gimp-data 2.8.18-1+deb9u1 / etc / gimp / 2.0 / gimprc

# This is the system-wide gimprc file.  Any change made in this file will
# affect all users of this system, provided that they are not overriding the
# default values in their personal gimprc file.
# 
# Lines that start with a '#' are comments. Blank lines are ignored.
# 
# By default everything in this file is commented out.  The file then
# documents the default values and shows what changes are possible.
# 
# The variable ${gimp_dir} is set to the value of the environment variable
# GIMP2_DIRECTORY or, if that is not set, the compiled-in default value is
# used.  If GIMP2_DIRECTORY is not an absolute path, it is interpreted
# relative to your home directory.

# Sets the folder for temporary storage. Files will appear here during the
# course of running GIMP.  Most files will disappear when GIMP exits, but
# some files are likely to remain, so it is best if this folder not be one
# that is shared by other users.  This is a single folder.
# 
# (temp-path "${gimp_dir}/tmp")

# Sets the swap file location. GIMP uses a tile based memory allocation
# scheme. The swap file is used to quickly and easily swap tiles out to disk
# and back in. Be aware that the swap file can easily get very large if GIMP
# is used with large images. Also, things can get horribly slow if the swap
# file is created on a folder that is mounted over NFS.  For these reasons,
# it may be desirable to put your swap file in "/tmp".  This is a single
# folder.
# 
# (swap-path "${gimp_dir}")

# Sets how many processors GIMP should try to use simultaneously.  This is an
# integer value.
# 
# (num-processors 1)

# When the amount of pixel data exceeds this limit, GIMP will start to swap
# tiles to disk.  This is a lot slower but it makes it possible to work on
# images that wouldn't fit into memory otherwise.  If you have a lot of RAM,
# you may want to set this to a higher value.  The integer size can contain a
# suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the size as being
# specified in bytes, kilobytes, megabytes or gigabytes. If no suffix is
# specified the size defaults to being specified in kilobytes.
# 
# (tile-cache-size 1034406k)

# Specifies the language to use for the user interface.  This is a string
# value.
# 
# 

# Sets the level of interpolation used for scaling and other transformations.
#  Possible values are none, linear, cubic and lanczos.
# 
# (interpolation-type cubic)

# Tools such as fuzzy-select and bucket fill find regions based on a
# seed-fill algorithm.  The seed fill starts at the initially selected pixel
# and progresses in all directions until the difference of pixel intensity
# from the original is greater than a specified threshold. This value
# represents the default threshold.  This is an integer value.
# 
# (default-threshold 15)

# Sets the plug-in search path.  This is a colon-separated list of folders to
# search.
# 
# (plug-in-path "${gimp_dir}/plug-ins:${gimp_plug_in_dir}/plug-ins")

# Sets the module search path.  This is a colon-separated list of folders to
# search.
# 
# (module-path "${gimp_dir}/modules:${gimp_plug_in_dir}/modules")

# Sets the interpreter search path.  This is a colon-separated list of
# folders to search.
# 
# (interpreter-path "${gimp_dir}/interpreters:${gimp_plug_in_dir}/interpreters")

# Sets the environ search path.  This is a colon-separated list of folders to
# search.
# 
# (environ-path "${gimp_dir}/environ:${gimp_plug_in_dir}/environ")

# Sets the brush search path.  This is a colon-separated list of folders to
# search.
# 
# (brush-path "${gimp_dir}/brushes:${gimp_data_dir}/brushes")

# This is a colon-separated list of folders to search.
# 
# (brush-path-writable "${gimp_dir}/brushes")

# Sets the dynamics search path.  This is a colon-separated list of folders
# to search.
# 
# (dynamics-path "${gimp_dir}/dynamics:${gimp_data_dir}/dynamics")

# This is a colon-separated list of folders to search.
# 
# (dynamics-path-writable "${gimp_dir}/dynamics")

# Sets the pattern search path.  This is a colon-separated list of folders to
# search.
# 
# (pattern-path "${gimp_dir}/patterns:${gimp_data_dir}/patterns")

# This is a colon-separated list of folders to search.
# 
# (pattern-path-writable "${gimp_dir}/patterns")

# Sets the palette search path.  This is a colon-separated list of folders to
# search.
# 
# (palette-path "${gimp_dir}/palettes:${gimp_data_dir}/palettes")

# This is a colon-separated list of folders to search.
# 
# (palette-path-writable "${gimp_dir}/palettes")

# Sets the gradient search path.  This is a colon-separated list of folders
# to search.
# 
# (gradient-path "${gimp_dir}/gradients:${gimp_data_dir}/gradients")

