/usr/share/mibs/netsnmp/UCD-SNMP-MIB is in libsnmp-base 5.4.3~dfsg-2.8+deb7u1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 | UCD-SNMP-MIB DEFINITIONS ::= BEGIN
-- Design notes:
--
-- The design of this mib may seem unusual in parts, as it was
-- designed for ease of numerical management routines.
--
-- In that light, most sub-sections of this mib have four common
-- numerical oid consistencies:
--
-- 2021.ID.1 : an integer index value. In scalers, this is always
-- of value 1. In tables it is a row index.
-- 2021.ID.2 : a name of the script, process, etc. that this row represents.
-- 2021.ID.100 : An error flag indicating if an error is present on
-- that row (a threshold value was crossed, etc).
-- 2021.ID.101 : An error string describing why the error flag is non-0.
--
-- These conventions enable managers to easy examine portions of the
-- mib by setting the ID to the sub-section they are interested in
-- monitoring, and then scanning the .100 value to check for an
-- error(s), and get a more specific error message from .101 for the
-- named check found in .2.
--
-- Row numbers between 2 and 100 are sub-section specific.
--
-- Mib sections utilizing the above conventions:
-- Tables: procTable, execTable, diskTable, loadTable
-- Scalers: memory, snmperrs
IMPORTS
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY,
Integer32, Opaque, enterprises, Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString, TruthValue
FROM SNMPv2-TC;
ucdavis MODULE-IDENTITY
LAST-UPDATED "200611220000Z"
ORGANIZATION "University of California, Davis"
CONTACT-INFO
"This mib is no longer being maintained by the University of
California and is now in life-support-mode and being
maintained by the net-snmp project. The best place to write
for public questions about the net-snmp-coders mailing list
at net-snmp-coders@lists.sourceforge.net.
postal: Wes Hardaker
P.O. Box 382
Davis CA 95617
email: net-snmp-coders@lists.sourceforge.net
"
DESCRIPTION
"This file defines the private UCD SNMP MIB extensions."
REVISION "200611220000Z"
DESCRIPTION
"Clarify behaviour of objects in the memory & systemStats groups
(including updated versions of malnamed mem*Text objects).
Define suitable TCs to describe error reporting/fix behaviour."
REVISION "200404070000Z"
DESCRIPTION
"Added ssCpuRawSoftIRQ for Linux (2.6) and forgotten raw swap counters."
REVISION "200209050000Z"
DESCRIPTION
"Deprecate the non-raw objects."
REVISION "200109200000Z"
DESCRIPTION
"Group to monitor log files"
REVISION "200101170000Z"
DESCRIPTION
"Added raw CPU and IO counters."
REVISION "9912090000Z"
DESCRIPTION
"SMIv2 version converted from older MIB definitions."
::= { enterprises 2021 }
-- Current UCD core mib table entries:
-- prTable OBJECT IDENTIFIER ::= { ucdavis 2 }
-- memory OBJECT IDENTIFIER ::= { ucdavis 4 }
-- extTable OBJECT IDENTIFIER ::= { ucdavis 8 }
-- diskTable OBJECT IDENTIFIER ::= { ucdavis 9 }
-- loadTable OBJECT IDENTIFIER ::= { ucdavis 10 }
-- systemStats OBJECT IDENTIFIER ::= { ucdavis 11 }
-- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } - UCD-DEMO-MIB
-- fileTable OBJECT IDENTIFIER ::= { ucdavis 15 }
-- logMatch OBJECT IDENTIFIER ::= { ucdavis 16 }
-- version OBJECT IDENTIFIER ::= { ucdavis 100 }
-- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 }
-- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 }
-- Older mib table entries that were changed to new locations above:
-- processes OBJECT IDENTIFIER ::= { ucdavis 1 }
-- exec OBJECT IDENTIFIER ::= { ucdavis 3 }
-- disk OBJECT IDENTIFIER ::= { ucdavis 6 }
-- load OBJECT IDENTIFIER ::= { ucdavis 7 }
-- Never implemented and removed from the mib:
-- lockd OBJECT IDENTIFIER ::= { ucdavis 5 }
-- Branches for registering other UCD MIB modules:
ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 }
ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 }
-- OID values assigned in the ucdExperimental branch:
-- ucdIpFwAccMIB OBJECT IDENTIFIER ::= { ucdExperimental 1 } - UCD-IPFWACC-MIB
-- ucdIpFilter OBJECT IDENTIFIER ::= { ucdExperimental 2 } - UCD-IPFILTER-MIB
-- wavelan OBJECT IDENTIFIER ::= { ucdExperimental 3 } - WL-MIB
-- ucdDlmodMIB OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB
-- ucdDiskIOMIB OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB
-- lmSensors OBJECT IDENTIFIER ::= { ucdExperimental 16 } - LM-SENSORS-MIB
-- These are the returned values of the agent type.
-- returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0
ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 }
hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 }
sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 }
solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 }
osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 }
ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 }
hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 }
netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 }
freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 }
irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 }
linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 }
bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 }
openbsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 }
win32 OBJECT IDENTIFIER ::= { ucdSnmpAgent 13 } -- unlucky
hpux11 OBJECT IDENTIFIER ::= { ucdSnmpAgent 14 }
unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 }
--
-- Define the Float Textual Convention
-- This definition was written by David Perkins.
--
Float ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A single precision floating-point number. The semantics
and encoding are identical for type 'single' defined in
IEEE Standard for Binary Floating-Point,
ANSI/IEEE Std 754-1985.
The value is restricted to the BER serialization of
the following ASN.1 type:
FLOATTYPE ::= [120] IMPLICIT FloatType
(note: the value 120 is the sum of '30'h and '48'h)
The BER serialization of the length for values of
this type must use the definite length, short
encoding form.
For example, the BER serialization of value 123
of type FLOATTYPE is '9f780442f60000'h. (The tag
is '9f78'h; the length is '04'h; and the value is
'42f60000'h.) The BER serialization of value
'9f780442f60000'h of data type Opaque is
'44079f780442f60000'h. (The tag is '44'h; the length
is '07'h; and the value is '9f780442f60000'h."
SYNTAX Opaque (SIZE (7))
UCDErrorFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a possible error condition"
SYNTAX INTEGER { noError(0), error(1) }
UCDErrorFix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a 'push-button' object, to invoke a suitable
configured action. Will always return 0 when read."
SYNTAX INTEGER { noError(0), runFix(1) }
--
-- Process table checks
--
prTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information on running
programs/daemons configured for monitoring in the
snmpd.conf file of the agent. Processes violating the
number of running processes required by the agent's
configuration file are flagged with numerical and
textual errors."
::= { ucdavis 2 }
prEntry OBJECT-TYPE
SYNTAX PrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a process and its statistics."
INDEX { prIndex }
::= { prTable 1 }
PrEntry ::= SEQUENCE {
prIndex Integer32,
prNames DisplayString,
prMin Integer32,
prMax Integer32,
prCount Integer32,
prErrorFlag UCDErrorFlag,
prErrMessage DisplayString,
prErrFix UCDErrorFix,
prErrFixCmd DisplayString
}
prIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference Index for each observed process."
::= { prEntry 1 }
prNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process name we're counting/checking on."
::= { prEntry 2 }
prMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of processes that should be
running. An error flag is generated if the number of
running processes is < the minimum."
::= { prEntry 3 }
prMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of processes that should be
running. An error flag is generated if the number of
running processes is > the maximum."
::= { prEntry 4 }
prCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current processes running with the name
in question."
::= { prEntry 5 }
prErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Error flag to indicate trouble with a process. It
goes to 1 if there is an error, 0 if no error."
::= { prEntry 100 }
prErrMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error message describing the problem (if one exists)."
::= { prEntry 101 }
prErrFix OBJECT-TYPE
SYNTAX UCDErrorFix
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to one will try to fix the problem if
the agent has been configured with a script to call
to attempt to fix problems automatically using remote
snmp operations."
