/usr/bin/tv_grab_fi

#!/usr/bin/perl -w

=pod

=head1 NAME

tv_grab_fi_sv - Grab TV listings for Finland in Swedish.

=head1 SYNOPSIS

tv_grab_fi_sv --help
	
tv_grab_fi_sv --version

tv_grab_fi_sv --capabilities

tv_grab_fi_sv --description

tv_grab_fi_sv [--config-file FILE]
              [--days N] [--offset N]
              [--output FILE] [--quiet] [--debug]

tv_grab_fi_sv --configure [--config-file FILE]

tv_grab_fi_sv --configure-api [--stage NAME]
              [--config-file FILE] [--output FILE]

tv_grab_fi_sv --list-channels [--config-file FILE]
              [--output FILE] [--quiet] [--debug]

=head1 DESCRIPTION

Retrieves and displays TV listings for the Finnish YLE channels plus some of
the most popular commercial channels. The data comes from www.yle.fi and the
Swedish listings are retrieved rather than the Finnish. Just like tv_grab_fi,
this grabber relies on parsing HTML so it could very well stop working at any
time. You have been warned.

=head1 OPTIONS

B<--help> Print a help message and exit.

B<--version> Show the versions of the XMLTV libraries, the grabber and of
key modules used for processing listings.

B<--capabilities> Show which capabilities the grabber supports. For more
information, see L<http://xmltv.org/wiki/xmltvcapabilities.html>

B<--description> Show a brief description of the grabber.

B<--config-file FILE> Specify the name of the configuration file to use.
If not specified, a default of B<~/.xmltv/tv_grab_fi_sv.conf> is used.  This
is the file written by B<--configure> and read when grabbing.

B<--output FILE> When grabbing, write output to FILE rather than to standard
output.

B<--days N> When grabbing, grab N days of data instead of all available.
Supported values are 1-14.

B<--offset N> Start grabbing at today + N days. Supported values are 0-13.

=head1 SEE ALSO

L<xmltv(5)>.

=head1 AUTHOR

Per Lundberg, (perlun at gmail dot com). Inspired/based on other grabbers,
like tv_grab_uk_rt, tv_grab_se_swedb and tv_grab_fi.

=cut

my $_version = '$Id: tv_grab_fi_sv,v 1.17 2015/06/20 11:28:15 bilbo_uk Exp $';
		 
use strict;

use DateTime;
use IO::Scalar;
#use LWP::UserAgent;
#use XML::LibXML;
use HTML::TreeBuilder;
use XMLTV::Ask qw/say/;
use XMLTV::Configure::Writer;
use XMLTV::Options qw/ParseOptions/;
use XMLTV::Get_nice 0.005066;
use XMLTV::Memoize;
use Encode;

sub t;

# Constants.
# my $DATA_SITE_ROOT  = 'http://svenska.yle.fi/programguide/';
my $DATA_SITE_ROOT  = 'http://ohjelmaopas.yle.fi/';
my $GRABBER_NAME    = 'tv_grab_fi_sv';
(my $GRABBER_VERSION) = $_version =~ qr/$GRABBER_NAME,v ([\d\.]*) /;
my $XML_ENCODING    = 'iso-8859-1';
my $LANGUAGE_CODE   = 'sv';

# This is not the timezone for the machine on which the grabber is
# being run, but rather the timezone in which all the grabbed data is
# being specified.
my $TIMEZONE = 'Europe/Helsinki';

# Attributes of the root element in output.
my $xmltv_attributes =
{
     'source-info-url'     => 'http://www.yle.fi/',
     'source-data-url'     => "$DATA_SITE_ROOT/",
     'generator-info-name' => "XMLTV/$XMLTV::VERSION, $GRABBER_NAME $GRABBER_VERSION",
     'generator-info-url'  => 'http://www.xmltv.org',
};

