libfreeipmi-dev 1.4.11-1.1+b1 / usr / include / freeipmi / spec / ipmi-comp-code-spec.h

/*
 * Copyright (C) 2003-2014 FreeIPMI Core Team
 * 
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 * 
 */


#ifndef IPMI_COMP_CODE_SPEC_H
#define IPMI_COMP_CODE_SPEC_H

#ifdef __cplusplus
extern "C" {
#endif

#define IPMI_COMP_CODE_COMMAND_SUCCESS                               0x00
#define IPMI_COMP_CODE_COMMAND_SUCCESS_STR \
  "Command Completed Normally."

#define IPMI_COMP_CODE_NODE_BUSY                                     0xC0
#define IPMI_COMP_CODE_NODE_BUSY_STR \
  "Node Busy. Command could not be processed because command " \
  "processing resources are temporarily unavailable."

#define IPMI_COMP_CODE_INVALID_COMMAND                               0xC1
#define IPMI_COMP_CODE_INVALID_COMMAND_STR \
  "Invalid Command. Used to indicate an unrecognized or unsupported command."


#define IPMI_COMP_CODE_COMMAND_INVALID_FOR_LUN                       0xC2
#define IPMI_COMP_CODE_COMMAND_INVALID_FOR_LUN_STR \
  "Command invalid for given LUN."

#define IPMI_COMP_CODE_COMMAND_TIMEOUT                               0xC3
#define IPMI_COMP_CODE_COMMAND_TIMEOUT_STR \
  "Timeout while processing command. Response unavailable."

#define IPMI_COMP_CODE_OUT_OF_SPACE                                  0xC4
#define IPMI_COMP_CODE_OUT_OF_SPACE_STR \
  "Out of space. Command could not be completed because of a " \
  "lack of storage space required to execute the given command " \
  "operation."

#define IPMI_COMP_CODE_RESERVATION_CANCELLED                         0xC5
#define IPMI_COMP_CODE_RESERVATION_CANCELLED_STR \
  "Reservation Canceled or Invalid Reservation ID."

#define IPMI_COMP_CODE_INVALID_RESERVATION_ID     IPMI_COMP_CODE_RESERVATION_CANCELLED
#define IPMI_COMP_CODE_INVALID_RESERVATION_ID_STR IPMI_COMP_CODE_RESERVATION_CANCELLED_STR

#define IPMI_COMP_CODE_REQUEST_DATA_TRUNCATED                        0xC6
#define IPMI_COMP_CODE_REQUEST_DATA_TRUNCATED_STR \
  "Request data truncated."

#define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_INVALID                   0xC7
#define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_INVALID_STR \
  "Request data length invalid."

#define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_LIMIT_EXCEEDED            0xC8
#define IPMI_COMP_CODE_REQUEST_DATA_LENGTH_LIMIT_EXCEEDED_STR \
  "Request data field length limit exceeded."

#define IPMI_COMP_CODE_PARAMETER_OUT_OF_RANGE                        0xC9
#define IPMI_COMP_CODE_PARAMETER_OUT_OF_RANGE_STR \
  "Parameter out of range. One or more parameters in the data " \
  "field of the Request are out of range. This is different from  " \
  "'Invalid data field' (CCh) code in that it indicates that the " \
  "erroneous field(s) has a contiguous range of possible values."

#define IPMI_COMP_CODE_CANNOT_RETURN_REQUESTED_NUMBER_OF_BYTES       0xCA
#define IPMI_COMP_CODE_CANNOT_RETURN_REQUESTED_NUMBER_OF_BYTES_STR \
  "Cannot return number of requested data bytes."

#define IPMI_COMP_CODE_REQUESTED_SENSOR_DATA_OR_RECORD_NOT_PRESENT   0xCB
#define IPMI_COMP_CODE_REQUESTED_SENSOR_DATA_OR_RECORD_NOT_PRESENT_STR \
  "Requested Sensor, data, or record not present."

#define IPMI_COMP_CODE_INVALID_DATA_FIELD_IN_REQUEST                 0xCC
#define IPMI_COMP_CODE_INVALID_DATA_FIELD_IN_REQUEST_STR \
  "Invalid data field in Request"

#define IPMI_COMP_CODE_COMMAND_ILLEGAL_FOR_SENSOR_OR_RECORD_TYPE     0xCD
#define IPMI_COMP_CODE_COMMAND_ILLEGAL_FOR_SENSOR_OR_RECORD_TYPE_STR \
  "Command illegal for specified sensor or record type."