# This is a colon-separated list of folders to search.
# 
# (gradient-path-writable "${gimp_dir}/gradients")

# Sets the dynamics search path.  This is a colon-separated list of folders
# to search.
# 
# (tool-preset-path "${gimp_dir}/tool-presets:${gimp_data_dir}/tool-presets")

# This is a colon-separated list of folders to search.
# 
# (tool-preset-path-writable "${gimp_dir}/tool-presets")

# Where to look for fonts in addition to the system-wide installed fonts. 
# This is a colon-separated list of folders to search.
# 
# (font-path "${gimp_dir}/fonts:${gimp_data_dir}/fonts")

# Specify a default brush.  The brush is searched for in the specified brush
# path.  This is a string value.
# 
# (default-brush "Round Fuzzy")

# Specify a default dynamics.  The dynamics is searched for in the specified
# dynamics path.  This is a string value.
# 
# (default-dynamics "Dynamics Off")

# Specify a default pattern.  This is a string value.
# 
# (default-pattern "Pine")

# Specify a default palette.  This is a string value.
# 
# (default-palette "Default")

# Specify a default gradient.  This is a string value.
# 
# (default-gradient "FG to BG (RGB)")

# Specify a default tool preset.  The tool preset is searched for in the
# specified tool prests path.  This is a string value.
# 
# (default-tool-preset "Current Options")

# Specify a default font.  This is a string value.
# 
# (default-font "Sans")

# When enabled, the selected brush will be used for all tools.  Possible
# values are yes and no.
# 
# (global-brush yes)

# When enabled, the selected dynamics will be used for all tools.  Possible
# values are yes and no.
# 
# (global-dynamics yes)

# When enabled, the selected pattern will be used for all tools.  Possible
# values are yes and no.
# 
# (global-pattern yes)

# When enabled, the selected palette will be used for all tools.  Possible
# values are yes and no.
# 
# (global-palette yes)

# When enabled, the selected gradient will be used for all tools.  Possible
# values are yes and no.
# 
# (global-gradient yes)

# When enabled, the selected font will be used for all tools.  Possible
# values are yes and no.
# 
# (global-font yes)

# Sets the default image in the "File/New" dialog.  This is a parameter list.
# 
# (default-image
#     (width 640)
#     (height 400)
#     (unit pixels)
#     (xresolution 72.000000)
#     (yresolution 72.000000)
#     (resolution-unit inches)
#     (image-type rgb)
#     (fill-type background-fill)
#     (comment "Created with GIMP"))

# Specify a default image grid.  This is a parameter list.
# 
# (default-grid
#     (style solid)
#     (fgcolor (color-rgba 0.000000 0.000000 0.000000 1.000000))
#     (bgcolor (color-rgba 1.000000 1.000000 1.000000 1.000000))
#     (xspacing 10.000000)
#     (yspacing 10.000000)
#     (spacing-unit inches)
#     (xoffset 0.000000)
#     (yoffset 0.000000)
#     (offset-unit inches))

# Sets the minimal number of operations that can be undone. More undo levels
# are kept available until the undo-size limit is reached.  This is an
# integer value.
# 
# (undo-levels 5)

# Sets an upper limit to the memory that is used per image to keep operations
# on the undo stack. Regardless of this setting, at least as many undo-levels
# as configured can be undone.  The integer size can contain a suffix of 'B',
# 'K', 'M' or 'G' which makes GIMP interpret the size as being specified in
# bytes, kilobytes, megabytes or gigabytes. If no suffix is specified the
# size defaults to being specified in kilobytes.
# 
# (undo-size 64M)

# Sets the size of the previews in the Undo History.  Possible values are
# tiny, extra-small, small, medium, large, extra-large, huge, enormous and
# gigantic.
# 
# (undo-preview-size large)

# How many recently used plug-ins to keep on the Filters menu.  This is an
# integer value.
# 
# (plug-in-history-size 10)

# Sets the pluginrc search path.  This is a single filename.
# 
# (pluginrc-path "${gimp_dir}/pluginrc")

# Sets whether GIMP should create previews of layers and channels. Previews
# in the layers and channels dialog are nice to have but they can slow things
# down when working with large images.  Possible values are yes and no.
# 
# (layer-previews yes)

# Sets the preview size used for layers and channel previews in newly created
# dialogs.  Possible values are tiny, extra-small, small, medium, large,
# extra-large, huge, enormous and gigantic.
# 
# (layer-preview-size medium)

# Sets the size of the thumbnail shown in the Open dialog.  Possible values
# are none, normal and large.
# 
# (thumbnail-size normal)