# Set up LWP::UserAgent
# my $ua = LWP::UserAgent->new;
# $ua->agent("xmltv/$XMLTV::VERSION");

# Get options, including undocumented --cache option.
XMLTV::Memoize::check_argv('XMLTV::Get_nice::get_nice_aux');

# The list of channels available from the Yle Program Guide. Their
# names are deliberately specified in a manner which would be natural
# for people watching e.g. TV channels from Sweden (so that "TV1"
# would in their mindset not necessarily refer to Yle's TV1 channel -
# thus, the reason behind the "Yle" prefixing here).
#
# The key in this hash is the name of the channel as given on the Yle
# program guide web page.
my $channels =
{
   'tv1.yle.fi' => {
		    'id' => 'tv1.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'YLE TV1', $LANGUAGE_CODE ]]
	    },
   'tv2.yle.fi' => {
		    'id' => 'tv2.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'YLE TV2', $LANGUAGE_CODE ]]
	    },
   'fem.yle.fi' => {
		    'id' => 'fem.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'YLE Fem', $LANGUAGE_CODE ]]
	    },
   'teema.yle.fi' => {
		    'id' => 'teema.yle.fi',                   
		    'group' => 3,
		    'display-name' => [[ 'YLE Teema', $LANGUAGE_CODE ]]
	    },
   'elava-arkisto.yle.fi' => {
		    'id' => 'elava-arkisto.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'Elava Arkisto', $LANGUAGE_CODE ]]
	    },
   'areena.yle.fi' => {
		    'id' => 'areena.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'Areena', $LANGUAGE_CODE ]]
	    },
   'mtv3.yle.fi' => {
		    'id' => 'mtv3.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'MTV3', $LANGUAGE_CODE ]]
	     },
   'nelonen.yle.fi' => {
		    'id' => 'nelonen.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'Nelonen', $LANGUAGE_CODE ]]
	     },
   'subtv.yle.fi' => {
                    'id' => 'subtv.yle.fi',
                    'group' => 3,
                    'display-name' => [[ 'Subtv', $LANGUAGE_CODE ]]
	     },
   'liv.yle.fi' => {
		    'id' => 'liv.yle.fi',
		    'group' => 3,
		    'display-name' => [[ 'LIV', $LANGUAGE_CODE ]]
	    },
   'jim.yle.fi' => {
                    'id' => 'jim.yle.fi',
                    'group' => 3,
                    'display-name' => [[ 'JIM', $LANGUAGE_CODE ]]
	     },
   'ava.yle.fi' => {
		    'id' => 'ava.yle.fi',
                    'group' => 3,
		    'display-name' => [[ 'AVA', $LANGUAGE_CODE ]]
	    },
};

# Map between channel names (as presented by the YLE data) and channel
# IDs, as create by us.

my $channel_name_map =			# deprecated
{
   'TV1' => 'tv1.yle.fi',
   'TV2' => 'tv2.yle.fi',
   'MTV3' => 'mtv3.yle.fi',
   'Nelonen' => 'nelonen.yle.fi',
   'YLE Teema' => 'teema.yle.fi',
   'FST5' => 'fst5.yle.fi',
   'Subtv' => 'subtv.yle.fi',
   'JIM' => 'jim.yle.fi',

   # See note above about this one.
   'Urheilukanava' => 'nelonen.sport.yle.fi'
};
my $channel_id_map =
{
   'yle-tv1' => 'tv1.yle.fi',
   'yle-tv2' => 'tv2.yle.fi',
   'yle-fem' => 'fem.yle.fi',
   'yle-teema' => 'teema.yle.fi',
   'yle-areena' => 'areena.yle.fi',
   'yle-elava-arkisto' => 'elava-arkisto.yle.fi',
   'MTV3' => 'mtv3.yle.fi',
   'Nelonen' => 'nelonen.yle.fi',
   'SUB' => 'subtv.yle.fi',
   'Liv' => 'liv.yle.fi',
   'Jim' => 'jim.yle.fi',
   'AVA' => 'ava.yle.fi',
	 'tv-finland' => 'tvfinland.yle.fi',
};

my @ARGUMENTS = @ARGV;

# Parse the standard XMLTV grabber options, using the XMLTV module.
my ($opt, $conf) = ParseOptions(
{
     grabber_name => "tv_grab_fi_sv",
     capabilities => [qw/baseline manualconfig apiconfig/],
     stage_sub => \&config_stage,
     listchannels_sub => \&list_channels,
     version => $_version,
     description => "Finland (Swedish)",
});

t("Command line arguments: " . join(' ', @ARGUMENTS));