#define IPMI_COMP_CODE_COMMAND_RESPONSE_COULD_NOT_BE_PROVIDED        0xCE
#define IPMI_COMP_CODE_COMMAND_RESPONSE_COULD_NOT_BE_PROVIDED_STR \
  "Command response could not be provided."

#define IPMI_COMP_CODE_CANNOT_EXECUTE_DUPLICATE_REQUEST              0xCF
#define IPMI_COMP_CODE_CANNOT_EXECUTE_DUPLICATE_REQUEST_STR \
  "Cannot execute duplicated request. This completion code is " \
  "for devices which cannot return the response that was returned " \
  "for the original instance of the request. Such devices should " \
  "provide separate commands that allow the completion status of " \
  "the original request to be determined. An Event Receiver does not " \
  "use this completion code, but returns the 00h completion code in " \
  "the response to (valid) duplicated requests."

#define IPMI_COMP_CODE_SDR_REPOSITORY_IN_UPDATE_MODE                 0xD0
#define IPMI_COMP_CODE_SDR_REPOSITORY_IN_UPDATE_MODE_STR \
  "Command response could not be provided. SDR Repository in " \
  "update mode."

#define IPMI_COMP_CODE_DEVICE_IN_FIRMWARE_UPDATE_MODE                0xD1
#define IPMI_COMP_CODE_DEVICE_IN_FIRMWARE_UPDATE_MODE_STR \
  "Command response could not be provided. Device in firmware " \
  "update mode."

#define IPMI_COMP_CODE_BMC_INITIALIZATION_IN_PROGRESS                0xD2
#define IPMI_COMP_CODE_BMC_INITIALIZATION_IN_PROGRESS_STR \
  "Command response could not be provided. BMC initialization or " \
  "initialization agent in progress."

#define IPMI_COMP_CODE_DESTINATION_UNAVAILABLE                       0xD3
#define IPMI_COMP_CODE_DESTINATION_UNAVAILABLE_STR \
  "Destination unavailable. Cannot deliver request to selected " \
  "destination. E.g. this code can be returned if a request message " \
  "is targeted to SMS, but receive message queue reception is disabled " \
  "for the particular channel."

#define IPMI_COMP_CODE_INSUFFICIENT_PRIVILEGE_LEVEL                  0xD4
#define IPMI_COMP_CODE_INSUFFICIENT_PRIVILEGE_LEVEL_STR \
  "Cannot execute command due to insufficient privilege level or other " \
  "security-based restriction (e.g. disabled for 'firmware firewall')."

#define IPMI_COMP_CODE_REQUEST_PARAMETER_NOT_SUPPORTED               0xD5
#define IPMI_COMP_CODE_REQUEST_PARAMETER_NOT_SUPPORTED_STR \
  "Cannot execute command. Command, or request parameter(s), not " \
  "supported in present state."

#define IPMI_COMP_CODE_REQUEST_PARAMETER_ILLEGAL                     0xD6
#define IPMI_COMP_CODE_REQUEST_PARAMETER_ILLEGAL_STR \
  "Cannot execute command. Parameter is illegal because command " \
  "sub-function has been disabled or is unavailable " \
  "(e.g. disabled for 'firmware firewall')."

#define IPMI_COMP_CODE_UNSPECIFIED_ERROR                             0xFF
#define IPMI_COMP_CODE_UNSPECIFIED_ERROR_STR \
  "Unspecified error."

/* DEVICE-SPECIFIC (OEM) CODES 01h-7Eh
   This range is used for command-specific codes that are also
   specific for a particular device and version. A-priori knowledge of
   the device command set is required for interpretation of these
   codes. */

/* COMMAND-SPECIFIC CODES 80h-BEh 80h-BEh
   Standard command-specific codes. This range is reserved for
   command-specific completion codes for commands specified in this
   document. */

/*
 * IPMI Device "Global Commands"
 */

/* IPMI_CMD_SET_COMMAND_ENABLES */
#define IPMI_COMP_CODE_SET_COMMAND_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND                  0x80
#define IPMI_COMP_CODE_SET_COMMAND_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND_STR \
  "attempt to enable an unsupported or un-configurable command"

