/usr/mips-linux-gnu/include/linux/hsi/cs-protocol.h is in linux-libc-dev-mips-cross 4.9.25-1cross1.
This file is owned by root:root, with mode 0o644.
The actual contents of the file can be viewed below.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 | /*
* cmt-speech interface definitions
*
* Copyright (C) 2008,2009,2010 Nokia Corporation. All rights reserved.
*
* Contact: Kai Vehmanen <kai.vehmanen@nokia.com>
* Original author: Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#ifndef _CS_PROTOCOL_H
#define _CS_PROTOCOL_H
#include <linux/types.h>
#include <linux/ioctl.h>
/* chardev parameters */
#define CS_DEV_FILE_NAME "/dev/cmt_speech"
/* user-space API versioning */
#define CS_IF_VERSION 2
/* APE kernel <-> user space messages */
#define CS_CMD_SHIFT 28
#define CS_DOMAIN_SHIFT 24
#define CS_CMD_MASK 0xff000000
#define CS_PARAM_MASK 0xffffff
#define CS_CMD(id, dom) \
(((id) << CS_CMD_SHIFT) | ((dom) << CS_DOMAIN_SHIFT))
#define CS_ERROR CS_CMD(1, 0)
#define CS_RX_DATA_RECEIVED CS_CMD(2, 0)
#define CS_TX_DATA_READY CS_CMD(3, 0)
#define CS_TX_DATA_SENT CS_CMD(4, 0)
/* params to CS_ERROR indication */
#define CS_ERR_PEER_RESET 0
/* ioctl interface */
/* parameters to CS_CONFIG_BUFS ioctl */
#define CS_FEAT_TSTAMP_RX_CTRL (1 << 0)
#define CS_FEAT_ROLLING_RX_COUNTER (2 << 0)
/* parameters to CS_GET_STATE ioctl */
#define CS_STATE_CLOSED 0
#define CS_STATE_OPENED 1 /* resource allocated */
#define CS_STATE_CONFIGURED 2 /* data path active */
/* maximum number of TX/RX buffers */
#define CS_MAX_BUFFERS_SHIFT 4
#define CS_MAX_BUFFERS (1 << CS_MAX_BUFFERS_SHIFT)
/* Parameters for setting up the data buffers */
struct cs_buffer_config {
__u32 rx_bufs; /* number of RX buffer slots */
__u32 tx_bufs; /* number of TX buffer slots */
__u32 buf_size; /* bytes */
__u32 flags; /* see CS_FEAT_* */
__u32 reserved[4];
};
/*
* struct for monotonic timestamp taken when the
* last control command was received
*/
struct cs_timestamp {
__u32 tv_sec; /* seconds */
__u32 tv_nsec; /* nanoseconds */
};
/*
* Struct describing the layout and contents of the driver mmap area.
* This information is meant as read-only information for the application.
*/
struct cs_mmap_config_block {
__u32 reserved1;
__u32 buf_size; /* 0=disabled, otherwise the transfer size */
__u32 rx_bufs; /* # of RX buffers */
__u32 tx_bufs; /* # of TX buffers */
__u32 reserved2;
/* array of offsets within the mmap area for each RX and TX buffer */
__u32 rx_offsets[CS_MAX_BUFFERS];
__u32 tx_offsets[CS_MAX_BUFFERS];
__u32 rx_ptr;
__u32 rx_ptr_boundary;
__u32 reserved3[2];
/* enabled with CS_FEAT_TSTAMP_RX_CTRL */
struct cs_timestamp tstamp_rx_ctrl;
};
#define CS_IO_MAGIC 'C'
#define CS_IOW(num, dtype) _IOW(CS_IO_MAGIC, num, dtype)
#define CS_IOR(num, dtype) _IOR(CS_IO_MAGIC, num, dtype)
#define CS_IOWR(num, dtype) _IOWR(CS_IO_MAGIC, num, dtype)
#define CS_IO(num) _IO(CS_IO_MAGIC, num)
#define CS_GET_STATE CS_IOR(21, unsigned int)
#define CS_SET_WAKELINE CS_IOW(23, unsigned int)
#define CS_GET_IF_VERSION CS_IOR(30, unsigned int)
#define CS_CONFIG_BUFS CS_IOW(31, struct cs_buffer_config)
#endif /* _CS_PROTOCOL_H */
|