::= { prEntry 102 }
prErrFixCmd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The command that gets run when the prErrFix column is
set to 1."
::= { prEntry 103 }
extTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of extensible commands returning output and
result codes. These commands are configured via the
agent's snmpd.conf file."
::= { ucdavis 8 }
extEntry OBJECT-TYPE
SYNTAX ExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing an extensible script/program and its output."
INDEX { extIndex }
::= { extTable 1 }
ExtEntry ::= SEQUENCE {
extIndex Integer32,
extNames DisplayString,
extCommand DisplayString,
extResult Integer32,
extOutput DisplayString,
extErrFix UCDErrorFix,
extErrFixCmd DisplayString
}
extIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference Index for extensible scripts. Simply an
integer row number."
::= { extEntry 1 }
extNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Short, one name description of the extensible command."
::= { extEntry 2 }
extCommand OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The command line to be executed."
::= { extEntry 3 }
extResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result code (exit status) from the executed command."
::= { extEntry 100 }
extOutput OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first line of output of the executed command."
::= { extEntry 101 }
extErrFix OBJECT-TYPE
SYNTAX UCDErrorFix
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to one will try to fix the problem if
the agent has been configured with a script to call
to attempt to fix problems automatically using remote
snmp operations."
::= { extEntry 102 }
extErrFixCmd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The command that gets run when the extErrFix column is
set to 1."
::= { extEntry 103 }
--
-- Memory usage/watch reporting.
-- Not supported on all systems!
-- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture.
--
memory OBJECT IDENTIFIER ::= { ucdavis 4 }
memIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index. This should always return the integer 0."
::= { memory 1 }
memErrorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Name. This should always return the string 'swap'."
::= { memory 2 }
memTotalSwap OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of swap space configured for this host."
::= { memory 3 }
memAvailSwap OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of swap space currently unused or available."
::= { memory 4 }
memTotalReal OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real/physical memory installed
on this host."
::= { memory 5 }
memAvailReal OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of real/physical memory currently unused
or available."
::= { memory 6 }
memTotalSwapTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of swap space or virtual memory allocated
for text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of swap space or virtual memory."
::= { memory 7 }
memAvailSwapTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of swap space or virtual memory currently
being used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of swap space or virtual memory.
Note that (despite the name), this value reports the
amount used, rather than the amount free or available
for use. For clarity, this object is being deprecated
in favour of 'memUsedSwapTXT(16)."
::= { memory 8 }
memTotalRealTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real/physical memory allocated
for text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of physical memory."
::= { memory 9 }
memAvailRealTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of real/physical memory currently being
used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of physical memory.
Note that (despite the name), this value reports the
amount used, rather than the amount free or available
for use. For clarity, this object is being deprecated
in favour of 'memUsedRealTXT(17)."
::= { memory 10 }
memTotalFree OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of memory free or available for use on
this host. This value typically covers both real memory
and swap space or virtual memory."
::= { memory 11 }
memMinimumSwap OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of swap space expected to be kept
free or available during normal operation of this host.
If this value (as reported by 'memAvailSwap(4)') falls
below the specified level, then 'memSwapError(100)' will
be set to 1 and an error message made available via
'memSwapErrorMsg(101)'."
::= { memory 12 }
memShared OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as shared memory.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 13 }
memBuffer OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as memory buffers.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 14 }
memCached OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as cached memory.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 15 }
memUsedSwapTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of swap space or virtual memory currently
being used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of swap space or virtual memory."
::= { memory 16 }
memUsedRealTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of real/physical memory currently being
used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of physical memory."
::= { memory 17 }
memSwapError OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the amount of available swap space
(as reported by 'memAvailSwap(4)'), is less than the
desired minimum (specified by 'memMinimumSwap(12)')."
::= { memory 100 }
memSwapErrorMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes whether the amount of available swap space
(as reported by 'memAvailSwap(4)'), is less than the
desired minimum (specified by 'memMinimumSwap(12)')."