/* IPMI_CMD_SET_COMMAND_SUB_FUNCTION_ENABLES */
#define IPMI_COMP_CODE_SET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND     0x80
#define IPMI_COMP_CODE_SET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND_STR \
  "attempt to enable an unsupported or un-configurable command"

/* IPMI_CMD_GET_COMMAND_SUB_FUNCTION_ENABLES */
#define IPMI_COMP_CODE_GET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND     0x80
#define IPMI_COMP_CODE_GET_COMMAND_SUB_FUNCTION_ENABLES_ATTMPT_TO_ENABLE_AN_UNSUPPORTED_OR_UNCONFIGURABLE_COMMAND_STR \
  "attempt to enable an unsupported or un-configurable command"

/*
 * BMC Watchdog Timer Commands
 */

/* IPMI_CMD_RESET_WATCHDOG_TIMER */
#define IPMI_COMP_CODE_RESET_WATCHDOG_TIMER_ATTEMPT_TO_START_UNINITIALIZED_WATCHDOG                                   0x80
#define IPMI_COMP_CODE_RESET_WATCHDOG_TIMER_ATTEMPT_TO_START_UNINITIALIZED_WATCHDOG_STR \
  "Attempt to start un-initialized watchdog."

/*
 * BMC Device and Messaging Commands
 */

/* IPMI_CMD_GET_MESSAGE */

#define IPMI_COMP_CODE_GET_MESSAGE_DATA_NOT_AVAILABLE                                                                 0x80
#define IPMI_COMP_CODE_GET_MESSAGE_DATA_NOT_AVAILABLE_STR \
  "data not available (queue/buffer empty)"

/* IPMI_CMD_SEND_MESSAGE */

#define IPMI_COMP_CODE_SEND_MESSAGE_INVALID_SESSION_HANDLE                                                            0x80
#define IPMI_COMP_CODE_SEND_MESSAGE_INVALID_SESSION_HANDLE_STR \
  "Invalid Session Handle.  The session handle does not match up with any " \
  "currently active sessions for this channel."

#define IPMI_COMP_CODE_SEND_MESSAGE_LOST_ARBITRATION                                                                  0x81
#define IPMI_COMP_CODE_SEND_MESSAGE_LOST_ARBITRATION_STR \
  "Lost Arbitration"

#define IPMI_COMP_CODE_SEND_MESSAGE_BUS_ERROR                                                                         0x82
#define IPMI_COMP_CODE_SEND_MESSAGE_BUS_ERROR_STR \
  "Bus Error"

#define IPMI_COMP_CODE_SEND_MESSAGE_NAK_ON_WRITE                                                                      0x83
#define IPMI_COMP_CODE_SEND_MESSAGE_NAK_ON_WRITE_STR \
  "NAK on Write"

/* IPMI_CMD_MASTER_WRITE_READ */

#define IPMI_COMP_CODE_MASTER_WRITE_READ_LOST_ARBITRATION                                                             0x81
#define IPMI_COMP_CODE_MASTER_WRITE_READ_LOST_ARBITRATION_STR \
  "Lost Arbitration"

#define IPMI_COMP_CODE_MASTER_WRITE_READ_BUS_ERROR                                                                    0x82
#define IPMI_COMP_CODE_MASTER_WRITE_READ_BUS_ERROR_STR \
  "Bus Error"

#define IPMI_COMP_CODE_MASTER_WRITE_READ_NAK_ON_WRITE                                                                 0x83
#define IPMI_COMP_CODE_MASTER_WRITE_READ_NAK_ON_WRITE_STR \
  "NAK on Write"

#define IPMI_COMP_CODE_MASTER_WRITE_READ_TRUNCATED_READ                                                               0x84
#define IPMI_COMP_CODE_MASTER_WRITE_READ_TRUNCATED_READ_STR \
  "Truncated Read"

/* IPMI_CMD_SET_SYSTEM_INFO_PARAMETERS */

#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED                                             0x80
#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_INVALID_SET_IN_PROGRESS                                             0x81
#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \
  "attempt to set the 'set in progress' value (in parameter #0) " \
  "when not int the 'set complete' state."