# When we get here, we know that we are invoked in such a way that the
# channel data should be grabbed.

# Configure the output and write the XMLTV data - header, channels,
# listings, and footer
my $writer;
setup_xmltv_writer();
write_xmltv_header();
write_channel_list(@{ $conf->{channel} });
write_listings_data(@{ $conf->{channel} });
write_xmltv_footer();

# For the moment, we always claim that we've exited successfully...
exit 0;

sub t
{
    my $message = shift;
    print STDERR $message . "\n" if $opt->{debug};
}

sub config_stage
{
     my($stage, $conf) = shift;

     die "Unknown stage $stage" if $stage ne "start";

     # This grabber doesn't need any configuration (except for
     # possibly channel, selection), so this subroutine doesn't need
     # to do very much at all.
     my $result;
     my $writer = new XMLTV::Configure::Writer(OUTPUT => \$result,
                                               encoding => $XML_ENCODING);
     $writer->start({ grabber => 'tv_grab_fi_sv' });
     $writer->end('select-channels');

     return $result;
}

# Returns a string containing an xml-document with <channel>-elements
# for all available channels.
sub list_channels
{
     my ($conf, $opt) = shift;

     my $result = '';
     my $fh = new IO::Scalar \$result;
     my $oldfh = select($fh);

     # Create an XMLTV::Writer object. The important part here is that
     # the output should go to $fh (in other words, to the $result
     # string), NOT to stdout...
     my %writer_args =
     (
          encoding => $XML_ENCODING,
          OUTPUT => $fh
     );

    my $writer = new XMLTV::Writer(%writer_args);
    $writer->start($xmltv_attributes); 

    # Loop over all channels and write them to this XMLTV::Writer.
    foreach my $channel_id (keys %{ $channels })
    {
	# We must remove our proprietary hash key here, otherwise
	# the XMLTV module will bark at us...
	my $channel = $channels->{$channel_id};
	delete($channel->{group});
	
        $writer->write_channel($channel);
    }

    $writer->end;

    select($oldfh);
    $fh->close();

    return $result;
}

# Determine options for XMLTV::Writer, and instantiate it.

sub setup_xmltv_writer
{
    # output options
    my %g_args = ();
    if (defined $opt->{output})
    {
        t("\nOpening XML output file '$opt->{output}'\n");
        my $fh = new IO::File ">$opt->{output}";
        die "Error: Cannot write to '$opt->{output}', exiting" if (!$fh);
        %g_args = (OUTPUT => $fh);
    }

    # Determine how many days of listings are required and
    # range-check, applying default values if necessary. If --days or
    # --offset is specified we must ensure that the values for days,
    # offset and cutoff are passed to XMLTV::Writer.
    my %d_args = ();
    if (defined $opt->{days} || defined $opt->{offset})
    {
        if (defined $opt->{days})
        {
            if ($opt->{days} < 1 || $opt->{days} > 14)
            {
                if (!$opt->{quiet})
                {
                    say("Specified --days option is not possible (1-14). " .
                        "Retrieving all available listings.");
                }
                $opt->{days} = 14
            }
        }
        else
        {
            # No --days parameter were given. Use the default.
            $opt->{days} = 14;
        }

        if (defined $opt->{offset})
        {
            if ($opt->{offset} < 0 || $opt->{offset} > 13)
            {
                if (!$opt->{quiet})
                {
                    say("Specified --offset option is not possible (0-13). "
                      . "Retrieving all available listings.");
                }
                $opt->{offset} = 0;
            }
        }
        else
        {
            $opt->{offset} = 0;
        }
    }

    t("Setting up XMLTV::Writer using \"" . $XML_ENCODING . "\" for output");
    $writer = new XMLTV::Writer(%g_args, %d_args, encoding => $XML_ENCODING);
}

# Writes the XMLTV header.
sub write_xmltv_header
{
    t("Writing XMLTV header");
    $writer->start($xmltv_attributes);
}

# Writes the channel list (of all configured channels).
sub write_channel_list
{
    my (@channels) = @_;

    t("Started writing <channel> elements");
    foreach my $channel_id (@channels)
    {
	# We must remove our proprietary hash key here, otherwise the
	# XMLTV module will bark at us...
	my $channel = $channels->{$channel_id};
	my $group = $channel->{group};
	delete($channel->{group});
	
        $writer->write_channel($channel);