::= { memory 101 }
dskTable OBJECT-TYPE
SYNTAX SEQUENCE OF DskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Disk watching information. Partions to be watched
are configured by the snmpd.conf file of the agent."
::= { ucdavis 9 }
dskEntry OBJECT-TYPE
SYNTAX DskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a disk and its statistics."
INDEX { dskIndex }
::= { dskTable 1 }
DskEntry ::= SEQUENCE {
dskIndex Integer32,
dskPath DisplayString,
dskDevice DisplayString,
dskMinimum Integer32,
dskMinPercent Integer32,
dskTotal Integer32,
dskAvail Integer32,
dskUsed Integer32,
dskPercent Integer32,
dskPercentNode Integer32,
dskErrorFlag UCDErrorFlag,
dskErrorMsg DisplayString
}
dskIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Integer reference number (row number) for the disk mib."
::= { dskEntry 1 }
dskPath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path where the disk is mounted."
::= { dskEntry 2 }
dskDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path of the device for the partition"
::= { dskEntry 3 }
dskMinimum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum space required on the disk (in kBytes) before the
errors are triggered. Either this or dskMinPercent is
configured via the agent's snmpd.conf file."
::= { dskEntry 4 }
dskMinPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of minimum space required on the disk before the
errors are triggered. Either this or dskMinimum is
configured via the agent's snmpd.conf file."
::= { dskEntry 5 }
dskTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of the disk/partion (kBytes).
For large disks (>2Tb), this value will
latch at INT32_MAX (2147483647)."
::= { dskEntry 6 }
dskAvail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Available space on the disk.
For large lightly-used disks (>2Tb), this
value will latch at INT32_MAX (2147483647)."
::= { dskEntry 7 }
dskUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used space on the disk.
For large heavily-used disks (>2Tb), this
value will latch at INT32_MAX (2147483647)."
::= { dskEntry 8 }
dskPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of space used on disk"
::= { dskEntry 9 }
dskPercentNode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of inodes used on disk"
::= { dskEntry 10 }
dskErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error flag signaling that the disk or partition is under
the minimum required space configured for it."
::= { dskEntry 100 }
dskErrorMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text description providing a warning and the space left
on the disk."
::= { dskEntry 101 }
laTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Load average information."
::= { ucdavis 10 }
laEntry OBJECT-TYPE
SYNTAX LaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a load average and its values."
INDEX { laIndex }
::= { laTable 1 }
LaEntry ::= SEQUENCE {
laIndex Integer32,
laNames DisplayString,
laLoad DisplayString,
laConfig DisplayString,
laLoadInt Integer32,
laLoadFloat Float,
laErrorFlag UCDErrorFlag,
laErrMessage DisplayString
}
laIndex OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"reference index/row number for each observed loadave."
::= { laEntry 1 }
laNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of loadave names we're watching."
::= { laEntry 2 }
laLoad OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1,5 and 15 minute load averages (one per row)."
::= { laEntry 3 }
laConfig OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The watch point for load-averages to signal an
error. If the load averages rises above this value,
the laErrorFlag below is set."
::= { laEntry 4 }
laLoadInt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1,5 and 15 minute load averages as an integer.
This is computed by taking the floating point
loadaverage value and multiplying by 100, then
converting the value to an integer."
::= { laEntry 5 }
laLoadFloat OBJECT-TYPE
SYNTAX Float
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1,5 and 15 minute load averages as an opaquely
wrapped floating point number."
::= { laEntry 6 }
laErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Error flag to indicate the load-average has crossed
its threshold value defined in the snmpd.conf file.
It is set to 1 if the threshold is crossed, 0 otherwise."
::= { laEntry 100 }
laErrMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error message describing the load-average and its
surpased watch-point value."
::= { laEntry 101 }
version OBJECT IDENTIFIER ::= { ucdavis 100 }
versionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to mib (always 0)"
::= { version 1 }
versionTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CVS tag keyword"
::= { version 2 }
versionDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date string from RCS keyword"
::= { version 3 }
versionCDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date string from ctime() "
::= { version 4 }
versionIdent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Id string from RCS keyword"
::= { version 5 }
versionConfigureOptions OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options passed to the configure script when this agent was built."