# The thumbnail in the Open dialog will be automatically updated if the file
# being previewed is smaller than the size set here.  The integer size can
# contain a suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the
# size as being specified in bytes, kilobytes, megabytes or gigabytes. If no
# suffix is specified the size defaults to being specified in kilobytes.
# 
# (thumbnail-filesize-limit 4M)

# Defines the color management behavior.  This is a parameter list.
# 
# (color-management
#     (mode display)
#     (display-profile-from-gdk no)
#     (display-rendering-intent perceptual)
#     (simulation-rendering-intent perceptual)
#     (simulation-gamut-check no)
#     (out-of-gamut-color (color-rgb 0.501961 0.501961 0.501961))
#     (display-module "CdisplayLcms"))

# How to handle embedded color profiles when opening a file.  Possible values
# are ask, keep and convert.
# 
# (color-profile-policy ask)

# Keep a permanent record of all opened and saved files in the Recent
# Documents list.  Possible values are yes and no.
# 
# (save-document-history yes)

# Sets the default quick mask color.  The color is specified in the form
# (color-rgba red green blue alpha) with channel values as floats in the
# range of 0.0 to 1.0.
# 
# (quick-mask-color (color-rgba 1.000000 0.000000 0.000000 0.500000))

# Sets the size of the checkerboard used to display transparency.  Possible
# values are small-checks, medium-checks and large-checks.
# 
# (transparency-size medium-checks)

# Sets the manner in which transparency is displayed in images.  Possible
# values are light-checks, gray-checks, dark-checks, white-only, gray-only
# and black-only.
# 
# (transparency-type gray-checks)

# This is the distance in pixels where Guide and Grid snapping activates. 
# This is an integer value.
# 
# (snap-distance 8)

# Speed of marching ants in the selection outline.  This value is in
# milliseconds (less time indicates faster marching).  This is an integer
# value.
# 
# (marching-ants-speed 200)

# When enabled, the image window will automatically resize itself when
# zooming into and out of images.  Possible values are yes and no.
# 
# (resize-windows-on-zoom no)

# When enabled, the image window will automatically resize itself whenever
# the physical image size changes.  Possible values are yes and no.
# 
# (resize-windows-on-resize no)

# When enabled, this will ensure that each pixel of an image gets mapped to a
# pixel on the screen.  Possible values are yes and no.
# 
# (default-dot-for-dot yes)

# When enabled, this will ensure that the full image is visible after a file
# is opened, otherwise it will be displayed with a scale of 1:1.  Possible
# values are yes and no.
# 
# (initial-zoom-to-fit yes)

# When enabled, the X server is queried for the mouse's current position on
# each motion event, rather than relying on the position hint.  This means
# painting with large brushes should be more accurate, but it may be slower. 
# Conversely, on some X servers enabling this option results in faster
# painting.  Possible values are yes and no.
# 
# (perfect-mouse yes)

# Sets the type of mouse pointers to use.  Possible values are tool-icon,
# tool-crosshair and crosshair.
# 
# (cursor-mode tool-icon)

# Context-dependent mouse pointers are helpful.  They are enabled by default.
#  However, they require overhead that you may want to do without.  Possible
# values are yes and no.
# 
# (cursor-updating yes)

# When enabled, all paint tools will show a preview of the current brush's
# outline.  Possible values are yes and no.
# 
# (show-brush-outline yes)

# When enabled, the mouse pointer will be shown over the image while using a
# paint tool.  Possible values are yes and no.
# 
# (show-paint-tool-cursor yes)

# Sets the text to appear in image window titles.  This is a format string;
# certain % character sequences are recognised and expanded as follows:
# 
# %%  literal percent sign
# %f  bare filename, or "Untitled"
# %F  full path to file, or "Untitled"
# %p  PDB image id
# %i  view instance number
# %t  image type (RGB, grayscale, indexed)
# %z  zoom factor as a percentage
# %s  source scale factor
# %d  destination scale factor
# %Dx expands to x if the image is dirty, the empty string otherwise
# %Cx expands to x if the image is clean, the empty string otherwise
# %B  expands to (modified) if the image is dirty, the empty string otherwise
# %A  expands to (clean) if the image is clean, the empty string otherwise
# %l  the number of layers
# %L  the number of layers (long form)
# %m  memory used by the image
# %n  the name of the active layer/channel
# %P  the PDB id of the active layer/channel
# %w  image width in pixels
# %W  image width in real-world units
# %h  image height in pixels
# %H  image height in real-world units
# %M  the image size expressed in megapixels
# %u  unit symbol
# %U  unit abbreviation
# 
# 
# (image-title-format "%D*%f-%p.%i (%t, %L) %wx%h")