        # Put it back, since we'll need it later.
        $channel->{group} = $group;
    }
    t("Finished writing <channel> elements");
}

# Download listings data for all the configured channels
sub write_listings_data
{
    my (@channels) = @_;

		my $programmes = {};

    say(scalar @channels ." configured channels")  if !$opt->{quiet};

		# 2014-04-13 channel groups are deprecated

    my $channel_groups = {};
    # create hash of wanted channels
    my %wanted;
    @wanted{ @channels } = ();

    foreach my $channel (@channels)
    {
	# Get the channel group for this channel and check if the group has already
	# been fetched.
	my $channel_group = $channels->{$channel}->{group};
	
	if (defined($channel_groups->{$channel_group}))
	{
	    # Group has been fetched already - ignoring it.
	    next;
	}

	# Mark the group as fetched.
	$channel_groups->{$channel_group} = 1;

	my $today = DateTime->today( time_zone => $TIMEZONE );

        if (!$opt->{quiet})
        {
          # say("Downloading data for channel group $channel_group");
        }

				# Get start & stop times for the grab
				my $t = $today->clone->add( days => $opt->{offset} );
				my $grab_start = $t->epoch() + $t->offset();
				$t = $t->add( days => $opt->{days} );
				my $grab_end =  $t->epoch() + $t->offset();
				undef $t;
								
								
				# schedules run from 06:00-06:00 so to pass tv_validate_file we need to get the day before also
				
        for (my $i = $opt->{offset} - 1; $i < $opt->{offset} + $opt->{days}; $i++)
        {
            # Create the URL for the schedules for this
            # channel/month/day combination.
            my $date = $today->clone->add( days => $i );

            # broken:   my $url = sprintf("%s?g=%s&d=%s", $DATA_SITE_ROOT, $channel_group, $date->strftime( '%Y%m%d' ));

            my $url = sprintf('%stv/guide?t=%s', $DATA_SITE_ROOT, $date->strftime( '%Y-%m-%d' ));  # e.g. http://ohjelmaopas.yle.fi/tv/guide?t=2014-04-14

            say("Downloading $url")  if $opt->{debug};

            # Get the HTML from the created URL.
            # my $response = $ua->get($url);
            # my $file_contents = $response->decoded_content;
						# ^^ change to use Get_nice
						#
						$XMLTV::Get_nice::IncludeUnknownTags = 1;
            my $tree  = get_nice_tree($url,'','UTF-8');
						#$tree->dump; exit;
            
						next if !$tree;
						my $t_guide = $tree->look_down('_tag' => 'section', 'class' => qr/guide/);
						next if !$t_guide;
						my $t_chanlists = $t_guide->look_down('_tag' => 'ul', 'class' => qr/channel-lists/);
						next if !$t_chanlists;
						my @t_channels = $t_chanlists->look_down('_tag' => 'li', sub {$_[0]->parent() == $t_chanlists} );
						say 'Found '.scalar @t_channels.' channels' if $opt->{debug};
						next if scalar @t_channels == 0;

						for (my $j = 0; $j < scalar @t_channels; $j++) {	# can't use foreach because of clumpidx processing
							my $t_channel = $t_channels[$j];

							my $chan_id = $t_channel->look_down('_tag' => 'h1')->attr('id');
							my $c_chan_name = $t_channel->look_down('_tag' => 'h1')->as_text();

							# Check if this program belongs to one of the
							# configured channels.  If it doesn't, ignore it. 
							say "Found $chan_id" if $opt->{debug};
							my $c_channel_id = $channel_id_map->{$chan_id};
							say "UNKNOWN CHANNEL ID $chan_id" if $opt->{debug} && !$c_channel_id;
							next unless( $c_channel_id && exists( $wanted{ $c_channel_id } ) );
							say "Processing $c_channel_id" if $opt->{debug};


							my $t_schedule = $t_channel->look_down('_tag' => 'ul', 'class' => qr/selected/);
							my @t_progs = $t_schedule->look_down('_tag' => 'li', 'class' => qr/program-entry/);
							
							foreach my $t_prog (@t_progs) {
							  my ($t_prog_label, $t_prog_desc, $t_prog_link, $t_prog_title, $t_prog_film);
								my ($p_dtstart, $p_dtend, $p_title, $p_subtitle, $p_desc, $p_url, $p_category);
								