#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_WRITE_READ_ONLY_PARAMETER                                           0x82
#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \
  "attempt to write read-only parameter"

#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_READ_WRITE_ONLY_PARAMETER                                           0x83
#define IPMI_COMP_CODE_SET_SYSTEM_INFO_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \
  "attempt to read write-only parameter"

/* IPMI_CMD_GET_SYSTEM_INFO_PARAMETERS */

#define IPMI_COMP_CODE_GET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED                                             0x80
#define IPMI_COMP_CODE_GET_SYSTEM_INFO_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

/* IPMI_CMD_GET_SESSION_CHALLENGE */

#define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_INVALID_USERNAME                                                         0x81
#define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_INVALID_USERNAME_STR \
  "Invalid user name"

#define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_NULL_USERNAME_NOT_ENABLED                                                0x82
#define IPMI_COMP_CODE_GET_SESSION_CHALLENGE_NULL_USERNAME_NOT_ENABLED_STR \
  "Null user name (User 1) not enabled"

/* IPMI_CMD_ACTIVATE_SESSION */

#define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SESSION_SLOT_AVAILABLE                                                     0x81
#define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SESSION_SLOT_AVAILABLE_STR \
  "No session slot available (BMC cannot accept any more sessions)"

#define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILABLE_FOR_GIVEN_USER                                              0x82
#define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILABLE_FOR_GIVEN_USER_STR \
  "No slot available for given user. (Limit of user sessions " \
  "allowed under that name has been reached)"

#define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILABLE_TO_SUPPORT_USER                                             0x83
#define IPMI_COMP_CODE_ACTIVATE_SESSION_NO_SLOT_AVAILALBE_TO_SUPPORT_USER_STR \
  "No slot available to support user due to maximum privilege " \
  "capability. (An implementation may only be able to support " \
  "a certain number of sessions based on what authentication " \
  "resources are required. For example, if User Level " \
  "Authentication is disabled, an implementation may be able " \
  "to allow a larger number of users that are limited to User " \
  "Level privilege, than users that require higher privilege."

#define IPMI_COMP_CODE_ACTIVATE_SESSION_SESSION_SEQ_NUM_OUT_OF_RANGE                                                  0x84
#define IPMI_COMP_CODE_ACTIVATE_SESSION_SESSION_SEQ_NUM_OUT_OF_RANGE_STR \
  "Session sequence number out-of-range"

#define IPMI_COMP_CODE_ACTIVATE_SESSION_INVALID_SESSION_ID                                                            0x85
#define IPMI_COMP_CODE_ACTIVATE_SESSION_INVALID_SESSION_ID_STR \
  "Invalid session ID in request"

#define IPMI_COMP_CODE_ACTIVATE_SESSION_EXCEEDS_PRIVILEGE_LEVEL                                                       0x86
#define IPMI_COMP_CODE_ACTIVATE_SESSION_EXCEEDS_PRIVILEGE_LEVEL_STR \
  "Requested maximum privilege level exceeds user and/or " \
  "channel privilege limit"

/* IPMI_CMD_SET_SESSION_PRIVILEGE_LEVEL */

#define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_NOT_AVAILABLE_FOR_USER                             0x81
#define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_NOT_AVAILABLE_FOR_USER_STR \
  "Requested level not available for this user"

#define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_EXCEEDS_USER_PRIVILEGE_LIMIT                       0x82
#define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_REQUESTED_LEVEL_EXCEEDS_USER_PRIVILEGE_LIMIT_STR \
  "Requested level exceeds Channel and/or User Privilege Limit"

#define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_CANNOT_DISABLE_USER_LEVEL_AUTHENTICATION                           0x83
#define IPMI_COMP_CODE_SET_SESSION_PRIVILEGE_LEVEL_CANNOT_DISABLE_USER_LEVEL_AUTHENTICATION_STR \
  "Cannot disable User Level authentication"

/* IPMI_CMD_CLOSE_SESSION */

#define IPMI_COMP_CODE_CLOSE_SESSION_INVALID_SESSION_ID_IN_REQUEST                                                    0x87
#define IPMI_COMP_CODE_CLOSE_SESSION_INVALID_SESSION_ID_IN_REQUEST_STR \
  "Invalid session ID in request"

/* IPMI_CMD_SET_CHANNEL_ACCESS */
#define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_SET_NOT_SUPPORTED_ON_SELECTED_CHANNEL                                       0x82
#define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_SET_NOT_SUPPORTED_ON_SELECTED_CHANNEL_STR \
  "set not supported on selected channel"