# Sets the text to appear in image window status bars.  This is a format
# string; certain % character sequences are recognised and expanded as
# follows:
# 
# %%  literal percent sign
# %f  bare filename, or "Untitled"
# %F  full path to file, or "Untitled"
# %p  PDB image id
# %i  view instance number
# %t  image type (RGB, grayscale, indexed)
# %z  zoom factor as a percentage
# %s  source scale factor
# %d  destination scale factor
# %Dx expands to x if the image is dirty, the empty string otherwise
# %Cx expands to x if the image is clean, the empty string otherwise
# %B  expands to (modified) if the image is dirty, the empty string otherwise
# %A  expands to (clean) if the image is clean, the empty string otherwise
# %l  the number of layers
# %L  the number of layers (long form)
# %m  memory used by the image
# %n  the name of the active layer/channel
# %P  the PDB id of the active layer/channel
# %w  image width in pixels
# %W  image width in real-world units
# %h  image height in pixels
# %H  image height in real-world units
# %M  the image size expressed in megapixels
# %u  unit symbol
# %U  unit abbreviation
# 
# 
# (image-status-format "%n (%m)")

# Sets the monitor's horizontal resolution, in dots per inch.  If set to 0,
# forces the X server to be queried for both horizontal and vertical
# resolution information.  This is a float value.
# 
# (monitor-xresolution 96.000000)

# Sets the monitor's vertical resolution, in dots per inch.  If set to 0,
# forces the X server to be queried for both horizontal and vertical
# resolution information.  This is a float value.
# 
# (monitor-yresolution 96.000000)

# When enabled, GIMP will use the monitor resolution from the windowing
# system.  Possible values are yes and no.
# 
# (monitor-resolution-from-windowing-system yes)

# Sets the size of the navigation preview available in the lower right corner
# of the image window.  Possible values are tiny, extra-small, small, medium,
# large, extra-large, huge, enormous and gigantic.
# 
# (navigation-preview-size medium)

# Sets the default settings for the image view.  This is a parameter list.
# 
# (default-view
#     (show-menubar yes)
#     (show-statusbar yes)
#     (show-rulers yes)
#     (show-scrollbars yes)
#     (show-selection yes)
#     (show-layer-boundary yes)
#     (show-guides yes)
#     (show-grid no)
#     (show-sample-points yes)
#     (padding-mode default)
#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))

# Sets the default settings used when an image is viewed in fullscreen mode. 
# This is a parameter list.
# 
# (default-fullscreen-view
#     (show-menubar yes)
#     (show-statusbar yes)
#     (show-rulers yes)
#     (show-scrollbars yes)
#     (show-selection yes)
#     (show-layer-boundary yes)
#     (show-guides yes)
#     (show-grid no)
#     (show-sample-points yes)
#     (padding-mode default)
#     (padding-color (color-rgb 1.000000 1.000000 1.000000)))

# Snap to guides by default in new image windows.  Possible values are yes
# and no.
# 
# (default-snap-to-guides yes)

# Snap to the grid by default in new image windows.  Possible values are yes
# and no.
# 
# (default-snap-to-grid no)

# Snap to the canvas edge by default in new image windows.  Possible values
# are yes and no.
# 
# (default-snap-to-canvas no)

# Snap to the active path by default in new image windows.  Possible values
# are yes and no.
# 
# (default-snap-to-path no)

# When enabled, an image will become the active image when its image window
# receives the focus. This is useful for window managers using "click to
# focus".  Possible values are yes and no.
# 
# (activate-on-focus yes)

# What to do when the space bar is pressed in the image window.  Possible
# values are none, pan and move.
# 
# (space-bar-action pan)

# There's a tradeoff between speed and quality of the zoomed-out display. 
# Possible values are low and high.
# 
# (zoom-quality high)

# Bugs in event history buffer are frequent so in case of cursor offset
# problems turning it off helps.  Possible values are yes and no.
# 
# (use-event-history no)

# If enabled, the move tool sets the edited layer or path as active.  This
# used to be the default behaviour in older versions.  Possible values are
# yes and no.
# 
# (move-tool-changes-active no)

# How many recent settings to keep around in color correction tools  This is
# an integer value.
# 
# (image-map-tool-max-recent 10)

# When enabled, GIMP will not save an image if it has not been changed since
# it was opened.  Possible values are yes and no.
# 
# (trust-dirty-flag no)

# Remember the current tool, pattern, color, and brush across GIMP sessions. 
# Possible values are yes and no.
# 
# (save-device-status no)

# Save the positions and sizes of the main dialogs when GIMP exits.  Possible
# values are yes and no.
# 
# (save-session-info yes)

