/etc/watchdog.conf is in watchdog 5.15-2.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 | #ping = 172.31.14.1
#ping = 172.26.1.255
#interface = eth0
#file = /var/log/messages
#change = 1407
# Uncomment to enable test. Setting one of these values to '0' disables it.
# These values will hopefully never reboot your machine during normal use
# (if your machine is really hung, the loadavg will go much higher than 25)
#max-load-1 = 24
#max-load-5 = 18
#max-load-15 = 12
# Note that this is the number of pages!
# To get the real size, check how large the pagesize is on your machine.
#min-memory = 1
#allocatable-memory = 1
#repair-binary = /usr/sbin/repair
#repair-timeout = 60
#test-binary =
#test-timeout = 60
# The retry-timeout and repair limit are used to handle errors in a more robust
# manner. Errors must persist for longer than retry-timeout to action a repair
# or reboot, and if repair-maximum attempts are made without the test passing a
# reboot is initiated anyway.
#retry-timeout = 60
#repair-maximum = 1
#watchdog-device = /dev/watchdog
# Defaults compiled into the binary
#temperature-sensor =
#max-temperature = 90
# Defaults compiled into the binary
#admin = root
#interval = 1
#logtick = 1
#log-dir = /var/log/watchdog
# This greatly decreases the chance that watchdog won't be scheduled before
# your machine is really loaded
realtime = yes
priority = 1
# Check if rsyslogd is still running by enabling the following line
#pidfile = /var/run/rsyslogd.pid
|