */
#define UCTL_0_ U0CTL_ /* USART 0 Control */
#define UTCTL_0_ U0TCTL_ /* USART 0 Transmit Control */
#define URCTL_0_ U0RCTL_ /* USART 0 Receive Control */
#define UMCTL_0_ U0MCTL_ /* USART 0 Modulation Control */
#define UBR0_0_ U0BR0_ /* USART 0 Baud Rate 0 */
#define UBR1_0_ U0BR1_ /* USART 0 Baud Rate 1 */
#define RXBUF_0_ U0RXBUF_ /* USART 0 Receive Buffer */
#define TXBUF_0_ U0TXBUF_ /* USART 0 Transmit Buffer */
/************************************************************
* WATCHDOG TIMER
************************************************************/
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
#define WDTCTL_ 0x0120 /* Watchdog Timer Control */
sfrw(WDTCTL, WDTCTL_);
/* The bit names have been prefixed with "WDT" */
#define WDTIS0 (0x0001)
#define WDTIS1 (0x0002)
#define WDTSSEL (0x0004)
#define WDTCNTCL (0x0008)
#define WDTTMSEL (0x0010)
#define WDTNMI (0x0020)
#define WDTNMIES (0x0040)
#define WDTHOLD (0x0080)
#define WDTPW (0x5A00)
/* WDT-interval times [1ms] coded with Bits 0-2 */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* Watchdog mode -> reset after expired time */
/* WDT is clocked by fSMCLK (assumed 1MHz) */
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
/* WDT is clocked by fACLK (assumed 32KHz) */
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
/* INTERRUPT CONTROL */
/* These two bits are defined in the Special Function Registers */
/* #define WDTIE 0x01 */
/* #define WDTIFG 0x01 */
/************************************************************
* Calibration Data in Info Mem
************************************************************/
#ifndef __DisableCalData
#define CALDCO_12MHZ_ 0x10FA /* DCOCTL Calibration Data for 12MHz */
const_sfrb(CALDCO_12MHZ, CALDCO_12MHZ_);
#define CALBC1_12MHZ_ 0x10FB /* BCSCTL1 Calibration Data for 12MHz */
const_sfrb(CALBC1_12MHZ, CALBC1_12MHZ_);
#define CALDCO_8MHZ_ 0x10FC /* DCOCTL Calibration Data for 8MHz */
const_sfrb(CALDCO_8MHZ, CALDCO_8MHZ_);
#define CALBC1_8MHZ_ 0x10FD /* BCSCTL1 Calibration Data for 8MHz */
const_sfrb(CALBC1_8MHZ, CALBC1_8MHZ_);
#endif /* #ifndef __DisableCalData */
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
#define PORT2_VECTOR (0x0002) /* 0xFFE2 Port 2 */
#define PORT1_VECTOR (0x0008) /* 0xFFE8 Port 1 */
#define TIMERA1_VECTOR (0x000A) /* 0xFFEA Timer A CC1, TA */
#define TIMERA0_VECTOR (0x000C) /* 0xFFEC Timer A CC0 */
#define USART0TX_VECTOR (0x0010) /* 0xFFF0 USART 0 Transmit */
#define USART0RX_VECTOR (0x0012) /* 0xFFF2 USART 0 Receive */
#define WDT_VECTOR (0x0014) /* 0xFFF4 Watchdog Timer */
#define SD24_VECTOR (0x0018) /* 0xFFF8 Sigma Delta ADC */
#define NMI_VECTOR (0x001C) /* 0xFFFC Non-maskable */
#define RESET_VECTOR (0x001E) /* 0xFFFE Reset [Highest Priority] */
/************************************************************
* End of Modules
************************************************************/
#ifdef __cplusplus
}
#endif /* extern "C" */
#endif /* #ifndef __MSP430AFE221 */
|