#define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_ACCESS_MODE_NOT_SUPPORTED                                                   0x83
#define IPMI_COMP_CODE_SET_CHANNEL_ACCESS_ACCESS_MODE_NOT_SUPPORTED_STR \
  "access mode not supported"

/* IPMI_CMD_GET_CHANNEL_ACCESS */
#define IPMI_COMP_CODE_GET_CHANNEL_ACCESS_COMMAND_NOT_SUPPORTED_FOR_SELECTED_CHANNEL                                  0x82
#define IPMI_COMP_CODE_GET_CHANNEL_ACCESS_COMMAND_NOT_SUPPORTED_FOR_SELECTED_CHANNEL_STR \
  "command not supported for selected channel"

/* IPMI_CMD_SET_USER_PASSWORD_COMMAND */
#define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_CORRECT                           0x80
#define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_CORRECT_STR \
  "password test failed.  Password size correct, but password " \
  "data does not match stored value."

#define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_INCORRECT                         0x81
#define IPMI_COMP_CODE_SET_USER_PASSWORD_COMMAND_PASSWORD_TEST_FAILED_PASSWORD_SIZE_INCORRECT_STR \
  "password test failed.  Wrong password size was used."

/* IPMI_CMD_ACTIVATE_PAYLOAD */
#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ALREADY_ACTIVE_ON_ANOTHER_SESSION                                     0x80
#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ALREADY_ACTIVE_ON_ANOTHER_SESSION_STR \
  "Payload already active on another session"

#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED                                                      0x81
#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED_STR \
  "Payload type disabled.  Given payload type is not configured " \
  "to be enabled for activation."

#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ACTIVATION_LIMIT_REACHED                                              0x82
#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_PAYLOAD_ACTIVATION_LIMIT_REACHED_STR \
  "Payload activation limit reached.  Cannot activate given payload type " \
  "because the maximum number of simultaneous instances of that payload type " \
  "are already running."

#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITH_ENCRYPTION                                       0x83
#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITH_ENCRYPTION_STR \
  "Cannot activate payload with encryption."

#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITHOUT_ENCRYPTION                                    0x84
#define IPMI_COMP_CODE_ACTIVATE_PAYLOAD_CANNOT_ACTIVATE_PAYLOAD_WITHOUT_ENCRYPTION_STR \
  "Cannot activate payload without encryption.  BMC requires encryption " \
  "for all payloads for given privilege level."

/* IPMI_CMD_DEACTIVATE_PAYLOAD */
#define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_ALREADY_DEACTIVATED                                                 0x80
#define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_ALREADY_DEACTIVATED_STR \
  "Payload already deactivated"

#define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED                                                    0x81
#define IPMI_COMP_CODE_DEACTIVATE_PAYLOAD_PAYLOAD_TYPE_IS_DISABLED_STR \
  "Payload type disabled.  Given payload type is not configured " \
  "to be enabled for activation."

/* IPMI_CMD_GET_CHANNEL_PAYLOAD_VERSION */
#define IPMI_COMP_CODE_GET_CHANNEL_PAYLOAD_VERSION_PAYLOAD_TYPE_NOT_AVAILABLE_ON_GIVEN_CHANNEL                        0x80
#define IPMI_COMP_CODE_GET_CHANNEL_PAYLOAD_VERSION_PAYLOAD_TYPE_NOT_AVAILABLE_ON_GIVEN_CHANNEL_STR \
  "Payload type not available on given channel"

/* IPMI_CMD_GET_CHANNEL_OEM_PAYLOAD_INFO */
#define IPMI_COMP_CODE_GET_CHANNEL_OEM_PAYLOAD_INFO_OEM_PAYLOAD_IANA_OR_PAYLOAD_ID_NOT_SUPPORTED                      0x80
#define IPMI_COMP_CODE_GET_CHANNEL_OEM_PAYLOAD_INFO_OEM_PAYLOAD_IANA_OR_PAYLOAD_ID_NOT_SUPPORTED_STR \
  "OEM Payload IANA and/or Payload ID not supported"

/* IPMI_CMD_SUSPEND_RESUME_PAYLOAD_ENCRYPTION */
#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_SUPPORTED                                      0x80
#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_SUPPORTED_STR \
  "Operation not supported for given payload type."