::= { version 6 }
versionClearCache OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to clear the exec cache, if enabled"
::= { version 10 }
versionUpdateConfig OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to read-read the config file(s)."
::= { version 11 }
versionRestartAgent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to restart the agent."
::= { version 12 }
versionSavePersistentData OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to force the agent to save it's persistent data immediately."
::= { version 13 }
versionDoDebugging OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to turn debugging statements on in the agent or 0
to turn it off."
::= { version 20 }
snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 }
snmperrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index for snmperrs (always 0)."
::= { snmperrs 1 }
snmperrNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmp"
::= { snmperrs 2 }
snmperrErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Error flag to indicate trouble with the agent. It
goes to 1 if there is an error, 0 if no error."
::= { snmperrs 100 }
snmperrErrMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error message describing the problem (if one exists)."
::= { snmperrs 101 }
mrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table displaying all the oid's registered by mib modules in
the agent. Since the agent is modular in nature, this lists
each module's OID it is responsible for and the name of the module"
::= { ucdavis 102 }
mrEntry OBJECT-TYPE
SYNTAX MrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a registered mib oid."
INDEX { IMPLIED mrIndex }
::= { mrTable 1 }
MrEntry ::= SEQUENCE {
mrIndex OBJECT IDENTIFIER,
mrModuleName DisplayString
}
mrIndex OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The registry slot of a mibmodule."
::= { mrEntry 1 }
mrModuleName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module name that registered this OID."
::= { mrEntry 2 }
systemStats OBJECT IDENTIFIER ::= { ucdavis 11 }
ssIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index. This should always return the integer 1."
::= { systemStats 1 }
ssErrorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Name. This should always return the string 'systemStats'."
::= { systemStats 2 }
ssSwapIn OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average amount of memory swapped in from disk,
calculated over the last minute."
::= { systemStats 3 }
ssSwapOut OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average amount of memory swapped out to disk,
calculated over the last minute."
::= { systemStats 4 }
ssIOSent OBJECT-TYPE
SYNTAX Integer32
UNITS "blocks/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average amount of data written to disk or other
block device, calculated over the last minute.
This object has been deprecated in favour of
'ssIORawSent(57)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 5 }
ssIOReceive OBJECT-TYPE
SYNTAX Integer32
UNITS "blocks/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average amount of data read from disk or other
block device, calculated over the last minute.
This object has been deprecated in favour of
'ssIORawReceived(58)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 6 }
ssSysInterrupts OBJECT-TYPE
SYNTAX Integer32
UNITS "interrupts/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average rate of interrupts processed (including
the clock) calculated over the last minute.
This object has been deprecated in favour of
'ssRawInterrupts(59)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 7 }
ssSysContext OBJECT-TYPE
SYNTAX Integer32
UNITS "switches/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average rate of context switches,
calculated over the last minute.
This object has been deprecated in favour of
'ssRawContext(60)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 8 }
ssCpuUser OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The percentage of CPU time spent processing
user-level code, calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawUser(50)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 9 }
ssCpuSystem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The percentage of CPU time spent processing
system-level code, calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawSystem(52)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 10 }
ssCpuIdle OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The percentage of processor time spent idle,
calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawIdle(53)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 11 }
-- The agent only implements those of the following counters that the
-- kernel supports! Don't expect all to be present.
ssCpuRawUser OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing user-level code.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 50 }
ssCpuRawNice OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing reduced-priority code.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 51 }
ssCpuRawSystem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing system-level code.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors).
This object may sometimes be implemented as the
combination of the 'ssCpuRawWait(54)' and
'ssCpuRawKernel(55)' counters, so care must be
taken when summing the overall raw counters."