								$t_prog_label = $t_prog->look_down('_tag' => 'div', 'class' => qr/program-label/);
								$t_prog_desc = $t_prog->look_down('_tag' => 'div', 'class' => qr/program-desc/);
								
								
								# If programme is outside of requested timeframe then drop it
								my $p_start = $t_prog_label->look_down('_tag' => 'time', 'class' => qr/dtstart/)->attr('datetime');
								$p_start = epoch_isotime($p_start);
								next if $p_start < $grab_start  ||  $p_start >= $grab_end;
								
								
								$p_dtstart = xmltv_isotime( $t_prog_label->look_down('_tag' => 'time', 'class' => qr/dtstart/)->attr('datetime') );
								$p_dtend = xmltv_isotime( $t_prog_label->look_down('_tag' => 'time', 'class' => qr/dtend/)->attr('datetime') );
								
								# it seems the stop times aren't to be trusted
								# 	- on Sub tv they seem to be the actual stop times of the programme (i.e. start + duration), i.e. excludes trailers/ads before next prog (so causing gaps)
								#    - on Areena and Ava they're often 1 or 2 minutes *after* the start of the next prog (so causing overlaps).
								undef $p_dtend;
								 
								$t_prog_title = $t_prog_label->look_down('_tag' => 'div', 'class' => qr/program-title/);
								$p_title = $t_prog_title->look_down('_tag' => 'a', 'class' => qr/link-grey/)->as_text();
								
								# the  <div class="program-title">  may contain  <span class="movie">Film</span>  if prog is a film
								if ( $t_prog_film = $t_prog_title->look_down('_tag' => 'span', 'class' => qr/movie/) ) {
									$p_category = $t_prog_film->as_text();
                                }
      
								$p_desc = $t_prog_desc->look_down('_tag' => 'p')->as_text();   # desc is in first <p>
								$t_prog_link = $t_prog_desc->look_down('_tag' => 'a', 'class' => qr/double-angle/, sub { return $_[0]->as_text() =~ /Programinformation/ });
								$p_url = $t_prog_link->attr('href') if $t_prog_link;
								
								
								# occasionally it seems there's a 'null' programme (usually with overlapping time)
								# I think we should drop these
								next if $p_title eq '';
								
								
								# Create the data structure for the program.
								my $program =
                                {
										'channel' => $c_channel_id,
										'title' => [[ encode('iso-8859-1', $p_title), $LANGUAGE_CODE ]],
										'start' => $p_dtstart
								};
                $program->{'stop'} = $p_dtend  if (defined $p_dtend && $p_dtend ne '');
                $program->{'desc'} = [[ encode('iso-8859-1', tidy( $p_desc) ), $LANGUAGE_CODE ]]  if (defined $p_desc && $p_desc ne '');
                $program->{'sub-title'} = [[ encode('iso-8859-1', $p_subtitle), $LANGUAGE_CODE ]]  if (defined $p_subtitle && $p_subtitle ne '');
								$program->{'category'} = [[ encode('iso-8859-1', $p_category) ]]  if (defined $p_category && $p_category ne '');
                $program->{'url'} = [ $p_url ]  if (defined $p_url && $p_url ne '');
								
								
								# store the programme avoiding duplicates
								# also check for deuplicate start times and set clumpidx
								if ( defined $programmes->{$c_channel_id}->{$p_dtstart} ) {
									# duplicate prog or contemporary?
									my $dup = 0;
									foreach my $p ( @{ $programmes->{$c_channel_id}->{$p_dtstart} } ) {
										$dup = 1  if ( $p->{'title'}[0][0] eq $program->{'title'}[0][0] );		# duplicate
									}
									next if $dup;		# ignore duplicates
									if (!$dup) { 
										# contemporary programme so set clumpidx
										my $numclumps = scalar @{ $programmes->{$c_channel_id}->{$p_dtstart} }  + 1;
										# set (or adjust) clumpidx of existing programmes
										my $i = 0;
										foreach my $p ( @{ $programmes->{$c_channel_id}->{$p_dtstart} } ) {
											$p->{'clumpidx'} = "$i/$numclumps";
											$i++;
                                }
										# set clumpidx for new programme
										$program->{'clumpidx'} = "$i/$numclumps";
			    }
			    }
									