#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_ALLOWED_UNDER_PRESENT_CONFIGURATION            0x81
#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_OPERATION_NOT_ALLOWED_UNDER_PRESENT_CONFIGURATION_STR \
  "Operation now allowed under present configuration for given payload type."

#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_ENCRYPTION_IS_NOT_AVAILABLE_FOR_SESSION                      0x82
#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_ENCRYPTION_IS_NOT_AVAILABLE_FOR_SESSION_STR \
  "Encryption is not available for session that payload type is active under."

#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_PAYLOAD_INSTANCE_NOT_PRESENTLY_ACTIVE                        0x83
#define IPMI_COMP_CODE_SUSPEND_RESUME_PAYLOAD_ENCRYPTION_PAYLOAD_INSTANCE_NOT_PRESENTLY_ACTIVE_STR \
  "The payload instance is not presently active."

/* IPMI_CMD_SET_CHANNEL_SECURITY_KEYS */
#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_CANNOT_PERFORM_SET_CONFIRM_KEY_IS_LOCKED                             0x80
#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_CANNOT_PERFORM_SET_CONFIRM_KEY_IS_LOCKED_STR \
  "Cannot perform set/confirm.  Key is locked"

#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_INSUFFICIENT_KEY_BYTES                                               0x81
#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_INSUFFICIENT_KEY_BYTES_STR \
  "insufficient key bytes"

#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_TOO_MANY_KEY_BYTES                                                   0x82
#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_TOO_MANY_KEY_BYTES_STR \
  "too many key bytes"

#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KEY_VALUE_DOES_NOT_MEET_CRITERIA                                     0x83
#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KEY_VALUE_DOES_NOT_MEET_CRITERIA_STR \
  "key value does not meet criteria for specified type of key"

#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KR_IS_NOT_USED                                                       0x84
#define IPMI_COMP_CODE_SET_CHANNEL_SECURITY_KEYS_KR_IS_NOT_USED_STR \
  "K_R is not used.  BMC uses a random number generation approach " \
  "that does not require a K_R value"

/*
 * Chassis Device Commands
 */

/* IPMI_CMD_SET_SYSTEM_BOOT_OPTIONS */

#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED                                                       0x80
#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_INVALID_SET_IN_PROGRESS                                                       0x81
#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_INVALID_SET_IN_PROGRESS_STR \
  "attempt to set the 'set in progress' value (in parameter #0) " \
  "when not int the 'set complete' state."

#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_WRITE_READ_ONLY_PARAMETER                                                     0x82
#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_WRITE_READ_ONLY_PARAMETER_STR \
  "attempt to write read-only parameter"

#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_READ_WRITE_ONLY_PARAMETER                                                     0x83
#define IPMI_COMP_CODE_SET_BOOT_OPTIONS_READ_WRITE_ONLY_PARAMETER_STR \
  "attempt to read write-only parameter"

/* IPMI_CMD_GET_SYSTEM_BOOT_OPTIONS */

#define IPMI_COMP_CODE_GET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED                                                       0x80
#define IPMI_COMP_CODE_GET_BOOT_OPTIONS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

/*
 * Event Commands
 */

/*
 * PEF and Alerting Commands
 */

/* IPMI_CMD_SET_PEF_CONFIGURATION_PARAMETERS */

#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED                                       0x80
#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS                                       0x81
#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \
  "attempt to set the 'set in progress' value (in parameter #0) " \
  "when not int the 'set complete' state."

#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER                                     0x82
#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \
  "attempt to write read-only parameter"

#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER                                     0x83
#define IPMI_COMP_CODE_SET_PEF_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \
  "attempt to read write-only parameter"

/* IPMI_CMD_GET_PEF_CONFIGURATION_PARAMETERS */

#define IPMI_COMP_CODE_GET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED                                       0x80
#define IPMI_COMP_CODE_GET_PEF_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

/* IPMI_CMD_SET_LAST_PROCESSED_EVENT_ID */
#define IPMI_COMP_CODE_SET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS                                              0x81
#define IPMI_COMP_CODE_SET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS_STR \
  "cannot execute command, SEL erase in progress"