# Let GIMP try to restore your last saved session on each startup.  Possible
# values are yes and no.
# 
# (restore-session yes)

# Save the tool options when GIMP exits.  Possible values are yes and no.
# 
# (save-tool-options no)

# Show a tooltip when the pointer hovers over an item.  Possible values are
# yes and no.
# 
# (show-tooltips yes)

# When enabled, menus can be torn off.  Possible values are yes and no.
# 
# (tearoff-menus yes)

# When enabled, you can change keyboard shortcuts for menu items by hitting a
# key combination while the menu item is highlighted.  Possible values are
# yes and no.
# 
# (can-change-accels no)

# Save changed keyboard shortcuts when GIMP exits.  Possible values are yes
# and no.
# 
# (save-accels yes)

# Restore saved keyboard shortcuts on each GIMP startup.  Possible values are
# yes and no.
# 
# (restore-accels yes)

# How many recently opened image filenames to keep on the File menu.  This is
# an integer value.
# 
# (last-opened-size 10)

# GIMP will warn the user if an attempt is made to create an image that would
# take more memory than the size specified here.  The integer size can
# contain a suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the
# size as being specified in bytes, kilobytes, megabytes or gigabytes. If no
# suffix is specified the size defaults to being specified in kilobytes.
# 
# (max-new-image-size 128M)

# Show the current foreground and background colors in the toolbox.  Possible
# values are yes and no.
# 
# (toolbox-color-area yes)

# Show the currently selected brush, pattern and gradient in the toolbox. 
# Possible values are yes and no.
# 
# (toolbox-foo-area no)

# Show the currently active image in the toolbox.  Possible values are yes
# and no.
# 
# (toolbox-image-area no)

# Show the GIMP mascot at the top of the toolbox.  Possible values are yes
# and no.
# 
# (toolbox-wilber yes)

# Sets the theme search path.  This is a colon-separated list of folders to
# search.
# 
# (theme-path "${gimp_dir}/themes:${gimp_data_dir}/themes")

# The name of the theme to use.  This is a string value.
# 
# (theme "Default")

# When enabled, pressing F1 will open the help browser.  Possible values are
# yes and no.
# 
# (use-help yes)

# When enabled, dialogs will show a help button that gives access to the
# related help page.  Without this button, the help page can still be reached
# by pressing F1.  Possible values are yes and no.
# 
# (show-help-button yes)

# Specifies the language preferences used by the help system. This is a
# colon-separated list of language identifiers with decreasing priority. If
# empty, the language is taken from the user's locale setting.  This is a
# string value.
# 
# (help-locales "")

# Sets the browser used by the help system.  Possible values are gimp and
# web-browser.
# 
(help-browser web-browser)

# When enabled, the online user manual will be used by the help system.
# Otherwise the locally installed copy is used.  Possible values are yes and
# no.
# 
# (user-manual-online no)

# The location of the online user manual. This is used if
# 'user-manual-online' is enabled.  This is a string value.
# 
# (user-manual-online-uri "http://docs.gimp.org/2.8")

# The window type hint that is set on dock windows and the toolbox window.
# This may affect the way your window manager decorates and handles these
# windows.  Possible values are normal, utility and keep-above.
# 
# (dock-window-hint utility)

# Sets the pixel format to use for mouse pointers.  Possible values are
# bitmap and pixbuf.
# 
# (cursor-format pixbuf)

# Sets the handedness for cursor positioning.  Possible values are left and
# right.
# 
# (cursor-handedness right)

# Where to search for fractals used by the Fractal Explorer plug-in.  This is
# a colon-separated list of folders to search.
# 
# (fractalexplorer-path "${gimp_dir}/fractalexplorer:${gimp_data_dir}/fractalexplorer")

# Where to search for Gfig figures used by the Gfig plug-in.  This is a
# colon-separated list of folders to search.
# 
# (gfig-path "${gimp_dir}/gfig:${gimp_data_dir}/gfig")

# Where to search for gflares used by the GFlare plug-in.  This is a
# colon-separated list of folders to search.
# 
# (gflare-path "${gimp_dir}/gflare:${gimp_data_dir}/gflare")

# Where to search for data used by the Gimpressionist plug-in.  This is a
# colon-separated list of folders to search.
# 
# (gimpressionist-path "${gimp_dir}/gimpressionist:${gimp_data_dir}/gimpressionist")

# This path will be searched for scripts when the Script-Fu plug-in is run. 
# This is a colon-separated list of folders to search.
# 
# (script-fu-path "${gimp_dir}/scripts:${gimp_data_dir}/scripts")