/usr/share/mibs/netsnmp/UCD-DISKIO-MIB is in libsnmp-base 5.4.3~dfsg-2.8+deb7u1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 | UCD-DISKIO-MIB DEFINITIONS ::= BEGIN
--
-- Derived from the original VEST-INTERNETT-MIB. Open issues:
--
-- (a) where to register this MIB?
-- (b) use not-accessible for diskIOIndex?
--
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Counter64
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
ucdExperimental
FROM UCD-SNMP-MIB;
ucdDiskIOMIB MODULE-IDENTITY
LAST-UPDATED "200504200000Z"
ORGANIZATION "University of California, Davis"
CONTACT-INFO
"This mib is no longer being maintained by the University of
California and is now in life-support-mode and being
maintained by the net-snmp project. The best place to write
for public questions about the net-snmp-coders mailing list
at net-snmp-coders@lists.sourceforge.net.
postal: Wes Hardaker
P.O. Box 382
Davis CA 95617
email: net-snmp-coders@lists.sourceforge.net
"
DESCRIPTION
"This MIB module defines objects for disk IO statistics."
REVISION "200504200000Z"
DESCRIPTION
"Add 64 bit counters. Patch from Dan Nelson."
REVISION "200202130000Z"
DESCRIPTION
"Add 1, 5 and 15-minute load average objects"
REVISION "200001260000Z"
DESCRIPTION
"SMIv2 version derived from older definitions contained
in the VEST-INTERNETT-MIB module."
::= { ucdExperimental 15 }
diskIOTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiskIOEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IO devices and how much data they have read/written."
::= { ucdDiskIOMIB 1 }
diskIOEntry OBJECT-TYPE
SYNTAX DiskIOEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a device and its statistics."
INDEX { diskIOIndex }
::= { diskIOTable 1 }
DiskIOEntry ::= SEQUENCE {
diskIOIndex Integer32,
diskIODevice DisplayString,
diskIONRead Counter32,
diskIONWritten Counter32,
diskIOReads Counter32,
diskIOWrites Counter32,
diskIOLA1 Integer32,
diskIOLA5 Integer32,
diskIOLA15 Integer32,
diskIONReadX Counter64,
diskIONWrittenX Counter64
}
diskIOIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference index for each observed device."
::= { diskIOEntry 1 }
diskIODevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the device we are counting/checking."
::= { diskIOEntry 2 }
diskIONRead OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes read from this device since boot."
::= { diskIOEntry 3 }
diskIONWritten OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes written to this device since boot."
::= { diskIOEntry 4 }
diskIOReads OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of read accesses from this device since boot."
::= { diskIOEntry 5 }
diskIOWrites OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of write accesses to this device since boot."
::= { diskIOEntry 6 }
diskIOLA1 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1 minute average load of disk (%)"
::= { diskIOEntry 9 }
diskIOLA5 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 5 minute average load of disk (%)"
::= { diskIOEntry 10 }
diskIOLA15 OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 15 minute average load of disk (%)"
::= { diskIOEntry 11 }
diskIONReadX OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes read from this device since boot."
::= { diskIOEntry 12 }
diskIONWrittenX OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes written to this device since boot."
::= { diskIOEntry 13 }
END
|