/* IPMI_CMD_GET_LAST_PROCESSED_EVENT_ID */
#define IPMI_COMP_CODE_GET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS                                              0x81
#define IPMI_COMP_CODE_GET_LAST_PROCESSED_EVENT_ID_SEL_ERASE_IN_PROGRESS_STR \
  "cannot execute command, SEL erase in progress"

/* IPMI_CMD_ALERT_IMMEDIATE */
#define IPMI_COMP_CODE_ALERT_ALREADY_IN_PROGRESS                                                                      0x81
#define IPMI_COMP_CODE_ALERT_ALREADY_IN_PROGRESS_STR \
  "Alert Immediate rejected due to alert already in progress"

#define IPMI_COMP_CODE_ALERT_IPMI_MESSAGING_SESSION_ACTIVE                                                            0x82
#define IPMI_COMP_CODE_ALERT_IPMI_MESSAGING_SESSION_ACTIVE_STR \
  "Alert Immedate rejected due to IPMI messaging session active on this channel"

/*
 * Sensor Device Commands
 */
/* IPMI_CMD_SET_SENSOR_READING_AND_EVENT_STATUS */
#define IPMI_COMP_CODE_SENSOR_READING_OR_STATUS_NOT_SETTABLE                                                          0x80
#define IPMI_COMP_CODE_SENSOR_READING_OR_STATUS_NOT_SETTABLE_STR \
  "Attempt to change reading or set or clear status bits that " \
  "are not settable via this command"

#define IPMI_COMP_CODE_EVENT_DATA_BYTES_NOT_SETTABLE                                                                  0x81
#define IPMI_COMP_CODE_EVENT_DATA_BYTES_NOT_SETTABLE_STR \
  "Attempted to set Event Data Bytes, but setting Event Data Bytes is not " \
  "supported for this sensor."

/*
 * FRU Device Commands
 */

/* IPMI_CMD_READ_FRU_DATA */
#define IPMI_COMP_CODE_READ_FRU_DATA_FRU_DEVICE_BUSY                                                                 0x81
#define IPMI_COMP_CODE_READ_FRU_DATA_FRU_DEVICE_BUSY_STR \
  "FRU device busy. The requested cannot be completed because the " \
  "implementation of the logical FRU device is in a state where the FRU " \
  "information is temporarily unavailable.  This could be due to a " \
  "condition such as a loss of arbitration if the FRU is implemented as a " \
  "device on a shared bus."

/* IPMI_CMD_WRITE_FRU_DATA */
#define IPMI_COMP_CODE_WRITE_FRU_DATA_WRITE_PROTECTED_OFFSET                                                          0x80
#define IPMI_COMP_CODE_WRITE_FRU_DATA_WRITE_PROTECTED_OFFSET_STR \
  "write-protected offset. Cannot complete write because one or more " \
  "bytes of FRU data are to a write-protected offset in the FRU device. " \
  "Note that an implementation may have allowed a 'partial write' of the " \
  "data to occur."

#define IPMI_COMP_CODE_WRITE_FRU_DATA_FRU_DEVICE_BUSY                                                                 0x81
#define IPMI_COMP_CODE_WRITE_FRU_DATA_FRU_DEVICE_BUSY_STR \
  "FRU device busy. The requested cannot be completed because the " \
  "implementation of the logical FRU device is in a state where the FRU " \
  "information is temporarily unavailable.  This could be due to a " \
  "condition such as a loss of arbitration if the FRU is implemented as a " \
  "device on a shared bus."

/*
 * SDR Device Commands
 */

/*
 * SEL Device Commands
 */

/* IPMI_CMD_GET_SEL_ENTRY */
#define IPMI_COMP_CODE_GET_SEL_ENTRY_SEL_ERASE_IN_PROGRESS                                                            0x81
#define IPMI_COMP_CODE_GET_SEL_ENTRY_SEL_ERASE_IN_PROGRESS_STR \
  "cannot execute command, SEL erase in progress"

/* IPMI_CMD_DELETE_SEL_ENTRY */
#define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_OPERATION_NOT_SUPPORTED                                                   0x80
#define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_OPERATION_NOT_SUPPORTED_STR \
  "Operation not supported for this Record Type"

#define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_ERASE_IN_PROGRESS                                                         0x81
#define IPMI_COMP_CODE_DELETE_SEL_ENTRY_SEL_ERASE_IN_PROGRESS_STR \
  "cannot execute command, SEL erase in progress"

/*
 * LAN Device Commands
 */

/* IPMI_CMD_SET_LAN_CONFIGURATION_PARAMETERS */

#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED                                       0x80
#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS                                       0x81
#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \
  "attempt to set the 'set in progress' value (in parameter #0) " \
  "when not int the 'set complete' state."