								# store the programme
								push @{ $programmes->{$c_channel_id}->{$p_dtstart} }, $program;
			}
		    }
		}
		}


	        # All data has been gathered. We can now write the
		# program element to the output. 
		#
		foreach ( keys %{$programmes} ) {
			my $ch_progs = $programmes->{$_};
			foreach ( sort keys %{$ch_progs} ) {
				my $dt_progs  = $ch_progs->{$_};
				foreach (@{ $dt_progs }) {
					$writer->write_programme($_);
	    }
        }
    }
								
}

# Writes the XMLTV footer.
sub write_xmltv_footer
{
    t("\nWriting XMLTV footer\n");
    $writer->end;
}

# Remove bad chars from an element
sub tidy( $ ) {
    return $_[0] if !defined $_[0];	
    $_[0] =~ s/(\s)\xA0/$1/og;    # replace 'space-&nbsp;' with 'space'
    $_[0] =~ s/\xA0/ /og;         # replace any remaining &nbsp; with space
    $_[0] =~ s/\xAD//og;          # delete soft hyphens
    return $_[0];
}

# Trim function to remove whitespace from the start and end of the
# string.
sub trim ($)
{
    my $string = shift;
    $string =~ s/^\s+//;
    $string =~ s/\s+$//;
    return $string;
}

# Left trim function to remove leading whitespace.
sub ltrim ($)
{
    my $string = shift;
    $string =~ s/^\s+//;
    return $string;
}

# Strips HTML tags from a string.
sub strip_tags ($)
{
    my $string = shift;
    $string =~ s/<(?:[^>'"]*|(['"]).*?\1)*>//gs;
    return $string;
}

# Converts a DateTime + time of the form "09.45" to something suitable
# for XMLTV, i.e.  201010270945 +0300
sub xmltv_time ($$)
{
    my $date = shift;
    my $time = shift;

    my ($hour, $minute) = ($time =~ m|^(\d+)\.(\d+)$|);
    my $dt=$date->clone();
    if ($hour > 23)
    {
        $dt->add(days => 1);
        $hour -= 24;
    }
    $dt->set_hour($hour);
    $dt->set_minute($minute);

    return $dt->strftime('%Y%m%d%H%M%S %z');
}

# Converts a date + time of the form "09.45" to something suitable for
# XMLTV, i.e.  201010270945, and handle special semantics for an "end
# time" (related to date rollovers).
sub xmltv_end_time ($$)
{
    my $date = shift;
    my $start_time = shift;
    my $end_time = shift;

    if ($end_time lt $start_time)
    {
	# This program is spanning across a date boundary. We need to increase the
	# date part so that the end time gets produced correctly.
        # Clone to ensure that this adjustment is only for this timestamp!
        $date=$date->clone->add(days => 1);
    }

    return xmltv_time($date, $end_time);
}


# Converts a DateTime + time of the form "2014-04-12T09:00:00.000+03:00" to something suitable
# for XMLTV, i.e.  20140412090000 +0300
sub xmltv_isotime ($)
{
    my $time = shift;
		
		# let's not overthink this... just use a regexp!
		
		$time =~ s/[:-]//g;
		$time =~ /^(\d{8})T(\d{6}).*(\+\d{4})$/;
		return $1.$2.' '.$3;
}

# Converts a DateTime + time of the form "2014-04-12T09:00:00.000+03:00" to epoch time (local or utc)
sub epoch_isotime ($;$)
{
    my $time = shift;
		my $withoffset = shift;		# set to 1 to generate local epoch (else will get utc)
		my ($y, $m, $d, $h, $i, $s, $ms, $t, $th, $tm) = $time =~ /^(\d{4})-(\d{2})-(\d{2})T(\d{2}):(\d{2}):(\d{2})\.(\d{3})([\+-])(\d{2}):(\d{2})$/;
		$y -= 1900;
		$m -= 1;
		use POSIX;
		my $epoch = mktime($s, $i, $h, $d, $m, $y);
		if (defined $withoffset && $withoffset) {
			my $offset = ($th * 3600) + ($tm * 60);
			$epoch += $offset  if $t eq '+';
			$epoch -= $offset  if $t eq '-';
		}
		return $epoch;
}
xmltv-util 0.5.69-1 / usr / bin / tv_grab_fi_sv