::= { systemStats 52 }
ssCpuRawIdle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
idle.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 53 }
ssCpuRawWait OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
waiting for IO.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric. This time may also be
included within the 'ssCpuRawSystem(52)' counter.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 54 }
ssCpuRawKernel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing kernel-level code.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric. This time may also be
included within the 'ssCpuRawSystem(52)' counter.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 55 }
ssCpuRawInterrupt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing hardware interrupts.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 56 }
ssIORawSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks sent to a block device"
::= { systemStats 57 }
ssIORawReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks received from a block device"
::= { systemStats 58 }
ssRawInterrupts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of interrupts processed"
::= { systemStats 59 }
ssRawContexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of context switches"
::= { systemStats 60 }
ssCpuRawSoftIRQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing software interrupts.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 61 }
ssRawSwapIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks swapped in"
::= { systemStats 62 }
ssRawSwapOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks swapped out"
::= { systemStats 63 }
-- possibly used in the future:
--
-- ssErrorFlag OBJECT-TYPE
-- SYNTAX UCDErrorFlag
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Error flag."
-- ::= { systemStats 100 }
--
-- ssErrMessage OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Error message describing the errorflag condition."
-- ::= { systemStats 101 }
ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 }
ucdStart NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap could in principle be sent when the agent start"
::= { ucdTraps 1 }
ucdShutdown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when the agent terminates"
::= { ucdTraps 2 }
--
-- File Table: monitor a list of files to check for a maximum size.
--
fileTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of monitored files."
::= { ucdavis 15 }
fileEntry OBJECT-TYPE
SYNTAX FileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of file"
INDEX { fileIndex }
::= { fileTable 1 }
FileEntry ::= SEQUENCE {
fileIndex Integer32,
fileName DisplayString,
fileSize Integer32,
fileMax Integer32,
fileErrorFlag UCDErrorFlag,
fileErrorMsg DisplayString
}
fileIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of file"
::= { fileEntry 1 }
fileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Filename"
::= { fileEntry 2 }
fileSize OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of file (kB)"
::= { fileEntry 3 }
fileMax OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit of filesize (kB)"
::= { fileEntry 4 }
fileErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit exceeded flag"
::= { fileEntry 100 }
fileErrorMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Filesize error message"
::= { fileEntry 101 }
logMatch OBJECT IDENTIFIER ::= { ucdavis 16 }
logMatchMaxEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of logmatch entries
this snmpd daemon can support."
::= { logMatch 1 }
logMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of monitored files."
::= { logMatch 2 }
logMatchEntry OBJECT-TYPE
SYNTAX LogMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of file"
INDEX { logMatchIndex }
::= { logMatchTable 1 }
LogMatchEntry ::=
SEQUENCE {
logMatchIndex
Integer32,
logMatchName
DisplayString,
logMatchFilename
DisplayString,
logMatchRegEx
DisplayString,
logMatchGlobalCounter
Counter32,
logMatchGlobalCount
Integer32,
logMatchCurrentCounter
Counter32,
logMatchCurrentCount
Integer32,
logMatchCounter
Counter32,
logMatchCount
Integer32,
logMatchCycle
Integer32,
logMatchErrorFlag
UCDErrorFlag,
logMatchRegExCompilation
DisplayString
}
logMatchIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of logmatch"
::= { logMatchEntry 1 }
logMatchName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"logmatch instance name"
::= { logMatchEntry 2 }
logMatchFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"filename to be logmatched"
::= { logMatchEntry 3 }
logMatchRegEx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"regular expression"
::= { logMatchEntry 4 }
logMatchGlobalCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"global count of matches"
::= { logMatchEntry 5 }
logMatchGlobalCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 6 }
logMatchCurrentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Regex match counter. This counter will
be reset with each logfile rotation."
::= { logMatchEntry 7 }
logMatchCurrentCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 8 }
logMatchCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Regex match counter. This counter will
be reset with each read"
::= { logMatchEntry 9 }
logMatchCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 10 }
logMatchCycle OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time between updates (if not queried) in seconds"
::= { logMatchEntry 11 }
logMatchErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"errorflag: is this line configured correctly?"
::= { logMatchEntry 100 }
logMatchRegExCompilation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"message of regex precompilation"
::= { logMatchEntry 101 }
END
|