#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER                                     0x82
#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \
  "attempt to write read-only parameter"

#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER                                     0x83
#define IPMI_COMP_CODE_SET_LAN_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \
  "attempt to read write-only parameter"

/* IPMI_CMD_GET_LAN_CONFIGURATION_PARAMETERS */

#define IPMI_COMP_CODE_GET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED                                       0x80
#define IPMI_COMP_CODE_GET_LAN_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

/*
 * Serial/Modem Device Commands
 */

/* IPMI_CMD_SET_SERIAL_MODEM_CONFIGURATION */
#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED                                         0x80
#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_INVALID_SET_IN_PROGRESS                                         0x81
#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_INVALID_SET_IN_PROGRESS_STR \
  "attempt to set the 'set in progress' value (in parameter #0) " \
  "when not int the 'set complete' state."

#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_WRITE_READ_ONLY_PARAMETER                                       0x82
#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_WRITE_READ_ONLY_PARAMETER_STR \
  "attempt to write read-only parameter"

#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_READ_WRITE_ONLY_PARAMETER                                       0x83
#define IPMI_COMP_CODE_SET_SERIAL_MODEM_CONFIGURATION_READ_WRITE_ONLY_PARAMETER_STR \
  "attempt to read write-only parameter"

/* IPMI_CMD_GET_SERIAL_MODEM_CONFIGURATION */
#define IPMI_COMP_CODE_GET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED                                         0x80
#define IPMI_COMP_CODE_GET_SERIAL_MODEM_CONFIGURATION_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

/* IPMI_CMD_SET_SOL_CONFIGURATION_PARAMETERS */

#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED                                       0x80
#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS                                       0x81
#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_INVALID_SET_IN_PROGRESS_STR \
  "attempt to set the 'set in progress' value (in parameter #0) " \
  "when not int the 'set complete' state."

#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER                                     0x82
#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_WRITE_READ_ONLY_PARAMETER_STR \
  "attempt to write read-only parameter"

#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER                                     0x83
#define IPMI_COMP_CODE_SET_SOL_CONFIGURATION_PARAMETERS_READ_WRITE_ONLY_PARAMETER_STR \
  "attempt to read write-only parameter"

/* IPMI_CMD_GET_SOL_CONFIGURATION_PARAMETERS */

#define IPMI_COMP_CODE_GET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED                                       0x80
#define IPMI_COMP_CODE_GET_SOL_CONFIGURATION_PARAMETERS_PARAMETER_NOT_SUPPORTED_STR \
  "parameter not supported."

/*
 * Bridge Management Commands (ICMB)
 */

/*
 * Discovery Commands (ICMB)
 */

/*
 * Bridging Commands (ICMB)
 */

/*
 * Event Commands (ICMB)
 */

/*
 * OEM Commands for Bridge NetFN
 */

/*
 * OEM Bridge Commands
 */

#define IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MIN 0xC0
#define IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MAX 0xFF

#define IPMI_COMP_CODE_GENERIC_COMPLETION_CODES(__comp_code) \
  (((__comp_code) == IPMI_COMP_CODE_COMMAND_SUCCESS \
    || ((__comp_code) >= IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MIN \
	&& (__comp_code) <= IPMI_COMP_CODE_GENERIC_COMPLETION_CODES_MAX)) ? 1 : 0)

#define IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MIN 0x01
#define IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MAX 0x7E

#define IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES(__comp_code) \
  (((__comp_code) >= IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MIN \
    && (__comp_code) <= IPMI_COMP_CODE_DEVICE_SPECIFIC_CODES_MAX) ? 1 : 0)

#define IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MIN 0x80
#define IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MAX 0xBE

#define IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES(__comp_code) \
  (((__comp_code) >= IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MIN \
    && (__comp_code) <= IPMI_COMP_CODE_COMMAND_SPECIFIC_CODES_MAX) ? 1 : 0)

#ifdef __cplusplus
}
#endif

#endif /* IPMI_COMP_CODE_SPEC_H */